Bump hekate to v5.3.0 and Nyx to v0.9.2

BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.

Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.

Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.

This is just the start and it will continue to improve.

Makefile

@@ -16,7 +16,10 @@ TARGET := hekate
 BUILDDIR := build
 OUTPUTDIR := output
 SOURCEDIR = bootloader
+BDKDIR := bdk
+BDKINC := -I./$(BDKDIR)
 VPATH = $(dir ./$(SOURCEDIR)/) $(dir $(wildcard ./$(SOURCEDIR)/*/)) $(dir $(wildcard ./$(SOURCEDIR)/*/*/))
+VPATH += $(dir $(wildcard ./$(BDKDIR)/*/)) $(dir $(wildcard ./$(BDKDIR)/*/*/))
 
 # Main and graphics.
 OBJS = $(addprefix $(BUILDDIR)/$(TARGET)/, \
@@ -28,7 +31,7 @@ OBJS = $(addprefix $(BUILDDIR)/$(TARGET)/, \
 
 # Hardware.
 OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
-	bpmp.o clock.o cluster.o di.o gpio.o i2c.o irq.o mc.o sdram.o \
+	bpmp.o ccplex.o clock.o di.o gpio.o i2c.o irq.o mc.o sdram.o \
 	pinmux.o se.o smmu.o tsec.o uart.o \
 	fuse.o kfuse.o minerva.o \
 	sdmmc.o sdmmc_driver.o emummc.o nx_emmc.o nx_sd.o \
@@ -54,12 +57,15 @@ OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
 	elfload.o elfreloc_arm.o \
 )
 
+GFX_INC   := '"../$(SOURCEDIR)/gfx/gfx.h"'
+FFCFG_INC := '"../$(SOURCEDIR)/libs/fatfs/ffconf.h"'
+
 ################################################################################
 
 CUSTOMDEFINES := -DIPL_LOAD_ADDR=$(IPL_LOAD_ADDR) -DBL_MAGIC=$(IPL_MAGIC)
 CUSTOMDEFINES += -DBL_VER_MJ=$(BLVERSION_MAJOR) -DBL_VER_MN=$(BLVERSION_MINOR) -DBL_VER_HF=$(BLVERSION_HOTFX) -DBL_RESERVED=$(BLVERSION_RSVD)
 CUSTOMDEFINES += -DNYX_VER_MJ=$(NYXVERSION_MAJOR) -DNYX_VER_MN=$(NYXVERSION_MINOR) -DNYX_VER_HF=$(NYXVERSION_HOTFX) -DNYX_RESERVED=$(NYXVERSION_RSVD)
-#CUSTOMDEFINES += -DMENU_LOGO_ENABLE
+CUSTOMDEFINES += -DGFX_INC=$(GFX_INC) -DFFCFG_INC=$(FFCFG_INC)
 
 # 0: UART_A, 1: UART_B.
 #CUSTOMDEFINES += -DDEBUG_UART_PORT=0
@@ -67,7 +73,7 @@ CUSTOMDEFINES += -DNYX_VER_MJ=$(NYXVERSION_MAJOR) -DNYX_VER_MN=$(NYXVERSION_MINO
 #CUSTOMDEFINES += -DDEBUG
 
 ARCH := -march=armv4t -mtune=arm7tdmi -mthumb -mthumb-interwork
-CFLAGS = $(ARCH) -O2 -nostdlib -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-inline -std=gnu11 -Wall $(CUSTOMDEFINES)
+CFLAGS = $(ARCH) -O2 -g -nostdlib -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-inline -std=gnu11 -Wall $(CUSTOMDEFINES)
 LDFLAGS = $(ARCH) -nostartfiles -lgcc -Wl,--nmagic,--gc-sections -Xlinker --defsym=IPL_LOAD_ADDR=$(IPL_LOAD_ADDR)
 
 MODULEDIRS := $(wildcard modules/*)
@@ -90,23 +96,26 @@ clean:
 	@rm -rf $(OUTPUTDIR)
 
 $(MODULEDIRS):
-	$(MAKE) -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
+	@$(MAKE) -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
 
 $(NYXDIR):
-	$(MAKE) -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
+	@$(MAKE) -C $@ $(MAKECMDGOALS) -$(MAKEFLAGS)
 
 $(TARGET).bin: $(BUILDDIR)/$(TARGET)/$(TARGET).elf $(MODULEDIRS) $(NYXDIR)
 	$(OBJCOPY) -S -O binary $< $(OUTPUTDIR)/$@
 	@printf ICTC49 >> $(OUTPUTDIR)/$@
 
 $(BUILDDIR)/$(TARGET)/$(TARGET).elf: $(OBJS)
-	$(CC) $(LDFLAGS) -T $(SOURCEDIR)/link.ld $^ -o $@
+	@$(CC) $(LDFLAGS) -T $(SOURCEDIR)/link.ld $^ -o $@
+	@echo "hekate was built with the following flags:\nCFLAGS:  "$(CFLAGS)"\nLDFLAGS: "$(LDFLAGS)
 
 $(BUILDDIR)/$(TARGET)/%.o: %.c
-	$(CC) $(CFLAGS) -c $< -o $@
+	@echo Building $@
+	@$(CC) $(CFLAGS) $(BDKINC) -c $< -o $@
 
 $(BUILDDIR)/$(TARGET)/%.o: %.S
-	$(CC) $(CFLAGS) -c $< -o $@
+	@echo Building $@
+	@$(CC) $(CFLAGS) -c $< -o $@
 
 $(OBJS): $(BUILDDIR)/$(TARGET)
 

README.md

@@ -1,9 +1,9 @@
-# hekate - CTCaer mod
+# hekate - Nyx
 
 ![Image of Hekate](https://user-images.githubusercontent.com/3665130/60391760-bc1e8c00-9afe-11e9-8b7a-b065873081b2.png)
 
 
-Custom Nintendo Switch bootloader, firmware patcher, and more.
+Custom Graphical Nintendo Switch bootloader, firmware patcher, tools, and many more.
 
 
 ## Bootloader folders and files
@@ -30,7 +30,7 @@ Custom Nintendo Switch bootloader, firmware patcher, and more.
 | bootloader/screenshots/  | Folder where Nyx screenshots are saved                                |
 | bootloader/payloads/     | For payloads. 'Payloads...' menu. Autoboot only supported by including them into an ini. All CFW bootloaders, tools, Linux payloads are supported. |
 | bootloader/libtools/     | Future reserved                                                       |
-| sept                     | Sept folder. This must be always get updated via the Atmosphère release zip. Needed for tools and booting HOS on 7.0.0 and up. Unused for booting HOS if `fss0=` key is defined. |
+| sept                     | Sept folder. This must always get updated via the Atmosphère release zip. Needed for tools and booting HOS on 7.0.0 and up. Unused for booting HOS if `fss0=` key is defined. |
 
 **Note**: Sept files for booting 7.0.0 and up are expected at /sept folder at root of sd card.
 
@@ -87,7 +87,7 @@ You can find a template [Here](./res/hekate_ipl_template.ini)
 | atmosphere=1           | Enables Atmosphère patching.                               |
 | emupath={SD folder}    | Forces emuMMC to use the selected one. (=emuMMC/RAW1, =emuMMC/SD00, etc). emuMMC must be created by hekate because it uses the raw_based/file_based files. |
 | emummcforce=1          | Forces the use of emuMMC. If emummc.ini is disabled or not found, then it causes an error. |
-| emummc_force_disable=1 | Disables emuMMC if it's enabled.                           |
+| emummc_force_disable=1 | Disables emuMMC, if it's enabled.                           |
 | stock=1                | Disables unneeded kernel patching when running stock or semi-stock. `If emuMMC is enabled, emummc_force_disabled=1` is required. emuMMC is not supported on stock. If additional KIPs are needed other than OFW's, you can define them with `kip1` key. No kip should be used that relies on Atmosphère patching, because it will hang. If `NOGC` is needed, use `kip1patch=nogc`. |
 | id=idname              | Identifies boot entry for forced boot via id. Max 7 chars. |
 | payload={SD path}      | Payload launching. Tools, Linux, CFW bootloaders, etc.     |
@@ -120,11 +120,12 @@ hekate has a boot storage in the binary that helps it configure it outside of BP
 
 | Offset / Name           | Description                                                       |
 | ----------------------- | ----------------------------------------------------------------- |
-| '0x94' boot_cfg         | bit0: `Force AutoBoot`, bit1: `Show launch log`, bit2: Boot from ID, bit3: `Boot to emuMMC`, bit7: `sept run`. |
+| '0x94' boot_cfg         | bit0: `Force AutoBoot`, bit1: `Show launch log`, bit2: `Boot from ID`, bit3: `Boot to emuMMC`, bit6: `Boot to UMS`, bit7: `sept run`. |
 | '0x95' autoboot         | If `Force AutoBoot`: 0: Force go to menu, else boot that entry.   |
 | '0x96' autoboot_list    | If `Force AutoBoot` and `autoboot` then it boots from ini folder. |
 | '0x97' extra_cfg        | bit7: Force Nyx to run `Dump pkg1/2`.                             |
 | '0x98' xt_str[128]      | Depends on the set cfg bits.                                      |
+| '0x98' ums[1]           | When `Boot to UMS` is set, it will launch the selected UMS. 0: SD, 1: eMMC BOOT0, 2: eMMC BOOT1, 3: eMMC GPP, 4: emuMMC BOOT0, 5: emuMMC BOOT1, 6: emuMMC GPP,  |
 | '0x98' id[8]            | When `Boot from ID` is set, it will search all inis automatically and find the boot entry with that id and boot it. Must be NULL terminated. |
 | '0xA0' emummc_path[120] | When `Boot to emuMMC` is set, it will override the current emuMMC (boot entry or emummc.ini). Must be NULL terminated. |
 

Versions.inc

@@ -1,11 +1,11 @@
 # IPL Version.
 BLVERSION_MAJOR := 5
-BLVERSION_MINOR := 2
-BLVERSION_HOTFX := 1
+BLVERSION_MINOR := 3
+BLVERSION_HOTFX := 0
 BLVERSION_RSVD := 0
 
 # Nyx Version.
 NYXVERSION_MAJOR := 0
 NYXVERSION_MINOR := 9
-NYXVERSION_HOTFX := 1
+NYXVERSION_HOTFX := 2
 NYXVERSION_RSVD := 0

bdk/fatfs_cfg.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2020 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,11 +14,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef _CLUSTER_H_
-#define _CLUSTER_H_
+#ifndef _FATFS_CFG_H_
+#define _FATFS_CFG_H_
 
-#include "../utils/types.h"
-
-void cluster_boot_cpu0(u32 entry);
+#ifdef FFCFG_INC
+#include FFCFG_INC
+#endif
 
 #endif

bdk/gfx/di.c

@@ -18,16 +18,15 @@
 #include <string.h>
 
 #include "di.h"
-#include "../gfx/gfx.h"
-#include "../power/max77620.h"
-#include "../power/max7762x.h"
-#include "../soc/clock.h"
-#include "../soc/gpio.h"
-#include "../soc/i2c.h"
-#include "../soc/pinmux.h"
-#include "../soc/pmc.h"
-#include "../soc/t210.h"
-#include "../utils/util.h"
+#include <power/max77620.h>
+#include <power/max7762x.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <soc/i2c.h>
+#include <soc/pinmux.h>
+#include <soc/pmc.h>
+#include <soc/t210.h>
+#include <utils/util.h>
 
 #include "di.inl"
 
@@ -145,13 +144,13 @@ void display_init()
 	// Decode Display ID.
 	_display_id = ((_display_id >> 8) & 0xFF00) | (_display_id & 0xFF);
 
-	if ((_display_id & 0xFF) == PANEL_JDI_LPM062M)
-		_display_id = PANEL_JDI_LPM062M;
+	if ((_display_id & 0xFF) == PANEL_JDI_XXX062M)
+		_display_id = PANEL_JDI_XXX062M;
 
 	// Initialize display panel.
 	switch (_display_id)
 	{
-	case PANEL_JDI_LPM062M:
+	case PANEL_JDI_XXX062M:
 		exec_cfg((u32 *)DSI_BASE, _display_init_config_jdi, 43);
 		_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, MIPI_DCS_EXIT_SLEEP_MODE, 180000);
 		break;
@@ -264,7 +263,7 @@ void display_end()
 	// De-initialize display panel.
 	switch (_display_id)
 	{
-	case PANEL_JDI_LPM062M:
+	case PANEL_JDI_XXX062M:
 		exec_cfg((u32 *)DSI_BASE, _display_deinit_config_jdi, 22);
 		break;
 	case PANEL_AUO_A062TAN01:
@@ -338,9 +337,21 @@ void display_color_screen(u32 color)
 }
 
 u32 *display_init_framebuffer_pitch()
+{
+	// Sanitize framebuffer area.
+	memset((u32 *)IPL_FB_ADDRESS, 0, 0x3C0000);
+
+	// This configures the framebuffer @ IPL_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
+	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch, 32);
+	usleep(35000);
+
+	return (u32 *)IPL_FB_ADDRESS;
+}
+
+u32 *display_init_framebuffer_pitch_inv()
 {
 	// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
-	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch, 34);
+	exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch_inv, 34);
 
 	usleep(35000);
 

bdk/gfx/di.h

@@ -18,8 +18,8 @@
 #ifndef _DI_H_
 #define _DI_H_
 
-#include "../../../common/memory_map.h"
-#include "../utils/types.h"
+#include <memory_map.h>
+#include <utils/types.h>
 
 /*! Display registers. */
 #define _DIREG(reg) ((reg) * 4)
@@ -506,7 +506,7 @@
 
 enum
 {
-	PANEL_JDI_LPM062M     = 0x10,
+	PANEL_JDI_XXX062M     = 0x10,
 	PANEL_JDI_LAM062M109A = 0x0910,
 	PANEL_JDI_LPM062M326A = 0x2610,
 	PANEL_INL_P062CCA_AZ1 = 0x0F20,
@@ -528,6 +528,7 @@ void display_backlight_brightness(u32 brightness, u32 step_delay);
 
 /*! Init display in full 1280x720 resolution (B8G8R8A8, line stride 768, framebuffer size = 1280*768*4 bytes). */
 u32 *display_init_framebuffer_pitch();
+u32 *display_init_framebuffer_pitch_inv();
 u32 *display_init_framebuffer_block();
 u32 *display_init_framebuffer_log();
 void display_activate_console();

bdk/gfx/di.inl

@@ -559,8 +559,44 @@ static const cfg_op_t cfg_display_one_color[8] = {
 	{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY} // Continuous display.
 };
 
-//Display A config pitch.
-static const cfg_op_t cfg_display_framebuffer_pitch[34] = {
+//Display A config linear pitch.
+static const cfg_op_t cfg_display_framebuffer_pitch[32] = {
+	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, // NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8.
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_WIN_POSITION, 0}, //(0,0)
+	{DC_WIN_H_INITIAL_DDA, 0},
+	{DC_WIN_V_INITIAL_DDA, 0},
+	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(720 * 4)},
+	{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
+	{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
+	{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, // 720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
+	{DC_WIN_BUFFER_CONTROL, BUFFER_CONTROL_HOST},
+	{DC_WINBUF_SURFACE_KIND, PITCH},
+	{DC_WINBUF_START_ADDR, IPL_FB_ADDRESS}, // Framebuffer address.
+	{DC_WINBUF_ADDR_H_OFFSET, 0},
+	{DC_WINBUF_ADDR_V_OFFSET, 0},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_WIN_OPTIONS, 0},
+	{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
+	{DC_WIN_WIN_OPTIONS, WIN_ENABLE}, // Enable window AD.
+	{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, // Continuous display.
+	{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE},
+	{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
+};
+
+//Display A config linear pitch inverse + Win D support.
+static const cfg_op_t cfg_display_framebuffer_pitch_inv[34] = {
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_D_SELECT},
 	{DC_WIN_WIN_OPTIONS, 0},
 	{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
@@ -576,7 +612,7 @@ static const cfg_op_t cfg_display_framebuffer_pitch[34] = {
 	{DC_WIN_POSITION, 0}, //(0,0)
 	{DC_WIN_H_INITIAL_DDA, 0},
 	{DC_WIN_V_INITIAL_DDA, 0},
-	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)},
+	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(720 * 4)},
 	{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
 	{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
 	{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, // 720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
@@ -614,7 +650,7 @@ static const cfg_op_t cfg_display_framebuffer_block[34] = {
 	{DC_WIN_POSITION, 0}, //(0,0)
 	{DC_WIN_H_INITIAL_DDA, 0},
 	{DC_WIN_V_INITIAL_DDA, 0},
-	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)},
+	{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(720 * 4)},
 	{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
 	{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
 	{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(1280 * 2) | LINE_STRIDE(1280 * 4)}, //720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.

bdk/gfx_utils.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2020 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,6 +14,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "../utils/types.h"
+#ifndef _GFX_UTILS_H_
+#define _GFX_UTILS_H_
 
-char *dirlist(const char *directory, const char *pattern, bool includeHiddenFiles);
+#ifdef GFX_INC
+#include GFX_INC
+#endif
+
+#endif

bdk/ianos/elfload/elfload.h

@@ -22,10 +22,10 @@
 #include "elfarch.h"
 #include "elf.h"
 
-#include "../../utils/types.h"
+#include <utils/types.h>
 
 #ifdef DEBUG
-#include "../../gfx/gfx.h"
+#include <gfx_utils.h>
 #define EL_DEBUG(format, ...) \
 	gfx_printf(format __VA_OPT__(, ) __VA_ARGS__)
 #else

bdk/ianos/ianos.c

@@ -18,12 +18,13 @@
 #include <string.h>
 
 #include "ianos.h"
-#include "../../common/common_module.h"
-#include "../gfx/gfx.h"
-#include "../libs/elfload/elfload.h"
-#include "../mem/heap.h"
-#include "../storage/nx_sd.h"
-#include "../utils/types.h"
+#include "elfload/elfload.h"
+#include <module.h>
+#include <mem/heap.h>
+#include <storage/nx_sd.h>
+#include <utils/types.h>
+
+#include <gfx_utils.h>
 
 #define IRAM_LIB_ADDR 0x4002B000
 #define DRAM_LIB_ADDR 0xE0000000
@@ -36,8 +37,8 @@ void *fileBuf = NULL;
 static void _ianos_call_ep(moduleEntrypoint_t entrypoint, void *moduleConfig)
 {
 	bdkParams_t bdkParameters = (bdkParams_t)malloc(sizeof(struct _bdkParams_t));
-	bdkParameters->gfxCon = &gfx_con;
-	bdkParameters->gfxCtx = &gfx_ctxt;
+	bdkParameters->gfxCon = (void *)&gfx_con;
+	bdkParameters->gfxCtx = (void *)&gfx_ctxt;
 	bdkParameters->memcpy = (memcpy_t)&memcpy;
 	bdkParameters->memset = (memset_t)&memset;
 	bdkParameters->sharedHeap = &_heap;
@@ -63,26 +64,20 @@ static bool _ianos_read_cb(el_ctx *ctx, void *dest, size_t numberBytes, size_t o
 }
 
 //TODO: Support shared libraries.
-uintptr_t ianos_loader(bool sdmount, char *path, elfType_t type, void *moduleConfig)
+uintptr_t ianos_loader(char *path, elfType_t type, void *moduleConfig)
 {
+	el_ctx ctx;
 	uintptr_t epaddr = 0;
 
-	if (sdmount)
-	{
-		if (!sd_mount())
-			goto elfLoadFinalOut;
-	}
+	if (!sd_mount())
+		goto elfLoadFinalOut;
 
+	// Read library.
 	fileBuf = sd_file_read(path, NULL);
 
-	if (sdmount)
-		sd_unmount();
-
 	if (!fileBuf)
 		goto elfLoadFinalOut;
 
-
-	el_ctx ctx;
 	ctx.pread = _ianos_read_cb;
 
 	if (el_init(&ctx))
@@ -94,7 +89,6 @@ uintptr_t ianos_loader(bool sdmount, char *path, elfType_t type, void *moduleCon
 	case EXEC_ELF:
 	case AR64_ELF:
 		elfBuf = (void *)DRAM_LIB_ADDR;
-		sd_unmount();
 		break;
 	default:
 		elfBuf = malloc(ctx.memsz); // Aligned to 0x10 by default.
@@ -123,6 +117,5 @@ elfFreeOut:
 	fileBuf = NULL;
 
 elfLoadFinalOut:
-
 	return epaddr;
 }

bdk/ianos/ianos.h

@@ -18,7 +18,7 @@
 #ifndef IANOS_H
 #define IANOS_H
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 typedef enum
 {
@@ -29,6 +29,6 @@ typedef enum
 	KEEP_IN_RAM = (1 << 31)  // Shared library mask.
 } elfType_t;
 
-uintptr_t ianos_loader(bool sdmount, char *path, elfType_t type, void* config);
+uintptr_t ianos_loader(char *path, elfType_t type, void* config);
 
 #endif

bdk/input/als.c

@@ -17,11 +17,11 @@
  */
 
 #include "als.h"
-#include "../power/max77620.h"
-#include "../soc/clock.h"
-#include "../soc/i2c.h"
-#include "../soc/pinmux.h"
-#include "../utils/util.h"
+#include <power/max77620.h>
+#include <soc/clock.h>
+#include <soc/i2c.h>
+#include <soc/pinmux.h>
+#include <utils/util.h>
 
 #define HOS_GAIN  BH1730_GAIN_64X
 #define HOS_ITIME 38

bdk/input/als.h

@@ -19,7 +19,7 @@
 #ifndef __ALS_H_
 #define __ALS_H_
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 #define BH1730_I2C_ADDR 0x29
 

bdk/input/joycon.c

@@ -19,19 +19,19 @@
 #include <string.h>
 
 #include "joycon.h"
-#include "../gfx/gfx.h"
-#include "../power/max17050.h"
-#include "../power/regulator_5v.h"
-#include "../soc/bpmp.h"
-#include "../soc/clock.h"
-#include "../soc/gpio.h"
-#include "../soc/pinmux.h"
-#include "../soc/uart.h"
-#include "../soc/t210.h"
-#include "../utils/util.h"
+#include <gfx_utils.h>
+#include <power/max17050.h>
+#include <power/regulator_5v.h>
+#include <soc/bpmp.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <soc/pinmux.h>
+#include <soc/uart.h>
+#include <soc/t210.h>
+#include <utils/util.h>
 
 // For disabling driver when logging is enabled.
-#include "../libs/lvgl/lvgl.h"
+#include <libs/lv_conf.h>
 
 #define JC_WIRED_CMD        0x91
 #define JC_WIRED_HID        0x92
@@ -53,6 +53,7 @@
 #define  HCI_STATE_PAIR      0x02
 #define  HCI_STATE_HOME      0x04
 #define JC_HID_SUBCMD_SPI_READ   0x10
+#define  SPI_READ_OFFSET     0x20
 #define JC_HID_SUBCMD_RUMBLE_CTL 0x48
 #define JC_HID_SUBCMD_SND_RUMBLE 0xFF
 
@@ -309,13 +310,7 @@ void jc_send_hid_cmd(u8 uart, u8 subcmd, u8 *data, u16 size)
 
 		u8 pkt_size = sizeof(jc_hid_out_rpt_t) + size;
 
-		if (subcmd != JC_HID_SUBCMD_SPI_READ)
-			jc_send_hid_output_rpt(uart, (u8 *)hid_pkt, pkt_size);
-		else
-		{
-			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, pkt_size);
-			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, pkt_size);
-		}
+		jc_send_hid_output_rpt(uart, (u8 *)hid_pkt, pkt_size);
 	}
 }
 
@@ -380,7 +375,7 @@ static void jc_parse_wired_hid(joycon_ctxt_t *jc, const u8* packet, u32 size)
 			jc_hid_in_pair_data_t *pair_data = (jc_hid_in_pair_data_t *)spi_info->data;
 
 			// Check if we reply is pairing info.
-			if (spi_info->addr == 0x2000 && spi_info->size == 0x1A && pair_data->magic == 0x95)
+			if (spi_info->size == 0x1A && pair_data->magic == 0x95 && pair_data->size == 0x22)
 			{
 				bt_conn->type = jc->type;
 
@@ -439,7 +434,7 @@ static void jc_rcv_pkt(joycon_ctxt_t *jc)
 	if ((uart_irq & 0x8) != 0x8)
 		return;
 
-	u32 len = uart_recv(jc->uart, (u8 *)jc->buf, 0);
+	u32 len = uart_recv(jc->uart, (u8 *)jc->buf, 0x100);
 
 	// Check valid size and uart reply magic.
 	if (len > 7 && !memcmp(jc->buf, "\x19\x81\x03", 3))
@@ -503,7 +498,27 @@ static void jc_req_nx_pad_status(joycon_ctxt_t *jc)
 	jc->last_status_req_time = get_tmr_ms() + 15;
 }
 
-jc_gamepad_rpt_t *jc_get_bt_pairing_info()
+static bool _jc_validate_pairing_info(u8 *buf, bool *is_hos)
+{
+	u8 crc = 0;
+	for (u32 i = 0; i < 0x22; i++)
+		crc += buf[4 + i];
+
+	crc += 0x68; // Host is Switch.
+
+	if ((crc ^ 0x55) == buf[2])
+		*is_hos = true;
+
+	crc -= 0x68;
+	crc += 0x08; // Host is PC.
+
+	if (*is_hos || (crc ^ 0x55) == buf[2])
+		return true;
+
+	return false;
+}
+
+jc_gamepad_rpt_t *jc_get_bt_pairing_info(bool *is_l_hos, bool *is_r_hos)
 {
 	u8 retries;
 	jc_bt_conn_t *bt_conn;
@@ -522,9 +537,13 @@ jc_gamepad_rpt_t *jc_get_bt_pairing_info()
 		jc_rcv_pkt(&jc_l);
 	}
 
-	jc_hid_in_spi_read_t subcmd_data;
-	subcmd_data.addr = 0x2000;
-	subcmd_data.size = 0x1A;
+	jc_hid_in_spi_read_t subcmd_data_l;
+	subcmd_data_l.addr = 0x2000;
+	subcmd_data_l.size = 0x1A;
+
+	jc_hid_in_spi_read_t subcmd_data_r;
+	subcmd_data_r.addr = 0x2000;
+	subcmd_data_r.size = 0x1A;
 
 	// Turn off Joy-Con detect.
 	gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
@@ -533,46 +552,94 @@ jc_gamepad_rpt_t *jc_get_bt_pairing_info()
 	bool jc_r_found = jc_r.connected ? false : true;
 	bool jc_l_found = jc_l.connected ? false : true;
 
-	u32 total_retries = 5;
+	u32 total_retries = 10;
 retry:
 	retries = 10;
 	while (retries)
 	{
-		if (jc_l.last_status_req_time < get_tmr_ms())
+		u32 time_now = get_tmr_ms();
+		if ((!jc_l_found && jc_l.last_status_req_time < time_now) || (!jc_r_found && jc_r.last_status_req_time < time_now))
 		{
-			jc_send_hid_cmd(0, JC_HID_SUBCMD_SPI_READ, (u8 *)&subcmd_data, 5);
-			jc_l.last_status_req_time = get_tmr_ms() + 15;
-			jc_r.last_status_req_time = get_tmr_ms() + 15;
-			retries--;
-		}
+			if (!jc_l_found)
+			{
+				jc_send_hid_cmd(jc_l.uart, JC_HID_SUBCMD_SPI_READ, (u8 *)&subcmd_data_l, 5);
+				jc_l.last_status_req_time = get_tmr_ms() + 15;
+			}
 
-		if (!jc_r_found)
-		{
-			memset(jc_r.buf, 0, 0x100);
-			jc_rcv_pkt(&jc_r);
+			if (!jc_r_found)
+			{
+				jc_send_hid_cmd(jc_r.uart, JC_HID_SUBCMD_SPI_READ, (u8 *)&subcmd_data_r, 5);
+				jc_r.last_status_req_time = get_tmr_ms() + 15;
+			}
+
+			retries--;
 		}
 
 		if (!jc_l_found)
 		{
 			memset(jc_l.buf, 0, 0x100);
 			jc_rcv_pkt(&jc_l);
+
+			bool is_hos = false;
+			if (_jc_validate_pairing_info(&jc_l.buf[SPI_READ_OFFSET], &is_hos))
+			{
+				bool is_active = jc_l.buf[SPI_READ_OFFSET] == 0x95;
+
+				if (!is_active)
+					subcmd_data_l.addr += 0x26; // Get next slot.
+				else
+					jc_l_found = true; // Entry is active.
+
+				if (jc_l_found && is_hos)
+					*is_l_hos = true;
+			}
 		}
+
+		if (!jc_r_found)
+		{
+			memset(jc_r.buf, 0, 0x100);
+			jc_rcv_pkt(&jc_r);
+
+			bool is_hos = false;
+			if (_jc_validate_pairing_info(&jc_r.buf[SPI_READ_OFFSET], &is_hos))
+			{
+				bool is_active = jc_r.buf[SPI_READ_OFFSET] == 0x95;
+
+				if (!is_active)
+					subcmd_data_r.addr += 0x26; // Get next slot.
+				else
+					jc_r_found = true; // Entry is active.
+
+				if (jc_r_found && is_hos)
+					*is_r_hos = true;
+			}
+		}
+
+		if (jc_l_found && jc_r_found)
+			break;
 	}
 
-	if (jc_l.connected &&
-		memcmp(&jc_gamepad.bt_conn_l.ltk[0], "\x00\x00\x00\x00", 4) &&
-		memcmp(&jc_gamepad.bt_conn_l.ltk[8], "\x00\x00\x00\x00", 4))
-		jc_l_found = true;
-
-	if (jc_r.connected &&
-		memcmp(&jc_gamepad.bt_conn_r.ltk[0], "\x00\x00\x00\x00", 4) &&
-		memcmp(&jc_gamepad.bt_conn_r.ltk[8], "\x00\x00\x00\x00", 4))
-		jc_r_found = true;
-
-	if (total_retries && (!jc_l_found || !jc_r_found))
+	if (!jc_l_found || !jc_r_found)
 	{
-		total_retries--;
-		goto retry;
+		if (total_retries)
+		{
+			total_retries--;
+			goto retry;
+		}
+
+		if (!jc_l_found)
+		{
+			bt_conn = &jc_gamepad.bt_conn_l;
+			memset(bt_conn->host_mac, 0, 6);
+			memset(bt_conn->ltk, 0, 16);
+		}
+
+		if (!jc_r_found)
+		{
+			bt_conn = &jc_gamepad.bt_conn_r;
+			memset(bt_conn->host_mac, 0, 6);
+			memset(bt_conn->ltk, 0, 16);
+		}
 	}
 
 	// Turn Joy-Con detect on.
@@ -592,13 +659,11 @@ void jc_deinit()
 	if (jc_r.connected)
 	{
 		jc_send_hid_cmd(UART_B, JC_HID_SUBCMD_HCI_STATE, &data, 1);
-		msleep(1);
 		jc_rcv_pkt(&jc_r);
 	}
 	if (jc_l.connected)
 	{
 		jc_send_hid_cmd(UART_C, JC_HID_SUBCMD_HCI_STATE, &data, 1);
-		msleep(1);
 		jc_rcv_pkt(&jc_l);
 	}
 

bdk/input/joycon.h

@@ -19,7 +19,7 @@
 #ifndef __JOYCON_H_
 #define __JOYCON_H_
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 #define JC_BTNS_DIRECTION_PAD 0xF0000
 #define JC_BTNS_PREV_NEXT     0x800080
@@ -93,6 +93,6 @@ void jc_power_supply(u8 uart, bool enable);
 void jc_init_hw();
 void jc_deinit();
 jc_gamepad_rpt_t *joycon_poll();
-jc_gamepad_rpt_t *jc_get_bt_pairing_info();
+jc_gamepad_rpt_t *jc_get_bt_pairing_info(bool *is_l_hos, bool *is_r_hos);
 
 #endif

bdk/input/touch.c

@@ -19,19 +19,19 @@
 
 #include <string.h>
 
-#include "../soc/clock.h"
-#include "../soc/i2c.h"
-#include "../soc/pinmux.h"
-#include "../power/max7762x.h"
-#include "../power/max77620.h"
-#include "../soc/gpio.h"
-#include "../soc/t210.h"
-#include "../utils/btn.h"
-#include "../utils/util.h"
+#include <soc/clock.h>
+#include <soc/i2c.h>
+#include <soc/pinmux.h>
+#include <power/max7762x.h>
+#include <power/max77620.h>
+#include <soc/gpio.h>
+#include <soc/t210.h>
+#include <utils/btn.h>
+#include <utils/util.h>
 #include "touch.h"
 
 
-#include "../gfx/gfx.h"
+#include <gfx_utils.h>
 #define DPRINTF(...) gfx_printf(__VA_ARGS__)
 
 static int touch_command(u8 cmd, u8 *buf, u8 size)

bdk/input/touch.h

@@ -20,7 +20,7 @@
 #ifndef __TOUCH_H_
 #define __TOUCH_H_
 
-#include "../utils/types.h"
+#include <utils/types.h>
 
 #define STMFTS_I2C_ADDR 0x49
 

bdk/libs/compr/blz.h

@@ -17,7 +17,7 @@
 #ifndef _BLZ_H_
 #define _BLZ_H_
 
-#include "../../utils/types.h"
+#include <utils/types.h>
 
 typedef struct _blz_footer
 {

bdk/libs/fatfs/diskio.h

@@ -9,7 +9,7 @@
 extern "C" {
 #endif
 
-#include "../../utils/types.h"
+#include <utils/types.h>
 
 /* Status of Disk Functions */
 typedef BYTE	DSTATUS;

bdk/libs/fatfs/ff.c

@@ -38,7 +38,7 @@
 
 #include "ff.h"			/* Declarations of FatFs API */
 #include "diskio.h"		/* Declarations of device I/O functions */
-#include "../../gfx/gfx.h"
+#include <gfx_utils.h>
 
 #define EFSPRINTF(text, ...) print_error(); gfx_printf("%k"text"%k\n", 0xFFFFFF00, 0xFFFFFFFF);
 //#define EFSPRINTF(...)
@@ -3906,11 +3906,11 @@ FRESULT f_read (
 
 
 
-#ifdef FF_FASTFS
+#if FF_FASTFS && FF_USE_FASTSEEK
 /*-----------------------------------------------------------------------*/
 /* Fast Read Aligned Sized File Without a Cache                         */
 /*-----------------------------------------------------------------------*/
-#if FF_USE_FASTSEEK
+
 FRESULT f_read_fast (
 	FIL* fp,			/* Pointer to the file object */
 	const void* buff,	/* Pointer to the data to be written */
@@ -3988,7 +3988,6 @@ FRESULT f_read_fast (
 	LEAVE_FF(fs, FR_OK);
 }
 #endif
-#endif
 
 
 
@@ -4132,11 +4131,11 @@ FRESULT f_write (
 
 
 
-#ifdef FF_FASTFS
+#if FF_FASTFS && FF_USE_FASTSEEK
 /*-----------------------------------------------------------------------*/
 /* Fast Write Aligned Sized File Without a Cache                         */
 /*-----------------------------------------------------------------------*/
-#if FF_USE_FASTSEEK
+
 FRESULT f_write_fast (
 	FIL* fp,			/* Pointer to the file object */
 	const void* buff,	/* Pointer to the data to be written */
@@ -4219,7 +4218,6 @@ FRESULT f_write_fast (
 	LEAVE_FF(fs, FR_OK);
 }
 #endif
-#endif
 
 
 
@@ -4680,8 +4678,7 @@ FRESULT f_lseek (
 
 
 
-#ifdef FF_FASTFS
-#if FF_USE_FASTSEEK
+#if FF_FASTFS && FF_USE_FASTSEEK
 /*-----------------------------------------------------------------------*/
 /* Seek File Read/Write Pointer                                          */
 /*-----------------------------------------------------------------------*/
@@ -4708,7 +4705,6 @@ DWORD *f_expand_cltbl (
 	return fp->cltbl;
 }
 #endif
-#endif
 
 
 

bdk/libs/fatfs/ff.h

@@ -26,8 +26,8 @@
 extern "C" {
 #endif
 
-#include "../../utils/types.h"	/* Basic integer types */
-#include "ffconf.h"		/* FatFs configuration options */
+#include <utils/types.h>	/* Basic integer types */
+#include <fatfs_cfg.h>	/* FatFs configuration options */
 
 #if FF_DEFINED != FFCONF_DEF
 #error Wrong configuration file (ffconf.h).
@@ -246,7 +246,7 @@ typedef enum {
 	FR_LOCKED,				/* (16) The operation is rejected according to the file sharing policy */
 	FR_NOT_ENOUGH_CORE,		/* (17) LFN working buffer could not be allocated */
 	FR_TOO_MANY_OPEN_FILES,	/* (18) Number of open files > FF_FS_LOCK */
-#ifdef FF_FASTFS
+#if FF_FASTFS
 	FR_INVALID_PARAMETER,	/* (19) Given parameter is invalid */
 	FR_CLTBL_NO_INIT	    /* (20) The cluster table for fast seek/read/write was not created */
 #else
@@ -263,10 +263,8 @@ FRESULT f_open (FIL* fp, const TCHAR* path, BYTE mode);				/* Open or create a f
 FRESULT f_close (FIL* fp);											/* Close an open file object */
 FRESULT f_read (FIL* fp, void* buff, UINT btr, UINT* br);			/* Read data from the file */
 FRESULT f_write (FIL* fp, const void* buff, UINT btw, UINT* bw);	/* Write data to the file */
-#ifdef FF_FASTFS
 FRESULT f_read_fast (FIL* fp, const void* buff, UINT btr);			/* Fast read data from the file */
 FRESULT f_write_fast (FIL* fp, const void* buff, UINT btw);         /* Fast write data to the file */
-#endif
 FRESULT f_lseek (FIL* fp, FSIZE_t ofs);								/* Move file pointer of the file object */
 FRESULT f_truncate (FIL* fp);										/* Truncate the file */
 FRESULT f_sync (FIL* fp);											/* Flush cached data of the writing file */
@@ -288,9 +286,7 @@ FRESULT f_getfree (const TCHAR* path, DWORD* nclst, FATFS** fatfs);	/* Get numbe
 FRESULT f_getlabel (const TCHAR* path, TCHAR* label, DWORD* vsn);	/* Get volume label */
 FRESULT f_setlabel (const TCHAR* label);							/* Set volume label */
 FRESULT f_forward (FIL* fp, UINT(*func)(const BYTE*,UINT), UINT btf, UINT* bf);	/* Forward data to the stream */
-#ifdef FF_FASTFS
 DWORD  *f_expand_cltbl (FIL* fp, UINT tblsz, FSIZE_t ofs);			/* Expand file and populate cluster table */
-#endif
 FRESULT f_expand (FIL* fp, FSIZE_t fsz, BYTE opt);					/* Allocate a contiguous block to the file */
 FRESULT f_mount (FATFS* fs, const TCHAR* path, BYTE opt);			/* Mount/Unmount a logical drive */
 FRESULT f_mkfs (const TCHAR* path, BYTE opt, DWORD au, void* work, UINT len);	/* Create a FAT volume */

bdk/libs/lv_conf.h

@@ -17,8 +17,8 @@
 #ifndef LV_CONF_H
 #define LV_CONF_H
 
-#include "../utils/types.h"
-#include "../../../common/memory_map.h"
+#include <utils/types.h>
+#include <memory_map.h>
 /*===================
    Dynamic memory
  *===================*/
@@ -32,7 +32,7 @@
 #  define LV_MEM_ADR          NYX_LV_MEM_ADR /*Set an address for memory pool instead of allocation it as an array. Can be in external SRAM too.*/
 #  define LV_MEM_AUTO_DEFRAG  1              /*Automatically defrag on free*/
 #else       /*LV_MEM_CUSTOM*/
-#  define LV_MEM_CUSTOM_INCLUDE "../../../mem/heap.h"   /*Header for the dynamic memory function*/
+#  define LV_MEM_CUSTOM_INCLUDE <mem/heap.h> /*Header for the dynamic memory function*/
 #  define LV_MEM_CUSTOM_ALLOC   malloc       /*Wrapper to malloc*/
 #  define LV_MEM_CUSTOM_FREE    free         /*Wrapper to free*/
 #endif     /*LV_MEM_CUSTOM*/
@@ -149,7 +149,7 @@
 /*HAL settings*/
 #define LV_TICK_CUSTOM               1                       /*1: use a custom tick source (removing the need to manually update the tick with `lv_tick_inc`) */
 #if LV_TICK_CUSTOM == 1
-#define LV_TICK_CUSTOM_INCLUDE       "../../../utils/util.h" /*Header for the sys time function*/
+#define LV_TICK_CUSTOM_INCLUDE       <utils/util.h>          /*Header for the sys time function*/
 #define LV_TICK_CUSTOM_SYS_TIME_EXPR (get_tmr_ms())          /*Expression evaluating to current systime in ms*/
 #endif     /*LV_TICK_CUSTOM*/
 

bdk/libs/lvgl/lv_core/lv_indev.c

@@ -357,7 +357,10 @@ static void indev_pointer_proc(lv_indev_t * i, lv_indev_data_t * data)
     if(i->cursor != NULL &&
             (i->proc.last_point.x != data->point.x ||
              i->proc.last_point.y != data->point.y)) {
-        lv_obj_set_pos(i->cursor, data->point.x, data->point.y);
+        /*Use cursor's center as pointer*/
+        uint32_t off_x = lv_obj_get_width(i->cursor) >> 1;
+        uint32_t off_y = lv_obj_get_height(i->cursor) >> 1;
+        lv_obj_set_pos(i->cursor, data->point.x - off_x, data->point.y - off_y);
     }
 
     i->proc.act_point.x = data->point.x;

bdk/libs/lvgl/lv_fonts/hekate_symbol_120.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_HEKATE_SYMBOL_120 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/hekate_symbol_20.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_HEKATE_SYMBOL_20 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/hekate_symbol_30.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_HEKATE_SYMBOL_30 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/interui_20.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_INTERUI_20 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/interui_30.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_INTERUI_30 != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_fonts/ubuntu_mono.c

@@ -16,7 +16,7 @@
 
 #include "../lv_misc/lv_font.h"
 
-#include "../../../../../common/memory_map.h"
+#include <memory_map.h>
 
 #if USE_UBUNTU_MONO != 0	/*Can be enabled in lv_conf.h*/
 

bdk/libs/lvgl/lv_hal/lv_hal_indev.h

@@ -17,7 +17,7 @@ extern "C" {
  *********************/
 #include <stdint.h>
 #include "lv_hal.h"
-#include "../../../utils/types.h"
+#include <utils/types.h>
 #include "../lv_misc/lv_area.h"
 #include "../lv_core/lv_obj.h"
 

bdk/libs/lvgl/lv_misc/lv_area.h

@@ -15,7 +15,7 @@ extern "C" {
  *      INCLUDES
  *********************/
 #include <string.h>
-#include "../../../utils/types.h"
+#include <utils/types.h>
 
 /*********************
  *      DEFINES

bdk/libs/lvgl/lv_misc/lv_circ.h

@@ -16,7 +16,7 @@ extern "C" {
  *********************/
 #include <stddef.h>
 #include "lv_area.h"
-#include "../../../utils/types.h"
+#include <utils/types.h>
 
 /*********************
  *      DEFINES