Bump version to v4.9.1

[Stock]
fss0={sd path}
stock=1

Can now work for both older and new HOS versions.

- <= 6.2.0 loads nothing and removes kernel patching.
- >= 7.0.0 loads exo, wb and removes kernel patching.

This requires that fss0 {sd path} is valid. Otherwise it will fail on ini cfg parsing.

If <= 6.2.0 and no FSS0
[Stock]
stock=1

will provide a cleaner stock with no kernel patching.

Makefile

@@ -4,102 +4,106 @@ endif
 
 include $(DEVKITARM)/base_rules
 
-TARGET := hekate
+################################################################################
+
+IPL_LOAD_ADDR := 0x40008000
+IPL_MAGIC := 0x43544349 #"ICTC"
 BLVERSION_MAJOR := 4
-BLVERSION_MINOR := 6
-BUILD := build
-OUTPUT := output
+BLVERSION_MINOR := 9
+BLVERSION_HOTFX := 1
+
+BL_RESERVED := 0
+
+################################################################################
+
+TARGET := hekate
+BUILDDIR := build
+OUTPUTDIR := output
 SOURCEDIR = bootloader
 VPATH = $(dir $(wildcard ./$(SOURCEDIR)/*/)) $(dir $(wildcard ./$(SOURCEDIR)/*/*/))
 
-OBJS = $(addprefix $(BUILD)/$(TARGET)/, \
+# Main and graphics.
+OBJS = $(addprefix $(BUILDDIR)/$(TARGET)/, \
 	start.o \
-	main.o \
-	fe_emmc_tools.o \
-	fe_info.o \
-	fe_tools.o \
-	config.o \
-	btn.o \
-	clock.o \
-	cluster.o \
-	fuse.o \
-	gpio.o \
-	heap.o \
-	hos.o \
-	hos_config.o \
-	secmon_exo.o \
-	i2c.o \
-	kfuse.o \
-	bq24193.o \
-	max7762x.o \
-	max17050.o \
-	mc.o \
-	nx_emmc.o \
-	sdmmc.o \
-	sdmmc_driver.o \
-	sdram.o \
-	tui.o \
-	util.o \
-	di.o \
-	gfx.o \
-	pinmux.o \
-	pkg1.o \
-	pkg2.o \
-	se.o \
-	tsec.o \
-	uart.o \
-	hw_init.o \
-	dirlist.o \
-	ini.o \
-	ianos.o \
-	smmu.o \
-	max77620-rtc.o \
+	main.o heap.o \
+	gfx.o tui.o \
+	fe_emmc_tools.o fe_info.o fe_tools.o \
 )
 
-OBJS += $(addprefix $(BUILD)/$(TARGET)/, \
+# Hardware.
+OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
+	clock.o cluster.o di.o gpio.o i2c.o mc.o sdram.o pinmux.o se.o smmu.o tsec.o uart.o \
+	fuse.o kfuse.o \
+	sdmmc.o sdmmc_driver.o \
+	bq24193.o max17050.o max7762x.o max77620-rtc.o \
+	hw_init.o \
+)
+
+# Utilities.
+OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
+	btn.o dirlist.o ianos.o util.o \
+	config.o ini.o \
+)
+
+# Horizon.
+OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
+	nx_emmc.o \
+	hos.o hos_config.o pkg1.o pkg2.o fss.o secmon_exo.o sept.o \
+)
+
+# Libraries.
+OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
 	lz.o blz.o \
 	diskio.o ff.o ffunicode.o ffsystem.o \
 	elfload.o elfreloc_arm.o \
 )
 
-CUSTOMDEFINES := -DBLVERSIONMJ=$(BLVERSION_MAJOR) -DBLVERSIONMN=$(BLVERSION_MINOR) -DMENU_LOGO_ENABLE
-#CUSTOMDEFINES += -DDEBUG
+################################################################################
+
+CUSTOMDEFINES := -DIPL_LOAD_ADDR=$(IPL_LOAD_ADDR) -DBL_MAGIC=$(IPL_MAGIC)
+CUSTOMDEFINES += -DBL_VER_MJ=$(BLVERSION_MAJOR) -DBL_VER_MN=$(BLVERSION_MINOR) -DBL_VER_HF=$(BLVERSION_HOTFX) -DBL_RESERVED=$(BL_RESERVED)
+CUSTOMDEFINES += -DMENU_LOGO_ENABLE
+
 # 0: UART_A, 1: UART_B.
 #CUSTOMDEFINES += -DDEBUG_UART_PORT=0
 
+#CUSTOMDEFINES += -DDEBUG
+
 ARCH := -march=armv4t -mtune=arm7tdmi -mthumb -mthumb-interwork
 CFLAGS = $(ARCH) -O2 -nostdlib -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-inline -std=gnu11 -Wall $(CUSTOMDEFINES)
-LDFLAGS = $(ARCH) -nostartfiles -lgcc -Wl,--nmagic,--gc-sections
+LDFLAGS = $(ARCH) -nostartfiles -lgcc -Wl,--nmagic,--gc-sections -Xlinker --defsym=IPL_LOAD_ADDR=$(IPL_LOAD_ADDR)
 
 MODULEDIRS := $(wildcard modules/*)
 
+################################################################################
+
 .PHONY: all clean $(MODULEDIRS)
 
 all: $(TARGET).bin
 	@echo -n "Payload size is "
-	@wc -c < $(OUTPUT)/$(TARGET).bin
+	@wc -c < $(OUTPUTDIR)/$(TARGET).bin
 	@echo "Max size is 126296 Bytes."
 
 clean:
 	@rm -rf $(OBJS)
-	@rm -rf $(BUILD)
-	@rm -rf $(OUTPUT)
+	@rm -rf $(BUILDDIR)
+	@rm -rf $(OUTPUTDIR)
 
 $(MODULEDIRS):
 	$(MAKE) -C $@ $(MAKECMDGOALS)
 
-$(TARGET).bin: $(BUILD)/$(TARGET)/$(TARGET).elf $(MODULEDIRS)
-	$(OBJCOPY) -S -O binary $< $(OUTPUT)/$@
-	@printf ICTC$(BLVERSION_MAJOR)$(BLVERSION_MINOR) >> $(OUTPUT)/$@
+$(TARGET).bin: $(BUILDDIR)/$(TARGET)/$(TARGET).elf $(MODULEDIRS)
+	$(OBJCOPY) -S -O binary $< $(OUTPUTDIR)/$@
+	@printf ICTC$(BLVERSION_MAJOR)$(BLVERSION_MINOR) >> $(OUTPUTDIR)/$@
 
-$(BUILD)/$(TARGET)/$(TARGET).elf: $(OBJS)
+$(BUILDDIR)/$(TARGET)/$(TARGET).elf: $(OBJS)
 	$(CC) $(LDFLAGS) -T $(SOURCEDIR)/link.ld $^ -o $@
 
-$(BUILD)/$(TARGET)/%.o: %.c
+$(BUILDDIR)/$(TARGET)/%.o: %.c
 	$(CC) $(CFLAGS) -c $< -o $@
 
-$(BUILD)/$(TARGET)/%.o: %.S
-	@mkdir -p "$(BUILD)"
-	@mkdir -p "$(BUILD)/$(TARGET)"
-	@mkdir -p "$(OUTPUT)"
+$(BUILDDIR)/$(TARGET)/%.o: %.S
+	@mkdir -p "$(BUILDDIR)"
+	@mkdir -p "$(BUILDDIR)/$(TARGET)"
+	@mkdir -p "$(OUTPUTDIR)"
 	$(CC) $(CFLAGS) -c $< -o $@

README.md

@@ -20,6 +20,8 @@ Custom Nintendo Switch bootloader, firmware patcher, and more.
 | bootloader/payloads/ | For payloads. 'Payloads...' menu. Autoboot only supported by including them into an ini. All CFW bootloaders, tools, Linux payloads are supported. |
 | bootloader/libtools/ | Future reserved                                                       |
 
+**Note**: Sept files for booting 7.0.0 and up are expected at /sept folder at root of sd card.
+
 
 ## Bootloader configuration
 
@@ -29,15 +31,15 @@ The bootloader can be configured via 'bootloader/hekate_ipl.ini' (if it is prese
 There are four possible type of entries. "**[ ]**": Boot entry, "**{ }**": Caption, "**#**": Comment, "*newline*": .ini cosmetic newline.
 
 
-### Configuration keys/values when boot entry is **config**:
+### Global Configuration keys/values when boot entry is **config**:
 
 | Config option      | Description                                                |
 | ------------------ | ---------------------------------------------------------- |
 | autoboot=0         | 0: Disable, #: Boot entry number to auto boot.             |
 | bootwait=3         | 0: Disable (It also disables bootlogo. Having **VOL-** pressed since injection goes to menu.), #: Time to wait for **VOL-** to enter menu. |
-| customlogo=0       | 0: Use default hekate bootlogo, 1: Use bootlogo.bmp.       |
 | verification=2     | 0: Disable Backup/Restore verification, 1: Sparse (block based, fast and not 100% reliable), 2: Full (sha256 based, slow and 100% reliable). |
 | autohosoff=1       | 0: Disable, 1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely, 2: No logo, immediately powers off.|
+| autonogc=1         | 0: Disable, 1: Automatically applies nogc patch if unburnt fuses found and a >= 4.0.0 HOS is booted. |
 | backlight=100      | Screen backlight level. 0-255.                             |
 
 
@@ -51,12 +53,34 @@ There are four possible type of entries. "**[ ]**": Boot entry, "**{ }**": Capti
 | kernel={SD path}   | Replaces the kernel binary                                 |
 | kip1={SD path}     | Replaces/Adds kernel initial process. Multiple can be set. |
 | kip1={SD folder}/* | Loads every .kip/.kip1 inside a folder. Compatible with single kip1 keys. |
-| kip1patch=patchname| Enables a kip1 patch. Specify with multiple lines and/or as CSV. Implemented patches right now are nosigchk,nogc |
+| fss0={SD path}     | Takes a fusee-secondary binary and extracts all needed parts from it. |
+| kip1patch=patchname| Enables a kip1 patch. Specify with multiple lines and/or as CSV. Current available patches nosigchk. |
 | fullsvcperm=1      | Disables SVC verification (full services permission)       |
-| debugmode=1        | Enables Debug mode                                         |
+| debugmode=1        | Enables Debug mode. Obsolete when used with exosphere as secmon. |
 | atmosphere=1       | Enables Atmosphère patching                                |
+| stock=1            | Disables unneeded kernel patching when running stock or semi-stock. |
 | payload={SD path}  | Payload launching. Tools, Linux, CFW bootloaders, etc.     |
 
+**Note1**: When using the wildcard (`/*`) with `kip1` you can still use the normal `kip1` after that to load extra signle kips.
+
+**Note2**: When using FSS0 it parses exosphere, warmboot and all core kips. You can override the first 2 by using `secmon`/`warmboot` after defining `fss0`.
+You can define `kip1` to load an extra kip or many via the wildcard (`/*`) usage.
+
+**Warning**: Never define core kips when using `fss0` and make sure that the folder (when using `/*`), does not include them.
+
+
+### Payload storage:
+
+Hekate now has a new storage in the binary that helps it configure it outside of BPMP enviroment:
+
+| Offset / Name        | Description                                                       |
+| -------------------- | ----------------------------------------------------------------- |
+| '0x94' boot_cfg      | bit0: Force AutoBoot, bit1: Show launch log, bit2: sept run.      |
+| '0x98' autoboot      | If `Force AutoBoot`: 0: Force go to menu, else boot that entry.   |
+| '0x9C' autoboot_list | If `Force AutoBoot` and `autoboot` then it boots from ini folder. |
+| '0xA0' extra_cfg     | Reserved.                                                         |
+| '0xA4' rsvd[128]     | Reserved.                                                         |
+
 
 You can find a template [Here](./res/hekate_ipl_template.ini)
 

bootloader/config/config.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -17,20 +17,15 @@
 #include <string.h>
 #include <stdlib.h>
 
-#include "../utils/btn.h"
 #include "config.h"
-#include "../libs/fatfs/ff.h"
 #include "ini.h"
-#include "../utils/list.h"
-#include "../gfx/tui.h"
-#include "../utils/util.h"
 #include "../gfx/gfx.h"
-
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
-//TODO: Create more macros (info, header, debug, etc) with different colors and utilize them for consistency.
-#define EPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, 0xFFCCCCCC)
-#define EPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, args, 0xFFCCCCCC)
+#include "../gfx/tui.h"
+#include "../libs/fatfs/ff.h"
+#include "../soc/t210.h"
+#include "../utils/btn.h"
+#include "../utils/list.h"
+#include "../utils/util.h"
 
 extern hekate_config h_cfg;
 extern int sd_mount();
@@ -41,13 +36,14 @@ void set_default_configuration()
 	h_cfg.autoboot = 0;
 	h_cfg.autoboot_list = 0;
 	h_cfg.bootwait = 3;
-	h_cfg.customlogo = 0;
-	h_cfg.verification = 2;
+	h_cfg.verification = 1;
 	h_cfg.se_keygen_done = 0;
 	h_cfg.sbar_time_keeping = 0;
 	h_cfg.backlight = 100;
 	h_cfg.autohosoff = 0;
 	h_cfg.errors = 0;
+	h_cfg.autonogc = 1;
+	h_cfg.sept_run = EMC(EMC_SCRATCH0) & EMC_SEPT_RUN;
 }
 
 int create_config_entry()
@@ -93,9 +89,6 @@ int create_config_entry()
 	f_puts("\nbootwait=", &fp);
 	itoa(h_cfg.bootwait, lbuf, 10);
 	f_puts(lbuf, &fp);
-	f_puts("\ncustomlogo=", &fp);
-	itoa(h_cfg.customlogo, lbuf, 10);
-	f_puts(lbuf, &fp);
 	f_puts("\nverification=", &fp);
 	itoa(h_cfg.verification, lbuf, 10);
 	f_puts(lbuf, &fp);
@@ -105,6 +98,9 @@ int create_config_entry()
 	f_puts("\nautohosoff=", &fp);
 	itoa(h_cfg.autohosoff, lbuf, 10);
 	f_puts(lbuf, &fp);
+	f_puts("\nautonogc=", &fp);
+	itoa(h_cfg.autonogc, lbuf, 10);
+	f_puts(lbuf, &fp);
 	f_puts("\n", &fp);
 
 	if (mainIniFound)
@@ -156,6 +152,18 @@ int create_config_entry()
 	return 0;
 }
 
+static void _save_config()
+{
+	gfx_clear_grey(&gfx_ctxt, 0x1B);
+	gfx_con_setpos(&gfx_con, 0, 0);
+
+	if (!create_config_entry())
+		gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
+	else
+		EPRINTF("\nConfiguration saving failed!");
+	gfx_puts(&gfx_con, "\nPress any key...");
+}
+
 static void _config_autoboot_list(void *ent)
 {
 	gfx_clear_grey(&gfx_ctxt, 0x1B);
@@ -216,21 +224,13 @@ static void _config_autoboot_list(void *ent)
 			}
 
 			memset(&ments[i], 0, sizeof(ment_t));
-			menu_t menu = {ments, "Select a list entry to auto boot", 0, 0};
+			menu_t menu = {ments, "Select an entry to auto boot", 0, 0};
 			temp_autoboot = (u32 *)tui_do_menu(&gfx_con, &menu);
 			if (temp_autoboot != NULL)
 			{
-				gfx_clear_grey(&gfx_ctxt, 0x1B);
-				gfx_con_setpos(&gfx_con, 0, 0);
-
 				h_cfg.autoboot = *(u32 *)temp_autoboot;
 				h_cfg.autoboot_list = 1;
-				// Save choice to ini file.
-				if (!create_config_entry())
-					gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-				else
-					EPRINTF("\nConfiguration saving failed!");
-				gfx_puts(&gfx_con, "\nPress any key...");
+				_save_config();
 
 				ment_t *tmp = (ment_t *)ent;
 				tmp->data = NULL;
@@ -240,7 +240,7 @@ static void _config_autoboot_list(void *ent)
 		}
 		else
 		{
-			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists in SD Card!.");
+			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists!.");
 			goto out;
 		}
 	}
@@ -344,24 +344,16 @@ void config_autoboot()
 			temp_autoboot = (u32 *)tui_do_menu(&gfx_con, &menu);
 			if (temp_autoboot != NULL)
 			{
-				gfx_clear_grey(&gfx_ctxt, 0x1B);
-				gfx_con_setpos(&gfx_con, 0, 0);
-
 				h_cfg.autoboot = *(u32 *)temp_autoboot;
 				h_cfg.autoboot_list = 0;
-				// Save choice to ini file.
-				if (!create_config_entry())
-					gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-				else
-					EPRINTF("\nConfiguration saving failed!");
-				gfx_puts(&gfx_con, "\nPress any key...");
+				_save_config();
 			}
 			else
 				goto out2;
 		}
 		else
 		{
-			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists in SD Card!.");
+			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists!.");
 			goto out;
 		}
 	}
@@ -427,16 +419,8 @@ void config_bootdelay()
 	u32 *temp_bootwait = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_bootwait != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.bootwait = *(u32 *)temp_bootwait;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}
 
 	free(ments);
@@ -448,64 +432,6 @@ void config_bootdelay()
 	btn_wait();
 }
 
-void config_customlogo()
-{
-	gfx_clear_grey(&gfx_ctxt, 0x1B);
-	gfx_con_setpos(&gfx_con, 0, 0);
-
-	ment_t *ments = (ment_t *)malloc(sizeof(ment_t) * 5);
-	u32 *cb_values = (u32 *)malloc(sizeof(u32) * 2);
-
-	for (u32 j = 0; j < 2; j++)
-	{
-		cb_values[j] = j;
-		ments[j + 2].type = MENT_DATA;
-		ments[j + 2].data = &cb_values[j];
-	}
-
-	ments[0].type = MENT_BACK;
-	ments[0].caption = "Back";
-
-	ments[1].type = MENT_CHGLINE;
-
-	if (h_cfg.customlogo)
-	{
-		ments[2].caption = " Disable";
-		ments[3].caption = "*Enable";
-
-	}
-	else
-	{
-		ments[2].caption = "*Disable";
-		ments[3].caption = " Enable";
-	}
-
-	memset(&ments[4], 0, sizeof(ment_t));
-	menu_t menu = {ments, "Custom bootlogo", 0, 0};
-
-	u32 *temp_customlogo = (u32 *)tui_do_menu(&gfx_con, &menu);
-	if (temp_customlogo != NULL)
-	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
-		h_cfg.customlogo = *(u32 *)temp_customlogo;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
-	}
-
-	free(ments);
-	free(cb_values);
-
-	if (temp_customlogo == NULL)
-		return;
-	btn_wait();
-}
-
 void config_verification()
 {
 	gfx_clear_grey(&gfx_ctxt, 0x1B);
@@ -527,22 +453,17 @@ void config_verification()
 
 	ments[1].type = MENT_CHGLINE;
 
-	memcpy(vr_text,       " Disable (Fastest)", 19);
-	memcpy(vr_text + 64,  " Sparse  (Fast - Not  reliable)", 32);
-	memcpy(vr_text + 128, " Full    (Slow - 100% reliable)", 32);
+	memcpy(vr_text,       " Disable (Fastest - Unsafe)", 28);
+	memcpy(vr_text + 64,  " Sparse  (Fast - Safe)", 23);
+	memcpy(vr_text + 128, " Full    (Slow - Safe)", 23);
 
 	for (u32 i = 0; i < 3; i++)
 	{
 		if (h_cfg.verification != i)
-		{
 			vr_text[64 * i] = ' ';
-			ments[2 + i].caption = vr_text + (i * 64);
-		}
 		else
-		{
 			vr_text[64 * i] = '*';
-			ments[2 + i].caption = vr_text + (i * 64);
-		}
+		ments[2 + i].caption = vr_text + (i * 64);
 	}
 
 	memset(&ments[5], 0, sizeof(ment_t));
@@ -551,16 +472,8 @@ void config_verification()
 	u32 *temp_verification = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_verification != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.verification = *(u32 *)temp_verification;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}
 
 	free(ments);
@@ -604,7 +517,6 @@ void config_backlight()
 			bri_text[i * 32 + 1] = i + '0';
 			memcpy(bri_text + i * 32 + 2, "0%", 3);
 		}
-			
 		else
 			memcpy(bri_text + i * 32 + 1, "100%", 5);
 
@@ -619,16 +531,8 @@ void config_backlight()
 	u32 *temp_backlight = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_backlight != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.backlight = (*(u32 *)temp_backlight) * 2;
-		//Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}
 
 	free(ments);
@@ -685,16 +589,8 @@ void config_auto_hos_poweroff()
 	u32 *temp_autohosoff = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_autohosoff != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.autohosoff = *(u32 *)temp_autohosoff;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}
 
 	free(ments);
@@ -704,3 +600,52 @@ void config_auto_hos_poweroff()
 		return;
 	btn_wait();
 }
+
+void config_nogc()
+{
+	gfx_clear_grey(&gfx_ctxt, 0x1B);
+	gfx_con_setpos(&gfx_con, 0, 0);
+
+	ment_t *ments = (ment_t *)malloc(sizeof(ment_t) * 5);
+	u32 *cb_values = (u32 *)malloc(sizeof(u32) * 2);
+
+	for (u32 j = 0; j < 2; j++)
+	{
+		cb_values[j] = j;
+		ments[j + 2].type = MENT_DATA;
+		ments[j + 2].data = &cb_values[j];
+	}
+
+	ments[0].type = MENT_BACK;
+	ments[0].caption = "Back";
+
+	ments[1].type = MENT_CHGLINE;
+
+	if (h_cfg.autonogc)
+	{
+		ments[2].caption = " Disable";
+		ments[3].caption = "*Auto";
+	}
+	else
+	{
+		ments[2].caption = "*Disable";
+		ments[3].caption = " Auto";
+	}
+
+	memset(&ments[4], 0, sizeof(ment_t));
+	menu_t menu = {ments, "No Gamecard", 0, 0};
+
+	u32 *temp_nogc = (u32 *)tui_do_menu(&gfx_con, &menu);
+	if (temp_nogc != NULL)
+	{
+		h_cfg.autonogc = *(u32 *)temp_nogc;
+		_save_config();
+	}
+
+	free(ments);
+	free(cb_values);
+
+	if (temp_nogc == NULL)
+		return;
+	btn_wait();
+}

bootloader/config/config.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -25,14 +25,15 @@ typedef struct _hekate_config
 	u32 autoboot;
 	u32 autoboot_list;
 	u32 bootwait;
-	u32 customlogo;
 	u32 verification;
 	u32 backlight;
 	u32 autohosoff;
-	u32 errors;
+	u32 autonogc;
 	// Global temporary config.
 	int se_keygen_done;
 	u32 sbar_time_keeping;
+	u32 errors;
+	int sept_run;
 } hekate_config;
 
 typedef enum
@@ -44,9 +45,9 @@ void set_default_configuration();
 int create_config_entry();
 void config_autoboot();
 void config_bootdelay();
-void config_customlogo();
 void config_verification();
 void config_backlight();
 void config_auto_hos_poweroff();
+void config_nogc();
 
 #endif /* _CONFIG_H_ */

bootloader/config/ini.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (C) 2018 CTCaer
+ * Copyright (C) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -24,11 +24,39 @@
 
 static char *_strdup(char *str)
 {
+	if (!str)
+		return NULL;
 	char *res = (char *)malloc(strlen(str) + 1);
 	strcpy(res, str);
+
 	return res;
 }
 
+u32 _find_section_name(char *lbuf, u32 lblen, char schar)
+{
+	u32 i;
+	for (i = 0; i < lblen  && lbuf[i] != schar && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
+		;
+	lbuf[i] = 0;
+
+	return i;
+}
+
+ini_sec_t *_ini_create_section(link_t *dst, ini_sec_t *csec, char *name, u8 type)
+{
+	if (csec)
+	{
+		list_append(dst, &csec->link);
+		csec = NULL;
+	}
+
+	csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
+	csec->name = _strdup(name);
+	csec->type = type;
+
+	return csec;
+}
+
 int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 {
 	u32 lblen;
@@ -43,6 +71,7 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 
 	memcpy(filename, ini_path, pathlen + 1);
 
+	// Get all ini filenames.
 	if (is_dir)
 	{
 		filelist = dirlist(filename, "*.ini", false);
@@ -57,6 +86,7 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 
 	do
 	{
+		// Copy ini filename in path string.
 		if (is_dir)
 		{
 			if (filelist[k * 256])
@@ -68,6 +98,7 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 				break;
 		}
 
+		// Open ini.
 		if (f_open(&fp, filename, FA_READ) != FR_OK)
 		{
 			free(filelist);
@@ -89,75 +120,31 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 
 			if (lblen > 2 && lbuf[0] == '[') // Create new section.
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
+				_find_section_name(lbuf, lblen, ']');
 
-				u32 i;
-				for (i = 0; i < lblen  && lbuf[i] != ']' && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = _strdup(&lbuf[1]);
-				csec->type = INI_CHOICE;
+				csec = _ini_create_section(dst, csec, &lbuf[1], INI_CHOICE);
 				list_init(&csec->kvs);
 			}
 			else if (lblen > 2 && lbuf[0] == '{') //Create new caption.
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
+				_find_section_name(lbuf, lblen, '}');
 
-				u32 i;
-				for (i = 0; i < lblen && lbuf[i] != '}' && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = _strdup(&lbuf[1]);
-				csec->type = INI_CAPTION;
+				csec = _ini_create_section(dst, csec, &lbuf[1], INI_CAPTION);
 				csec->color = 0xFF0AB9E6;
 			}
 			else if (lblen > 2 && lbuf[0] == '#') //Create empty lines and comments.
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
+				_find_section_name(lbuf, lblen, '\0');
 
-				u32 i;
-				for (i = 0; i < lblen && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = _strdup(&lbuf[1]);
-				csec->type = INI_COMMENT;
+				csec = _ini_create_section(dst, csec, &lbuf[1], INI_COMMENT);
 			}
 			else if (lblen < 2)
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = NULL;
-				csec->type = INI_NEWLINE;
+				csec = _ini_create_section(dst, csec, NULL, INI_NEWLINE);
 			}
 			else if (csec && csec->type == INI_CHOICE) //Extract key/value.
 			{
-				u32 i;
-				for (i = 0; i < lblen && lbuf[i] != '=' && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
+				u32 i = _find_section_name(lbuf, lblen, '=');
 
 				ini_kv_t *kv = (ini_kv_t *)malloc(sizeof(ini_kv_t));
 				kv->key = _strdup(&lbuf[0]);
@@ -169,8 +156,11 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 		f_close(&fp);
 
 		if (csec)
+		{
 			list_append(dst, &csec->link);
-
+			if (is_dir)
+				csec = NULL;
+		}
 	} while (is_dir);
 
 	free(filename);

bootloader/frontend/fe_emmc_tools.c

@@ -31,29 +31,27 @@
 #include "../utils/btn.h"
 #include "../utils/util.h"
 
+#define EMMC_BUF_ALIGNED 0xB5000000
+#define SDXC_BUF_ALIGNED 0xB6000000
+#define MIXD_BUF_ALIGNED 0xB7000000
+
 extern sdmmc_t sd_sdmmc;
 extern sdmmc_storage_t sd_storage;
 extern FATFS sd_fs;
 extern hekate_config h_cfg;
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
 
 extern bool sd_mount();
 extern void sd_unmount();
 extern void emmcsn_path_impl(char *path, char *sub_dir, char *filename, sdmmc_storage_t *storage);
 
-//TODO: Create more macros (info, header, debug, etc) with different colors and utilize them for consistency.
-#define EPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, 0xFFCCCCCC)
-#define EPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, args, 0xFFCCCCCC)
-#define WPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, 0xFFCCCCCC)
-#define WPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, args, 0xFFCCCCCC)
-
 static int _dump_emmc_verify(sdmmc_storage_t *storage, u32 lba_curr, char *outFilename, emmc_part_t *part)
 {
 	FIL fp;
+	u8 sparseShouldVerify = 0;
 	u32 btn = 0;
 	u32 prevPct = 200;
 	int res = 0;
+	u32 sdFileSector = 0;
 
 	u8 hashEm[0x20];
 	u8 hashSd[0x20];
@@ -62,14 +60,10 @@ static int _dump_emmc_verify(sdmmc_storage_t *storage, u32 lba_curr, char *outFi
 	{
 		u32 totalSectorsVer = (u32)((u64)f_size(&fp) >> (u64)9);
 
-		u32 numSectorsPerIter = 0;
-		if (totalSectorsVer > 0x200000)
-			numSectorsPerIter = 8192; //4MB Cache
-		else
-			numSectorsPerIter = 512;  //256KB Cache
+		const u32 NUM_SECTORS_PER_ITER = 8192; // 4MB Cache.
 
-		u8 *bufEm = (u8 *)calloc(numSectorsPerIter, NX_EMMC_BLOCKSIZE);
-		u8 *bufSd = (u8 *)calloc(numSectorsPerIter, NX_EMMC_BLOCKSIZE);
+		u8 *bufEm = (u8 *)EMMC_BUF_ALIGNED;
+		u8 *bufSd = (u8 *)SDXC_BUF_ALIGNED;
 
 		u32 pct = (u64)((u64)(lba_curr - part->lba_start) * 100u) / (u64)(part->lba_end - part->lba_start);
 		tui_pbar(&gfx_con, 0, gfx_con.y, pct, 0xFF96FF00, 0xFF155500);
@@ -77,53 +71,49 @@ static int _dump_emmc_verify(sdmmc_storage_t *storage, u32 lba_curr, char *outFi
 		u32 num = 0;
 		while (totalSectorsVer > 0)
 		{
-			num = MIN(totalSectorsVer, numSectorsPerIter);
-
-			if (!sdmmc_storage_read(storage, lba_curr, num, bufEm))
+			num = MIN(totalSectorsVer, NUM_SECTORS_PER_ITER);
+			
+			// Check every time or every 4.
+			// Every 4 protects from fake sd, sector corruption and frequent I/O corruption.
+			// Full provides all that, plus protection from extremely rare I/O corruption.
+			if ((h_cfg.verification & 2) || !(sparseShouldVerify % 4))
 			{
-				gfx_con.fntsz = 16;
-				EPRINTFARGS("\nFailed to read %d blocks (@LBA %08X),\nfrom eMMC!\n\nVerification failed..\n",
-					num, lba_curr);
+				if (!sdmmc_storage_read(storage, lba_curr, num, bufEm))
+				{
+					gfx_con.fntsz = 16;
+					EPRINTFARGS("\nFailed to read %d blocks (@LBA %08X),\nfrom eMMC!\n\nVerification failed..\n",
+						num, lba_curr);
+	
+					f_close(&fp);
+					return 1;
+				}
+				f_lseek(&fp, (u64)sdFileSector << (u64)9);
+				if (f_read(&fp, bufSd, num << 9, NULL))
+				{
+					gfx_con.fntsz = 16;
+					EPRINTFARGS("\nFailed to read %d blocks (@LBA %08X),\nfrom sd card!\n\nVerification failed..\n", num, lba_curr);
+	
+					f_close(&fp);
+					return 1;
+				}
 
-				free(bufEm);
-				free(bufSd);
-				f_close(&fp);
-				return 1;
-			}
-			if (f_read(&fp, bufSd, num << 9, NULL))
-			{
-				gfx_con.fntsz = 16;
-				EPRINTFARGS("\nFailed to read %d blocks (@LBA %08X),\nfrom sd card!\n\nVerification failed..\n", num, lba_curr);
-
-				free(bufEm);
-				free(bufSd);
-				f_close(&fp);
-				return 1;
-			}
-
-			switch (h_cfg.verification)
-			{
-			case 1:
-				res = memcmp32sparse((u32 *)bufEm, (u32 *)bufSd, num << 9);
-				break;
-			case 2:
-			default:
-				se_calc_sha256(&hashEm, bufEm, num << 9);
-				se_calc_sha256(&hashSd, bufSd, num << 9);
+				se_calc_sha256(hashEm, bufEm, num << 9);
+				se_calc_sha256(hashSd, bufSd, num << 9);
 				res = memcmp(hashEm, hashSd, 0x10);
-				break;
-			}
-			if (res)
-			{
-				gfx_con.fntsz = 16;
-				EPRINTFARGS("\nSD card and eMMC data (@LBA %08X),\ndo not match!\n\nVerification failed..\n", lba_curr);
 
-				free(bufEm);
-				free(bufSd);
-				f_close(&fp);
-				return 1;
+				if (res)
+				{
+					gfx_con.fntsz = 16;
+					EPRINTFARGS("\nSD and eMMC data (@LBA %08X),\ndo not match!\n\nVerification failed..\n", lba_curr);
+	
+					f_close(&fp);
+					return 1;
+				}
 			}
 
+			sparseShouldVerify++;
+			sdFileSector += NUM_SECTORS_PER_ITER;
+
 			pct = (u64)((u64)(lba_curr - part->lba_start) * 100u) / (u64)(part->lba_end - part->lba_start);
 			if (pct != prevPct)
 			{
@@ -138,19 +128,15 @@ static int _dump_emmc_verify(sdmmc_storage_t *storage, u32 lba_curr, char *outFi
 			if ((btn & BTN_VOL_DOWN) && (btn & BTN_VOL_UP))
 			{
 				gfx_con.fntsz = 16;
-				WPRINTF("\n\nThe verification was cancelled!");
-				EPRINTF("\nPress any key...\n");
-				msleep(1500);
+				WPRINTF("\n\nVerification was cancelled!");
+				gfx_con.fntsz = 8;
+				msleep(1000);
 
-				free(bufEm);
-				free(bufSd);
 				f_close(&fp);
 
 				return 0;
 			}
 		}
-		free(bufEm);
-		free(bufSd);
 		f_close(&fp);
 
 		tui_pbar(&gfx_con, 0, gfx_con.y, pct, 0xFFCCCCCC, 0xFF555555);
@@ -165,6 +151,17 @@ static int _dump_emmc_verify(sdmmc_storage_t *storage, u32 lba_curr, char *outFi
 	}
 }
 
+void _update_filename(char *outFilename, u32 sdPathLen, u32 numSplitParts, u32 currPartIdx)
+{
+	if (numSplitParts >= 10 && currPartIdx < 10)
+	{
+		outFilename[sdPathLen] = '0';
+		itoa(currPartIdx, &outFilename[sdPathLen + 1], 10);
+	}
+	else
+		itoa(currPartIdx, &outFilename[sdPathLen], 10);
+}
+
 static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t *part)
 {
 	static const u32 FAT32_FILESIZE_LIMIT = 0xFFFFFFFF;
@@ -195,7 +192,7 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 	if ((sd_storage.csd.capacity >> (20 - sd_storage.csd.read_blkbits)) <= 8192)
 		multipartSplitSize = (1u << 30);
 	// Maximum parts fitting the free space available.
-	maxSplitParts = (sd_fs.free_clst * sd_fs.csize) / (multipartSplitSize / 512);
+	maxSplitParts = (sd_fs.free_clst * sd_fs.csize) / (multipartSplitSize / NX_EMMC_BLOCKSIZE);
 
 	// Check if the USER partition or the RAW eMMC fits the sd card free space.
 	if (totalSectors > (sd_fs.free_clst * sd_fs.csize))
@@ -246,28 +243,8 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 
 		outFilename[sdPathLen++] = '.';
 
-		if (!partialDumpInProgress)
-		{
-			outFilename[sdPathLen] = '0';
-			if (numSplitParts >= 10)
-			{
-				outFilename[sdPathLen + 1] = '0';
-				outFilename[sdPathLen + 2] = 0;
-			}
-			else
-				outFilename[sdPathLen + 1] = 0;
-		}
 		// Continue from where we left, if Partial Backup in progress.
-		else
-		{
-			if (numSplitParts >= 10 && currPartIdx < 10)
-			{
-				outFilename[sdPathLen] = '0';
-				itoa(currPartIdx, &outFilename[sdPathLen + 1], 10);
-			}
-			else
-				itoa(currPartIdx, &outFilename[sdPathLen], 10);
-		}
+		_update_filename(outFilename, sdPathLen, numSplitParts, partialDumpInProgress ? currPartIdx : 0);
 	}
 
 	FIL fp;
@@ -276,7 +253,7 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 	{
 		f_close(&fp);
 		gfx_con.fntsz = 16;
-		
+
 		WPRINTF("An existing backup has been detected!");
 		WPRINTF("Press POWER to Continue.\nPress VOL to go to the menu.\n");
 		msleep(500);
@@ -297,12 +274,9 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 		return 0;
 	}
 
-	u32 numSectorsPerIter = 0;
-	if (totalSectors > 0x200000)
-		numSectorsPerIter = 8192;
-	else
-		numSectorsPerIter = 512;
-	u8 *buf = (u8 *)calloc(numSectorsPerIter, NX_EMMC_BLOCKSIZE);
+	const u32 NUM_SECTORS_PER_ITER = 8192;
+
+	u8 *buf = (u8 *)MIXD_BUF_ALIGNED;
 
 	u32 lba_curr = part->lba_start;
 	u32 lbaStartPart = part->lba_start;
@@ -341,18 +315,11 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 				{
 					EPRINTF("\nPress any key and try again...\n");
 
-					free(buf);
 					return 0;
 				}
 			}
 
-			if (numSplitParts >= 10 && currPartIdx < 10)
-			{
-				outFilename[sdPathLen] = '0';
-				itoa(currPartIdx, &outFilename[sdPathLen + 1], 10);
-			}
-			else
-				itoa(currPartIdx, &outFilename[sdPathLen], 10);
+			_update_filename(outFilename, sdPathLen, numSplitParts, currPartIdx);
 
 			// Always create partial.idx before next part, in case a fatal error occurs.
 			if (isSmallSdCard)
@@ -368,7 +335,6 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 					gfx_con.fntsz = 16;
 					EPRINTF("\nError creating partial.idx file.\n");
 
-					free(buf);
 					return 0;
 				}
 
@@ -382,7 +348,6 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 						4. Select the SAME option again to continue.\n");
 					gfx_con.fntsz = 16;
 
-					free(buf);
 					return 1;
 				}
 			}
@@ -397,7 +362,6 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 				gfx_con.fntsz = 16;
 				EPRINTFARGS("Error (%d) creating file %s.\n", res, outFilename);
 
-				free(buf);
 				return 0;
 			}
 			bytesWritten = 0;
@@ -408,7 +372,7 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 		}
 
 		retryCount = 0;
-		num = MIN(totalSectors, numSectorsPerIter);
+		num = MIN(totalSectors, NUM_SECTORS_PER_ITER);
 		while (!sdmmc_storage_read(storage, lba_curr, num, buf))
 		{
 			EPRINTFARGS("Error reading %d blocks @ LBA %08X,\nfrom eMMC (try %d), retrying...",
@@ -422,7 +386,6 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 					num, lba_curr);
 				EPRINTF("\nPress any key and try again...\n");
 
-				free(buf);
 				f_close(&fp);
 				f_unlink(outFilename);
 
@@ -436,7 +399,6 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 			EPRINTFARGS("\nFatal error (%d) when writing to SD Card", res);
 			EPRINTF("\nPress any key and try again...\n");
 
-			free(buf);
 			f_close(&fp);
 			f_unlink(outFilename);
 
@@ -468,7 +430,6 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 			EPRINTF("\nPress any key...\n");
 			msleep(1500);
 
-			free(buf);
 			f_close(&fp);
 			f_unlink(outFilename);
 
@@ -478,7 +439,6 @@ static int _dump_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t
 	tui_pbar(&gfx_con, 0, gfx_con.y, 100, 0xFFCCCCCC, 0xFF555555);
 
 	// Backup operation ended successfully.
-	free(buf);
 	f_close(&fp);
 
 	if (h_cfg.verification)
@@ -635,21 +595,77 @@ void dump_emmc_user()    { _dump_emmc_selected(PART_USER); }
 void dump_emmc_boot()    { _dump_emmc_selected(PART_BOOT); }
 void dump_emmc_rawnand() { _dump_emmc_selected(PART_RAW); }
 
-static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t *part)
+static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part_t *part, bool allow_multi_part)
 {
 	static const u32 SECTORS_TO_MIB_COEFF = 11;
 
 	u32 totalSectors = part->lba_end - part->lba_start + 1;
+	u32 currPartIdx = 0;
+	u32 numSplitParts = 0;
 	u32 lbaStartPart = part->lba_start;
 	int res = 0;
 	char *outFilename = sd_path;
-
+	u32 sdPathLen = strlen(sd_path);
+	u64 fileSize = 0;
+	u64 totalCheckFileSize = 0;
 	gfx_con.fntsz = 8;
 
 	FIL fp;
-	gfx_printf(&gfx_con, "\nFilename: %s\n", outFilename);
+	FILINFO fno;
+
+	gfx_con_getpos(&gfx_con, &gfx_con.savedx, &gfx_con.savedy);
+
+    bool use_multipart = false;
+
+	if (allow_multi_part)
+	{
+		// Check to see if there is a combined file and if so then use that.
+		if (f_stat(outFilename, &fno))
+		{
+			// If not, check if there are partial files and the total size matches.
+			gfx_printf(&gfx_con, "No single file, checking for part files...\n");
+
+			outFilename[sdPathLen++] = '.';
+
+			// Stat total size of the part files.
+			while ((u32)((u64)totalCheckFileSize >> (u64)9) != totalSectors)
+			{
+				_update_filename(outFilename, sdPathLen, 99, numSplitParts);
+
+				gfx_con_setpos(&gfx_con, gfx_con.savedx, gfx_con.savedy);
+				gfx_printf(&gfx_con, "\nFilename: %s\n", outFilename);
+
+				if (f_stat(outFilename, &fno))
+				{
+					WPRINTFARGS("Error (%d) file not found '%s'. Aborting...\n", res, outFilename);
+					return 0;
+				}
+				else
+					totalCheckFileSize += (u64)fno.fsize;
+
+				numSplitParts++;
+			}
+
+			gfx_printf(&gfx_con, "\n%X sectors total.\n", (u32)((u64)totalCheckFileSize >> (u64)9));
+
+			if ((u32)((u64)totalCheckFileSize >> (u64)9) != totalSectors)
+			{
+				gfx_con.fntsz = 16;
+				EPRINTF("Size of SD Card split backups does not match,\neMMC's selected part size.\n");
+
+				return 0;
+			}
+			else
+			{
+				use_multipart = true;
+				_update_filename(outFilename, sdPathLen, numSplitParts, 0);
+			}
+		}
+	}
 
 	res = f_open(&fp, outFilename, FA_READ);
+	gfx_con_setpos(&gfx_con, gfx_con.savedx, gfx_con.savedy);
+	gfx_printf(&gfx_con, "\nFilename: %s\n", outFilename);
 	if (res)
 	{
 		if (res != FR_NO_FILE)
@@ -660,8 +676,7 @@ static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part
 
 		return 0;
 	}
-	//TODO: Should we keep this check?
-	else if (((u32)((u64)f_size(&fp) >> (u64)9)) != totalSectors)
+	else if (!use_multipart && (((u32)((u64)f_size(&fp) >> (u64)9)) != totalSectors)) // Check total restore size vs emmc size.
 	{
 		gfx_con.fntsz = 16;
 		EPRINTF("Size of the SD Card backup does not match,\neMMC's selected part size.\n");
@@ -670,15 +685,15 @@ static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part
 		return 0;
 	}
 	else
-		gfx_printf(&gfx_con, "\nTotal restore size: %d MiB.\n\n", ((u32)((u64)f_size(&fp) >> (u64)9)) >> SECTORS_TO_MIB_COEFF);
+	{
+		fileSize = (u64)f_size(&fp);
+		gfx_printf(&gfx_con, "\nTotal restore size: %d MiB.\n\n",
+			(u32)((use_multipart ? (u64)totalCheckFileSize : fileSize) >> (u64)9) >> SECTORS_TO_MIB_COEFF);
+	}
 
-	u32 numSectorsPerIter = 0;
-	if (totalSectors > 0x200000)
-		numSectorsPerIter = 8192; //4MB Cache
-	else
-		numSectorsPerIter = 512;  //256KB Cache
+	const u32 NUM_SECTORS_PER_ITER = 8192; // 4MB Cache.
 
-	u8 *buf = (u8 *)calloc(numSectorsPerIter, NX_EMMC_BLOCKSIZE);
+	u8 *buf = (u8 *)MIXD_BUF_ALIGNED;
 
 	u32 lba_curr = part->lba_start;
 	u32 bytesWritten = 0;
@@ -687,10 +702,53 @@ static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part
 
 	u32 num = 0;
 	u32 pct = 0;
+
+	gfx_con_getpos(&gfx_con, &gfx_con.savedx, &gfx_con.savedy);
+
 	while (totalSectors > 0)
 	{
+		// If we have more than one part, check the size for the split parts and make sure that the bytes written is not more than that.
+		if (numSplitParts != 0 && bytesWritten >= fileSize)
+		{
+			// If we have more bytes written then close the file pointer and increase the part index we are using
+			f_close(&fp);
+			memset(&fp, 0, sizeof(fp));
+			currPartIdx++;
+
+			if (h_cfg.verification)
+			{
+				// Verify part.
+				if (_dump_emmc_verify(storage, lbaStartPart, outFilename, part))
+				{
+					EPRINTF("\nPress any key and try again...\n");
+
+					return 0;
+				}
+			}
+
+			_update_filename(outFilename, sdPathLen, numSplitParts, currPartIdx);
+
+			// Read from next part.
+			gfx_con_setpos(&gfx_con, gfx_con.savedx, gfx_con.savedy);
+			gfx_printf(&gfx_con, "Filename: %s\n\n", outFilename);
+
+			lbaStartPart = lba_curr;
+
+			// Try to open the next file part
+			res = f_open(&fp, outFilename, FA_READ);
+			if (res)
+			{
+				gfx_con.fntsz = 16;
+				EPRINTFARGS("Error (%d) opening file %s.\n", res, outFilename);
+
+				return 0;
+			}
+			fileSize = (u64)f_size(&fp);
+			bytesWritten = 0;
+		}
+
 		retryCount = 0;
-		num = MIN(totalSectors, numSectorsPerIter);
+		num = MIN(totalSectors, NUM_SECTORS_PER_ITER);
 
 		res = f_read(&fp, buf, NX_EMMC_BLOCKSIZE * num, NULL);
 		if (res)
@@ -699,7 +757,6 @@ static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part
 			EPRINTFARGS("\nFatal error (%d) when reading from SD Card", res);
 			EPRINTF("\nYour device may be in an inoperative state!\n\nPress any key and try again now...\n");
 
-			free(buf);
 			f_close(&fp);
 			return 0;
 		}
@@ -716,7 +773,6 @@ static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part
 					num, lba_curr);
 				EPRINTF("\nYour device may be in an inoperative state!\n\nPress any key and try again...\n");
 
-				free(buf);
 				f_close(&fp);
 				return 0;
 			}
@@ -735,7 +791,6 @@ static int _restore_emmc_part(char *sd_path, sdmmc_storage_t *storage, emmc_part
 	tui_pbar(&gfx_con, 0, gfx_con.y, 100, 0xFFCCCCCC, 0xFF555555);
 
 	// Restore operation ended successfully.
-	free(buf);
 	f_close(&fp);
 
 	if (h_cfg.verification)
@@ -765,7 +820,7 @@ static void _restore_emmc_selected(emmcPartType_t restoreType)
 	tui_sbar(&gfx_con, true);
 	gfx_con_setpos(&gfx_con, 0, 0);
 
-	gfx_printf(&gfx_con, "%kThis is a dangerous operation\nand may render your device inoperative!\n\n", 0xFFFFDD00);
+	gfx_printf(&gfx_con, "%kThis may render your device inoperative!\n\n", 0xFFFFDD00);
 	gfx_printf(&gfx_con, "Are you really sure?\n\n%k", 0xFFCCCCCC);
 	if ((restoreType & PART_BOOT) || (restoreType & PART_GP_ALL))
 	{
@@ -777,13 +832,13 @@ static void _restore_emmc_selected(emmcPartType_t restoreType)
 	}
 	gfx_con_getpos(&gfx_con, &gfx_con.savedx, &gfx_con.savedy);
 
-	u8 value = 10;
-	while (value > 0)
+	u8 failsafe_wait = 10;
+	while (failsafe_wait > 0)
 	{
 		gfx_con_setpos(&gfx_con, gfx_con.savedx, gfx_con.savedy);
-		gfx_printf(&gfx_con, "%kWait... (%ds)    %k", 0xFF888888, value, 0xFFCCCCCC);
+		gfx_printf(&gfx_con, "%kWait... (%ds)    %k", 0xFF888888, failsafe_wait, 0xFFCCCCCC);
 		msleep(1000);
-		value--;
+		failsafe_wait--;
 	}
 	gfx_con_setpos(&gfx_con, gfx_con.savedx, gfx_con.savedy);
 
@@ -828,7 +883,7 @@ static void _restore_emmc_selected(emmcPartType_t restoreType)
 			sdmmc_storage_set_mmc_partition(&storage, i + 1);
 
 			emmcsn_path_impl(sdPath, "/restore", bootPart.name, &storage);
-			res = _restore_emmc_part(sdPath, &storage, &bootPart);
+			res = _restore_emmc_part(sdPath, &storage, &bootPart, false);
 		}
 	}
 
@@ -844,7 +899,7 @@ static void _restore_emmc_selected(emmcPartType_t restoreType)
 				part->name, part->lba_start, part->lba_end, 0xFFCCCCCC);
 
 			emmcsn_path_impl(sdPath, "/restore/partitions/", part->name, &storage);
-			res = _restore_emmc_part(sdPath, &storage, part);
+			res = _restore_emmc_part(sdPath, &storage, part, false);
 		}
 		nx_emmc_gpt_free(&gpt);
 	}
@@ -864,7 +919,7 @@ static void _restore_emmc_selected(emmcPartType_t restoreType)
 				rawPart.name, rawPart.lba_start, rawPart.lba_end, 0xFFCCCCCC);
 
 			emmcsn_path_impl(sdPath, "/restore", rawPart.name, &storage);
-			res = _restore_emmc_part(sdPath, &storage, &rawPart);
+			res = _restore_emmc_part(sdPath, &storage, &rawPart, true);
 		}
 	}
 

bootloader/frontend/fe_info.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  * Copyright (c) 2018 balika011
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -38,8 +38,6 @@
 #include "../utils/btn.h"
 #include "../utils/util.h"
 
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
 extern sdmmc_storage_t sd_storage;
 extern FATFS sd_fs;
 
@@ -48,15 +46,6 @@ extern void sd_unmount();
 extern int  sd_save_to_file(void *buf, u32 size, const char *filename);
 extern void emmcsn_path_impl(char *path, char *sub_dir, char *filename, sdmmc_storage_t *storage);
 
-//TODO: Create more macros (info, header, debug, etc) with different colors and utilize them for consistency.
-#define EPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, 0xFFCCCCCC)
-#define EPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, args, 0xFFCCCCCC)
-#define WPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, 0xFFCCCCCC)
-#define WPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, args, 0xFFCCCCCC)
-
-#pragma GCC push_options
-#pragma GCC optimize ("Os")
-
 void print_fuseinfo()
 {
 	gfx_clear_partial_grey(&gfx_ctxt, 0x1B, 0, 1256);
@@ -88,7 +77,7 @@ void print_fuseinfo()
 	gfx_printf(&gfx_con, "%k(Unlocked) fuse cache:\n\n%k", 0xFF00DDFF, 0xFFCCCCCC);
 	gfx_hexdump(&gfx_con, 0x7000F900, (u8 *)0x7000F900, 0x2FC);
 
-	gfx_puts(&gfx_con, "Press POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");
+	gfx_puts(&gfx_con, "\nPress POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");
 
 	u32 btn = btn_wait();
 	if (btn & BTN_POWER)
@@ -352,7 +341,6 @@ void print_tsec_key()
 	gfx_con_setpos(&gfx_con, 0, 0);
 
 	u32 retries = 0;
-	u32 key_ver_max = 3;
 
 	tsec_ctxt_t tsec_ctxt;
 	sdmmc_storage_t storage;
@@ -368,85 +356,70 @@ void print_tsec_key()
 	const pkg1_id_t *pkg1_id = pkg1_identify(pkg1);
 	if (!pkg1_id)
 	{
-		EPRINTFARGS("Unknown package1 version for reading\nTSEC firmware (= '%s').",
-			(char *)pkg1 + 0x10);
+		EPRINTF("Unknown pkg1 version for reading\nTSEC firmware.");
 		goto out_wait;
 	}
 
-	u8 keys[0x10 * 3];
+	u8 keys[0x10 * 2];
+	memset(keys, 0x00, 0x20);
 
-	tsec_ctxt.size = 0xF00;
 	tsec_ctxt.fw = (u8 *)pkg1 + pkg1_id->tsec_off;
 	tsec_ctxt.pkg1 = pkg1;
 	tsec_ctxt.pkg11_off = pkg1_id->pkg11_off;
 	tsec_ctxt.secmon_base = pkg1_id->secmon_base;
 
-	if (pkg1_id->kb >= KB_FIRMWARE_VERSION_620)
-	{
+	if (pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
+		tsec_ctxt.size = 0xF00;
+	else if (pkg1_id->kb == KB_FIRMWARE_VERSION_620)
 		tsec_ctxt.size = 0x2900;
+	else
+	{
+		tsec_ctxt.size = 0x3000;
+		// Exit after TSEC key generation.
+		*((vu16 *)((u32)tsec_ctxt.fw + 0x2DB5)) = 0x02F8;
+	}
+
+	if (pkg1_id->kb == KB_FIRMWARE_VERSION_620)
+	{
 		u8 *tsec_paged = (u8 *)page_alloc(3);
 		memcpy(tsec_paged, (void *)tsec_ctxt.fw, tsec_ctxt.size);
 		tsec_ctxt.fw = tsec_paged;
-
-		key_ver_max = 1;
 	}
 
-	for (u32 i = 1; i <= key_ver_max; i++)
+	int res = 0;
+
+	while (tsec_query(keys, pkg1_id->kb, &tsec_ctxt) < 0)
 	{
-		tsec_ctxt.key_ver = i;
-		int res = 0;
+		memset(keys, 0x00, 0x20);
 
-		while (tsec_query(keys + ((i - 1) * 0x10), pkg1_id->kb, &tsec_ctxt) < 0)
+		retries++;
+
+		if (retries > 3)
 		{
-			if (pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
-				memset(keys + ((i - 1) * 0x10), 0x00, 0x10);
-			else
-				memset(keys, 0x00, 0x30);
-
-			retries++;
-
-			if (retries > 3)
-			{
-				res = -1;
-				break;
-			}
+			res = -1;
+			break;
 		}
-
-		if (pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
-		{
-			gfx_printf(&gfx_con, "%kTSEC key %d: %k", 0xFF00DDFF, i, 0xFFCCCCCC);
-
-			if (res >= 0)
-			{
-				for (u32 j = 0; j < 0x10; j++)
-					gfx_printf(&gfx_con, "%02X", keys[((i - 1) * 0x10) + j]);
-			}
-			else
-				EPRINTFARGS("ERROR %X", res);
-			gfx_putc(&gfx_con, '\n');
-		}
-		else
-		{
-			gfx_printf(&gfx_con, "%kTSEC key:  %k", 0xFF00DDFF, 0xFFCCCCCC);
-
-			if (res >= 0)
-			{
-				for (u32 j = 0; j < 0x10; j++)
-					gfx_printf(&gfx_con, "%02X", keys[j]);
-				gfx_putc(&gfx_con, '\n');
-
-				gfx_printf(&gfx_con, "%kTSEC root: %k", 0xFF00DDFF, 0xFFCCCCCC);
-				for (u32 j = 0; j < 0x10; j++)
-					gfx_printf(&gfx_con, "%02X", keys[0x10 + j]);
-			}
-			else
-				EPRINTFARGS("ERROR %X", res);
-			gfx_putc(&gfx_con, '\n');
-		}
-		
 	}
 
-	gfx_puts(&gfx_con, "\nPress POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");
+	gfx_printf(&gfx_con, "%kTSEC key:  %k", 0xFF00DDFF, 0xFFCCCCCC);
+
+	if (res >= 0)
+	{
+		for (u32 j = 0; j < 0x10; j++)
+			gfx_printf(&gfx_con, "%02X", keys[j]);
+		
+
+		if (pkg1_id->kb == KB_FIRMWARE_VERSION_620)
+		{
+			gfx_printf(&gfx_con, "\n%kTSEC root: %k", 0xFF00DDFF, 0xFFCCCCCC);
+			for (u32 j = 0; j < 0x10; j++)
+				gfx_printf(&gfx_con, "%02X", keys[0x10 + j]);
+		}
+	}
+	else
+		EPRINTFARGS("ERROR %X\n", res);
+
+	gfx_puts(&gfx_con, "\n\nPress POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");
 
 	u32 btn = btn_wait();
 	if (btn & BTN_POWER)
@@ -455,7 +428,7 @@ void print_tsec_key()
 		{
 			char path[64];
 			emmcsn_path_impl(path, "/dumps", "tsec_keys.bin", NULL);
-			if (!sd_save_to_file(keys, 0x10 * 3, path))
+			if (!sd_save_to_file(keys, 0x10 * 2, path))
 				gfx_puts(&gfx_con, "\nDone!\n");
 			sd_unmount();
 		}
@@ -707,6 +680,3 @@ void bootrom_ipatches_info()
 		btn_wait();
 	}
 }
-
-#pragma GCC pop_options
-

bootloader/frontend/fe_tools.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  * Copyright (c) 2018 Reisyukaku
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -26,6 +26,7 @@
 #include "../hos/hos.h"
 #include "../hos/pkg1.h"
 #include "../hos/pkg2.h"
+#include "../hos/sept.h"
 #include "../libs/fatfs/ff.h"
 #include "../mem/heap.h"
 #include "../power/max7762x.h"
@@ -35,20 +36,14 @@
 #include "../utils/btn.h"
 #include "../utils/util.h"
 
+extern boot_cfg_t b_cfg;
 extern hekate_config h_cfg;
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
-extern sdmmc_storage_t sd_storage;
 
 extern bool sd_mount();
 extern void sd_unmount();
 extern int  sd_save_to_file(void *buf, u32 size, const char *filename);
 extern void emmcsn_path_impl(char *path, char *sub_dir, char *filename, sdmmc_storage_t *storage);
 
-//TODO: Create more macros (info, header, debug, etc) with different colors and utilize them for consistency.
-#define EPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, 0xFFCCCCCC)
-#define EPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, args, 0xFFCCCCCC)
-
 void dump_packages12()
 {
 	if (!sd_mount())
@@ -82,20 +77,34 @@ void dump_packages12()
 	if (!pkg1_id)
 	{
 		gfx_con.fntsz = 8;
-		EPRINTFARGS("Unknown package1 version for reading\nTSEC firmware (= '%s').", (char *)pkg1 + 0x10);
+		EPRINTF("Unknown pkg1 version for reading\nTSEC firmware.");
 		goto out_free;
 	}
 
 	kb = pkg1_id->kb;
 
-	if (!h_cfg.se_keygen_done || kb >= KB_FIRMWARE_VERSION_620)
+	if (!h_cfg.se_keygen_done || kb == KB_FIRMWARE_VERSION_620)
 	{
-		tsec_ctxt.key_ver = 1;
 		tsec_ctxt.fw = (void *)pkg1 + pkg1_id->tsec_off;
 		tsec_ctxt.pkg1 = (void *)pkg1;
 		tsec_ctxt.pkg11_off = pkg1_id->pkg11_off;
 		tsec_ctxt.secmon_base = pkg1_id->secmon_base;
 
+		if (kb >= KB_FIRMWARE_VERSION_700 && !h_cfg.sept_run)
+		{
+			b_cfg.autoboot = 0;
+			b_cfg.autoboot_list = 0;
+
+			gfx_printf(&gfx_con, "sept will run to get the keys.\nThen rerun this option.");
+			btn_wait();
+
+			if (!reboot_to_sept((u8 *)tsec_ctxt.fw))
+			{
+				gfx_printf(&gfx_con, "Failed to run sept\n");
+				goto out_free;
+			}
+		}
+
 		// Read keyblob.
 		u8 *keyblob = (u8 *)calloc(NX_EMMC_BLOCKSIZE, 1);
 		sdmmc_storage_read(&storage, 0x180000 / NX_EMMC_BLOCKSIZE + kb, 1, keyblob);
@@ -110,41 +119,45 @@ void dump_packages12()
 	if (kb <= KB_FIRMWARE_VERSION_600)
 		pkg1_decrypt(pkg1_id, pkg1);
 
-	pkg1_unpack(warmboot, secmon, loader, pkg1_id, pkg1);
-
-	// Display info.
-	gfx_printf(&gfx_con, "%kNX Bootloader size:  %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->ldr_size);
-
-	gfx_printf(&gfx_con, "%kSecure monitor addr: %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->secmon_base);
-	gfx_printf(&gfx_con, "%kSecure monitor size: %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->sm_size);
-
-	gfx_printf(&gfx_con, "%kWarmboot addr:       %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->warmboot_base);
-	gfx_printf(&gfx_con, "%kWarmboot size:       %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->wb_size);
-
 	char path[64];
-	// Dump package1.1.
-	emmcsn_path_impl(path, "/pkg1", "pkg1_decr.bin", &storage);
-	if (sd_save_to_file(pkg1, 0x40000, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "\nFull package1 dumped to pkg1_decr.bin\n");
 
-	// Dump nxbootloader.
-	emmcsn_path_impl(path, "/pkg1", "nxloader.bin", &storage);
-	if (sd_save_to_file(loader, hdr->ldr_size, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "NX Bootloader dumped to nxloader.bin\n");
+	if (kb <= KB_FIRMWARE_VERSION_620)
+	{
+		pkg1_unpack(warmboot, secmon, loader, pkg1_id, pkg1);
+	
+		// Display info.
+		gfx_printf(&gfx_con, "%kNX Bootloader size:  %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->ldr_size);
+	
+		gfx_printf(&gfx_con, "%kSecure monitor addr: %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->secmon_base);
+		gfx_printf(&gfx_con, "%kSecure monitor size: %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->sm_size);
+	
+		gfx_printf(&gfx_con, "%kWarmboot addr:       %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->warmboot_base);
+		gfx_printf(&gfx_con, "%kWarmboot size:       %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->wb_size);
 
-	// Dump secmon.
-	emmcsn_path_impl(path, "/pkg1", "secmon.bin", &storage);
-	if (sd_save_to_file(secmon, hdr->sm_size, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "Secure Monitor dumped to secmon.bin\n");
-
-	// Dump warmboot.
-	emmcsn_path_impl(path, "/pkg1", "warmboot.bin", &storage);
-	if (sd_save_to_file(warmboot, hdr->wb_size, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "Warmboot dumped to warmboot.bin\n\n\n");
+		// Dump package1.1.
+		emmcsn_path_impl(path, "/pkg1", "pkg1_decr.bin", &storage);
+		if (sd_save_to_file(pkg1, 0x40000, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "\npkg1 dumped to pkg1_decr.bin\n");
+	
+		// Dump nxbootloader.
+		emmcsn_path_impl(path, "/pkg1", "nxloader.bin", &storage);
+		if (sd_save_to_file(loader, hdr->ldr_size, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "NX Bootloader dumped to nxloader.bin\n");
+	
+		// Dump secmon.
+		emmcsn_path_impl(path, "/pkg1", "secmon.bin", &storage);
+		if (sd_save_to_file(secmon, hdr->sm_size, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "Secure Monitor dumped to secmon.bin\n");
+	
+		// Dump warmboot.
+		emmcsn_path_impl(path, "/pkg1", "warmboot.bin", &storage);
+		if (sd_save_to_file(warmboot, hdr->wb_size, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "Warmboot dumped to warmboot.bin\n\n\n");
+	}
 
 	// Dump package2.1.
 	sdmmc_storage_set_mmc_partition(&storage, 0);
@@ -180,7 +193,7 @@ void dump_packages12()
 	emmcsn_path_impl(path, "/pkg2", "pkg2_decr.bin", &storage);
 	if (sd_save_to_file(pkg2, pkg2_hdr->sec_size[PKG2_SEC_KERNEL] + pkg2_hdr->sec_size[PKG2_SEC_INI1], path))
 		goto out;
-	gfx_puts(&gfx_con, "\nFull package2 dumped to pkg2_decr.bin\n");
+	gfx_puts(&gfx_con, "\npkg2 dumped to pkg2_decr.bin\n");
 
 	// Dump kernel.
 	emmcsn_path_impl(path, "/pkg2", "kernel.bin", &storage);
@@ -193,7 +206,7 @@ void dump_packages12()
 	if (sd_save_to_file(pkg2_hdr->data + pkg2_hdr->sec_size[PKG2_SEC_KERNEL],
 		pkg2_hdr->sec_size[PKG2_SEC_INI1], path))
 		goto out;
-	gfx_puts(&gfx_con, "INI1 kip1 package dumped to ini1.bin\n");
+	gfx_puts(&gfx_con, "INI1 dumped to ini1.bin\n");
 
 	gfx_puts(&gfx_con, "\nDone. Press any key...\n");
 
@@ -430,7 +443,7 @@ void _fix_sd_attr(u32 type)
 			break;
 		}
 
-		gfx_printf(&gfx_con, "Traversing all %s files!\nThis may take some time, please wait...\n\n", label);
+		gfx_printf(&gfx_con, "Traversing all %s files!\nThis may take some time...\n\n", label);
 		_fix_attributes(path, &total, type, type);
 		gfx_printf(&gfx_con, "%kTotal archive bits cleared: %d!%k\n\nDone! Press any key...", 0xFF96FF00, total, 0xFFCCCCCC);
 		sd_unmount();
@@ -553,10 +566,10 @@ void fix_battery_desync()
 }*/
 
 /*
-#include "../modules/hekate_libsys_minerva/mtc.h"
+#include "../../modules/hekate_libsys_minerva/mtc.h"
 #include "../ianos/ianos.h"
 #include "../soc/fuse.h"
-mtc_config_t mtc_cfg;
+#include "../soc/clock.h"
 
 void minerva()
 {

bootloader/gfx/di.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (C) 2018 CTCaer
+ * Copyright (c) 2018 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -23,6 +23,7 @@
 #include "../soc/i2c.h"
 #include "../soc/pmc.h"
 #include "../power/max77620.h"
+#include "../power/max7762x.h"
 #include "../soc/gpio.h"
 #include "../soc/pinmux.h"
 #include "../soc/clock.h"
@@ -42,8 +43,8 @@ static void _display_dsi_wait(u32 timeout, u32 off, u32 mask)
 void display_init()
 {
 	// Power on.
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_LDO0_CFG, 0xD0); // Configure to 1.2V.
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO7, 0x09);
+	max77620_regulator_set_volt_and_flags(REGULATOR_LDO0, 1200000, MAX77620_POWER_MODE_NORMAL); // Configure to 1.2V.
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO7, MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH | MAX77620_CNFG_GPIO_DRV_PUSHPULL);
 
 	// Enable MIPI CAL, DSI, DISP1, HOST1X, UART_FST_MIPI_CAL, DSIA LP clocks.
 	CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x1010000;

bootloader/gfx/gfx.h

@@ -21,6 +21,11 @@
 
 #include "../../common/common_gfx.h"
 
+#define EPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, 0xFFCCCCCC)
+#define EPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, args, 0xFFCCCCCC)
+#define WPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, 0xFFCCCCCC)
+#define WPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, args, 0xFFCCCCCC)
+
 void gfx_init_ctxt(gfx_ctxt_t *ctxt, u32 *fb, u32 width, u32 height, u32 stride);
 void gfx_clear_grey(gfx_ctxt_t *ctxt, u8 color);
 void gfx_clear_partial_grey(gfx_ctxt_t *ctxt, u8 color, u32 pos_x, u32 height);
@@ -43,4 +48,8 @@ void gfx_set_rect_rgb(gfx_ctxt_t *ctxt, const u8 *buf, u32 size_x, u32 size_y, u
 void gfx_set_rect_argb(gfx_ctxt_t *ctxt, const u32 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y);
 void gfx_render_bmp_argb(gfx_ctxt_t *ctxt, const u32 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y);
 
+// Global gfx console and context.
+gfx_ctxt_t gfx_ctxt;
+gfx_con_t gfx_con;
+
 #endif

bootloader/hos/fss.c

@@ -0,0 +1,144 @@
+/*
+ * Atmosphère Fusée Secondary Storage parser.
+ *
+ * Copyright (c) 2019 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <string.h>
+
+#include "fss.h"
+#include "hos.h"
+#include "../libs/fatfs/ff.h"
+#include "../mem/heap.h"
+
+#include "../gfx/gfx.h"
+#define DPRINTF(...)
+
+#define FSS0_MAGIC 0x30535346
+#define CNT_TYPE_FSP 0
+#define CNT_TYPE_EXO 1
+#define CNT_TYPE_WBT 2
+#define CNT_TYPE_RBT 3
+#define CNT_TYPE_SP1 4
+#define CNT_TYPE_SP2 5
+#define CNT_TYPE_KIP 6
+#define CNT_TYPE_BMP 7
+
+typedef struct _fss_t
+{
+	u32 magic;
+	u32 size;
+	u32 crt0_off;
+	u32 cnt_off;
+	u32 cnt_count;
+	u32 hos_ver;
+	u32 version;
+	u32 git_rev;
+} fss_t;
+
+typedef struct _fss_content_t
+{
+	u32 offset;
+	u32 size;
+	u32 type;
+	u32 rsvd1;
+	char name[0x10];
+} fss_content_t;
+
+int parse_fss(launch_ctxt_t *ctxt, const char *value)
+{
+	FIL fp;
+
+	bool stock = false;
+
+	LIST_FOREACH_ENTRY(ini_kv_t, kv, &ctxt->cfg->kvs, link)
+	{
+		if (!strcmp("stock", kv->key))
+			if (kv->val[0] == '1')
+				stock = true;
+	}
+
+	if (stock && ctxt->pkg1_id->kb <= KB_FIRMWARE_VERSION_620)
+		return 1;
+
+	if (f_open(&fp, value, FA_READ) != FR_OK)
+		return 0;
+
+	ctxt->atmosphere = true;
+
+	void *fss = malloc(f_size(&fp));
+	// Read header.
+	f_read(&fp, fss, 0x400, NULL);
+
+	u32 fss_entry = *(u32 *)(fss + 4);
+	fss_t *fss_meta = (fss_t *)(fss + fss_entry);
+
+	if (fss_meta->magic == FSS0_MAGIC)
+	{
+		gfx_printf(&gfx_con, "Found FSS0, Atmosphere %d.%d.%d-%08x\n"
+			"Max HOS supported: %d.%d.%d\n"
+			"Unpacking and loading components..  ",
+			fss_meta->version >> 24, (fss_meta->version >> 16) & 0xFF, (fss_meta->version >> 8) & 0xFF, fss_meta->git_rev,
+			fss_meta->hos_ver >> 24, (fss_meta->hos_ver >> 16) & 0xFF, (fss_meta->hos_ver >> 8) & 0xFF);
+
+		fss_content_t *curr_fss_cnt = (fss_content_t *)(fss + fss_meta->cnt_off);
+		void *content;
+		for (int i = 0; i < fss_meta->cnt_count; i++)
+		{
+			content = (void *)(fss + curr_fss_cnt[i].offset);
+			if ((curr_fss_cnt[i].offset + curr_fss_cnt[i].size) > fss_meta->size)
+				continue;
+
+			// Load content to launch context.
+			switch (curr_fss_cnt[i].type)
+			{
+			case CNT_TYPE_KIP:
+				if (stock)
+					continue;
+				merge_kip_t *mkip1 = (merge_kip_t *)malloc(sizeof(merge_kip_t));
+				mkip1->kip1 = content;
+				list_append(&ctxt->kip1_list, &mkip1->link);
+				DPRINTF("Loaded %s.kip1 from FSS0 (size %08X)\n", curr_fss_cnt[i].name, curr_fss_cnt[i].size);
+				break;
+			case CNT_TYPE_EXO:
+				ctxt->secmon_size = curr_fss_cnt[i].size;
+				ctxt->secmon = content;
+				break;
+			case CNT_TYPE_WBT:
+				ctxt->warmboot_size = curr_fss_cnt[i].size;
+				ctxt->warmboot = content;
+				break;
+			default:
+				continue;
+			// TODO: add more types?
+			// case CNT_TYPE_SP1:
+			// case CNT_TYPE_SP2:
+			}
+
+			f_lseek(&fp, curr_fss_cnt[i].offset);
+			f_read(&fp, content, curr_fss_cnt[i].size, NULL);
+		}
+
+		gfx_printf(&gfx_con, "Done!\n");
+		f_close(&fp);
+
+		return 1;
+	}
+
+	f_close(&fp);
+	free(fss);
+
+	return 0;
+}

bootloader/hos/fss.h

@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2019 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _FSS_H_
+#define _FSS_H_
+
+#include "hos.h"
+
+int parse_fss(launch_ctxt_t *ctxt, const char *value);
+
+#endif

bootloader/hos/hos.c

@@ -2,7 +2,7 @@
  * Copyright (c) 2018 naehrwert
  * Copyright (c) 2018 st4rk
  * Copyright (c) 2018 Ced2911
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  * Copyright (c) 2018 balika011
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -22,6 +22,7 @@
 
 #include "hos.h"
 #include "hos_config.h"
+#include "sept.h"
 #include "secmon_exo.h"
 #include "../config/config.h"
 #include "../gfx/di.h"
@@ -38,10 +39,7 @@
 #include "../storage/nx_emmc.h"
 #include "../storage/sdmmc.h"
 #include "../utils/util.h"
-
 #include "../gfx/gfx.h"
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
 
 extern hekate_config h_cfg;
 
@@ -50,6 +48,20 @@ extern void sd_unmount();
 //#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)
 #define DPRINTF(...)
 
+#define PKG2_LOAD_ADDR 0xA9800000
+
+ // Secmon mailbox.
+#define SECMON_MB_ADDR  0x40002EF8
+#define SECMON7_MB_ADDR 0x400000F8
+typedef struct _secmon_mailbox_t
+{
+	//  < 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM and pkg2 ready, 3: Continue boot.
+	// >= 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM ready, 4: pkg2 ready and continue boot.
+	u32 in;
+	// Non-zero: Secmon ready.
+	u32 out;
+} secmon_mailbox_t;
+
 static const u8 keyblob_keyseeds[][0x10] = {
 	{ 0xDF, 0x20, 0x6F, 0x59, 0x44, 0x54, 0xEF, 0xDC, 0x70, 0x74, 0x48, 0x3B, 0x0D, 0xED, 0x9F, 0xD3 }, //1.0.0
 	{ 0x0C, 0x25, 0x61, 0x5D, 0x68, 0x4C, 0xEB, 0x42, 0x1C, 0x23, 0x79, 0xEA, 0x82, 0x25, 0x12, 0xAC }, //3.0.0
@@ -68,7 +80,7 @@ static const u8 master_keyseed_retail[0x10] =
 static const u8 console_keyseed[0x10] =
 	{ 0x4F, 0x02, 0x5F, 0x0E, 0xB6, 0x6D, 0x11, 0x0E, 0xDC, 0x32, 0x7D, 0x41, 0x86, 0xC2, 0xF4, 0x78 };
 
-static const u8 key8_keyseed[] =
+static const u8 package2_keyseed[] =
 	{ 0xFB, 0x8B, 0x6A, 0x9C, 0x79, 0x00, 0xC8, 0x49, 0xEF, 0xD2, 0x4D, 0x85, 0x4D, 0x30, 0xA0, 0xC7 };
 
 static const u8 master_keyseed_4xx_5xx_610[0x10] = 
@@ -129,9 +141,7 @@ void _pmc_scratch_lock(u32 kb)
 		PMC(APBDEV_PMC_SEC_DISABLE7) = 0xFFFFFFFF;
 		PMC(APBDEV_PMC_SEC_DISABLE8) = 0xFFAAFFFF;
 		break;
-	case KB_FIRMWARE_VERSION_400:
-	case KB_FIRMWARE_VERSION_500:
-	case KB_FIRMWARE_VERSION_600:
+	default:
 		PMC(APBDEV_PMC_SEC_DISABLE2) |= 0x3FCFFFF;
 	    PMC(APBDEV_PMC_SEC_DISABLE4) |= 0x3F3FFFFF;
 	    PMC(APBDEV_PMC_SEC_DISABLE5)  = 0xFFFFFFFF;
@@ -165,34 +175,44 @@ int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt)
 	u8 tmp[0x20];
 	u32 retries = 0;
 
-	tsec_ctxt->size = 0xF00;
-
 	if (kb > KB_FIRMWARE_VERSION_MAX)
 		return 0;
 
-	// Get TSEC key.
-	if (kb >= KB_FIRMWARE_VERSION_620)
-	{
+	if (kb <= KB_FIRMWARE_VERSION_600)
+		tsec_ctxt->size = 0xF00;
+	else if (kb == KB_FIRMWARE_VERSION_620)
 		tsec_ctxt->size = 0x2900;
+	else
+		tsec_ctxt->size = 0x3000;
+
+	// Prepare smmu tsec page for 6.2.0.
+	if (kb == KB_FIRMWARE_VERSION_620)
+	{
 		u8 *tsec_paged = (u8 *)page_alloc(3);
 		memcpy(tsec_paged, (void *)tsec_ctxt->fw, tsec_ctxt->size);
 		tsec_ctxt->fw = tsec_paged;
 	}
 
-	while (tsec_query(tmp, kb, tsec_ctxt) < 0)
+	// Get TSEC key.
+	if (kb <= KB_FIRMWARE_VERSION_620)
 	{
-		memset(tmp, 0x00, 0x20);
-		retries++;
-
-		// We rely on racing conditions, make sure we cover even the unluckiest cases.
-		if (retries > 15)
+		while (tsec_query(tmp, kb, tsec_ctxt) < 0)
 		{
-			gfx_printf(&gfx_con, "%k\nFailed to get TSEC keys. Please try again.%k\n\n", 0xFFFF0000, 0xFFCCCCCC);
-			return 0;
+			memset(tmp, 0x00, 0x20);
+			retries++;
+
+			// We rely on racing conditions, make sure we cover even the unluckiest cases.
+			if (retries > 15)
+			{
+				EPRINTF("\nFailed to get TSEC keys. Please try again.\n");
+				return 0;
+			}
 		}
 	}
 
-	if (kb >= KB_FIRMWARE_VERSION_620)
+	if (kb >= KB_FIRMWARE_VERSION_700)
+		se_aes_unwrap_key(8, 12, package2_keyseed);
+	else if (kb == KB_FIRMWARE_VERSION_620)
 	{
 		// Set TSEC key.
 		se_aes_key_set(12, tmp, 0x10);
@@ -203,7 +223,7 @@ int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt)
 		se_aes_key_set(8, tmp + 0x10, 0x10);
 		se_aes_unwrap_key(8, 8, master_keyseed_620);
 		se_aes_unwrap_key(8, 8, master_keyseed_retail);
-		se_aes_unwrap_key(8, 8, key8_keyseed);
+		se_aes_unwrap_key(8, 8, package2_keyseed);
 	}
 	else
 	{
@@ -264,7 +284,7 @@ int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt)
 
 		// Package2 key.
 		se_key_acc_ctrl(8, 0x15);
-		se_aes_unwrap_key(8, 12, key8_keyseed);
+		se_aes_unwrap_key(8, 12, package2_keyseed);
 	}
 
 	return 1;
@@ -285,10 +305,10 @@ static int _read_emmc_pkg1(launch_ctxt_t *ctxt)
 	ctxt->pkg1_id = pkg1_identify(ctxt->pkg1);
 	if (!ctxt->pkg1_id)
 	{
-		gfx_printf(&gfx_con, "%kUnknown pkg1,\nVersion (= '%s').%k\n", 0xFFFF0000, (char *)ctxt->pkg1 + 0x10, 0xFFCCCCCC);
+		EPRINTF("Unknown pkg1 version.");
 		goto out;
 	}
-	gfx_printf(&gfx_con, "Identified pkg1 ('%s'),\nKeyblob version %d\n\n", (char *)(ctxt->pkg1 + 0x10), ctxt->pkg1_id->kb);
+	gfx_printf(&gfx_con, "Identified pkg1 and Keyblob %d\n\n", ctxt->pkg1_id->kb);
 
 	// Read the correct keyblob.
 	ctxt->keyblob = (u8 *)calloc(NX_EMMC_BLOCKSIZE, 1);
@@ -349,6 +369,7 @@ out:;
 
 static void _free_launch_components(launch_ctxt_t *ctxt)
 {
+	ini_free_section(ctxt->cfg);
 	free(ctxt->keyblob);
 	free(ctxt->pkg1);
 	free(ctxt->pkg2);
@@ -362,35 +383,51 @@ int hos_launch(ini_sec_t *cfg)
 {
 	launch_ctxt_t ctxt;
 	tsec_ctxt_t tsec_ctxt;
+	volatile secmon_mailbox_t *secmon_mb;
 
 	memset(&ctxt, 0, sizeof(launch_ctxt_t));
+	memset(&tsec_ctxt, 0, sizeof(tsec_ctxt_t));
 	list_init(&ctxt.kip1_list);
 
+	ctxt.cfg = cfg;
+
 	if (!gfx_con.mute)
 		gfx_clear_grey(&gfx_ctxt, 0x1B);
 	gfx_con_setpos(&gfx_con, 0, 0);
 
-	// Try to parse config if present.
-	if (cfg && !_parse_boot_config(&ctxt, cfg))
-		return 0;
-
 	gfx_printf(&gfx_con, "Initializing...\n\n");
 
 	// Read package1 and the correct keyblob.
 	if (!_read_emmc_pkg1(&ctxt))
 		return 0;
 
-	gfx_printf(&gfx_con, "Loaded pkg1 and keyblob\n");
+	// Try to parse config if present.
+	if (ctxt.cfg && !parse_boot_config(&ctxt))
+	{
+		EPRINTF("Wrong ini cfg or missing files!");
+		return 0;
+	}
+
+	// Check if fuses lower than 4.0.0 and if yes apply NO Gamecard patch.
+	if (h_cfg.autonogc && !(fuse_read_odm(7) & ~0xF) && ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_400)
+		config_kip1patch(&ctxt, "nogc");
+
+	gfx_printf(&gfx_con, "Loaded pkg1 & keyblob\n");
 
 	// Generate keys.
-	if (!h_cfg.se_keygen_done || ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_620)
+	if (!h_cfg.se_keygen_done || ctxt.pkg1_id->kb == KB_FIRMWARE_VERSION_620)
 	{
-		tsec_ctxt.key_ver = 1;
 		tsec_ctxt.fw = (u8 *)ctxt.pkg1 + ctxt.pkg1_id->tsec_off;
 		tsec_ctxt.pkg1 = ctxt.pkg1;
 		tsec_ctxt.pkg11_off = ctxt.pkg1_id->pkg11_off;
 		tsec_ctxt.secmon_base = ctxt.pkg1_id->secmon_base;
 
+		if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_700 && !h_cfg.sept_run)
+		{
+			gfx_printf(&gfx_con, "Failed to run sept\n");
+			return 0;
+		}
+
 		if (!keygen(ctxt.keyblob, ctxt.pkg1_id->kb, &tsec_ctxt))
 			return 0;
 		DPRINTF("Generated keys\n");
@@ -404,9 +441,16 @@ int hos_launch(ini_sec_t *cfg)
 		if (ctxt.pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
 			pkg1_decrypt(ctxt.pkg1_id, ctxt.pkg1);
 
-		pkg1_unpack((void *)ctxt.pkg1_id->warmboot_base, (void *)ctxt.pkg1_id->secmon_base, NULL, ctxt.pkg1_id, ctxt.pkg1);
-
-		gfx_printf(&gfx_con, "Decrypted and unpacked pkg1\n");
+		if (ctxt.pkg1_id->kb <= KB_FIRMWARE_VERSION_620)
+		{
+			pkg1_unpack((void *)ctxt.pkg1_id->warmboot_base, (void *)ctxt.pkg1_id->secmon_base, NULL, ctxt.pkg1_id, ctxt.pkg1);
+			gfx_printf(&gfx_con, "Decrypted & unpacked pkg1\n");
+		}
+		else
+		{
+			EPRINTF("No mandatory secmon or warmboot provided!");
+			return 0;
+		}
 	}
 
 	// Replace 'warmboot.bin' if requested.
@@ -414,6 +458,11 @@ int hos_launch(ini_sec_t *cfg)
 		memcpy((void *)ctxt.pkg1_id->warmboot_base, ctxt.warmboot, ctxt.warmboot_size);
 	else
 	{
+		if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_700)
+		{
+			EPRINTF("No warmboot provided!");
+			return 0;
+		}
 		// Else we patch it to allow downgrading.
 		patch_t *warmboot_patchset = ctxt.pkg1_id->warmboot_patchset;
 		gfx_printf(&gfx_con, "%kPatching Warmboot%k\n", 0xFFFFBA00, 0xFFCCCCCC);
@@ -427,7 +476,7 @@ int hos_launch(ini_sec_t *cfg)
 	// Replace 'SecureMonitor' if requested.
 	if (ctxt.secmon)
 		memcpy((void *)ctxt.pkg1_id->secmon_base, ctxt.secmon, ctxt.secmon_size);
-	else
+	else if (ctxt.pkg1_id->secmon_patchset)
 	{
 		// Else we patch it to allow for an unsigned package2 and patched kernel.
 		patch_t *secmon_patchset = ctxt.pkg1_id->secmon_patchset;
@@ -436,7 +485,7 @@ int hos_launch(ini_sec_t *cfg)
 			*(vu32 *)(ctxt.pkg1_id->secmon_base + secmon_patchset[i].off) = secmon_patchset[i].val;
 	}
 
-	gfx_printf(&gfx_con, "Loaded warmboot.bin and secmon\n");
+	gfx_printf(&gfx_con, "Loaded warmboot and secmon\n");
 
 	// Read package2.
 	u8 *bootConfigBuf = _read_emmc_pkg2(&ctxt);
@@ -464,7 +513,7 @@ int hos_launch(ini_sec_t *cfg)
 		ctxt.kernel = pkg2_hdr->data;
 		ctxt.kernel_size = pkg2_hdr->sec_size[PKG2_SEC_KERNEL];
 
-		if (ctxt.svcperm || ctxt.debugmode || ctxt.atmosphere)
+		if (!ctxt.stock && (ctxt.svcperm || ctxt.debugmode || ctxt.atmosphere))
 		{
 			u32 kernel_crc32 = crc32c(ctxt.kernel, ctxt.kernel_size);
 			ctxt.pkg2_kernel_id = pkg2_identify(kernel_crc32);
@@ -495,7 +544,7 @@ int hos_launch(ini_sec_t *cfg)
 	}
 
 	// Merge extra KIP1s into loaded ones.
-	gfx_printf(&gfx_con, "%kPatching kernel initial processes%k\n", 0xFFFFBA00, 0xFFCCCCCC);
+	gfx_printf(&gfx_con, "%kPatching kips%k\n", 0xFFFFBA00, 0xFFCCCCCC);
 	LIST_FOREACH_ENTRY(merge_kip_t, mki, &ctxt.kip1_list, link)
 		pkg2_merge_kip(&kip1_info, (pkg2_kip1_t *)mki->kip1);
 
@@ -503,7 +552,7 @@ int hos_launch(ini_sec_t *cfg)
 	const char* unappliedPatch = pkg2_patch_kips(&kip1_info, ctxt.kip1_patches);
 	if (unappliedPatch != NULL)
 	{
-		gfx_printf(&gfx_con, "%kREQUESTED PATCH '%s' NOT APPLIED!%k\n", 0xFFFF0000, unappliedPatch, 0xFFCCCCCC);
+		EPRINTFARGS("Failed to apply '%s'!", unappliedPatch);
 		sd_unmount(); // Just exiting is not enough until pkg2_patch_kips stops modifying the string passed into it.
 
 		_free_launch_components(&ctxt);
@@ -511,12 +560,9 @@ int hos_launch(ini_sec_t *cfg)
 	}
 
 	// Rebuild and encrypt package2.
-	pkg2_build_encrypt((void *)0xA9800000, ctxt.kernel, ctxt.kernel_size, &kip1_info);
+	pkg2_build_encrypt((void *)PKG2_LOAD_ADDR, ctxt.kernel, ctxt.kernel_size, &kip1_info);
 
-	gfx_printf(&gfx_con, "Rebuilt and loaded pkg2\n");
-
-	// Unmount SD card.
-	sd_unmount();
+	gfx_printf(&gfx_con, "Rebuilt & loaded pkg2\n");
 
 	gfx_printf(&gfx_con, "\n%kBooting...%k\n", 0xFF96FF00, 0xFFCCCCCC);
 
@@ -547,7 +593,7 @@ int hos_launch(ini_sec_t *cfg)
 	case KB_FIRMWARE_VERSION_600:
 		se_key_acc_ctrl(12, 0xFF);
 		se_key_acc_ctrl(15, 0xFF);
-	case KB_FIRMWARE_VERSION_620:
+	default:
 		bootStateDramPkg2 = 2;
 		bootStatePkg2Continue = 4;
 		break;
@@ -570,7 +616,10 @@ int hos_launch(ini_sec_t *cfg)
 
 	// Config Exosphère if booting full Atmosphère.
 	if (ctxt.atmosphere && ctxt.secmon)
-		config_exosphere(ctxt.pkg1_id->id, ctxt.pkg1_id->kb, ctxt.debugmode);
+		config_exosphere(ctxt.pkg1_id->id, ctxt.pkg1_id->kb, (void *)ctxt.pkg1_id->warmboot_base, ctxt.pkg1, ctxt.stock);
+
+	// Unmount SD card.
+	sd_unmount();
 
 	// Finalize MC carveout.
 	if (ctxt.pkg1_id->kb <= KB_FIRMWARE_VERSION_301)
@@ -583,39 +632,41 @@ int hos_launch(ini_sec_t *cfg)
 	if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_620)
 		_sysctr0_reset();
 
-	// Free allocated memory.
-	ini_free_section(cfg);
-	_free_launch_components(&ctxt);
-
 	// < 4.0.0 pkg1.1 locks PMC scratches.
 	//_pmc_scratch_lock(ctxt.pkg1_id->kb);
 
-	//  < 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM and pkg2 ready, 3: Continue boot.
-	// >= 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM ready, 4: pkg2 ready and continue boot.
-	vu32 *mb_in = (vu32 *)0x40002EF8;
-	// Non-zero: Secmon ready.
-	vu32 *mb_out = (vu32 *)0x40002EFC;
+	// Set secmon mailbox address.
+	if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_700)
+		secmon_mb = (secmon_mailbox_t *)SECMON7_MB_ADDR;
+	else
+		secmon_mb = (secmon_mailbox_t *)SECMON_MB_ADDR;
 
-	// Start from DRAM ready signal.
-	*mb_in = bootStateDramPkg2;
-	*mb_out = 0;
+	// Start from DRAM ready signal and reset outgoing value.
+	secmon_mb->in = bootStateDramPkg2;
+	secmon_mb->out = 0;
+
+	// Free allocated memory.
+	_free_launch_components(&ctxt);
 
 	// Disable display. This must be executed before secmon to provide support for all fw versions.
 	display_end();
 
+	// Clear EMC_SCRATCH0.
+	EMC(EMC_SCRATCH0) = 0;
+
 	// Wait for secmon to get ready.
 	if (smmu_is_used())
 		smmu_exit();
     else
 		cluster_boot_cpu0(ctxt.pkg1_id->secmon_base);
-	while (!*mb_out)
+	while (!secmon_mb->out)
 		usleep(1); // This only works when in IRAM or with a trained DRAM.
 
 	// Signal pkg2 ready and continue boot.
-	*mb_in = bootStatePkg2Continue;
+	secmon_mb->in = bootStatePkg2Continue;
 
 	// Halt ourselves in waitevent state and resume if there's JTAG activity.
-	while (1)
+	while (true)
 		FLOW_CTLR(FLOW_CTLR_HALT_COP_EVENTS) = 0x50000000;
 
 	return 0;

bootloader/hos/hos.h

@@ -30,7 +30,8 @@
 #define KB_FIRMWARE_VERSION_500 4
 #define KB_FIRMWARE_VERSION_600 5
 #define KB_FIRMWARE_VERSION_620 6
-#define KB_FIRMWARE_VERSION_MAX KB_FIRMWARE_VERSION_620
+#define KB_FIRMWARE_VERSION_700 7
+#define KB_FIRMWARE_VERSION_MAX KB_FIRMWARE_VERSION_700
 
 #define HOS_PKG11_MAGIC 0x31314B50
 
@@ -57,7 +58,10 @@ typedef struct _launch_ctxt_t
 
 	bool svcperm;
 	bool debugmode;
+	bool stock;
 	bool atmosphere;
+
+	ini_sec_t *cfg;
 } launch_ctxt_t;
 
 typedef struct _merge_kip_t

bootloader/hos/hos_config.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -19,12 +19,12 @@
 
 #include "hos.h"
 #include "hos_config.h"
+#include "fss.h"
 #include "../libs/fatfs/ff.h"
 #include "../mem/heap.h"
 #include "../utils/dirlist.h"
 
 #include "../gfx/gfx.h"
-extern gfx_con_t gfx_con;
 
 //#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)
 #define DPRINTF(...)
@@ -126,37 +126,7 @@ static int _config_kip1(launch_ctxt_t *ctxt, const char *value)
 	return 1;
 }
 
-static int _config_svcperm(launch_ctxt_t *ctxt, const char *value)
-{
-	if (*value == '1')
-	{
-		DPRINTF("Disabled SVC verification\n");
-		ctxt->svcperm = true;
-	}
-	return 1;
-}
-
-static int _config_debugmode(launch_ctxt_t *ctxt, const char *value)
-{
-	if (*value == '1')
-	{
-		DPRINTF("Enabled Debug mode\n");
-		ctxt->debugmode = true;
-	}
-	return 1;
-}
-
-static int _config_atmosphere(launch_ctxt_t *ctxt, const char *value)
-{
-	if (*value == '1')
-	{
-		DPRINTF("Enabled atmosphere patching\n");
-		ctxt->atmosphere = true;
-	}
-	return 1;
-}
-
-static int _config_kip1patch(launch_ctxt_t *ctxt, const char *value)
+int config_kip1patch(launch_ctxt_t *ctxt, const char *value)
 {
 	if (value == NULL)
 		return 0;
@@ -186,6 +156,51 @@ static int _config_kip1patch(launch_ctxt_t *ctxt, const char *value)
 	return 1;
 }
 
+static int _config_svcperm(launch_ctxt_t *ctxt, const char *value)
+{
+	if (*value == '1')
+	{
+		DPRINTF("Disabled SVC verification\n");
+		ctxt->svcperm = true;
+	}
+	return 1;
+}
+
+static int _config_debugmode(launch_ctxt_t *ctxt, const char *value)
+{
+	if (*value == '1')
+	{
+		DPRINTF("Enabled Debug mode\n");
+		ctxt->debugmode = true;
+	}
+	return 1;
+}
+
+static int _config_stock(launch_ctxt_t *ctxt, const char *value)
+{
+	if (*value == '1')
+	{
+		DPRINTF("Disabled all patching\n");
+		ctxt->stock = true;
+	}
+	return 1;
+}
+
+static int _config_atmosphere(launch_ctxt_t *ctxt, const char *value)
+{
+	if (*value == '1')
+	{
+		DPRINTF("Enabled atmosphere patching\n");
+		ctxt->atmosphere = true;
+	}
+	return 1;
+}
+
+static int _config_fss(launch_ctxt_t *ctxt, const char *value)
+{
+	return parse_fss(ctxt, value);
+}
+
 typedef struct _cfg_handler_t
 {
 	const char *key;
@@ -197,16 +212,18 @@ static const cfg_handler_t _config_handlers[] = {
 	{ "secmon", _config_secmon },
 	{ "kernel", _config_kernel },
 	{ "kip1", _config_kip1 },
-	{ "kip1patch", _config_kip1patch },
+	{ "kip1patch", config_kip1patch },
 	{ "fullsvcperm", _config_svcperm },
 	{ "debugmode", _config_debugmode },
+	{ "stock", _config_stock },
 	{ "atmosphere", _config_atmosphere },
+	{ "fss0", _config_fss },
 	{ NULL, NULL },
 };
 
-int _parse_boot_config(launch_ctxt_t *ctxt, ini_sec_t *cfg)
+int parse_boot_config(launch_ctxt_t *ctxt)
 {
-	LIST_FOREACH_ENTRY(ini_kv_t, kv, &cfg->kvs, link)
+	LIST_FOREACH_ENTRY(ini_kv_t, kv, &ctxt->cfg->kvs, link)
 	{
 		for(u32 i = 0; _config_handlers[i].key; i++)
 		{

bootloader/hos/hos_config.h

@@ -19,7 +19,8 @@
 
 #include "hos.h"
 
-int _parse_boot_config(launch_ctxt_t *ctxt, ini_sec_t *cfg);
+int parse_boot_config(launch_ctxt_t *ctxt);
+int config_kip1patch(launch_ctxt_t *ctxt, const char *value);
 
 #endif
 

bootloader/hos/pkg1.c

@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2018 naehrwert
  * Copyright (c) 2018 st4rk
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  * Copyright (c) 2018 balika011
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -20,8 +20,9 @@
 #include <string.h>
 
 #include "pkg1.h"
-#include "../utils/aarch64_util.h"
+#include "../gfx/gfx.h"
 #include "../sec/se.h"
+#include "../utils/aarch64_util.h"
 
 #define _NOPv7() 0xE320F000
 
@@ -116,20 +117,6 @@ PATCHSET_DEF(_warmboot_4_patchset,
 	{ 0x558, _NOPv7() }  // Segment id check.
 );
 
-PATCHSET_DEF(_warmboot_5_patchset,
-	{ 0x544, _NOPv7() }, // Fuse check.
-	{ 0x558, _NOPv7() }  // Segment id check.
-);
-
-PATCHSET_DEF(_warmboot_6_patchset,
-	{ 0x544, _NOPv7() }, // Fuse check.
-	{ 0x558, _NOPv7() }  // Segment id check.
-);
-
-PATCHSET_DEF(_warmboot_620_patchset,
-	{ 0x544, _NOPv7() }, // Fuse check.
-	{ 0x558, _NOPv7() }  // Segment id check.
-);
 
 /*
  * package1.1 header: <wb, ldr, sm>
@@ -142,23 +129,30 @@ PATCHSET_DEF(_warmboot_620_patchset,
  * 5.0: {ldr, sm, wb} { 1, 2, 0 }
  * 6.0: {ldr, sm, wb} { 1, 2, 0 }
  * 6.2: {ldr, sm, wb} { 1, 2, 0 }
+ * 7.0: {ldr, sm, wb} { 1, 2, 0 }
  */
 
 static const pkg1_id_t _pkg1_ids[] = {
-	{ "20161121183008", 0, 0x1900, 0x3FE0, { 2, 1, 0 }, SM_100_ADR, 0x8000D000, true,  _secmon_1_patchset, _warmboot_1_patchset },     //1.0.0 (Patched relocator)
-	{ "20170210155124", 0, 0x1900, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_2_patchset, _warmboot_2_patchset },     //2.0.0 - 2.3.0
-	{ "20170519101410", 1, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },     //3.0.0
-	{ "20170710161758", 2, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },     //3.0.1 - 3.0.2
-	{ "20170921172629", 3, 0x1800, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_4_patchset, _warmboot_4_patchset },     //4.0.0 - 4.1.0
-	{ "20180220163747", 4, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_5_patchset, _warmboot_5_patchset },     //5.0.0 - 5.1.0
-	{ "20180802162753", 5, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_6_patchset, _warmboot_6_patchset },     //6.0.0 - 6.1.0
-	{ "20181107105733", 6, 0x0E00, 0x6FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_620_patchset, _warmboot_620_patchset }, //6.2.0
+	{ "20161121183008", 0, 0x1900, 0x3FE0, { 2, 1, 0 }, SM_100_ADR, 0x8000D000, true,  _secmon_1_patchset, _warmboot_1_patchset },   //1.0.0 (Patched relocator)
+	{ "20170210155124", 0, 0x1900, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_2_patchset, _warmboot_2_patchset },   //2.0.0 - 2.3.0
+	{ "20170519101410", 1, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },   //3.0.0
+	{ "20170710161758", 2, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },   //3.0.1 - 3.0.2
+	{ "20170921172629", 3, 0x1800, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_4_patchset, _warmboot_4_patchset },   //4.0.0 - 4.1.0
+	{ "20180220163747", 4, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_5_patchset, _warmboot_4_patchset },   //5.0.0 - 5.1.0
+	{ "20180802162753", 5, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_6_patchset, _warmboot_4_patchset },   //6.0.0 - 6.1.0
+	{ "20181107105733", 6, 0x0E00, 0x6FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_620_patchset, _warmboot_4_patchset }, //6.2.0
+	{ "20181218175730", 7, 0x0F00, 0x6FE0, { 1, 2, 0 }, 0x40030000, 0x4003E000, false, NULL, _warmboot_4_patchset },                 //7.0.0
+	{ "20190208150037", 7, 0x0F00, 0x6FE0, { 1, 2, 0 }, 0x40030000, 0x4003E000, false, NULL, _warmboot_4_patchset },                 //7.0.1
 	{ NULL } //End.
 };
 
-
 const pkg1_id_t *pkg1_identify(u8 *pkg1)
 {
+	char build_date[15];
+	memcpy(build_date, (char *)(pkg1 + 0x10), 14);
+	build_date[14] = 0;
+	gfx_printf(&gfx_con, "Found pkg1 ('%s').\n\n", build_date);
+
 	for (u32 i = 0; _pkg1_ids[i].id; i++)
 		if (!memcmp(pkg1 + 0x10, _pkg1_ids[i].id, 12))
 			return &_pkg1_ids[i];

bootloader/hos/pkg2.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -26,8 +26,6 @@
 
 #include "../gfx/gfx.h"
 
-extern gfx_con_t gfx_con;
-
 /*#include "util.h"
 #define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)
 #define DEBUG_PRINTING*/
@@ -44,6 +42,7 @@ extern gfx_con_t gfx_con;
 #define FREE_CODE_OFF_1ST_400 0x52890
 #define FREE_CODE_OFF_1ST_500 0x5C020
 #define FREE_CODE_OFF_1ST_600 0x5EE00
+#define FREE_CODE_OFF_1ST_700 0x5FEC0
 
 #define ID_SND_OFF_100 0x23CC0
 #define ID_SND_OFF_200 0x3F134
@@ -52,6 +51,7 @@ extern gfx_con_t gfx_con;
 #define ID_SND_OFF_400 0x2AF64
 #define ID_SND_OFF_500 0x2AD34
 #define ID_SND_OFF_600 0x2BB8C
+#define ID_SND_OFF_700 0x2D044
 
 #define ID_RCV_OFF_100 0x219F0
 #define ID_RCV_OFF_200 0x3D1A8
@@ -60,13 +60,14 @@ extern gfx_con_t gfx_con;
 #define ID_RCV_OFF_400 0x28F6C
 #define ID_RCV_OFF_500 0x28DAC
 #define ID_RCV_OFF_600 0x29B6C
+#define ID_RCV_OFF_700 0x2B23C
 
 static u32 PRC_ID_SND_100[] =
 {
 	0xA9BF2FEA, 0x2A0E03EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9412948,	0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_100 (FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100) + 4)
+#define FREE_CODE_OFF_2ND_100 (FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100) + sizeof(u32))
 static u32 PRC_ID_RCV_100[] =
 {
 	0xA9BF2FEA, 0x2A1C03EA, 0xD37EF54A, 0xF86A69AA, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A,
@@ -78,7 +79,7 @@ static u32 PRC_ID_SND_200[] =
 	0xA9BF2FEA, 0x2A1803EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9413148, 0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_200 (FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200) + 4)
+#define FREE_CODE_OFF_2ND_200 (FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200) + sizeof(u32))
 static u32 PRC_ID_RCV_200[] =
 {
 	0xA9BF2FEA, 0x2A0F03EA, 0xD37EF54A, 0xF9405FEB, 0xF86A696A, 0xF9407BEB, 0x92FFFFE9, 0x8A090148,
@@ -90,7 +91,7 @@ static u32 PRC_ID_SND_300[] =
 	0xA9BF2FEA, 0x2A1803EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9415548, 0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_300 (FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300) + 4)
+#define FREE_CODE_OFF_2ND_300 (FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300) + sizeof(u32))
 static u32 PRC_ID_RCV_300[] =
 {
 	0xA9BF2FEA, 0x2A0F03EA, 0xD37EF54A, 0xF9405FEB, 0xF86A696A, 0xF9407BEB, 0x92FFFFE9, 0x8A090148,
@@ -102,7 +103,7 @@ static u32 PRC_ID_SND_302[] =
 	0xA9BF2FEA, 0x2A1803EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9415548, 0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_302 (FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302) + 4)
+#define FREE_CODE_OFF_2ND_302 (FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302) + sizeof(u32))
 static u32 PRC_ID_RCV_302[] =
 {
 	0xA9BF2FEA, 0x2A0F03EA, 0xD37EF54A, 0xF9405FEB, 0xF86A696A, 0xF9407BEB, 0x92FFFFE9, 0x8A090148,
@@ -114,7 +115,7 @@ static u32 PRC_ID_SND_400[] =
 	0x2A1703EA, 0xD37EF54A, 0xF86A6B8A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A, 0xD2FFFFC9,
 	0xEB09015F, 0x54000060, 0xF94053EA, 0xF9415948, 0xF94053EA
 };
-#define FREE_CODE_OFF_2ND_400 (FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400) + 4)
+#define FREE_CODE_OFF_2ND_400 (FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400) + sizeof(u32))
 static u32 PRC_ID_RCV_400[] =
 {
 	0xF9403BED, 0x2A0E03EA, 0xD37EF54A, 0xF86A69AA, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A,
@@ -126,7 +127,7 @@ static u32 PRC_ID_SND_500[] =
 	0x2A1703EA, 0xD37EF54A, 0xF86A6B6A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A, 0xD2FFFFC9,
 	0xEB09015F, 0x54000060, 0xF94043EA, 0xF9415948, 0xF94043EA
 };
-#define FREE_CODE_OFF_2ND_500 (FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500) + 4)
+#define FREE_CODE_OFF_2ND_500 (FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500) + sizeof(u32))
 static u32 PRC_ID_RCV_500[] =
 {
 	0xF9403BED, 0x2A1503EA, 0xD37EF54A, 0xF86A69AA, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A,
@@ -139,7 +140,7 @@ static u32 PRC_ID_SND_600[] =
 	0x8A09014A, 0xD2FFFFC9, 0xEB09015F, 0x54000100, 0xA9BF27E8, 0xF9400308, 0xF9401D08, 0xAA1803E0,
 	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
 };
-#define FREE_CODE_OFF_2ND_600 (FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600) + 4)
+#define FREE_CODE_OFF_2ND_600 (FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600) + sizeof(u32))
 static u32 PRC_ID_RCV_600[] =
 {
 	0xA9BF2FEA, 0xF94043EB, 0x2A1503EA, 0xD37EF54A, 0xF86A696A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9,
@@ -147,6 +148,20 @@ static u32 PRC_ID_RCV_600[] =
 	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
 };
 
+static u32 PRC_ID_SND_700[] =
+{
+	0xA9BF2FEA, 0xF9403BEB, 0x2A1903EA, 0xD37EF54A, 0xF86A696A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9,
+	0x8A09014A, 0xD2FFFFC9, 0xEB09015F, 0x54000100, 0xA9BF27E8, 0xF94002A8, 0xF9401D08, 0xAA1503E0,
+	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
+};
+#define FREE_CODE_OFF_2ND_700 (FREE_CODE_OFF_1ST_700 + sizeof(PRC_ID_SND_700) + sizeof(u32))
+static u32 PRC_ID_RCV_700[] =
+{
+	0xA9BF2FEA, 0xF9404FEB, 0x2A1603EA, 0xD37EF54A, 0xF86A696A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9,
+	0x8A09014A, 0xD2FFFFC9, 0xEB09015F, 0x54000100, 0xA9BF27E8, 0xF9400368, 0xF9401D08, 0xAA1B03E0,
+	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
+};
+
 // Include kernel patches here, so we can utilize pkg1 id
 KERNEL_PATCHSET_DEF(_kernel_1_patchset,
 	{ SVC_VERIFY_DS, 0x3764C, _NOP(), NULL },          // Disable SVC verifications
@@ -155,11 +170,11 @@ KERNEL_PATCHSET_DEF(_kernel_1_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_100, _B(ID_SND_OFF_100, FREE_CODE_OFF_1ST_100), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_100, sizeof(PRC_ID_SND_100) >> 2, PRC_ID_SND_100}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100), ID_SND_OFF_100 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100), ID_SND_OFF_100 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_100, _B(ID_RCV_OFF_100, FREE_CODE_OFF_2ND_100), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_100, sizeof(PRC_ID_RCV_100) >> 2, PRC_ID_RCV_100}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_100 + sizeof(PRC_ID_RCV_100),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_100 + sizeof(PRC_ID_RCV_100), ID_RCV_OFF_100 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_100 + sizeof(PRC_ID_RCV_100), ID_RCV_OFF_100 + sizeof(u32)), NULL}
 );
 
 KERNEL_PATCHSET_DEF(_kernel_2_patchset,
@@ -169,11 +184,11 @@ KERNEL_PATCHSET_DEF(_kernel_2_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_200, _B(ID_SND_OFF_200, FREE_CODE_OFF_1ST_200), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_200, sizeof(PRC_ID_SND_200) >> 2, PRC_ID_SND_200}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200), ID_SND_OFF_200 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200), ID_SND_OFF_200 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_200, _B(ID_RCV_OFF_200, FREE_CODE_OFF_2ND_200), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_200, sizeof(PRC_ID_RCV_200) >> 2, PRC_ID_RCV_200}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_200 + sizeof(PRC_ID_RCV_200),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_200 + sizeof(PRC_ID_RCV_200), ID_RCV_OFF_200 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_200 + sizeof(PRC_ID_RCV_200), ID_RCV_OFF_200 + sizeof(u32)), NULL}
 );
 
 KERNEL_PATCHSET_DEF(_kernel_3_patchset,
@@ -183,11 +198,11 @@ KERNEL_PATCHSET_DEF(_kernel_3_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_300, _B(ID_SND_OFF_300, FREE_CODE_OFF_1ST_300), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_300, sizeof(PRC_ID_SND_300) >> 2, PRC_ID_SND_300}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300), ID_SND_OFF_300 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300), ID_SND_OFF_300 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_300, _B(ID_RCV_OFF_300, FREE_CODE_OFF_2ND_300), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_300, sizeof(PRC_ID_RCV_300) >> 2, PRC_ID_RCV_300}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_300 + sizeof(PRC_ID_RCV_300),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_300 + sizeof(PRC_ID_RCV_300), ID_RCV_OFF_300 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_300 + sizeof(PRC_ID_RCV_300), ID_RCV_OFF_300 + sizeof(u32)), NULL}
 );
 
 KERNEL_PATCHSET_DEF(_kernel_302_patchset,
@@ -197,11 +212,11 @@ KERNEL_PATCHSET_DEF(_kernel_302_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_302, _B(ID_SND_OFF_302, FREE_CODE_OFF_1ST_302), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_302, sizeof(PRC_ID_SND_302) >> 2, PRC_ID_SND_302}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302), ID_SND_OFF_302 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302), ID_SND_OFF_302 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_302, _B(ID_RCV_OFF_302, FREE_CODE_OFF_2ND_302), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_302, sizeof(PRC_ID_RCV_302) >> 2, PRC_ID_RCV_302}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_302 + sizeof(PRC_ID_RCV_302),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_302 + sizeof(PRC_ID_RCV_302), ID_RCV_OFF_302 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_302 + sizeof(PRC_ID_RCV_302), ID_RCV_OFF_302 + sizeof(u32)), NULL}
 );
 
 KERNEL_PATCHSET_DEF(_kernel_4_patchset,
@@ -211,11 +226,11 @@ KERNEL_PATCHSET_DEF(_kernel_4_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_400, _B(ID_SND_OFF_400, FREE_CODE_OFF_1ST_400), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_400, sizeof(PRC_ID_SND_400) >> 2, PRC_ID_SND_400}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400),                      // Branch back and skip 2 instructions.
-		_B(FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400), ID_SND_OFF_400 + 8), NULL},
+		_B(FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400), ID_SND_OFF_400 + sizeof(u32) * 2), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_400, _B(ID_RCV_OFF_400, FREE_CODE_OFF_2ND_400), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_400, sizeof(PRC_ID_RCV_400) >> 2, PRC_ID_RCV_400}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_400 + sizeof(PRC_ID_RCV_400),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_400 + sizeof(PRC_ID_RCV_400), ID_RCV_OFF_400 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_400 + sizeof(PRC_ID_RCV_400), ID_RCV_OFF_400 + sizeof(u32)), NULL}
 );
 
 KERNEL_PATCHSET_DEF(_kernel_5_patchset,
@@ -226,11 +241,11 @@ KERNEL_PATCHSET_DEF(_kernel_5_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_500, _B(ID_SND_OFF_500, FREE_CODE_OFF_1ST_500), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_500, sizeof(PRC_ID_SND_500) >> 2, PRC_ID_SND_500}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500),                      // Branch back and skip 2 instructions.
-		_B(FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500), ID_SND_OFF_500 + 8), NULL},
+		_B(FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500), ID_SND_OFF_500 + sizeof(u32) * 2), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_500, _B(ID_RCV_OFF_500, FREE_CODE_OFF_2ND_500), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_500, sizeof(PRC_ID_RCV_500) >> 2, PRC_ID_RCV_500}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_500 + sizeof(PRC_ID_RCV_500),                      // Branch back and skip 2 instructions.
-		_B(FREE_CODE_OFF_2ND_500 + sizeof(PRC_ID_RCV_500), ID_RCV_OFF_500 + 8), NULL}
+		_B(FREE_CODE_OFF_2ND_500 + sizeof(PRC_ID_RCV_500), ID_RCV_OFF_500 + sizeof(u32) * 2), NULL}
 );
 
 KERNEL_PATCHSET_DEF(_kernel_6_patchset,
@@ -241,11 +256,26 @@ KERNEL_PATCHSET_DEF(_kernel_6_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_600, _B(ID_SND_OFF_600, FREE_CODE_OFF_1ST_600), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_600, sizeof(PRC_ID_SND_600) >> 2, PRC_ID_SND_600}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600),                      // Branch back and skip 4 instructions.
-		_B(FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600), ID_SND_OFF_600 + 0x10), NULL},
+		_B(FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600), ID_SND_OFF_600 + sizeof(u32) * 4), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_600, _B(ID_RCV_OFF_600, FREE_CODE_OFF_2ND_600), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_600, sizeof(PRC_ID_RCV_600) >> 2, PRC_ID_RCV_600}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_600 + sizeof(PRC_ID_RCV_600),                      // Branch back and skip 4 instructions.
-		_B(FREE_CODE_OFF_2ND_600 + sizeof(PRC_ID_RCV_600), ID_RCV_OFF_600 + 0x10), NULL}
+		_B(FREE_CODE_OFF_2ND_600 + sizeof(PRC_ID_RCV_600), ID_RCV_OFF_600 + sizeof(u32) * 4), NULL}
+);
+
+KERNEL_PATCHSET_DEF(_kernel_7_patchset,
+	{ SVC_GENERIC,   0x3C6E0, _NOP(), NULL },          // Allow same process on svcControlCodeMemory.
+	{ SVC_VERIFY_DS, 0x49E5C, _NOP(), NULL },          // Disable SVC verifications
+	{ DEBUG_MODE_EN, 0x581B0, _MOVZX(8, 1, 0), NULL }, // Enable Debug Patch
+	// Atmosphère kernel patches.
+	{ ATM_GEN_PATCH, ID_SND_OFF_700, _B(ID_SND_OFF_700, FREE_CODE_OFF_1ST_700), NULL},    // Send process id branch.
+	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_700, sizeof(PRC_ID_SND_700) >> 2, PRC_ID_SND_700}, // Send process id code.
+	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_700 + sizeof(PRC_ID_SND_700),                      // Branch back and skip 4 instructions.
+		_B(FREE_CODE_OFF_1ST_700 + sizeof(PRC_ID_SND_700), ID_SND_OFF_700 + sizeof(u32) * 4), NULL},
+	{ ATM_GEN_PATCH, ID_RCV_OFF_700, _B(ID_RCV_OFF_700, FREE_CODE_OFF_2ND_700), NULL},    // Receive process id branch.
+	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_700, sizeof(PRC_ID_RCV_700) >> 2, PRC_ID_RCV_700}, // Receive process id code.
+	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_700 + sizeof(PRC_ID_RCV_700),                      // Branch back and skip 4 instructions.
+		_B(FREE_CODE_OFF_2ND_700 + sizeof(PRC_ID_RCV_700), ID_RCV_OFF_700 + sizeof(u32) * 4), NULL}
 );
 
 static const pkg2_kernel_id_t _pkg2_kernel_ids[] =
@@ -257,6 +287,7 @@ static const pkg2_kernel_id_t _pkg2_kernel_ids[] =
 	{ 0x485d0157, _kernel_4_patchset },   //4.0.0 - 4.1.0
 	{ 0xf3c363f2, _kernel_5_patchset },   //5.0.0 - 5.1.0
 	{ 0x64ce1a44, _kernel_6_patchset },   //6.0.0 - 6.2.0
+	{ 0x908175e1, _kernel_7_patchset },   //7.0.0
 	{ 0, 0 }                              //End.
 };
 
@@ -277,195 +308,238 @@ enum kip_offset_section
 #define GET_KIP_PATCH_OFFSET(x) (x & KIP_PATCH_OFFSET_MASK)
 #define KPS(x) ((u32)(x) << KIP_PATCH_SECTION_SHIFT)
 
-static kip1_patch_t _fs_nosigchk_100[] = 
+static kip1_patch_t _fs_nosigchk_100[] =
 {
 	{ KPS(KIP_TEXT) | 0x194A0, 4, "\xBA\x09\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x3A79C, 4, "\xE0\x06\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_100[] = 
+static kip1_patchset_t _fs_patches_100[] =
 {
 	{ "nosigchk", _fs_nosigchk_100 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_200[] = 
+static kip1_patch_t _fs_nosigchk_200[] =
 {
 	{ KPS(KIP_TEXT) | 0x15DF4, 4, "\xBC\x0A\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x3F720, 4, "\x00\x06\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_200[] = 
+static kip1_patchset_t _fs_patches_200[] =
 {
 	{ "nosigchk", _fs_nosigchk_200 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_210[] = 
+static kip1_patch_t _fs_nosigchk_210[] =
 {
 	{ KPS(KIP_TEXT) | 0x15F64, 4, "\xDF\x0A\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x3FAF8, 4, "\x00\x06\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_210[] = 
+static kip1_patchset_t _fs_patches_210[] =
 {
 	{ "nosigchk", _fs_nosigchk_210 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_300[] = 
+static kip1_patch_t _fs_nosigchk_300[] =
 {
 	{ KPS(KIP_TEXT) | 0x18E24, 4, "\x52\x0C\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x49EC8, 4, "\x40\x04\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_300[] = 
+static kip1_patchset_t _fs_patches_300[] =
 {
 	{ "nosigchk", _fs_nosigchk_300 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_30x[] = 
+static kip1_patch_t _fs_nosigchk_30x[] =
 {
 	{ KPS(KIP_TEXT) | 0x18E90, 4, "\x52\x0C\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x49F34, 4, "\xE0\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_30x[] = 
+static kip1_patchset_t _fs_patches_30x[] =
 {
 	{ "nosigchk", _fs_nosigchk_30x },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_4xx[] = 
+static kip1_patch_t _fs_nosigchk_4xx[] =
 {
 	{ KPS(KIP_TEXT) | 0x1C4FC, 4, "\x3C\x2F\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x57934, 4, "\xE0\x02\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patch_t _fs_nogc_40x[] = 
+static kip1_patch_t _fs_nogc_40x[] =
 {
 	{ KPS(KIP_TEXT) | 0xA3458, 4, "\x14\x40\x80\x72", "\x14\x80\x80\x72" },
 	{ KPS(KIP_TEXT) | 0xAAB44, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_40x[] = 
+static kip1_patchset_t _fs_patches_40x[] =
 {
 	{ "nosigchk", _fs_nosigchk_4xx },
 	{ "nogc",     _fs_nogc_40x },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nogc_410[] = 
+static kip1_patch_t _fs_nogc_410[] =
 {
 	{ KPS(KIP_TEXT) | 0xA34BC, 4, "\x14\x40\x80\x72", "\x14\x80\x80\x72" },
 	{ KPS(KIP_TEXT) | 0xAABA8, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_410[] = 
+static kip1_patchset_t _fs_patches_410[] =
 {
 	{ "nosigchk", _fs_nosigchk_4xx },
 	{ "nogc",     _fs_nogc_410 },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_50x[] = 
+static kip1_patch_t _fs_nosigchk_50x[] =
 {
 	{ KPS(KIP_TEXT) | 0x22DDC, 4, "\x7D\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x7D490, 4, "\x40\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patch_t _fs_nogc_50x[] = 
+static kip1_patch_t _fs_nogc_50x[] =
 {
 	{ KPS(KIP_TEXT) | 0xCF3C4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ KPS(KIP_TEXT) | 0xD73A0, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_50x[] = 
+static kip1_patchset_t _fs_patches_50x[] =
 {
 	{ "nosigchk", _fs_nosigchk_50x },
 	{ "nogc",     _fs_nogc_50x },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_510[] = 
+static kip1_patch_t _fs_nosigchk_510[] =
 {
 	{ KPS(KIP_TEXT) | 0x22E0C, 4, "\x85\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x7D860, 4, "\x40\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patch_t _fs_nogc_510[] = 
+static kip1_patch_t _fs_nogc_510[] =
 {
 	{ KPS(KIP_TEXT) | 0xCF794, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ KPS(KIP_TEXT) | 0xD7770, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_510[] = 
+static kip1_patchset_t _fs_patches_510[] =
 {
 	{ "nosigchk", _fs_nosigchk_510 },
 	{ "nogc",     _fs_nogc_510 },
 	{ NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_600[] = 
+static kip1_patch_t _fs_nosigchk_600[] =
 {
 	{ KPS(KIP_TEXT) | 0x712A8, 4, "\x8E\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0xEB08C, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patch_t _fs_nosigchk_600_exfat[] = 
+static kip1_patch_t _fs_nosigchk_600_exfat[] =
 {
 	{ KPS(KIP_TEXT) | 0x7C9A8, 4, "\x8E\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0xF678C, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patch_t _fs_nogc_600[] = 
+static kip1_patch_t _fs_nogc_600[] =
 {
 	{ KPS(KIP_TEXT) | 0x12CC20, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ KPS(KIP_TEXT) | 0x1538F4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patch_t _fs_nogc_600_exfat[] = 
+static kip1_patch_t _fs_nogc_600_exfat[] =
 {
 	{ KPS(KIP_TEXT) | 0x138320, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ KPS(KIP_TEXT) | 0x15EFF4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ 0, 0, NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_600[] = 
+static kip1_patchset_t _fs_patches_600[] =
 {
 	{ "nosigchk", _fs_nosigchk_600 },
 	{ "nogc",     _fs_nogc_600 },
 	{ NULL, NULL }
 };
 
-static kip1_patchset_t _fs_patches_600_exfat[] = 
+static kip1_patchset_t _fs_patches_600_exfat[] =
 {
 	{ "nosigchk", _fs_nosigchk_600_exfat },
 	{ "nogc",     _fs_nogc_600_exfat },
 	{ NULL, NULL }
 };
 
+static kip1_patch_t _fs_nosigchk_700[] =
+{
+	{ KPS(KIP_TEXT) | 0x74A2C, 4, "\x31\x43\x00\x94", "\xE0\x03\x1F\x2A" },
+	{ KPS(KIP_TEXT) | 0xF25E4, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patch_t _fs_nosigchk_700_exfat[] =
+{
+	{ KPS(KIP_TEXT) | 0x7FFDC, 4, "\x31\x43\x00\x94", "\xE0\x03\x1F\x2A" },
+	{ KPS(KIP_TEXT) | 0xFDB94, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patch_t _fs_nogc_700[] =
+{
+	{ KPS(KIP_TEXT) | 0x134160, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
+	{ KPS(KIP_TEXT) | 0x15BF04, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patch_t _fs_nogc_700_exfat[] =
+{
+	{ KPS(KIP_TEXT) | 0x13F710, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
+	{ KPS(KIP_TEXT) | 0x1674B4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patchset_t _fs_patches_700[] =
+{
+	{ "nosigchk", _fs_nosigchk_700 },
+	{ "nogc",     _fs_nogc_700 },
+	{ NULL, NULL }
+};
+
+static kip1_patchset_t _fs_patches_700_exfat[] =
+{
+	{ "nosigchk", _fs_nosigchk_700_exfat },
+	{ "nogc",     _fs_nogc_700_exfat },
+	{ NULL, NULL }
+};
+
+// SHA256 hashes.
 static kip1_id_t _kip_ids[] = 
 {
 	{ "FS", "\xde\x9f\xdd\xa4\x08\x5d\xd5\xfe\x68\xdc\xb2\x0b\x41\x09\x5b\xb4", _fs_patches_100 },       // FS 1.0.0
@@ -489,7 +563,9 @@ static kip1_id_t _kip_ids[] =
 	{ "FS", "\x1b\x82\xcb\x22\x18\x67\xcb\x52\xc4\x4a\x86\x9e\xa9\x1a\x1a\xdd", _fs_patches_600 }, 		 // FS 6.0.0-4.0
 	{ "FS", "\x96\x6a\xdd\x3d\x20\xb6\x27\x13\x2c\x5a\x8d\xa4\x9a\xc9\xd8\xdd", _fs_patches_600_exfat }, // FS 6.0.0-4.0 exfat
 	{ "FS", "\x3a\x57\x4d\x43\x61\x86\x19\x1d\x17\x88\xeb\x2c\x0f\x07\x6b\x11", _fs_patches_600 }, 		 // FS 6.0.0-5.0
-	{ "FS", "\x33\x05\x53\xf6\xb5\xfb\x55\xc4\xc2\xd7\xb7\x36\x24\x02\x76\xb3", _fs_patches_600_exfat }  // FS 6.0.0-5.0 exfat
+	{ "FS", "\x33\x05\x53\xf6\xb5\xfb\x55\xc4\xc2\xd7\xb7\x36\x24\x02\x76\xb3", _fs_patches_600_exfat }, // FS 6.0.0-5.0 exfat
+	{ "FS", "\x2A\xDB\xE9\x7E\x9B\x5F\x41\x77\x9E\xC9\x5F\xFE\x26\x99\xC9\x33", _fs_patches_700 }, 		 // FS 7.0.0
+	{ "FS", "\x2C\xCE\x65\x9C\xEC\x53\x6A\x8E\x4D\x91\xF3\xBE\x4B\x74\xBE\xD3", _fs_patches_700_exfat }  // FS 7.0.0 exfat
 };
 
 const pkg2_kernel_id_t *pkg2_identify(u32 id)
@@ -901,4 +977,3 @@ DPRINTF("INI1 encrypted\n");
 	memset(hdr->ctr, 0 , 0x10);
 	*(u32 *)hdr->ctr = 0x100 + sizeof(pkg2_hdr_t) + kernel_size + ini1_size;
 }
-

bootloader/hos/pkg2.h

@@ -117,16 +117,16 @@ typedef struct _pkg2_kernel_id_t
 
 typedef struct _kip1_patch_t
 {
-	u32 offset; //section+offset of patch to apply
-	u32 length; //in bytes, 0 means last patch
-	const char* srcData; //that must match
-	const char* dstData; //that it gets replaced by
+	u32 offset; // section+offset of patch to apply.
+	u32 length; // In bytes, 0 means last patch.
+	const char* srcData; // That must match.
+	const char* dstData; // That it gets replaced by.
 } kip1_patch_t;
 
 typedef struct _kip1_patchset_t
 {
-	const char* name; //NULL means end
-	kip1_patch_t* patches; //NULL means not necessary
+	const char* name; // NULL means end.
+	kip1_patch_t* patches; // NULL means not necessary.
 } kip1_patchset_t;
 
 typedef struct _kip1_id_t

bootloader/hos/secmon_exo.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2018 CTCaer
+ * Copyright (C) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -17,25 +17,44 @@
 #include <string.h>
 
 #include "hos.h"
+#include "../mem/heap.h"
+#include "../soc/fuse.h"
+#include "../storage/sdmmc.h"
 #include "../utils/types.h"
 
-// Exosphère mailbox defines.
-#define EXO_MAGIC_ADDR 0x40002E40
-#define  EXO_MAGIC_VAL     0x31434258
-#define EXO_FWNO_ADDR  0x40002E44
-#define EXO_FLAGS_ADDR 0x40002E48
-#define  EXO_FLAG_620_KGN  (1 << 0)
-#define  EXO_FLAG_DBG_PRIV (1 << 1)
-#define  EXO_FLAG_DBG_USER (1 << 2)
+typedef struct _exo_cfg_t
+{
+	vu32 magic;
+	vu32 fwno;
+	vu32 flags;
+	vu32 rsvd;
+} exo_cfg_t;
 
-void config_exosphere(const char *id, u32 kb, bool debug)
+typedef struct _atm_meta_t
+{
+	uint32_t magic;
+	uint32_t fwno;
+} wb_cfg_t;
+
+#define ATM_WB_HEADER_OFF 0x244
+#define  ATM_WB_MAGIC 0x30544257
+
+// Exosphère mailbox defines.
+#define EXO_CFG_DEPR_ADDR 0x40002E40 // Deprecated.
+#define EXO_CFG_ADDR      0x8000F000
+#define  EXO_MAGIC_DEPR_VAL 0x31434258
+#define  EXO_MAGIC_VAL      0x304F5845
+#define  EXO_FLAG_620_KGN   (1 << 0)
+#define  EXO_FLAG_DBG_PRIV  (1 << 1)
+#define  EXO_FLAG_DBG_USER  (1 << 2)
+
+void config_exosphere(const char *id, u32 kb, void *warmboot, void *pkg1, bool stock)
 {
 	u32 exoFwNo = 0;
 	u32 exoFlags = 0;
 
-	vu32 *mb_exo_magic = (vu32 *)EXO_MAGIC_ADDR;
-	vu32 *mb_exo_fw_no = (vu32 *)EXO_FWNO_ADDR;
-	vu32 *mb_exo_flags = (vu32 *)EXO_FLAGS_ADDR;
+	volatile exo_cfg_t *exo_cfg_depr = (exo_cfg_t *)EXO_CFG_DEPR_ADDR;
+	volatile exo_cfg_t *exo_cfg = (exo_cfg_t *)EXO_CFG_ADDR;
 
 	switch (kb)
 	{
@@ -53,14 +72,47 @@ void config_exosphere(const char *id, u32 kb, bool debug)
 		break;
 	}
 
-	if (kb >= KB_FIRMWARE_VERSION_620)
+	if (kb == KB_FIRMWARE_VERSION_620)
 		exoFlags |= EXO_FLAG_620_KGN;
 
-	if (debug)
+	// To avoid problems, make private debug mode always on if not semi-stock.
+	if (!stock)
 		exoFlags |= EXO_FLAG_DBG_PRIV;
 
 	// Set mailbox values.
-	*mb_exo_magic = EXO_MAGIC_VAL;
-	*mb_exo_fw_no = exoFwNo;
-	*mb_exo_flags = exoFlags;
+	exo_cfg_depr->magic = EXO_MAGIC_VAL;
+	exo_cfg->magic = EXO_MAGIC_VAL;
+
+	exo_cfg_depr->fwno = exoFwNo;
+	exo_cfg->fwno = exoFwNo;
+
+	exo_cfg_depr->flags = exoFlags;
+	exo_cfg->flags = exoFlags;
+
+	// If warmboot is lp0fw, add in RSA modulus.
+	volatile wb_cfg_t *wb_cfg = (wb_cfg_t *)(warmboot + ATM_WB_HEADER_OFF);
+
+	if (wb_cfg->magic == ATM_WB_MAGIC)
+	{
+		wb_cfg->fwno = exoFwNo;
+
+		sdmmc_storage_t storage;
+		sdmmc_t sdmmc;
+
+		// Set warmboot binary rsa modulus.
+		u8 *rsa_mod = (u8 *)malloc(512);
+
+		sdmmc_storage_init_mmc(&storage, &sdmmc, SDMMC_4, SDMMC_BUS_WIDTH_8, 4);
+		sdmmc_storage_set_mmc_partition(&storage, 1);
+		sdmmc_storage_read(&storage, 1, 1, rsa_mod);
+		sdmmc_storage_end(&storage);
+
+		// Patch AutoRCM out.
+		if ((fuse_read_odm(4) & 3) != 3)
+			rsa_mod[0x10] = 0xF7;
+		else
+			rsa_mod[0x10] = 0x37;
+
+		memcpy(warmboot + 0x10, rsa_mod + 0x10, 0x100);
+	}
 }

bootloader/hos/secmon_exo.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2018 CTCaer
+ * Copyright (C) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -19,6 +19,6 @@
 
 #include "../utils/types.h"
 
-void config_exosphere(const char *id, u32 kb, bool debug);
+void config_exosphere(const char *id, u32 kb, void *warmboot, void *pkg1, bool stock);
 
 #endif

bootloader/hos/sept.c

@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2019 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <string.h>
+
+#include "hos.h"
+#include "sept.h"
+#include "../config/config.h"
+#include "../gfx/di.h"
+#include "../ianos/ianos.h"
+#include "../libs/fatfs/ff.h"
+#include "../mem/heap.h"
+#include "../soc/pmc.h"
+#include "../soc/t210.h"
+#include "../storage/nx_emmc.h"
+#include "../storage/sdmmc.h"
+#include "../utils/btn.h"
+#include "../utils/types.h"
+
+#include "../gfx/gfx.h"
+
+#define RELOC_META_OFF   0x7C
+#define PATCHED_RELOC_SZ 0x94
+
+#define WB_RST_ADDR 0x40010ED0
+#define WB_RST_SIZE 0x30
+
+u8 warmboot_reboot[] = {
+	0x14, 0x00, 0x9F, 0xE5, // LDR R0, =0x7000E450
+	0x01, 0x10, 0xB0, 0xE3, // MOVS R1, #1
+	0x00, 0x10, 0x80, 0xE5, // STR R1, [R0]
+	0x0C, 0x00, 0x9F, 0xE5, // LDR R0, =0x7000E400 
+	0x10, 0x10, 0xB0, 0xE3, // MOVS R1, #0x10
+	0x00, 0x10, 0x80, 0xE5, // STR R1, [R0]
+	0xFE, 0xFF, 0xFF, 0xEA, // LOOP
+	0x50, 0xE4, 0x00, 0x70, // #0x7000E450
+	0x00, 0xE4, 0x00, 0x70  // #0x7000E400
+};
+
+#define SEPT_PRI_ADDR   0x4003F000
+
+#define SEPT_PK1T_ADDR  0xC0400000
+#define SEPT_TCSZ_ADDR  (SEPT_PK1T_ADDR - 0x4)
+#define SEPT_STG1_ADDR  (SEPT_PK1T_ADDR + 0x2E100)
+#define SEPT_STG2_ADDR  (SEPT_PK1T_ADDR + 0x60E0)
+#define SEPT_PKG_SZ     (0x2F100 + WB_RST_SIZE)
+
+extern boot_cfg_t b_cfg;
+extern hekate_config h_cfg;
+extern const volatile ipl_ver_meta_t ipl_ver;
+
+extern void *sd_file_read(char *path);
+extern void sd_mount();
+extern void sd_unmount();
+extern bool is_ipl_updated(void *buf);
+extern void reloc_patcher(u32 payload_dst, u32 payload_src, u32 payload_size);
+
+void check_sept()
+{
+	// Check if non-hekate payload is used for sept and restore it.
+	if (h_cfg.sept_run && !f_stat("sept/payload.bak", NULL))
+	{
+		f_unlink("sept/payload.bin");
+		f_rename("sept/payload.bak", "sept/payload.bin");
+		return;
+	}
+
+	u8 *pkg1 = (u8 *)calloc(1, 0x40000);
+
+	sdmmc_storage_t storage;
+	sdmmc_t sdmmc;
+	if (!sdmmc_storage_init_mmc(&storage, &sdmmc, SDMMC_4, SDMMC_BUS_WIDTH_8, 4))
+	{
+		EPRINTF("Failed to init eMMC.");
+		goto out_free;
+	}
+	sdmmc_storage_set_mmc_partition(&storage, 1);
+
+	// Read package1.
+	sdmmc_storage_read(&storage, 0x100000 / NX_EMMC_BLOCKSIZE, 0x40000 / NX_EMMC_BLOCKSIZE, pkg1);
+	const pkg1_id_t *pkg1_id = pkg1_identify(pkg1);
+	if (!pkg1_id)
+	{
+		gfx_con.fntsz = 16;
+		EPRINTF("Unknown pkg1 version.");
+		goto out_free;
+	}
+
+	if (pkg1_id->kb >= KB_FIRMWARE_VERSION_700 && !h_cfg.sept_run)
+	{
+		sdmmc_storage_end(&storage);
+		reboot_to_sept((u8 *)pkg1 + pkg1_id->tsec_off);
+	}
+
+out_free:
+	free(pkg1);
+	sdmmc_storage_end(&storage);
+}
+
+int reboot_to_sept(const u8 *tsec_fw)
+{
+	FIL fp;
+
+	// Copy warmboot reboot code and TSEC fw.
+	memcpy((u8 *)(SEPT_PK1T_ADDR - WB_RST_SIZE), (u8 *)warmboot_reboot, sizeof(warmboot_reboot));
+	memcpy((void *)SEPT_PK1T_ADDR, tsec_fw, 0x3000);
+	*(vu32 *)SEPT_TCSZ_ADDR = 0x3000;
+	
+	// Copy sept-primary.
+	if (f_open(&fp, "sept/sept-primary.bin", FA_READ))
+		goto error;
+
+	if (f_read(&fp, (u8 *)SEPT_STG1_ADDR, f_size(&fp), NULL))
+	{
+		f_close(&fp);
+		goto error;
+	}
+	f_close(&fp);
+
+	// Copy sept-secondary.
+	if (f_open(&fp, "sept/sept-secondary.enc", FA_READ))
+		goto error;
+
+	if (f_read(&fp, (u8 *)SEPT_STG2_ADDR, f_size(&fp), NULL))
+	{
+		f_close(&fp);
+		goto error;
+	}
+	f_close(&fp);
+
+	b_cfg.boot_cfg |= (BOOT_CFG_AUTOBOOT_EN | BOOT_CFG_SEPT_RUN);
+
+	bool update_sept_payload = true;
+	if (!f_open(&fp, "sept/payload.bin", FA_READ | FA_WRITE))
+	{
+		ipl_ver_meta_t tmp_ver;
+		f_lseek(&fp, PATCHED_RELOC_SZ + sizeof(boot_cfg_t));
+		f_read(&fp, &tmp_ver, sizeof(ipl_ver_meta_t), NULL);
+
+		if (tmp_ver.magic == ipl_ver.magic)
+		{
+			if (tmp_ver.version == ipl_ver.version)
+			{
+				// Save auto boot config to sept payload, if any.
+				boot_cfg_t *tmp_cfg = malloc(sizeof(boot_cfg_t));
+				memcpy(tmp_cfg, &b_cfg, sizeof(boot_cfg_t));
+				f_lseek(&fp, PATCHED_RELOC_SZ);
+				f_write(&fp, tmp_cfg, sizeof(boot_cfg_t), NULL);
+				f_close(&fp);
+				update_sept_payload = false;
+			}
+		}
+		else
+			f_rename("sept/payload.bin", "sept/payload.bak"); // Backup foreign payload.
+
+		f_close(&fp);
+	}
+
+	if (update_sept_payload)
+	{
+		volatile reloc_meta_t *reloc = (reloc_meta_t *)(IPL_LOAD_ADDR + RELOC_META_OFF);
+		f_open(&fp, "sept/payload.bin", FA_WRITE | FA_CREATE_ALWAYS);
+		f_write(&fp, (u8 *)reloc->start, reloc->end - reloc->start, NULL);
+		f_close(&fp);
+	}
+
+	sd_unmount();
+
+	u32 pk1t_sept = SEPT_PK1T_ADDR - (ALIGN(PATCHED_RELOC_SZ, 0x10) + WB_RST_SIZE);
+
+	void (*sept)() = (void *)pk1t_sept;
+
+	reloc_patcher(WB_RST_ADDR, pk1t_sept, SEPT_PKG_SZ);
+
+	// Patch SDRAM init to perform an SVC immediately after second write.
+	PMC(APBDEV_PMC_SCRATCH45) = 0x2E38DFFF;
+	PMC(APBDEV_PMC_SCRATCH46) = 0x6001DC28;
+	// Set SVC handler to jump to sept-primary in IRAM.
+	PMC(APBDEV_PMC_SCRATCH33) = SEPT_PRI_ADDR;
+	PMC(APBDEV_PMC_SCRATCH40) = 0x6000F208;
+
+	display_end();
+
+	(*sept)();
+
+error:
+	EPRINTF("Failed to run sept\n");
+	display_backlight_brightness(h_cfg.backlight, 1000);
+
+	btn_wait();
+
+	return 0;
+}

bootloader/hos/sept.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2019 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SEPT_H_
+#define _SEPT_H_
+
+#include "../utils/types.h"
+
+void check_sept();
+int reboot_to_sept(const u8 *tsec_fw);
+
+#endif

bootloader/ianos/ianos.c

@@ -27,8 +27,6 @@
 #define IRAM_LIB_ADDR 0x4002B000
 #define DRAM_LIB_ADDR 0xE0000000
 
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
 extern heap_t _heap;
 
 extern void *sd_file_read(char *path);

bootloader/libs/elfload/elfload.h

@@ -26,7 +26,6 @@
 
 #ifdef DEBUG
 #include "../../gfx/gfx.h"
-extern gfx_con_t gfx_con;
 #define EL_DEBUG(format, ...) \
 	gfx_printf(&gfx_con, format __VA_OPT__(, ) __VA_ARGS__)
 #else

bootloader/libs/fatfs/diskio.c

@@ -11,6 +11,8 @@
 #include "diskio.h"		/* FatFs lower layer API */
 #include "../../storage/sdmmc.h"
 
+#define SDMMC_UPPER_BUFFER 0xB8000000
+
 extern sdmmc_storage_t sd_storage;
 
 DSTATUS disk_status (
@@ -36,7 +38,7 @@ DRESULT disk_read (
 {
 	if ((u32)buff >= 0x90000000)
 		return sdmmc_storage_read(&sd_storage, sector, count, buff) ? RES_OK : RES_ERROR;
-	u8 *buf = (u8 *)0x98000000; //TODO: define this somewhere.
+	u8 *buf = (u8 *)SDMMC_UPPER_BUFFER; //TODO: define this somewhere.
 	if (sdmmc_storage_read(&sd_storage, sector, count, buf))
 	{
 		memcpy(buff, buf, 512 * count);
@@ -54,7 +56,7 @@ DRESULT disk_write (
 {
 	if ((u32)buff >= 0x90000000)
 		return sdmmc_storage_write(&sd_storage, sector, count, (void *)buff) ? RES_OK : RES_ERROR;
-	u8 *buf = (u8 *)0x98000000; //TODO: define this somewhere.
+	u8 *buf = (u8 *)SDMMC_UPPER_BUFFER; //TODO: define this somewhere.
 	memcpy(buf, buff, 512 * count);
 	if (sdmmc_storage_write(&sd_storage, sector, count, buf))
 		return RES_OK;

bootloader/libs/fatfs/ff.c

@@ -23,10 +23,8 @@
 
 #include "ff.h"			/* Declarations of FatFs API */
 #include "diskio.h"		/* Declarations of device I/O functions */
-
 #include "../../gfx/gfx.h"
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
+
 #define EFSPRINTF(text, ...) print_error(); gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFFF00, 0xFFFFFFFF);
 //#define EFSPRINTF(...)
 

bootloader/link.ld

@@ -1,9 +1,12 @@
 ENTRY(_start)
 
 SECTIONS {
-	PROVIDE(__ipl_start = 0x40008000);
+	PROVIDE(__ipl_start = IPL_LOAD_ADDR);
 	. = __ipl_start;
 	.text : {
+		*(.text._start);
+		*(._boot_cfg);
+		*(._ipl_version);
 		*(.text*);
 	}
 	.data : {

bootloader/main.c

@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2018 naehrwert
  *
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -25,6 +25,7 @@
 #include "gfx/logos.h"
 #include "gfx/tui.h"
 #include "hos/hos.h"
+#include "hos/sept.h"
 #include "ianos/ianos.h"
 #include "libs/compr/blz.h"
 #include "libs/fatfs/ff.h"
@@ -34,7 +35,6 @@
 #include "rtc/max77620-rtc.h"
 #include "soc/hw_init.h"
 #include "soc/i2c.h"
-#include "soc/pmc.h"
 #include "soc/t210.h"
 #include "soc/uart.h"
 #include "storage/sdmmc.h"
@@ -47,16 +47,6 @@
 #include "frontend/fe_tools.h"
 #include "frontend/fe_info.h"
 
-//TODO: ugly.
-gfx_ctxt_t gfx_ctxt;
-gfx_con_t gfx_con;
-
-//TODO: Create more macros (info, header, debug, etc) with different colors and utilize them for consistency.
-#define EPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, 0xFFCCCCCC)
-#define EPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, args, 0xFFCCCCCC)
-#define WPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, 0xFFCCCCCC)
-#define WPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, args, 0xFFCCCCCC)
-
 //TODO: ugly.
 sdmmc_t sd_sdmmc;
 sdmmc_storage_t sd_storage;
@@ -68,6 +58,13 @@ u8 *Kc_MENU_LOGO;
 #endif //MENU_LOGO_ENABLE
 
 hekate_config h_cfg;
+boot_cfg_t __attribute__((section ("._boot_cfg"))) b_cfg;
+const volatile ipl_ver_meta_t __attribute__((section ("._ipl_version"))) ipl_ver = {
+	.magic = BL_MAGIC,
+	.version = (BL_VER_MJ + '0') | ((BL_VER_MN + '0') << 8) | ((BL_VER_HF + '0') << 16),
+	.rsvd0 = 0,
+	.rsvd1 = 0
+};
 
 bool sd_mount()
 {
@@ -118,10 +115,12 @@ void *sd_file_read(char *path)
 	u8 *ptr = buf;
 	while (size > 0)
 	{
-		u32 rsize = MIN(size, 512 * 512);
+		u32 rsize = MIN(size, 512 * 8192);
 		if (f_read(&fp, ptr, rsize, NULL) != FR_OK)
 		{
 			free(buf);
+			f_close(&fp);
+
 			return NULL;
 		}
 
@@ -191,56 +190,6 @@ void emmcsn_path_impl(char *path, char *sub_dir, char *filename, sdmmc_storage_t
 		sdmmc_storage_end(&storage2);
 }
 
-void panic(u32 val)
-{
-	// Set panic code.
-	PMC(APBDEV_PMC_SCRATCH200) = val;
-	//PMC(APBDEV_PMC_CRYPTO_OP) = 1; // Disable SE.
-	TMR(TIMER_WDT4_UNLOCK_PATTERN) = TIMER_MAGIC_PTRN;
-	TMR(TIMER_TMR9_TMR_PTV) = TIMER_EN | TIMER_PER_EN;
-	TMR(TIMER_WDT4_CONFIG)  = TIMER_SRC(9) | TIMER_PER(1) | TIMER_PMCRESET_EN;
-	TMR(TIMER_WDT4_COMMAND) = TIMER_START_CNT;
-	while (1)
-		;
-}
-
-void reboot_normal()
-{
-	sd_unmount();
-#ifdef MENU_LOGO_ENABLE
-	free(Kc_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
-	display_end();
-	panic(0x21); // Bypass fuse programming in package1.
-}
-
-void reboot_rcm()
-{
-	sd_unmount();
-#ifdef MENU_LOGO_ENABLE
-	free(Kc_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
-	display_end();
-	PMC(APBDEV_PMC_SCRATCH0) = 2; // Reboot into rcm.
-	PMC(APBDEV_PMC_CNTRL) |= PMC_CNTRL_MAIN_RST;
-	while (true)
-		usleep(1);
-}
-
-void power_off()
-{
-	sd_unmount();
-
-	// Stop the alarm, in case we injected and powered off too fast.
-	max77620_rtc_stop_alarm();
-
-#ifdef MENU_LOGO_ENABLE
-	free(Kc_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
-	//TODO: we should probably make sure all regulators are powered off properly.
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1, MAX77620_ONOFFCNFG1_PWR_OFF);
-}
-
 void check_power_off_from_hos()
 {
 	// Power off on AutoRCM wakeup from HOS shutdown. For modchips/dongles.
@@ -261,7 +210,7 @@ void check_power_off_from_hos()
 
 			display_backlight_brightness(10, 5000);
 			display_backlight_brightness(100, 25000);
-			usleep(600000);
+			msleep(600);
 			display_backlight_brightness(0, 20000);
 		}
 		power_off();
@@ -269,42 +218,53 @@ void check_power_off_from_hos()
 }
 
 // This is a safe and unused DRAM region for our payloads.
-#define IPL_LOAD_ADDR      0x40008000
-#define EXT_PAYLOAD_ADDR   0xC03C0000
-#define PATCHED_RELOC_SZ   0x94
-#define RCM_PAYLOAD_ADDR   (EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10))
-#define PAYLOAD_ENTRY      0x40010000
-#define CBFS_SDRAM_EN_ADDR 0x4003e000
-#define COREBOOT_ADDR      (0xD0000000 - 0x100000)
+#define RELOC_META_OFF      0x7C
+#define PATCHED_RELOC_SZ    0x94
+#define PATCHED_RELOC_STACK 0x40007000
+#define PATCHED_RELOC_ENTRY 0x40010000
+#define EXT_PAYLOAD_ADDR    0xC03C0000
+#define RCM_PAYLOAD_ADDR    (EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10))
+#define COREBOOT_ADDR       (0xD0000000 - 0x100000)
+#define CBFS_DRAM_EN_ADDR   0x4003e000
+#define  CBFS_DRAM_MAGIC    0x4452414D // "DRAM"
 
-void (*ext_payload_ptr)() = (void *)EXT_PAYLOAD_ADDR;
-void (*update_ptr)() = (void *)RCM_PAYLOAD_ADDR;
-
-void reloc_patcher(u32 payload_size)
+void reloc_patcher(u32 payload_dst, u32 payload_src, u32 payload_size)
 {
-	static const u32 START_OFF = 0x7C;
-	static const u32 PAYLOAD_END_OFF = 0x84;
-	static const u32 IPL_START_OFF = 0x88;
+	memcpy((u8 *)payload_src, (u8 *)IPL_LOAD_ADDR, PATCHED_RELOC_SZ);
 
-	memcpy((u8 *)EXT_PAYLOAD_ADDR, (u8 *)IPL_LOAD_ADDR, PATCHED_RELOC_SZ);
+	volatile reloc_meta_t *relocator = (reloc_meta_t *)(payload_src + RELOC_META_OFF);
 
-	*(vu32 *)(EXT_PAYLOAD_ADDR + START_OFF) = PAYLOAD_ENTRY - ALIGN(PATCHED_RELOC_SZ, 0x10);
-	*(vu32 *)(EXT_PAYLOAD_ADDR + PAYLOAD_END_OFF) = PAYLOAD_ENTRY + payload_size;
-	*(vu32 *)(EXT_PAYLOAD_ADDR + IPL_START_OFF) = PAYLOAD_ENTRY;
+	relocator->start = payload_dst - ALIGN(PATCHED_RELOC_SZ, 0x10);
+	relocator->stack = PATCHED_RELOC_STACK;
+	relocator->end   = payload_dst + payload_size;
+	relocator->ep    = payload_dst;
 
 	if (payload_size == 0x7000)
 	{
-		memcpy((u8 *)(EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10)), (u8 *)COREBOOT_ADDR, 0x7000); //Bootblock
-		*(vu32 *)CBFS_SDRAM_EN_ADDR = 0x4452414D;
+		memcpy((u8 *)(payload_src + ALIGN(PATCHED_RELOC_SZ, 0x10)), (u8 *)COREBOOT_ADDR, 0x7000); //Bootblock
+		*(vu32 *)CBFS_DRAM_EN_ADDR = CBFS_DRAM_MAGIC;
 	}
 }
 
-#define BOOTLOADER_UPDATED_MAGIC      0x424F4F54 // "BOOT".
-#define BOOTLOADER_UPDATED_MAGIC_ADDR 0x4003E000
+bool is_ipl_updated(void *buf)
+{
+	ipl_ver_meta_t *update_ft = (ipl_ver_meta_t *)(buf + PATCHED_RELOC_SZ + sizeof(boot_cfg_t));	
+
+	if (update_ft->magic == ipl_ver.magic)
+	{
+		if (byte_swap_32(update_ft->version) <= byte_swap_32(ipl_ver.version))
+			return true;
+		return false;
+		
+	}
+	else
+		return true;
+}
 
 int launch_payload(char *path, bool update)
 {
-	gfx_clear_grey(&gfx_ctxt, 0x1B);
+	if (!update)
+		gfx_clear_grey(&gfx_ctxt, 0x1B);
 	gfx_con_setpos(&gfx_con, 0, 0);
 	if (!path)
 		return 1;
@@ -338,57 +298,39 @@ int launch_payload(char *path, bool update)
 		}
 
 		f_close(&fp);
-		if (!update)
-		{
-			free(path);
-			path = NULL;
-		}
-			
+		free(path);
+
+		if (update && is_ipl_updated(buf))
+			return 1;
 
-		if (update)
-		{
-			u8 *update_ft = calloc(1, 6);
-			memcpy(update_ft, buf + size - 6, 6);
-			update_ft[4] -= '0';
-			update_ft[5] -= '0';
-			if (*(u32 *)update_ft == 0x43544349)
-			{
-				if (update_ft[4] < BLVERSIONMJ || (update_ft[4] == BLVERSIONMJ && update_ft[5] <= BLVERSIONMN))
-				{
-					free(update_ft);
-					return 1;
-				}
-				*(vu32 *)BOOTLOADER_UPDATED_MAGIC_ADDR = BOOTLOADER_UPDATED_MAGIC;
-			}
-			else
-			{
-				free(update_ft);
-				return 1;
-			}
-				
-			free(update_ft);
-		}
 		sd_unmount();
 
 		if (size < 0x30000)
 		{
-			if (!update)
-				reloc_patcher(ALIGN(size, 0x10));
+			if (update)
+				memcpy((u8 *)(RCM_PAYLOAD_ADDR + PATCHED_RELOC_SZ), &b_cfg, sizeof(boot_cfg_t)); // Transfer boot cfg.
+			else
+				reloc_patcher(PATCHED_RELOC_ENTRY, EXT_PAYLOAD_ADDR, ALIGN(size, 0x10));
+
 			reconfig_hw_workaround(false, byte_swap_32(*(u32 *)(buf + size - sizeof(u32))));
 		}
 		else
 		{
-			reloc_patcher(0x7000);
-			if (*(vu32 *)CBFS_SDRAM_EN_ADDR != 0x4452414D)
-				return 1;
+			reloc_patcher(PATCHED_RELOC_ENTRY, EXT_PAYLOAD_ADDR, 0x7000);
 			reconfig_hw_workaround(true, 0);
 		}
 
+		void (*ext_payload_ptr)() = (void *)EXT_PAYLOAD_ADDR;
+		void (*update_ptr)() = (void *)RCM_PAYLOAD_ADDR;
+
 		// Launch our payload.
 		if (!update)
 			(*ext_payload_ptr)();
 		else
+		{
+			EMC(EMC_SCRATCH0) |= EMC_HEKA_UPD;
 			(*update_ptr)();
+		}
 	}
 
 	return 1;
@@ -396,22 +338,12 @@ int launch_payload(char *path, bool update)
 
 void auto_launch_update()
 {
-	FIL fp;
-	if (*(vu32 *)BOOTLOADER_UPDATED_MAGIC_ADDR == BOOTLOADER_UPDATED_MAGIC)
-		*(vu32 *)BOOTLOADER_UPDATED_MAGIC_ADDR = 0;
-	else
+	if (EMC(EMC_SCRATCH0) & EMC_HEKA_UPD)
+		EMC(EMC_SCRATCH0) &= ~EMC_HEKA_UPD;
+	else if (sd_mount())
 	{
-		if (sd_mount())
-		{
-			if (f_open(&fp, "bootloader/update.bin", FA_READ))
-				return;
-			else
-			{
-				f_close(&fp);
-				launch_payload("bootloader/update.bin", true);
-			}
-
-		}
+		if (!f_stat("bootloader/update.bin", NULL))
+			launch_payload("bootloader/update.bin", true);
 	}
 }
 
@@ -434,7 +366,7 @@ void launch_tools(u8 type)
 		if (!type)
 			memcpy(dir, "bootloader/payloads", 20);
 		else
-			memcpy(dir, "bootloader/libtools", 20);
+			memcpy(dir, "bootloader/modules", 19);
 
 		filelist = dirlist(dir, NULL, false);
 
@@ -479,7 +411,7 @@ void launch_tools(u8 type)
 			}
 		}
 		else
-			EPRINTF("No payloads or libraries found.");
+			EPRINTF("No payloads or modules found.");
 
 		free(ments);
 		free(filelist);
@@ -493,9 +425,6 @@ void launch_tools(u8 type)
 
 	if (file_sec)
 	{
-#ifdef MENU_LOGO_ENABLE
-		free(Kc_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
 		memcpy(dir + strlen(dir), "/", 2);
 		memcpy(dir + strlen(dir), file_sec, strlen(file_sec) + 1);
 
@@ -509,10 +438,6 @@ void launch_tools(u8 type)
 		}
 		else
 			ianos_loader(true, dir, DRAM_LIB, NULL);
-#ifdef MENU_LOGO_ENABLE
-		Kc_MENU_LOGO = (u8 *)malloc(0x6000);
-		blz_uncompress_srcdest(Kc_MENU_LOGO_blz, SZ_MENU_LOGO_BLZ, Kc_MENU_LOGO, SZ_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
 	}
 
 out:
@@ -523,13 +448,14 @@ out:
 }
 
 void launch_tools_payload() { launch_tools(0); }
-void launch_tools_library() { launch_tools(1); }
+void launch_tools_module() { launch_tools(1); }
 
 void ini_list_launcher()
 {
 	u8 max_entries = 61;
 	char *payload_path = NULL;
 
+	ini_sec_t *cfg_tmp = NULL;
 	ini_sec_t *cfg_sec = NULL;
 	LIST_INIT(ini_list_sections);
 
@@ -568,7 +494,35 @@ void ini_list_launcher()
 				menu_t menu = {
 					ments, "Launch ini configurations", 0, 0
 				};
-				cfg_sec = ini_clone_section((ini_sec_t *)tui_do_menu(&gfx_con, &menu));
+
+				cfg_tmp = (ini_sec_t *)tui_do_menu(&gfx_con, &menu);
+
+				if (cfg_tmp)
+				{
+					u32 non_cfg = 1;
+					for (int j = 2; j < i; j++)
+					{
+						if (ments[j].type != INI_CHOICE)
+							non_cfg++;
+
+						if (ments[j].data == cfg_tmp)
+						{
+							b_cfg.boot_cfg = BOOT_CFG_FROM_LAUNCH;
+							b_cfg.autoboot = j - non_cfg;
+							b_cfg.autoboot_list = 1;
+
+							break;
+						}
+					}
+				}
+
+				payload_path = ini_check_payload_section(cfg_tmp);
+
+				if (cfg_tmp && !payload_path)
+					check_sept();
+
+				cfg_sec = ini_clone_section(cfg_tmp);
+
 				if (!cfg_sec)
 				{
 					free(ments);
@@ -578,23 +532,17 @@ void ini_list_launcher()
 				}
 			}
 			else
-				EPRINTF("No ini configurations found.");
+				EPRINTF("No extra configs found.");
 			free(ments);
 			ini_free(&ini_list_sections);
 		}
 		else
-			EPRINTF("Could not find any ini\nin bootloader/ini folder!");
+			EPRINTF("Could not find any ini\nin bootloader/ini!");
 	}
 
 	if (!cfg_sec)
 		goto out;
 
-#ifdef MENU_LOGO_ENABLE
-	free(Kc_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
-
-	payload_path = ini_check_payload_section(cfg_sec);
-
 	if (payload_path)
 	{
 		ini_free_section(cfg_sec);
@@ -610,11 +558,6 @@ void ini_list_launcher()
 		btn_wait();
 	}
 
-#ifdef MENU_LOGO_ENABLE
-	Kc_MENU_LOGO = (u8 *)malloc(0x6000);
-	blz_uncompress_srcdest(Kc_MENU_LOGO_blz, SZ_MENU_LOGO_BLZ, Kc_MENU_LOGO, SZ_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
-
 out:
 	ini_free_section(cfg_sec);
 
@@ -626,6 +569,7 @@ void launch_firmware()
 	u8 max_entries = 61;
 	char *payload_path = NULL;
 
+	ini_sec_t *cfg_tmp = NULL;
 	ini_sec_t *cfg_sec = NULL;
 	LIST_INIT(ini_sections);
 
@@ -670,7 +614,7 @@ void launch_firmware()
 			if (i < 6)
 			{
 				ments[i].type = MENT_CAPTION;
-				ments[i].caption = "No main configurations found...";
+				ments[i].caption = "No main configs found...";
 				ments[i].color = 0xFFFFDD00;
 				i++;
 			}
@@ -678,7 +622,33 @@ void launch_firmware()
 			menu_t menu = {
 				ments, "Launch configurations", 0, 0
 			};
-			cfg_sec = ini_clone_section((ini_sec_t *)tui_do_menu(&gfx_con, &menu));
+
+			cfg_tmp = (ini_sec_t *)tui_do_menu(&gfx_con, &menu);
+
+			if (cfg_tmp)
+			{
+				u8 non_cfg = 4;
+				for (int j = 5; j < i; j++)
+				{
+					if (ments[j].type != INI_CHOICE)
+						non_cfg++;
+					if (ments[j].data == cfg_tmp)
+					{
+						b_cfg.boot_cfg = BOOT_CFG_FROM_LAUNCH;
+						b_cfg.autoboot = j - non_cfg;
+						b_cfg.autoboot_list = 0;
+
+						break;
+					}
+				}
+			}
+
+			payload_path = ini_check_payload_section(cfg_tmp);
+
+			if (cfg_tmp && !payload_path)
+				check_sept();
+
+			cfg_sec = ini_clone_section(cfg_tmp);
 			if (!cfg_sec)
 			{
 				free(ments);
@@ -691,7 +661,7 @@ void launch_firmware()
 			ini_free(&ini_sections);
 		}
 		else
-			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists in SD Card!");
+			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists!");
 	}
 
 	if (!cfg_sec)
@@ -703,11 +673,6 @@ void launch_firmware()
 		if (!(btn & BTN_POWER))
 			goto out;
 	}
-#ifdef MENU_LOGO_ENABLE
-	free(Kc_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
-
-	payload_path = ini_check_payload_section(cfg_sec);
 
 	if (payload_path)
 	{
@@ -721,11 +686,6 @@ void launch_firmware()
 	else if (!hos_launch(cfg_sec))
 		EPRINTF("Failed to launch firmware.");
 
-#ifdef MENU_LOGO_ENABLE
-	Kc_MENU_LOGO = (u8 *)malloc(0x6000);
-	blz_uncompress_srcdest(Kc_MENU_LOGO_blz, SZ_MENU_LOGO_BLZ, Kc_MENU_LOGO, SZ_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
-
 out:
 	ini_free_section(cfg_sec);
 	sd_unmount();
@@ -735,11 +695,12 @@ out:
 
 void auto_launch_firmware()
 {
-	auto_launch_update();
+	if (!h_cfg.sept_run)
+		auto_launch_update();
 
 	u8 *BOOTLOGO = NULL;
 	char *payload_path = NULL;
-	FIL fp;
+	u32 btn = 0;
 
 	struct _bmp_data
 	{
@@ -755,18 +716,17 @@ void auto_launch_firmware()
 	bool bootlogoFound = false;
 	char *bootlogoCustomEntry = NULL;
 
+	if (!(b_cfg.boot_cfg & BOOT_CFG_FROM_LAUNCH))
+		gfx_con.mute = true;
+
 	ini_sec_t *cfg_sec = NULL;
 	LIST_INIT(ini_sections);
 	LIST_INIT(ini_list_sections);
 
-	gfx_con.mute = true;
-
 	if (sd_mount())
 	{
-		if (f_open(&fp, "bootloader/hekate_ipl.ini", FA_READ))
+		if (f_stat("bootloader/hekate_ipl.ini", NULL))
 			create_config_entry();
-		else
-			f_close(&fp);
 
 		if (ini_parse(&ini_sections, "bootloader/hekate_ipl.ini", false))
 		{
@@ -790,16 +750,29 @@ void auto_launch_firmware()
 								h_cfg.autoboot_list = atoi(kv->val);
 							else if (!strcmp("bootwait", kv->key))
 								h_cfg.bootwait = atoi(kv->val);
-							else if (!strcmp("customlogo", kv->key))
-								h_cfg.customlogo = atoi(kv->val);
 							else if (!strcmp("verification", kv->key))
 								h_cfg.verification = atoi(kv->val);
 							else if (!strcmp("backlight", kv->key))
 								h_cfg.backlight = atoi(kv->val);
 							else if (!strcmp("autohosoff", kv->key))
 								h_cfg.autohosoff = atoi(kv->val);
+							else if (!strcmp("autonogc", kv->key))
+								h_cfg.autonogc = atoi(kv->val);
 						}
 						boot_entry_id++;
+
+						// Override autoboot, otherwise save it for a possbile sept run.
+						if (b_cfg.boot_cfg & BOOT_CFG_AUTOBOOT_EN)
+						{
+							h_cfg.autoboot = b_cfg.autoboot;
+							h_cfg.autoboot_list = b_cfg.autoboot_list;
+						}
+						else
+						{
+							b_cfg.autoboot = h_cfg.autoboot;
+							b_cfg.autoboot_list = h_cfg.autoboot_list;
+						}
+
 						continue;
 					}
 
@@ -810,7 +783,6 @@ void auto_launch_firmware()
 						{
 							if (!strcmp("logopath", kv->key))
 								bootlogoCustomEntry = kv->val;
-							gfx_printf(&gfx_con, "\n%s=%s\n\n", kv->key, kv->val);
 						}
 						break;
 					}
@@ -818,12 +790,11 @@ void auto_launch_firmware()
 				}
 			}
 
-			if (h_cfg.autohosoff)
+			if (h_cfg.autohosoff && !(b_cfg.boot_cfg & BOOT_CFG_AUTOBOOT_EN))
 				check_power_off_from_hos();
 
 			if (h_cfg.autoboot_list)
 			{
-				ini_free(&ini_sections);
 				ini_free_section(cfg_sec);
 				boot_entry_id = 1;
 				bootlogoCustomEntry = NULL;
@@ -844,7 +815,6 @@ void auto_launch_firmware()
 								{
 									if (!strcmp("logopath", kv->key))
 										bootlogoCustomEntry = kv->val;
-									gfx_printf(&gfx_con, "\n%s=%s\n\n", kv->key, kv->val);
 								}
 								break;
 							}
@@ -873,19 +843,16 @@ void auto_launch_firmware()
 	else
 		goto out;
 
-	if (h_cfg.customlogo)
+	u8 *bitmap = NULL;
+	if (!(b_cfg.boot_cfg & BOOT_CFG_FROM_LAUNCH) && h_cfg.bootwait)
 	{
-		u8 *bitmap = NULL;
-		if (bootlogoCustomEntry != NULL) // Check if user set custom logo path at the boot entry.
-		{
+		if (bootlogoCustomEntry) // Check if user set custom logo path at the boot entry.
 			bitmap = (u8 *)sd_file_read(bootlogoCustomEntry);
-			if (bitmap == NULL) // Custom entry bootlogo not found, trying default custom one.
-				bitmap = (u8 *)sd_file_read("bootloader/bootlogo.bmp");
-		}
-		else // User has not set a custom logo path.
+
+		if (!bitmap) // Custom entry bootlogo not found, trying default custom one.
 			bitmap = (u8 *)sd_file_read("bootloader/bootlogo.bmp");
 
-		if (bitmap != NULL)
+		if (bitmap)
 		{
 			// Get values manually to avoid unaligned access.
 			bmpData.size = bitmap[2] | bitmap[3] << 8 |
@@ -899,7 +866,7 @@ void auto_launch_firmware()
 			// Sanity check.
 			if (bitmap[0] == 'B' &&
 				bitmap[1] == 'M' &&
-				bitmap[28] == 32 && //
+				bitmap[28] == 32 && // Only 32 bit BMPs allowed.
 				bmpData.size_x <= 720 &&
 				bmpData.size_y <= 1280)
 			{
@@ -922,38 +889,40 @@ void auto_launch_firmware()
 			else
 				free(bitmap);
 		}
+
+		// Render boot logo.
+		if (bootlogoFound)
+		{
+			gfx_render_bmp_argb(&gfx_ctxt, (u32 *)BOOTLOGO, bmpData.size_x, bmpData.size_y,
+				bmpData.pos_x, bmpData.pos_y);
+		}
+		else
+		{
+			gfx_clear_grey(&gfx_ctxt, 0x1B);
+			BOOTLOGO = (void *)malloc(0x4000);
+			blz_uncompress_srcdest(BOOTLOGO_BLZ, SZ_BOOTLOGO_BLZ, BOOTLOGO, SZ_BOOTLOGO);
+			gfx_set_rect_grey(&gfx_ctxt, BOOTLOGO, X_BOOTLOGO, Y_BOOTLOGO, 326, 544);
+		}
+		free(BOOTLOGO);
 	}
 
-	// Render boot logo.
-	if (bootlogoFound)
-	{
-		gfx_render_bmp_argb(&gfx_ctxt, (u32 *)BOOTLOGO, bmpData.size_x, bmpData.size_y,
-			bmpData.pos_x, bmpData.pos_y);
-	}
-	else
-	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		BOOTLOGO = (void *)malloc(0x4000);
-		blz_uncompress_srcdest(BOOTLOGO_BLZ, SZ_BOOTLOGO_BLZ, BOOTLOGO, SZ_BOOTLOGO);
-		gfx_set_rect_grey(&gfx_ctxt, BOOTLOGO, X_BOOTLOGO, Y_BOOTLOGO, 326, 544);
-	}
-	free(BOOTLOGO);
-
-	display_backlight_brightness(h_cfg.backlight, 1000);
-
-	// Wait before booting. If VOL- is pressed go into bootloader menu.
-	u32 btn = btn_wait_timeout(h_cfg.bootwait * 1000, BTN_VOL_DOWN);
-
-	if (btn & BTN_VOL_DOWN)
-		goto out;
-
 	ini_free(&ini_sections);
 	if (h_cfg.autoboot_list)
 		ini_free(&ini_list_sections);
 
-#ifdef MENU_LOGO_ENABLE
-	free(Kc_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
+	if (h_cfg.sept_run)
+		display_backlight_brightness(h_cfg.backlight, 0);
+	else if (h_cfg.bootwait)
+		display_backlight_brightness(h_cfg.backlight, 1000);
+
+	// Wait before booting. If VOL- is pressed go into bootloader menu.
+	if (!h_cfg.sept_run)
+	{
+		btn = btn_wait_timeout(h_cfg.bootwait * 1000, BTN_VOL_DOWN);
+
+		if (btn & BTN_VOL_DOWN)
+			goto out;
+	}
 
 	payload_path = ini_check_payload_section(cfg_sec);
 
@@ -964,12 +933,10 @@ void auto_launch_firmware()
 			free(payload_path);
 	}
 	else
+	{
+		check_sept();
 		hos_launch(cfg_sec);
-
-#ifdef MENU_LOGO_ENABLE
-	Kc_MENU_LOGO = (u8 *)malloc(ALIGN(SZ_MENU_LOGO, 0x10));
-	blz_uncompress_srcdest(Kc_MENU_LOGO_blz, SZ_MENU_LOGO_BLZ, Kc_MENU_LOGO, SZ_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
+	}
 
 out:
 	ini_free(&ini_sections);
@@ -979,13 +946,15 @@ out:
 
 	sd_unmount();
 	gfx_con.mute = false;
+
+	b_cfg.boot_cfg &= ~(BOOT_CFG_AUTOBOOT_EN | BOOT_CFG_FROM_LAUNCH);
 }
 
 void about()
 {
 	static const char credits[] =
-		"\nhekate     (C) 2018 naehrwert, st4rk\n\n"
-		"CTCaer mod (C) 2018 CTCaer\n"
+		"\nhekate     (c) 2018 naehrwert, st4rk\n\n"
+		"CTCaer mod (c) 2018 CTCaer\n"
 		" ___________________________________________\n\n"
 		"Thanks to: %kderrek, nedwill, plutoo,\n"
 		"           shuffle2, smea, thexyz, yellows8%k\n"
@@ -995,14 +964,14 @@ void about()
 		" ___________________________________________\n\n"
 		"Open source and free packages used:\n\n"
 		" - FatFs R0.13b,\n"
-		"   Copyright (C) 2018, ChaN\n\n"
+		"   Copyright (c) 2018, ChaN\n\n"
 		" - bcl-1.2.0,\n"
-		"   Copyright (C) 2003-2006, Marcus Geelnard\n\n"
+		"   Copyright (c) 2003-2006, Marcus Geelnard\n\n"
 		" - Atmosphere (SE sha256, prc id patches),\n"
-		"   Copyright (C) 2018, Atmosphere-NX\n\n"
+		"   Copyright (c) 2018, Atmosphere-NX\n\n"
 		" - elfload,\n"
-		"   Copyright (C) 2014, Owen Shepherd\n"
-		"   Copyright (C) 2018, M4xw\n"
+		"   Copyright (c) 2014, Owen Shepherd\n"
+		"   Copyright (c) 2018, M4xw\n"
 		" ___________________________________________\n\n";
 	static const char octopus[] =
 		"                         %k___\n"
@@ -1039,7 +1008,7 @@ ment_t ment_options[] = {
 	MDEF_CHGLINE(),
 	MDEF_HANDLER("Auto boot", config_autoboot),
 	MDEF_HANDLER("Boot time delay", config_bootdelay),
-	MDEF_HANDLER("Custom boot logo", config_customlogo),
+	MDEF_HANDLER("Auto NoGC", config_nogc),
 	MDEF_HANDLER("Auto HOS power off", config_auto_hos_poweroff),
 	MDEF_HANDLER("Backlight", config_backlight),
 	MDEF_END()
@@ -1077,7 +1046,7 @@ ment_t ment_restore[] = {
 	MDEF_CHGLINE(),
 	MDEF_CAPTION("------ Full --------", 0xFF0AB9E6),
 	MDEF_HANDLER("Restore eMMC BOOT0/1", restore_emmc_boot),
-	MDEF_HANDLER("Restore eMMC RAW GPP (exFAT only)", restore_emmc_rawnand),
+	MDEF_HANDLER("Restore eMMC RAW GPP", restore_emmc_rawnand),
 	MDEF_CHGLINE(),
 	MDEF_CAPTION("-- GPP Partitions --", 0xFF0AB9E6),
 	MDEF_HANDLER("Restore GPP partitions", restore_emmc_gpp_parts),
@@ -1118,8 +1087,8 @@ ment_t ment_tools[] = {
 	MDEF_CAPTION("-------- Misc --------", 0xFF0AB9E6),
 	MDEF_HANDLER("Dump package1/2", dump_packages12),
 	MDEF_HANDLER("Fix battery de-sync", fix_battery_desync),
-	MDEF_HANDLER("Fix archive bit (except Nintendo folder)", fix_sd_all_attr),
-	MDEF_HANDLER("Fix archive bit (Nintendo folder)", fix_sd_nin_attr),
+	MDEF_HANDLER("Fix archive bit (except Nintendo)", fix_sd_all_attr),
+	MDEF_HANDLER("Fix archive bit (Nintendo only)", fix_sd_nin_attr),
 	//MDEF_HANDLER("Fix fuel gauge configuration", fix_fuel_gauge_configuration),
 	//MDEF_HANDLER("Reset all battery cfg", reset_pmic_fuel_gauge_charger_config),
 	//MDEF_HANDLER("Minerva", minerva), // Uncomment for testing Minerva Training Cell
@@ -1150,9 +1119,13 @@ ment_t ment_top[] = {
 };
 menu_t menu_top = {
 	ment_top,
-	"hekate - CTCaer mod v4.6", 0, 0
+	"hekate - CTCaer mod v4.9.1", 0, 0
 };
 
+#define IPL_STACK_TOP  0x90010000
+#define IPL_HEAP_START 0x90020000
+#define IPL_HEAP_END   0xB5000000
+
 extern void pivot_stack(u32 stack_top);
 
 void ipl_main()
@@ -1161,13 +1134,13 @@ void ipl_main()
 	config_hw();
 
 	//Pivot the stack so we have enough space.
-	pivot_stack(0x90010000);
+	pivot_stack(IPL_STACK_TOP);
 
 	//Tegra/Horizon configuration goes to 0x80000000+, package2 goes to 0xA9800000, we place our heap in between.
-	heap_init(0x90020000);
+	heap_init(IPL_HEAP_START);
 
 #ifdef DEBUG_UART_PORT
-	uart_send(DEBUG_UART_PORT, (u8 *)"Hekate: Hello!\r\n", 18);
+	uart_send(DEBUG_UART_PORT, (u8 *)"Hekate: Hello!\r\n", 16);
 	uart_wait_idle(DEBUG_UART_PORT, UART_TX_IDLE);
 #endif
 
@@ -1184,9 +1157,9 @@ void ipl_main()
 	gfx_init_ctxt(&gfx_ctxt, fb, 720, 1280, 720);
 
 #ifdef MENU_LOGO_ENABLE
-	Kc_MENU_LOGO = (u8 *)malloc(0x6000);
+	Kc_MENU_LOGO = (u8 *)malloc(ALIGN(SZ_MENU_LOGO, 0x1000));
 	blz_uncompress_srcdest(Kc_MENU_LOGO_blz, SZ_MENU_LOGO_BLZ, Kc_MENU_LOGO, SZ_MENU_LOGO);
-#endif //MENU_LOGO_ENABLE
+#endif
 
 	gfx_con_init(&gfx_con, &gfx_ctxt);
 

bootloader/mem/heap.c

@@ -124,6 +124,6 @@ void *calloc(u32 num, u32 size)
 
 void free(void *buf)
 {
-	if ((buf != NULL) || ((u32)buf > (_heap.start - 1)))
+	if ((u32)buf >= _heap.start)
 		_heap_free(&_heap, (u32)buf);
 }

bootloader/mem/sdram.c

@@ -1,5 +1,7 @@
 /*
  * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2018 balika011
+ * Copyright (c) 2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -23,6 +25,7 @@
 #include "../utils/util.h"
 #include "../soc/fuse.h"
 #include "../power/max77620.h"
+#include "../power/max7762x.h"
 #include "../soc/clock.h"
 
 #define CONFIG_SDRAM_COMPRESS_CFG
@@ -536,7 +539,7 @@ void sdram_init()
 	const sdram_params_t *params = (const sdram_params_t *)sdram_get_params();
 
 	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, 0x05);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD1, 40); //40 = (1000 * 1100 - 600000) / 12500 -> 1.1V
+	max77620_regulator_set_voltage(REGULATOR_SD1, 1100000);
 
 	PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
 	usleep(params->pmc_vddp_sel_wait);

bootloader/power/bq24193.c

@@ -148,7 +148,7 @@ int bq24193_get_property(enum BQ24193_reg_prop prop, int *value)
 
 void bq24193_fake_battery_removal()
 {
-	u8  value;
+	u8 value;
 
 	// Disable watchdog to keep BATFET disabled.
 	value = i2c_recv_byte(I2C_1, BQ24193_I2C_ADDR, BQ24193_ChrgTermTimer);

bootloader/power/max77620.h

@@ -2,6 +2,7 @@
  * Defining registers address and its bit definitions of MAX77620 and MAX20024
  *
  * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,275 +15,277 @@
 #define MAX77620_I2C_ADDR 0x3C
 
 /* GLOBAL, PMIC, GPIO, FPS, ONOFFC, CID Registers */
-#define MAX77620_REG_CNFGGLBL1			0x00
-#define MAX77620_REG_CNFGGLBL2			0x01
-#define MAX77620_REG_CNFGGLBL3			0x02
-#define MAX77620_REG_CNFG1_32K			0x03
-#define MAX77620_REG_CNFGBBC			0x04
-#define MAX77620_REG_IRQTOP			0x05
-#define MAX77620_REG_INTLBT			0x06
-#define MAX77620_REG_IRQSD			0x07
-#define MAX77620_REG_IRQ_LVL2_L0_7		0x08
-#define MAX77620_REG_IRQ_LVL2_L8		0x09
-#define MAX77620_REG_IRQ_LVL2_GPIO		0x0A
-#define MAX77620_REG_ONOFFIRQ			0x0B
-#define MAX77620_REG_NVERC			0x0C
-#define MAX77620_REG_IRQTOPM			0x0D
-#define MAX77620_REG_INTENLBT			0x0E
-#define MAX77620_REG_IRQMASKSD			0x0F
-#define MAX77620_REG_IRQ_MSK_L0_7		0x10
-#define MAX77620_REG_IRQ_MSK_L8			0x11
-#define MAX77620_REG_ONOFFIRQM			0x12
-#define MAX77620_REG_STATLBT			0x13
-#define MAX77620_REG_STATSD			0x14
-#define MAX77620_REG_ONOFFSTAT			0x15
+#define MAX77620_REG_CNFGGLBL1      0x00
+#define  MAX77620_CNFGGLBL1_LBDAC_EN          (1 << 7)
+#define  MAX77620_CNFGGLBL1_MPPLD             (1 << 6)
+#define  MAX77620_CNFGGLBL1_LBHYST            ((1 << 5) | (1 << 4))
+#define  MAX77620_CNFGGLBL1_LBHYST_N          (1 << 4)
+#define  MAX77620_CNFGGLBL1_LBDAC             0x0E
+#define  MAX77620_CNFGGLBL1_LBDAC_N           (1 << 1)
+#define  MAX77620_CNFGGLBL1_LBRSTEN           (1 << 0)
+
+#define MAX77620_REG_CNFGGLBL2      0x01
+#define MAX77620_REG_CNFGGLBL3      0x02
+#define  MAX77620_WDTC_MASK                   0x3
+#define  MAX77620_WDTOFFC                     (1 << 4)
+#define  MAX77620_WDTSLPC                     (1 << 3)
+#define  MAX77620_WDTEN                       (1 << 2)
+#define  MAX77620_TWD_MASK                    0x3
+#define  MAX77620_TWD_2s                      0x0
+#define  MAX77620_TWD_16s                     0x1
+#define  MAX77620_TWD_64s                     0x2
+#define  MAX77620_TWD_128s                    0x3
+
+#define MAX77620_REG_CNFG1_32K      0x03
+#define  MAX77620_CNFG1_32K_OUT0_EN           (1 << 2)
+
+#define MAX77620_REG_CNFGBBC        0x04
+#define  MAX77620_CNFGBBC_ENABLE              (1 << 0)
+#define  MAX77620_CNFGBBC_CURRENT_MASK        0x06
+#define  MAX77620_CNFGBBC_CURRENT_SHIFT       1
+#define  MAX77620_CNFGBBC_VOLTAGE_MASK        0x18
+#define  MAX77620_CNFGBBC_VOLTAGE_SHIFT       3
+#define  MAX77620_CNFGBBC_LOW_CURRENT_DISABLE (1 << 5)
+#define  MAX77620_CNFGBBC_RESISTOR_MASK       0xC0
+#define  MAX77620_CNFGBBC_RESISTOR_SHIFT      6
+#define  MAX77620_CNFGBBC_RESISTOR_100        (0 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+#define  MAX77620_CNFGBBC_RESISTOR_1K         (1 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+#define  MAX77620_CNFGBBC_RESISTOR_3K         (2 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+#define  MAX77620_CNFGBBC_RESISTOR_6K         (3 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+
+#define MAX77620_REG_IRQTOP         0x05
+#define  MAX77620_IRQ_TOP_GLBL_MASK           (1 << 7)
+#define  MAX77620_IRQ_TOP_SD_MASK             (1 << 6)
+#define  MAX77620_IRQ_TOP_LDO_MASK            (1 << 5)
+#define  MAX77620_IRQ_TOP_GPIO_MASK           (1 << 4)
+#define  MAX77620_IRQ_TOP_RTC_MASK            (1 << 3)
+#define  MAX77620_IRQ_TOP_32K_MASK            (1 << 2)
+#define  MAX77620_IRQ_TOP_ONOFF_MASK          (1 << 1)
+
+#define MAX77620_REG_INTLBT         0x06
+#define MAX77620_REG_IRQTOPM        0x0D
+#define  MAX77620_IRQ_LBM_MASK                (1 << 3)
+#define  MAX77620_IRQ_TJALRM1_MASK            (1 << 2)
+#define  MAX77620_IRQ_TJALRM2_MASK            (1 << 1)
+
+#define MAX77620_REG_IRQSD          0x07
+#define MAX77620_REG_IRQ_LVL2_L0_7  0x08
+#define MAX77620_REG_IRQ_LVL2_L8    0x09
+#define MAX77620_REG_IRQ_LVL2_GPIO  0x0A
+#define MAX77620_REG_ONOFFIRQ       0x0B
+#define MAX77620_REG_NVERC          0x0C
+
+#define MAX77620_REG_INTENLBT       0x0E
+#define  MAX77620_GLBLM_MASK                  (1 << 0)
+
+#define MAX77620_REG_IRQMASKSD      0x0F
+#define MAX77620_REG_IRQ_MSK_L0_7   0x10
+#define MAX77620_REG_IRQ_MSK_L8     0x11
+#define MAX77620_REG_ONOFFIRQM      0x12
+#define MAX77620_REG_STATLBT        0x13
+#define MAX77620_REG_STATSD         0x14
+#define MAX77620_REG_ONOFFSTAT      0x15
 
 /* SD and LDO Registers */
-#define MAX77620_REG_SD0			0x16
-#define MAX77620_REG_SD1			0x17
-#define MAX77620_REG_SD2			0x18
-#define MAX77620_REG_SD3			0x19
-#define MAX77620_REG_SD4			0x1A
-#define MAX77620_REG_DVSSD0			0x1B
-#define MAX77620_REG_DVSSD1			0x1C
-#define MAX77620_REG_SD0_CFG			0x1D
-#define MAX77620_REG_SD1_CFG			0x1E
-#define MAX77620_REG_SD2_CFG			0x1F
-#define MAX77620_REG_SD3_CFG			0x20
-#define MAX77620_REG_SD4_CFG			0x21
-#define MAX77620_REG_SD_CFG2			0x22
-#define MAX77620_REG_LDO0_CFG			0x23
-#define MAX77620_REG_LDO0_CFG2			0x24
-#define MAX77620_REG_LDO1_CFG			0x25
-#define MAX77620_REG_LDO1_CFG2			0x26
-#define MAX77620_REG_LDO2_CFG			0x27
-#define MAX77620_REG_LDO2_CFG2			0x28
-#define MAX77620_REG_LDO3_CFG			0x29
-#define MAX77620_REG_LDO3_CFG2			0x2A
-#define MAX77620_REG_LDO4_CFG			0x2B
-#define MAX77620_REG_LDO4_CFG2			0x2C
-#define MAX77620_REG_LDO5_CFG			0x2D
-#define MAX77620_REG_LDO5_CFG2			0x2E
-#define MAX77620_REG_LDO6_CFG			0x2F
-#define MAX77620_REG_LDO6_CFG2			0x30
-#define MAX77620_REG_LDO7_CFG			0x31
-#define MAX77620_REG_LDO7_CFG2			0x32
-#define MAX77620_REG_LDO8_CFG			0x33
-#define MAX77620_REG_LDO8_CFG2			0x34
-#define MAX77620_REG_LDO_CFG3			0x35
+#define MAX77620_REG_SD0            0x16
+#define MAX77620_REG_SD1            0x17
+#define MAX77620_REG_SD2            0x18
+#define MAX77620_REG_SD3            0x19
+#define MAX77620_REG_SD4            0x1A
+#define  MAX77620_SDX_VOLT_MASK               0xFF
+#define  MAX77620_SD0_VOLT_MASK               0x3F
+#define  MAX77620_SD1_VOLT_MASK               0x7F
+#define  MAX77620_LDO_VOLT_MASK               0x3F
+#define MAX77620_REG_DVSSD0         0x1B
+#define MAX77620_REG_DVSSD1         0x1C
+#define MAX77620_REG_SD0_CFG        0x1D
+#define MAX77620_REG_SD1_CFG        0x1E
+#define MAX77620_REG_SD2_CFG        0x1F
+#define MAX77620_REG_SD3_CFG        0x20
+#define MAX77620_REG_SD4_CFG        0x21
+#define MAX77620_REG_SD_CFG2        0x22
+#define MAX77620_REG_LDO0_CFG       0x23
+#define MAX77620_REG_LDO0_CFG2      0x24
+#define MAX77620_REG_LDO1_CFG       0x25
+#define MAX77620_REG_LDO1_CFG2      0x26
+#define MAX77620_REG_LDO2_CFG       0x27
+#define MAX77620_REG_LDO2_CFG2      0x28
+#define MAX77620_REG_LDO3_CFG       0x29
+#define MAX77620_REG_LDO3_CFG2      0x2A
+#define MAX77620_REG_LDO4_CFG       0x2B
+#define MAX77620_REG_LDO4_CFG2      0x2C
+#define MAX77620_REG_LDO5_CFG       0x2D
+#define MAX77620_REG_LDO5_CFG2      0x2E
+#define MAX77620_REG_LDO6_CFG       0x2F
+#define MAX77620_REG_LDO6_CFG2      0x30
+#define MAX77620_REG_LDO7_CFG       0x31
+#define MAX77620_REG_LDO7_CFG2      0x32
+#define MAX77620_REG_LDO8_CFG       0x33
+#define MAX77620_REG_LDO8_CFG2      0x34
+#define  MAX77620_LDO_POWER_MODE_MASK         0xC0
+#define  MAX77620_LDO_POWER_MODE_SHIFT        6
+#define  MAX77620_POWER_MODE_NORMAL	          3
+#define  MAX77620_POWER_MODE_LPM              2
+#define  MAX77620_POWER_MODE_GLPM             1
+#define  MAX77620_POWER_MODE_DISABLE          0
+#define  MAX20024_LDO_CFG2_MPOK_MASK          (1 << 2)
+#define  MAX77620_LDO_CFG2_ADE_MASK           (1 << 1)
+#define  MAX77620_LDO_CFG2_ADE_DISABLE        0
+#define  MAX77620_LDO_CFG2_ADE_ENABLE         (1 << 1)
+#define  MAX77620_LDO_CFG2_SS_MASK            (1 << 0)
+#define  MAX77620_LDO_CFG2_SS_FAST            (1 << 0)
+#define  MAX77620_LDO_CFG2_SS_SLOW            0
 
-#define MAX77620_LDO_SLEW_RATE_MASK		0x1
+#define MAX77620_REG_LDO_CFG3       0x35
+#define  MAX77620_TRACK4_MASK                 (1 << 5)
+#define  MAX77620_TRACK4_SHIFT                5
 
-/* LDO Configuration 3 */
-#define MAX77620_TRACK4_MASK			(1 << 5)
-#define MAX77620_TRACK4_SHIFT			5
+#define MAX77620_LDO_SLEW_RATE_MASK 0x1
 
-/* Voltage */
-#define MAX77620_SDX_VOLT_MASK			0xFF
-#define MAX77620_SD0_VOLT_MASK			0x3F
-#define MAX77620_SD1_VOLT_MASK			0x7F
-#define MAX77620_LDO_VOLT_MASK			0x3F
+#define MAX77620_REG_GPIO0          0x36
+#define MAX77620_REG_GPIO1          0x37
+#define MAX77620_REG_GPIO2          0x38
+#define MAX77620_REG_GPIO3          0x39
+#define MAX77620_REG_GPIO4          0x3A
+#define MAX77620_REG_GPIO5          0x3B
+#define MAX77620_REG_GPIO6          0x3C
+#define MAX77620_REG_GPIO7          0x3D
+#define MAX77620_REG_PUE_GPIO       0x3E
+#define MAX77620_REG_PDE_GPIO       0x3F
+#define MAX77620_REG_AME_GPIO       0x40
 
-#define MAX77620_REG_GPIO0			0x36
-#define MAX77620_REG_GPIO1			0x37
-#define MAX77620_REG_GPIO2			0x38
-#define MAX77620_REG_GPIO3			0x39
-#define MAX77620_REG_GPIO4			0x3A
-#define MAX77620_REG_GPIO5			0x3B
-#define MAX77620_REG_GPIO6			0x3C
-#define MAX77620_REG_GPIO7			0x3D
-#define MAX77620_REG_PUE_GPIO			0x3E
-#define MAX77620_REG_PDE_GPIO			0x3F
-#define MAX77620_REG_AME_GPIO			0x40
-#define MAX77620_REG_ONOFFCNFG1			0x41
-#define MAX77620_REG_ONOFFCNFG2			0x42
+#define MAX77620_REG_ONOFFCNFG1     0x41
+#define  MAX77620_ONOFFCNFG1_SFT_RST          (1 << 7)
+#define  MAX77620_ONOFFCNFG1_MRT_MASK         0x38
+#define  MAX77620_ONOFFCNFG1_MRT_SHIFT        0x3
+#define  MAX77620_ONOFFCNFG1_SLPEN            (1 << 2)
+#define  MAX77620_ONOFFCNFG1_PWR_OFF          (1 << 1)
+#define  MAX20024_ONOFFCNFG1_CLRSE            0x18
+
+#define MAX77620_REG_ONOFFCNFG2     0x42
+#define  MAX77620_ONOFFCNFG2_SFT_RST_WK       (1 << 7)
+#define  MAX77620_ONOFFCNFG2_WD_RST_WK        (1 << 6)
+#define  MAX77620_ONOFFCNFG2_SLP_LPM_MSK      (1 << 5)
+#define  MAX77620_ONOFFCNFG2_WK_ALARM1        (1 << 2)
+#define  MAX77620_ONOFFCNFG2_WK_EN0           (1 << 0)
 
 /* FPS Registers */
-#define MAX77620_REG_FPS_CFG0			0x43
-#define MAX77620_REG_FPS_CFG1			0x44
-#define MAX77620_REG_FPS_CFG2			0x45
-#define MAX77620_REG_FPS_LDO0			0x46
-#define MAX77620_REG_FPS_LDO1			0x47
-#define MAX77620_REG_FPS_LDO2			0x48
-#define MAX77620_REG_FPS_LDO3			0x49
-#define MAX77620_REG_FPS_LDO4			0x4A
-#define MAX77620_REG_FPS_LDO5			0x4B
-#define MAX77620_REG_FPS_LDO6			0x4C
-#define MAX77620_REG_FPS_LDO7			0x4D
-#define MAX77620_REG_FPS_LDO8			0x4E
-#define MAX77620_REG_FPS_SD0			0x4F
-#define MAX77620_REG_FPS_SD1			0x50
-#define MAX77620_REG_FPS_SD2			0x51
-#define MAX77620_REG_FPS_SD3			0x52
-#define MAX77620_REG_FPS_SD4			0x53
-#define MAX77620_REG_FPS_NONE			0
-
-#define MAX77620_FPS_SRC_MASK			0xC0
-#define MAX77620_FPS_SRC_SHIFT			6
-#define MAX77620_FPS_PU_PERIOD_MASK		0x38
-#define MAX77620_FPS_PU_PERIOD_SHIFT		3
-#define MAX77620_FPS_PD_PERIOD_MASK		0x07
-#define MAX77620_FPS_PD_PERIOD_SHIFT		0
-#define MAX77620_FPS_TIME_PERIOD_MASK		0x38
-#define MAX77620_FPS_TIME_PERIOD_SHIFT		3
-#define MAX77620_FPS_EN_SRC_MASK		0x06
-#define MAX77620_FPS_EN_SRC_SHIFT		1
-#define MAX77620_FPS_ENFPS_SW_MASK		0x01
-#define MAX77620_FPS_ENFPS_SW			0x01
+#define MAX77620_REG_FPS_CFG0       0x43
+#define MAX77620_REG_FPS_CFG1       0x44
+#define MAX77620_REG_FPS_CFG2       0x45
+#define MAX77620_REG_FPS_LDO0       0x46
+#define MAX77620_REG_FPS_LDO1       0x47
+#define MAX77620_REG_FPS_LDO2       0x48
+#define MAX77620_REG_FPS_LDO3       0x49
+#define MAX77620_REG_FPS_LDO4       0x4A
+#define MAX77620_REG_FPS_LDO5       0x4B
+#define MAX77620_REG_FPS_LDO6       0x4C
+#define MAX77620_REG_FPS_LDO7       0x4D
+#define MAX77620_REG_FPS_LDO8       0x4E
+#define MAX77620_REG_FPS_SD0        0x4F
+#define MAX77620_REG_FPS_SD1        0x50
+#define MAX77620_REG_FPS_SD2        0x51
+#define MAX77620_REG_FPS_SD3        0x52
+#define MAX77620_REG_FPS_SD4        0x53
+#define MAX77620_REG_FPS_NONE       0
+#define  MAX77620_FPS_SRC_MASK                0xC0
+#define  MAX77620_FPS_SRC_SHIFT               6
+#define  MAX77620_FPS_PU_PERIOD_MASK          0x38
+#define  MAX77620_FPS_PU_PERIOD_SHIFT         3
+#define  MAX77620_FPS_PD_PERIOD_MASK          0x07
+#define  MAX77620_FPS_PD_PERIOD_SHIFT         0
 
 /* Minimum and maximum FPS period time (in microseconds) are
  * different for MAX77620 and Max20024.
  */
-#define MAX77620_FPS_PERIOD_MIN_US		40
-#define MAX20024_FPS_PERIOD_MIN_US		20
+#define MAX77620_FPS_COUNT 3
 
-#define MAX77620_FPS_PERIOD_MAX_US		2560
-#define MAX20024_FPS_PERIOD_MAX_US		5120
+#define MAX77620_FPS_PERIOD_MIN_US 40
+#define MAX20024_FPS_PERIOD_MIN_US 20
 
-#define MAX77620_REG_FPS_GPIO1			0x54
-#define MAX77620_REG_FPS_GPIO2			0x55
-#define MAX77620_REG_FPS_GPIO3			0x56
-#define MAX77620_REG_FPS_RSO			0x57
-#define MAX77620_REG_CID0			0x58
-#define MAX77620_REG_CID1			0x59
-#define MAX77620_REG_CID2			0x5A
-#define MAX77620_REG_CID3			0x5B
-#define MAX77620_REG_CID4			0x5C
-#define MAX77620_REG_CID5			0x5D
+#define MAX77620_FPS_PERIOD_MAX_US 2560
+#define MAX20024_FPS_PERIOD_MAX_US 5120
 
-#define MAX77620_REG_DVSSD4			0x5E
-#define MAX20024_REG_MAX_ADD			0x70
+#define MAX77620_REG_FPS_GPIO1      0x54
+#define MAX77620_REG_FPS_GPIO2      0x55
+#define MAX77620_REG_FPS_GPIO3      0x56
+#define  MAX77620_FPS_TIME_PERIOD_MASK        0x38
+#define  MAX77620_FPS_TIME_PERIOD_SHIFT       3
+#define  MAX77620_FPS_EN_SRC_MASK             0x06
+#define  MAX77620_FPS_EN_SRC_SHIFT            1
+#define  MAX77620_FPS_ENFPS_SW_MASK           0x01
+#define  MAX77620_FPS_ENFPS_SW                0x01
 
-#define MAX77620_CID_DIDM_MASK			0xF0
-#define MAX77620_CID_DIDM_SHIFT			4
+#define MAX77620_REG_FPS_RSO        0x57
+#define MAX77620_REG_CID0           0x58
+#define MAX77620_REG_CID1           0x59
+#define MAX77620_REG_CID2           0x5A
+#define MAX77620_REG_CID3           0x5B
+#define MAX77620_REG_CID4           0x5C
+#define MAX77620_REG_CID5           0x5D
+
+#define MAX77620_REG_DVSSD4         0x5E
+#define MAX20024_REG_MAX_ADD        0x70
+
+#define MAX77620_CID_DIDM_MASK                0xF0
+#define MAX77620_CID_DIDM_SHIFT               4
 
 /* CNCG2SD */
-#define MAX77620_SD_CNF2_ROVS_EN_SD1		(1 << 1)
-#define MAX77620_SD_CNF2_ROVS_EN_SD0		(1 << 2)
+#define MAX77620_SD_CNF2_ROVS_EN_SD1          (1 << 1)
+#define MAX77620_SD_CNF2_ROVS_EN_SD0          (1 << 2)
 
 /* Device Identification Metal */
-#define MAX77620_CID5_DIDM(n)			(((n) >> 4) & 0xF)
+#define MAX77620_CID5_DIDM(n) (((n) >> 4) & 0xF)
 /* Device Indentification OTP */
-#define MAX77620_CID5_DIDO(n)			((n) & 0xF)
+#define MAX77620_CID5_DIDO(n) ((n) & 0xF)
 
 /* SD CNFG1 */
-#define MAX77620_SD_SR_MASK			0xC0
-#define MAX77620_SD_SR_SHIFT			6
-#define MAX77620_SD_POWER_MODE_MASK		0x30
-#define MAX77620_SD_POWER_MODE_SHIFT		4
-#define MAX77620_SD_CFG1_ADE_MASK		(1 << 3)
-#define MAX77620_SD_CFG1_ADE_DISABLE		0
-#define MAX77620_SD_CFG1_ADE_ENABLE		(1 << 3)
-#define MAX77620_SD_FPWM_MASK			0x04
-#define MAX77620_SD_FPWM_SHIFT			2
-#define MAX77620_SD_FSRADE_MASK			0x01
-#define MAX77620_SD_FSRADE_SHIFT		0
-#define MAX77620_SD_CFG1_FPWM_SD_MASK		(1 << 2)
-#define MAX77620_SD_CFG1_FPWM_SD_SKIP		0
-#define MAX77620_SD_CFG1_FPWM_SD_FPWM		(1 << 2)
-#define MAX20024_SD_CFG1_MPOK_MASK		(1 << 1)
-#define MAX77620_SD_CFG1_FSRADE_SD_MASK		(1 << 0)
-#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE	0
-#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE	(1 << 0)
+#define MAX77620_SD_SR_MASK                   0xC0
+#define MAX77620_SD_SR_SHIFT                  6
+#define MAX77620_SD_POWER_MODE_MASK           0x30
+#define MAX77620_SD_POWER_MODE_SHIFT          4
+#define MAX77620_SD_CFG1_ADE_MASK             (1 << 3)
+#define MAX77620_SD_CFG1_ADE_DISABLE          0
+#define MAX77620_SD_CFG1_ADE_ENABLE           (1 << 3)
+#define MAX77620_SD_FPWM_MASK                 0x04
+#define MAX77620_SD_FPWM_SHIFT                2
+#define MAX77620_SD_FSRADE_MASK               0x01
+#define MAX77620_SD_FSRADE_SHIFT              0
+#define MAX77620_SD_CFG1_FPWM_SD_MASK         (1 << 2)
+#define MAX77620_SD_CFG1_FPWM_SD_SKIP         0
+#define MAX77620_SD_CFG1_FPWM_SD_FPWM         (1 << 2)
+#define MAX20024_SD_CFG1_MPOK_MASK            (1 << 1)
+#define MAX77620_SD_CFG1_FSRADE_SD_MASK       (1 << 0)
+#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE    0
+#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE     (1 << 0)
 
-/* LDO_CNFG2 */
-#define MAX77620_LDO_POWER_MODE_MASK		0xC0
-#define MAX77620_LDO_POWER_MODE_SHIFT		6
-#define MAX20024_LDO_CFG2_MPOK_MASK		(1 << 2)
-#define MAX77620_LDO_CFG2_ADE_MASK		(1 << 1)
-#define MAX77620_LDO_CFG2_ADE_DISABLE		0
-#define MAX77620_LDO_CFG2_ADE_ENABLE		(1 << 1)
-#define MAX77620_LDO_CFG2_SS_MASK		(1 << 0)
-#define MAX77620_LDO_CFG2_SS_FAST		(1 << 0)
-#define MAX77620_LDO_CFG2_SS_SLOW		0
+#define MAX77620_CNFG_GPIO_DRV_MASK           (1 << 0)
+#define MAX77620_CNFG_GPIO_DRV_PUSHPULL       (1 << 0)
+#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN      0
+#define MAX77620_CNFG_GPIO_DIR_MASK           (1 << 1)
+#define MAX77620_CNFG_GPIO_DIR_INPUT          (1 << 1)
+#define MAX77620_CNFG_GPIO_DIR_OUTPUT         0
+#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK     (1 << 2)
+#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK    (1 << 3)
+#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH    (1 << 3)
+#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW     0
+#define MAX77620_CNFG_GPIO_INT_MASK           (0x3 << 4)
+#define MAX77620_CNFG_GPIO_INT_FALLING        (1 << 4)
+#define MAX77620_CNFG_GPIO_INT_RISING         (1 << 5)
+#define MAX77620_CNFG_GPIO_DBNC_MASK          (0x3 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_None          (0x0 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_8ms           (0x1 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_16ms          (0x2 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_32ms          (0x3 << 6)
 
-#define MAX77620_IRQ_TOP_GLBL_MASK		(1 << 7)
-#define MAX77620_IRQ_TOP_SD_MASK		(1 << 6)
-#define MAX77620_IRQ_TOP_LDO_MASK		(1 << 5)
-#define MAX77620_IRQ_TOP_GPIO_MASK		(1 << 4)
-#define MAX77620_IRQ_TOP_RTC_MASK		(1 << 3)
-#define MAX77620_IRQ_TOP_32K_MASK		(1 << 2)
-#define MAX77620_IRQ_TOP_ONOFF_MASK		(1 << 1)
-
-#define MAX77620_IRQ_LBM_MASK			(1 << 3)
-#define MAX77620_IRQ_TJALRM1_MASK		(1 << 2)
-#define MAX77620_IRQ_TJALRM2_MASK		(1 << 1)
-
-#define MAX77620_CNFG_GPIO_DRV_MASK		(1 << 0)
-#define MAX77620_CNFG_GPIO_DRV_PUSHPULL		(1 << 0)
-#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN	0
-#define MAX77620_CNFG_GPIO_DIR_MASK		(1 << 1)
-#define MAX77620_CNFG_GPIO_DIR_INPUT		(1 << 1)
-#define MAX77620_CNFG_GPIO_DIR_OUTPUT		0
-#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK	(1 << 2)
-#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK	(1 << 3)
-#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH	(1 << 3)
-#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW	0
-#define MAX77620_CNFG_GPIO_INT_MASK		(0x3 << 4)
-#define MAX77620_CNFG_GPIO_INT_FALLING		(1 << 4)
-#define MAX77620_CNFG_GPIO_INT_RISING		(1 << 5)
-#define MAX77620_CNFG_GPIO_DBNC_MASK		(0x3 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_None		(0x0 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_8ms		(0x1 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_16ms		(0x2 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_32ms		(0x3 << 6)
-
-#define MAX77620_IRQ_LVL2_GPIO_EDGE0		(1 << 0)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE1		(1 << 1)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE2		(1 << 2)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE3		(1 << 3)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE4		(1 << 4)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE5		(1 << 5)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE6		(1 << 6)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE7		(1 << 7)
-
-#define MAX77620_CNFG1_32K_OUT0_EN		(1 << 2)
-
-#define MAX77620_ONOFFCNFG1_SFT_RST		(1 << 7)
-#define MAX77620_ONOFFCNFG1_MRT_MASK		0x38
-#define MAX77620_ONOFFCNFG1_MRT_SHIFT		0x3
-#define MAX77620_ONOFFCNFG1_SLPEN		(1 << 2)
-#define MAX77620_ONOFFCNFG1_PWR_OFF		(1 << 1)
-#define MAX20024_ONOFFCNFG1_CLRSE		0x18
-
-#define MAX77620_ONOFFCNFG2_SFT_RST_WK		(1 << 7)
-#define MAX77620_ONOFFCNFG2_WD_RST_WK		(1 << 6)
-#define MAX77620_ONOFFCNFG2_SLP_LPM_MSK		(1 << 5)
-#define MAX77620_ONOFFCNFG2_WK_ALARM1		(1 << 2)
-#define MAX77620_ONOFFCNFG2_WK_EN0		(1 << 0)
-
-#define MAX77620_GLBLM_MASK			(1 << 0)
-
-#define MAX77620_WDTC_MASK			0x3
-#define MAX77620_WDTOFFC			(1 << 4)
-#define MAX77620_WDTSLPC			(1 << 3)
-#define MAX77620_WDTEN				(1 << 2)
-
-#define MAX77620_TWD_MASK			0x3
-#define MAX77620_TWD_2s				0x0
-#define MAX77620_TWD_16s			0x1
-#define MAX77620_TWD_64s			0x2
-#define MAX77620_TWD_128s			0x3
-
-#define MAX77620_CNFGGLBL1_LBDAC_EN		(1 << 7)
-#define MAX77620_CNFGGLBL1_MPPLD		(1 << 6)
-#define MAX77620_CNFGGLBL1_LBHYST		((1 << 5) | (1 << 4))
-#define MAX77620_CNFGGLBL1_LBHYST_N		(1 << 4)
-#define MAX77620_CNFGGLBL1_LBDAC		0x0E
-#define MAX77620_CNFGGLBL1_LBDAC_N		(1 << 1)
-#define MAX77620_CNFGGLBL1_LBRSTEN		(1 << 0)
-
-/* CNFG BBC registers */
-#define MAX77620_CNFGBBC_ENABLE			(1 << 0)
-#define MAX77620_CNFGBBC_CURRENT_MASK		0x06
-#define MAX77620_CNFGBBC_CURRENT_SHIFT		1
-#define MAX77620_CNFGBBC_VOLTAGE_MASK		0x18
-#define MAX77620_CNFGBBC_VOLTAGE_SHIFT		3
-#define MAX77620_CNFGBBC_LOW_CURRENT_DISABLE	(1 << 5)
-#define MAX77620_CNFGBBC_RESISTOR_MASK		0xC0
-#define MAX77620_CNFGBBC_RESISTOR_SHIFT		6
-
-#define MAX77620_FPS_COUNT			3
+#define MAX77620_IRQ_LVL2_GPIO_EDGE0          (1 << 0)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE1          (1 << 1)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE2          (1 << 2)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE3          (1 << 3)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE4          (1 << 4)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE5          (1 << 5)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE6          (1 << 6)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE7          (1 << 7)
 
 /* Interrupts */
 enum {

bootloader/power/max7762x.c

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -27,12 +28,15 @@ typedef struct _max77620_regulator_t
 	u8 type;
 	const char *name;
 	u8 reg_sd;
+
 	u32 mv_step;
 	u32 mv_min;
 	u32 mv_default;
 	u32 mv_max;
+
 	u8 volt_addr;
 	u8 cfg_addr;
+
 	u8 volt_mask;
 	u8 enable_mask;
 	u8 enable_shift;
@@ -45,19 +49,19 @@ typedef struct _max77620_regulator_t
 } max77620_regulator_t;
 
 static const max77620_regulator_t _pmic_regulators[] = {
-	{  REGULATOR_SD,  "sd0", 0x16, 12500, 600000,  625000, 1400000,      MAX77620_REG_SD0,   MAX77620_REG_SD0_CFG, 0x3F, 0x30, 4, 0x80, 0x4F, 1, 7, 1 },
-	{  REGULATOR_SD,  "sd1", 0x17, 12500, 600000, 1125000, 1125000,      MAX77620_REG_SD1,   MAX77620_REG_SD1_CFG, 0x3F, 0x30, 4, 0x40, 0x50, 0, 1, 5 },
-	{  REGULATOR_SD,  "sd2", 0x18, 12500, 600000, 1325000, 1350000,      MAX77620_REG_SD2,   MAX77620_REG_SD2_CFG, 0xFF, 0x30, 4, 0x20, 0x51, 1, 5, 2 },
-	{  REGULATOR_SD,  "sd3", 0x19, 12500, 600000, 1800000, 1800000,      MAX77620_REG_SD3,   MAX77620_REG_SD3_CFG, 0xFF, 0x30, 4, 0x10, 0x52, 0, 3, 3 },
-	{ REGULATOR_LDO, "ldo0", 0x00, 25000, 800000, 1200000, 1200000, MAX77620_REG_LDO0_CFG, MAX77620_REG_LDO0_CFG2, 0x3F, 0xC0, 6, 0x00, 0x46, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo1", 0x00, 25000, 800000, 1050000, 1050000, MAX77620_REG_LDO1_CFG, MAX77620_REG_LDO1_CFG2, 0x3F, 0xC0, 6, 0x00, 0x47, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo2", 0x00, 50000, 800000, 1800000, 3300000, MAX77620_REG_LDO2_CFG, MAX77620_REG_LDO2_CFG2, 0x3F, 0xC0, 6, 0x00, 0x48, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo3", 0x00, 50000, 800000, 3100000, 3100000, MAX77620_REG_LDO3_CFG, MAX77620_REG_LDO3_CFG2, 0x3F, 0xC0, 6, 0x00, 0x49, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo4", 0x00, 12500, 800000,  850000,  850000, MAX77620_REG_LDO4_CFG, MAX77620_REG_LDO4_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4A, 0, 7, 1 },
-	{ REGULATOR_LDO, "ldo5", 0x00, 50000, 800000, 1800000, 1800000, MAX77620_REG_LDO5_CFG, MAX77620_REG_LDO5_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4B, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo6", 0x00, 50000, 800000, 2900000, 2900000, MAX77620_REG_LDO6_CFG, MAX77620_REG_LDO6_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4C, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo7", 0x00, 50000, 800000, 1050000, 1050000, MAX77620_REG_LDO7_CFG, MAX77620_REG_LDO7_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4D, 1, 4, 3 },
-	{ REGULATOR_LDO, "ldo8", 0x00, 50000, 800000, 1050000, 1050000, MAX77620_REG_LDO8_CFG, MAX77620_REG_LDO8_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4E, 3, 7, 0 }
+	{  REGULATOR_SD,  "sd0", 0x16,  12500, 600000,  625000, 1400000,      MAX77620_REG_SD0,   MAX77620_REG_SD0_CFG, MAX77620_SD0_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x80,  MAX77620_REG_FPS_SD0,  1, 7, 1 },
+	{  REGULATOR_SD,  "sd1", 0x17,  12500, 600000, 1125000, 1125000,      MAX77620_REG_SD1,   MAX77620_REG_SD1_CFG, MAX77620_SD1_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x40,  MAX77620_REG_FPS_SD1,  0, 1, 5 },
+	{  REGULATOR_SD,  "sd2", 0x18,  12500, 600000, 1325000, 1350000,      MAX77620_REG_SD2,   MAX77620_REG_SD2_CFG, MAX77620_SDX_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x20,  MAX77620_REG_FPS_SD2,  1, 5, 2 },
+	{  REGULATOR_SD,  "sd3", 0x19,  12500, 600000, 1800000, 1800000,      MAX77620_REG_SD3,   MAX77620_REG_SD3_CFG, MAX77620_SDX_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x10,  MAX77620_REG_FPS_SD3,  0, 3, 3 },
+	{ REGULATOR_LDO, "ldo0", 0x00,  25000, 800000, 1200000, 1200000, MAX77620_REG_LDO0_CFG, MAX77620_REG_LDO0_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO0, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo1", 0x00,  25000, 800000, 1050000, 1050000, MAX77620_REG_LDO1_CFG, MAX77620_REG_LDO1_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO1, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo2", 0x00,  50000, 800000, 1800000, 3300000, MAX77620_REG_LDO2_CFG, MAX77620_REG_LDO2_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO2, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo3", 0x00,  50000, 800000, 3100000, 3100000, MAX77620_REG_LDO3_CFG, MAX77620_REG_LDO3_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO3, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo4", 0x00,  12500, 800000,  850000,  850000, MAX77620_REG_LDO4_CFG, MAX77620_REG_LDO4_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO4, 0, 7, 1 },
+	{ REGULATOR_LDO, "ldo5", 0x00,  50000, 800000, 1800000, 1800000, MAX77620_REG_LDO5_CFG, MAX77620_REG_LDO5_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO5, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo6", 0x00,  50000, 800000, 2900000, 2900000, MAX77620_REG_LDO6_CFG, MAX77620_REG_LDO6_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO6, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo7", 0x00,  50000, 800000, 1050000, 1050000, MAX77620_REG_LDO7_CFG, MAX77620_REG_LDO7_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO7, 1, 4, 3 },
+	{ REGULATOR_LDO, "ldo8", 0x00,  50000, 800000, 1050000, 1050000, MAX77620_REG_LDO8_CFG, MAX77620_REG_LDO8_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO8, 3, 7, 0 }
 };
 
 int max77620_regulator_get_status(u32 id)
@@ -79,7 +83,8 @@ int max77620_regulator_config_fps(u32 id)
 
 	const max77620_regulator_t *reg = &_pmic_regulators[id];
 
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->fps_addr, (reg->fps_src << 6) | (reg->pu_period << 3) | (reg->pd_period));
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->fps_addr,
+		(reg->fps_src << MAX77620_FPS_SRC_SHIFT) | (reg->pu_period << MAX77620_FPS_PU_PERIOD_SHIFT) | (reg->pd_period));
 
 	return 1;
 }
@@ -91,7 +96,7 @@ int max77620_regulator_set_voltage(u32 id, u32 mv)
 
 	const max77620_regulator_t *reg = &_pmic_regulators[id];
 
-	if (mv < reg->mv_default || mv > reg->mv_max)
+	if (mv < reg->mv_min || mv > reg->mv_max)
 		return 0;
 
 	u32 mult = (mv + reg->mv_step - 1 - reg->mv_min) / reg->mv_step;
@@ -113,7 +118,7 @@ int max77620_regulator_enable(u32 id, int enable)
 	u32 addr = reg->type == REGULATOR_SD ? reg->cfg_addr : reg->volt_addr;
 	u8 val = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, addr);
 	if (enable)
-		val = (val & ~reg->enable_mask) | ((3 << reg->enable_shift) & reg->enable_mask);
+		val = (val & ~reg->enable_mask) | ((MAX77620_POWER_MODE_NORMAL << reg->enable_shift) & reg->enable_mask);
 	else
 		val &= ~reg->enable_mask;
 	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, addr, val);
@@ -122,6 +127,24 @@ int max77620_regulator_enable(u32 id, int enable)
 	return 1;
 }
 
+int max77620_regulator_set_volt_and_flags(u32 id, u32 mv, u8 flags)
+{
+	if (id > REGULATOR_MAX)
+		return 0;
+
+	const max77620_regulator_t *reg = &_pmic_regulators[id];
+
+	if (mv < reg->mv_min || mv > reg->mv_max)
+		return 0;
+
+	u32 mult = (mv + reg->mv_step - 1 - reg->mv_min) / reg->mv_step;
+	u8 val = ((flags << reg->enable_shift) & ~reg->volt_mask) | (mult & reg->volt_mask);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->volt_addr, val);
+	usleep(1000);
+
+	return 1;
+}
+
 void max77620_config_default()
 {
 	for (u32 i = 1; i <= REGULATOR_MAX; i++)

bootloader/power/max7762x.h

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -30,10 +31,10 @@
 *  ldo0 | Display Panel | 25000   | 800000 | 1200000    | 1200000 | 1.2V   (pkg1.1)
 *  ldo1 | XUSB, PCIE    | 25000   | 800000 | 1050000    | 1050000 | 1.05V  (pcv)
 *  ldo2 | SDMMC1        | 50000   | 800000 | 1800000    | 3300000 |
-*  ldo3 |               | 50000   | 800000 | 3100000    | 3100000 |
+*  ldo3 | GC ASIC       | 50000   | 800000 | 3100000    | 3100000 | 3.1V  (pcv)
 *  ldo4 | RTC           | 12500   | 800000 |  850000    |  850000 |
-*  ldo5 |               | 50000   | 800000 | 1800000    | 1800000 |
-*  ldo6 |               | 50000   | 800000 | 2900000    | 2900000 |
+*  ldo5 | GC ASIC       | 50000   | 800000 | 1800000    | 1800000 | 1.8V  (pcv)
+*  ldo6 | Touch, ALS    | 50000   | 800000 | 2900000    | 2900000 | 2.9V
 *  ldo7 | XUSB          | 50000   | 800000 | 1050000    | 1050000 |
 *  ldo8 | XUSB, DC      | 50000   | 800000 | 1050000    | 1050000 |
 */
@@ -108,6 +109,7 @@ int max77620_regulator_get_status(u32 id);
 int max77620_regulator_config_fps(u32 id);
 int max77620_regulator_set_voltage(u32 id, u32 mv);
 int max77620_regulator_enable(u32 id, int enable);
+int max77620_regulator_set_volt_and_flags(u32 id, u32 mv, u8 flags);
 void max77620_config_default();
 void max77620_low_battery_monitor_config();
 

bootloader/sec/se.c

@@ -270,15 +270,15 @@ int se_calc_sha256(void *dst, const void *src, u32 src_size)
 	int res;
 	// Setup config for SHA256, size = BITS(src_size).
 	SE(SE_CONFIG_REG_OFFSET) = SE_CONFIG_ENC_MODE(MODE_SHA256) | SE_CONFIG_ENC_ALG(ALG_SHA) | SE_CONFIG_DST(DST_HASHREG);
-	SE(SE_SHA_CONFIG_REG_OFFSET) = 1;
+	SE(SE_SHA_CONFIG_REG_OFFSET) = SHA_ENABLE;
 	SE(SE_SHA_MSG_LENGTH_REG_OFFSET) = (u32)(src_size << 3);
-	SE(0x208) = 0;
-	SE(0x20C) = 0;
-	SE(0x210) = 0;
+	SE(SE_SHA_MSG_LENGTH_REG_OFFSET + 4 * 1) = 0;
+	SE(SE_SHA_MSG_LENGTH_REG_OFFSET + 4 * 2) = 0;
+	SE(SE_SHA_MSG_LENGTH_REG_OFFSET + 4 * 3) = 0;
 	SE(SE_SHA_MSG_LEFT_REG_OFFSET) = (u32)(src_size << 3);
-	SE(0x218) = 0;
-   	SE(0x21C) = 0;
-	SE(0x220) = 0;
+	SE(SE_SHA_MSG_LEFT_REG_OFFSET + 4 * 1) = 0;
+	SE(SE_SHA_MSG_LEFT_REG_OFFSET + 4 * 2) = 0;
+	SE(SE_SHA_MSG_LEFT_REG_OFFSET + 4 * 3) = 0;
 
 	// Trigger the operation.
 	res = _se_execute(OP_START, NULL, 0, src, src_size);

bootloader/sec/tsec.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  * Copyright (c) 2018 balika011
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -29,8 +29,7 @@
 #include "../utils/util.h"
 #include "../hos/hos.h"
 
-/* #include "../gfx/gfx.h"
-extern gfx_con_t gfx_con; */
+// #include "../gfx/gfx.h"
 
 static int _tsec_dma_wait_idle()
 {
@@ -97,15 +96,15 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 	}
 
 	//Load firmware or emulate memio environment for newer TSEC fw.
-	if (kb <= KB_FIRMWARE_VERSION_600)
+	if (kb == KB_FIRMWARE_VERSION_620)
+		TSEC(TSEC_DMATRFBASE) = (u32)tsec_ctxt->fw >> 8;
+	else
 	{
-		fwbuf = (u8 *)malloc(0x2000);
-		u8 *fwbuf_aligned = (u8 *)ALIGN((u32)fwbuf + 0x1000, 0x100);
+		fwbuf = (u8 *)malloc(0x4000);
+		u8 *fwbuf_aligned = (u8 *)ALIGN((u32)fwbuf, 0x100);
 		memcpy(fwbuf_aligned, tsec_ctxt->fw, tsec_ctxt->size);
 		TSEC(TSEC_DMATRFBASE) = (u32)fwbuf_aligned >> 8;
 	}
-	else
-		TSEC(TSEC_DMATRFBASE) = (u32)tsec_ctxt->fw >> 8;
 
 	for (u32 addr = 0; addr < tsec_ctxt->size; addr += 0x100)
 	{
@@ -116,7 +115,7 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 		}
 	}
 
-	if (kb >= KB_FIRMWARE_VERSION_620)
+	if (kb == KB_FIRMWARE_VERSION_620)
 	{
 		// Init SMMU translation for TSEC.
 		pdir = smmu_init_for_tsec();
@@ -174,45 +173,11 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 	//Execute firmware.
 	HOST1X(0x3300) = 0x34C2E1DA;
 	TSEC(TSEC_STATUS) = 0;
-	TSEC(TSEC_BOOTKEYVER) = tsec_ctxt->key_ver;
+	TSEC(TSEC_BOOTKEYVER) = 1; // HOS uses key version 1.
 	TSEC(TSEC_BOOTVEC) = 0;
 	TSEC(TSEC_CPUCTL) = TSEC_CPUCTL_STARTCPU;
 
-	if (kb <= KB_FIRMWARE_VERSION_600)
-	{
-		if (!_tsec_dma_wait_idle())
-		{
-			res = -3;
-			goto out_free;
-		}
-		u32 timeout = get_tmr_ms() + 2000;
-		while (!TSEC(TSEC_STATUS))
-			if (get_tmr_ms() > timeout)
-			{
-				res = -4;
-				goto out_free;
-			}
-		if (TSEC(TSEC_STATUS) != 0xB0B0B0B0)
-		{
-			res = -5;
-			goto out_free;
-		}
-
-		//Fetch result.
-		HOST1X(0x3300) = 0;
-		u32 buf[4];
-		buf[0] = SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB);
-		buf[1] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB);
-		buf[2] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB);
-		buf[3] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB);
-		SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB) = 0;
-		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB) = 0;
-		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB) = 0;
-		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB) = 0;
-
-		memcpy(tsec_keys, &buf, 0x10);
-	}
-	else
+	if (kb == KB_FIRMWARE_VERSION_620)
 	{
 		u32 start = get_tmr_us();
 		u32 k = se[SE_KEYTABLE_DATA0_REG_OFFSET / 4];
@@ -261,6 +226,40 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 		// gfx_printf(&gfx_con, " dir:  %s\n", (errst >> 16) & 1 ? "W" : "R");
 		// gfx_printf(&gfx_con, " cid:  %02x\n", errst & 0xFF);
 	}
+	else
+	{
+		if (!_tsec_dma_wait_idle())
+		{
+			res = -3;
+			goto out_free;
+		}
+		u32 timeout = get_tmr_ms() + 2000;
+		while (!TSEC(TSEC_STATUS))
+			if (get_tmr_ms() > timeout)
+			{
+				res = -4;
+				goto out_free;
+			}
+		if (TSEC(TSEC_STATUS) != 0xB0B0B0B0)
+		{
+			res = -5;
+			goto out_free;
+		}
+
+		//Fetch result.
+		HOST1X(0x3300) = 0;
+		u32 buf[4];
+		buf[0] = SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB);
+		buf[1] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB);
+		buf[2] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB);
+		buf[3] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB);
+		SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB) = 0;
+		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB) = 0;
+		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB) = 0;
+		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB) = 0;
+
+		memcpy(tsec_keys, &buf, 0x10);
+	}
 
 out_free:;
 	free(fwbuf);

bootloader/sec/tsec.h

@@ -22,7 +22,6 @@
 
 typedef struct _tsec_ctxt_t
 {
-	u32 key_ver;
 	void *fw;
 	u32 size;
 	void *pkg1;

bootloader/soc/cluster.c

@@ -25,8 +25,8 @@
 
 void _cluster_enable_power()
 {
-	u8 tmp = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO, tmp & 0xDF);
+	u8 tmp = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO); // Get current pinmuxing
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO, tmp & ~(1 << 5)); // Disable GPIO5 pinmuxing.
 	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, MAX77620_CNFG_GPIO_DRV_PUSHPULL | MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH);
 
 	// Enable cores power.

bootloader/soc/hw_init.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -37,6 +37,7 @@
 #include "../utils/util.h"
 
 extern sdmmc_t sd_sdmmc;
+extern boot_cfg_t b_cfg;
 
 void _config_oscillators()
 {
@@ -97,6 +98,9 @@ void _config_pmc_scratch()
 
 void _mbist_workaround()
 {
+	CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= (1 << 10); // Enable AHUB clock.
+	CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= (1 <<  6);  // Enable APE clock.
+
 	CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) | 0x8000) & 0xFFFFBFFF;
 	CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) |= 0x40800000u;
 	CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_CLR) = 0x40;
@@ -142,27 +146,31 @@ void _mbist_workaround()
 
 void _config_se_brom()
 {
-	// Bootrom part we skipped.
-	u32 sbk[4] = { 
-		FUSE(FUSE_PRIVATE_KEY0),
-		FUSE(FUSE_PRIVATE_KEY1),
-		FUSE(FUSE_PRIVATE_KEY2),
-		FUSE(FUSE_PRIVATE_KEY3)
-	};
-	// Set SBK to slot 14.
-	se_aes_key_set(14, sbk, 0x10);
+	// Skip SBK/SSK if sept was run.
+	if (!(b_cfg.boot_cfg & BOOT_CFG_SEPT_RUN))
+	{
+		// Bootrom part we skipped.
+		u32 sbk[4] = { 
+			FUSE(FUSE_PRIVATE_KEY0),
+			FUSE(FUSE_PRIVATE_KEY1),
+			FUSE(FUSE_PRIVATE_KEY2),
+			FUSE(FUSE_PRIVATE_KEY3)
+		};
+		// Set SBK to slot 14.
+		se_aes_key_set(14, sbk, 0x10);
 
-	// Lock SBK from being read.
-	SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 14 * 4) = 0x7E;
+		// Lock SBK from being read.
+		SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 14 * 4) = 0x7E;
+
+		// Lock SSK (although it's not set and unused anyways).
+		SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 15 * 4) = 0x7E;
+	}
 
 	// This memset needs to happen here, else TZRAM will behave weirdly later on.
 	memset((void *)TZRAM_BASE, 0, 0x10000);
-	PMC(APBDEV_PMC_CRYPTO_OP) = 0;
+	PMC(APBDEV_PMC_CRYPTO_OP) = PMC_CRYPTO_OP_SE_ENABLE;
 	SE(SE_INT_STATUS_REG_OFFSET) = 0x1F;
 
-	// Lock SSK (although it's not set and unused anyways).
-	SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 15 * 4) = 0x7E;
-
 	// Clear the boot reason to avoid problems later
 	PMC(APBDEV_PMC_SCRATCH200) = 0x0;
 	PMC(APBDEV_PMC_RST_STATUS) = 0x0;
@@ -206,21 +214,30 @@ void config_hw()
 	i2c_init(I2C_1);
 	i2c_init(I2C_5);
 
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, 0x40);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1, 0x78); // PWR delay for forced shutdown off.
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, MAX77620_CNFGBBC_RESISTOR_1K);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1,
+		(1 << 6) | (3 << MAX77620_ONOFFCNFG1_MRT_SHIFT)); // PWR delay for forced shutdown off.
 
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0, 0x38);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1, 0x3A);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG2, 0x38);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO4, 0xF);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO8, 0xC7);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD0, 0x4F);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD1, 0x29);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD3, 0x1B);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0,
+		(7 << MAX77620_FPS_TIME_PERIOD_SHIFT));
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1,
+		(7 << MAX77620_FPS_TIME_PERIOD_SHIFT) | (1 << MAX77620_FPS_EN_SRC_SHIFT));
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG2,
+		(7 << MAX77620_FPS_TIME_PERIOD_SHIFT));
+	max77620_regulator_config_fps(REGULATOR_LDO4);
+	max77620_regulator_config_fps(REGULATOR_LDO8);
+	max77620_regulator_config_fps(REGULATOR_SD0);
+	max77620_regulator_config_fps(REGULATOR_SD1);
+	max77620_regulator_config_fps(REGULATOR_SD3);
 
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_GPIO3, 0x22); // 3.x+
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_GPIO3,
+		(4 << MAX77620_FPS_TIME_PERIOD_SHIFT) | (2 << MAX77620_FPS_PD_PERIOD_SHIFT)); // 3.x+
 
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD0, 42); //42 = (1125000uV - 600000) / 12500 -> 1.125V
+	max77620_regulator_set_voltage(REGULATOR_SD0, 1125000);
+
+	// Fix GPU after warmboot for Linux.
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, 2);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO6, 2);
 
 	_config_pmc_scratch(); // Missing from 4.x+
 
@@ -247,10 +264,6 @@ void reconfig_hw_workaround(bool extra_reconfig, u32 magic)
 		gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);
 		gpio_config(GPIO_PORT_E, GPIO_PIN_6, GPIO_MODE_SPIO);
 		gpio_config(GPIO_PORT_H, GPIO_PIN_6, GPIO_MODE_SPIO);
-
-		// Fix GPU after warmboot for Linux.
-		i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, 2);
-		i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO6, 2);
 	}
 
 	// Power off display.

bootloader/soc/pmc.h

@@ -32,12 +32,18 @@
 #define  PMC_PWR_DET_SDMMC1_IO_EN (1 << 12)
 #define APBDEV_PMC_DDR_PWR 0xE8
 #define APBDEV_PMC_CRYPTO_OP 0xF4
+#define  PMC_CRYPTO_OP_SE_ENABLE  0
+#define  PMC_CRYPTO_OP_SE_DISABLE 1
+#define APBDEV_PMC_SCRATCH33 0x120
+#define APBDEV_PMC_SCRATCH40 0x13C
 #define APBDEV_PMC_OSC_EDPD_OVER 0x1A4
 #define APBDEV_PMC_RST_STATUS 0x1B4
 #define APBDEV_PMC_IO_DPD_REQ 0x1B8
 #define APBDEV_PMC_IO_DPD2_REQ 0x1C0
 #define APBDEV_PMC_VDDP_SEL 0x1CC
 #define APBDEV_PMC_DDR_CFG 0x1D0
+#define APBDEV_PMC_SCRATCH45 0x234
+#define APBDEV_PMC_SCRATCH46 0x238
 #define APBDEV_PMC_SCRATCH49 0x244
 #define APBDEV_PMC_TSC_MULT 0x2B4
 #define APBDEV_PMC_SEC_DISABLE2 0x2C4

bootloader/soc/t210.h

@@ -179,4 +179,9 @@
 #define  I2S_CG_SLCG_ENABLE (1 << 0)
 #define  I2S_CTRL_MASTER_EN (1 << 10)
 
+/*! Special registers. */
+#define EMC_SCRATCH0 0x324
+#define  EMC_HEKA_UPD (1 << 30)
+#define  EMC_SEPT_RUN (1 << 31)
+
 #endif

bootloader/storage/sdmmc.c

@@ -19,13 +19,11 @@
 #include "sdmmc.h"
 #include "mmc.h"
 #include "sd.h"
-#include "../utils/util.h"
+#include "../gfx/gfx.h"
 #include "../mem/heap.h"
+#include "../utils/util.h"
 
-/*#include "gfx.h"
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
-#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)*/
+//#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)
 #define DPRINTF(...)
 
 static inline u32 unstuff_bits(u32 *resp, u32 start, u32 size)

bootloader/storage/sdmmc_driver.c

@@ -17,20 +17,18 @@
 
 #include <string.h>
 
-#include "sdmmc.h"
-#include "../utils/util.h"
-#include "../soc/clock.h"
 #include "mmc.h"
+#include "sdmmc.h"
+#include "../gfx/gfx.h"
 #include "../power/max7762x.h"
-#include "../soc/t210.h"
-#include "../soc/pmc.h"
-#include "../soc/pinmux.h"
+#include "../soc/clock.h"
 #include "../soc/gpio.h"
+#include "../soc/pinmux.h"
+#include "../soc/pmc.h"
+#include "../soc/t210.h"
+#include "../utils/util.h"
 
-/*#include "gfx.h"
-extern gfx_ctxt_t gfx_ctxt;
-extern gfx_con_t gfx_con;
-#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)*/
+//#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)
 #define DPRINTF(...)
 
 /*! SCMMC controller base addresses. */

bootloader/utils/btn.c

@@ -22,9 +22,9 @@
 #include "util.h"
 #include "../power/max77620.h"
 
-u32 btn_read()
+u8 btn_read()
 {
-	u32 res = 0;
+	u8 res = 0;
 	if (!gpio_read(GPIO_PORT_X, GPIO_PIN_7))
 		res |= BTN_VOL_DOWN;
 	if (!gpio_read(GPIO_PORT_X, GPIO_PIN_6))
@@ -34,9 +34,9 @@ u32 btn_read()
 	return res;
 }
 
-u32 btn_wait()
+u8 btn_wait()
 {
-	u32 res = 0, btn = btn_read();
+	u8 res = 0, btn = btn_read();
 	bool pwr = false;
 
 	//Power button down, raise a filter.
@@ -59,16 +59,18 @@ u32 btn_wait()
 	return res;
 }
 
-u32 btn_wait_timeout(u32 time_ms, u32 mask)
+u8 btn_wait_timeout(u32 time_ms, u8 mask)
 {
 	u32 timeout = get_tmr_ms() + time_ms;
-	u32 res = btn_read() & mask;
+	u8 res = btn_read() & mask;
 
-	do
+	while (get_tmr_ms() < timeout)
 	{
-		if (!(res & mask))
+		if (res == mask)
+			break;
+		else
 			res = btn_read() & mask;
-	} while (get_tmr_ms() < timeout);
+	};
 
 	return res;
 }

bootloader/utils/btn.h

@@ -20,12 +20,12 @@
 
 #include "types.h"
 
-#define BTN_POWER 0x1
-#define BTN_VOL_DOWN 0x2
-#define BTN_VOL_UP 0x4
+#define BTN_POWER    (1 << 0)
+#define BTN_VOL_DOWN (1 << 1)
+#define BTN_VOL_UP   (1 << 2)
 
-u32 btn_read();
-u32 btn_wait();
-u32 btn_wait_timeout(u32 time_ms, u32 mask);
+u8 btn_read();
+u8 btn_wait();
+u8 btn_wait_timeout(u32 time_ms, u8 mask);
 
 #endif

bootloader/utils/types.h

@@ -51,4 +51,37 @@ typedef int bool;
 #define true  1
 #define false 0
 
+#define BOOT_CFG_AUTOBOOT_EN (1 << 0)
+#define BOOT_CFG_FROM_LAUNCH (1 << 1)
+#define BOOT_CFG_SEPT_RUN    (1 << 7)
+
+#define EXTRA_CFG_KEYS    (1 << 0)
+#define EXTRA_CFG_PAYLOAD (1 << 1)
+#define EXTRA_CFG_MODULE  (1 << 2)
+
+typedef struct __attribute__((__packed__)) _boot_cfg_t
+{
+	u8  boot_cfg;
+	u8  autoboot;
+	u8  autoboot_list;
+	u8  extra_cfg;
+	u8  rsvd[128];
+} boot_cfg_t;
+
+typedef struct __attribute__((__packed__)) _ipl_ver_meta_t
+{
+	u32 magic;
+	u32 version;
+	u16 rsvd0;
+	u16 rsvd1;
+} ipl_ver_meta_t;
+
+typedef struct __attribute__((__packed__)) _reloc_meta_t
+{
+	u32 start;
+	u32 stack;
+	u32 end;
+	u32 ep;
+} reloc_meta_t;
+
 #endif

bootloader/utils/util.c

@@ -16,8 +16,15 @@
 */
 
 #include "util.h"
+#include "../gfx/di.h"
+#include "../power/max77620.h"
+#include "../rtc/max77620-rtc.h"
+#include "../soc/i2c.h"
+#include "../soc/pmc.h"
 #include "../soc/t210.h"
 
+extern void sd_unmount();
+
 u32 get_tmr_s()
 {
 	return RTC(APBDEV_RTC_SECONDS);
@@ -26,7 +33,7 @@ u32 get_tmr_s()
 u32 get_tmr_ms()
 {
 	// The registers must be read with the following order:
-	// -> RTC_MILLI_SECONDS (0x10) -> RTC_SHADOW_SECONDS (0xC)
+	// RTC_MILLI_SECONDS (0x10) -> RTC_SHADOW_SECONDS (0xC)
 	return (RTC(APBDEV_RTC_MILLI_SECONDS) | (RTC(APBDEV_RTC_SHADOW_SECONDS) << 10));
 }
 
@@ -56,6 +63,50 @@ void exec_cfg(u32 *base, const cfg_op_t *ops, u32 num_ops)
 		base[ops[i].off] = ops[i].val;
 }
 
+void panic(u32 val)
+{
+	// Set panic code.
+	PMC(APBDEV_PMC_SCRATCH200) = val;
+	//PMC(APBDEV_PMC_CRYPTO_OP) = PMC_CRYPTO_OP_SE_DISABLE;
+	TMR(TIMER_WDT4_UNLOCK_PATTERN) = TIMER_MAGIC_PTRN;
+	TMR(TIMER_TMR9_TMR_PTV) = TIMER_EN | TIMER_PER_EN;
+	TMR(TIMER_WDT4_CONFIG)  = TIMER_SRC(9) | TIMER_PER(1) | TIMER_PMCRESET_EN;
+	TMR(TIMER_WDT4_COMMAND) = TIMER_START_CNT;
+	while (1)
+		;
+}
+
+void reboot_normal()
+{
+	sd_unmount();
+	display_end();
+
+	panic(0x21); // Bypass fuse programming in package1.
+}
+
+void reboot_rcm()
+{
+	sd_unmount();
+	display_end();
+
+	PMC(APBDEV_PMC_SCRATCH0) = 2; // Reboot into rcm.
+	PMC(APBDEV_PMC_CNTRL) |= PMC_CNTRL_MAIN_RST;
+
+	while (true)
+		usleep(1);
+}
+
+void power_off()
+{
+	sd_unmount();
+
+	// Stop the alarm, in case we injected and powered off too fast.
+	max77620_rtc_stop_alarm();
+
+	//TODO: we should probably make sure all regulators are powered off properly.
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1, MAX77620_ONOFFCNFG1_PWR_OFF);
+}
+
 #define CRC32C_POLY 0x82F63B78
 u32 crc32c(const void *buf, u32 len)
 {
@@ -69,31 +120,3 @@ u32 crc32c(const void *buf, u32 len)
 	}
 	return ~crc;
 }
-
-u32 memcmp32sparse(const u32 *buf1, const u32 *buf2, u32 len)
-{
-	u32 len32 = len / 4;
-
-	if (!(len32 % 32))
-	{
-		while (len32)
-		{
-			len32 -= 32;
-			if(buf1[len32] != buf2[len32])
-				return 1;
-		}
-	}
-	else
-	{
-		while (len32)
-		{
-			len32 -= 32;
-			if(buf1[len32] != buf2[len32])
-				return 1;
-			if (len32 < 32)
-				return 0;
-		}
-	}
-
-	return 0;
-}

bootloader/utils/util.h

@@ -20,8 +20,8 @@
 
 #include "types.h"
 
-#define byte_swap_32(num) ((num >> 24) & 0xff) | ((num << 8) & 0xff0000) | \
-						((num >> 8 )& 0xff00) | ((num << 24) & 0xff000000)
+#define byte_swap_32(num) (((num >> 24) & 0xff) | ((num << 8) & 0xff0000) | \
+						((num >> 8 )& 0xff00) | ((num << 24) & 0xff000000))
 
 typedef struct _cfg_op_t
 {
@@ -34,11 +34,11 @@ u32 get_tmr_ms();
 u32 get_tmr_s();
 void usleep(u32 ticks);
 void msleep(u32 milliseconds);
+void panic(u32 val);
+void reboot_normal();
+void reboot_rcm();
+void power_off();
 void exec_cfg(u32 *base, const cfg_op_t *ops, u32 num_ops);
 u32 crc32c(const void *buf, u32 len);
 
-/* This is a faster implementation of memcmp that checks two u32 values */
-/* every 128 Bytes block. Intented only for Backup and Restore          */
-u32 memcmp32sparse(const u32 *buf1, const u32 *buf2, u32 len);
-
 #endif

res/hekate_ipl_template.ini

@@ -1,46 +1,59 @@
 [config]
-autoboot=5
+autoboot=4
+autoboot_list=0
 bootwait=3
-customlogo=1
-verification=2
+verification=1
+backlight=100
+autohosoff=0
+autonogc=1
 
 {-------- Stock -------}
-[Stock]
+[Stock 6.2.0 and lower]
+stock=1
 
-[Stock (SVC perms)]
-fullsvcperm=1
-debugmode=1
-
-[Stock (Prevent GC access)]
-kip1patch=nogc
-
-[Stock (Allow unsigned NCA)]
-kip1patch=nosigchk
+[Stock All FW]
+fss0=atmosphere/fusee-secondary.bin
+stock=1
 { }
+# Both above disable kernel patching
+# Stock All FW, includes exosphere and warmboot, ONLY when >= 7.0.0.
 
 {-- Custom Firmwares --}
-[AtmoHB]
-kip1=cfw/loader.kip1
-kip1=cfw/sm.kip1
+[Atmo FSS0 Vanilla]
+fss0=atmosphere/fusee-secondary.bin
+logopath=cfw/atmo.bmp
 
-[AtmoHB (SVC Perms)]
-kip1=cfw/loader.kip1
-kip1=cfw/sm.kip1
-fullsvcperm=1
+[CFW FSS0 extra kips]
+fss0=atmosphere/fusee-secondary.bin
+kip1=cfw/mods/mods_extra/*
+kip1=cfw/mods/mods_extra/single/extra.kip
+logopath=cfw/cfw.bmp
+# Both options for kip1 can be used. Wildcard and single.
 
-[Atmosphere Full]
-secmon=cfw/atmo/exosphere.bin
-kip1=cfw/atmo/loader.kip
-kip1=cfw/atmo/sm.kip
-kip1=cfw/atmo/fs_mitm.kip
-logopath=cfw/atmo/atmo.bmp
+[Atmo Vanilla]
+secmon=cfw/mods/exosphere.bin
+warmboot=cfw/mods/lp0fw.bin
+kip1=cfw/mods/loader.kip
+kip1=cfw/mods/sm.kip
+kip1=cfw/mods/pm.kip
+kip1=cfw/mods/ams_mitm.kip
+logopath=cfw/atmo.bmp
 atmosphere=1
-# kip1=cfw/atmo/pm.kip
+# All kips defined.
+
+[CFW Extra kips]
+secmon=cfw/mods/exosphere.bin
+warmboot=cfw/mods/lp0fw.bin
+kip1=cfw/mods/*
+kip1=cfw/mods/extra/extra.kip
+logopath=cfw/cfw.bmp
+atmosphere=1
+# All kips parsed from a directory and extra added.
 { }
 
 {------- Tools -------}
-[Clear Error Logs]
-kip1=cfw/nx-dreport.kip
+[memloader]
+payload=bootloader/payloads/memloader.bin
 
 
-# hekate - CTCaer mod v3.0 .ini template
+# hekate - CTCaer mod v4.9.1 .ini template