Bump hekate to v5.5.3 and Nyx to v0.9.9

The thermal measurement substrate transistor was changed in Mariko SoCs.
This ensures that it's properly offset by -12.5 °C.

.gitignore

@@ -2,3 +2,7 @@
 .vscode
 build/*
 output/*
+loader/payload_00.h
+loader/payload_01.h
+tools/bin2c/bin2c
+tools/lz/lz77

Makefile

@@ -16,7 +16,10 @@ TARGET := hekate
 BUILDDIR := build
 OUTPUTDIR := output
 SOURCEDIR = bootloader
+BDKDIR := bdk
+BDKINC := -I./$(BDKDIR)
 VPATH = $(dir ./$(SOURCEDIR)/) $(dir $(wildcard ./$(SOURCEDIR)/*/)) $(dir $(wildcard ./$(SOURCEDIR)/*/*/))
+VPATH += $(dir $(wildcard ./$(BDKDIR)/)) $(dir $(wildcard ./$(BDKDIR)/*/)) $(dir $(wildcard ./$(BDKDIR)/*/*/))
 
 # Main and graphics.
 OBJS = $(addprefix $(BUILDDIR)/$(TARGET)/, \
@@ -28,8 +31,8 @@ OBJS = $(addprefix $(BUILDDIR)/$(TARGET)/, \
 
 # Hardware.
 OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
-	bpmp.o clock.o cluster.o di.o gpio.o i2c.o irq.o mc.o sdram.o \
-	pinmux.o se.o smmu.o tsec.o uart.o \
+	bpmp.o ccplex.o clock.o di.o gpio.o i2c.o irq.o mc.o sdram.o \
+	pinmux.o pmc.o se.o smmu.o tsec.o uart.o \
 	fuse.o kfuse.o minerva.o \
 	sdmmc.o sdmmc_driver.o emummc.o nx_emmc.o nx_sd.o \
 	bq24193.o max17050.o max7762x.o max77620-rtc.o \
@@ -49,64 +52,96 @@ OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
 
 # Libraries.
 OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
-	lz.o blz.o \
+	lz.o lz4.o blz.o \
 	diskio.o ff.o ffunicode.o ffsystem.o \
 	elfload.o elfreloc_arm.o \
 )
 
+GFX_INC   := '"../$(SOURCEDIR)/gfx/gfx.h"'
+FFCFG_INC := '"../$(SOURCEDIR)/libs/fatfs/ffconf.h"'
+
 ################################################################################
 
 CUSTOMDEFINES := -DIPL_LOAD_ADDR=$(IPL_LOAD_ADDR) -DBL_MAGIC=$(IPL_MAGIC)
 CUSTOMDEFINES += -DBL_VER_MJ=$(BLVERSION_MAJOR) -DBL_VER_MN=$(BLVERSION_MINOR) -DBL_VER_HF=$(BLVERSION_HOTFX) -DBL_RESERVED=$(BLVERSION_RSVD)
 CUSTOMDEFINES += -DNYX_VER_MJ=$(NYXVERSION_MAJOR) -DNYX_VER_MN=$(NYXVERSION_MINOR) -DNYX_VER_HF=$(NYXVERSION_HOTFX) -DNYX_RESERVED=$(NYXVERSION_RSVD)
-#CUSTOMDEFINES += -DMENU_LOGO_ENABLE
-
-# 0: UART_A, 1: UART_B.
-#CUSTOMDEFINES += -DDEBUG_UART_PORT=0
+CUSTOMDEFINES += -DGFX_INC=$(GFX_INC) -DFFCFG_INC=$(FFCFG_INC)
 
 #CUSTOMDEFINES += -DDEBUG
 
+# UART Logging: Max baudrate 12.5M.
+# DEBUG_UART_PORT - 0: UART_A, 1: UART_B, 2: UART_C.
+#CUSTOMDEFINES += -DDEBUG_UART_BAUDRATE=115200 -DDEBUG_UART_INVERT=0 -DDEBUG_UART_PORT=0
+
 ARCH := -march=armv4t -mtune=arm7tdmi -mthumb -mthumb-interwork
-CFLAGS = $(ARCH) -O2 -nostdlib -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-inline -std=gnu11 -Wall $(CUSTOMDEFINES)
+CFLAGS = $(ARCH) -O2 -g -nostdlib -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-inline -std=gnu11 -Wall $(CUSTOMDEFINES)
 LDFLAGS = $(ARCH) -nostartfiles -lgcc -Wl,--nmagic,--gc-sections -Xlinker --defsym=IPL_LOAD_ADDR=$(IPL_LOAD_ADDR)
 
 MODULEDIRS := $(wildcard modules/*)
 NYXDIR := $(wildcard nyx)
+LDRDIR := $(wildcard loader)
+TOOLSLZ := $(wildcard tools/lz)
+TOOLSB2C := $(wildcard tools/bin2c)
+TOOLS := $(TOOLSLZ) $(TOOLSB2C)
 
 ################################################################################
 
-.PHONY: all clean $(MODULEDIRS) $(NYXDIR)
+.PHONY: all clean $(MODULEDIRS) $(NYXDIR) $(LDRDIR) $(TOOLS)
 
-all: $(TARGET).bin
-	@echo -n "Payload size is "
+all: $(TARGET).bin $(LDRDIR)
+	@printf ICTC49 >> $(OUTPUTDIR)/$(TARGET).bin
+	@echo "--------------------------------------"
+	@echo -n "Uncompr size: "
+	$(eval BIN_SIZE = $(shell wc -c < $(OUTPUTDIR)/$(TARGET)_unc.bin))
+	@echo $(BIN_SIZE)" Bytes"
+	@echo "Uncompr Max:  140288 Bytes + 3 KiB BSS"
+	@if [ ${BIN_SIZE} -gt 140288 ]; then echo "\e[1;33mUncompr size exceeds limit!\e[0m"; fi
+	@echo -n "Payload size: "
 	$(eval BIN_SIZE = $(shell wc -c < $(OUTPUTDIR)/$(TARGET).bin))
-	@echo $(BIN_SIZE)
-	@echo "Max size is     126296 Bytes."
+	@echo $(BIN_SIZE)" Bytes"
+	@echo "Payload Max:  126296 Bytes"
 	@if [ ${BIN_SIZE} -gt 126296 ]; then echo "\e[1;33mPayload size exceeds limit!\e[0m"; fi
+	@echo "--------------------------------------"
 
-clean:
+clean: $(TOOLS)
 	@rm -rf $(OBJS)
 	@rm -rf $(BUILDDIR)
 	@rm -rf $(OUTPUTDIR)
 
 $(MODULEDIRS):
-	$(MAKE) -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
+	@$(MAKE) --no-print-directory -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
 
 $(NYXDIR):
-	$(MAKE) -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
+	@$(MAKE) --no-print-directory -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
 
-$(TARGET).bin: $(BUILDDIR)/$(TARGET)/$(TARGET).elf $(MODULEDIRS) $(NYXDIR)
+$(LDRDIR): $(TARGET).bin
+	@$(TOOLSLZ)/lz77 $(OUTPUTDIR)/$(TARGET).bin
+	mv $(OUTPUTDIR)/$(TARGET).bin $(OUTPUTDIR)/$(TARGET)_unc.bin
+	@mv $(OUTPUTDIR)/$(TARGET).bin.00.lz payload_00
+	@mv $(OUTPUTDIR)/$(TARGET).bin.01.lz payload_01
+	@$(TOOLSB2C)/bin2c payload_00 > $(LDRDIR)/payload_00.h
+	@$(TOOLSB2C)/bin2c payload_01 > $(LDRDIR)/payload_01.h
+	@rm payload_00
+	@rm payload_01
+	@$(MAKE) --no-print-directory -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS) PAYLOAD_NAME=$(TARGET)
+
+$(TOOLS):
+	@$(MAKE) --no-print-directory -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
+
+$(TARGET).bin: $(BUILDDIR)/$(TARGET)/$(TARGET).elf $(MODULEDIRS) $(NYXDIR) $(TOOLS)
 	$(OBJCOPY) -S -O binary $< $(OUTPUTDIR)/$@
-	@printf ICTC49 >> $(OUTPUTDIR)/$@
 
 $(BUILDDIR)/$(TARGET)/$(TARGET).elf: $(OBJS)
-	$(CC) $(LDFLAGS) -T $(SOURCEDIR)/link.ld $^ -o $@
+	@$(CC) $(LDFLAGS) -T $(SOURCEDIR)/link.ld $^ -o $@
+	@echo "hekate was built with the following flags:\nCFLAGS:  "$(CFLAGS)"\nLDFLAGS: "$(LDFLAGS)
 
 $(BUILDDIR)/$(TARGET)/%.o: %.c
-	$(CC) $(CFLAGS) -c $< -o $@
+	@echo Building $@
+	@$(CC) $(CFLAGS) $(BDKINC) -c $< -o $@
 
 $(BUILDDIR)/$(TARGET)/%.o: %.S
-	$(CC) $(CFLAGS) -c $< -o $@
+	@echo Building $@
+	@$(CC) $(CFLAGS) -c $< -o $@
 
 $(OBJS): $(BUILDDIR)/$(TARGET)
 

README.md

@@ -1,9 +1,9 @@
-# hekate - CTCaer mod
+# hekate - Nyx
 
 ![Image of Hekate](https://user-images.githubusercontent.com/3665130/60391760-bc1e8c00-9afe-11e9-8b7a-b065873081b2.png)
 
 
-Custom Nintendo Switch bootloader, firmware patcher, and more.
+Custom Graphical Nintendo Switch bootloader, firmware patcher, tools, and many more.
 
 
 ## Bootloader folders and files
@@ -30,7 +30,7 @@ Custom Nintendo Switch bootloader, firmware patcher, and more.
 | bootloader/screenshots/  | Folder where Nyx screenshots are saved                                |
 | bootloader/payloads/     | For payloads. 'Payloads...' menu. Autoboot only supported by including them into an ini. All CFW bootloaders, tools, Linux payloads are supported. |
 | bootloader/libtools/     | Future reserved                                                       |
-| sept                     | Sept folder. This must be always get updated via the Atmosphère release zip. Needed for tools and booting HOS on 7.0.0 and up. Unused for booting HOS if `fss0=` key is defined. |
+| sept                     | Sept folder. This must always get updated via the Atmosphère release zip. Needed for tools and booting HOS on 7.0.0 and up. Unused for booting HOS if `fss0=` key is defined. |
 
 **Note**: Sept files for booting 7.0.0 and up are expected at /sept folder at root of sd card.
 
@@ -55,6 +55,7 @@ You can find a template [Here](./res/hekate_ipl_template.ini)
 | bootwait=3         | 0: Disable (It also disables bootlogo. Having **VOL-** pressed since injection goes to menu.), #: Time to wait for **VOL-** to enter menu. |
 | autohosoff=1       | 0: Disable, 1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely, 2: No logo, immediately powers off.|
 | autonogc=1         | 0: Disable, 1: Automatically applies nogc patch if unburnt fuses found and a >= 4.0.0 HOS is booted. |
+| bootprotect=0      | 0: Disable, 1: Protect bootloader folder from being corrupted by disallowing reading or editing in HOS. |
 | updater2p=0        | 0: Disable, 1: Force updates (if needed) the reboot2payload binary to be hekate. |
 | backlight=100      | Screen backlight level. 0-255.                             |
 
@@ -67,7 +68,9 @@ You can find a template [Here](./res/hekate_ipl_template.ini)
 | timeoff=100        | Sets time offset in HEX. Must be in HOS epoch format       |
 | homescreen=0       | Sets home screen. 0: Home menu, 1: All configs (merges Launch and More configs), 2: Launch, 3: More Configs. |
 | verification=1     | 0: Disable Backup/Restore verification, 1: Sparse (block based, fast and mostly reliable), 2: Full (sha256 based, slow and 100% reliable). |
-| umsemmcrw=1        | 1: eMMC/emuMMC UMS will be mounted as writable by default. |
+| umsemmcrw=0        | 1: eMMC/emuMMC UMS will be mounted as writable by default. |
+| jcdisable=0        | 1: Disables Joycon driver completely.                      |
+| newpowersave=1     | 0: Timer based, 1: DRAM frequency based (Better). Use 0 if Nyx hangs. |
 
 
 ### Boot entry key/value combinations:
@@ -81,13 +84,14 @@ You can find a template [Here](./res/hekate_ipl_template.ini)
 | kip1={SD folder}/*     | Loads every .kip/.kip1 inside a folder. Compatible with single kip1 keys. |
 | fss0={SD path}         | Takes a fusee-secondary binary and `extracts` all needed parts from it. kips, exosphere, warmboot and sept. |
 | fss0experimental=1     | Enables loading of experimental content from a FSS0 storage |
+| exofatal={SD path}     | Replaces the exosphere fatal binary for Mariko             |
 | kip1patch=patchname    | Enables a kip1 patch. Specify with multiple lines and/or as CSV. If not found, an error will show up |
 | fullsvcperm=1          | Disables SVC verification (full services permission)       |
 | debugmode=1            | Enables Debug mode. Obsolete when used with exosphere as secmon. |
 | atmosphere=1           | Enables Atmosphère patching.                               |
 | emupath={SD folder}    | Forces emuMMC to use the selected one. (=emuMMC/RAW1, =emuMMC/SD00, etc). emuMMC must be created by hekate because it uses the raw_based/file_based files. |
 | emummcforce=1          | Forces the use of emuMMC. If emummc.ini is disabled or not found, then it causes an error. |
-| emummc_force_disable=1 | Disables emuMMC if it's enabled.                           |
+| emummc_force_disable=1 | Disables emuMMC, if it's enabled.                           |
 | stock=1                | Disables unneeded kernel patching when running stock or semi-stock. `If emuMMC is enabled, emummc_force_disabled=1` is required. emuMMC is not supported on stock. If additional KIPs are needed other than OFW's, you can define them with `kip1` key. No kip should be used that relies on Atmosphère patching, because it will hang. If `NOGC` is needed, use `kip1patch=nogc`. |
 | id=idname              | Identifies boot entry for forced boot via id. Max 7 chars. |
 | payload={SD path}      | Payload launching. Tools, Linux, CFW bootloaders, etc.     |
@@ -120,11 +124,12 @@ hekate has a boot storage in the binary that helps it configure it outside of BP
 
 | Offset / Name           | Description                                                       |
 | ----------------------- | ----------------------------------------------------------------- |
-| '0x94' boot_cfg         | bit0: `Force AutoBoot`, bit1: `Show launch log`, bit2: Boot from ID, bit3: `Boot to emuMMC`, bit7: `sept run`. |
+| '0x94' boot_cfg         | bit0: `Force AutoBoot`, bit1: `Show launch log`, bit2: `Boot from ID`, bit3: `Boot to emuMMC`, bit7: `sept run`. |
 | '0x95' autoboot         | If `Force AutoBoot`: 0: Force go to menu, else boot that entry.   |
 | '0x96' autoboot_list    | If `Force AutoBoot` and `autoboot` then it boots from ini folder. |
-| '0x97' extra_cfg        | bit7: Force Nyx to run `Dump pkg1/2`.                             |
+| '0x97' extra_cfg        | When menu is forced: bit5: `Run UMS`, bit7: `Run Dump pkg1/2`.    |
 | '0x98' xt_str[128]      | Depends on the set cfg bits.                                      |
+| '0x98' ums[1]           | When `Run UMS` is set, it will launch the selected UMS. 0: SD, 1: eMMC BOOT0, 2: eMMC BOOT1, 3: eMMC GPP, 4: emuMMC BOOT0, 5: emuMMC BOOT1, 6: emuMMC GPP,  |
 | '0x98' id[8]            | When `Boot from ID` is set, it will search all inis automatically and find the boot entry with that id and boot it. Must be NULL terminated. |
 | '0xA0' emummc_path[120] | When `Boot to emuMMC` is set, it will override the current emuMMC (boot entry or emummc.ini). Must be NULL terminated. |
 

Versions.inc

@@ -1,11 +1,11 @@
 # IPL Version.
 BLVERSION_MAJOR := 5
-BLVERSION_MINOR := 2
-BLVERSION_HOTFX := 1
+BLVERSION_MINOR := 5
+BLVERSION_HOTFX := 3
 BLVERSION_RSVD := 0
 
 # Nyx Version.
 NYXVERSION_MAJOR := 0
 NYXVERSION_MINOR := 9
-NYXVERSION_HOTFX := 1
+NYXVERSION_HOTFX := 9
 NYXVERSION_RSVD := 0

bdk/display/di.c

@@ -0,0 +1,747 @@
+/*
+ * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2018-2020 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <string.h>
+
+#include "di.h"
+#include <power/max77620.h>
+#include <power/max7762x.h>
+#include <mem/heap.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <soc/hw_init.h>
+#include <soc/i2c.h>
+#include <soc/pinmux.h>
+#include <soc/pmc.h>
+#include <soc/t210.h>
+#include <utils/util.h>
+
+#include "di.inl"
+
+extern volatile nyx_storage_t *nyx_str;
+
+static u32 _display_id = 0;
+
+static void _display_panel_and_hw_end(bool no_panel_deinit);
+
+static void _display_dsi_wait(u32 timeout, u32 off, u32 mask)
+{
+	u32 end = get_tmr_us() + timeout;
+	while (get_tmr_us() < end && DSI(off) & mask)
+		;
+	usleep(5);
+}
+
+static void _display_dsi_send_cmd(u8 cmd, u32 param, u32 wait)
+{
+	DSI(_DSIREG(DSI_WR_DATA)) = (param << 8) | cmd;
+	DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
+
+	if (wait)
+		usleep(wait);
+}
+
+static void _display_dsi_read_rx_fifo(u32 *data)
+{
+	u32 fifo_count = DSI(_DSIREG(DSI_STATUS)) & DSI_STATUS_RX_FIFO_SIZE;
+	for (u32 i = 0; i < fifo_count; i++)
+	{
+		// Read or Drain RX FIFO.
+		if (data)
+			data[i] = DSI(_DSIREG(DSI_RD_DATA));
+		else
+			(void)DSI(_DSIREG(DSI_RD_DATA));
+	}
+}
+
+int display_dsi_read(u8 cmd, u32 len, void *data, bool video_enabled)
+{
+	int res = 0;
+	u32 host_control = 0;
+	u32 cmd_timeout = video_enabled ? 0 : 250000;
+	u32 fifo[DSI_STATUS_RX_FIFO_SIZE] = {0};
+
+	// Drain RX FIFO.
+	_display_dsi_read_rx_fifo(NULL);
+
+	// Save host control and enable host cmd packets during video.
+	if (video_enabled)
+	{
+		host_control = DSI(_DSIREG(DSI_HOST_CONTROL));
+
+		// Enable vblank interrupt.
+		DISPLAY_A(_DIREG(DC_CMD_INT_ENABLE)) = DC_CMD_INT_FRAME_END_INT;
+
+		// Use the 4th line to transmit the host cmd packet.
+		DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = DSI_CMD_PKT_VID_ENABLE | DSI_DSI_LINE_TYPE(4);
+
+		// Wait for vblank before starting the transfer.
+		DISPLAY_A(_DIREG(DC_CMD_INT_STATUS)) = DC_CMD_INT_FRAME_END_INT; // Clear interrupt.
+		while (DISPLAY_A(_DIREG(DC_CMD_INT_STATUS)) & DC_CMD_INT_FRAME_END_INT)
+			;
+	}
+
+	// Set reply size.
+	_display_dsi_send_cmd(MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, len, 0);
+	_display_dsi_wait(cmd_timeout, _DSIREG(DSI_TRIGGER), DSI_TRIGGER_HOST | DSI_TRIGGER_VIDEO);
+
+	// Request register read.
+	_display_dsi_send_cmd(MIPI_DSI_DCS_READ, cmd, 0);
+	_display_dsi_wait(cmd_timeout, _DSIREG(DSI_TRIGGER), DSI_TRIGGER_HOST | DSI_TRIGGER_VIDEO);
+
+	// Transfer bus control to device for transmitting the reply.
+	u32 high_speed = video_enabled ? DSI_HOST_CONTROL_HS : 0;
+	DSI(_DSIREG(DSI_HOST_CONTROL)) = DSI_HOST_CONTROL_TX_TRIG_HOST | DSI_HOST_CONTROL_IMM_BTA | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC | high_speed;
+	_display_dsi_wait(150000, _DSIREG(DSI_HOST_CONTROL), DSI_HOST_CONTROL_IMM_BTA);
+
+	// Wait a bit for the reply.
+	usleep(5000);
+
+	// Read RX FIFO.
+	_display_dsi_read_rx_fifo(fifo);
+
+	// Parse packet and copy over the data.
+	if ((fifo[0] & 0xFF) == DSI_ESCAPE_CMD)
+	{
+		// Act based on reply type.
+		switch (fifo[1] & 0xFF)
+		{
+		case GEN_LONG_RD_RES:
+		case DCS_LONG_RD_RES:
+			memcpy(data, &fifo[2], MIN((fifo[1] >> 8) & 0xFFFF, len));
+			break;
+
+		case GEN_1_BYTE_SHORT_RD_RES:
+		case DCS_1_BYTE_SHORT_RD_RES:
+			memcpy(data, &fifo[2], 1);
+			break;
+
+		case GEN_2_BYTE_SHORT_RD_RES:
+		case DCS_2_BYTE_SHORT_RD_RES:
+			memcpy(data, &fifo[2], 2);
+			break;
+		case ACK_ERROR_RES:
+		default:
+			res = 1;
+			break;
+		}
+	}
+
+	// Disable host cmd packets during video and restore host control.
+	if (video_enabled)
+	{
+		// Wait for vblank before reseting sync points.
+		DISPLAY_A(_DIREG(DC_CMD_INT_STATUS)) = DC_CMD_INT_FRAME_END_INT; // Clear interrupt.
+		while (DISPLAY_A(_DIREG(DC_CMD_INT_STATUS)) & DC_CMD_INT_FRAME_END_INT)
+			;
+
+		// Reset all states of syncpt block.
+		DSI(_DSIREG(DSI_INCR_SYNCPT_CNTRL)) = DSI_INCR_SYNCPT_SOFT_RESET;
+		usleep(300); // Stabilization delay.
+
+		// Clear syncpt block reset.
+		DSI(_DSIREG(DSI_INCR_SYNCPT_CNTRL)) = 0;
+		usleep(300); // Stabilization delay.
+
+		// Restore video mode and host control.
+		DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0;
+		DSI(_DSIREG(DSI_HOST_CONTROL)) = host_control;
+
+		// Disable and clear vblank interrupt.
+		DISPLAY_A(_DIREG(DC_CMD_INT_ENABLE)) = 0;
+		DISPLAY_A(_DIREG(DC_CMD_INT_STATUS)) = DC_CMD_INT_FRAME_END_INT;
+	}
+
+	return res;
+}
+
+void display_dsi_write(u8 cmd, u32 len, void *data, bool video_enabled)
+{
+	u8  *fifo8;
+	u32 *fifo32;
+	u32 host_control;
+
+	// Enable host cmd packets during video and save host control.
+	if (video_enabled)
+		DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = DSI_CMD_PKT_VID_ENABLE;
+	host_control = DSI(_DSIREG(DSI_HOST_CONTROL));
+
+	// Enable host transfer trigger.
+	DSI(_DSIREG(DSI_HOST_CONTROL)) |= DSI_HOST_CONTROL_TX_TRIG_HOST;
+
+	switch (len)
+	{
+	case 0:
+		_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, cmd, 0);
+		break;
+
+	case 1:
+		_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE_PARAM, cmd | (*(u8 *)data << 8), 0);
+		break;
+
+	default:
+		fifo32 = calloc(DSI_STATUS_RX_FIFO_SIZE * 8, 4);
+		fifo8 = (u8 *)fifo32;
+		fifo32[0] = (len << 8) | MIPI_DSI_DCS_LONG_WRITE;
+		fifo8[4] = cmd;
+		memcpy(&fifo8[5], data, len);
+		len += 4 + 1; // Increase length by CMD/length word and DCS CMD.
+		for (u32 i = 0; i < (ALIGN(len, 4) / 4); i++)
+			DSI(_DSIREG(DSI_WR_DATA)) = fifo32[i];
+		DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
+		free(fifo32);
+		break;
+	}
+
+	// Wait for the write to happen.
+	_display_dsi_wait(250000, _DSIREG(DSI_TRIGGER), DSI_TRIGGER_HOST);
+
+	// Disable host cmd packets during video and restore host control.
+	if (video_enabled)
+		DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0;
+	DSI(_DSIREG(DSI_HOST_CONTROL)) = host_control;
+}
+
+void display_init()
+{
+	// Check if display is already initialized.
+	if (CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & BIT(CLK_L_DISP1))
+		_display_panel_and_hw_end(true);
+
+	// Get Chip ID.
+	bool tegra_t210 = hw_get_chip_id() == GP_HIDREV_MAJOR_T210;
+
+	// T210B01: Power on SD2 regulator for supplying LDO0.
+	if (!tegra_t210)
+	{
+		// Set SD2 regulator voltage.
+		max7762x_regulator_set_voltage(REGULATOR_SD2, 1325000);
+
+		// Set slew rate and enable SD2 regulator.
+		i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD2_CFG, (1 << MAX77620_SD_SR_SHIFT) | MAX77620_SD_CFG1_FSRADE_SD_ENABLE);
+		max7762x_regulator_enable(REGULATOR_SD2, true);
+
+	}
+
+	// Enable power to display panel controller.
+	max7762x_regulator_set_voltage(REGULATOR_LDO0, 1200000);
+	max7762x_regulator_enable(REGULATOR_LDO0, true);
+
+	if (tegra_t210)
+		max77620_config_gpio(7, MAX77620_GPIO_OUTPUT_ENABLE); // T210: LD0 -> GPIO7 -> Display panel.
+
+	// Enable Display Interface specific clocks.
+	CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
+	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
+
+	CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
+	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
+
+	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = BIT(CLK_X_UART_FST_MIPI_CAL);
+	CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL) = 10; // Set PLLP_OUT3 and div 6 (17MHz).
+
+	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = BIT(CLK_W_DSIA_LP);
+	CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 10;           // Set PLLP_OUT and div 6 (68MHz).
+
+	// Bring every IO rail out of deep power down.
+	PMC(APBDEV_PMC_IO_DPD_REQ)  = PMC_IO_DPD_REQ_DPD_OFF;
+	PMC(APBDEV_PMC_IO_DPD2_REQ) = PMC_IO_DPD_REQ_DPD_OFF;
+
+	// Configure LCD pins.
+	PINMUX_AUX(PINMUX_AUX_NFC_EN)     &= ~PINMUX_TRISTATE; // PULL_DOWN
+	PINMUX_AUX(PINMUX_AUX_NFC_INT)    &= ~PINMUX_TRISTATE; // PULL_DOWN
+	PINMUX_AUX(PINMUX_AUX_LCD_RST)    &= ~PINMUX_TRISTATE; // PULL_DOWN
+
+	// Configure Backlight pins.
+	PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE; // PULL_DOWN | 1
+	PINMUX_AUX(PINMUX_AUX_LCD_BL_EN)  &= ~PINMUX_TRISTATE; // PULL_DOWN
+
+	// Set LCD +-5V pins mode and direction
+	gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO);
+	gpio_output_enable(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_OUTPUT_ENABLE);
+
+	// Enable LCD power.
+	gpio_write(GPIO_PORT_I, GPIO_PIN_0, GPIO_HIGH); // LCD +5V enable.
+	usleep(10000);
+	gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_HIGH); // LCD -5V enable.
+	usleep(10000);
+
+	// Configure Backlight PWM/EN and LCD RST pins (BL PWM, BL EN, LCD RST).
+	gpio_config(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_MODE_GPIO);
+	gpio_output_enable(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_OUTPUT_ENABLE);
+
+	 // Enable Backlight power.
+	gpio_write(GPIO_PORT_V, GPIO_PIN_1, GPIO_HIGH);
+
+	// Power up supply regulator for display interface.
+	MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG2)) = 0;
+
+	if (!tegra_t210)
+	{
+		MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG0)) = 0;
+		APB_MISC(APB_MISC_GP_DSI_PAD_CONTROL) = 0;
+	}
+
+	// Set DISP1 clock source and parent clock.
+	CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DISP1) = 0x40000000; // PLLD_OUT.
+	u32 plld_div = (3 << 20) | (20 << 11) | 1; // DIVM: 1, DIVN: 20, DIVP: 3. PLLD_OUT: 768 MHz, PLLD_OUT0 (DSI): 97.5 MHz (offset).
+	CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) = PLLCX_BASE_ENABLE | PLLCX_BASE_LOCK | plld_div;
+
+	if (tegra_t210)
+	{
+		CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0x20;     // PLLD_SETUP.
+		CLOCK(CLK_RST_CONTROLLER_PLLD_MISC)  = 0x2D0AAA; // PLLD_ENABLE_CLK.
+	}
+	else
+	{
+		CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0;
+		CLOCK(CLK_RST_CONTROLLER_PLLD_MISC)  = 0x2DFC00; // PLLD_ENABLE_CLK.
+	}
+
+	// Setup Display Interface initial window configuration.
+	exec_cfg((u32 *)DISPLAY_A_BASE, _display_dc_setup_win_config, 94);
+
+	// Setup display communication interfaces.
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part1, 8);
+	if (tegra_t210)
+		DSI(_DSIREG(DSI_INIT_SEQ_DATA_15)) = 0;
+	else
+		DSI(_DSIREG(DSI_INIT_SEQ_DATA_15_B01)) = 0;
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part2, 14);
+	if (!tegra_t210)
+		exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part3_t210b01, 7);
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part4, 10);
+	DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603;
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part5, 12);
+	DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603;
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part6, 14);
+	usleep(10000);
+
+	// Enable LCD Reset.
+	gpio_write(GPIO_PORT_V, GPIO_PIN_2, GPIO_HIGH);
+	usleep(60000);
+
+	// Setup DSI device takeover timeout.
+	DSI(_DSIREG(DSI_BTA_TIMING)) = 0x50204;
+
+#if 0
+	// Get Display ID.
+	_display_id = 0xCCCCCC; // Set initial value. 4th byte cleared.
+	display_dsi_read(MIPI_DCS_GET_DISPLAY_ID, 3, &_display_id, DSI_VIDEO_DISABLED);
+#else
+	// Drain RX FIFO.
+	_display_dsi_read_rx_fifo(NULL);
+
+	// Set reply size.
+	_display_dsi_send_cmd(MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, 3, 0);
+	_display_dsi_wait(250000, _DSIREG(DSI_TRIGGER), DSI_TRIGGER_HOST | DSI_TRIGGER_VIDEO);
+
+	// Request register read.
+	_display_dsi_send_cmd(MIPI_DSI_DCS_READ, MIPI_DCS_GET_DISPLAY_ID, 0);
+	_display_dsi_wait(250000, _DSIREG(DSI_TRIGGER), DSI_TRIGGER_HOST | DSI_TRIGGER_VIDEO);
+
+	// Transfer bus control to device for transmitting the reply.
+	DSI(_DSIREG(DSI_HOST_CONTROL)) = DSI_HOST_CONTROL_TX_TRIG_HOST | DSI_HOST_CONTROL_IMM_BTA | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC;
+	_display_dsi_wait(150000, _DSIREG(DSI_HOST_CONTROL), DSI_HOST_CONTROL_IMM_BTA);
+
+	// Wait a bit for the reply.
+	usleep(5000);
+
+	// MIPI_DCS_GET_DISPLAY_ID reply is a long read, size 3 x u32.
+	for (u32 i = 0; i < 3; i++)
+		_display_id = DSI(_DSIREG(DSI_RD_DATA)) & 0xFFFFFF; // Skip ack and msg type info and get the payload (display id).
+#endif
+	// Save raw Display ID to Nyx storage.
+	nyx_str->info.disp_id = _display_id;
+
+	// Decode Display ID.
+	_display_id = ((_display_id >> 8) & 0xFF00) | (_display_id & 0xFF);
+
+	if ((_display_id & 0xFF) == PANEL_JDI_XXX062M)
+		_display_id = PANEL_JDI_XXX062M;
+
+	// Initialize display panel.
+	switch (_display_id)
+	{
+	case PANEL_JDI_XXX062M:
+		exec_cfg((u32 *)DSI_BASE, _display_init_config_jdi, 43);
+		_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, MIPI_DCS_EXIT_SLEEP_MODE, 180000);
+		break;
+
+	case PANEL_INL_P062CCA_AZ1:
+	case PANEL_AUO_A062TAN01:
+		_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, MIPI_DCS_EXIT_SLEEP_MODE, 180000);
+
+		// Unlock extension cmds.
+		DSI(_DSIREG(DSI_WR_DATA)) = 0x439;          // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
+		DSI(_DSIREG(DSI_WR_DATA)) = 0x9483FFB9;     // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
+		DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
+		usleep(5000);
+
+		// Set Power control.
+		DSI(_DSIREG(DSI_WR_DATA)) = 0x739;          // MIPI_DSI_DCS_LONG_WRITE: 7 bytes.
+		if (_display_id == PANEL_INL_P062CCA_AZ1)
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x751548B1; // MIPI_DCS_PRIV_SET_POWER_CONTROL. (Not deep standby, BT5 / XDK, VRH gamma volt adj 53 / x40).
+		else // PANEL_AUO_A062TAN01.
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x711148B1; // MIPI_DCS_PRIV_SET_POWER_CONTROL. (Not deep standby, BT1 / XDK, VRH gamma volt adj 49 / x40).
+		DSI(_DSIREG(DSI_WR_DATA)) = 0x143209;       // (NVRH gamma volt adj 9, Amplifier current small / x30, FS0 freq Fosc/80 / FS1 freq Fosc/32).
+		DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
+		usleep(5000);
+		break;
+
+	case PANEL_INL_2J055IA_27A:
+	case PANEL_AUO_A055TAN01:
+	case PANEL_V40_55_UNK:
+	default: // Allow spare part displays to work.
+		_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, MIPI_DCS_EXIT_SLEEP_MODE, 120000);
+		break;
+	}
+
+	// Unblank display.
+	_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, MIPI_DCS_SET_DISPLAY_ON, 20000);
+
+	// Configure PLLD for DISP1.
+	plld_div = (1 << 20) | (24 << 11) | 1; // DIVM: 1, DIVN: 24, DIVP: 1. PLLD_OUT: 768 MHz, PLLD_OUT0 (DSI): 234 MHz (offset).
+	CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) = PLLCX_BASE_ENABLE | PLLCX_BASE_LOCK | plld_div;
+
+	if (tegra_t210)
+		CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0x20; // PLLD_SETUP.
+	else
+		CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0;
+	CLOCK(CLK_RST_CONTROLLER_PLLD_MISC) = 0x2DFC00;  // Use new PLLD_SDM_DIN.
+
+	// Finalize DSI configuration.
+	DSI(_DSIREG(DSI_PAD_CONTROL_1)) = 0;
+	DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603;
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_packet_config, 19);
+	// Set pixel clock dividers: 234 / 3 / 1 = 78 MHz (offset) for 60 Hz.
+	DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = PIXEL_CLK_DIVIDER_PCD1 | SHIFT_CLK_DIVIDER(4); // 4: div3.
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_mode_config, 10);
+	usleep(10000);
+
+	// Calibrate display communication pads.
+	u32 loops = tegra_t210 ? 1 : 2; // Find out why this is done 2 times on Mariko.
+	exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_pad_cal_config, 4);
+	for (u32 i = 0; i < loops; i++)
+	{
+		// Set MIPI bias pad config.
+		MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG2)) = 0x10010;
+		MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG1)) = tegra_t210 ? 0x300 : 0;
+
+		// Set pad trimmers and set MIPI DSI cal offsets.
+		if (tegra_t210)
+		{
+			exec_cfg((u32 *)DSI_BASE, _display_dsi_pad_cal_config_t210, 4);
+			exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_dsi_cal_offsets_config_t210, 4);
+		}
+		else
+		{
+			exec_cfg((u32 *)DSI_BASE, _display_dsi_pad_cal_config_t210b01, 7);
+			exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_dsi_cal_offsets_config_t210b01, 4);
+		}
+
+		// Set the rest of MIPI cal offsets and apply calibration.
+		exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_apply_dsi_cal_config, 12);
+	}
+	usleep(10000);
+
+	// Enable video display controller.
+	exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_enable_config, 113);
+}
+
+void display_backlight_pwm_init()
+{
+	clock_enable_pwm();
+
+	PWM(PWM_CONTROLLER_PWM_CSR_0) = PWM_CSR_EN; // Enable PWM and set it to 25KHz PFM. 29.5KHz is stock.
+
+	PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_FUNC_MASK) | 1; // Set PWM0 mode.
+	gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight power mode.
+}
+
+void display_backlight(bool enable)
+{
+	gpio_write(GPIO_PORT_V, GPIO_PIN_0, enable ? GPIO_HIGH : GPIO_LOW); // Backlight PWM GPIO.
+}
+
+void display_backlight_brightness(u32 brightness, u32 step_delay)
+{
+	u32 old_value = (PWM(PWM_CONTROLLER_PWM_CSR_0) >> 16) & 0xFF;
+	if (brightness == old_value)
+		return;
+
+	if (brightness > 255)
+		brightness = 255;
+
+	if (old_value < brightness)
+	{
+		for (u32 i = old_value; i < brightness + 1; i++)
+		{
+			PWM(PWM_CONTROLLER_PWM_CSR_0) = PWM_CSR_EN | (i << 16); // Enable PWM and set it to 25KHz PFM.
+			usleep(step_delay);
+		}
+	}
+	else
+	{
+		for (u32 i = old_value; i > brightness; i--)
+		{
+			PWM(PWM_CONTROLLER_PWM_CSR_0) = PWM_CSR_EN | (i << 16); // Enable PWM and set it to 25KHz PFM.
+			usleep(step_delay);
+		}
+	}
+	if (!brightness)
+		PWM(PWM_CONTROLLER_PWM_CSR_0) = 0;
+}
+
+static void _display_panel_and_hw_end(bool no_panel_deinit)
+{
+	if (no_panel_deinit)
+		goto skip_panel_deinit;
+
+	display_backlight_brightness(0, 1000);
+
+	// Enable host cmd packets during video.
+	DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = DSI_CMD_PKT_VID_ENABLE;
+
+	// Blank display.
+	DSI(_DSIREG(DSI_WR_DATA)) = (MIPI_DCS_SET_DISPLAY_OFF << 8) | MIPI_DSI_DCS_SHORT_WRITE;
+
+	// Propagate changes to all register buffers and disable host cmd packets during video.
+	DISPLAY_A(_DIREG(DC_CMD_STATE_ACCESS)) = READ_MUX | WRITE_MUX;
+	DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0;
+
+	// De-initialize video controller.
+	exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_disable_config, 17);
+	exec_cfg((u32 *)DSI_BASE, _display_dsi_timing_deinit_config, 16);
+	usleep(10000);
+
+	// De-initialize display panel.
+	switch (_display_id)
+	{
+	case PANEL_JDI_XXX062M:
+		exec_cfg((u32 *)DSI_BASE, _display_deinit_config_jdi, 22);
+		break;
+
+	case PANEL_AUO_A062TAN01:
+		exec_cfg((u32 *)DSI_BASE, _display_deinit_config_auo, 37);
+		break;
+
+	case PANEL_INL_2J055IA_27A:
+	case PANEL_AUO_A055TAN01:
+	case PANEL_V40_55_UNK:
+		// Unlock extension cmds.
+		DSI(_DSIREG(DSI_WR_DATA)) = 0x439;          // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
+		DSI(_DSIREG(DSI_WR_DATA)) = 0x9483FFB9;     // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
+		DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
+		usleep(5000);
+
+		// Set Power control.
+		DSI(_DSIREG(DSI_WR_DATA)) = 0xB39;          // MIPI_DSI_DCS_LONG_WRITE: 11 bytes.
+		if (_display_id == PANEL_INL_2J055IA_27A)
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x751548B1; // MIPI_DCS_PRIV_SET_POWER_CONTROL. (Not deep standby, BT5 / XDK, VRH gamma volt adj 53 / x40).
+		else if (_display_id == PANEL_AUO_A055TAN01)
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x711148B1; // MIPI_DCS_PRIV_SET_POWER_CONTROL. (Not deep standby, BT1 / XDK, VRH gamma volt adj 49 / x40).
+		else // PANEL_V40_55_UNK.
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x731348B1; // MIPI_DCS_PRIV_SET_POWER_CONTROL. (Not deep standby, BT3 / XDK, VRH gamma volt adj 51 / x40).
+		if (_display_id == PANEL_INL_2J055IA_27A || _display_id == PANEL_AUO_A055TAN01)
+		{
+			// (NVRH gamma volt adj 9, Amplifier current small / x30, FS0 freq Fosc/80 / FS1 freq Fosc/32, Enter standby / PON / VCOMG).
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x71143209;
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x114D31;   // (Unknown).
+		}
+		else // PANEL_V40_55_UNK.
+		{
+			// (NVRH gamma volt adj 9, Amplifier current small / x30, FS0 freq Fosc/80 / FS1 freq Fosc/48, Enter standby / PON / VCOMG).
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x71243209;
+			DSI(_DSIREG(DSI_WR_DATA)) = 0x004C31;   // (Unknown).
+		}
+		DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
+		usleep(5000);
+		break;
+
+	case PANEL_INL_P062CCA_AZ1:
+	default:
+		break;
+	}
+
+	// Blank - powerdown.
+	_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, MIPI_DCS_ENTER_SLEEP_MODE, 50000);
+
+skip_panel_deinit:
+	// Disable LCD power pins.
+	gpio_write(GPIO_PORT_V, GPIO_PIN_2, GPIO_LOW); // LCD Reset disable.
+	usleep(10000);
+	gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_LOW); // LCD -5V disable.
+	usleep(10000);
+	gpio_write(GPIO_PORT_I, GPIO_PIN_0, GPIO_LOW); // LCD +5V disable.
+	usleep(10000);
+
+	// Disable Display Interface specific clocks.
+	CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
+	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
+	CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
+	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
+
+	// Power down pads.
+	DSI(_DSIREG(DSI_PAD_CONTROL_0)) = DSI_PAD_CONTROL_VS1_PULLDN_CLK | DSI_PAD_CONTROL_VS1_PULLDN(0xF) | DSI_PAD_CONTROL_VS1_PDIO_CLK | DSI_PAD_CONTROL_VS1_PDIO(0xF);
+	DSI(_DSIREG(DSI_POWER_CONTROL)) = 0;
+
+	// Switch LCD PWM backlight pin to special function mode and enable PWM0 mode.
+	gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight PWM.
+	PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_TRISTATE) | PINMUX_TRISTATE;
+	PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_FUNC_MASK) | 1; // Set PWM0 mode.
+}
+
+void display_end() { _display_panel_and_hw_end(false); };
+
+u16 display_get_decoded_panel_id()
+{
+	return _display_id;
+}
+
+void display_set_decoded_panel_id(u32 id)
+{
+	// Decode Display ID.
+	_display_id = ((id >> 8) & 0xFF00) | (id & 0xFF);
+
+	if ((_display_id & 0xFF) == PANEL_JDI_XXX062M)
+		_display_id = PANEL_JDI_XXX062M;
+}
+
+void display_color_screen(u32 color)
+{
+	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_one_color, 8);
+
+	// Configure display to show single color.
+	DISPLAY_A(_DIREG(DC_WIN_AD_WIN_OPTIONS)) = 0;
+	DISPLAY_A(_DIREG(DC_WIN_BD_WIN_OPTIONS)) = 0;
+	DISPLAY_A(_DIREG(DC_WIN_CD_WIN_OPTIONS)) = 0;
+	DISPLAY_A(_DIREG(DC_DISP_BLEND_BACKGROUND_COLOR)) = color;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = (DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) & 0xFFFFFFFE) | GENERAL_ACT_REQ;
+	usleep(35000);
+
+	display_backlight(true);
+}
+
+u32 *display_init_framebuffer_pitch()
+{
+	// Sanitize framebuffer area.
+	memset((u32 *)IPL_FB_ADDRESS, 0, 0x3C0000);
+
+	// This configures the framebuffer @ IPL_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
+	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch, 32);
+	usleep(35000);
+
+	return (u32 *)IPL_FB_ADDRESS;
+}
+
+u32 *display_init_framebuffer_pitch_inv()
+{
+	// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
+	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch_inv, 34);
+
+	usleep(35000);
+
+	return (u32 *)NYX_FB_ADDRESS;
+}
+
+u32 *display_init_framebuffer_block()
+{
+	// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
+	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_block, 34);
+
+	usleep(35000);
+
+	return (u32 *)NYX_FB_ADDRESS;
+}
+
+u32 *display_init_framebuffer_log()
+{
+	// This configures the framebuffer @ LOG_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
+	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_log, 20);
+
+	return (u32 *)LOG_FB_ADDRESS;
+}
+
+void display_activate_console()
+{
+	DISPLAY_A(_DIREG(DC_CMD_DISPLAY_WINDOW_HEADER)) = WINDOW_D_SELECT; // Select window D.
+	DISPLAY_A(_DIREG(DC_WIN_WIN_OPTIONS)) = WIN_ENABLE; // Enable window DD.
+	DISPLAY_A(_DIREG(DC_WIN_POSITION)) = 0xFF80;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | WIN_D_UPDATE;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | WIN_D_ACT_REQ;
+
+	for (u32 i = 0xFF80; i < 0x10000; i++)
+	{
+		DISPLAY_A(_DIREG(DC_WIN_POSITION)) = i & 0xFFFF;
+		DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | WIN_D_UPDATE;
+		DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | WIN_D_ACT_REQ;
+		usleep(1000);
+	}
+
+	DISPLAY_A(_DIREG(DC_WIN_POSITION)) = 0;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | WIN_D_UPDATE;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | WIN_D_ACT_REQ;
+}
+
+void display_deactivate_console()
+{
+	DISPLAY_A(_DIREG(DC_CMD_DISPLAY_WINDOW_HEADER)) = WINDOW_D_SELECT; // Select window D.
+
+	for (u32 i = 0xFFFF; i > 0xFF7F; i--)
+	{
+		DISPLAY_A(_DIREG(DC_WIN_POSITION)) = i & 0xFFFF;
+		DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | WIN_D_UPDATE;
+		DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | WIN_D_ACT_REQ;
+		usleep(500);
+	}
+
+	DISPLAY_A(_DIREG(DC_WIN_POSITION)) = 0;
+	DISPLAY_A(_DIREG(DC_WIN_WIN_OPTIONS)) = 0; // Disable window DD.
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | WIN_D_UPDATE;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | WIN_D_ACT_REQ;
+}
+
+void display_init_cursor(void *crs_fb, u32 size)
+{
+	// Setup cursor.
+	DISPLAY_A(_DIREG(DC_DISP_CURSOR_START_ADDR)) = CURSOR_CLIPPING(CURSOR_CLIP_WIN_A) | size | ((u32)crs_fb >> 10);
+	DISPLAY_A(_DIREG(DC_DISP_BLEND_CURSOR_CONTROL)) =
+		CURSOR_BLEND_R8G8B8A8 | CURSOR_BLEND_DST_FACTOR(CURSOR_BLEND_K1) | CURSOR_BLEND_SRC_FACTOR(CURSOR_BLEND_K1) | 0xFF;
+
+	DISPLAY_A(_DIREG(DC_DISP_DISP_WIN_OPTIONS)) |= CURSOR_ENABLE;
+
+	// Arm and activate changes.
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | CURSOR_UPDATE;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | CURSOR_ACT_REQ;
+}
+
+void display_set_pos_cursor(u32 x, u32 y)
+{
+	DISPLAY_A(_DIREG(DC_DISP_CURSOR_POSITION)) = x | (y << 16);
+
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | CURSOR_UPDATE;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | CURSOR_ACT_REQ;
+}
+
+void display_deinit_cursor()
+{
+	DISPLAY_A(_DIREG(DC_DISP_BLEND_CURSOR_CONTROL)) = 0;
+	DISPLAY_A(_DIREG(DC_DISP_DISP_WIN_OPTIONS)) &= ~CURSOR_ENABLE;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_UPDATE | CURSOR_UPDATE;
+	DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = GENERAL_ACT_REQ | CURSOR_ACT_REQ;
+}

bdk/display/di.h

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018-2019 CTCaer
+ * Copyright (c) 2018-2020 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -18,8 +18,11 @@
 #ifndef _DI_H_
 #define _DI_H_
 
-#include "../../../common/memory_map.h"
-#include "../utils/types.h"
+#include <memory_map.h>
+#include <utils/types.h>
+
+#define DSI_VIDEO_DISABLED 0
+#define DSI_VIDEO_ENABLED  1
 
 /*! Display registers. */
 #define _DIREG(reg) ((reg) * 4)
@@ -42,11 +45,11 @@
 #define DC_CMD_GENERAL_INCR_SYNCPT 0x00
 
 #define DC_CMD_GENERAL_INCR_SYNCPT_CNTRL 0x01
-#define  SYNCPT_CNTRL_NO_STALL   (1 << 8)
-#define  SYNCPT_CNTRL_SOFT_RESET (1 << 0)
+#define  SYNCPT_CNTRL_SOFT_RESET BIT(0)
+#define  SYNCPT_CNTRL_NO_STALL   BIT(8)
 
 #define DC_CMD_CONT_SYNCPT_VSYNC 0x28
-#define  SYNCPT_VSYNC_ENABLE (1 << 8)
+#define  SYNCPT_VSYNC_ENABLE BIT(8)
 
 #define DC_CMD_DISPLAY_COMMAND_OPTION0 0x031
 
@@ -57,42 +60,43 @@
 #define  DISP_CTRL_MODE_MASK       (3 << 5)
 
 #define DC_CMD_DISPLAY_POWER_CONTROL 0x36
-#define  PW0_ENABLE (1 <<  0)
-#define  PW1_ENABLE (1 <<  2)
-#define  PW2_ENABLE (1 <<  4)
-#define  PW3_ENABLE (1 <<  6)
-#define  PW4_ENABLE (1 <<  8)
-#define  PM0_ENABLE (1 << 16)
-#define  PM1_ENABLE (1 << 18)
+#define  PW0_ENABLE BIT(0)
+#define  PW1_ENABLE BIT(2)
+#define  PW2_ENABLE BIT(4)
+#define  PW3_ENABLE BIT(6)
+#define  PW4_ENABLE BIT(8)
+#define  PM0_ENABLE BIT(16)
+#define  PM1_ENABLE BIT(18)
 
 #define DC_CMD_INT_STATUS 0x37
 #define DC_CMD_INT_MASK 0x38
 #define DC_CMD_INT_ENABLE 0x39
+#define  DC_CMD_INT_FRAME_END_INT BIT(1)
 
 #define DC_CMD_STATE_ACCESS 0x40
-#define  READ_MUX  (1 << 0)
-#define  WRITE_MUX (1 << 2)
+#define  READ_MUX  BIT(0)
+#define  WRITE_MUX BIT(2)
 
 #define DC_CMD_STATE_CONTROL 0x41
-#define  GENERAL_ACT_REQ (1 <<  0)
-#define  WIN_A_ACT_REQ   (1 <<  1)
-#define  WIN_B_ACT_REQ   (1 <<  2)
-#define  WIN_C_ACT_REQ   (1 <<  3)
-#define  WIN_D_ACT_REQ   (1 <<  4)
-#define  CURSOR_ACT_REQ  (1 <<  7)
-#define  GENERAL_UPDATE  (1 <<  8)
-#define  WIN_A_UPDATE    (1 <<  9)
-#define  WIN_B_UPDATE    (1 << 10)
-#define  WIN_C_UPDATE    (1 << 11)
-#define  WIN_D_UPDATE    (1 << 12)
-#define  CURSOR_UPDATE   (1 << 15)
-#define  NC_HOST_TRIG    (1 << 24)
+#define  GENERAL_ACT_REQ BIT(0)
+#define  WIN_A_ACT_REQ   BIT(1)
+#define  WIN_B_ACT_REQ   BIT(2)
+#define  WIN_C_ACT_REQ   BIT(3)
+#define  WIN_D_ACT_REQ   BIT(4)
+#define  CURSOR_ACT_REQ  BIT(7)
+#define  GENERAL_UPDATE  BIT(8)
+#define  WIN_A_UPDATE    BIT(9)
+#define  WIN_B_UPDATE    BIT(10)
+#define  WIN_C_UPDATE    BIT(11)
+#define  WIN_D_UPDATE    BIT(12)
+#define  CURSOR_UPDATE   BIT(15)
+#define  NC_HOST_TRIG    BIT(24)
 
 #define DC_CMD_DISPLAY_WINDOW_HEADER 0x42
-#define  WINDOW_A_SELECT (1 << 4)
-#define  WINDOW_B_SELECT (1 << 5)
-#define  WINDOW_C_SELECT (1 << 6)
-#define  WINDOW_D_SELECT (1 << 7)
+#define  WINDOW_A_SELECT BIT(4)
+#define  WINDOW_B_SELECT BIT(5)
+#define  WINDOW_C_SELECT BIT(6)
+#define  WINDOW_D_SELECT BIT(7)
 
 #define DC_CMD_REG_ACT_CONTROL 0x043
 
@@ -125,12 +129,13 @@
 
 // DC_DISP shadowed registers.
 #define DC_DISP_DISP_WIN_OPTIONS 0x402
-#define  HDMI_ENABLE     (1 << 30)
-#define  DSI_ENABLE      (1 << 29)
-#define  SOR1_TIMING_CYA (1 << 27)
-#define  SOR1_ENABLE     (1 << 26)
-#define  SOR_ENABLE      (1 << 25)
-#define  CURSOR_ENABLE   (1 << 16)
+#define  CURSOR_ENABLE   BIT(16)
+#define  SOR_ENABLE      BIT(25)
+#define  SOR1_ENABLE     BIT(26)
+#define  SOR1_TIMING_CYA BIT(27)
+#define  DSI_ENABLE      BIT(29)
+#define  HDMI_ENABLE     BIT(30)
+
 
 #define DC_DISP_DISP_MEM_HIGH_PRIORITY 0x403
 #define DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER 0x404
@@ -142,6 +147,7 @@
 #define DC_DISP_FRONT_PORCH 0x40A
 
 #define DC_DISP_DISP_CLOCK_CONTROL 0x42E
+#define  SHIFT_CLK_DIVIDER(x)    ((x) & 0xff)
 #define  PIXEL_CLK_DIVIDER_PCD1  (0 << 8)
 #define  PIXEL_CLK_DIVIDER_PCD1H (1 << 8)
 #define  PIXEL_CLK_DIVIDER_PCD2  (2 << 8)
@@ -155,7 +161,6 @@
 #define  PIXEL_CLK_DIVIDER_PCD18 (10 << 8)
 #define  PIXEL_CLK_DIVIDER_PCD24 (11 << 8)
 #define  PIXEL_CLK_DIVIDER_PCD13 (12 << 8)
-#define  SHIFT_CLK_DIVIDER(x)    ((x) & 0xff)
 
 #define DC_DISP_DISP_INTERFACE_CONTROL 0x42F
 #define  DISP_DATA_FORMAT_DF1P1C    (0 << 0)
@@ -189,8 +194,8 @@
 #define  BASE_COLOR_SIZE_888    (8 << 0)
 
 #define DC_DISP_SHIFT_CLOCK_OPTIONS 0x431
-#define  SC1_H_QUALIFIER_NONE	(1 << 16)
-#define  SC0_H_QUALIFIER_NONE	(1 <<  0)
+#define  SC0_H_QUALIFIER_NONE	BIT(0)
+#define  SC1_H_QUALIFIER_NONE	BIT(16)
 
 #define DC_DISP_DATA_ENABLE_OPTIONS 0x432
 #define  DE_SELECT_ACTIVE_BLANK  (0 << 0)
@@ -217,6 +222,7 @@
 #define  CURSOR_SIZE_128 (2 << 24)
 #define  CURSOR_SIZE_256 (3 << 24)
 #define DC_DISP_CURSOR_POSITION      0x440
+#define DC_DISP_BLEND_BACKGROUND_COLOR 0x4E4
 #define DC_DISP_CURSOR_START_ADDR_HI 0x4EC
 #define DC_DISP_BLEND_CURSOR_CONTROL 0x4F1
 #define  CURSOR_BLEND_2BIT     (0 << 24)
@@ -247,12 +253,12 @@
 
 // The following registers are A/B/C shadows of the 0xB80/0xD80/0xF80 registers (see DISPLAY_WINDOW_HEADER).
 #define DC_WIN_WIN_OPTIONS 0x700
-#define  H_DIRECTION  (1 <<  0)
-#define  V_DIRECTION  (1 <<  2)
-#define  SCAN_COLUMN  (1 <<  4)
-#define  COLOR_EXPAND (1 <<  6)
-#define  CSC_ENABLE   (1 << 18)
-#define  WIN_ENABLE   (1 << 30)
+#define  H_DIRECTION  BIT(0)
+#define  V_DIRECTION  BIT(2)
+#define  SCAN_COLUMN  BIT(4)
+#define  COLOR_EXPAND BIT(6)
+#define  CSC_ENABLE   BIT(18)
+#define  WIN_ENABLE   BIT(30)
 
 #define DC_WIN_BUFFER_CONTROL 0x702
 #define  BUFFER_CONTROL_HOST  0
@@ -358,6 +364,10 @@
 /*! Display serial interface registers. */
 #define _DSIREG(reg) ((reg) * 4)
 
+#define DSI_INCR_SYNCPT_CNTRL 0x1
+#define  DSI_INCR_SYNCPT_SOFT_RESET BIT(0)
+#define  DSI_INCR_SYNCPT_NO_STALL   BIT(8)
+
 #define DSI_RD_DATA 0x9
 #define DSI_WR_DATA 0xA
 
@@ -369,39 +379,42 @@
 #define DSI_INT_MASK 0xE
 
 #define DSI_HOST_CONTROL 0xF
-#define  DSI_HOST_CONTROL_FIFO_RESET   (1 << 21)
-#define  DSI_HOST_CONTROL_CRC_RESET    (1 << 20)
+#define  DSI_HOST_CONTROL_ECC          BIT(0)
+#define  DSI_HOST_CONTROL_CS           BIT(1)
+#define  DSI_HOST_CONTROL_PKT_BTA      BIT(2)
+#define  DSI_HOST_CONTROL_IMM_BTA      BIT(3)
+#define  DSI_HOST_CONTROL_FIFO_SEL     BIT(4)
+#define  DSI_HOST_CONTROL_HS           BIT(5)
+#define  DSI_HOST_CONTROL_RAW          BIT(6)
 #define  DSI_HOST_CONTROL_TX_TRIG_SOL  (0 << 12)
 #define  DSI_HOST_CONTROL_TX_TRIG_FIFO (1 << 12)
 #define  DSI_HOST_CONTROL_TX_TRIG_HOST (2 << 12)
-#define  DSI_HOST_CONTROL_RAW          (1 << 6)
-#define  DSI_HOST_CONTROL_HS           (1 << 5)
-#define  DSI_HOST_CONTROL_FIFO_SEL     (1 << 4)
-#define  DSI_HOST_CONTROL_IMM_BTA      (1 << 3)
-#define  DSI_HOST_CONTROL_PKT_BTA      (1 << 2)
-#define  DSI_HOST_CONTROL_CS           (1 << 1)
-#define  DSI_HOST_CONTROL_ECC          (1 << 0)
+#define  DSI_HOST_CONTROL_CRC_RESET    BIT(20)
+#define  DSI_HOST_CONTROL_FIFO_RESET   BIT(21)
 
 #define DSI_CONTROL 0x10
-#define  DSI_CONTROL_HS_CLK_CTRL  (1 << 20)
-#define  DSI_CONTROL_CHANNEL(c)   (((c) & 0x3) << 16)
-#define  DSI_CONTROL_FORMAT(f)    (((f) & 0x3) << 12)
-#define  DSI_CONTROL_TX_TRIG(x)   (((x) & 0x3) <<  8)
-#define  DSI_CONTROL_LANES(n)     (((n) & 0x3) <<  4)
-#define  DSI_CONTROL_DCS_ENABLE   (1 << 3)
+#define  DSI_CONTROL_HOST_ENABLE  BIT(0)
+#define  DSI_CONTROL_VIDEO_ENABLE BIT(1)
 #define  DSI_CONTROL_SOURCE(s)    (((s) & 0x1) <<  2)
-#define  DSI_CONTROL_VIDEO_ENABLE (1 << 1)
-#define  DSI_CONTROL_HOST_ENABLE  (1 << 0)
+#define  DSI_CONTROL_DCS_ENABLE   BIT(3)
+#define  DSI_CONTROL_LANES(n)     (((n) & 0x3) <<  4)
+#define  DSI_CONTROL_TX_TRIG(x)   (((x) & 0x3) <<  8)
+#define  DSI_CONTROL_FORMAT(f)    (((f) & 0x3) << 12)
+#define  DSI_CONTROL_CHANNEL(c)   (((c) & 0x3) << 16)
+#define  DSI_CONTROL_HS_CLK_CTRL  BIT(20)
 
 #define DSI_SOL_DELAY 0x11
 #define DSI_MAX_THRESHOLD 0x12
 
 #define DSI_TRIGGER 0x13
-#define  DSI_TRIGGER_HOST  (1 << 1)
-#define  DSI_TRIGGER_VIDEO (1 << 0)
+#define  DSI_TRIGGER_VIDEO BIT(0)
+#define  DSI_TRIGGER_HOST  BIT(1)
 
 #define DSI_TX_CRC 0x14
+
 #define DSI_STATUS 0x15
+#define  DSI_STATUS_RX_FIFO_SIZE 0x1F
+
 #define DSI_INIT_SEQ_CONTROL 0x1A
 #define DSI_INIT_SEQ_DATA_0 0x1B
 #define DSI_INIT_SEQ_DATA_1 0x1C
@@ -430,36 +443,53 @@
 #define DSI_BTA_TIMING 0x3F
 
 #define DSI_TIMEOUT_0 0x44
-#define  DSI_TIMEOUT_LRX(x) (((x) & 0xffff) << 16)
 #define  DSI_TIMEOUT_HTX(x) (((x) & 0xffff) <<  0)
+#define  DSI_TIMEOUT_LRX(x) (((x) & 0xffff) << 16)
 
 #define DSI_TIMEOUT_1 0x45
-#define  DSI_TIMEOUT_PR(x) (((x) & 0xffff) << 16)
 #define  DSI_TIMEOUT_TA(x) (((x) & 0xffff) <<  0)
+#define  DSI_TIMEOUT_PR(x) (((x) & 0xffff) << 16)
 
 #define DSI_TO_TALLY 0x46
 
 #define DSI_PAD_CONTROL_0 0x4B
-#define  DSI_PAD_CONTROL_VS1_PULLDN_CLK (1 << 24)
-#define  DSI_PAD_CONTROL_VS1_PULLDN(x)  (((x) & 0xf) << 16)
-#define  DSI_PAD_CONTROL_VS1_PDIO_CLK   (1 <<  8)
+#define  DSI_PAD_CONTROL_VS1_PDIO_CLK   BIT(8)
 #define  DSI_PAD_CONTROL_VS1_PDIO(x)    (((x) & 0xf) <<  0)
+#define  DSI_PAD_CONTROL_VS1_PULLDN_CLK BIT(24)
+#define  DSI_PAD_CONTROL_VS1_PULLDN(x)  (((x) & 0xf) << 16)
 
 #define DSI_PAD_CONTROL_CD 0x4C
 #define DSI_VIDEO_MODE_CONTROL 0x4E
 #define  DSI_CMD_PKT_VID_ENABLE 1
+#define  DSI_DSI_LINE_TYPE(x) ((x) << 1)
 
 #define DSI_PAD_CONTROL_1 0x4F
 #define DSI_PAD_CONTROL_2 0x50
 
 #define DSI_PAD_CONTROL_3 0x51
-#define  DSI_PAD_PREEMP_PD_CLK(x) (((x) & 0x3) << 12)
-#define  DSI_PAD_PREEMP_PU_CLK(x) (((x) & 0x3) << 8)
-#define  DSI_PAD_PREEMP_PD(x)     (((x) & 0x3) << 4)
 #define  DSI_PAD_PREEMP_PU(x)     (((x) & 0x3) << 0)
+#define  DSI_PAD_PREEMP_PD(x)     (((x) & 0x3) << 4)
+#define  DSI_PAD_PREEMP_PU_CLK(x) (((x) & 0x3) << 8)
+#define  DSI_PAD_PREEMP_PD_CLK(x) (((x) & 0x3) << 12)
 
 #define DSI_PAD_CONTROL_4 0x52
+#define DSI_PAD_CONTROL_5_B01 0x53
+#define DSI_PAD_CONTROL_6_B01 0x54
+#define DSI_PAD_CONTROL_7_B01 0x55
 #define DSI_INIT_SEQ_DATA_15 0x5F
+#define DSI_INIT_SEQ_DATA_15_B01 0x62
+
+/*! DSI packet defines */
+#define DSI_ESCAPE_CMD	0x87
+#define DSI_ACK_NO_ERR	0x84
+
+#define ACK_ERROR_RES   0x02
+#define GEN_LONG_RD_RES 0x1A
+#define DCS_LONG_RD_RES 0x1C
+#define GEN_1_BYTE_SHORT_RD_RES 0x11
+#define DCS_1_BYTE_SHORT_RD_RES 0x21
+#define GEN_2_BYTE_SHORT_RD_RES 0x12
+#define DCS_2_BYTE_SHORT_RD_RES 0x22
 
 /*! MIPI registers. */
 #define MIPI_CAL_MIPI_CAL_CTRL          (0x00 / 0x4)
@@ -483,42 +513,193 @@
 #define MIPI_CAL_DSID_MIPI_CAL_CONFIG_2 (0x74 / 0x4)
 
 /*! MIPI CMDs. */
-#define MIPI_DSI_DCS_SHORT_WRITE 0x05
-#define MIPI_DSI_DCS_READ 0x06
-#define MIPI_DSI_DCS_SHORT_WRITE_PARAM 0x15
+#define MIPI_DSI_V_SYNC_START        0x01
+#define MIPI_DSI_COLOR_MODE_OFF      0x02
+#define MIPI_DSI_END_OF_TRANSMISSION 0x08
+#define MIPI_DSI_NULL_PACKET         0x09
+#define MIPI_DSI_V_SYNC_END          0x11
+#define MIPI_DSI_COLOR_MODE_ON       0x12
+#define MIPI_DSI_BLANKING_PACKET     0x19
+#define MIPI_DSI_H_SYNC_START        0x21
+#define MIPI_DSI_SHUTDOWN_PERIPHERAL 0x22
+#define MIPI_DSI_H_SYNC_END          0x31
+#define MIPI_DSI_TURN_ON_PERIPHERAL  0x32
 #define MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE 0x37
-#define MIPI_DSI_DCS_LONG_WRITE 0x39
+
+#define MIPI_DSI_DCS_SHORT_WRITE       0x05
+#define MIPI_DSI_DCS_READ              0x06
+#define MIPI_DSI_DCS_SHORT_WRITE_PARAM 0x15
+#define MIPI_DSI_DCS_LONG_WRITE        0x39
+
+#define MIPI_DSI_GENERIC_LONG_WRITE           0x29
+#define MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM  0x03
+#define MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM  0x13
+#define MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM  0x23
+#define MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM 0x04
+#define MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM 0x14
+#define MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM 0x24
 
 /*! MIPI DCS CMDs. */
-#define MIPI_DCS_GET_DISPLAY_ID   0x04
-#define MIPI_DCS_ENTER_SLEEP_MODE 0x10
-#define MIPI_DCS_EXIT_SLEEP_MODE  0x11
-#define MIPI_DCS_SET_DISPLAY_ON   0x29
+#define MIPI_DCS_NOP                   0x00
+#define MIPI_DCS_SOFT_RESET            0x01
+#define MIPI_DCS_GET_COMPRESSION_MODE  0x03
+#define MIPI_DCS_GET_DISPLAY_ID        0x04
+#define MIPI_DCS_GET_DISPLAY_ID1       0xDA // GET_DISPLAY_ID Byte0, Module Manufacturer ID.
+#define MIPI_DCS_GET_DISPLAY_ID2       0xDB // GET_DISPLAY_ID Byte1, Module/Driver Version ID.
+#define MIPI_DCS_GET_DISPLAY_ID3       0xDC // GET_DISPLAY_ID Byte2, Module/Driver ID.
+#define MIPI_DCS_GET_NUM_ERRORS        0x05
+#define MIPI_DCS_GET_RED_CHANNEL       0x06
+#define MIPI_DCS_GET_GREEN_CHANNEL     0x07
+#define MIPI_DCS_GET_BLUE_CHANNEL      0x08
+#define MIPI_DCS_GET_DISPLAY_STATUS    0x09
+#define MIPI_DCS_GET_POWER_MODE	       0x0A
+#define MIPI_DCS_GET_ADDRESS_MODE      0x0B
+#define MIPI_DCS_GET_PIXEL_FORMAT      0x0C
+#define MIPI_DCS_GET_DISPLAY_MODE      0x0D
+#define MIPI_DCS_GET_SIGNAL_MODE       0x0E
+#define MIPI_DCS_GET_DIAGNOSTIC_RESULT 0x0F
+#define MIPI_DCS_ENTER_SLEEP_MODE      0x10
+#define MIPI_DCS_EXIT_SLEEP_MODE       0x11
+#define MIPI_DCS_ENTER_PARTIAL_MODE    0x12
+#define MIPI_DCS_ENTER_NORMAL_MODE     0x13
+#define MIPI_DCS_EXIT_INVERT_MODE      0x20
+#define MIPI_DCS_ENTER_INVERT_MODE     0x21
+#define MIPI_DCS_ALL_PIXELS_OFF        0x22
+#define MIPI_DCS_ALL_PIXELS_ON         0x23
+#define MIPI_DCS_SET_CONTRAST          0x25 // VCON in 40mV steps. 7-bit integer.
+#define MIPI_DCS_SET_GAMMA_CURVE       0x26
+#define MIPI_DCS_SET_DISPLAY_OFF       0x28
+#define MIPI_DCS_SET_DISPLAY_ON        0x29
+#define MIPI_DCS_SET_COLUMN_ADDRESS    0x2A
+#define MIPI_DCS_SET_PAGE_ADDRESS      0x2B
+#define MIPI_DCS_WRITE_MEMORY_START    0x2C
+#define MIPI_DCS_WRITE_LUT             0x2D // 24-bit: 192 bytes.
+#define MIPI_DCS_READ_MEMORY_START     0x2E
+#define MIPI_DCS_SET_PARTIAL_ROWS      0x30
+#define MIPI_DCS_SET_PARTIAL_COLUMNS   0x31
+#define MIPI_DCS_SET_SCROLL_AREA       0x33
+#define MIPI_DCS_SET_TEAR_OFF          0x34
+#define MIPI_DCS_SET_TEAR_ON           0x35
+#define MIPI_DCS_SET_ADDRESS_MODE      0x36
+#define MIPI_DCS_SET_SCROLL_START      0x37
+#define MIPI_DCS_EXIT_IDLE_MODE        0x38
+#define MIPI_DCS_ENTER_IDLE_MODE       0x39
+#define MIPI_DCS_SET_PIXEL_FORMAT      0x3A
+#define MIPI_DCS_WRITE_MEMORY_CONTINUE 0x3C
+#define MIPI_DCS_READ_MEMORY_CONTINUE  0x3E
+#define MIPI_DCS_GET_3D_CONTROL        0x3F
+#define MIPI_DCS_SET_VSYNC_TIMING      0x40
+#define MIPI_DCS_SET_TEAR_SCANLINE     0x44
+#define MIPI_DCS_GET_SCANLINE          0x45
+#define MIPI_DCS_SET_TEAR_SCANLINE_WIDTH 0x46
+#define MIPI_DCS_GET_SCANLINE_WIDTH    0x47
+#define MIPI_DCS_SET_BRIGHTNESS        0x51 // DCS_CONTROL_DISPLAY_BRIGHTNESS_CTRL.
+#define MIPI_DCS_GET_BRIGHTNESS        0x52
+#define MIPI_DCS_SET_CONTROL_DISPLAY   0x53
+#define MIPI_DCS_GET_CONTROL_DISPLAY   0x54
+#define MIPI_DCS_SET_CABC_VALUE        0x55
+#define MIPI_DCS_GET_CABC_VALUE        0x56
+#define MIPI_DCS_SET_CABC_MIN_BRI      0x5E
+#define MIPI_DCS_GET_CABC_MIN_BRI      0x5F
+#define MIPI_DCS_READ_DDB_START        0xA1
+#define MIPI_DCS_READ_DDB_CONTINUE     0xA8
+
+/*! MIPI DCS Panel Private CMDs. */
+#define MIPI_DCS_PRIV_UNK_A0            0xA0
+#define MIPI_DCS_PRIV_SET_POWER_CONTROL 0xB1
+#define MIPI_DCS_PRIV_SET_EXTC          0xB9
+#define MIPI_DCS_PRIV_UNK_BD            0xBD
+#define MIPI_DCS_PRIV_UNK_D5            0xD5
+#define MIPI_DCS_PRIV_UNK_D6            0xD6
+#define MIPI_DCS_PRIV_UNK_D8            0xD8
+#define MIPI_DCS_PRIV_UNK_D9            0xD9
+
+/*! MIPI DCS CMD Defines. */
+#define DCS_POWER_MODE_DISPLAY_ON           BIT(2)
+#define DCS_POWER_MODE_NORMAL_MODE          BIT(3)
+#define DCS_POWER_MODE_SLEEP_MODE           BIT(4)
+#define DCS_POWER_MODE_PARTIAL_MODE         BIT(5)
+#define DCS_POWER_MODE_IDLE_MODE            BIT(6)
+
+#define DCS_ADDRESS_MODE_V_FLIP             BIT(0)
+#define DCS_ADDRESS_MODE_H_FLIP             BIT(1)
+#define DCS_ADDRESS_MODE_LATCH_RL           BIT(2) // Latch Data Order.
+#define DCS_ADDRESS_MODE_BGR_COLOR          BIT(3)
+#define DCS_ADDRESS_MODE_LINE_ORDER         BIT(4) // Line Refresh Order.
+#define DCS_ADDRESS_MODE_SWAP_XY            BIT(5) // Page/Column Addressing Reverse Order.
+#define DCS_ADDRESS_MODE_MIRROR_X           BIT(6) // Column Address Order.
+#define DCS_ADDRESS_MODE_MIRROR_Y           BIT(7) // Page Address Order.
+#define DCS_ADDRESS_MODE_ROTATION_MASK      (0xF << 4)
+#define DCS_ADDRESS_MODE_ROTATION_90        (DCS_ADDRESS_MODE_SWAP_XY | DCS_ADDRESS_MODE_LINE_ORDER)
+#define DCS_ADDRESS_MODE_ROTATION_180       (DCS_ADDRESS_MODE_MIRROR_X | DCS_ADDRESS_MODE_LINE_ORDER)
+#define DCS_ADDRESS_MODE_ROTATION_270       (DCS_ADDRESS_MODE_SWAP_XY)
+
+#define DCS_GAMMA_CURVE_NONE                0
+#define DCS_GAMMA_CURVE_GC0_1_8             BIT(0)
+#define DCS_GAMMA_CURVE_GC1_2_5             BIT(1)
+#define DCS_GAMMA_CURVE_GC2_1_0             BIT(2)
+#define DCS_GAMMA_CURVE_GC3_1_0             BIT(3) // Are there more?
+
+#define DCS_CONTROL_DISPLAY_BACKLIGHT_CTRL  BIT(2)
+#define DCS_CONTROL_DISPLAY_DIMMING_CTRL    BIT(3)
+#define DCS_CONTROL_DISPLAY_BRIGHTNESS_CTRL BIT(5)
 
 /* Switch Panels:
+ *
+ * 6.2" panels for Icosa and Iowa skus:
  * [10] 81 [26]: JDI LPM062M326A
  * [10] 96 [09]: JDI LAM062M109A
  * [20] 93 [0F]: InnoLux P062CCA-AZ1 (Rev A1)
- * [20] XX [10]: InnoLux P062CCA-AZ2 [UNCONFIRMED ID]
+ * [20] 95 [0F]: InnoLux P062CCA-AZ2
+ * [20] 96 [0F]: InnoLux P062CCA-AZ3
  * [30] 94 [0F]: AUO A062TAN01 (59.06A33.001)
- * [30] XX [10]: AUO A062TAN02 (59.06A33.002) [UNCONFIRMED ID]
+ * [30] 95 [0F]: AUO A062TAN02 (59.06A33.002)
+ *
+ * 5.5" panels for Hoag skus:
+ * [20] 94 [10]: InnoLux 2J055IA-27A (Rev B1)
+ * [30] XX [10]: AUO A055TAN01 (59.05A30.001) [UNCONFIRMED ID]
+ * [40] XX [10]: Vendor 40 [UNCONFIRMED ID]
+ */
+
+/* Display ID Decoding:
+ *
+ * byte0: Vendor
+ * byte1: Model
+ * byte2: Board
+ *
+ * Vendors:
+ * 10h: Japan Display Inc.
+ * 20h: InnoLux Corporation
+ * 30h: AU Optronics
+ * 40h: Unknown1
+ * 50h: Unknown2 (OLED? Samsung? LG?)
+ *
+ * Boards, Panel Size:
+ * 0Fh: Icosa/Iowa, 6.2"
+ * 10h: Hoag,       5.5"
+ * 20h: Unknown,    x.x"
  */
 
 enum
 {
-	PANEL_JDI_LPM062M     = 0x10,
+	PANEL_JDI_XXX062M     = 0x10,
 	PANEL_JDI_LAM062M109A = 0x0910,
 	PANEL_JDI_LPM062M326A = 0x2610,
 	PANEL_INL_P062CCA_AZ1 = 0x0F20,
 	PANEL_AUO_A062TAN01   = 0x0F30,
-	PANEL_INL_P062CCA_AZ2 = 0x1020,
-	PANEL_AUO_A062TAN02   = 0x1030
+	PANEL_INL_2J055IA_27A = 0x1020,
+	PANEL_AUO_A055TAN01   = 0x1030,
+	PANEL_V40_55_UNK      = 0x1040
 };
 
 void display_init();
 void display_backlight_pwm_init();
 void display_end();
 
+/*! Get/Set Display panel ID. */
+u16  display_get_decoded_panel_id();
+void display_set_decoded_panel_id(u32 id);
+
 /*! Show one single color on the display. */
 void display_color_screen(u32 color);
 
@@ -528,6 +709,7 @@ void display_backlight_brightness(u32 brightness, u32 step_delay);
 
 /*! Init display in full 1280x720 resolution (B8G8R8A8, line stride 768, framebuffer size = 1280*768*4 bytes). */
 u32 *display_init_framebuffer_pitch();
+u32 *display_init_framebuffer_pitch_inv();
 u32 *display_init_framebuffer_block();
 u32 *display_init_framebuffer_log();
 void display_activate_console();
@@ -536,4 +718,7 @@ void display_init_cursor(void *crs_fb, u32 size);
 void display_set_pos_cursor(u32 x, u32 y);
 void display_deinit_cursor();
 
+void display_dsi_write(u8 cmd, u32 len, void *data, bool video_enabled);
+int  display_dsi_read(u8 cmd, u32 len, void *data, bool video_enabled);
+
 #endif

bdk/display/di.inl

@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
-* Copyright (c) 2018-2019 CTCaer
+* Copyright (c) 2018-2020 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -20,7 +20,7 @@ static const cfg_op_t _display_dc_setup_win_config[94] = {
 	{DC_CMD_STATE_ACCESS, 0},
 	{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
 	{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
-	{DC_CMD_REG_ACT_CONTROL, 0x54},
+	{DC_CMD_REG_ACT_CONTROL, 0x54}, // Select H counter for win A/B/C.
 	{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
 	{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
@@ -96,16 +96,16 @@ static const cfg_op_t _display_dc_setup_win_config[94] = {
 	{DC_DISP_DISP_INTERFACE_CONTROL, DISP_DATA_FORMAT_DF1P1C},
 	{DC_COM_PIN_OUTPUT_POLARITY(1), 0x1000000},
 	{DC_COM_PIN_OUTPUT_POLARITY(3), 0},
-	{0x4E4, 0},
+	{DC_DISP_BLEND_BACKGROUND_COLOR, 0},
 	{DC_COM_CRC_CONTROL, 0},
 	{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE | WIN_B_UPDATE | WIN_C_UPDATE},
 	{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ | WIN_B_ACT_REQ | WIN_C_ACT_REQ},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
-	{0x716, 0x10000FF},
+	{DC_WINBUF_BLEND_LAYER_CONTROL, 0x10000FF},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
-	{0x716, 0x10000FF},
+	{DC_WINBUF_BLEND_LAYER_CONTROL, 0x10000FF},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
-	{0x716, 0x10000FF},
+	{DC_WINBUF_BLEND_LAYER_CONTROL, 0x10000FF},
 	{DC_CMD_DISPLAY_COMMAND_OPTION0, 0},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
 	{DC_WIN_WIN_OPTIONS, 0},
@@ -120,7 +120,7 @@ static const cfg_op_t _display_dc_setup_win_config[94] = {
 };
 
 //DSI Init config.
-static const cfg_op_t _display_dsi_init_config[61] = {
+static const cfg_op_t _display_dsi_init_config_part1[8] = {
 	{DSI_WR_DATA, 0},
 	{DSI_INT_ENABLE, 0},
 	{DSI_INT_STATUS, 0},
@@ -128,8 +128,9 @@ static const cfg_op_t _display_dsi_init_config[61] = {
 	{DSI_INIT_SEQ_DATA_0, 0},
 	{DSI_INIT_SEQ_DATA_1, 0},
 	{DSI_INIT_SEQ_DATA_2, 0},
-	{DSI_INIT_SEQ_DATA_3, 0},
-	{DSI_INIT_SEQ_DATA_15, 0},
+	{DSI_INIT_SEQ_DATA_3, 0}
+};
+static const cfg_op_t _display_dsi_init_config_part2[14] = {
 	{DSI_DCS_CMDS, 0},
 	{DSI_PKT_SEQ_0_LO, 0},
 	{DSI_PKT_SEQ_1_LO, 0},
@@ -143,7 +144,18 @@ static const cfg_op_t _display_dsi_init_config[61] = {
 	{DSI_PKT_SEQ_3_HI, 0},
 	{DSI_PKT_SEQ_4_HI, 0},
 	{DSI_PKT_SEQ_5_HI, 0},
-	{DSI_CONTROL, 0},
+	{DSI_CONTROL, 0}
+};
+static const cfg_op_t _display_dsi_init_config_part3_t210b01[7] = {
+	{DSI_PAD_CONTROL_1, 0},
+	{DSI_PAD_CONTROL_2, 0},
+	{DSI_PAD_CONTROL_3, 0},
+	{DSI_PAD_CONTROL_4, 0},
+	{DSI_PAD_CONTROL_5_B01, 0},
+	{DSI_PAD_CONTROL_6_B01, 0},
+	{DSI_PAD_CONTROL_7_B01, 0}
+};
+static const cfg_op_t _display_dsi_init_config_part4[10] = {
 	{DSI_PAD_CONTROL_CD, 0},
 	{DSI_SOL_DELAY, 0x18},
 	{DSI_MAX_THRESHOLD, 0x1E0},
@@ -153,8 +165,9 @@ static const cfg_op_t _display_dsi_init_config[61] = {
 	{DSI_PKT_LEN_2_3, 0},
 	{DSI_PKT_LEN_4_5, 0},
 	{DSI_PKT_LEN_6_7, 0},
-	{DSI_PAD_CONTROL_1, 0},
-	{DSI_PHY_TIMING_0, 0x6070601},
+	{DSI_PAD_CONTROL_1, 0}
+};
+static const cfg_op_t _display_dsi_init_config_part5[12] = {
 	{DSI_PHY_TIMING_1, 0x40A0E05},
 	{DSI_PHY_TIMING_2, 0x30109},
 	{DSI_BTA_TIMING, 0x190A14},
@@ -166,8 +179,9 @@ static const cfg_op_t _display_dsi_init_config[61] = {
 	{DSI_POWER_CONTROL, DSI_POWER_CONTROL_ENABLE},
 	{DSI_POWER_CONTROL, 0},
 	{DSI_POWER_CONTROL, 0},
-	{DSI_PAD_CONTROL_1, 0},
-	{DSI_PHY_TIMING_0, 0x6070601},
+	{DSI_PAD_CONTROL_1, 0}
+};
+static const cfg_op_t _display_dsi_init_config_part6[14] = {
 	{DSI_PHY_TIMING_1, 0x40A0E05},
 	{DSI_PHY_TIMING_2, 0x30118},
 	{DSI_BTA_TIMING, 0x190A14},
@@ -187,12 +201,12 @@ static const cfg_op_t _display_dsi_init_config[61] = {
 //DSI panel config.
 static const cfg_op_t _display_init_config_jdi[43] = {
 	{DSI_WR_DATA, 0x439},      // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
-	{DSI_WR_DATA, 0x9483FFB9}, // Enable extension cmd. (Pass: FF 83 94).
+	{DSI_WR_DATA, 0x9483FFB9}, // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
-	{DSI_WR_DATA, 0x00BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x0BD.
+	{DSI_WR_DATA, 0x00BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0 to 0xBD.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x1939},     // MIPI_DSI_DCS_LONG_WRITE: 25 bytes.
-	{DSI_WR_DATA, 0xAAAAAAD8},
+	{DSI_WR_DATA, 0xAAAAAAD8}, // Register: 0xD8.
 	{DSI_WR_DATA, 0xAAAAAAEB},
 	{DSI_WR_DATA, 0xAAEBAAAA},
 	{DSI_WR_DATA, 0xAAAAAAAA},
@@ -200,10 +214,10 @@ static const cfg_op_t _display_init_config_jdi[43] = {
 	{DSI_WR_DATA, 0xAAEBAAAA},
 	{DSI_WR_DATA, 0xAA},
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
-	{DSI_WR_DATA, 0x01BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x1BD.
+	{DSI_WR_DATA, 0x01BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 1 to 0xBD.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x2739},     // MIPI_DSI_DCS_LONG_WRITE: 39 bytes.
-	{DSI_WR_DATA, 0xFFFFFFD8},
+	{DSI_WR_DATA, 0xFFFFFFD8}, // Register: 0xD8.
 	{DSI_WR_DATA, 0xFFFFFFFF},
 	{DSI_WR_DATA, 0xFFFFFFFF},
 	{DSI_WR_DATA, 0xFFFFFFFF},
@@ -214,27 +228,25 @@ static const cfg_op_t _display_init_config_jdi[43] = {
 	{DSI_WR_DATA, 0xFFFFFFFF},
 	{DSI_WR_DATA, 0xFFFFFF},
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
-	{DSI_WR_DATA, 0x02BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x2BD.
+	{DSI_WR_DATA, 0x02BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 2 to 0xBD.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0xF39},      // MIPI_DSI_DCS_LONG_WRITE: 15 bytes.
-	{DSI_WR_DATA, 0xFFFFFFD8},
+	{DSI_WR_DATA, 0xFFFFFFD8}, // Register: 0xD8.
 	{DSI_WR_DATA, 0xFFFFFFFF},
 	{DSI_WR_DATA, 0xFFFFFFFF},
 	{DSI_WR_DATA, 0xFFFFFF},
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
-	{DSI_WR_DATA, 0x00BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x0BD.
+	{DSI_WR_DATA, 0x00BD15},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0 to 0xBD.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
-	{DSI_WR_DATA, 0x06D915},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x6D9.
+	{DSI_WR_DATA, 0x06D915},   // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 6 to 0xD9.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x439},      // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
-	{DSI_WR_DATA, 0x000000B9}, // Disable extension cmd.
+	{DSI_WR_DATA, 0x000000B9}, // MIPI_DCS_PRIV_SET_EXTC. Disable.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST}
 };
 
 //DSI packet config.
-static const cfg_op_t _display_dsi_packet_config[21] = {
-	{DSI_PAD_CONTROL_1, 0},
-	{DSI_PHY_TIMING_0, 0x6070601},
+static const cfg_op_t _display_dsi_packet_config[19] = {
 	{DSI_PHY_TIMING_1, 0x40A0E05},
 	{DSI_PHY_TIMING_2, 0x30172},
 	{DSI_BTA_TIMING, 0x190A14},
@@ -253,7 +265,7 @@ static const cfg_op_t _display_dsi_packet_config[21] = {
 	{DSI_PKT_LEN_2_3, 0x87001A2},
 	{DSI_PKT_LEN_4_5, 0x190},
 	{DSI_PKT_LEN_6_7, 0x190},
-	{DSI_HOST_CONTROL, 0},
+	{DSI_HOST_CONTROL, 0}
 };
 
 //DSI mode config.
@@ -271,29 +283,44 @@ static const cfg_op_t _display_dsi_mode_config[10] = {
 };
 
 //MIPI CAL config.
-static const cfg_op_t _display_mipi_pad_cal_config[6] = {
+static const cfg_op_t _display_mipi_pad_cal_config[4] = {
 	{MIPI_CAL_MIPI_BIAS_PAD_CFG2,  0},
 	{MIPI_CAL_CIL_MIPI_CAL_STATUS, 0xF3F10000},
 	{MIPI_CAL_MIPI_BIAS_PAD_CFG0,  0},
-	{MIPI_CAL_MIPI_BIAS_PAD_CFG2,  0},
-	{MIPI_CAL_MIPI_BIAS_PAD_CFG2,  0x10010},
-	{MIPI_CAL_MIPI_BIAS_PAD_CFG1,  0x300}
+	{MIPI_CAL_MIPI_BIAS_PAD_CFG2,  0}
 };
 
 //DSI config.
-static const cfg_op_t _display_dsi_pad_cal_config[4] = {
+static const cfg_op_t _display_dsi_pad_cal_config_t210[4] = {
 	{DSI_PAD_CONTROL_1, 0},
 	{DSI_PAD_CONTROL_2, 0},
 	{DSI_PAD_CONTROL_3, DSI_PAD_PREEMP_PD_CLK(0x3) | DSI_PAD_PREEMP_PU_CLK(0x3) | DSI_PAD_PREEMP_PD(0x03) | DSI_PAD_PREEMP_PU(0x3)},
 	{DSI_PAD_CONTROL_4, 0}
 };
+static const cfg_op_t _display_dsi_pad_cal_config_t210b01[7] = {
+	{DSI_PAD_CONTROL_1, 0},
+	{DSI_PAD_CONTROL_2, 0},
+	{DSI_PAD_CONTROL_3, 0},
+	{DSI_PAD_CONTROL_4, 0x77777},
+	{DSI_PAD_CONTROL_5_B01, 0x77777},
+	{DSI_PAD_CONTROL_6_B01, 0x1111},
+	{DSI_PAD_CONTROL_7_B01, 0}
+};
 
 //MIPI CAL config.
-static const cfg_op_t _display_mipi_apply_dsi_cal_config[16] = {
+static const cfg_op_t _display_mipi_dsi_cal_offsets_config_t210[4] = {
 	{MIPI_CAL_DSIA_MIPI_CAL_CONFIG,   0x200200},
 	{MIPI_CAL_DSIB_MIPI_CAL_CONFIG,   0x200200},
 	{MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2, 0x200002},
-	{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0x200002},
+	{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0x200002}
+};
+static const cfg_op_t _display_mipi_dsi_cal_offsets_config_t210b01[4] = {
+	{MIPI_CAL_DSIA_MIPI_CAL_CONFIG,   0x200006},
+	{MIPI_CAL_DSIB_MIPI_CAL_CONFIG,   0x200006},
+	{MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2, 0x260000},
+	{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0x260000}
+};
+static const cfg_op_t _display_mipi_apply_dsi_cal_config[12] = {
 	{MIPI_CAL_CILA_MIPI_CAL_CONFIG,   0},
 	{MIPI_CAL_CILB_MIPI_CAL_CONFIG,   0},
 	{MIPI_CAL_CILC_MIPI_CAL_CONFIG,   0},
@@ -372,16 +399,16 @@ static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
 	{DC_DISP_DISP_INTERFACE_CONTROL, DISP_DATA_FORMAT_DF1P1C},
 	{DC_COM_PIN_OUTPUT_POLARITY(1), 0x1000000},
 	{DC_COM_PIN_OUTPUT_POLARITY(3), 0},
-	{0x4E4, 0},
+	{DC_DISP_BLEND_BACKGROUND_COLOR, 0},
 	{DC_COM_CRC_CONTROL, 0},
 	{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE | WIN_B_UPDATE | WIN_C_UPDATE},
 	{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ | WIN_B_ACT_REQ | WIN_C_ACT_REQ},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
-	{0x716, 0x10000FF},
+	{DC_WINBUF_BLEND_LAYER_CONTROL, 0x10000FF},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
-	{0x716, 0x10000FF},
+	{DC_WINBUF_BLEND_LAYER_CONTROL, 0x10000FF},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
-	{0x716, 0x10000FF},
+	{DC_WINBUF_BLEND_LAYER_CONTROL, 0x10000FF},
 	{DC_CMD_DISPLAY_COMMAND_OPTION0, 0},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
 	{DC_WIN_WIN_OPTIONS, 0},
@@ -394,14 +421,37 @@ static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
 	{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE | WIN_B_UPDATE | WIN_C_UPDATE},
 	{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ | WIN_B_ACT_REQ | WIN_C_ACT_REQ},
 	{DC_CMD_STATE_ACCESS, 0},
-	/* Set Display timings */
+
+	/* Set Display timings
+	 *
+	 * DC_DISP_REF_TO_SYNC:
+	 *  V_REF_TO_SYNC - 1
+	 *  H_REF_TO_SYNC - 0
+	 *
+	 * DC_DISP_SYNC_WIDTH:
+	 *  V_SYNC_WIDTH - 1
+	 *  H_SYNC_WIDTH - 72
+	 *
+	 * DC_DISP_BACK_PORCH:
+	 *  V_BACK_PORCH - 9
+	 *  H_BACK_PORCH - 72
+	 *
+	 * DC_DISP_ACTIVE:
+	 *  V_DISP_ACTIVE - 1280
+	 *  H_DISP_ACTIVE - 720
+	 *
+	 * DC_DISP_FRONT_PORCH:
+	 *  V_FRONT_PORCH - 10
+	 *  H_FRONT_PORCH - 136
+	 */
 	{DC_DISP_DISP_TIMING_OPTIONS, 0},
-	{DC_DISP_REF_TO_SYNC, (1 << 16)}, // h_ref_to_sync = 0, v_ref_to_sync = 1.
+	{DC_DISP_REF_TO_SYNC, 0x10000},
 	{DC_DISP_SYNC_WIDTH,  0x10048},
 	{DC_DISP_BACK_PORCH,  0x90048},
 	{DC_DISP_ACTIVE,      0x50002D0},
-	{DC_DISP_FRONT_PORCH, 0xA0088},   // Sources say that this should be above the DC_DISP_ACTIVE cmd.
+	{DC_DISP_FRONT_PORCH, 0xA0088},   // Sources say that this should happen before DC_DISP_ACTIVE cmd.
 	/* End of Display timings */
+
 	{DC_DISP_SHIFT_CLOCK_OPTIONS, SC1_H_QUALIFIER_NONE | SC0_H_QUALIFIER_NONE},
 	{DC_COM_PIN_OUTPUT_ENABLE(1), 0},
 	{DC_DISP_DATA_ENABLE_OPTIONS, DE_SELECT_ACTIVE | DE_CONTROL_NORMAL},
@@ -477,10 +527,10 @@ static const cfg_op_t _display_dsi_timing_deinit_config[16] = {
 //DSI config (if ver == 0x10).
 static const cfg_op_t _display_deinit_config_jdi[22] = {
 	{DSI_WR_DATA, 0x439},      // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
-	{DSI_WR_DATA, 0x9483FFB9}, // Enable extension cmd. (Pass: FF 83 94).
+	{DSI_WR_DATA, 0x9483FFB9}, // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x2139},     // MIPI_DSI_DCS_LONG_WRITE: 33 bytes.
-	{DSI_WR_DATA, 0x191919D5},
+	{DSI_WR_DATA, 0x191919D5}, // Register: 0xD5.
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_WR_DATA, 0x19191919},
@@ -491,21 +541,21 @@ static const cfg_op_t _display_deinit_config_jdi[22] = {
 	{DSI_WR_DATA, 0x19},
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0xB39},      // MIPI_DSI_DCS_LONG_WRITE: 11 bytes.
-	{DSI_WR_DATA, 0x4F0F41B1}, // Set Power control.
+	{DSI_WR_DATA, 0x4F0F41B1}, // MIPI_DCS_PRIV_SET_POWER_CONTROL.
 	{DSI_WR_DATA, 0xF179A433},
 	{DSI_WR_DATA, 0x002D81},
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x439},      // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
-	{DSI_WR_DATA, 0x000000B9}, // Disable extension cmd.
+	{DSI_WR_DATA, 0x000000B9}, // MIPI_DCS_PRIV_SET_EXTC. Disable.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST}
 };
 
 static const cfg_op_t _display_deinit_config_auo[37] = {
 	{DSI_WR_DATA, 0x439},      // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
-	{DSI_WR_DATA, 0x9483FFB9}, // Enable extension cmd. (Pass: FF 83 94).
+	{DSI_WR_DATA, 0x9483FFB9}, // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x2C39},     // MIPI_DSI_DCS_LONG_WRITE: 44 bytes.
-	{DSI_WR_DATA, 0x191919D5},
+	{DSI_WR_DATA, 0x191919D5}, // Register: 0xD5.
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_WR_DATA, 0x19191919},
@@ -518,7 +568,7 @@ static const cfg_op_t _display_deinit_config_auo[37] = {
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x2C39},     // MIPI_DSI_DCS_LONG_WRITE: 44 bytes.
-	{DSI_WR_DATA, 0x191919D6},
+	{DSI_WR_DATA, 0x191919D6}, // Register: 0xD6.
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_WR_DATA, 0x19191919},
@@ -531,13 +581,13 @@ static const cfg_op_t _display_deinit_config_auo[37] = {
 	{DSI_WR_DATA, 0x19191919},
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0xB39},      // MIPI_DSI_DCS_LONG_WRITE: 11 bytes.
-	{DSI_WR_DATA, 0x711148B1}, // Set Power control. (Not deep standby, BT1 / XDK, VRH gamma volt adj 49 / x40).
-	// Set Power control. (NVRH gamma volt adj 9, Amplifier current small / x30, FS0 freq Fosc/80 / FS1 freq Fosc/32, Enter standby / PON / VCOMG).
+	{DSI_WR_DATA, 0x711148B1}, // MIPI_DCS_PRIV_SET_POWER_CONTROL. (Not deep standby, BT1 / XDK, VRH gamma volt adj 49 / x40).
+	// (NVRH gamma volt adj 9, Amplifier current small / x30, FS0 freq Fosc/80 / FS1 freq Fosc/32, Enter standby / PON / VCOMG).
 	{DSI_WR_DATA, 0x71143209},
-	{DSI_WR_DATA, 0x114D31},   // Set Power control. (Unknown).
+	{DSI_WR_DATA, 0x114D31},   // (Unknown).
 	{DSI_TRIGGER, DSI_TRIGGER_HOST},
 	{DSI_WR_DATA, 0x439},      // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
-	{DSI_WR_DATA, 0x000000B9}, // Disable extension cmd.
+	{DSI_WR_DATA, 0x000000B9}, // MIPI_DCS_PRIV_SET_EXTC. Disable.
 	{DSI_TRIGGER, DSI_TRIGGER_HOST}
 };
 
@@ -559,8 +609,44 @@ static const cfg_op_t cfg_display_one_color[8] = {
 	{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY} // Continuous display.
 };
 
-//Display A config pitch.
-static const cfg_op_t cfg_display_framebuffer_pitch[34] = {
+//Display A config linear pitch.
+static const cfg_op_t cfg_display_framebuffer_pitch[32] = {
+	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, // NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8.
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_WIN_POSITION, 0}, //(0,0)
+	{DC_WIN_H_INITIAL_DDA, 0},
+	{DC_WIN_V_INITIAL_DDA, 0},
+	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(720 * 4)},
+	{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
+	{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
+	{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, // 720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
+	{DC_WIN_BUFFER_CONTROL, BUFFER_CONTROL_HOST},
+	{DC_WINBUF_SURFACE_KIND, PITCH},
+	{DC_WINBUF_START_ADDR, IPL_FB_ADDRESS}, // Framebuffer address.
+	{DC_WINBUF_ADDR_H_OFFSET, 0},
+	{DC_WINBUF_ADDR_V_OFFSET, 0},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_WIN_OPTIONS, WIN_ENABLE}, // Enable window AD.
+	{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, // Continuous display.
+	{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE},
+	{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
+};
+
+//Display A config linear pitch inverse + Win D support.
+static const cfg_op_t cfg_display_framebuffer_pitch_inv[34] = {
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_D_SELECT},
 	{DC_WIN_WIN_OPTIONS, 0},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
@@ -576,7 +662,7 @@ static const cfg_op_t cfg_display_framebuffer_pitch[34] = {
 	{DC_WIN_POSITION, 0}, //(0,0)
 	{DC_WIN_H_INITIAL_DDA, 0},
 	{DC_WIN_V_INITIAL_DDA, 0},
-	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)},
+	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(720 * 4)},
 	{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
 	{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
 	{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, // 720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
@@ -614,7 +700,7 @@ static const cfg_op_t cfg_display_framebuffer_block[34] = {
 	{DC_WIN_POSITION, 0}, //(0,0)
 	{DC_WIN_H_INITIAL_DDA, 0},
 	{DC_WIN_V_INITIAL_DDA, 0},
-	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)},
+	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(720 * 4)},
 	{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
 	{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
 	{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(1280 * 2) | LINE_STRIDE(1280 * 4)}, //720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.

bdk/fatfs_cfg.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2020 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,11 +14,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef _CLUSTER_H_
-#define _CLUSTER_H_
+#ifndef _FATFS_CFG_H_
+#define _FATFS_CFG_H_
 
-#include "../utils/types.h"
-
-void cluster_boot_cpu0(u32 entry);
+#ifdef FFCFG_INC
+#include FFCFG_INC
+#endif
 
 #endif

bdk/gfx_utils.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2020 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,6 +14,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "../utils/types.h"
+#ifndef _GFX_UTILS_H_
+#define _GFX_UTILS_H_
 
-char *dirlist(const char *directory, const char *pattern, bool includeHiddenFiles);
+#ifdef GFX_INC
+#include GFX_INC
+#endif
+
+#endif

bdk/ianos/elfload/elfload.h

@@ -22,10 +22,10 @@
 #include "elfarch.h"
 #include "elf.h"
 
-#include "../../utils/types.h"
+#include <utils/types.h>
 
 #ifdef DEBUG
-#include "../../gfx/gfx.h"
+#include <gfx_utils.h>
 #define EL_DEBUG(format, ...) \
 	gfx_printf(format __VA_OPT__(, ) __VA_ARGS__)
 #else

bdk/ianos/ianos.c

@@ -18,12 +18,13 @@
 #include <string.h>
 
 #include "ianos.h"
-#include "../../common/common_module.h"
-#include "../gfx/gfx.h"
-#include "../libs/elfload/elfload.h"
-#include "../mem/heap.h"
-#include "../storage/nx_sd.h"
-#include "../utils/types.h"
+#include "elfload/elfload.h"
+#include <module.h>
+#include <mem/heap.h>
+#include <storage/nx_sd.h>
+#include <utils/types.h>
+
+#include <gfx_utils.h>
 
 #define IRAM_LIB_ADDR 0x4002B000
 #define DRAM_LIB_ADDR 0xE0000000
@@ -36,8 +37,8 @@ void *fileBuf = NULL;
 static void _ianos_call_ep(moduleEntrypoint_t entrypoint, void *moduleConfig)
 {
 	bdkParams_t bdkParameters = (bdkParams_t)malloc(sizeof(struct _bdkParams_t));
-	bdkParameters->gfxCon = &gfx_con;
-	bdkParameters->gfxCtx = &gfx_ctxt;
+	bdkParameters->gfxCon = (void *)&gfx_con;
+	bdkParameters->gfxCtx = (void *)&gfx_ctxt;
 	bdkParameters->memcpy = (memcpy_t)&memcpy;
 	bdkParameters->memset = (memset_t)&memset;
 	bdkParameters->sharedHeap = &_heap;
@@ -63,26 +64,20 @@ static bool _ianos_read_cb(el_ctx *ctx, void *dest, size_t numberBytes, size_t o
 }
 
 //TODO: Support shared libraries.
-uintptr_t ianos_loader(bool sdmount, char *path, elfType_t type, void *moduleConfig)
+uintptr_t ianos_loader(char *path, elfType_t type, void *moduleConfig)
 {
+	el_ctx ctx;
 	uintptr_t epaddr = 0;
 
-	if (sdmount)
-	{
-		if (!sd_mount())
-			goto elfLoadFinalOut;
-	}
+	if (!sd_mount())
+		goto elfLoadFinalOut;
 
+	// Read library.
 	fileBuf = sd_file_read(path, NULL);
 
-	if (sdmount)
-		sd_unmount();
-
 	if (!fileBuf)
 		goto elfLoadFinalOut;
 
-
-	el_ctx ctx;
 	ctx.pread = _ianos_read_cb;
 
 	if (el_init(&ctx))
@@ -94,7 +89,6 @@ uintptr_t ianos_loader(bool sdmount, char *path, elfType_t type, void *moduleCon
 	case EXEC_ELF:
 	case AR64_ELF:
 		elfBuf = (void *)DRAM_LIB_ADDR;
-		sd_unmount();
 		break;
 	default:
 		elfBuf = malloc(ctx.memsz); // Aligned to 0x10 by default.
@@ -123,6 +117,5 @@ elfFreeOut:
 	fileBuf = NULL;
 
 elfLoadFinalOut:
-
 	return epaddr;
 }

bdk/ianos/ianos.h

@@ -18,7 +18,7 @@
 #ifndef IANOS_H
 #define IANOS_H
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 typedef enum
 {
@@ -29,6 +29,6 @@ typedef enum
 	KEEP_IN_RAM = (1 << 31)  // Shared library mask.
 } elfType_t;
 
-uintptr_t ianos_loader(bool sdmount, char *path, elfType_t type, void* config);
+uintptr_t ianos_loader(char *path, elfType_t type, void* config);
 
 #endif

bdk/input/als.c

@@ -17,11 +17,11 @@
  */
 
 #include "als.h"
-#include "../power/max77620.h"
-#include "../soc/clock.h"
-#include "../soc/i2c.h"
-#include "../soc/pinmux.h"
-#include "../utils/util.h"
+#include <power/max7762x.h>
+#include <soc/clock.h>
+#include <soc/i2c.h>
+#include <soc/pinmux.h>
+#include <utils/util.h>
 
 #define HOS_GAIN  BH1730_GAIN_64X
 #define HOS_ITIME 38
@@ -97,13 +97,16 @@ void get_als_lux(als_table_t *als_val)
 
 u8 als_init(als_table_t *als_val)
 {
+	// Enable power to ALS IC.
+	max7762x_regulator_set_voltage(REGULATOR_LDO6, 2900000);
+	max7762x_regulator_enable(REGULATOR_LDO6, true);
+
+	// Init I2C2.
 	pinmux_config_i2c(I2C_2);
 	clock_enable_i2c(I2C_2);
 	i2c_init(I2C_2);
 
-	max77620_regulator_set_volt_and_flags(REGULATOR_LDO6, 2900000, MAX77620_POWER_MODE_NORMAL);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_LDO6_CFG2, 0xD8 | MAX77620_LDO_CFG2_ADE_MASK);
-
+	// Initialize ALS.
 	u8 id = i2c_recv_byte(I2C_2, BH1730_I2C_ADDR, BH1730_ADDR(0x12));
 	i2c_send_byte(I2C_2, BH1730_I2C_ADDR, BH1730_SPEC(BH1730_SPECCMD_RESET), 0);
 	i2c_send_byte(I2C_2, BH1730_I2C_ADDR, BH1730_ADDR(BH1730_GAIN_REG), HOS_GAIN);

bdk/input/als.h

@@ -19,7 +19,7 @@
 #ifndef __ALS_H_
 #define __ALS_H_
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 #define BH1730_I2C_ADDR 0x29
 
@@ -45,8 +45,8 @@
 #define BH1730_DATA1LOW_REG  0x16
 #define BH1730_DATA1HIGH_REG 0x17
 
-#define BH1730_ADDR(reg) (BH1730_CMD_MAGIC | BH1730_CMD_SETADDR | reg)
-#define BH1730_SPEC(cmd) (BH1730_CMD_MAGIC | BH1730_CMD_SPECCMD | cmd)
+#define BH1730_ADDR(reg) (BH1730_CMD_MAGIC | BH1730_CMD_SETADDR | (reg))
+#define BH1730_SPEC(cmd) (BH1730_CMD_MAGIC | BH1730_CMD_SPECCMD | (cmd))
 
 typedef struct _als_table_t
 {

bdk/input/joycon.c

@@ -19,48 +19,57 @@
 #include <string.h>
 
 #include "joycon.h"
-#include "../gfx/gfx.h"
-#include "../power/max17050.h"
-#include "../power/regulator_5v.h"
-#include "../soc/bpmp.h"
-#include "../soc/clock.h"
-#include "../soc/gpio.h"
-#include "../soc/pinmux.h"
-#include "../soc/uart.h"
-#include "../soc/t210.h"
-#include "../utils/util.h"
+#include <gfx_utils.h>
+#include <power/max17050.h>
+#include <power/regulator_5v.h>
+#include <soc/bpmp.h>
+#include <soc/clock.h>
+#include <soc/fuse.h>
+#include <soc/gpio.h>
+#include <soc/pinmux.h>
+#include <soc/uart.h>
+#include <soc/t210.h>
+#include <utils/util.h>
 
 // For disabling driver when logging is enabled.
-#include "../libs/lvgl/lvgl.h"
+#include <libs/lv_conf.h>
 
-#define JC_WIRED_CMD        0x91
-#define JC_WIRED_HID        0x92
-#define JC_WIRED_INIT_REPLY 0x94
-#define JC_INIT_HANDSHAKE   0xA5
+#define JC_WIRED_CMD             0x91
+#define JC_WIRED_HID             0x92
+#define JC_WIRED_INIT_REPLY      0x94
+#define JC_INIT_HANDSHAKE        0xA5
 
-#define JC_WIRED_CMD_MAC 0x01
-#define JC_WIRED_CMD_10  0x10
+#define JC_HORI_INPUT_RPT_CMD    0x9A
+#define JC_HORI_INPUT_RPT        0x00
 
-#define JC_HID_OUTPUT_RPT 0x01
-#define JC_HID_RUMBLE_RPT 0x10
+#define JC_WIRED_CMD_MAC         0x01
+#define JC_WIRED_CMD_10          0x10
 
-#define JC_HID_INPUT_RPT  0x30
-#define JC_HID_SUBMCD_RPT 0x21
+#define JC_HID_OUTPUT_RPT        0x01
+#define JC_HID_RUMBLE_RPT        0x10
+
+#define JC_HID_INPUT_RPT         0x30
+#define JC_HID_SUBMCD_RPT        0x21
 
 #define JC_HID_SUBCMD_HCI_STATE  0x06
-#define  HCI_STATE_SLEEP     0x00
-#define  HCI_STATE_RECONNECT 0x01
-#define  HCI_STATE_PAIR      0x02
-#define  HCI_STATE_HOME      0x04
+#define  HCI_STATE_SLEEP         0x00
+#define  HCI_STATE_RECONNECT     0x01
+#define  HCI_STATE_PAIR          0x02
+#define  HCI_STATE_HOME          0x04
 #define JC_HID_SUBCMD_SPI_READ   0x10
+#define  SPI_READ_OFFSET         0x20
 #define JC_HID_SUBCMD_RUMBLE_CTL 0x48
 #define JC_HID_SUBCMD_SND_RUMBLE 0xFF
 
 #define JC_BTN_MASK_L 0xFF2900 // 0xFFE900: with charge status.
-#define JC_BTN_MASK_R 0x76FF
+#define JC_BTN_MASK_R 0x0056FF
 
-#define JC_ID_L 1
-#define JC_ID_R 2
+#define JC_ID_L     0x01
+#define JC_ID_R     0x02
+#define JC_ID_HORI  0x20
+
+#define JC_CRC8_INIT    0x00
+#define JC_CRC8_POLY    0x8D
 
 enum
 {
@@ -78,25 +87,31 @@ static const u8 init_jc[] = {
 static const u8 init_handshake[] = {
 	0x19, 0x01, 0x03, 0x07, 0x00,      // Uart header.
 	JC_INIT_HANDSHAKE, 0x02,           // Wired cmd and wired subcmd.
-	0x01, 0x7E, 0x00, 0x00, 0x00       // Wired subcmd data.
+	0x01, 0x7E, 0x00, 0x00, 0x00       // Wired subcmd data and crc.
 };
 
 static const u8 init_get_info[]  = {
 	0x19, 0x01, 0x03, 0x07, 0x00,      // Uart header.
 	JC_WIRED_CMD, JC_WIRED_CMD_MAC,    // Wired cmd and subcmd.
-	0x00, 0x00, 0x00, 0x00, 0x24       // Wired subcmd data.
+	0x00, 0x00, 0x00, 0x00, 0x24       // Wired subcmd data and crc.
 };
 
-static const u8 init_finilize[]  = {
+static const u8 init_finalize[]  = {
 	0x19, 0x01, 0x03, 0x07, 0x00,      // Uart header.
 	JC_WIRED_CMD, JC_WIRED_CMD_10,     // Wired cmd and subcmd.
-	0x00, 0x00, 0x00, 0x00, 0x3D       // Wired subcmd data.
+	0x00, 0x00, 0x00, 0x00, 0x3D       // Wired subcmd data and crc.
 };
 
 static const u8 nx_pad_status[]  = {
 	0x19, 0x01, 0x03, 0x08, 0x00,      // Uart header.
 	JC_WIRED_HID, 0x00,                // Wired cmd and hid cmd.
-	0x01, 0x00, 0x00, 0x69, 0x2D, 0x1F // hid data.
+	0x01, 0x00, 0x00, 0x69, 0x2D, 0x1F // hid data and crc.
+};
+
+static const u8 hori_pad_status[] = {
+	0x19, 0x01, 0x03, 0x07, 0x00,      // Uart header.
+	JC_HORI_INPUT_RPT_CMD, 0x01,       // Hori cmd and hori subcmd.
+	0x00, 0x00, 0x00, 0x00, 0x48       // Hori cmd data and crc.
 };
 
 typedef struct _jc_uart_hdr_t
@@ -183,8 +198,8 @@ typedef struct _joycon_ctxt_t
 	u8 connected;
 } joycon_ctxt_t;
 
-static joycon_ctxt_t jc_l;
-static joycon_ctxt_t jc_r;
+static joycon_ctxt_t jc_l = {0};
+static joycon_ctxt_t jc_r = {0};
 
 static bool jc_init_done = false;
 static u32 hid_pkt_inc = 0;
@@ -193,33 +208,49 @@ static jc_gamepad_rpt_t jc_gamepad;
 
 void jc_power_supply(u8 uart, bool enable);
 
+static u8 jc_crc(u8 *data, u16 len)
+{
+	u8 crc = JC_CRC8_INIT;
+	u16 i, j;
+	for (i = 0; i < len; i++) {
+		crc ^= data[i];
+		for (j = 0; j < 8; j++) {
+			if ((crc & 0x80) != 0)
+				crc = (u8)((crc << 1) ^ JC_CRC8_POLY);
+			else
+				crc <<= 1;
+		}
+	}
+	return crc;
+}
+
 void joycon_send_raw(u8 uart_port, const u8 *buf, u16 size)
 {
 	uart_send(uart_port, buf, size);
 	uart_wait_idle(uart_port, UART_TX_IDLE);
 }
 
-static u16 jc_packet_add_uart_hdr(jc_wired_hdr_t *out, u8 wired_cmd, u8 *data, u16 size)
+static u16 jc_packet_add_uart_hdr(jc_wired_hdr_t *out, u8 wired_cmd, u8 *data, u16 size, bool crc)
 {
 	out->uart_hdr.magic[0] = 0x19;
 	out->uart_hdr.magic[1] = 0x01;
 	out->uart_hdr.magic[2] = 0x3;
 
-	out->uart_hdr.total_size_lsb = 7;
+	out->uart_hdr.total_size_lsb = sizeof(jc_wired_hdr_t) - sizeof(jc_uart_hdr_t);
 	out->uart_hdr.total_size_msb = 0;
 	out->cmd = wired_cmd;
 
 	if (data)
 		memcpy(out->data, data, size);
 
-	out->crc = 0; // wired crc8ccit can be skipped.
+	out->crc = crc ? jc_crc(&out->uart_hdr.total_size_msb, sizeof(out->uart_hdr.total_size_msb) + sizeof(out->cmd) + sizeof(out->data)) : 0;
 
 	return sizeof(jc_wired_hdr_t);
 }
 
-static u16 jc_hid_output_rpt_craft(jc_wired_hdr_t *rpt, u8 *payload, u16 size)
+static u16 jc_hid_output_rpt_craft(jc_wired_hdr_t *rpt, u8 *payload, u16 size, bool crc)
 {
-	u16 pkt_size = jc_packet_add_uart_hdr(rpt, JC_WIRED_HID, NULL, 0);
+	u16 pkt_size = jc_packet_add_uart_hdr(rpt, JC_WIRED_HID, NULL, 0, crc);
 	pkt_size += size;
 
 	rpt->uart_hdr.total_size_lsb += size;
@@ -232,12 +263,12 @@ static u16 jc_hid_output_rpt_craft(jc_wired_hdr_t *rpt, u8 *payload, u16 size)
 	return pkt_size;
 }
 
-void jc_send_hid_output_rpt(u8 uart, u8 *payload, u16 size)
+void jc_send_hid_output_rpt(u8 uart, u8 *payload, u16 size, bool crc)
 {
 	u8 rpt[0x50];
 	memset(rpt, 0, sizeof(rpt));
 
-	u32 rpt_size = jc_hid_output_rpt_craft((jc_wired_hdr_t *)rpt, payload, size);
+	u32 rpt_size = jc_hid_output_rpt_craft((jc_wired_hdr_t *)rpt, payload, size, crc);
 
 	joycon_send_raw(uart, rpt, rpt_size);
 }
@@ -273,18 +304,18 @@ void jc_send_hid_cmd(u8 uart, u8 subcmd, u8 *data, u16 size)
 		hid_pkt->subcmd = JC_HID_SUBCMD_RUMBLE_CTL;
 		hid_pkt->subcmd_data[0] = 1;
 		if (send_r_rumble)
-			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 0x10);
+			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 0x10, false);
 		if (send_l_rumble)
-			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 0x10);
+			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 0x10, false);
 
 		// Send rumble.
 		hid_pkt->cmd = JC_HID_RUMBLE_RPT;
 		hid_pkt->pkt_id = jc_hid_pkt_id_incr();
 		memcpy(hid_pkt->rumble, rumble_init, sizeof(rumble_init));
 		if (send_r_rumble)
-			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 10);
+			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 10, false);
 		if (send_l_rumble)
-			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 10);
+			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 10, false);
 
 		msleep(15);
 
@@ -295,27 +326,21 @@ void jc_send_hid_cmd(u8 uart, u8 subcmd, u8 *data, u16 size)
 		hid_pkt->subcmd_data[0] = 0;
 		memcpy(hid_pkt->rumble, rumble_neutral, sizeof(rumble_neutral));
 		if (send_r_rumble)
-			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 0x10);
+			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 0x10, false);
 		if (send_l_rumble)
-			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 0x10);
+			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 0x10, false);
 	}
 	else
 	{
+		bool crc_needed = (jc_l.uart == uart) ? (jc_l.type & JC_ID_HORI) : (jc_r.type & JC_ID_HORI);
+
 		hid_pkt->cmd = JC_HID_OUTPUT_RPT;
 		hid_pkt->pkt_id = jc_hid_pkt_id_incr();
 		hid_pkt->subcmd = subcmd;
 		if (data)
 			memcpy(hid_pkt->subcmd_data, data, size);
 
-		u8 pkt_size = sizeof(jc_hid_out_rpt_t) + size;
-
-		if (subcmd != JC_HID_SUBCMD_SPI_READ)
-			jc_send_hid_output_rpt(uart, (u8 *)hid_pkt, pkt_size);
-		else
-		{
-			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, pkt_size);
-			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, pkt_size);
-		}
+		jc_send_hid_output_rpt(uart, (u8 *)hid_pkt, sizeof(jc_hid_out_rpt_t) + size, crc_needed);
 	}
 }
 
@@ -337,6 +362,7 @@ static void jc_parse_wired_hid(joycon_ctxt_t *jc, const u8* packet, u32 size)
 
 	switch (hid_pkt->cmd)
 	{
+	case JC_HORI_INPUT_RPT:
 	case JC_HID_INPUT_RPT:
 		btn_tmp = hid_pkt->btn_right | hid_pkt->btn_shared << 8 | hid_pkt->btn_left << 16;
 
@@ -380,7 +406,7 @@ static void jc_parse_wired_hid(joycon_ctxt_t *jc, const u8* packet, u32 size)
 			jc_hid_in_pair_data_t *pair_data = (jc_hid_in_pair_data_t *)spi_info->data;
 
 			// Check if we reply is pairing info.
-			if (spi_info->addr == 0x2000 && spi_info->size == 0x1A && pair_data->magic == 0x95)
+			if (spi_info->size == 0x1A && pair_data->magic == 0x95 && pair_data->size == 0x22)
 			{
 				bt_conn->type = jc->type;
 
@@ -416,6 +442,7 @@ static void jc_uart_pkt_parse(joycon_ctxt_t *jc, const u8* packet, size_t size)
 	jc_wired_hdr_t *pkt = (jc_wired_hdr_t *)packet;
 	switch (pkt->cmd)
 	{
+	case JC_HORI_INPUT_RPT_CMD:
 	case JC_WIRED_HID:
 		jc_parse_wired_hid(jc, pkt->payload, (pkt->data[0] << 8) | pkt->data[1]);
 		break;
@@ -439,7 +466,7 @@ static void jc_rcv_pkt(joycon_ctxt_t *jc)
 	if ((uart_irq & 0x8) != 0x8)
 		return;
 
-	u32 len = uart_recv(jc->uart, (u8 *)jc->buf, 0);
+	u32 len = uart_recv(jc->uart, (u8 *)jc->buf, 0x100);
 
 	// Check valid size and uart reply magic.
 	if (len > 7 && !memcmp(jc->buf, "\x19\x81\x03", 3))
@@ -478,10 +505,15 @@ static bool jc_send_init_rumble(joycon_ctxt_t *jc)
 
 static void jc_req_nx_pad_status(joycon_ctxt_t *jc)
 {
-	bool sent_rumble = jc_send_init_rumble(jc);
+	bool is_nxpad = !(jc->type & JC_ID_HORI);
 
-	if (sent_rumble)
-		return;
+	if (is_nxpad)
+	{
+		bool sent_rumble = jc_send_init_rumble(jc);
+
+		if (sent_rumble)
+			return;
+	}
 
 	if (jc->last_status_req_time > get_tmr_ms() || !jc->connected)
 		return;
@@ -492,7 +524,10 @@ static void jc_req_nx_pad_status(joycon_ctxt_t *jc)
 	else
 		gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);
 
-	joycon_send_raw(jc->uart, nx_pad_status, sizeof(nx_pad_status));
+	if (is_nxpad)
+		joycon_send_raw(jc->uart, nx_pad_status, sizeof(nx_pad_status));
+	else
+		joycon_send_raw(jc->uart, hori_pad_status, sizeof(hori_pad_status));
 
 	// Turn Joy-Con detect on.
 	if (jc->uart == UART_B)
@@ -503,11 +538,34 @@ static void jc_req_nx_pad_status(joycon_ctxt_t *jc)
 	jc->last_status_req_time = get_tmr_ms() + 15;
 }
 
-jc_gamepad_rpt_t *jc_get_bt_pairing_info()
+static bool _jc_validate_pairing_info(u8 *buf, bool *is_hos)
+{
+	u8 crc = 0;
+	for (u32 i = 0; i < 0x22; i++)
+		crc += buf[4 + i];
+
+	crc += 0x68; // Host is Switch.
+
+	if ((crc ^ 0x55) == buf[2])
+		*is_hos = true;
+
+	crc -= 0x68;
+	crc += 0x08; // Host is PC.
+
+	if (*is_hos || (crc ^ 0x55) == buf[2])
+		return true;
+
+	return false;
+}
+
+jc_gamepad_rpt_t *jc_get_bt_pairing_info(bool *is_l_hos, bool *is_r_hos)
 {
 	u8 retries;
 	jc_bt_conn_t *bt_conn;
 
+	if (!jc_init_done)
+		return NULL;
+
 	bt_conn = &jc_gamepad.bt_conn_l;
 	memset(bt_conn->host_mac, 0, 6);
 	memset(bt_conn->ltk, 0, 16);
@@ -522,9 +580,13 @@ jc_gamepad_rpt_t *jc_get_bt_pairing_info()
 		jc_rcv_pkt(&jc_l);
 	}
 
-	jc_hid_in_spi_read_t subcmd_data;
-	subcmd_data.addr = 0x2000;
-	subcmd_data.size = 0x1A;
+	jc_hid_in_spi_read_t subcmd_data_l;
+	subcmd_data_l.addr = 0x2000;
+	subcmd_data_l.size = 0x1A;
+
+	jc_hid_in_spi_read_t subcmd_data_r;
+	subcmd_data_r.addr = 0x2000;
+	subcmd_data_r.size = 0x1A;
 
 	// Turn off Joy-Con detect.
 	gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
@@ -533,46 +595,94 @@ jc_gamepad_rpt_t *jc_get_bt_pairing_info()
 	bool jc_r_found = jc_r.connected ? false : true;
 	bool jc_l_found = jc_l.connected ? false : true;
 
-	u32 total_retries = 5;
+	u32 total_retries = 10;
 retry:
 	retries = 10;
 	while (retries)
 	{
-		if (jc_l.last_status_req_time < get_tmr_ms())
+		u32 time_now = get_tmr_ms();
+		if ((!jc_l_found && jc_l.last_status_req_time < time_now) || (!jc_r_found && jc_r.last_status_req_time < time_now))
 		{
-			jc_send_hid_cmd(0, JC_HID_SUBCMD_SPI_READ, (u8 *)&subcmd_data, 5);
-			jc_l.last_status_req_time = get_tmr_ms() + 15;
-			jc_r.last_status_req_time = get_tmr_ms() + 15;
-			retries--;
-		}
+			if (!jc_l_found)
+			{
+				jc_send_hid_cmd(jc_l.uart, JC_HID_SUBCMD_SPI_READ, (u8 *)&subcmd_data_l, 5);
+				jc_l.last_status_req_time = get_tmr_ms() + 15;
+			}
 
-		if (!jc_r_found)
-		{
-			memset(jc_r.buf, 0, 0x100);
-			jc_rcv_pkt(&jc_r);
+			if (!jc_r_found)
+			{
+				jc_send_hid_cmd(jc_r.uart, JC_HID_SUBCMD_SPI_READ, (u8 *)&subcmd_data_r, 5);
+				jc_r.last_status_req_time = get_tmr_ms() + 15;
+			}
+
+			retries--;
 		}
 
 		if (!jc_l_found)
 		{
 			memset(jc_l.buf, 0, 0x100);
 			jc_rcv_pkt(&jc_l);
+
+			bool is_hos = false;
+			if (_jc_validate_pairing_info(&jc_l.buf[SPI_READ_OFFSET], &is_hos))
+			{
+				bool is_active = jc_l.buf[SPI_READ_OFFSET] == 0x95;
+
+				if (!is_active)
+					subcmd_data_l.addr += 0x26; // Get next slot.
+				else
+					jc_l_found = true; // Entry is active.
+
+				if (jc_l_found && is_hos)
+					*is_l_hos = true;
+			}
 		}
+
+		if (!jc_r_found)
+		{
+			memset(jc_r.buf, 0, 0x100);
+			jc_rcv_pkt(&jc_r);
+
+			bool is_hos = false;
+			if (_jc_validate_pairing_info(&jc_r.buf[SPI_READ_OFFSET], &is_hos))
+			{
+				bool is_active = jc_r.buf[SPI_READ_OFFSET] == 0x95;
+
+				if (!is_active)
+					subcmd_data_r.addr += 0x26; // Get next slot.
+				else
+					jc_r_found = true; // Entry is active.
+
+				if (jc_r_found && is_hos)
+					*is_r_hos = true;
+			}
+		}
+
+		if (jc_l_found && jc_r_found)
+			break;
 	}
 
-	if (jc_l.connected &&
-		memcmp(&jc_gamepad.bt_conn_l.ltk[0], "\x00\x00\x00\x00", 4) &&
-		memcmp(&jc_gamepad.bt_conn_l.ltk[8], "\x00\x00\x00\x00", 4))
-		jc_l_found = true;
-
-	if (jc_r.connected &&
-		memcmp(&jc_gamepad.bt_conn_r.ltk[0], "\x00\x00\x00\x00", 4) &&
-		memcmp(&jc_gamepad.bt_conn_r.ltk[8], "\x00\x00\x00\x00", 4))
-		jc_r_found = true;
-
-	if (total_retries && (!jc_l_found || !jc_r_found))
+	if (!jc_l_found || !jc_r_found)
 	{
-		total_retries--;
-		goto retry;
+		if (total_retries)
+		{
+			total_retries--;
+			goto retry;
+		}
+
+		if (!jc_l_found)
+		{
+			bt_conn = &jc_gamepad.bt_conn_l;
+			memset(bt_conn->host_mac, 0, 6);
+			memset(bt_conn->ltk, 0, 16);
+		}
+
+		if (!jc_r_found)
+		{
+			bt_conn = &jc_gamepad.bt_conn_r;
+			memset(bt_conn->host_mac, 0, 6);
+			memset(bt_conn->ltk, 0, 16);
+		}
 	}
 
 	// Turn Joy-Con detect on.
@@ -589,16 +699,14 @@ void jc_deinit()
 
 	u8 data = HCI_STATE_SLEEP;
 
-	if (jc_r.connected)
+	if (jc_r.connected && !(jc_r.type & JC_ID_HORI))
 	{
 		jc_send_hid_cmd(UART_B, JC_HID_SUBCMD_HCI_STATE, &data, 1);
-		msleep(1);
 		jc_rcv_pkt(&jc_r);
 	}
-	if (jc_l.connected)
+	if (jc_l.connected && !(jc_l.type & JC_ID_HORI))
 	{
 		jc_send_hid_cmd(UART_C, JC_HID_SUBCMD_HCI_STATE, &data, 1);
-		msleep(1);
 		jc_rcv_pkt(&jc_l);
 	}
 
@@ -640,9 +748,12 @@ static void jc_init_conn(joycon_ctxt_t *jc)
 		msleep(5);
 		jc_rcv_pkt(jc);
 
-		joycon_send_raw(jc->uart, init_finilize, sizeof(init_finilize));
-		msleep(5);
-		jc_rcv_pkt(jc);
+		if (!(jc->type & JC_ID_HORI))
+		{
+			joycon_send_raw(jc->uart, init_finalize, sizeof(init_finalize));
+			msleep(5);
+			jc_rcv_pkt(jc);
+		}
 
 		// Turn Joy-Con detect on.
 		if (jc->uart == UART_B)
@@ -697,10 +808,10 @@ void jc_power_supply(u8 uart, bool enable)
 {
 	if (enable)
 	{
-		if (regulator_get_5v_dev_enabled(1 << uart))
+		if (regulator_5v_get_dev_enabled(1 << uart))
 			return;
 
-		regulator_enable_5v(1 << uart);
+		regulator_5v_enable(1 << uart);
 
 		if (jc_init_done)
 		{
@@ -730,10 +841,10 @@ void jc_power_supply(u8 uart, bool enable)
 	}
 	else
 	{
-		if (!regulator_get_5v_dev_enabled(1 << uart))
+		if (!regulator_5v_get_dev_enabled(1 << uart))
 			return;
 
-		regulator_disable_5v(1 << uart);
+		regulator_5v_disable(1 << uart);
 
 		if (uart == UART_C)
 			gpio_write(GPIO_PORT_CC, GPIO_PIN_3, GPIO_LOW);
@@ -747,7 +858,10 @@ void jc_init_hw()
 	jc_l.uart = UART_C;
 	jc_r.uart = UART_B;
 
-#if (LV_LOG_PRINTF != 1)
+#if !defined(DEBUG_UART_PORT) || !(DEBUG_UART_PORT)
+	if (fuse_read_hw_type() == FUSE_NX_HW_TYPE_HOAG)
+		return;
+
 	jc_power_supply(UART_C, true);
 	jc_power_supply(UART_B, true);
 

bdk/input/joycon.h

@@ -19,7 +19,7 @@
 #ifndef __JOYCON_H_
 #define __JOYCON_H_
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 #define JC_BTNS_DIRECTION_PAD 0xF0000
 #define JC_BTNS_PREV_NEXT     0x800080
@@ -93,6 +93,6 @@ void jc_power_supply(u8 uart, bool enable);
 void jc_init_hw();
 void jc_deinit();
 jc_gamepad_rpt_t *joycon_poll();
-jc_gamepad_rpt_t *jc_get_bt_pairing_info();
+jc_gamepad_rpt_t *jc_get_bt_pairing_info(bool *is_l_hos, bool *is_r_hos);
 
 #endif

bdk/input/touch.c

@@ -19,21 +19,30 @@
 
 #include <string.h>
 
-#include "../soc/clock.h"
-#include "../soc/i2c.h"
-#include "../soc/pinmux.h"
-#include "../power/max7762x.h"
-#include "../power/max77620.h"
-#include "../soc/gpio.h"
-#include "../soc/t210.h"
-#include "../utils/btn.h"
-#include "../utils/util.h"
+#include <soc/clock.h>
+#include <soc/i2c.h>
+#include <soc/pinmux.h>
+#include <power/max7762x.h>
+#include <soc/gpio.h>
+#include <soc/t210.h>
+#include <utils/btn.h>
+#include <utils/util.h>
 #include "touch.h"
 
 
-#include "../gfx/gfx.h"
+#include <gfx_utils.h>
 #define DPRINTF(...) gfx_printf(__VA_ARGS__)
 
+static touch_panel_info_t _panels[] =
+{
+	{  0,  1, 1, 1,  "NISSHA NFT-K12D" },
+	{  1,  0, 1, 1,  "GiS GGM6 B2X"    },
+	{  2,  0, 0, 0,  "NISSHA NBF-K9A"  },
+	{  3,  1, 0, 0,  "GiS 5.5\""       },
+	{  4,  0, 0, 1,  "Unknown"         },
+	{ -1,  1, 0, 1,  "GiS VA 6.2\""    }
+};
+
 static int touch_command(u8 cmd, u8 *buf, u8 size)
 {
 	int res = i2c_send_buf_small(I2C_3, STMFTS_I2C_ADDR, cmd, buf, size);
@@ -53,7 +62,7 @@ static int touch_read_reg(u8 *cmd, u32 csize, u8 *buf, u32 size)
 	return 0;
 }
 
-static int touch_wait_event(u8 event, u8 status, u32 timeout)
+static int touch_wait_event(u8 event, u8 status, u32 timeout, u8 *buf)
 {
 	u32 timer = get_tmr_ms() + timeout;
 	while (true)
@@ -61,7 +70,11 @@ static int touch_wait_event(u8 event, u8 status, u32 timeout)
 		u8 tmp[8] = {0};
 		i2c_recv_buf_small(tmp, 8, I2C_3, STMFTS_I2C_ADDR, STMFTS_READ_ONE_EVENT);
 		if (tmp[1] == event && tmp[2] == status)
+		{
+			if (buf)
+				memcpy(buf, &tmp[3], 5);
 			return 0;
+		}
 
 		if (get_tmr_ms() > timer)
 			return 1;
@@ -147,10 +160,10 @@ static void _touch_parse_event(touch_event *event)
 			event->type = STMFTS_EV_MULTI_TOUCH_LEAVE;
 	}
 
-	// gfx_con_setpos(&gfx_con, 0, 300);
+	// gfx_con_setpos(0, 300);
 	// DPRINTF("x = %d    \ny = %d    \nz = %d  \n", event->x, event->y, event->z);
-	// DPRINTF("0 = %02X\n1 = %02x\n2 = %02x\n3 = %02x\n", event->raw[0], event->raw[1], event->raw[2], event->raw[3]);
-	// DPRINTF("4 = %02X\n5 = %02x\n6 = %02x\n7 = %02x\n", event->raw[4], event->raw[5], event->raw[6], event->raw[7]);
+	// DPRINTF("0 = %02X\n1 = %02X\n2 = %02X\n3 = %02X\n", event->raw[0], event->raw[1], event->raw[2], event->raw[3]);
+	// DPRINTF("4 = %02X\n5 = %02X\n6 = %02X\n7 = %02X\n", event->raw[4], event->raw[5], event->raw[6], event->raw[7]);
 }
 
 void touch_poll(touch_event *event)
@@ -183,12 +196,33 @@ touch_info touch_get_info()
 	info.config_id = buf[4];
 	info.config_ver = buf[5];
 
-	//DPRINTF("ID: %04X, FW Ver: %d.%02d\nCfg ID: %02x, Cfg Ver: %d\n",
+	//DPRINTF("ID: %04X, FW Ver: %d.%02d\nCfg ID: %02X, Cfg Ver: %d\n",
 	//	info.chip_id, info.fw_ver >> 8, info.fw_ver & 0xFF, info.config_id, info.config_ver);
 
 	return info;
 }
 
+touch_panel_info_t *touch_get_panel_vendor()
+{
+	u8 buf[5] = {0};
+	u8 cmd = STMFTS_VENDOR_GPIO_STATE;
+
+	if (touch_command(STMFTS_VENDOR, &cmd, 1))
+		return NULL;
+
+	if (touch_wait_event(STMFTS_EV_VENDOR, STMFTS_VENDOR_GPIO_STATE, 2000, buf))
+		return NULL;
+
+	for (u32 i = 0; i < ARRAY_SIZE(_panels); i++)
+	{
+		touch_panel_info_t *panel = &_panels[i];
+		if (buf[0] == panel->gpio0 && buf[1] == panel->gpio1 && buf[2] == panel->gpio2)
+			return panel;
+	}
+
+	return NULL;
+}
+
 int touch_get_fw_info(touch_fw_info_t *fw)
 {
 	u8 buf[8] = {0};
@@ -227,7 +261,7 @@ int touch_sys_reset()
 			continue;
 		}
 		msleep(10);
-		if (touch_wait_event(STMFTS_EV_CONTROLLER_READY, 0, 20))
+		if (touch_wait_event(STMFTS_EV_CONTROLLER_READY, 0, 20, NULL))
 			continue;
 		else
 			return 0;
@@ -301,9 +335,9 @@ int touch_get_fb_info(u8 *buf)
 
 int touch_sense_enable()
 {
-	// Enable auto tuning calibration and multi-touch sensing.
-	u8 cmd = 1;
-	if (touch_command(STMFTS_AUTO_CALIBRATION, &cmd, 1))
+	// Switch sense mode and enable multi-touch sensing.
+	u8 cmd = STMFTS_FINGER_MODE;
+	if (touch_command(STMFTS_SWITCH_SENSE_MODE, &cmd, 1))
 		return 0;
 
 	if (touch_command(STMFTS_MS_MT_SENSE_ON, NULL, 0))
@@ -329,19 +363,19 @@ int touch_execute_autotune()
 	// Apply Mutual Sense Compensation tuning.
 	if (touch_command(STMFTS_MS_CX_TUNING, NULL, 0))
 		return 0;
-	if (touch_wait_event(STMFTS_EV_STATUS, STMFTS_EV_STATUS_MS_CX_TUNING_DONE, 2000))
+	if (touch_wait_event(STMFTS_EV_STATUS, STMFTS_EV_STATUS_MS_CX_TUNING_DONE, 2000, NULL))
 		return 0;
 
 	// Apply Self Sense Compensation tuning.
 	if (touch_command(STMFTS_SS_CX_TUNING, NULL, 0))
 		return 0;
-	if (touch_wait_event(STMFTS_EV_STATUS, STMFTS_EV_STATUS_SS_CX_TUNING_DONE, 2000))
+	if (touch_wait_event(STMFTS_EV_STATUS, STMFTS_EV_STATUS_SS_CX_TUNING_DONE, 2000, NULL))
 		return 0;
 
 	// Save Compensation data to EEPROM.
 	if (touch_command(STMFTS_SAVE_CX_TUNING, NULL, 0))
 		return 0;
-	if (touch_wait_event(STMFTS_EV_STATUS, STMFTS_EV_STATUS_WRITE_CX_TUNE_DONE, 2000))
+	if (touch_wait_event(STMFTS_EV_STATUS, STMFTS_EV_STATUS_WRITE_CX_TUNE_DONE, 2000, NULL))
 		return 0;
 
 	return touch_sense_enable();
@@ -358,10 +392,9 @@ static int touch_init()
 
 int touch_power_on()
 {
-	// Enables LDO6 for touchscreen VDD/AVDD supply
-	max77620_regulator_set_volt_and_flags(REGULATOR_LDO6, 2900000, MAX77620_POWER_MODE_NORMAL);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_LDO6_CFG2,
-		MAX77620_LDO_CFG2_ADE_ENABLE | (3 << 3) | (MAX77620_POWER_MODE_NORMAL << MAX77620_LDO_POWER_MODE_SHIFT));
+	// Enable LDO6 for touchscreen VDD/AVDD supply.
+	max7762x_regulator_set_voltage(REGULATOR_LDO6, 2900000);
+	max7762x_regulator_enable(REGULATOR_LDO6, true);
 
 	// Configure touchscreen GPIO.
 	PINMUX_AUX(PINMUX_AUX_DAP4_SCLK) = PINMUX_PULL_DOWN | 1;
@@ -385,7 +418,7 @@ int touch_power_on()
 	i2c_init(I2C_3);
 
 	// Wait for the touchscreen module to get ready.
-	touch_wait_event(STMFTS_EV_CONTROLLER_READY, 0, 20);
+	touch_wait_event(STMFTS_EV_CONTROLLER_READY, 0, 20, NULL);
 
 	// Check for forced boot time calibration.
 	if (btn_read_vol() == (BTN_VOL_UP | BTN_VOL_DOWN))
@@ -414,9 +447,7 @@ void touch_power_off()
 	gpio_write(GPIO_PORT_J, GPIO_PIN_7, GPIO_LOW);
 
 	// Disables LDO6 for touchscreen VDD, AVDD supply
-	max77620_regulator_enable(REGULATOR_LDO6, 0);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_LDO6_CFG2,
-		MAX77620_LDO_CFG2_ADE_ENABLE | (2 << 3) | (MAX77620_POWER_MODE_NORMAL << MAX77620_LDO_POWER_MODE_SHIFT));
+	max7762x_regulator_enable(REGULATOR_LDO6, false);
 
 	clock_disable_i2c(I2C_3);
 }

bdk/input/touch.h

@@ -20,7 +20,7 @@
 #ifndef __TOUCH_H_
 #define __TOUCH_H_
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 #define STMFTS_I2C_ADDR 0x49
 
@@ -47,19 +47,26 @@
 #define STMFTS_ITO_CHECK               0xA7
 #define STMFTS_RELEASEINFO             0xAA
 #define STMFTS_WRITE_REG               0xB6
-#define STMFTS_AUTO_CALIBRATION        0xC3
+#define STMFTS_SWITCH_SENSE_MODE       0xC3
 #define STMFTS_NOISE_WRITE             0xC7
 #define STMFTS_NOISE_READ              0xC8
 #define STMFTS_RW_FRAMEBUFFER_REG      0xD0
 #define STMFTS_SAVE_CX_TUNING          0xFC
 
-#define STMFTS_UNK0 0xB8 //Request compensation
-#define STMFTS_UNK1 0xCF
-#define STMFTS_UNK2 0xF7
-#define STMFTS_UNK3 0xFA
-#define STMFTS_UNK4 0xF9
+#define STMFTS_REQU_COMP_DATA          0xB8
+#define STMFTS_VENDOR                  0xCF
+#define STMFTS_FLASH_UNLOCK            0xF7
+#define STMFTS_FLASH_WRITE_64K         0xF8
+#define STMFTS_FLASH_STATUS            0xF9
+#define STMFTS_FLASH_OP                0xFA
 #define STMFTS_UNK5 0x62
 
+/* cmd parameters */
+#define STMFTS_VENDOR_GPIO_STATE       0x01
+#define STMFTS_VENDOR_SENSE_MODE       0x02
+#define STMFTS_STYLUS_MODE             0x00
+#define STMFTS_FINGER_MODE             0x01
+#define STMFTS_HOVER_MODE              0x02
 
 /* events */
 #define STMFTS_EV_NO_EVENT             0x00
@@ -74,6 +81,7 @@
 #define STMFTS_EV_ERROR                0x0f
 #define STMFTS_EV_NOISE_READ           0x17
 #define STMFTS_EV_NOISE_WRITE          0x18
+#define STMFTS_EV_VENDOR               0x20
 
 #define STMFTS_EV_CONTROLLER_READY     0x10
 #define STMFTS_EV_STATUS               0x16
@@ -131,6 +139,15 @@ typedef struct _touch_event {
 	bool touch;
 } touch_event;
 
+typedef struct _touch_panel_info_t
+{
+	u8 idx;
+	u8 gpio0;
+	u8 gpio1;
+	u8 gpio2;
+	char *vendor;
+} touch_panel_info_t;
+
 typedef struct _touch_info {
 	u16 chip_id;
 	u16 fw_ver;
@@ -146,6 +163,7 @@ typedef struct _touch_fw_info_t {
 
 void touch_poll(touch_event *event);
 touch_event touch_poll_wait();
+touch_panel_info_t *touch_get_panel_vendor();
 int touch_get_fw_info(touch_fw_info_t *fw);
 touch_info touch_get_info();
 int touch_panel_ito_test(u8 *err);

bdk/libs/compr/blz.h

@@ -17,7 +17,7 @@
 #ifndef _BLZ_H_
 #define _BLZ_H_
 
-#include "../../utils/types.h"
+#include <utils/types.h>
 
 typedef struct _blz_footer
 {

bdk/libs/compr/lz.c

@@ -125,7 +125,7 @@ static int _LZ_ReadVarSize( unsigned int * x, const unsigned char * buf )
 *  insize  - Number of input bytes.
 *************************************************************************/
 
-void LZ_Uncompress( const unsigned char *in, unsigned char *out,
+unsigned int LZ_Uncompress( const unsigned char *in, unsigned char *out,
     unsigned int insize )
 {
     unsigned char marker, symbol;
@@ -134,7 +134,7 @@ void LZ_Uncompress( const unsigned char *in, unsigned char *out,
     /* Do we have anything to uncompress? */
     if( insize < 1 )
     {
-        return;
+        return 0;
     }
 
     /* Get marker symbol from input stream */
@@ -176,4 +176,6 @@ void LZ_Uncompress( const unsigned char *in, unsigned char *out,
         }
     }
     while( inpos < insize );
+
+    return outpos;
 }

bdk/libs/compr/lz.h

@@ -41,7 +41,7 @@ extern "C" {
 * Function prototypes
 *************************************************************************/
 
-void LZ_Uncompress( const unsigned char *in, unsigned char *out,
+unsigned int LZ_Uncompress( const unsigned char *in, unsigned char *out,
                     unsigned int insize );
 
 

bdk/libs/compr/lz4.h

@@ -0,0 +1,569 @@
+/*
+ *  LZ4 - Fast LZ compression algorithm
+ *  Header File
+ *  Copyright (C) 2011-2017, Yann Collet.
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+   You can contact the author at :
+    - LZ4 homepage : http://www.lz4.org
+    - LZ4 source repository : https://github.com/lz4/lz4
+*/
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+#ifndef LZ4_H_2983827168210
+#define LZ4_H_2983827168210
+
+/* --- Dependency --- */
+#include <stddef.h>   /* size_t */
+
+
+/**
+  Introduction
+
+  LZ4 is lossless compression algorithm, providing compression speed at 400 MB/s per core,
+  scalable with multi-cores CPU. It features an extremely fast decoder, with speed in
+  multiple GB/s per core, typically reaching RAM speed limits on multi-core systems.
+
+  The LZ4 compression library provides in-memory compression and decompression functions.
+  Compression can be done in:
+    - a single step (described as Simple Functions)
+    - a single step, reusing a context (described in Advanced Functions)
+    - unbounded multiple steps (described as Streaming compression)
+
+  lz4.h provides block compression functions. It gives full buffer control to user.
+  Decompressing an lz4-compressed block also requires metadata (such as compressed size).
+  Each application is free to encode such metadata in whichever way it wants.
+
+  An additional format, called LZ4 frame specification (doc/lz4_Frame_format.md),
+  take care of encoding standard metadata alongside LZ4-compressed blocks.
+  If your application requires interoperability, it's recommended to use it.
+  A library is provided to take care of it, see lz4frame.h.
+*/
+
+/*^***************************************************************
+*  Export parameters
+*****************************************************************/
+/*
+*  LZ4_DLL_EXPORT :
+*  Enable exporting of functions when building a Windows DLL
+*  LZ4LIB_VISIBILITY :
+*  Control library symbols visibility.
+*/
+#ifndef LZ4LIB_VISIBILITY
+#  if defined(__GNUC__) && (__GNUC__ >= 4)
+#    define LZ4LIB_VISIBILITY __attribute__ ((visibility ("default")))
+#  else
+#    define LZ4LIB_VISIBILITY
+#  endif
+#endif
+#if defined(LZ4_DLL_EXPORT) && (LZ4_DLL_EXPORT==1)
+#  define LZ4LIB_API __declspec(dllexport) LZ4LIB_VISIBILITY
+#elif defined(LZ4_DLL_IMPORT) && (LZ4_DLL_IMPORT==1)
+#  define LZ4LIB_API __declspec(dllimport) LZ4LIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define LZ4LIB_API LZ4LIB_VISIBILITY
+#endif
+
+/*------   Version   ------*/
+#define LZ4_VERSION_MAJOR    1    /* for breaking interface changes  */
+#define LZ4_VERSION_MINOR    8    /* for new (non-breaking) interface capabilities */
+#define LZ4_VERSION_RELEASE  2    /* for tweaks, bug-fixes, or development */
+
+#define LZ4_VERSION_NUMBER (LZ4_VERSION_MAJOR *100*100 + LZ4_VERSION_MINOR *100 + LZ4_VERSION_RELEASE)
+
+#define LZ4_LIB_VERSION LZ4_VERSION_MAJOR.LZ4_VERSION_MINOR.LZ4_VERSION_RELEASE
+#define LZ4_QUOTE(str) #str
+#define LZ4_EXPAND_AND_QUOTE(str) LZ4_QUOTE(str)
+#define LZ4_VERSION_STRING LZ4_EXPAND_AND_QUOTE(LZ4_LIB_VERSION)
+
+LZ4LIB_API int LZ4_versionNumber (void);  /**< library version number; useful to check dll version */
+LZ4LIB_API const char* LZ4_versionString (void);   /**< library version string; unseful to check dll version */
+
+
+/*-************************************
+*  Tuning parameter
+**************************************/
+/*!
+ * LZ4_MEMORY_USAGE :
+ * Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.)
+ * Increasing memory usage improves compression ratio
+ * Reduced memory usage may improve speed, thanks to cache effect
+ * Default value is 14, for 16KB, which nicely fits into Intel x86 L1 cache
+ */
+#ifndef LZ4_MEMORY_USAGE
+# define LZ4_MEMORY_USAGE 14
+#endif
+
+/*-************************************
+*  Simple Functions
+**************************************/
+/*! LZ4_compress_default() :
+    Compresses 'srcSize' bytes from buffer 'src'
+    into already allocated 'dst' buffer of size 'dstCapacity'.
+    Compression is guaranteed to succeed if 'dstCapacity' >= LZ4_compressBound(srcSize).
+    It also runs faster, so it's a recommended setting.
+    If the function cannot compress 'src' into a more limited 'dst' budget,
+    compression stops *immediately*, and the function result is zero.
+    Note : as a consequence, 'dst' content is not valid.
+    Note 2 : This function is protected against buffer overflow scenarios (never writes outside 'dst' buffer, nor read outside 'source' buffer).
+        srcSize : max supported value is LZ4_MAX_INPUT_SIZE.
+        dstCapacity : size of buffer 'dst' (which must be already allocated)
+        return  : the number of bytes written into buffer 'dst' (necessarily <= dstCapacity)
+                  or 0 if compression fails */
+LZ4LIB_API int LZ4_compress_default(const char* src, char* dst, int srcSize, int dstCapacity);
+
+/*! LZ4_decompress_safe() :
+    compressedSize : is the exact complete size of the compressed block.
+    dstCapacity : is the size of destination buffer, which must be already allocated.
+    return : the number of bytes decompressed into destination buffer (necessarily <= dstCapacity)
+             If destination buffer is not large enough, decoding will stop and output an error code (negative value).
+             If the source stream is detected malformed, the function will stop decoding and return a negative result.
+             This function is protected against malicious data packets.
+*/
+LZ4LIB_API int LZ4_decompress_safe (const char* src, char* dst, int compressedSize, int dstCapacity);
+
+
+/*-************************************
+*  Advanced Functions
+**************************************/
+#define LZ4_MAX_INPUT_SIZE        0x7E000000   /* 2 113 929 216 bytes */
+#define LZ4_COMPRESSBOUND(isize)  ((unsigned)(isize) > (unsigned)LZ4_MAX_INPUT_SIZE ? 0 : (isize) + ((isize)/255) + 16)
+
+/*!
+LZ4_compressBound() :
+    Provides the maximum size that LZ4 compression may output in a "worst case" scenario (input data not compressible)
+    This function is primarily useful for memory allocation purposes (destination buffer size).
+    Macro LZ4_COMPRESSBOUND() is also provided for compilation-time evaluation (stack memory allocation for example).
+    Note that LZ4_compress_default() compresses faster when dstCapacity is >= LZ4_compressBound(srcSize)
+        inputSize  : max supported value is LZ4_MAX_INPUT_SIZE
+        return : maximum output size in a "worst case" scenario
+              or 0, if input size is incorrect (too large or negative)
+*/
+LZ4LIB_API int LZ4_compressBound(int inputSize);
+
+/*!
+LZ4_compress_fast() :
+    Same as LZ4_compress_default(), but allows selection of "acceleration" factor.
+    The larger the acceleration value, the faster the algorithm, but also the lesser the compression.
+    It's a trade-off. It can be fine tuned, with each successive value providing roughly +~3% to speed.
+    An acceleration value of "1" is the same as regular LZ4_compress_default()
+    Values <= 0 will be replaced by ACCELERATION_DEFAULT (currently == 1, see lz4.c).
+*/
+LZ4LIB_API int LZ4_compress_fast (const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+
+/*!
+LZ4_compress_fast_extState() :
+    Same compression function, just using an externally allocated memory space to store compression state.
+    Use LZ4_sizeofState() to know how much memory must be allocated,
+    and allocate it on 8-bytes boundaries (using malloc() typically).
+    Then, provide it as 'void* state' to compression function.
+*/
+LZ4LIB_API int LZ4_sizeofState(void);
+LZ4LIB_API int LZ4_compress_fast_extState (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+
+/*!
+LZ4_compress_destSize() :
+    Reverse the logic : compresses as much data as possible from 'src' buffer
+    into already allocated buffer 'dst' of size 'targetDestSize'.
+    This function either compresses the entire 'src' content into 'dst' if it's large enough,
+    or fill 'dst' buffer completely with as much data as possible from 'src'.
+        *srcSizePtr : will be modified to indicate how many bytes where read from 'src' to fill 'dst'.
+                      New value is necessarily <= old value.
+        return : Nb bytes written into 'dst' (necessarily <= targetDestSize)
+                 or 0 if compression fails
+*/
+LZ4LIB_API int LZ4_compress_destSize (const char* src, char* dst, int* srcSizePtr, int targetDstSize);
+
+
+/*!
+LZ4_decompress_fast() : **unsafe!**
+This function is a bit faster than LZ4_decompress_safe(),
+but doesn't provide any security guarantee.
+    originalSize : is the uncompressed size to regenerate
+                   Destination buffer must be already allocated, and its size must be >= 'originalSize' bytes.
+    return : number of bytes read from source buffer (== compressed size).
+             If the source stream is detected malformed, the function stops decoding and return a negative result.
+    note : This function respects memory boundaries for *properly formed* compressed data.
+           However, it does not provide any protection against malicious input.
+           It also doesn't know 'src' size, and implies it's >= compressed size.
+           Use this function in trusted environment **only**.
+*/
+LZ4LIB_API int LZ4_decompress_fast (const char* src, char* dst, int originalSize);
+
+/*!
+LZ4_decompress_safe_partial() :
+    This function decompress a compressed block of size 'srcSize' at position 'src'
+    into destination buffer 'dst' of size 'dstCapacity'.
+    The function will decompress a minimum of 'targetOutputSize' bytes, and stop after that.
+    However, it's not accurate, and may write more than 'targetOutputSize' (but always <= dstCapacity).
+   @return : the number of bytes decoded in the destination buffer (necessarily <= dstCapacity)
+        Note : this number can also be < targetOutputSize, if compressed block contains less data.
+            Therefore, always control how many bytes were decoded.
+            If source stream is detected malformed, function returns a negative result.
+            This function is protected against malicious data packets.
+*/
+LZ4LIB_API int LZ4_decompress_safe_partial (const char* src, char* dst, int srcSize, int targetOutputSize, int dstCapacity);
+
+
+/*-*********************************************
+*  Streaming Compression Functions
+***********************************************/
+typedef union LZ4_stream_u LZ4_stream_t;  /* incomplete type (defined later) */
+
+/*! LZ4_createStream() and LZ4_freeStream() :
+ *  LZ4_createStream() will allocate and initialize an `LZ4_stream_t` structure.
+ *  LZ4_freeStream() releases its memory.
+ */
+LZ4LIB_API LZ4_stream_t* LZ4_createStream(void);
+LZ4LIB_API int           LZ4_freeStream (LZ4_stream_t* streamPtr);
+
+/*! LZ4_resetStream() :
+ *  An LZ4_stream_t structure can be allocated once and re-used multiple times.
+ *  Use this function to start compressing a new stream.
+ */
+LZ4LIB_API void LZ4_resetStream (LZ4_stream_t* streamPtr);
+
+/*! LZ4_loadDict() :
+ *  Use this function to load a static dictionary into LZ4_stream_t.
+ *  Any previous data will be forgotten, only 'dictionary' will remain in memory.
+ *  Loading a size of 0 is allowed, and is the same as reset.
+ * @return : dictionary size, in bytes (necessarily <= 64 KB)
+ */
+LZ4LIB_API int LZ4_loadDict (LZ4_stream_t* streamPtr, const char* dictionary, int dictSize);
+
+/*! LZ4_compress_fast_continue() :
+ *  Compress 'src' content using data from previously compressed blocks, for better compression ratio.
+ *  'dst' buffer must be already allocated.
+ *  If dstCapacity >= LZ4_compressBound(srcSize), compression is guaranteed to succeed, and runs faster.
+ *
+ *  Important : The previous 64KB of compressed data is assumed to remain present and unmodified in memory!
+ *
+ *  Special 1 : When input is a double-buffer, they can have any size, including < 64 KB.
+ *              Make sure that buffers are separated by at least one byte.
+ *              This way, each block only depends on previous block.
+ *  Special 2 : If input buffer is a ring-buffer, it can have any size, including < 64 KB.
+ *
+ * @return : size of compressed block
+ *           or 0 if there is an error (typically, cannot fit into 'dst').
+ *  After an error, the stream status is invalid, it can only be reset or freed.
+ */
+LZ4LIB_API int LZ4_compress_fast_continue (LZ4_stream_t* streamPtr, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+/*! LZ4_saveDict() :
+ *  If last 64KB data cannot be guaranteed to remain available at its current memory location,
+ *  save it into a safer place (char* safeBuffer).
+ *  This is schematically equivalent to a memcpy() followed by LZ4_loadDict(),
+ *  but is much faster, because LZ4_saveDict() doesn't need to rebuild tables.
+ * @return : saved dictionary size in bytes (necessarily <= maxDictSize), or 0 if error.
+ */
+LZ4LIB_API int LZ4_saveDict (LZ4_stream_t* streamPtr, char* safeBuffer, int maxDictSize);
+
+
+/*-**********************************************
+*  Streaming Decompression Functions
+*  Bufferless synchronous API
+************************************************/
+typedef union LZ4_streamDecode_u LZ4_streamDecode_t;   /* incomplete type (defined later) */
+
+/*! LZ4_createStreamDecode() and LZ4_freeStreamDecode() :
+ *  creation / destruction of streaming decompression tracking structure.
+ *  A tracking structure can be re-used multiple times sequentially. */
+LZ4LIB_API LZ4_streamDecode_t* LZ4_createStreamDecode(void);
+LZ4LIB_API int                 LZ4_freeStreamDecode (LZ4_streamDecode_t* LZ4_stream);
+
+/*! LZ4_setStreamDecode() :
+ *  An LZ4_streamDecode_t structure can be allocated once and re-used multiple times.
+ *  Use this function to start decompression of a new stream of blocks.
+ *  A dictionary can optionnally be set. Use NULL or size 0 for a reset order.
+ * @return : 1 if OK, 0 if error
+ */
+LZ4LIB_API int LZ4_setStreamDecode (LZ4_streamDecode_t* LZ4_streamDecode, const char* dictionary, int dictSize);
+
+/*! LZ4_decompress_*_continue() :
+ *  These decoding functions allow decompression of consecutive blocks in "streaming" mode.
+ *  A block is an unsplittable entity, it must be presented entirely to a decompression function.
+ *  Decompression functions only accept one block at a time.
+ *  The last 64KB of previously decoded data *must* remain available and unmodified at the memory position where they were decoded.
+ *  If less than 64KB of data has been decoded all the data must be present.
+ *
+ *  Special : if application sets a ring buffer for decompression, it must respect one of the following conditions :
+ *  - Exactly same size as encoding buffer, with same update rule (block boundaries at same positions)
+ *    In which case, the decoding & encoding ring buffer can have any size, including very small ones ( < 64 KB).
+ *  - Larger than encoding buffer, by a minimum of maxBlockSize more bytes.
+ *    maxBlockSize is implementation dependent. It's the maximum size of any single block.
+ *    In which case, encoding and decoding buffers do not need to be synchronized,
+ *    and encoding ring buffer can have any size, including small ones ( < 64 KB).
+ *  - _At least_ 64 KB + 8 bytes + maxBlockSize.
+ *    In which case, encoding and decoding buffers do not need to be synchronized,
+ *    and encoding ring buffer can have any size, including larger than decoding buffer.
+ *  Whenever these conditions are not possible, save the last 64KB of decoded data into a safe buffer,
+ *  and indicate where it is saved using LZ4_setStreamDecode() before decompressing next block.
+*/
+LZ4LIB_API int LZ4_decompress_safe_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int srcSize, int dstCapacity);
+LZ4LIB_API int LZ4_decompress_fast_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int originalSize);
+
+
+/*! LZ4_decompress_*_usingDict() :
+ *  These decoding functions work the same as
+ *  a combination of LZ4_setStreamDecode() followed by LZ4_decompress_*_continue()
+ *  They are stand-alone, and don't need an LZ4_streamDecode_t structure.
+ */
+LZ4LIB_API int LZ4_decompress_safe_usingDict (const char* src, char* dst, int srcSize, int dstCapcity, const char* dictStart, int dictSize);
+LZ4LIB_API int LZ4_decompress_fast_usingDict (const char* src, char* dst, int originalSize, const char* dictStart, int dictSize);
+
+
+/*^**********************************************
+ * !!!!!!   STATIC LINKING ONLY   !!!!!!
+ ***********************************************/
+
+/*-************************************
+ *  Unstable declarations
+ **************************************
+ * Declarations in this section should be considered unstable.
+ * Use at your own peril, etc., etc.
+ * They may be removed in the future.
+ * Their signatures may change.
+ **************************************/
+
+#ifdef LZ4_STATIC_LINKING_ONLY
+
+/*! LZ4_resetStream_fast() :
+ *  When an LZ4_stream_t is known to be in a internally coherent state,
+ *  it can often be prepared for a new compression with almost no work, only
+ *  sometimes falling back to the full, expensive reset that is always required
+ *  when the stream is in an indeterminate state (i.e., the reset performed by
+ *  LZ4_resetStream()).
+ *
+ *  LZ4_streams are guaranteed to be in a valid state when:
+ *  - returned from LZ4_createStream()
+ *  - reset by LZ4_resetStream()
+ *  - memset(stream, 0, sizeof(LZ4_stream_t))
+ *  - the stream was in a valid state and was reset by LZ4_resetStream_fast()
+ *  - the stream was in a valid state and was then used in any compression call
+ *    that returned success
+ *  - the stream was in an indeterminate state and was used in a compression
+ *    call that fully reset the state (LZ4_compress_fast_extState()) and that
+ *    returned success
+ */
+LZ4LIB_API void LZ4_resetStream_fast (LZ4_stream_t* streamPtr);
+
+/*! LZ4_compress_fast_extState_fastReset() :
+ *  A variant of LZ4_compress_fast_extState().
+ *
+ *  Using this variant avoids an expensive initialization step. It is only safe
+ *  to call if the state buffer is known to be correctly initialized already
+ *  (see above comment on LZ4_resetStream_fast() for a definition of "correctly
+ *  initialized"). From a high level, the difference is that this function
+ *  initializes the provided state with a call to LZ4_resetStream_fast() while
+ *  LZ4_compress_fast_extState() starts with a call to LZ4_resetStream().
+ */
+LZ4LIB_API int LZ4_compress_fast_extState_fastReset (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+/*! LZ4_attach_dictionary() :
+ *  This is an experimental API that allows for the efficient use of a
+ *  static dictionary many times.
+ *
+ *  Rather than re-loading the dictionary buffer into a working context before
+ *  each compression, or copying a pre-loaded dictionary's LZ4_stream_t into a
+ *  working LZ4_stream_t, this function introduces a no-copy setup mechanism,
+ *  in which the working stream references the dictionary stream in-place.
+ *
+ *  Several assumptions are made about the state of the dictionary stream.
+ *  Currently, only streams which have been prepared by LZ4_loadDict() should
+ *  be expected to work.
+ *
+ *  Alternatively, the provided dictionary stream pointer may be NULL, in which
+ *  case any existing dictionary stream is unset.
+ *
+ *  If a dictionary is provided, it replaces any pre-existing stream history.
+ *  The dictionary contents are the only history that can be referenced and
+ *  logically immediately precede the data compressed in the first subsequent
+ *  compression call.
+ *
+ *  The dictionary will only remain attached to the working stream through the
+ *  first compression call, at the end of which it is cleared. The dictionary
+ *  stream (and source buffer) must remain in-place / accessible / unchanged
+ *  through the completion of the first compression call on the stream.
+ */
+LZ4LIB_API void LZ4_attach_dictionary(LZ4_stream_t *working_stream, const LZ4_stream_t *dictionary_stream);
+
+#endif
+
+/*-************************************
+ *  Private definitions
+ **************************************
+ * Do not use these definitions.
+ * They are exposed to allow static allocation of `LZ4_stream_t` and `LZ4_streamDecode_t`.
+ * Using these definitions will expose code to API and/or ABI break in future versions of the library.
+ **************************************/
+#define LZ4_HASHLOG   (LZ4_MEMORY_USAGE-2)
+#define LZ4_HASHTABLESIZE (1 << LZ4_MEMORY_USAGE)
+#define LZ4_HASH_SIZE_U32 (1 << LZ4_HASHLOG)       /* required as macro for static allocation */
+
+#if defined(__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */)
+#include <stdint.h>
+
+typedef struct LZ4_stream_t_internal LZ4_stream_t_internal;
+struct LZ4_stream_t_internal {
+    uint32_t hashTable[LZ4_HASH_SIZE_U32];
+    uint32_t currentOffset;
+    uint16_t initCheck;
+    uint16_t tableType;
+    const uint8_t* dictionary;
+    const LZ4_stream_t_internal* dictCtx;
+    uint32_t dictSize;
+};
+
+typedef struct {
+    const uint8_t* externalDict;
+    size_t extDictSize;
+    const uint8_t* prefixEnd;
+    size_t prefixSize;
+} LZ4_streamDecode_t_internal;
+
+#else
+
+typedef struct LZ4_stream_t_internal LZ4_stream_t_internal;
+struct LZ4_stream_t_internal {
+    unsigned int hashTable[LZ4_HASH_SIZE_U32];
+    unsigned int currentOffset;
+    unsigned short initCheck;
+    unsigned short tableType;
+    const unsigned char* dictionary;
+    const LZ4_stream_t_internal* dictCtx;
+    unsigned int dictSize;
+};
+
+typedef struct {
+    const unsigned char* externalDict;
+    size_t extDictSize;
+    const unsigned char* prefixEnd;
+    size_t prefixSize;
+} LZ4_streamDecode_t_internal;
+
+#endif
+
+/*!
+ * LZ4_stream_t :
+ * information structure to track an LZ4 stream.
+ * init this structure before first use.
+ * note : only use in association with static linking !
+ *        this definition is not API/ABI safe,
+ *        it may change in a future version !
+ */
+#define LZ4_STREAMSIZE_U64 ((1 << (LZ4_MEMORY_USAGE-3)) + 4)
+#define LZ4_STREAMSIZE     (LZ4_STREAMSIZE_U64 * sizeof(unsigned long long))
+union LZ4_stream_u {
+    unsigned long long table[LZ4_STREAMSIZE_U64];
+    LZ4_stream_t_internal internal_donotuse;
+} ;  /* previously typedef'd to LZ4_stream_t */
+
+
+/*!
+ * LZ4_streamDecode_t :
+ * information structure to track an LZ4 stream during decompression.
+ * init this structure  using LZ4_setStreamDecode (or memset()) before first use
+ * note : only use in association with static linking !
+ *        this definition is not API/ABI safe,
+ *        and may change in a future version !
+ */
+#define LZ4_STREAMDECODESIZE_U64  4
+#define LZ4_STREAMDECODESIZE     (LZ4_STREAMDECODESIZE_U64 * sizeof(unsigned long long))
+union LZ4_streamDecode_u {
+    unsigned long long table[LZ4_STREAMDECODESIZE_U64];
+    LZ4_streamDecode_t_internal internal_donotuse;
+} ;   /* previously typedef'd to LZ4_streamDecode_t */
+
+
+/*-************************************
+*  Obsolete Functions
+**************************************/
+
+/*! Deprecation warnings
+   Should deprecation warnings be a problem,
+   it is generally possible to disable them,
+   typically with -Wno-deprecated-declarations for gcc
+   or _CRT_SECURE_NO_WARNINGS in Visual.
+   Otherwise, it's also possible to define LZ4_DISABLE_DEPRECATE_WARNINGS */
+#ifdef LZ4_DISABLE_DEPRECATE_WARNINGS
+#  define LZ4_DEPRECATED(message)   /* disable deprecation warnings */
+#else
+#  define LZ4_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__)
+#  if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */
+#    define LZ4_DEPRECATED(message) [[deprecated(message)]]
+#  elif (LZ4_GCC_VERSION >= 405) || defined(__clang__)
+#    define LZ4_DEPRECATED(message) __attribute__((deprecated(message)))
+#  elif (LZ4_GCC_VERSION >= 301)
+#    define LZ4_DEPRECATED(message) __attribute__((deprecated))
+#  elif defined(_MSC_VER)
+#    define LZ4_DEPRECATED(message) __declspec(deprecated(message))
+#  else
+#    pragma message("WARNING: You need to implement LZ4_DEPRECATED for this compiler")
+#    define LZ4_DEPRECATED(message)
+#  endif
+#endif /* LZ4_DISABLE_DEPRECATE_WARNINGS */
+
+/* Obsolete compression functions */
+LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress               (const char* source, char* dest, int sourceSize);
+LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress_limitedOutput (const char* source, char* dest, int sourceSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_withState               (void* state, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_continue                (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_limitedOutput_continue  (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize, int maxOutputSize);
+
+/* Obsolete decompression functions */
+LZ4_DEPRECATED("use LZ4_decompress_fast() instead") LZ4LIB_API int LZ4_uncompress (const char* source, char* dest, int outputSize);
+LZ4_DEPRECATED("use LZ4_decompress_safe() instead") LZ4LIB_API int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize);
+
+/* Obsolete streaming functions; degraded functionality; do not use!
+ *
+ * In order to perform streaming compression, these functions depended on data
+ * that is no longer tracked in the state. They have been preserved as well as
+ * possible: using them will still produce a correct output. However, they don't
+ * actually retain any history between compression calls. The compression ratio
+ * achieved will therefore be no better than compressing each chunk
+ * independently.
+ */
+LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API void* LZ4_create (char* inputBuffer);
+LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API int   LZ4_sizeofStreamState(void);
+LZ4_DEPRECATED("Use LZ4_resetStream() instead") LZ4LIB_API  int   LZ4_resetStreamState(void* state, char* inputBuffer);
+LZ4_DEPRECATED("Use LZ4_saveDict() instead") LZ4LIB_API     char* LZ4_slideInputBuffer (void* state);
+
+/* Obsolete streaming decoding functions */
+LZ4_DEPRECATED("use LZ4_decompress_safe_usingDict() instead") LZ4LIB_API int LZ4_decompress_safe_withPrefix64k (const char* src, char* dst, int compressedSize, int maxDstSize);
+LZ4_DEPRECATED("use LZ4_decompress_fast_usingDict() instead") LZ4LIB_API int LZ4_decompress_fast_withPrefix64k (const char* src, char* dst, int originalSize);
+
+#endif /* LZ4_H_2983827168210 */
+
+
+#if defined (__cplusplus)
+}
+#endif

bdk/libs/fatfs/diskio.h

@@ -9,7 +9,7 @@
 extern "C" {
 #endif
 
-#include "../../utils/types.h"
+#include <utils/types.h>
 
 /* Status of Disk Functions */
 typedef BYTE	DSTATUS;

bdk/libs/fatfs/ff.c

@@ -38,7 +38,7 @@
 
 #include "ff.h"			/* Declarations of FatFs API */
 #include "diskio.h"		/* Declarations of device I/O functions */
-#include "../../gfx/gfx.h"
+#include <gfx_utils.h>
 
 #define EFSPRINTF(text, ...) print_error(); gfx_printf("%k"text"%k\n", 0xFFFFFF00, 0xFFFFFFFF);
 //#define EFSPRINTF(...)
@@ -3906,11 +3906,11 @@ FRESULT f_read (
 
 
 
-#ifdef FF_FASTFS
+#if FF_FASTFS && FF_USE_FASTSEEK
 /*-----------------------------------------------------------------------*/
 /* Fast Read Aligned Sized File Without a Cache                         */
 /*-----------------------------------------------------------------------*/
-#if FF_USE_FASTSEEK
+
 FRESULT f_read_fast (
 	FIL* fp,			/* Pointer to the file object */
 	const void* buff,	/* Pointer to the data to be written */
@@ -3988,7 +3988,6 @@ FRESULT f_read_fast (
 	LEAVE_FF(fs, FR_OK);
 }
 #endif
-#endif
 
 
 
@@ -4132,11 +4131,11 @@ FRESULT f_write (
 
 
 
-#ifdef FF_FASTFS
+#if FF_FASTFS && FF_USE_FASTSEEK
 /*-----------------------------------------------------------------------*/
 /* Fast Write Aligned Sized File Without a Cache                         */
 /*-----------------------------------------------------------------------*/
-#if FF_USE_FASTSEEK
+
 FRESULT f_write_fast (
 	FIL* fp,			/* Pointer to the file object */
 	const void* buff,	/* Pointer to the data to be written */
@@ -4219,7 +4218,6 @@ FRESULT f_write_fast (
 	LEAVE_FF(fs, FR_OK);
 }
 #endif
-#endif
 
 
 
@@ -4680,8 +4678,7 @@ FRESULT f_lseek (
 
 
 
-#ifdef FF_FASTFS
-#if FF_USE_FASTSEEK
+#if FF_FASTFS && FF_USE_FASTSEEK
 /*-----------------------------------------------------------------------*/
 /* Seek File Read/Write Pointer                                          */
 /*-----------------------------------------------------------------------*/
@@ -4708,7 +4705,6 @@ DWORD *f_expand_cltbl (
 	return fp->cltbl;
 }
 #endif
-#endif
 
 
 

bdk/libs/fatfs/ff.h

@@ -26,8 +26,8 @@
 extern "C" {
 #endif
 
-#include "../../utils/types.h"	/* Basic integer types */
-#include "ffconf.h"		/* FatFs configuration options */
+#include <utils/types.h>	/* Basic integer types */
+#include <fatfs_cfg.h>	/* FatFs configuration options */
 
 #if FF_DEFINED != FFCONF_DEF
 #error Wrong configuration file (ffconf.h).
@@ -246,7 +246,7 @@ typedef enum {
 	FR_LOCKED,				/* (16) The operation is rejected according to the file sharing policy */
 	FR_NOT_ENOUGH_CORE,		/* (17) LFN working buffer could not be allocated */
 	FR_TOO_MANY_OPEN_FILES,	/* (18) Number of open files > FF_FS_LOCK */
-#ifdef FF_FASTFS
+#if FF_FASTFS
 	FR_INVALID_PARAMETER,	/* (19) Given parameter is invalid */
 	FR_CLTBL_NO_INIT	    /* (20) The cluster table for fast seek/read/write was not created */
 #else
@@ -263,10 +263,8 @@ FRESULT f_open (FIL* fp, const TCHAR* path, BYTE mode);				/* Open or create a f
 FRESULT f_close (FIL* fp);											/* Close an open file object */
 FRESULT f_read (FIL* fp, void* buff, UINT btr, UINT* br);			/* Read data from the file */
 FRESULT f_write (FIL* fp, const void* buff, UINT btw, UINT* bw);	/* Write data to the file */
-#ifdef FF_FASTFS
 FRESULT f_read_fast (FIL* fp, const void* buff, UINT btr);			/* Fast read data from the file */
 FRESULT f_write_fast (FIL* fp, const void* buff, UINT btw);         /* Fast write data to the file */
-#endif
 FRESULT f_lseek (FIL* fp, FSIZE_t ofs);								/* Move file pointer of the file object */
 FRESULT f_truncate (FIL* fp);										/* Truncate the file */
 FRESULT f_sync (FIL* fp);											/* Flush cached data of the writing file */
@@ -288,9 +286,7 @@ FRESULT f_getfree (const TCHAR* path, DWORD* nclst, FATFS** fatfs);	/* Get numbe
 FRESULT f_getlabel (const TCHAR* path, TCHAR* label, DWORD* vsn);	/* Get volume label */
 FRESULT f_setlabel (const TCHAR* label);							/* Set volume label */
 FRESULT f_forward (FIL* fp, UINT(*func)(const BYTE*,UINT), UINT btf, UINT* bf);	/* Forward data to the stream */
-#ifdef FF_FASTFS
 DWORD  *f_expand_cltbl (FIL* fp, UINT tblsz, FSIZE_t ofs);			/* Expand file and populate cluster table */
-#endif
 FRESULT f_expand (FIL* fp, FSIZE_t fsz, BYTE opt);					/* Allocate a contiguous block to the file */
 FRESULT f_mount (FATFS* fs, const TCHAR* path, BYTE opt);			/* Mount/Unmount a logical drive */
 FRESULT f_mkfs (const TCHAR* path, BYTE opt, DWORD au, void* work, UINT len);	/* Create a FAT volume */

bdk/libs/lv_conf.h

@@ -17,8 +17,8 @@
 #ifndef LV_CONF_H
 #define LV_CONF_H
 
-#include "../utils/types.h"
-#include "../../../common/memory_map.h"
+#include <utils/types.h>
+#include <memory_map.h>
 /*===================
    Dynamic memory
  *===================*/
@@ -32,7 +32,7 @@
 #  define LV_MEM_ADR          NYX_LV_MEM_ADR /*Set an address for memory pool instead of allocation it as an array. Can be in external SRAM too.*/
 #  define LV_MEM_AUTO_DEFRAG  1              /*Automatically defrag on free*/
 #else       /*LV_MEM_CUSTOM*/
-#  define LV_MEM_CUSTOM_INCLUDE "../../../mem/heap.h"   /*Header for the dynamic memory function*/
+#  define LV_MEM_CUSTOM_INCLUDE <mem/heap.h> /*Header for the dynamic memory function*/
 #  define LV_MEM_CUSTOM_ALLOC   malloc       /*Wrapper to malloc*/
 #  define LV_MEM_CUSTOM_FREE    free         /*Wrapper to free*/
 #endif     /*LV_MEM_CUSTOM*/
@@ -149,13 +149,17 @@
 /*HAL settings*/
 #define LV_TICK_CUSTOM               1                       /*1: use a custom tick source (removing the need to manually update the tick with `lv_tick_inc`) */
 #if LV_TICK_CUSTOM == 1
-#define LV_TICK_CUSTOM_INCLUDE       "../../../utils/util.h" /*Header for the sys time function*/
+#define LV_TICK_CUSTOM_INCLUDE       <utils/util.h>          /*Header for the sys time function*/
 #define LV_TICK_CUSTOM_SYS_TIME_EXPR (get_tmr_ms())          /*Expression evaluating to current systime in ms*/
 #endif     /*LV_TICK_CUSTOM*/
 
 
 /*Log settings*/
-#define USE_LV_LOG        0   /*Enable/disable the log module*/
+#ifdef DEBUG_UART_LV_LOG
+#  define USE_LV_LOG        1   /*Enable/disable the log module*/
+#else
+#  define USE_LV_LOG        0   /*Enable/disable the log module*/
+#endif
 #if USE_LV_LOG
 /* How important log should be added:
  * LV_LOG_LEVEL_TRACE       A lot of logs to give detailed information

bdk/libs/lvgl/lv_core/lv_indev.c

@@ -357,7 +357,10 @@ static void indev_pointer_proc(lv_indev_t * i, lv_indev_data_t * data)
     if(i->cursor != NULL &&
             (i->proc.last_point.x != data->point.x ||
              i->proc.last_point.y != data->point.y)) {
-        lv_obj_set_pos(i->cursor, data->point.x, data->point.y);
+        /*Use cursor's center as pointer*/
+        uint32_t off_x = lv_obj_get_width(i->cursor) >> 1;
+        uint32_t off_y = lv_obj_get_height(i->cursor) >> 1;
+        lv_obj_set_pos(i->cursor, data->point.x - off_x, data->point.y - off_y);
     }
 
     i->proc.act_point.x = data->point.x;

bdk/libs/lvgl/lv_fonts/hekate_symbol_120.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_HEKATE_SYMBOL_120 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/hekate_symbol_20.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_HEKATE_SYMBOL_20 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/hekate_symbol_30.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_HEKATE_SYMBOL_30 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/interui_20.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_INTERUI_20 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/interui_30.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_INTERUI_30 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/ubuntu_mono.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_UBUNTU_MONO != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_hal/lv_hal_indev.h

@@ -17,7 +17,7 @@ extern "C" {
  *********************/
 #include <stdint.h>
 #include "lv_hal.h"
-#include "../../../utils/types.h"
+#include <utils/types.h>
 #include "../lv_misc/lv_area.h"
 #include "../lv_core/lv_obj.h"
 

bdk/libs/lvgl/lv_misc/lv_area.h

@@ -15,7 +15,7 @@ extern "C" {
  *      INCLUDES
  *********************/
 #include <string.h>
-#include "../../../utils/types.h"
+#include <utils/types.h>
 
 /*********************
  *      DEFINES

bdk/libs/lvgl/lv_misc/lv_circ.h

@@ -16,7 +16,7 @@ extern "C" {
  *********************/
 #include <stddef.h>
 #include "lv_area.h"
-#include "../../../utils/types.h"
+#include <utils/types.h>
 
 /*********************
  *      DEFINES