Bump version to v4.8

[sept] Auto update sept payload via update.bin
This will check if payload.bin is the same version with update.bin
2019-02-24 03:09:07 +02:00 · 2019-02-24 03:04:28 +02:00 · 2019-02-24 03:03:17 +02:00 · 2019-02-24 02:58:15 +02:00 · 2019-02-24 02:54:32 +02:00 · 2019-02-24 02:43:13 +02:00
45 changed files with 1724 additions and 948 deletions
--- a/13
+++ b/13
@@ -4,9 +4,11 @@ endif

 include $(DEVKITARM)/base_rules

-TARGET := hekate
+IPL_LOAD_ADDR := 0x40008000
 BLVERSION_MAJOR := 4
-BLVERSION_MINOR := 6
+BLVERSION_MINOR := 8
+
+TARGET := hekate
 BUILD := build
 OUTPUT := output
 SOURCEDIR = bootloader
@@ -28,6 +30,7 @@ OBJS = $(addprefix $(BUILD)/$(TARGET)/, \
 	hos.o \
 	hos_config.o \
 	secmon_exo.o \
+	sept.o \
 	i2c.o \
 	kfuse.o \
 	bq24193.o \
@@ -53,6 +56,7 @@ OBJS = $(addprefix $(BUILD)/$(TARGET)/, \
 	ini.o \
 	ianos.o \
 	smmu.o \
+	max77620-rtc.o \
 )

 OBJS += $(addprefix $(BUILD)/$(TARGET)/, \
@@ -61,14 +65,15 @@ OBJS += $(addprefix $(BUILD)/$(TARGET)/, \
 	elfload.o elfreloc_arm.o \
 )

-CUSTOMDEFINES := -DBLVERSIONMJ=$(BLVERSION_MAJOR) -DBLVERSIONMN=$(BLVERSION_MINOR) -DMENU_LOGO_ENABLE
+CUSTOMDEFINES := -DBLVERSIONMJ=$(BLVERSION_MAJOR) -DBLVERSIONMN=$(BLVERSION_MINOR) -DIPL_LOAD_ADDR=$(IPL_LOAD_ADDR)
+CUSTOMDEFINES += -DMENU_LOGO_ENABLE
 #CUSTOMDEFINES += -DDEBUG
 # 0: UART_A, 1: UART_B.
 #CUSTOMDEFINES += -DDEBUG_UART_PORT=0

 ARCH := -march=armv4t -mtune=arm7tdmi -mthumb -mthumb-interwork
 CFLAGS = $(ARCH) -O2 -nostdlib -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-inline -std=gnu11 -Wall $(CUSTOMDEFINES)
-LDFLAGS = $(ARCH) -nostartfiles -lgcc -Wl,--nmagic,--gc-sections
+LDFLAGS = $(ARCH) -nostartfiles -lgcc -Wl,--nmagic,--gc-sections -Xlinker --defsym=IPL_LOAD_ADDR=$(IPL_LOAD_ADDR)

 MODULEDIRS := $(wildcard modules/*)

--- a/README.md
+++ b/README.md
@@ -29,15 +29,15 @@ The bootloader can be configured via 'bootloader/hekate_ipl.ini' (if it is prese
 There are four possible type of entries. "**[ ]**": Boot entry, "**{ }**": Caption, "**#**": Comment, "*newline*": .ini cosmetic newline.


-### Configuration keys/values when boot entry is **config**:
+### Global Configuration keys/values when boot entry is **config**:

 | Config option      | Description                                                |
 | ------------------ | ---------------------------------------------------------- |
 | autoboot=0         | 0: Disable, #: Boot entry number to auto boot.             |
 | bootwait=3         | 0: Disable (It also disables bootlogo. Having **VOL-** pressed since injection goes to menu.), #: Time to wait for **VOL-** to enter menu. |
-| customlogo=0       | 0: Use default hekate bootlogo, 1: Use bootlogo.bmp.       |
 | verification=2     | 0: Disable Backup/Restore verification, 1: Sparse (block based, fast and not 100% reliable), 2: Full (sha256 based, slow and 100% reliable). |
 | autohosoff=1       | 0: Disable, 1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely, 2: No logo, immediately powers off.|
+| autonogc=1         | 0: Disable, 1: Automatically applies nogc patch if unburnt fuses found and a >= 4.0.0 HOS is booted. |
 | backlight=100      | Screen backlight level. 0-255.                             |


@@ -51,13 +51,26 @@ There are four possible type of entries. "**[ ]**": Boot entry, "**{ }**": Capti
 | kernel={SD path}   | Replaces the kernel binary                                 |
 | kip1={SD path}     | Replaces/Adds kernel initial process. Multiple can be set. |
 | kip1={SD folder}/* | Loads every .kip/.kip1 inside a folder. Compatible with single kip1 keys. |
-| kip1patch=patchname| Enables a kip1 patch. Specify with multiple lines and/or as CSV. Implemented patches right now are nosigchk,nogc |
+| kip1patch=patchname| Enables a kip1 patch. Specify with multiple lines and/or as CSV. Current available patches nosigchk. |
 | fullsvcperm=1      | Disables SVC verification (full services permission)       |
 | debugmode=1        | Enables Debug mode                                         |
 | atmosphere=1       | Enables Atmosphère patching                                |
 | payload={SD path}  | Payload launching. Tools, Linux, CFW bootloaders, etc.     |


+### Payload storage:
+
+Hekate now has a new storage in the binary that helps it configure it outside of BPMP enviroment:
+
+| Offset / Name        | Description                                                       |
+| -------------------- | ----------------------------------------------------------------- |
+| '0x94' boot_cfg      | bit0: Force AutoBoot, bit1: Show launch log, bit2: sept run.      |
+| '0x98' autoboot      | If `Force AutoBoot`: 0: Force go to menu, else boot that entry.   |
+| '0x9C' autoboot_list | If `Force AutoBoot` and `autoboot` then it boots from ini folder. |
+| '0xA0' rsvd_cfg      | Reserved.                                                         |
+| '0xA4' rsvd[32]      | Reserved.                                                         |
+
+
 You can find a template [Here](./res/hekate_ipl_template.ini)

 If the main .ini is not found, it is created on the first hekate boot.
--- a/bootloader/config/config.c
+++ b/bootloader/config/config.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -17,14 +17,15 @@
 #include <string.h>
 #include <stdlib.h>

-#include "../utils/btn.h"
 #include "config.h"
-#include "../libs/fatfs/ff.h"
 #include "ini.h"
-#include "../utils/list.h"
-#include "../gfx/tui.h"
-#include "../utils/util.h"
 #include "../gfx/gfx.h"
+#include "../gfx/tui.h"
+#include "../libs/fatfs/ff.h"
+#include "../soc/t210.h"
+#include "../utils/btn.h"
+#include "../utils/list.h"
+#include "../utils/util.h"

 extern gfx_ctxt_t gfx_ctxt;
 extern gfx_con_t gfx_con;
@@ -41,13 +42,14 @@ void set_default_configuration()
 	h_cfg.autoboot = 0;
 	h_cfg.autoboot_list = 0;
 	h_cfg.bootwait = 3;
-	h_cfg.customlogo = 0;
 	h_cfg.verification = 2;
 	h_cfg.se_keygen_done = 0;
 	h_cfg.sbar_time_keeping = 0;
 	h_cfg.backlight = 100;
 	h_cfg.autohosoff = 0;
 	h_cfg.errors = 0;
+	h_cfg.autonogc = 1;
+	h_cfg.sept_run = EMC(EMC_SCRATCH0) & EMC_SEPT_RUN;
 }

 int create_config_entry()
@@ -93,9 +95,6 @@ int create_config_entry()
 	f_puts("\nbootwait=", &fp);
 	itoa(h_cfg.bootwait, lbuf, 10);
 	f_puts(lbuf, &fp);
-	f_puts("\ncustomlogo=", &fp);
-	itoa(h_cfg.customlogo, lbuf, 10);
-	f_puts(lbuf, &fp);
 	f_puts("\nverification=", &fp);
 	itoa(h_cfg.verification, lbuf, 10);
 	f_puts(lbuf, &fp);
@@ -105,6 +104,9 @@ int create_config_entry()
 	f_puts("\nautohosoff=", &fp);
 	itoa(h_cfg.autohosoff, lbuf, 10);
 	f_puts(lbuf, &fp);
+	f_puts("\nautonogc=", &fp);
+	itoa(h_cfg.autonogc, lbuf, 10);
+	f_puts(lbuf, &fp);
 	f_puts("\n", &fp);

 	if (mainIniFound)
@@ -156,6 +158,18 @@ int create_config_entry()
 	return 0;
 }

+static void _save_config()
+{
+	gfx_clear_grey(&gfx_ctxt, 0x1B);
+	gfx_con_setpos(&gfx_con, 0, 0);
+
+	if (!create_config_entry())
+		gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
+	else
+		EPRINTF("\nConfiguration saving failed!");
+	gfx_puts(&gfx_con, "\nPress any key...");
+}
+
 static void _config_autoboot_list(void *ent)
 {
 	gfx_clear_grey(&gfx_ctxt, 0x1B);
@@ -216,21 +230,13 @@ static void _config_autoboot_list(void *ent)
 			}

 			memset(&ments[i], 0, sizeof(ment_t));
-			menu_t menu = {ments, "Select a list entry to auto boot", 0, 0};
+			menu_t menu = {ments, "Select an entry to auto boot", 0, 0};
 			temp_autoboot = (u32 *)tui_do_menu(&gfx_con, &menu);
 			if (temp_autoboot != NULL)
 			{
-				gfx_clear_grey(&gfx_ctxt, 0x1B);
-				gfx_con_setpos(&gfx_con, 0, 0);
-
 				h_cfg.autoboot = *(u32 *)temp_autoboot;
 				h_cfg.autoboot_list = 1;
-				// Save choice to ini file.
-				if (!create_config_entry())
-					gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-				else
-					EPRINTF("\nConfiguration saving failed!");
-				gfx_puts(&gfx_con, "\nPress any key...");
+				_save_config();

 				ment_t *tmp = (ment_t *)ent;
 				tmp->data = NULL;
@@ -240,7 +246,7 @@ static void _config_autoboot_list(void *ent)
 		}
 		else
 		{
-			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists in SD Card!.");
+			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists!.");
 			goto out;
 		}
 	}
@@ -344,24 +350,16 @@ void config_autoboot()
 			temp_autoboot = (u32 *)tui_do_menu(&gfx_con, &menu);
 			if (temp_autoboot != NULL)
 			{
-				gfx_clear_grey(&gfx_ctxt, 0x1B);
-				gfx_con_setpos(&gfx_con, 0, 0);
-
 				h_cfg.autoboot = *(u32 *)temp_autoboot;
 				h_cfg.autoboot_list = 0;
-				// Save choice to ini file.
-				if (!create_config_entry())
-					gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-				else
-					EPRINTF("\nConfiguration saving failed!");
-				gfx_puts(&gfx_con, "\nPress any key...");
+				_save_config();
 			}
 			else
 				goto out2;
 		}
 		else
 		{
-			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists in SD Card!.");
+			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists!.");
 			goto out;
 		}
 	}
@@ -380,6 +378,9 @@ out2:;
 		return;
 }

+#pragma GCC push_options
+#pragma GCC optimize ("Os")
+
 void config_bootdelay()
 {
 	gfx_clear_grey(&gfx_ctxt, 0x1B);
@@ -427,16 +428,8 @@ void config_bootdelay()
 	u32 *temp_bootwait = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_bootwait != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.bootwait = *(u32 *)temp_bootwait;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}

 	free(ments);
@@ -448,64 +441,6 @@ void config_bootdelay()
 	btn_wait();
 }

-void config_customlogo()
-{
-	gfx_clear_grey(&gfx_ctxt, 0x1B);
-	gfx_con_setpos(&gfx_con, 0, 0);
-
-	ment_t *ments = (ment_t *)malloc(sizeof(ment_t) * 5);
-	u32 *cb_values = (u32 *)malloc(sizeof(u32) * 2);
-
-	for (u32 j = 0; j < 2; j++)
-	{
-		cb_values[j] = j;
-		ments[j + 2].type = MENT_DATA;
-		ments[j + 2].data = &cb_values[j];
-	}
-
-	ments[0].type = MENT_BACK;
-	ments[0].caption = "Back";
-
-	ments[1].type = MENT_CHGLINE;
-
-	if (h_cfg.customlogo)
-	{
-		ments[2].caption = " Disable";
-		ments[3].caption = "*Enable";
-
-	}
-	else
-	{
-		ments[2].caption = "*Disable";
-		ments[3].caption = " Enable";
-	}
-
-	memset(&ments[4], 0, sizeof(ment_t));
-	menu_t menu = {ments, "Custom bootlogo", 0, 0};
-
-	u32 *temp_customlogo = (u32 *)tui_do_menu(&gfx_con, &menu);
-	if (temp_customlogo != NULL)
-	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
-		h_cfg.customlogo = *(u32 *)temp_customlogo;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
-	}
-
-	free(ments);
-	free(cb_values);
-
-	if (temp_customlogo == NULL)
-		return;
-	btn_wait();
-}
-
 void config_verification()
 {
 	gfx_clear_grey(&gfx_ctxt, 0x1B);
@@ -528,21 +463,16 @@ void config_verification()
 	ments[1].type = MENT_CHGLINE;

 	memcpy(vr_text,       " Disable (Fastest)", 19);
-	memcpy(vr_text + 64,  " Sparse  (Fast - Not  reliable)", 32);
-	memcpy(vr_text + 128, " Full    (Slow - 100% reliable)", 32);
+	memcpy(vr_text + 64,  " Sparse  (Fast)", 16);
+	memcpy(vr_text + 128, " Full    (Slow)", 16);

 	for (u32 i = 0; i < 3; i++)
 	{
 		if (h_cfg.verification != i)
-		{
 			vr_text[64 * i] = ' ';
-			ments[2 + i].caption = vr_text + (i * 64);
-		}
 		else
-		{
 			vr_text[64 * i] = '*';
-			ments[2 + i].caption = vr_text + (i * 64);
-		}
+		ments[2 + i].caption = vr_text + (i * 64);
 	}

 	memset(&ments[5], 0, sizeof(ment_t));
@@ -551,16 +481,8 @@ void config_verification()
 	u32 *temp_verification = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_verification != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.verification = *(u32 *)temp_verification;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}

 	free(ments);
@@ -604,7 +526,6 @@ void config_backlight()
 			bri_text[i * 32 + 1] = i + '0';
 			memcpy(bri_text + i * 32 + 2, "0%", 3);
 		}
-			
 		else
 			memcpy(bri_text + i * 32 + 1, "100%", 5);

@@ -619,16 +540,8 @@ void config_backlight()
 	u32 *temp_backlight = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_backlight != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.backlight = (*(u32 *)temp_backlight) * 2;
-		//Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}

 	free(ments);
@@ -685,16 +598,8 @@ void config_auto_hos_poweroff()
 	u32 *temp_autohosoff = (u32 *)tui_do_menu(&gfx_con, &menu);
 	if (temp_autohosoff != NULL)
 	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		gfx_con_setpos(&gfx_con, 0, 0);
-
 		h_cfg.autohosoff = *(u32 *)temp_autohosoff;
-		// Save choice to ini file.
-		if (!create_config_entry())
-			gfx_puts(&gfx_con, "\nConfiguration was saved!\n");
-		else
-			EPRINTF("\nConfiguration saving failed!");
-		gfx_puts(&gfx_con, "\nPress any key...");
+		_save_config();
 	}

 	free(ments);
@@ -704,3 +609,54 @@ void config_auto_hos_poweroff()
 		return;
 	btn_wait();
 }
+
+void config_nogc()
+{
+	gfx_clear_grey(&gfx_ctxt, 0x1B);
+	gfx_con_setpos(&gfx_con, 0, 0);
+
+	ment_t *ments = (ment_t *)malloc(sizeof(ment_t) * 5);
+	u32 *cb_values = (u32 *)malloc(sizeof(u32) * 2);
+
+	for (u32 j = 0; j < 2; j++)
+	{
+		cb_values[j] = j;
+		ments[j + 2].type = MENT_DATA;
+		ments[j + 2].data = &cb_values[j];
+	}
+
+	ments[0].type = MENT_BACK;
+	ments[0].caption = "Back";
+
+	ments[1].type = MENT_CHGLINE;
+
+	if (h_cfg.autonogc)
+	{
+		ments[2].caption = " Disable";
+		ments[3].caption = "*Auto";
+	}
+	else
+	{
+		ments[2].caption = "*Disable";
+		ments[3].caption = " Auto";
+	}
+
+	memset(&ments[4], 0, sizeof(ment_t));
+	menu_t menu = {ments, "No Gamecard", 0, 0};
+
+	u32 *temp_nogc = (u32 *)tui_do_menu(&gfx_con, &menu);
+	if (temp_nogc != NULL)
+	{
+		h_cfg.autonogc = *(u32 *)temp_nogc;
+		_save_config();
+	}
+
+	free(ments);
+	free(cb_values);
+
+	if (temp_nogc == NULL)
+		return;
+	btn_wait();
+}
+
+#pragma GCC pop_options
--- a/bootloader/config/config.h
+++ b/bootloader/config/config.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -25,14 +25,15 @@ typedef struct _hekate_config
 	u32 autoboot;
 	u32 autoboot_list;
 	u32 bootwait;
-	u32 customlogo;
 	u32 verification;
 	u32 backlight;
 	u32 autohosoff;
-	u32 errors;
+	u32 autonogc;
 	// Global temporary config.
 	int se_keygen_done;
 	u32 sbar_time_keeping;
+	u32 errors;
+	int sept_run;
 } hekate_config;

 typedef enum
@@ -44,9 +45,9 @@ void set_default_configuration();
 int create_config_entry();
 void config_autoboot();
 void config_bootdelay();
-void config_customlogo();
 void config_verification();
 void config_backlight();
 void config_auto_hos_poweroff();
+void config_nogc();

 #endif /* _CONFIG_H_ */
--- a/bootloader/config/ini.c
+++ b/bootloader/config/ini.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (C) 2018 CTCaer
+ * Copyright (C) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -24,11 +24,39 @@

 static char *_strdup(char *str)
 {
+	if (!str)
+		return NULL;
 	char *res = (char *)malloc(strlen(str) + 1);
 	strcpy(res, str);
+
 	return res;
 }

+u32 _find_section_name(char *lbuf, u32 lblen, char schar)
+{
+	u32 i;
+	for (i = 0; i < lblen  && lbuf[i] != schar && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
+		;
+	lbuf[i] = 0;
+
+	return i;
+}
+
+ini_sec_t *_ini_create_section(link_t *dst, ini_sec_t *csec, char *name, u8 type)
+{
+	if (csec)
+	{
+		list_append(dst, &csec->link);
+		csec = NULL;
+	}
+
+	csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
+	csec->name = _strdup(name);
+	csec->type = type;
+
+	return csec;
+}
+
 int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 {
 	u32 lblen;
@@ -43,6 +71,7 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)

 	memcpy(filename, ini_path, pathlen + 1);

+	// Get all ini filenames.
 	if (is_dir)
 	{
 		filelist = dirlist(filename, "*.ini", false);
@@ -57,6 +86,7 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)

 	do
 	{
+		// Copy ini filename in path string.
 		if (is_dir)
 		{
 			if (filelist[k * 256])
@@ -68,6 +98,7 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 				break;
 		}

+		// Open ini.
 		if (f_open(&fp, filename, FA_READ) != FR_OK)
 		{
 			free(filelist);
@@ -89,75 +120,31 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)

 			if (lblen > 2 && lbuf[0] == '[') // Create new section.
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
+				_find_section_name(lbuf, lblen, ']');

-				u32 i;
-				for (i = 0; i < lblen  && lbuf[i] != ']' && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = _strdup(&lbuf[1]);
-				csec->type = INI_CHOICE;
+				csec = _ini_create_section(dst, csec, &lbuf[1], INI_CHOICE);
 				list_init(&csec->kvs);
 			}
 			else if (lblen > 2 && lbuf[0] == '{') //Create new caption.
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
+				_find_section_name(lbuf, lblen, '}');

-				u32 i;
-				for (i = 0; i < lblen && lbuf[i] != '}' && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = _strdup(&lbuf[1]);
-				csec->type = INI_CAPTION;
+				csec = _ini_create_section(dst, csec, &lbuf[1], INI_CAPTION);
 				csec->color = 0xFF0AB9E6;
 			}
 			else if (lblen > 2 && lbuf[0] == '#') //Create empty lines and comments.
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
+				_find_section_name(lbuf, lblen, '\0');

-				u32 i;
-				for (i = 0; i < lblen && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = _strdup(&lbuf[1]);
-				csec->type = INI_COMMENT;
+				csec = _ini_create_section(dst, csec, &lbuf[1], INI_COMMENT);
 			}
 			else if (lblen < 2)
 			{
-				if (csec)
-				{
-					list_append(dst, &csec->link);
-					csec = NULL;
-				}
-
-				csec = (ini_sec_t *)malloc(sizeof(ini_sec_t));
-				csec->name = NULL;
-				csec->type = INI_NEWLINE;
+				csec = _ini_create_section(dst, csec, NULL, INI_NEWLINE);
 			}
 			else if (csec && csec->type == INI_CHOICE) //Extract key/value.
 			{
-				u32 i;
-				for (i = 0; i < lblen && lbuf[i] != '=' && lbuf[i] != '\n' && lbuf[i] != '\r'; i++)
-					;
-				lbuf[i] = 0;
+				u32 i = _find_section_name(lbuf, lblen, '=');

 				ini_kv_t *kv = (ini_kv_t *)malloc(sizeof(ini_kv_t));
 				kv->key = _strdup(&lbuf[0]);
@@ -169,8 +156,11 @@ int ini_parse(link_t *dst, char *ini_path, bool is_dir)
 		f_close(&fp);

 		if (csec)
+		{
 			list_append(dst, &csec->link);
-
+			if (is_dir)
+				csec = NULL;
+		}
 	} while (is_dir);

 	free(filename);
--- a/bootloader/frontend/fe_info.c
+++ b/bootloader/frontend/fe_info.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 * Copyright (c) 2018 balika011
 *
 * This program is free software; you can redistribute it and/or modify it
@@ -54,6 +54,9 @@ extern void emmcsn_path_impl(char *path, char *sub_dir, char *filename, sdmmc_st
 #define WPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, 0xFFCCCCCC)
 #define WPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, args, 0xFFCCCCCC)

+#pragma GCC push_options
+#pragma GCC optimize ("Os")
+
 void print_fuseinfo()
 {
 	gfx_clear_partial_grey(&gfx_ctxt, 0x1B, 0, 1256);
@@ -77,7 +80,7 @@ void print_fuseinfo()
 		break;
 	}
 	gfx_printf(&gfx_con, "Sdram ID:    %d\n", (fuse_read_odm(4) >> 3) & 0x1F);
-	gfx_printf(&gfx_con, "Burnt fuses: %d\n", burntFuses);
+	gfx_printf(&gfx_con, "Burnt fuses: %d / 64\n", burntFuses);
 	gfx_printf(&gfx_con, "Secure key:  %08X%08X%08X%08X\n\n\n",
 		byte_swap_32(FUSE(FUSE_PRIVATE_KEY0)), byte_swap_32(FUSE(FUSE_PRIVATE_KEY1)),
 		byte_swap_32(FUSE(FUSE_PRIVATE_KEY2)), byte_swap_32(FUSE(FUSE_PRIVATE_KEY3)));
@@ -85,7 +88,7 @@ void print_fuseinfo()
 	gfx_printf(&gfx_con, "%k(Unlocked) fuse cache:\n\n%k", 0xFF00DDFF, 0xFFCCCCCC);
 	gfx_hexdump(&gfx_con, 0x7000F900, (u8 *)0x7000F900, 0x2FC);

-	gfx_puts(&gfx_con, "Press POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");
+	gfx_puts(&gfx_con, "\nPress POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");

 	u32 btn = btn_wait();
 	if (btn & BTN_POWER)
@@ -349,7 +352,6 @@ void print_tsec_key()
 	gfx_con_setpos(&gfx_con, 0, 0);

 	u32 retries = 0;
-	u32 key_ver_max = 3;

 	tsec_ctxt_t tsec_ctxt;
 	sdmmc_storage_t storage;
@@ -365,85 +367,70 @@ void print_tsec_key()
 	const pkg1_id_t *pkg1_id = pkg1_identify(pkg1);
 	if (!pkg1_id)
 	{
-		EPRINTFARGS("Unknown package1 version for reading\nTSEC firmware (= '%s').",
-			(char *)pkg1 + 0x10);
+		EPRINTF("Unknown pkg1 version for reading\nTSEC firmware.");
 		goto out_wait;
 	}

-	u8 keys[0x10 * 3];
+	u8 keys[0x10 * 2];
+	memset(keys, 0x00, 0x20);

-	tsec_ctxt.size = 0xF00;
 	tsec_ctxt.fw = (u8 *)pkg1 + pkg1_id->tsec_off;
 	tsec_ctxt.pkg1 = pkg1;
 	tsec_ctxt.pkg11_off = pkg1_id->pkg11_off;
 	tsec_ctxt.secmon_base = pkg1_id->secmon_base;

-	if (pkg1_id->kb >= KB_FIRMWARE_VERSION_620)
-	{
+	if (pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
+		tsec_ctxt.size = 0xF00;
+	else if (pkg1_id->kb == KB_FIRMWARE_VERSION_620)
 		tsec_ctxt.size = 0x2900;
+	else
+	{
+		tsec_ctxt.size = 0x3000;
+		// Exit after TSEC key generation.
+		*((vu16 *)((u32)tsec_ctxt.fw + 0x2DB5)) = 0x02F8;
+	}
+
+	if (pkg1_id->kb == KB_FIRMWARE_VERSION_620)
+	{
 		u8 *tsec_paged = (u8 *)page_alloc(3);
 		memcpy(tsec_paged, (void *)tsec_ctxt.fw, tsec_ctxt.size);
 		tsec_ctxt.fw = tsec_paged;
-
-		key_ver_max = 1;
 	}

-	for (u32 i = 1; i <= key_ver_max; i++)
+	int res = 0;
+
+	while (tsec_query(keys, pkg1_id->kb, &tsec_ctxt) < 0)
 	{
-		tsec_ctxt.key_ver = i;
-		int res = 0;
+		memset(keys, 0x00, 0x20);

-		while (tsec_query(keys + ((i - 1) * 0x10), pkg1_id->kb, &tsec_ctxt) < 0)
+		retries++;
+
+		if (retries > 3)
 		{
-			if (pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
-				memset(keys + ((i - 1) * 0x10), 0x00, 0x10);
-			else
-				memset(keys, 0x00, 0x30);
-
-			retries++;
-
-			if (retries > 3)
-			{
-				res = -1;
-				break;
-			}
+			res = -1;
+			break;
 		}
-
-		if (pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
-		{
-			gfx_printf(&gfx_con, "%kTSEC key %d: %k", 0xFF00DDFF, i, 0xFFCCCCCC);
-
-			if (res >= 0)
-			{
-				for (u32 j = 0; j < 0x10; j++)
-					gfx_printf(&gfx_con, "%02X", keys[((i - 1) * 0x10) + j]);
-			}
-			else
-				EPRINTFARGS("ERROR %X", res);
-			gfx_putc(&gfx_con, '\n');
-		}
-		else
-		{
-			gfx_printf(&gfx_con, "%kTSEC key:  %k", 0xFF00DDFF, 0xFFCCCCCC);
-
-			if (res >= 0)
-			{
-				for (u32 j = 0; j < 0x10; j++)
-					gfx_printf(&gfx_con, "%02X", keys[j]);
-				gfx_putc(&gfx_con, '\n');
-
-				gfx_printf(&gfx_con, "%kTSEC root: %k", 0xFF00DDFF, 0xFFCCCCCC);
-				for (u32 j = 0; j < 0x10; j++)
-					gfx_printf(&gfx_con, "%02X", keys[0x10 + j]);
-			}
-			else
-				EPRINTFARGS("ERROR %X", res);
-			gfx_putc(&gfx_con, '\n');
-		}
-		
 	}

-	gfx_puts(&gfx_con, "\nPress POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");
+	gfx_printf(&gfx_con, "%kTSEC key:  %k", 0xFF00DDFF, 0xFFCCCCCC);
+
+	if (res >= 0)
+	{
+		for (u32 j = 0; j < 0x10; j++)
+			gfx_printf(&gfx_con, "%02X", keys[j]);
+		
+
+		if (pkg1_id->kb == KB_FIRMWARE_VERSION_620)
+		{
+			gfx_printf(&gfx_con, "\n%kTSEC root: %k", 0xFF00DDFF, 0xFFCCCCCC);
+			for (u32 j = 0; j < 0x10; j++)
+				gfx_printf(&gfx_con, "%02X", keys[0x10 + j]);
+		}
+	}
+	else
+		EPRINTFARGS("ERROR %X\n", res);
+
+	gfx_puts(&gfx_con, "\n\nPress POWER to dump them to SD Card.\nPress VOL to go to the menu.\n");

 	u32 btn = btn_wait();
 	if (btn & BTN_POWER)
@@ -452,7 +439,7 @@ void print_tsec_key()
 		{
 			char path[64];
 			emmcsn_path_impl(path, "/dumps", "tsec_keys.bin", NULL);
-			if (!sd_save_to_file(keys, 0x10 * 3, path))
+			if (!sd_save_to_file(keys, 0x10 * 2, path))
 				gfx_puts(&gfx_con, "\nDone!\n");
 			sd_unmount();
 		}
@@ -704,3 +691,5 @@ void bootrom_ipatches_info()
 		btn_wait();
 	}
 }
+
+#pragma GCC pop_options
--- a/bootloader/frontend/fe_tools.c
+++ b/bootloader/frontend/fe_tools.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 * Copyright (c) 2018 Reisyukaku
 *
 * This program is free software; you can redistribute it and/or modify it
@@ -26,6 +26,7 @@
 #include "../hos/hos.h"
 #include "../hos/pkg1.h"
 #include "../hos/pkg2.h"
+#include "../hos/sept.h"
 #include "../libs/fatfs/ff.h"
 #include "../mem/heap.h"
 #include "../power/max7762x.h"
@@ -35,7 +36,9 @@
 #include "../utils/btn.h"
 #include "../utils/util.h"

+extern boot_cfg_t *b_cfg;
 extern hekate_config h_cfg;
+
 extern gfx_ctxt_t gfx_ctxt;
 extern gfx_con_t gfx_con;
 extern sdmmc_storage_t sd_storage;
@@ -82,20 +85,34 @@ void dump_packages12()
 	if (!pkg1_id)
 	{
 		gfx_con.fntsz = 8;
-		EPRINTFARGS("Unknown package1 version for reading\nTSEC firmware (= '%s').", (char *)pkg1 + 0x10);
+		EPRINTF("Unknown pkg1 version for reading\nTSEC firmware.");
 		goto out_free;
 	}

 	kb = pkg1_id->kb;

-	if (!h_cfg.se_keygen_done || kb >= KB_FIRMWARE_VERSION_620)
+	if (!h_cfg.se_keygen_done || kb == KB_FIRMWARE_VERSION_620)
 	{
-		tsec_ctxt.key_ver = 1;
 		tsec_ctxt.fw = (void *)pkg1 + pkg1_id->tsec_off;
 		tsec_ctxt.pkg1 = (void *)pkg1;
 		tsec_ctxt.pkg11_off = pkg1_id->pkg11_off;
 		tsec_ctxt.secmon_base = pkg1_id->secmon_base;

+		if (kb >= KB_FIRMWARE_VERSION_700 && !h_cfg.sept_run)
+		{
+			b_cfg->autoboot = 0;
+			b_cfg->autoboot_list = 0;
+
+			gfx_printf(&gfx_con, "sept will run to get the keys.\nThen rerun this option.");
+			btn_wait();
+
+			if (!reboot_to_sept((u8 *)tsec_ctxt.fw))
+			{
+				gfx_printf(&gfx_con, "Failed to run sept\n");
+				goto out_free;
+			}
+		}
+
 		// Read keyblob.
 		u8 *keyblob = (u8 *)calloc(NX_EMMC_BLOCKSIZE, 1);
 		sdmmc_storage_read(&storage, 0x180000 / NX_EMMC_BLOCKSIZE + kb, 1, keyblob);
@@ -110,41 +127,45 @@ void dump_packages12()
 	if (kb <= KB_FIRMWARE_VERSION_600)
 		pkg1_decrypt(pkg1_id, pkg1);

-	pkg1_unpack(warmboot, secmon, loader, pkg1_id, pkg1);
-
-	// Display info.
-	gfx_printf(&gfx_con, "%kNX Bootloader size:  %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->ldr_size);
-
-	gfx_printf(&gfx_con, "%kSecure monitor addr: %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->secmon_base);
-	gfx_printf(&gfx_con, "%kSecure monitor size: %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->sm_size);
-
-	gfx_printf(&gfx_con, "%kWarmboot addr:       %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->warmboot_base);
-	gfx_printf(&gfx_con, "%kWarmboot size:       %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->wb_size);
-
 	char path[64];
-	// Dump package1.1.
-	emmcsn_path_impl(path, "/pkg1", "pkg1_decr.bin", &storage);
-	if (sd_save_to_file(pkg1, 0x40000, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "\nFull package1 dumped to pkg1_decr.bin\n");

-	// Dump nxbootloader.
-	emmcsn_path_impl(path, "/pkg1", "nxloader.bin", &storage);
-	if (sd_save_to_file(loader, hdr->ldr_size, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "NX Bootloader dumped to nxloader.bin\n");
+	if (kb <= KB_FIRMWARE_VERSION_620)
+	{
+		pkg1_unpack(warmboot, secmon, loader, pkg1_id, pkg1);
+	
+		// Display info.
+		gfx_printf(&gfx_con, "%kNX Bootloader size:  %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->ldr_size);
+	
+		gfx_printf(&gfx_con, "%kSecure monitor addr: %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->secmon_base);
+		gfx_printf(&gfx_con, "%kSecure monitor size: %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->sm_size);
+	
+		gfx_printf(&gfx_con, "%kWarmboot addr:       %k0x%05X\n", 0xFFC7EA46, 0xFFCCCCCC, pkg1_id->warmboot_base);
+		gfx_printf(&gfx_con, "%kWarmboot size:       %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, hdr->wb_size);

-	// Dump secmon.
-	emmcsn_path_impl(path, "/pkg1", "secmon.bin", &storage);
-	if (sd_save_to_file(secmon, hdr->sm_size, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "Secure Monitor dumped to secmon.bin\n");
-
-	// Dump warmboot.
-	emmcsn_path_impl(path, "/pkg1", "warmboot.bin", &storage);
-	if (sd_save_to_file(warmboot, hdr->wb_size, path))
-		goto out_free;
-	gfx_puts(&gfx_con, "Warmboot dumped to warmboot.bin\n\n\n");
+		// Dump package1.1.
+		emmcsn_path_impl(path, "/pkg1", "pkg1_decr.bin", &storage);
+		if (sd_save_to_file(pkg1, 0x40000, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "\npkg1 dumped to pkg1_decr.bin\n");
+	
+		// Dump nxbootloader.
+		emmcsn_path_impl(path, "/pkg1", "nxloader.bin", &storage);
+		if (sd_save_to_file(loader, hdr->ldr_size, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "NX Bootloader dumped to nxloader.bin\n");
+	
+		// Dump secmon.
+		emmcsn_path_impl(path, "/pkg1", "secmon.bin", &storage);
+		if (sd_save_to_file(secmon, hdr->sm_size, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "Secure Monitor dumped to secmon.bin\n");
+	
+		// Dump warmboot.
+		emmcsn_path_impl(path, "/pkg1", "warmboot.bin", &storage);
+		if (sd_save_to_file(warmboot, hdr->wb_size, path))
+			goto out_free;
+		gfx_puts(&gfx_con, "Warmboot dumped to warmboot.bin\n\n\n");
+	}

 	// Dump package2.1.
 	sdmmc_storage_set_mmc_partition(&storage, 0);
@@ -180,7 +201,7 @@ void dump_packages12()
 	emmcsn_path_impl(path, "/pkg2", "pkg2_decr.bin", &storage);
 	if (sd_save_to_file(pkg2, pkg2_hdr->sec_size[PKG2_SEC_KERNEL] + pkg2_hdr->sec_size[PKG2_SEC_INI1], path))
 		goto out;
-	gfx_puts(&gfx_con, "\nFull package2 dumped to pkg2_decr.bin\n");
+	gfx_puts(&gfx_con, "\npkg2 dumped to pkg2_decr.bin\n");

 	// Dump kernel.
 	emmcsn_path_impl(path, "/pkg2", "kernel.bin", &storage);
@@ -193,7 +214,7 @@ void dump_packages12()
 	if (sd_save_to_file(pkg2_hdr->data + pkg2_hdr->sec_size[PKG2_SEC_KERNEL],
 		pkg2_hdr->sec_size[PKG2_SEC_INI1], path))
 		goto out;
-	gfx_puts(&gfx_con, "INI1 kip1 package dumped to ini1.bin\n");
+	gfx_puts(&gfx_con, "INI1 dumped to ini1.bin\n");

 	gfx_puts(&gfx_con, "\nDone. Press any key...\n");

@@ -430,7 +451,7 @@ void _fix_sd_attr(u32 type)
 			break;
 		}

-		gfx_printf(&gfx_con, "Traversing all %s files!\nThis may take some time, please wait...\n\n", label);
+		gfx_printf(&gfx_con, "Traversing all %s files!\nThis may take some time...\n\n", label);
 		_fix_attributes(path, &total, type, type);
 		gfx_printf(&gfx_con, "%kTotal archive bits cleared: %d!%k\n\nDone! Press any key...", 0xFF96FF00, total, 0xFFCCCCCC);
 		sd_unmount();
@@ -553,8 +574,10 @@ void fix_battery_desync()
 }*/

 /*
-//#include "../modules/hekate_libsys_minerva/mtc.h"
-//mtc_config_t mtc_cfg;
+#include "../../modules/hekate_libsys_minerva/mtc.h"
+#include "../ianos/ianos.h"
+#include "../soc/fuse.h"
+#include "../soc/clock.h"

 void minerva()
 {
@@ -582,6 +605,9 @@ void minerva()
 			break;
 	}

+	// Change DRAM voltage.
+	//i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD1, 42); //40 = (1000 * 1100 - 600000) / 12500 -> 1.1V
+
 	mtc_cfg.rate_from = mtc_cfg.mtc_table[curr_ram_idx].rate_khz;
 	mtc_cfg.rate_to = 800000;
 	mtc_cfg.train_mode = OP_TRAIN_SWITCH;
@@ -590,7 +616,7 @@ void minerva()
 	
 	// Thefollowing frequency needs periodic training every 100ms.
 	//msleep(200);
-	
+
 	//mtc_cfg.rate_to = 1600000;
 	//gfx_printf(&gfx_con, "Training and switching  %7d -> %7d\n\n", mtc_cfg.current_emc_table->rate_khz, 1600000);
 	//ianos_loader(false, "bootloader/sys/libsys_minerva.bso", DRAM_LIB, (void *)&mtc_cfg);
--- a/bootloader/frontend/fe_tools.h
+++ b/bootloader/frontend/fe_tools.h
@@ -23,5 +23,6 @@ void fix_sd_all_attr();
 void fix_sd_nin_attr();
 void fix_battery_desync();
 void menu_autorcm();
+//void minerva();

 #endif
--- a/bootloader/gfx/di.c
+++ b/bootloader/gfx/di.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (C) 2018 CTCaer
+ * Copyright (c) 2018 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -23,6 +23,7 @@
 #include "../soc/i2c.h"
 #include "../soc/pmc.h"
 #include "../power/max77620.h"
+#include "../power/max7762x.h"
 #include "../soc/gpio.h"
 #include "../soc/pinmux.h"
 #include "../soc/clock.h"
@@ -42,8 +43,8 @@ static void _display_dsi_wait(u32 timeout, u32 off, u32 mask)
 void display_init()
 {
 	// Power on.
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_LDO0_CFG, 0xD0); // Configure to 1.2V.
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO7, 0x09);
+	max77620_regulator_set_volt_and_flags(REGULATOR_LDO0, 1200000, MAX77620_POWER_MODE_NORMAL); // Configure to 1.2V.
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO7, MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH | MAX77620_CNFG_GPIO_DRV_PUSHPULL);

 	// Enable MIPI CAL, DSI, DISP1, HOST1X, UART_FST_MIPI_CAL, DSIA LP clocks.
 	CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x1010000;
--- a/bootloader/gfx/di.h
+++ b/bootloader/gfx/di.h
@@ -238,6 +238,10 @@
 #define DC_WINBUF_ADDR_H_OFFSET 0x806
 #define DC_WINBUF_ADDR_V_OFFSET 0x808
 #define DC_WINBUF_SURFACE_KIND 0x80B
+#define  PITCH	(0 << 0)
+#define  TILED	(1 << 0)
+#define  BLOCK	(2 << 0)
+#define  BLOCK_HEIGHT(x) (((x) & 0x7) << 4)

 /*! Display serial interface registers. */
 #define _DSIREG(reg) ((reg) * 4)
--- a/bootloader/gfx/tui.c
+++ b/bootloader/gfx/tui.c
@@ -15,13 +15,12 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

+#include "di.h"
 #include "tui.h"
 #include "../utils/btn.h"
 #include "../config/config.h"
 #include "../power/max17050.h"
 #include "../utils/util.h"
-#include "../config/config.h"
-#include "di.h"

 #ifdef MENU_LOGO_ENABLE
 extern u8 *Kc_MENU_LOGO;
--- a/bootloader/hos/hos.c
+++ b/bootloader/hos/hos.c
@@ -2,7 +2,7 @@
 * Copyright (c) 2018 naehrwert
 * Copyright (c) 2018 st4rk
 * Copyright (c) 2018 Ced2911
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 * Copyright (c) 2018 balika011
 *
 * This program is free software; you can redistribute it and/or modify it
@@ -22,6 +22,7 @@

 #include "hos.h"
 #include "hos_config.h"
+#include "sept.h"
 #include "secmon_exo.h"
 #include "../config/config.h"
 #include "../gfx/di.h"
@@ -43,6 +44,7 @@
 extern gfx_ctxt_t gfx_ctxt;
 extern gfx_con_t gfx_con;

+extern boot_cfg_t *b_cfg;
 extern hekate_config h_cfg;

 extern void sd_unmount();
@@ -50,6 +52,19 @@ extern void sd_unmount();
 //#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)
 #define DPRINTF(...)

+#define SECMON_MB_ADDR  0x40002EF8
+#define SECMON7_MB_ADDR 0x400000F8
+
+ // Secmon mailbox.
+typedef struct _secmon_mailbox_t
+{
+	//  < 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM and pkg2 ready, 3: Continue boot.
+	// >= 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM ready, 4: pkg2 ready and continue boot.
+	u32 in;
+	// Non-zero: Secmon ready.
+	u32 out;
+} secmon_mailbox_t;
+
 static const u8 keyblob_keyseeds[][0x10] = {
 	{ 0xDF, 0x20, 0x6F, 0x59, 0x44, 0x54, 0xEF, 0xDC, 0x70, 0x74, 0x48, 0x3B, 0x0D, 0xED, 0x9F, 0xD3 }, //1.0.0
 	{ 0x0C, 0x25, 0x61, 0x5D, 0x68, 0x4C, 0xEB, 0x42, 0x1C, 0x23, 0x79, 0xEA, 0x82, 0x25, 0x12, 0xAC }, //3.0.0
@@ -68,7 +83,7 @@ static const u8 master_keyseed_retail[0x10] =
 static const u8 console_keyseed[0x10] =
 	{ 0x4F, 0x02, 0x5F, 0x0E, 0xB6, 0x6D, 0x11, 0x0E, 0xDC, 0x32, 0x7D, 0x41, 0x86, 0xC2, 0xF4, 0x78 };

-static const u8 key8_keyseed[] =
+static const u8 package2_keyseed[] =
 	{ 0xFB, 0x8B, 0x6A, 0x9C, 0x79, 0x00, 0xC8, 0x49, 0xEF, 0xD2, 0x4D, 0x85, 0x4D, 0x30, 0xA0, 0xC7 };

 static const u8 master_keyseed_4xx_5xx_610[0x10] = 
@@ -129,9 +144,7 @@ void _pmc_scratch_lock(u32 kb)
 		PMC(APBDEV_PMC_SEC_DISABLE7) = 0xFFFFFFFF;
 		PMC(APBDEV_PMC_SEC_DISABLE8) = 0xFFAAFFFF;
 		break;
-	case KB_FIRMWARE_VERSION_400:
-	case KB_FIRMWARE_VERSION_500:
-	case KB_FIRMWARE_VERSION_600:
+	default:
 		PMC(APBDEV_PMC_SEC_DISABLE2) |= 0x3FCFFFF;
 	    PMC(APBDEV_PMC_SEC_DISABLE4) |= 0x3F3FFFFF;
 	    PMC(APBDEV_PMC_SEC_DISABLE5)  = 0xFFFFFFFF;
@@ -165,34 +178,44 @@ int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt)
 	u8 tmp[0x20];
 	u32 retries = 0;

-	tsec_ctxt->size = 0xF00;
-
 	if (kb > KB_FIRMWARE_VERSION_MAX)
 		return 0;

-	// Get TSEC key.
-	if (kb >= KB_FIRMWARE_VERSION_620)
-	{
+	if (kb <= KB_FIRMWARE_VERSION_600)
+		tsec_ctxt->size = 0xF00;
+	else if (kb == KB_FIRMWARE_VERSION_620)
 		tsec_ctxt->size = 0x2900;
+	else
+		tsec_ctxt->size = 0x3000;
+
+	// Prepare smmu tsec page for 6.2.0.
+	if (kb == KB_FIRMWARE_VERSION_620)
+	{
 		u8 *tsec_paged = (u8 *)page_alloc(3);
 		memcpy(tsec_paged, (void *)tsec_ctxt->fw, tsec_ctxt->size);
 		tsec_ctxt->fw = tsec_paged;
 	}

-	while (tsec_query(tmp, kb, tsec_ctxt) < 0)
+	// Get TSEC key.
+	if (kb <= KB_FIRMWARE_VERSION_620)
 	{
-		memset(tmp, 0x00, 0x20);
-		retries++;
-
-		// We rely on racing conditions, make sure we cover even the unluckiest cases.
-		if (retries > 15)
+		while (tsec_query(tmp, kb, tsec_ctxt) < 0)
 		{
-			gfx_printf(&gfx_con, "%k\nFailed to get TSEC keys. Please try again.%k\n\n", 0xFFFF0000, 0xFFCCCCCC);
-			return 0;
+			memset(tmp, 0x00, 0x20);
+			retries++;
+
+			// We rely on racing conditions, make sure we cover even the unluckiest cases.
+			if (retries > 15)
+			{
+				gfx_printf(&gfx_con, "%k\nFailed to get TSEC keys. Please try again.%k\n\n", 0xFFFF0000, 0xFFCCCCCC);
+				return 0;
+			}
 		}
 	}

-	if (kb >= KB_FIRMWARE_VERSION_620)
+	if (kb >= KB_FIRMWARE_VERSION_700)
+		se_aes_unwrap_key(8, 12, package2_keyseed);
+	else if (kb == KB_FIRMWARE_VERSION_620)
 	{
 		// Set TSEC key.
 		se_aes_key_set(12, tmp, 0x10);
@@ -203,7 +226,7 @@ int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt)
 		se_aes_key_set(8, tmp + 0x10, 0x10);
 		se_aes_unwrap_key(8, 8, master_keyseed_620);
 		se_aes_unwrap_key(8, 8, master_keyseed_retail);
-		se_aes_unwrap_key(8, 8, key8_keyseed);
+		se_aes_unwrap_key(8, 8, package2_keyseed);
 	}
 	else
 	{
@@ -264,7 +287,7 @@ int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt)

 		// Package2 key.
 		se_key_acc_ctrl(8, 0x15);
-		se_aes_unwrap_key(8, 12, key8_keyseed);
+		se_aes_unwrap_key(8, 12, package2_keyseed);
 	}

 	return 1;
@@ -285,10 +308,10 @@ static int _read_emmc_pkg1(launch_ctxt_t *ctxt)
 	ctxt->pkg1_id = pkg1_identify(ctxt->pkg1);
 	if (!ctxt->pkg1_id)
 	{
-		gfx_printf(&gfx_con, "%kUnknown pkg1,\nVersion (= '%s').%k\n", 0xFFFF0000, (char *)ctxt->pkg1 + 0x10, 0xFFCCCCCC);
+		gfx_printf(&gfx_con, "%kUnknown pkg1 version.%k\n", 0xFFFF0000, 0xFFCCCCCC);
 		goto out;
 	}
-	gfx_printf(&gfx_con, "Identified pkg1 ('%s'),\nKeyblob version %d\n\n", (char *)(ctxt->pkg1 + 0x10), ctxt->pkg1_id->kb);
+	gfx_printf(&gfx_con, "Identified pkg1 and Keyblob %d\n\n", ctxt->pkg1_id->kb);

 	// Read the correct keyblob.
 	ctxt->keyblob = (u8 *)calloc(NX_EMMC_BLOCKSIZE, 1);
@@ -362,6 +385,7 @@ int hos_launch(ini_sec_t *cfg)
 {
 	launch_ctxt_t ctxt;
 	tsec_ctxt_t tsec_ctxt;
+	volatile secmon_mailbox_t *secmon_mb;

 	memset(&ctxt, 0, sizeof(launch_ctxt_t));
 	list_init(&ctxt.kip1_list);
@@ -371,7 +395,7 @@ int hos_launch(ini_sec_t *cfg)
 	gfx_con_setpos(&gfx_con, 0, 0);

 	// Try to parse config if present.
-	if (cfg && !_parse_boot_config(&ctxt, cfg))
+	if (cfg && !parse_boot_config(&ctxt, cfg))
 		return 0;

 	gfx_printf(&gfx_con, "Initializing...\n\n");
@@ -380,17 +404,26 @@ int hos_launch(ini_sec_t *cfg)
 	if (!_read_emmc_pkg1(&ctxt))
 		return 0;

-	gfx_printf(&gfx_con, "Loaded pkg1 and keyblob\n");
+	// Check if fuses lower than 4.0.0 and if yes apply NO Gamecard patch.
+	if (h_cfg.autonogc && !(fuse_read_odm(7) & ~0xF) && ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_400)
+		config_kip1patch(&ctxt, "nogc");
+
+	gfx_printf(&gfx_con, "Loaded pkg1 & keyblob\n");

 	// Generate keys.
-	if (!h_cfg.se_keygen_done || ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_620)
+	if (!h_cfg.se_keygen_done || ctxt.pkg1_id->kb == KB_FIRMWARE_VERSION_620)
 	{
-		tsec_ctxt.key_ver = 1;
 		tsec_ctxt.fw = (u8 *)ctxt.pkg1 + ctxt.pkg1_id->tsec_off;
 		tsec_ctxt.pkg1 = ctxt.pkg1;
 		tsec_ctxt.pkg11_off = ctxt.pkg1_id->pkg11_off;
 		tsec_ctxt.secmon_base = ctxt.pkg1_id->secmon_base;

+		if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_700 && !h_cfg.sept_run)
+		{
+			gfx_printf(&gfx_con, "Failed to run sept\n");
+			return 0;
+		}
+
 		if (!keygen(ctxt.keyblob, ctxt.pkg1_id->kb, &tsec_ctxt))
 			return 0;
 		DPRINTF("Generated keys\n");
@@ -404,9 +437,13 @@ int hos_launch(ini_sec_t *cfg)
 		if (ctxt.pkg1_id->kb <= KB_FIRMWARE_VERSION_600)
 			pkg1_decrypt(ctxt.pkg1_id, ctxt.pkg1);

-		pkg1_unpack((void *)ctxt.pkg1_id->warmboot_base, (void *)ctxt.pkg1_id->secmon_base, NULL, ctxt.pkg1_id, ctxt.pkg1);
-
-		gfx_printf(&gfx_con, "Decrypted and unpacked pkg1\n");
+		if (ctxt.pkg1_id->kb <= KB_FIRMWARE_VERSION_620)
+		{
+			pkg1_unpack((void *)ctxt.pkg1_id->warmboot_base, (void *)ctxt.pkg1_id->secmon_base, NULL, ctxt.pkg1_id, ctxt.pkg1);
+			gfx_printf(&gfx_con, "Decrypted & unpacked pkg1\n");
+		}
+		else
+			return 0;
 	}

 	// Replace 'warmboot.bin' if requested.
@@ -414,6 +451,11 @@ int hos_launch(ini_sec_t *cfg)
 		memcpy((void *)ctxt.pkg1_id->warmboot_base, ctxt.warmboot, ctxt.warmboot_size);
 	else
 	{
+		if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_700)
+		{
+			gfx_printf(&gfx_con, "%kNo warmboot provided!%k\n", 0xFFFF0000, 0xFFCCCCCC);
+			return 0;
+		}
 		// Else we patch it to allow downgrading.
 		patch_t *warmboot_patchset = ctxt.pkg1_id->warmboot_patchset;
 		gfx_printf(&gfx_con, "%kPatching Warmboot%k\n", 0xFFFFBA00, 0xFFCCCCCC);
@@ -427,7 +469,7 @@ int hos_launch(ini_sec_t *cfg)
 	// Replace 'SecureMonitor' if requested.
 	if (ctxt.secmon)
 		memcpy((void *)ctxt.pkg1_id->secmon_base, ctxt.secmon, ctxt.secmon_size);
-	else
+	else if (ctxt.pkg1_id->secmon_patchset)
 	{
 		// Else we patch it to allow for an unsigned package2 and patched kernel.
 		patch_t *secmon_patchset = ctxt.pkg1_id->secmon_patchset;
@@ -436,7 +478,7 @@ int hos_launch(ini_sec_t *cfg)
 			*(vu32 *)(ctxt.pkg1_id->secmon_base + secmon_patchset[i].off) = secmon_patchset[i].val;
 	}

-	gfx_printf(&gfx_con, "Loaded warmboot.bin and secmon\n");
+	gfx_printf(&gfx_con, "Loaded warmboot and secmon\n");

 	// Read package2.
 	u8 *bootConfigBuf = _read_emmc_pkg2(&ctxt);
@@ -487,13 +529,15 @@ int hos_launch(ini_sec_t *cfg)
 						for (u32 j = 0; j < kernel_patchset[i].val; j++)
 							*(vu32 *)(ctxt.kernel + kernel_patchset[i].off + (j << 2)) = temp[j];
 					}
+					else if (kernel_patchset[i].id < SVC_VERIFY_DS)
+						*(vu32 *)(ctxt.kernel + kernel_patchset[i].off) = kernel_patchset[i].val;
 				}
 			}
 		}
 	}

 	// Merge extra KIP1s into loaded ones.
-	gfx_printf(&gfx_con, "%kPatching kernel initial processes%k\n", 0xFFFFBA00, 0xFFCCCCCC);
+	gfx_printf(&gfx_con, "%kPatching kips%k\n", 0xFFFFBA00, 0xFFCCCCCC);
 	LIST_FOREACH_ENTRY(merge_kip_t, mki, &ctxt.kip1_list, link)
 		pkg2_merge_kip(&kip1_info, (pkg2_kip1_t *)mki->kip1);

@@ -501,18 +545,17 @@ int hos_launch(ini_sec_t *cfg)
 	const char* unappliedPatch = pkg2_patch_kips(&kip1_info, ctxt.kip1_patches);
 	if (unappliedPatch != NULL)
 	{
-		gfx_printf(&gfx_con, "%kREQUESTED PATCH '%s' NOT APPLIED!%k\n", 0xFFFF0000, unappliedPatch, 0xFFCCCCCC);
+		gfx_printf(&gfx_con, "%kFailed to apply '%s'!%k\n", 0xFFFF0000, unappliedPatch, 0xFFCCCCCC);
 		sd_unmount(); // Just exiting is not enough until pkg2_patch_kips stops modifying the string passed into it.
-		while(1) {} // MUST stop here, because if user requests 'nogc' but it's not applied, their GC controller gets updated!
+
+		_free_launch_components(&ctxt);
+		return 0; // MUST stop here, because if user requests 'nogc' but it's not applied, their GC controller gets updated!
 	}

 	// Rebuild and encrypt package2.
 	pkg2_build_encrypt((void *)0xA9800000, ctxt.kernel, ctxt.kernel_size, &kip1_info);

-	gfx_printf(&gfx_con, "Rebuilt and loaded pkg2\n");
-
-	// Unmount SD card.
-	sd_unmount();
+	gfx_printf(&gfx_con, "Rebuilt & loaded pkg2\n");

 	gfx_printf(&gfx_con, "\n%kBooting...%k\n", 0xFF96FF00, 0xFFCCCCCC);

@@ -543,7 +586,7 @@ int hos_launch(ini_sec_t *cfg)
 	case KB_FIRMWARE_VERSION_600:
 		se_key_acc_ctrl(12, 0xFF);
 		se_key_acc_ctrl(15, 0xFF);
-	case KB_FIRMWARE_VERSION_620:
+	default:
 		bootStateDramPkg2 = 2;
 		bootStatePkg2Continue = 4;
 		break;
@@ -566,7 +609,10 @@ int hos_launch(ini_sec_t *cfg)

 	// Config Exosphère if booting full Atmosphère.
 	if (ctxt.atmosphere && ctxt.secmon)
-		config_exosphere(ctxt.pkg1_id->id, ctxt.pkg1_id->kb, ctxt.debugmode);
+		config_exosphere(ctxt.pkg1_id->id, ctxt.pkg1_id->kb, (void *)ctxt.pkg1_id->warmboot_base, ctxt.pkg1, ctxt.debugmode);
+
+	// Unmount SD card.
+	sd_unmount();

 	// Finalize MC carveout.
 	if (ctxt.pkg1_id->kb <= KB_FIRMWARE_VERSION_301)
@@ -579,39 +625,42 @@ int hos_launch(ini_sec_t *cfg)
 	if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_620)
 		_sysctr0_reset();

+	// < 4.0.0 pkg1.1 locks PMC scratches.
+	//_pmc_scratch_lock(ctxt.pkg1_id->kb);
+
+	// Set secmon mailbox address.
+	if (ctxt.pkg1_id->kb >= KB_FIRMWARE_VERSION_700)
+		secmon_mb = (secmon_mailbox_t *)SECMON7_MB_ADDR;
+	else
+		secmon_mb = (secmon_mailbox_t *)SECMON_MB_ADDR;
+
+	// Start from DRAM ready signal and reset outgoing value.
+	secmon_mb->in = bootStateDramPkg2;
+	secmon_mb->out = 0;
+
 	// Free allocated memory.
 	ini_free_section(cfg);
 	_free_launch_components(&ctxt);

-	// < 4.0.0 pkg1.1 locks PMC scratches.
-	//_pmc_scratch_lock(ctxt.pkg1_id->kb);
-
-	//  < 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM and pkg2 ready, 3: Continue boot.
-	// >= 4.0.0 Signals - 0: Not ready, 1: BCT ready, 2: DRAM ready, 4: pkg2 ready and continue boot.
-	vu32 *mb_in = (vu32 *)0x40002EF8;
-	// Non-zero: Secmon ready.
-	vu32 *mb_out = (vu32 *)0x40002EFC;
-
-	// Start from DRAM ready signal.
-	*mb_in = bootStateDramPkg2;
-	*mb_out = 0;
-
 	// Disable display. This must be executed before secmon to provide support for all fw versions.
 	display_end();

+	// Clear EMC_SCRATCH0.
+	EMC(EMC_SCRATCH0) = 0;
+
 	// Wait for secmon to get ready.
 	if (smmu_is_used())
 		smmu_exit();
    else
 		cluster_boot_cpu0(ctxt.pkg1_id->secmon_base);
-	while (!*mb_out)
+	while (!secmon_mb->out)
 		usleep(1); // This only works when in IRAM or with a trained DRAM.

 	// Signal pkg2 ready and continue boot.
-	*mb_in = bootStatePkg2Continue;
+	secmon_mb->in = bootStatePkg2Continue;

 	// Halt ourselves in waitevent state and resume if there's JTAG activity.
-	while (1)
+	while (true)
 		FLOW_CTLR(FLOW_CTLR_HALT_COP_EVENTS) = 0x50000000;

 	return 0;
--- a/bootloader/hos/hos.h
+++ b/bootloader/hos/hos.h
@@ -30,7 +30,8 @@
 #define KB_FIRMWARE_VERSION_500 4
 #define KB_FIRMWARE_VERSION_600 5
 #define KB_FIRMWARE_VERSION_620 6
-#define KB_FIRMWARE_VERSION_MAX KB_FIRMWARE_VERSION_620
+#define KB_FIRMWARE_VERSION_700 7
+#define KB_FIRMWARE_VERSION_MAX KB_FIRMWARE_VERSION_700

 #define HOS_PKG11_MAGIC 0x31314B50

--- a/bootloader/hos/hos_config.c
+++ b/bootloader/hos/hos_config.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -156,7 +156,7 @@ static int _config_atmosphere(launch_ctxt_t *ctxt, const char *value)
 	return 1;
 }

-static int _config_kip1patch(launch_ctxt_t *ctxt, const char *value)
+int config_kip1patch(launch_ctxt_t *ctxt, const char *value)
 {
 	if (value == NULL)
 		return 0;
@@ -197,14 +197,14 @@ static const cfg_handler_t _config_handlers[] = {
 	{ "secmon", _config_secmon },
 	{ "kernel", _config_kernel },
 	{ "kip1", _config_kip1 },
-	{ "kip1patch", _config_kip1patch },
+	{ "kip1patch", config_kip1patch },
 	{ "fullsvcperm", _config_svcperm },
 	{ "debugmode", _config_debugmode },
 	{ "atmosphere", _config_atmosphere },
 	{ NULL, NULL },
 };

-int _parse_boot_config(launch_ctxt_t *ctxt, ini_sec_t *cfg)
+int parse_boot_config(launch_ctxt_t *ctxt, ini_sec_t *cfg)
 {
 	LIST_FOREACH_ENTRY(ini_kv_t, kv, &cfg->kvs, link)
 	{
--- a/bootloader/hos/hos_config.h
+++ b/bootloader/hos/hos_config.h
@@ -19,7 +19,8 @@

 #include "hos.h"

-int _parse_boot_config(launch_ctxt_t *ctxt, ini_sec_t *cfg);
+int parse_boot_config(launch_ctxt_t *ctxt, ini_sec_t *cfg);
+int config_kip1patch(launch_ctxt_t *ctxt, const char *value);

 #endif

--- a/bootloader/hos/pkg1.c
+++ b/bootloader/hos/pkg1.c
@@ -1,7 +1,7 @@
 /*
 * Copyright (c) 2018 naehrwert
 * Copyright (c) 2018 st4rk
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 * Copyright (c) 2018 balika011
 *
 * This program is free software; you can redistribute it and/or modify it
@@ -20,8 +20,11 @@
 #include <string.h>

 #include "pkg1.h"
-#include "../utils/aarch64_util.h"
+#include "../gfx/gfx.h"
 #include "../sec/se.h"
+#include "../utils/aarch64_util.h"
+
+extern gfx_con_t gfx_con;

 #define _NOPv7() 0xE320F000

@@ -68,10 +71,18 @@ PATCHSET_DEF(_secmon_5_patchset,

 PATCHSET_DEF(_secmon_6_patchset,
 	// Patch package2 decryption and signature/hash checks.
-	{ 0xDC8 + 0x820, _NOP() }, //package2 structure.
-	{ 0xDC8 + 0x82C, _NOP() }, //Version.
-	{ 0xDC8 + 0xE90, _NOP() }, //Header signature.
-	{ 0xDC8 + 0x112C, _NOP() } //Sections SHA2.
+	{ 0xDC8 + 0x820, _NOP() },  //package2 structure.
+	{ 0xDC8 + 0x82C, _NOP() },  //Version.
+	{ 0xDC8 + 0xE90, _NOP() },  //Header signature.
+	{ 0xDC8 + 0x112C, _NOP() }, //Sections SHA2.
+	// Fix sleep mode for debug.
+	{ 0x1A68 + 0x3854, 0x94000E45 }, //gpio_config_for_uart.
+	{ 0x1A68 + 0x3858, 0x97FFFC0F }, //clkrst_reboot_uarta.
+	{ 0x1A68 + 0x385C, 0x52A00021 }, //MOV W1, #0x10000 ; baudrate.
+	{ 0x1A68 + 0x3860, 0x2A1F03E0 }, //MOV W0, WZR ; uart_port -> A.
+	{ 0x1A68 + 0x3864, 0x72984001 }, //MOVK W1, #0xC200 ; baudrate.
+	{ 0x1A68 + 0x3868, 0x94000C8C }, //uart_configure.
+	{ 0x1A68 + 0x3A6C, _NOP() }      // warmboot UARTA cfg.
 );

 PATCHSET_DEF(_secmon_620_patchset,
@@ -79,7 +90,15 @@ PATCHSET_DEF(_secmon_620_patchset,
 	{ 0xDC8 + 0x604, _NOP() }, //package2 structure.
 	{ 0xDC8 + 0x610, _NOP() }, //Version.
 	{ 0xDC8 + 0xC74, _NOP() }, //Header signature.
-	{ 0xDC8 + 0xF10, _NOP() }  //Sections SHA2.
+	{ 0xDC8 + 0xF10, _NOP() }, //Sections SHA2.
+	// Fix sleep mode for debug.
+	{ 0x2AC8 + 0x3854, 0x94000F42 }, //gpio_config_for_uart.
+	{ 0x2AC8 + 0x3858, 0x97FFFC0F }, //clkrst_reboot_uarta.
+	{ 0x2AC8 + 0x385C, 0x52A00021 }, //MOV W1, #0x10000 ; baudrate.
+	{ 0x2AC8 + 0x3860, 0x2A1F03E0 }, //MOV W0, WZR ; uart_port -> A.
+	{ 0x2AC8 + 0x3864, 0x72984001 }, //MOVK W1, #0xC200 ; baudrate.
+	{ 0x2AC8 + 0x3868, 0x94000D89 }, //uart_configure.
+	{ 0x2AC8 + 0x3A6C, _NOP() }      // warmboot UARTA cfg.
 );

 PATCHSET_DEF(_warmboot_1_patchset,
@@ -100,20 +119,6 @@ PATCHSET_DEF(_warmboot_4_patchset,
 	{ 0x558, _NOPv7() }  // Segment id check.
 );

-PATCHSET_DEF(_warmboot_5_patchset,
-	{ 0x544, _NOPv7() }, // Fuse check.
-	{ 0x558, _NOPv7() }  // Segment id check.
-);
-
-PATCHSET_DEF(_warmboot_6_patchset,
-	{ 0x544, _NOPv7() }, // Fuse check.
-	{ 0x558, _NOPv7() }  // Segment id check.
-);
-
-PATCHSET_DEF(_warmboot_620_patchset,
-	{ 0x544, _NOPv7() }, // Fuse check.
-	{ 0x558, _NOPv7() }  // Segment id check.
-);

 /*
 * package1.1 header: <wb, ldr, sm>
@@ -126,23 +131,30 @@ PATCHSET_DEF(_warmboot_620_patchset,
 * 5.0: {ldr, sm, wb} { 1, 2, 0 }
 * 6.0: {ldr, sm, wb} { 1, 2, 0 }
 * 6.2: {ldr, sm, wb} { 1, 2, 0 }
+ * 7.0: {ldr, sm, wb} { 1, 2, 0 }
 */

 static const pkg1_id_t _pkg1_ids[] = {
-	{ "20161121183008", 0, 0x1900, 0x3FE0, { 2, 1, 0 }, SM_100_ADR, 0x8000D000, true,  _secmon_1_patchset, _warmboot_1_patchset },     //1.0.0 (Patched relocator)
-	{ "20170210155124", 0, 0x1900, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_2_patchset, _warmboot_2_patchset },     //2.0.0 - 2.3.0
-	{ "20170519101410", 1, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },     //3.0.0
-	{ "20170710161758", 2, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },     //3.0.1 - 3.0.2
-	{ "20170921172629", 3, 0x1800, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_4_patchset, _warmboot_4_patchset },     //4.0.0 - 4.1.0
-	{ "20180220163747", 4, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_5_patchset, _warmboot_5_patchset },     //5.0.0 - 5.1.0
-	{ "20180802162753", 5, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_6_patchset, _warmboot_6_patchset },     //6.0.0 - 6.1.0
-	{ "20181107105733", 6, 0x0E00, 0x6FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_620_patchset, _warmboot_620_patchset }, //6.2.0
+	{ "20161121183008", 0, 0x1900, 0x3FE0, { 2, 1, 0 }, SM_100_ADR, 0x8000D000, true,  _secmon_1_patchset, _warmboot_1_patchset },   //1.0.0 (Patched relocator)
+	{ "20170210155124", 0, 0x1900, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_2_patchset, _warmboot_2_patchset },   //2.0.0 - 2.3.0
+	{ "20170519101410", 1, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },   //3.0.0
+	{ "20170710161758", 2, 0x1A00, 0x3FE0, { 0, 1, 2 }, 0x4002D000, 0x8000D000, true,  _secmon_3_patchset, _warmboot_3_patchset },   //3.0.1 - 3.0.2
+	{ "20170921172629", 3, 0x1800, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_4_patchset, _warmboot_4_patchset },   //4.0.0 - 4.1.0
+	{ "20180220163747", 4, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003B000, false, _secmon_5_patchset, _warmboot_4_patchset },   //5.0.0 - 5.1.0
+	{ "20180802162753", 5, 0x1900, 0x3FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_6_patchset, _warmboot_4_patchset },   //6.0.0 - 6.1.0
+	{ "20181107105733", 6, 0x0E00, 0x6FE0, { 1, 2, 0 }, 0x4002B000, 0x4003D800, false, _secmon_620_patchset, _warmboot_4_patchset }, //6.2.0
+	{ "20181218175730", 7, 0x0F00, 0x6FE0, { 1, 2, 0 }, 0x40030000, 0x4003E000, false, NULL, _warmboot_4_patchset },                 //7.0.0
+	{ "20190208150037", 7, 0x0F00, 0x6FE0, { 1, 2, 0 }, 0x40030000, 0x4003E000, false, NULL, _warmboot_4_patchset },                 //7.0.1
 	{ NULL } //End.
 };

-
 const pkg1_id_t *pkg1_identify(u8 *pkg1)
 {
+	char build_date[15];
+	memcpy(build_date, (char *)(pkg1 + 0x10), 14);
+	build_date[14] = 0;
+	gfx_printf(&gfx_con, "Found pkg1 ('%s').\n\n", build_date);
+
 	for (u32 i = 0; _pkg1_ids[i].id; i++)
 		if (!memcmp(pkg1 + 0x10, _pkg1_ids[i].id, 12))
 			return &_pkg1_ids[i];
--- a/bootloader/hos/pkg2.c
+++ b/bootloader/hos/pkg2.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 * Copyright (c) 2018 Atmosphère-NX
 *
 * This program is free software; you can redistribute it and/or modify it
@@ -26,6 +26,9 @@

 #include "../gfx/gfx.h"

+#pragma GCC push_options
+#pragma GCC optimize ("Os")
+
 extern gfx_con_t gfx_con;

 /*#include "util.h"
@@ -44,6 +47,7 @@ extern gfx_con_t gfx_con;
 #define FREE_CODE_OFF_1ST_400 0x52890
 #define FREE_CODE_OFF_1ST_500 0x5C020
 #define FREE_CODE_OFF_1ST_600 0x5EE00
+#define FREE_CODE_OFF_1ST_700 0x5FEC0

 #define ID_SND_OFF_100 0x23CC0
 #define ID_SND_OFF_200 0x3F134
@@ -52,6 +56,7 @@ extern gfx_con_t gfx_con;
 #define ID_SND_OFF_400 0x2AF64
 #define ID_SND_OFF_500 0x2AD34
 #define ID_SND_OFF_600 0x2BB8C
+#define ID_SND_OFF_700 0x2D044

 #define ID_RCV_OFF_100 0x219F0
 #define ID_RCV_OFF_200 0x3D1A8
@@ -60,13 +65,14 @@ extern gfx_con_t gfx_con;
 #define ID_RCV_OFF_400 0x28F6C
 #define ID_RCV_OFF_500 0x28DAC
 #define ID_RCV_OFF_600 0x29B6C
+#define ID_RCV_OFF_700 0x2B23C

 static u32 PRC_ID_SND_100[] =
 {
 	0xA9BF2FEA, 0x2A0E03EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9412948,	0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_100 (FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100) + 4)
+#define FREE_CODE_OFF_2ND_100 (FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100) + sizeof(u32))
 static u32 PRC_ID_RCV_100[] =
 {
 	0xA9BF2FEA, 0x2A1C03EA, 0xD37EF54A, 0xF86A69AA, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A,
@@ -78,7 +84,7 @@ static u32 PRC_ID_SND_200[] =
 	0xA9BF2FEA, 0x2A1803EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9413148, 0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_200 (FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200) + 4)
+#define FREE_CODE_OFF_2ND_200 (FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200) + sizeof(u32))
 static u32 PRC_ID_RCV_200[] =
 {
 	0xA9BF2FEA, 0x2A0F03EA, 0xD37EF54A, 0xF9405FEB, 0xF86A696A, 0xF9407BEB, 0x92FFFFE9, 0x8A090148,
@@ -90,7 +96,7 @@ static u32 PRC_ID_SND_300[] =
 	0xA9BF2FEA, 0x2A1803EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9415548, 0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_300 (FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300) + 4)
+#define FREE_CODE_OFF_2ND_300 (FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300) + sizeof(u32))
 static u32 PRC_ID_RCV_300[] =
 {
 	0xA9BF2FEA, 0x2A0F03EA, 0xD37EF54A, 0xF9405FEB, 0xF86A696A, 0xF9407BEB, 0x92FFFFE9, 0x8A090148,
@@ -102,7 +108,7 @@ static u32 PRC_ID_SND_302[] =
 	0xA9BF2FEA, 0x2A1803EB, 0xD37EF56B, 0xF86B6B8B, 0x92FFFFE9, 0x8A090168, 0xD2FFFFE9, 0x8A09016B,
 	0xD2FFFFC9, 0xEB09017F, 0x54000040, 0xF9415548, 0xA8C12FEA
 };
-#define FREE_CODE_OFF_2ND_302 (FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302) + 4)
+#define FREE_CODE_OFF_2ND_302 (FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302) + sizeof(u32))
 static u32 PRC_ID_RCV_302[] =
 {
 	0xA9BF2FEA, 0x2A0F03EA, 0xD37EF54A, 0xF9405FEB, 0xF86A696A, 0xF9407BEB, 0x92FFFFE9, 0x8A090148,
@@ -114,7 +120,7 @@ static u32 PRC_ID_SND_400[] =
 	0x2A1703EA, 0xD37EF54A, 0xF86A6B8A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A, 0xD2FFFFC9,
 	0xEB09015F, 0x54000060, 0xF94053EA, 0xF9415948, 0xF94053EA
 };
-#define FREE_CODE_OFF_2ND_400 (FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400) + 4)
+#define FREE_CODE_OFF_2ND_400 (FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400) + sizeof(u32))
 static u32 PRC_ID_RCV_400[] =
 {
 	0xF9403BED, 0x2A0E03EA, 0xD37EF54A, 0xF86A69AA, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A,
@@ -126,7 +132,7 @@ static u32 PRC_ID_SND_500[] =
 	0x2A1703EA, 0xD37EF54A, 0xF86A6B6A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A, 0xD2FFFFC9,
 	0xEB09015F, 0x54000060, 0xF94043EA, 0xF9415948, 0xF94043EA
 };
-#define FREE_CODE_OFF_2ND_500 (FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500) + 4)
+#define FREE_CODE_OFF_2ND_500 (FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500) + sizeof(u32))
 static u32 PRC_ID_RCV_500[] =
 {
 	0xF9403BED, 0x2A1503EA, 0xD37EF54A, 0xF86A69AA, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9, 0x8A09014A,
@@ -139,7 +145,7 @@ static u32 PRC_ID_SND_600[] =
 	0x8A09014A, 0xD2FFFFC9, 0xEB09015F, 0x54000100, 0xA9BF27E8, 0xF9400308, 0xF9401D08, 0xAA1803E0,
 	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
 };
-#define FREE_CODE_OFF_2ND_600 (FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600) + 4)
+#define FREE_CODE_OFF_2ND_600 (FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600) + sizeof(u32))
 static u32 PRC_ID_RCV_600[] =
 {
 	0xA9BF2FEA, 0xF94043EB, 0x2A1503EA, 0xD37EF54A, 0xF86A696A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9,
@@ -147,6 +153,20 @@ static u32 PRC_ID_RCV_600[] =
 	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
 };

+static u32 PRC_ID_SND_700[] =
+{
+	0xA9BF2FEA, 0xF9403BEB, 0x2A1903EA, 0xD37EF54A, 0xF86A696A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9,
+	0x8A09014A, 0xD2FFFFC9, 0xEB09015F, 0x54000100, 0xA9BF27E8, 0xF94002A8, 0xF9401D08, 0xAA1503E0,
+	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
+};
+#define FREE_CODE_OFF_2ND_700 (FREE_CODE_OFF_1ST_700 + sizeof(PRC_ID_SND_700) + sizeof(u32))
+static u32 PRC_ID_RCV_700[] =
+{
+	0xA9BF2FEA, 0xF9404FEB, 0x2A1603EA, 0xD37EF54A, 0xF86A696A, 0x92FFFFE9, 0x8A090148, 0xD2FFFFE9,
+	0x8A09014A, 0xD2FFFFC9, 0xEB09015F, 0x54000100, 0xA9BF27E8, 0xF9400368, 0xF9401D08, 0xAA1B03E0,
+	0xD63F0100, 0xA8C127E8, 0xAA0003E8, 0xA8C12FEA, 0xAA0803E0
+};
+
 // Include kernel patches here, so we can utilize pkg1 id
 KERNEL_PATCHSET_DEF(_kernel_1_patchset,
 	{ SVC_VERIFY_DS, 0x3764C, _NOP(), NULL },          // Disable SVC verifications
@@ -155,11 +175,11 @@ KERNEL_PATCHSET_DEF(_kernel_1_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_100, _B(ID_SND_OFF_100, FREE_CODE_OFF_1ST_100), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_100, sizeof(PRC_ID_SND_100) >> 2, PRC_ID_SND_100}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100), ID_SND_OFF_100 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_100 + sizeof(PRC_ID_SND_100), ID_SND_OFF_100 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_100, _B(ID_RCV_OFF_100, FREE_CODE_OFF_2ND_100), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_100, sizeof(PRC_ID_RCV_100) >> 2, PRC_ID_RCV_100}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_100 + sizeof(PRC_ID_RCV_100),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_100 + sizeof(PRC_ID_RCV_100), ID_RCV_OFF_100 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_100 + sizeof(PRC_ID_RCV_100), ID_RCV_OFF_100 + sizeof(u32)), NULL}
 );

 KERNEL_PATCHSET_DEF(_kernel_2_patchset,
@@ -169,11 +189,11 @@ KERNEL_PATCHSET_DEF(_kernel_2_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_200, _B(ID_SND_OFF_200, FREE_CODE_OFF_1ST_200), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_200, sizeof(PRC_ID_SND_200) >> 2, PRC_ID_SND_200}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200), ID_SND_OFF_200 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_200 + sizeof(PRC_ID_SND_200), ID_SND_OFF_200 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_200, _B(ID_RCV_OFF_200, FREE_CODE_OFF_2ND_200), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_200, sizeof(PRC_ID_RCV_200) >> 2, PRC_ID_RCV_200}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_200 + sizeof(PRC_ID_RCV_200),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_200 + sizeof(PRC_ID_RCV_200), ID_RCV_OFF_200 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_200 + sizeof(PRC_ID_RCV_200), ID_RCV_OFF_200 + sizeof(u32)), NULL}
 );

 KERNEL_PATCHSET_DEF(_kernel_3_patchset,
@@ -183,11 +203,11 @@ KERNEL_PATCHSET_DEF(_kernel_3_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_300, _B(ID_SND_OFF_300, FREE_CODE_OFF_1ST_300), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_300, sizeof(PRC_ID_SND_300) >> 2, PRC_ID_SND_300}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300), ID_SND_OFF_300 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_300 + sizeof(PRC_ID_SND_300), ID_SND_OFF_300 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_300, _B(ID_RCV_OFF_300, FREE_CODE_OFF_2ND_300), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_300, sizeof(PRC_ID_RCV_300) >> 2, PRC_ID_RCV_300}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_300 + sizeof(PRC_ID_RCV_300),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_300 + sizeof(PRC_ID_RCV_300), ID_RCV_OFF_300 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_300 + sizeof(PRC_ID_RCV_300), ID_RCV_OFF_300 + sizeof(u32)), NULL}
 );

 KERNEL_PATCHSET_DEF(_kernel_302_patchset,
@@ -197,11 +217,11 @@ KERNEL_PATCHSET_DEF(_kernel_302_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_302, _B(ID_SND_OFF_302, FREE_CODE_OFF_1ST_302), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_302, sizeof(PRC_ID_SND_302) >> 2, PRC_ID_SND_302}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302), ID_SND_OFF_302 + 4), NULL},
+		_B(FREE_CODE_OFF_1ST_302 + sizeof(PRC_ID_SND_302), ID_SND_OFF_302 + sizeof(u32)), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_302, _B(ID_RCV_OFF_302, FREE_CODE_OFF_2ND_302), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_302, sizeof(PRC_ID_RCV_302) >> 2, PRC_ID_RCV_302}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_302 + sizeof(PRC_ID_RCV_302),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_302 + sizeof(PRC_ID_RCV_302), ID_RCV_OFF_302 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_302 + sizeof(PRC_ID_RCV_302), ID_RCV_OFF_302 + sizeof(u32)), NULL}
 );

 KERNEL_PATCHSET_DEF(_kernel_4_patchset,
@@ -211,39 +231,56 @@ KERNEL_PATCHSET_DEF(_kernel_4_patchset,
 	{ ATM_GEN_PATCH, ID_SND_OFF_400, _B(ID_SND_OFF_400, FREE_CODE_OFF_1ST_400), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_400, sizeof(PRC_ID_SND_400) >> 2, PRC_ID_SND_400}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400),                      // Branch back and skip 2 instructions.
-		_B(FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400), ID_SND_OFF_400 + 8), NULL},
+		_B(FREE_CODE_OFF_1ST_400 + sizeof(PRC_ID_SND_400), ID_SND_OFF_400 + sizeof(u32) * 2), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_400, _B(ID_RCV_OFF_400, FREE_CODE_OFF_2ND_400), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_400, sizeof(PRC_ID_RCV_400) >> 2, PRC_ID_RCV_400}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_400 + sizeof(PRC_ID_RCV_400),                      // Branch back and skip 1 instruction.
-		_B(FREE_CODE_OFF_2ND_400 + sizeof(PRC_ID_RCV_400), ID_RCV_OFF_400 + 4), NULL}
+		_B(FREE_CODE_OFF_2ND_400 + sizeof(PRC_ID_RCV_400), ID_RCV_OFF_400 + sizeof(u32)), NULL}
 );

 KERNEL_PATCHSET_DEF(_kernel_5_patchset,
+	{ SVC_GENERIC,   0x38C2C, _NOP(), NULL },          // Allow same process on svcControlCodeMemory.
 	{ SVC_VERIFY_DS, 0x45E6C, _NOP(), NULL },          // Disable SVC verifications
 	{ DEBUG_MODE_EN, 0x5513C, _MOVZX(8, 1, 0), NULL }, // Enable Debug Patch
 	// Atmosphère kernel patches.
 	{ ATM_GEN_PATCH, ID_SND_OFF_500, _B(ID_SND_OFF_500, FREE_CODE_OFF_1ST_500), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_500, sizeof(PRC_ID_SND_500) >> 2, PRC_ID_SND_500}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500),                      // Branch back and skip 2 instructions.
-		_B(FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500), ID_SND_OFF_500 + 8), NULL},
+		_B(FREE_CODE_OFF_1ST_500 + sizeof(PRC_ID_SND_500), ID_SND_OFF_500 + sizeof(u32) * 2), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_500, _B(ID_RCV_OFF_500, FREE_CODE_OFF_2ND_500), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_500, sizeof(PRC_ID_RCV_500) >> 2, PRC_ID_RCV_500}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_500 + sizeof(PRC_ID_RCV_500),                      // Branch back and skip 2 instructions.
-		_B(FREE_CODE_OFF_2ND_500 + sizeof(PRC_ID_RCV_500), ID_RCV_OFF_500 + 8), NULL}
+		_B(FREE_CODE_OFF_2ND_500 + sizeof(PRC_ID_RCV_500), ID_RCV_OFF_500 + sizeof(u32) * 2), NULL}
 );

 KERNEL_PATCHSET_DEF(_kernel_6_patchset,
+	{ SVC_GENERIC,   0x3A8CC, _NOP(), NULL },          // Allow same process on svcControlCodeMemory.
 	{ SVC_VERIFY_DS, 0x47EA0, _NOP(), NULL },          // Disable SVC verifications
 	{ DEBUG_MODE_EN, 0x57548, _MOVZX(8, 1, 0), NULL }, // Enable Debug Patch
 	// Atmosphère kernel patches.
 	{ ATM_GEN_PATCH, ID_SND_OFF_600, _B(ID_SND_OFF_600, FREE_CODE_OFF_1ST_600), NULL},    // Send process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_600, sizeof(PRC_ID_SND_600) >> 2, PRC_ID_SND_600}, // Send process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600),                      // Branch back and skip 4 instructions.
-		_B(FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600), ID_SND_OFF_600 + 0x10), NULL},
+		_B(FREE_CODE_OFF_1ST_600 + sizeof(PRC_ID_SND_600), ID_SND_OFF_600 + sizeof(u32) * 4), NULL},
 	{ ATM_GEN_PATCH, ID_RCV_OFF_600, _B(ID_RCV_OFF_600, FREE_CODE_OFF_2ND_600), NULL},    // Receive process id branch.
 	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_600, sizeof(PRC_ID_RCV_600) >> 2, PRC_ID_RCV_600}, // Receive process id code.
 	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_600 + sizeof(PRC_ID_RCV_600),                      // Branch back and skip 4 instructions.
-		_B(FREE_CODE_OFF_2ND_600 + sizeof(PRC_ID_RCV_600), ID_RCV_OFF_600 + 0x10), NULL}
+		_B(FREE_CODE_OFF_2ND_600 + sizeof(PRC_ID_RCV_600), ID_RCV_OFF_600 + sizeof(u32) * 4), NULL}
+);
+
+KERNEL_PATCHSET_DEF(_kernel_7_patchset,
+	{ SVC_GENERIC,   0x3C6E0, _NOP(), NULL },          // Allow same process on svcControlCodeMemory.
+	{ SVC_VERIFY_DS, 0x49E5C, _NOP(), NULL },          // Disable SVC verifications
+	{ DEBUG_MODE_EN, 0x581B0, _MOVZX(8, 1, 0), NULL }, // Enable Debug Patch
+	// Atmosphère kernel patches.
+	{ ATM_GEN_PATCH, ID_SND_OFF_700, _B(ID_SND_OFF_700, FREE_CODE_OFF_1ST_700), NULL},    // Send process id branch.
+	{ ATM_ARR_PATCH, FREE_CODE_OFF_1ST_700, sizeof(PRC_ID_SND_700) >> 2, PRC_ID_SND_700}, // Send process id code.
+	{ ATM_GEN_PATCH, FREE_CODE_OFF_1ST_700 + sizeof(PRC_ID_SND_700),                      // Branch back and skip 4 instructions.
+		_B(FREE_CODE_OFF_1ST_700 + sizeof(PRC_ID_SND_700), ID_SND_OFF_700 + sizeof(u32) * 4), NULL},
+	{ ATM_GEN_PATCH, ID_RCV_OFF_700, _B(ID_RCV_OFF_700, FREE_CODE_OFF_2ND_700), NULL},    // Receive process id branch.
+	{ ATM_ARR_PATCH, FREE_CODE_OFF_2ND_700, sizeof(PRC_ID_RCV_700) >> 2, PRC_ID_RCV_700}, // Receive process id code.
+	{ ATM_GEN_PATCH, FREE_CODE_OFF_2ND_700 + sizeof(PRC_ID_RCV_700),                      // Branch back and skip 4 instructions.
+		_B(FREE_CODE_OFF_2ND_700 + sizeof(PRC_ID_RCV_700), ID_RCV_OFF_700 + sizeof(u32) * 4), NULL}
 );

 static const pkg2_kernel_id_t _pkg2_kernel_ids[] =
@@ -255,6 +292,7 @@ static const pkg2_kernel_id_t _pkg2_kernel_ids[] =
 	{ 0x485d0157, _kernel_4_patchset },   //4.0.0 - 4.1.0
 	{ 0xf3c363f2, _kernel_5_patchset },   //5.0.0 - 5.1.0
 	{ 0x64ce1a44, _kernel_6_patchset },   //6.0.0 - 6.2.0
+	{ 0x908175e1, _kernel_7_patchset },   //7.0.0
 	{ 0, 0 }                              //End.
 };

@@ -275,195 +313,238 @@ enum kip_offset_section
 #define GET_KIP_PATCH_OFFSET(x) (x & KIP_PATCH_OFFSET_MASK)
 #define KPS(x) ((u32)(x) << KIP_PATCH_SECTION_SHIFT)

-static kip1_patch_t _fs_nosigchk_100[] = 
+static kip1_patch_t _fs_nosigchk_100[] =
 {
 	{ KPS(KIP_TEXT) | 0x194A0, 4, "\xBA\x09\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x3A79C, 4, "\xE0\x06\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_100[] = 
+static kip1_patchset_t _fs_patches_100[] =
 {
 	{ "nosigchk", _fs_nosigchk_100 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_200[] = 
+static kip1_patch_t _fs_nosigchk_200[] =
 {
 	{ KPS(KIP_TEXT) | 0x15DF4, 4, "\xBC\x0A\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x3F720, 4, "\x00\x06\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_200[] = 
+static kip1_patchset_t _fs_patches_200[] =
 {
 	{ "nosigchk", _fs_nosigchk_200 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_210[] = 
+static kip1_patch_t _fs_nosigchk_210[] =
 {
 	{ KPS(KIP_TEXT) | 0x15F64, 4, "\xDF\x0A\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x3FAF8, 4, "\x00\x06\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_210[] = 
+static kip1_patchset_t _fs_patches_210[] =
 {
 	{ "nosigchk", _fs_nosigchk_210 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_300[] = 
+static kip1_patch_t _fs_nosigchk_300[] =
 {
 	{ KPS(KIP_TEXT) | 0x18E24, 4, "\x52\x0C\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x49EC8, 4, "\x40\x04\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_300[] = 
+static kip1_patchset_t _fs_patches_300[] =
 {
 	{ "nosigchk", _fs_nosigchk_300 },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_30x[] = 
+static kip1_patch_t _fs_nosigchk_30x[] =
 {
 	{ KPS(KIP_TEXT) | 0x18E90, 4, "\x52\x0C\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x49F34, 4, "\xE0\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_30x[] = 
+static kip1_patchset_t _fs_patches_30x[] =
 {
 	{ "nosigchk", _fs_nosigchk_30x },
 	{ "nogc",     NULL },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_4xx[] = 
+static kip1_patch_t _fs_nosigchk_4xx[] =
 {
 	{ KPS(KIP_TEXT) | 0x1C4FC, 4, "\x3C\x2F\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x57934, 4, "\xE0\x02\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patch_t _fs_nogc_40x[] = 
+static kip1_patch_t _fs_nogc_40x[] =
 {
 	{ KPS(KIP_TEXT) | 0xA3458, 4, "\x14\x40\x80\x72", "\x14\x80\x80\x72" },
 	{ KPS(KIP_TEXT) | 0xAAB44, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_40x[] = 
+static kip1_patchset_t _fs_patches_40x[] =
 {
 	{ "nosigchk", _fs_nosigchk_4xx },
 	{ "nogc",     _fs_nogc_40x },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nogc_410[] = 
+static kip1_patch_t _fs_nogc_410[] =
 {
 	{ KPS(KIP_TEXT) | 0xA34BC, 4, "\x14\x40\x80\x72", "\x14\x80\x80\x72" },
 	{ KPS(KIP_TEXT) | 0xAABA8, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_410[] = 
+static kip1_patchset_t _fs_patches_410[] =
 {
 	{ "nosigchk", _fs_nosigchk_4xx },
 	{ "nogc",     _fs_nogc_410 },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_50x[] = 
+static kip1_patch_t _fs_nosigchk_50x[] =
 {
 	{ KPS(KIP_TEXT) | 0x22DDC, 4, "\x7D\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x7D490, 4, "\x40\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patch_t _fs_nogc_50x[] = 
+static kip1_patch_t _fs_nogc_50x[] =
 {
 	{ KPS(KIP_TEXT) | 0xCF3C4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ KPS(KIP_TEXT) | 0xD73A0, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_50x[] = 
+static kip1_patchset_t _fs_patches_50x[] =
 {
 	{ "nosigchk", _fs_nosigchk_50x },
 	{ "nogc",     _fs_nogc_50x },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_510[] = 
+static kip1_patch_t _fs_nosigchk_510[] =
 {
 	{ KPS(KIP_TEXT) | 0x22E0C, 4, "\x85\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0x7D860, 4, "\x40\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patch_t _fs_nogc_510[] = 
+static kip1_patch_t _fs_nogc_510[] =
 {
 	{ KPS(KIP_TEXT) | 0xCF794, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ KPS(KIP_TEXT) | 0xD7770, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_510[] = 
+static kip1_patchset_t _fs_patches_510[] =
 {
 	{ "nosigchk", _fs_nosigchk_510 },
 	{ "nogc",     _fs_nogc_510 },
 	{ NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_600[] = 
+static kip1_patch_t _fs_nosigchk_600[] =
 {
 	{ KPS(KIP_TEXT) | 0x712A8, 4, "\x8E\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0xEB08C, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patch_t _fs_nosigchk_600_exfat[] = 
+static kip1_patch_t _fs_nosigchk_600_exfat[] =
 {
 	{ KPS(KIP_TEXT) | 0x7C9A8, 4, "\x8E\x3E\x00\x94", "\xE0\x03\x1F\x2A" },
 	{ KPS(KIP_TEXT) | 0xF678C, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patch_t _fs_nogc_600[] = 
+static kip1_patch_t _fs_nogc_600[] =
 {
 	{ KPS(KIP_TEXT) | 0x12CC20, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ KPS(KIP_TEXT) | 0x1538F4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patch_t _fs_nogc_600_exfat[] = 
+static kip1_patch_t _fs_nogc_600_exfat[] =
 {
 	{ KPS(KIP_TEXT) | 0x138320, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
 	{ KPS(KIP_TEXT) | 0x15EFF4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
 	{ 0, 0, NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_600[] = 
+static kip1_patchset_t _fs_patches_600[] =
 {
 	{ "nosigchk", _fs_nosigchk_600 },
 	{ "nogc",     _fs_nogc_600 },
 	{ NULL, NULL }
 };

-static kip1_patchset_t _fs_patches_600_exfat[] = 
+static kip1_patchset_t _fs_patches_600_exfat[] =
 {
 	{ "nosigchk", _fs_nosigchk_600_exfat },
 	{ "nogc",     _fs_nogc_600_exfat },
 	{ NULL, NULL }
 };

+static kip1_patch_t _fs_nosigchk_700[] =
+{
+	{ KPS(KIP_TEXT) | 0x74A2C, 4, "\x31\x43\x00\x94", "\xE0\x03\x1F\x2A" },
+	{ KPS(KIP_TEXT) | 0xF25E4, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patch_t _fs_nosigchk_700_exfat[] =
+{
+	{ KPS(KIP_TEXT) | 0x7FFDC, 4, "\x31\x43\x00\x94", "\xE0\x03\x1F\x2A" },
+	{ KPS(KIP_TEXT) | 0xFDB94, 4, "\xC0\x03\x00\x36", "\x1F\x20\x03\xD5" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patch_t _fs_nogc_700[] =
+{
+	{ KPS(KIP_TEXT) | 0x134160, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
+	{ KPS(KIP_TEXT) | 0x15BF04, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patch_t _fs_nogc_700_exfat[] =
+{
+	{ KPS(KIP_TEXT) | 0x13F710, 8, "\xF4\x4F\xBE\xA9\xFD\x7B\x01\xA9", "\xE0\x03\x1F\x2A\xC0\x03\x5F\xD6" },
+	{ KPS(KIP_TEXT) | 0x1674B4, 4, "\x14\x40\x80\x52", "\x14\x80\x80\x52" },
+	{ 0, 0, NULL, NULL }
+};
+
+static kip1_patchset_t _fs_patches_700[] =
+{
+	{ "nosigchk", _fs_nosigchk_700 },
+	{ "nogc",     _fs_nogc_700 },
+	{ NULL, NULL }
+};
+
+static kip1_patchset_t _fs_patches_700_exfat[] =
+{
+	{ "nosigchk", _fs_nosigchk_700_exfat },
+	{ "nogc",     _fs_nogc_700_exfat },
+	{ NULL, NULL }
+};
+
+// SHA256 hashes.
 static kip1_id_t _kip_ids[] = 
 {
 	{ "FS", "\xde\x9f\xdd\xa4\x08\x5d\xd5\xfe\x68\xdc\xb2\x0b\x41\x09\x5b\xb4", _fs_patches_100 },       // FS 1.0.0
@@ -487,7 +568,9 @@ static kip1_id_t _kip_ids[] =
 	{ "FS", "\x1b\x82\xcb\x22\x18\x67\xcb\x52\xc4\x4a\x86\x9e\xa9\x1a\x1a\xdd", _fs_patches_600 }, 		 // FS 6.0.0-4.0
 	{ "FS", "\x96\x6a\xdd\x3d\x20\xb6\x27\x13\x2c\x5a\x8d\xa4\x9a\xc9\xd8\xdd", _fs_patches_600_exfat }, // FS 6.0.0-4.0 exfat
 	{ "FS", "\x3a\x57\x4d\x43\x61\x86\x19\x1d\x17\x88\xeb\x2c\x0f\x07\x6b\x11", _fs_patches_600 }, 		 // FS 6.0.0-5.0
-	{ "FS", "\x33\x05\x53\xf6\xb5\xfb\x55\xc4\xc2\xd7\xb7\x36\x24\x02\x76\xb3", _fs_patches_600_exfat }  // FS 6.0.0-5.0 exfat
+	{ "FS", "\x33\x05\x53\xf6\xb5\xfb\x55\xc4\xc2\xd7\xb7\x36\x24\x02\x76\xb3", _fs_patches_600_exfat }, // FS 6.0.0-5.0 exfat
+	{ "FS", "\x2A\xDB\xE9\x7E\x9B\x5F\x41\x77\x9E\xC9\x5F\xFE\x26\x99\xC9\x33", _fs_patches_700 }, 		 // FS 7.0.0
+	{ "FS", "\x2C\xCE\x65\x9C\xEC\x53\x6A\x8E\x4D\x91\xF3\xBE\x4B\x74\xBE\xD3", _fs_patches_700_exfat }  // FS 7.0.0 exfat
 };

 const pkg2_kernel_id_t *pkg2_identify(u32 id)
@@ -571,7 +654,7 @@ int pkg2_decompress_kip(pkg2_kip1_info_t* ki, u32 sectsToDecomp)
 	memcpy(&hdr, ki->kip1, sizeof(hdr));
 	
 	unsigned int newKipSize = sizeof(hdr);
-	for (u32 sectIdx=0; sectIdx<KIP1_NUM_SECTIONS; sectIdx++)
+	for (u32 sectIdx = 0; sectIdx < KIP1_NUM_SECTIONS; sectIdx++)
 	{
 		u32 sectCompBit = 1u << sectIdx;
 		// For compressed, cant get actual decompressed size without doing it, so use safe "output size".
@@ -584,7 +667,7 @@ int pkg2_decompress_kip(pkg2_kip1_info_t* ki, u32 sectsToDecomp)
 	pkg2_kip1_t* newKip = malloc(newKipSize);	
 	unsigned char* dstDataPtr = newKip->data;
 	const unsigned char* srcDataPtr = ki->kip1->data;
-	for (u32 sectIdx=0; sectIdx<KIP1_NUM_SECTIONS; sectIdx++)
+	for (u32 sectIdx = 0; sectIdx < KIP1_NUM_SECTIONS; sectIdx++)
 	{
 		u32 sectCompBit = 1u << sectIdx;
 		// Easy copy path for uncompressed or ones we dont want to uncompress.
@@ -638,7 +721,7 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 	static const u32 MAX_NUM_PATCHES_REQUESTED = sizeof(u32)*8;
 	char* patches[MAX_NUM_PATCHES_REQUESTED];

-	u32 numPatches=1;
+	u32 numPatches = 1;
 	patches[0] = patchNames;
 	{
 		for (char* p = patchNames; *p != 0; p++)
@@ -646,7 +729,7 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 			if (*p == ',')
 			{
 				*p = 0;
-				patches[numPatches++] = p+1;
+				patches[numPatches++] = p + 1;
 				if (numPatches >= MAX_NUM_PATCHES_REQUESTED)
 					return "too_many_patches";
 			}
@@ -656,10 +739,10 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 	}

 	u32 patchesApplied = 0; // Bitset over patches.
-	for (u32 i=0; i<numPatches; i++)
+	for (u32 i = 0; i < numPatches; i++)
 	{
 		// Eliminate leading spaces.
-		for (const char* p=patches[i]; *p!=0; p++)
+		for (const char* p = patches[i]; *p != 0; p++)
 		{
 			if (*p == ' ' || *p == '\t' || *p == '\r' || *p == '\n')
 				patches[i]++;
@@ -671,7 +754,7 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 			continue;

 		// Eliminate trailing spaces.
-		for (int chIdx=valueLen-1; chIdx>=0; chIdx--)
+		for (int chIdx=valueLen - 1; chIdx >= 0; chIdx--)
 		{
 			const char* p = patches[i] + chIdx;
 			if (*p == ' ' || *p == '\t' || *p == '\r' || *p == '\n')
@@ -684,11 +767,11 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 		DPRINTF("Requested patch: '%s'\n", patches[i]);
 	}

-	u32 shaBuf[32/sizeof(u32)];
+	u32 shaBuf[32 / sizeof(u32)];
 	LIST_FOREACH_ENTRY(pkg2_kip1_info_t, ki, info, link)
 	{
 		shaBuf[0] = 0; // sha256 for this kip not yet calculated.
-		for (u32 currKipIdx=0; currKipIdx<(sizeof(_kip_ids)/sizeof(_kip_ids[0])); currKipIdx++)
+		for (u32 currKipIdx = 0; currKipIdx < (sizeof(_kip_ids) / sizeof(_kip_ids[0])); currKipIdx++)
 		{
 			if (strncmp((const char*)ki->kip1->name, _kip_ids[currKipIdx].name, sizeof(ki->kip1->name)) != 0)
 				continue;
@@ -697,7 +780,7 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 			kip1_patchset_t* currPatchset = _kip_ids[currKipIdx].patchset;
 			while (currPatchset != NULL && currPatchset->name != NULL)
 			{
-				for (u32 i=0; i<numPatches; i++)
+				for (u32 i = 0; i < numPatches; i++)
 				{
 					if (strcmp(currPatchset->name, patches[i]) != 0)
 					{
@@ -728,7 +811,7 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 			{
 				if (currPatchset->patches != NULL)
 				{
-					for (u32 currEnabIdx=0; currEnabIdx<numPatches; currEnabIdx++)
+					for (u32 currEnabIdx = 0; currEnabIdx < numPatches; currEnabIdx++)
 					{
 						if (strcmp(currPatchset->name, patches[currEnabIdx]))
 							continue;
@@ -752,13 +835,13 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 			if (!se_calc_sha256(shaBuf, ki->kip1, ki->size))
 				memset(shaBuf, 0, sizeof(shaBuf));

-			DPRINTF("%dms %s KIP1 size %d hash %08X\n", (postDecompTime-preDecompTime)/1000, ki->kip1->name, (int)ki->size, __builtin_bswap32(shaBuf[0]));
+			DPRINTF("%dms %s KIP1 size %d hash %08X\n", (postDecompTime-preDecompTime) / 1000, ki->kip1->name, (int)ki->size, __builtin_bswap32(shaBuf[0]));
 #endif

 			currPatchset = _kip_ids[currKipIdx].patchset;
 			while (currPatchset != NULL && currPatchset->name != NULL)
 			{
-				for (u32 currEnabIdx=0; currEnabIdx<numPatches; currEnabIdx++)
+				for (u32 currEnabIdx = 0; currEnabIdx < numPatches; currEnabIdx++)
 				{
 					if (strcmp(currPatchset->name, patches[currEnabIdx]))
 						continue;
@@ -772,7 +855,7 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 					}

 					unsigned char* kipSectData = ki->kip1->data;
-					for (u32 currSectIdx=0; currSectIdx<KIP1_NUM_SECTIONS; currSectIdx++)
+					for (u32 currSectIdx = 0; currSectIdx < KIP1_NUM_SECTIONS; currSectIdx++)
 					{
 						if (bitsAffected & (1u << currSectIdx))
 						{
@@ -806,7 +889,7 @@ const char* pkg2_patch_kips(link_t *info, char* patchNames)
 		}
 	}

-	for (u32 i=0; i<numPatches; i++)
+	for (u32 i = 0; i < numPatches; i++)
 	{
 		if ((patchesApplied & (1u << i)) == 0)
 			return patches[i];
@@ -900,3 +983,4 @@ DPRINTF("INI1 encrypted\n");
 	*(u32 *)hdr->ctr = 0x100 + sizeof(pkg2_hdr_t) + kernel_size + ini1_size;
 }

+#pragma GCC pop_options
--- a/bootloader/hos/pkg2.h
+++ b/bootloader/hos/pkg2.h
@@ -44,8 +44,10 @@ typedef struct _kernel_patch_t

 enum
 {
-	// Generic instruction patches
-	SVC_VERIFY_DS = 0x10, // 0x0-0xF are RESERVED.
+	// Always applied.
+	SVC_GENERIC   = 0,
+	// Generic instruction patches.
+	SVC_VERIFY_DS = 0x10,
 	DEBUG_MODE_EN,
 	ATM_GEN_PATCH,
 	// >4 bytes patches. Value is a pointer of a u32 array.
@@ -115,16 +117,16 @@ typedef struct _pkg2_kernel_id_t

 typedef struct _kip1_patch_t
 {
-	u32 offset; //section+offset of patch to apply
-	u32 length; //in bytes, 0 means last patch
-	const char* srcData; //that must match
-	const char* dstData; //that it gets replaced by
+	u32 offset; // section+offset of patch to apply.
+	u32 length; // In bytes, 0 means last patch.
+	const char* srcData; // That must match.
+	const char* dstData; // That it gets replaced by.
 } kip1_patch_t;

 typedef struct _kip1_patchset_t
 {
-	const char* name; //NULL means end
-	kip1_patch_t* patches; //NULL means not necessary
+	const char* name; // NULL means end.
+	kip1_patch_t* patches; // NULL means not necessary.
 } kip1_patchset_t;

 typedef struct _kip1_id_t
--- a/bootloader/hos/secmon_exo.c
+++ b/bootloader/hos/secmon_exo.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2018 CTCaer
+ * Copyright (C) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -17,25 +17,43 @@
 #include <string.h>

 #include "hos.h"
+#include "../mem/heap.h"
+#include "../storage/sdmmc.h"
 #include "../utils/types.h"

-// Exosphère mailbox defines.
-#define EXO_MAGIC_ADDR 0x40002E40
-#define  EXO_MAGIC_VAL     0x31434258
-#define EXO_FWNO_ADDR  0x40002E44
-#define EXO_FLAGS_ADDR 0x40002E48
-#define  EXO_FLAG_620_KGN  (1 << 0)
-#define  EXO_FLAG_DBG_PRIV (1 << 1)
-#define  EXO_FLAG_DBG_USER (1 << 2)
+typedef struct _exo_cfg_t
+{
+	vu32 magic;
+	vu32 fwno;
+	vu32 flags;
+	vu32 rsvd;
+} exo_cfg_t;

-void config_exosphere(const char *id, u32 kb, bool debug)
+typedef struct _atm_meta_t
+{
+	uint32_t magic;
+	uint32_t fwno;
+} wb_cfg_t;
+
+#define ATM_WB_HEADER_OFF 0x244
+#define  ATM_WB_MAGIC 0x30544257
+
+// Exosphère mailbox defines.
+#define EXO_CFG_DEPR_ADDR 0x40002E40 // Deprecated.
+#define EXO_CFG_ADDR      0x8000F000
+#define  EXO_MAGIC_DEPR_VAL 0x31434258
+#define  EXO_MAGIC_VAL      0x304F5845
+#define  EXO_FLAG_620_KGN   (1 << 0)
+#define  EXO_FLAG_DBG_PRIV  (1 << 1)
+#define  EXO_FLAG_DBG_USER  (1 << 2)
+
+void config_exosphere(const char *id, u32 kb, void *warmboot, void *pkg1, bool debug)
 {
 	u32 exoFwNo = 0;
 	u32 exoFlags = 0;

-	vu32 *mb_exo_magic = (vu32 *)EXO_MAGIC_ADDR;
-	vu32 *mb_exo_fw_no = (vu32 *)EXO_FWNO_ADDR;
-	vu32 *mb_exo_flags = (vu32 *)EXO_FLAGS_ADDR;
+	volatile exo_cfg_t *exo_cfg_depr = (exo_cfg_t *)EXO_CFG_DEPR_ADDR;
+	volatile exo_cfg_t *exo_cfg = (exo_cfg_t *)EXO_CFG_ADDR;

 	switch (kb)
 	{
@@ -53,14 +71,42 @@ void config_exosphere(const char *id, u32 kb, bool debug)
 		break;
 	}

-	if (kb >= KB_FIRMWARE_VERSION_620)
+	if (kb == KB_FIRMWARE_VERSION_620)
 		exoFlags |= EXO_FLAG_620_KGN;

 	if (debug)
 		exoFlags |= EXO_FLAG_DBG_PRIV;

 	// Set mailbox values.
-	*mb_exo_magic = EXO_MAGIC_VAL;
-	*mb_exo_fw_no = exoFwNo;
-	*mb_exo_flags = exoFlags;
+	exo_cfg_depr->magic = EXO_MAGIC_VAL;
+	exo_cfg->magic = EXO_MAGIC_VAL;
+
+	exo_cfg_depr->fwno = exoFwNo;
+	exo_cfg->fwno = exoFwNo;
+
+	exo_cfg_depr->flags = exoFlags;
+	exo_cfg->flags = exoFlags;
+
+	volatile wb_cfg_t *wb_cfg = (wb_cfg_t *)(warmboot + ATM_WB_HEADER_OFF);
+
+	if (wb_cfg->magic == ATM_WB_MAGIC)
+	{
+		wb_cfg->fwno = exoFwNo;
+
+		sdmmc_storage_t storage;
+		sdmmc_t sdmmc;
+
+		// Set warmboot binary rsa modulus.
+		u8 *rsa_mod = (u8 *)malloc(512);
+
+		sdmmc_storage_init_mmc(&storage, &sdmmc, SDMMC_4, SDMMC_BUS_WIDTH_8, 4);
+		sdmmc_storage_set_mmc_partition(&storage, 1);
+		sdmmc_storage_read(&storage, 1, 1, rsa_mod);
+		sdmmc_storage_end(&storage);
+
+		// Patch AutoRCM.
+		rsa_mod[0x10] = 0xF7;
+
+		memcpy(warmboot + 0x10, rsa_mod + 0x10, 0x100);
+	}
 }
--- a/bootloader/hos/secmon_exo.h
+++ b/bootloader/hos/secmon_exo.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2018 CTCaer
+ * Copyright (C) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -19,6 +19,6 @@

 #include "../utils/types.h"

-void config_exosphere(const char *id, u32 kb, bool debug);
+void config_exosphere(const char *id, u32 kb, void *warmboot, void *pkg1, bool debug);

 #endif
--- a/bootloader/hos/sept.c
+++ b/bootloader/hos/sept.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2019 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <string.h>
+
+#include "hos.h"
+#include "sept.h"
+#include "../config/config.h"
+#include "../gfx/di.h"
+#include "../ianos/ianos.h"
+#include "../libs/fatfs/ff.h"
+#include "../mem/heap.h"
+#include "../soc/pmc.h"
+#include "../soc/t210.h"
+#include "../storage/nx_emmc.h"
+#include "../storage/sdmmc.h"
+#include "../utils/btn.h"
+#include "../utils/types.h"
+
+#include "../gfx/gfx.h"
+extern gfx_con_t gfx_con;
+#define EPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, 0xFFCCCCCC)
+#define EPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFF0000, args, 0xFFCCCCCC)
+
+#define PATCHED_RELOC_SZ 0x94
+
+#define WB_RST_ADDR 0x40010ED0
+#define WB_RST_SIZE 0x30
+
+u8 warmboot_reboot[] = {
+	0x14, 0x00, 0x9F, 0xE5, // LDR R0, =0x7000E450
+	0x01, 0x10, 0xB0, 0xE3, // MOVS R1, #1
+	0x00, 0x10, 0x80, 0xE5, // STR R1, [R0]
+	0x0C, 0x00, 0x9F, 0xE5, // LDR R0, =0x7000E400 
+	0x10, 0x10, 0xB0, 0xE3, // MOVS R1, #0x10
+	0x00, 0x10, 0x80, 0xE5, // STR R1, [R0]
+	0xFE, 0xFF, 0xFF, 0xEA, // LOOP
+	0x50, 0xE4, 0x00, 0x70, // #0x7000E450
+	0x00, 0xE4, 0x00, 0x70  // #0x7000E400
+};
+
+#define SEPT_PRI_ADDR   0x4003F000
+
+#define SEPT_PK1T_ADDR  0xC0400000
+#define SEPT_PK1T_STACK 0x40008000
+#define SEPT_TCSZ_ADDR  (SEPT_PK1T_ADDR - 0x4)
+#define SEPT_STG1_ADDR  (SEPT_PK1T_ADDR + 0x2E100)
+#define SEPT_STG2_ADDR  (SEPT_PK1T_ADDR + 0x60E0)
+#define SEPT_PKG_SZ     (0x2F100 + WB_RST_SIZE)
+
+extern boot_cfg_t *b_cfg;
+extern hekate_config h_cfg;
+extern void *sd_file_read(char *path);
+extern void sd_mount();
+extern void sd_unmount();
+extern void reloc_patcher(u32 payload_dst, u32 payload_src, u32 payload_size);
+
+void check_sept()
+{
+	u8 *pkg1 = (u8 *)calloc(1, 0x40000);
+
+	sdmmc_storage_t storage;
+	sdmmc_t sdmmc;
+	if (!sdmmc_storage_init_mmc(&storage, &sdmmc, SDMMC_4, SDMMC_BUS_WIDTH_8, 4))
+	{
+		EPRINTF("Failed to init eMMC.");
+		goto out_free;
+	}
+	sdmmc_storage_set_mmc_partition(&storage, 1);
+
+	// Read package1.
+	sdmmc_storage_read(&storage, 0x100000 / NX_EMMC_BLOCKSIZE, 0x40000 / NX_EMMC_BLOCKSIZE, pkg1);
+	const pkg1_id_t *pkg1_id = pkg1_identify(pkg1);
+	if (!pkg1_id)
+	{
+		gfx_con.fntsz = 16;
+		EPRINTF("Unknown pkg1 version.");
+		goto out_free;
+	}
+
+	if (pkg1_id->kb >= KB_FIRMWARE_VERSION_700 && !h_cfg.sept_run)
+	{
+		sdmmc_storage_end(&storage);
+		reboot_to_sept((u8 *)pkg1 + pkg1_id->tsec_off);
+	}
+
+out_free:
+	free(pkg1);
+	sdmmc_storage_end(&storage);
+}
+
+int reboot_to_sept(const u8 *tsec_fw)
+{
+	FIL fp;
+
+	// Copy warmboot reboot code and TSEC fw.
+	memcpy((u8 *)(SEPT_PK1T_ADDR - WB_RST_SIZE), (u8 *)warmboot_reboot, sizeof(warmboot_reboot));
+	memcpy((void *)SEPT_PK1T_ADDR, tsec_fw, 0x3000);
+	*(vu32 *)SEPT_TCSZ_ADDR = 0x3000;
+	
+	// Copy sept-primary.
+	if (f_open(&fp, "sept/sept-primary.bin", FA_READ))
+		goto error;
+
+	if (f_read(&fp, (u8 *)SEPT_STG1_ADDR, f_size(&fp), NULL))
+	{
+		f_close(&fp);
+		goto error;
+	}
+	f_close(&fp);
+
+	// Copy sept-secondary.
+	if (f_open(&fp, "sept/sept-secondary.enc", FA_READ))
+		goto error;
+
+	if (f_read(&fp, (u8 *)SEPT_STG2_ADDR, f_size(&fp), NULL))
+	{
+		f_close(&fp);
+		goto error;
+	}
+	f_close(&fp);
+
+	// Save auto boot config to payload, if any.
+	boot_cfg_t *tmp_cfg = malloc(sizeof(boot_cfg_t));
+	memcpy(tmp_cfg, b_cfg, sizeof(boot_cfg_t));
+
+	tmp_cfg->boot_cfg |= (BOOT_CFG_AUTOBOOT_EN | BOOT_CFG_SEPT_RUN);
+
+	if (f_open(&fp, "sept/payload.bin", FA_READ | FA_WRITE))
+		goto error;
+
+	u32 magic;
+	f_lseek(&fp, f_size(&fp) - 6);
+	f_read(&fp, &magic, 4, NULL);
+	if (magic == 0x43544349)
+	{
+		f_lseek(&fp, PATCHED_RELOC_SZ);
+		f_write(&fp, tmp_cfg, sizeof(boot_cfg_t), NULL);
+	}
+	
+	f_close(&fp);
+
+	sd_unmount();
+
+	u32 pk1t_sept = SEPT_PK1T_ADDR - (ALIGN(PATCHED_RELOC_SZ, 0x10) + WB_RST_SIZE);
+
+	void (*sept)() = (void *)pk1t_sept;
+
+	reloc_patcher(WB_RST_ADDR, pk1t_sept, SEPT_PKG_SZ);
+
+	// Patch SDRAM init to perform an SVC immediately after second write.
+	PMC(APBDEV_PMC_SCRATCH45) = 0x2E38DFFF;
+	PMC(APBDEV_PMC_SCRATCH46) = 0x6001DC28;
+	// Set SVC handler to jump to sept-primary in IRAM.
+	PMC(APBDEV_PMC_SCRATCH33) = SEPT_PRI_ADDR;
+	PMC(APBDEV_PMC_SCRATCH40) = 0x6000F208;
+
+	display_end();
+
+	(*sept)();
+
+	return 1;
+
+error:
+	EPRINTF("Failed to run sept\n");
+	display_backlight_brightness(h_cfg.backlight, 1000);
+
+	btn_wait();
+
+	return 0;
+}
--- a/bootloader/hos/sept.h
+++ b/bootloader/hos/sept.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2019 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SEPT_H_
+#define _SEPT_H_
+
+#include "../utils/types.h"
+
+void check_sept();
+int reboot_to_sept(const u8 *tsec_fw);
+
+#endif
--- a/bootloader/ianos/ianos.c
+++ b/bootloader/ianos/ianos.c
@@ -84,7 +84,7 @@ void ianos_print_error(int errorno)
 		gfx_printf(&gfx_con, "Error loading ELF!\n");
 		break;
 	case 5:
-		gfx_printf(&gfx_con, "Error relcating ELF!\n");
+		gfx_printf(&gfx_con, "Error relocating ELF!\n");
 		break;
 	}
 }
--- a/bootloader/link.ld
+++ b/bootloader/link.ld
@@ -1,9 +1,11 @@
 ENTRY(_start)

 SECTIONS {
-	PROVIDE(__ipl_start = 0x40008000);
+	PROVIDE(__ipl_start = IPL_LOAD_ADDR);
 	. = __ipl_start;
 	.text : {
+		*(.text._start);
+		. = . + 36;
 		*(.text*);
 	}
 	.data : {
--- a/bootloader/main.c
+++ b/bootloader/main.c
@@ -1,7 +1,7 @@
 /*
 * Copyright (c) 2018 naehrwert
 *
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -25,12 +25,14 @@
 #include "gfx/logos.h"
 #include "gfx/tui.h"
 #include "hos/hos.h"
+#include "hos/sept.h"
 #include "ianos/ianos.h"
 #include "libs/compr/blz.h"
 #include "libs/fatfs/ff.h"
 #include "mem/heap.h"
 #include "mem/sdram.h"
 #include "power/max77620.h"
+#include "rtc/max77620-rtc.h"
 #include "soc/hw_init.h"
 #include "soc/i2c.h"
 #include "soc/pmc.h"
@@ -66,6 +68,7 @@ static bool sd_mounted;
 u8 *Kc_MENU_LOGO;
 #endif //MENU_LOGO_ENABLE

+boot_cfg_t *b_cfg;
 hekate_config h_cfg;

 bool sd_mount()
@@ -229,6 +232,10 @@ void reboot_rcm()
 void power_off()
 {
 	sd_unmount();
+
+	// Stop the alarm, in case we injected and powered off too fast.
+	max77620_rtc_stop_alarm();
+
 #ifdef MENU_LOGO_ENABLE
 	free(Kc_MENU_LOGO);
 #endif //MENU_LOGO_ENABLE
@@ -243,6 +250,10 @@ void check_power_off_from_hos()
 	if (hosWakeup & MAX77620_IRQ_TOP_RTC_MASK)
 	{
 		sd_unmount();
+
+		// Stop the alarm, in case we injected too fast.
+		max77620_rtc_stop_alarm();
+
 		if (h_cfg.autohosoff == 1)
 		{
 			gfx_clear_grey(&gfx_ctxt, 0x1B);
@@ -260,7 +271,7 @@ void check_power_off_from_hos()
 }

 // This is a safe and unused DRAM region for our payloads.
-#define IPL_LOAD_ADDR      0x40008000
+// IPL_LOAD_ADDR is defined in makefile.
 #define EXT_PAYLOAD_ADDR   0xC03C0000
 #define PATCHED_RELOC_SZ   0x94
 #define RCM_PAYLOAD_ADDR   (EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10))
@@ -271,21 +282,23 @@ void check_power_off_from_hos()
 void (*ext_payload_ptr)() = (void *)EXT_PAYLOAD_ADDR;
 void (*update_ptr)() = (void *)RCM_PAYLOAD_ADDR;

-void reloc_patcher(u32 payload_size)
+void reloc_patcher(u32 payload_dst, u32 payload_src, u32 payload_size)
 {
 	static const u32 START_OFF = 0x7C;
+	static const u32 STACK_OFF = 0x80;
 	static const u32 PAYLOAD_END_OFF = 0x84;
 	static const u32 IPL_START_OFF = 0x88;

-	memcpy((u8 *)EXT_PAYLOAD_ADDR, (u8 *)IPL_LOAD_ADDR, PATCHED_RELOC_SZ);
+	memcpy((u8 *)payload_src, (u8 *)IPL_LOAD_ADDR, PATCHED_RELOC_SZ);

-	*(vu32 *)(EXT_PAYLOAD_ADDR + START_OFF) = PAYLOAD_ENTRY - ALIGN(PATCHED_RELOC_SZ, 0x10);
-	*(vu32 *)(EXT_PAYLOAD_ADDR + PAYLOAD_END_OFF) = PAYLOAD_ENTRY + payload_size;
-	*(vu32 *)(EXT_PAYLOAD_ADDR + IPL_START_OFF) = PAYLOAD_ENTRY;
+	*(vu32 *)(payload_src + START_OFF) = payload_dst - ALIGN(PATCHED_RELOC_SZ, 0x10);
+	*(vu32 *)(payload_src + PAYLOAD_END_OFF) = payload_dst + payload_size;
+	*(vu32 *)(payload_src + STACK_OFF) = 0x40008000;
+	*(vu32 *)(payload_src + IPL_START_OFF) = payload_dst;

 	if (payload_size == 0x7000)
 	{
-		memcpy((u8 *)(EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10)), (u8 *)COREBOOT_ADDR, 0x7000); //Bootblock
+		memcpy((u8 *)(payload_src + ALIGN(PATCHED_RELOC_SZ, 0x10)), (u8 *)COREBOOT_ADDR, 0x7000); //Bootblock
 		*(vu32 *)CBFS_SDRAM_EN_ADDR = 0x4452414D;
 	}
 }
@@ -329,16 +342,40 @@ int launch_payload(char *path, bool update)
 		}

 		f_close(&fp);
-		if (!update)
-		{
-			free(path);
-			path = NULL;
-		}
-			
+		free(path);

+		// Check for updated version.
 		if (update)
 		{
 			u8 *update_ft = calloc(1, 6);
+
+			bool update_sept = true;
+			if (!f_open(&fp, "sept/payload.bin", FA_READ | FA_WRITE))
+			{
+				memset(update_ft, 0, 6);
+				f_lseek(&fp, f_size(&fp) - 6);
+				f_read(&fp, update_ft, 6, NULL);
+				f_close(&fp);
+				update_ft[4] -= '0';
+				update_ft[5] -= '0';
+				if (*(u32 *)update_ft == 0x43544349)
+				{
+					if (update_ft[4] == BLVERSIONMJ && update_ft[5] == BLVERSIONMN)
+						update_sept = false;
+				}
+				else
+					update_sept = false;
+			}
+
+			if (update_sept)
+			{
+				if (!f_open(&fp, "sept/payload.bin", FA_CREATE_ALWAYS | FA_WRITE))
+				{
+					f_write(&fp, buf, size, NULL);
+					f_close(&fp);
+				}
+			}	
+
 			memcpy(update_ft, buf + size - 6, 6);
 			update_ft[4] -= '0';
 			update_ft[5] -= '0';
@@ -364,12 +401,15 @@ int launch_payload(char *path, bool update)
 		if (size < 0x30000)
 		{
 			if (!update)
-				reloc_patcher(ALIGN(size, 0x10));
+				reloc_patcher(PAYLOAD_ENTRY, EXT_PAYLOAD_ADDR, ALIGN(size, 0x10));
+			else
+				memcpy((u8 *)(RCM_PAYLOAD_ADDR + PATCHED_RELOC_SZ), (u8 *)(IPL_LOAD_ADDR + PATCHED_RELOC_SZ), sizeof(boot_cfg_t));
+
 			reconfig_hw_workaround(false, byte_swap_32(*(u32 *)(buf + size - sizeof(u32))));
 		}
 		else
 		{
-			reloc_patcher(0x7000);
+			reloc_patcher(PAYLOAD_ENTRY, EXT_PAYLOAD_ADDR, 0x7000);
 			if (*(vu32 *)CBFS_SDRAM_EN_ADDR != 0x4452414D)
 				return 1;
 			reconfig_hw_workaround(true, 0);
@@ -388,6 +428,7 @@ int launch_payload(char *path, bool update)
 void auto_launch_update()
 {
 	FIL fp;
+
 	if (*(vu32 *)BOOTLOADER_UPDATED_MAGIC_ADDR == BOOTLOADER_UPDATED_MAGIC)
 		*(vu32 *)BOOTLOADER_UPDATED_MAGIC_ADDR = 0;
 	else
@@ -521,6 +562,7 @@ void ini_list_launcher()
 	u8 max_entries = 61;
 	char *payload_path = NULL;

+	ini_sec_t *cfg_tmp = NULL;
 	ini_sec_t *cfg_sec = NULL;
 	LIST_INIT(ini_list_sections);

@@ -559,7 +601,35 @@ void ini_list_launcher()
 				menu_t menu = {
 					ments, "Launch ini configurations", 0, 0
 				};
-				cfg_sec = ini_clone_section((ini_sec_t *)tui_do_menu(&gfx_con, &menu));
+
+				cfg_tmp = (ini_sec_t *)tui_do_menu(&gfx_con, &menu);
+
+				if (cfg_tmp)
+				{
+					u32 non_cfg = 1;
+					for (int j = 2; j < i; j++)
+					{
+						if (ments[j].type != INI_CHOICE)
+							non_cfg++;
+
+						if (ments[j].data == cfg_tmp)
+						{
+							b_cfg->boot_cfg = BOOT_CFG_FROM_LAUNCH;
+							b_cfg->autoboot = j - non_cfg;
+							b_cfg->autoboot_list = 1;
+
+							break;
+						}
+					}
+				}
+
+				payload_path = ini_check_payload_section(cfg_tmp);
+
+				if (cfg_tmp && !payload_path)
+					check_sept();
+
+				cfg_sec = ini_clone_section(cfg_tmp);
+
 				if (!cfg_sec)
 				{
 					free(ments);
@@ -569,12 +639,12 @@ void ini_list_launcher()
 				}
 			}
 			else
-				EPRINTF("No ini configurations found.");
+				EPRINTF("No ini configs found.");
 			free(ments);
 			ini_free(&ini_list_sections);
 		}
 		else
-			EPRINTF("Could not find any ini\nin bootloader/ini folder!");
+			EPRINTF("Could not find any ini\nin bootloader/ini!");
 	}

 	if (!cfg_sec)
@@ -584,8 +654,6 @@ void ini_list_launcher()
 	free(Kc_MENU_LOGO);
 #endif //MENU_LOGO_ENABLE

-	payload_path = ini_check_payload_section(cfg_sec);
-
 	if (payload_path)
 	{
 		ini_free_section(cfg_sec);
@@ -617,6 +685,7 @@ void launch_firmware()
 	u8 max_entries = 61;
 	char *payload_path = NULL;

+	ini_sec_t *cfg_tmp = NULL;
 	ini_sec_t *cfg_sec = NULL;
 	LIST_INIT(ini_sections);

@@ -669,7 +738,33 @@ void launch_firmware()
 			menu_t menu = {
 				ments, "Launch configurations", 0, 0
 			};
-			cfg_sec = ini_clone_section((ini_sec_t *)tui_do_menu(&gfx_con, &menu));
+
+			cfg_tmp = (ini_sec_t *)tui_do_menu(&gfx_con, &menu);
+
+			if (cfg_tmp)
+			{
+				u8 non_cfg = 4;
+				for (int j = 5; j < i; j++)
+				{
+					if (ments[j].type != INI_CHOICE)
+						non_cfg++;
+					if (ments[j].data == cfg_tmp)
+					{
+						b_cfg->boot_cfg = BOOT_CFG_FROM_LAUNCH;
+						b_cfg->autoboot = j - non_cfg;
+						b_cfg->autoboot_list = 0;
+
+						break;
+					}
+				}
+			}
+
+			payload_path = ini_check_payload_section(cfg_tmp);
+
+			if (cfg_tmp && !payload_path)
+				check_sept();
+
+			cfg_sec = ini_clone_section(cfg_tmp);
 			if (!cfg_sec)
 			{
 				free(ments);
@@ -682,7 +777,7 @@ void launch_firmware()
 			ini_free(&ini_sections);
 		}
 		else
-			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists in SD Card!");
+			EPRINTF("Could not open 'bootloader/hekate_ipl.ini'.\nMake sure it exists!");
 	}

 	if (!cfg_sec)
@@ -698,8 +793,6 @@ void launch_firmware()
 	free(Kc_MENU_LOGO);
 #endif //MENU_LOGO_ENABLE

-	payload_path = ini_check_payload_section(cfg_sec);
-
 	if (payload_path)
 	{
 		ini_free_section(cfg_sec);
@@ -726,11 +819,16 @@ out:

 void auto_launch_firmware()
 {
-	auto_launch_update();
+	if (!(b_cfg->boot_cfg & BOOT_CFG_FROM_LAUNCH))
+	{
+		auto_launch_update();
+		gfx_con.mute = true;
+	}

 	u8 *BOOTLOGO = NULL;
 	char *payload_path = NULL;
 	FIL fp;
+	u32 btn = 0;

 	struct _bmp_data
 	{
@@ -750,8 +848,6 @@ void auto_launch_firmware()
 	LIST_INIT(ini_sections);
 	LIST_INIT(ini_list_sections);

-	gfx_con.mute = true;
-
 	if (sd_mount())
 	{
 		if (f_open(&fp, "bootloader/hekate_ipl.ini", FA_READ))
@@ -781,16 +877,29 @@ void auto_launch_firmware()
 								h_cfg.autoboot_list = atoi(kv->val);
 							else if (!strcmp("bootwait", kv->key))
 								h_cfg.bootwait = atoi(kv->val);
-							else if (!strcmp("customlogo", kv->key))
-								h_cfg.customlogo = atoi(kv->val);
 							else if (!strcmp("verification", kv->key))
 								h_cfg.verification = atoi(kv->val);
 							else if (!strcmp("backlight", kv->key))
 								h_cfg.backlight = atoi(kv->val);
 							else if (!strcmp("autohosoff", kv->key))
 								h_cfg.autohosoff = atoi(kv->val);
+							else if (!strcmp("autonogc", kv->key))
+								h_cfg.autonogc = atoi(kv->val);
 						}
 						boot_entry_id++;
+
+						// Override autoboot, otherwise save it for a possbile sept run.
+						if (b_cfg->boot_cfg & BOOT_CFG_AUTOBOOT_EN)
+						{
+							h_cfg.autoboot = b_cfg->autoboot;
+							h_cfg.autoboot_list = b_cfg->autoboot_list;
+						}
+						else
+						{
+							b_cfg->autoboot = h_cfg.autoboot;
+							b_cfg->autoboot_list = h_cfg.autoboot_list;
+						}
+
 						continue;
 					}

@@ -801,7 +910,6 @@ void auto_launch_firmware()
 						{
 							if (!strcmp("logopath", kv->key))
 								bootlogoCustomEntry = kv->val;
-							gfx_printf(&gfx_con, "\n%s=%s\n\n", kv->key, kv->val);
 						}
 						break;
 					}
@@ -809,7 +917,7 @@ void auto_launch_firmware()
 				}
 			}

-			if (h_cfg.autohosoff)
+			if (h_cfg.autohosoff && !(b_cfg->boot_cfg & BOOT_CFG_AUTOBOOT_EN))
 				check_power_off_from_hos();

 			if (h_cfg.autoboot_list)
@@ -835,7 +943,6 @@ void auto_launch_firmware()
 								{
 									if (!strcmp("logopath", kv->key))
 										bootlogoCustomEntry = kv->val;
-									gfx_printf(&gfx_con, "\n%s=%s\n\n", kv->key, kv->val);
 								}
 								break;
 							}
@@ -864,9 +971,14 @@ void auto_launch_firmware()
 	else
 		goto out;

-	if (h_cfg.customlogo)
+	payload_path = ini_check_payload_section(cfg_sec);
+
+	if (!payload_path)
+		check_sept();
+
+	u8 *bitmap = NULL;
+	if (!(b_cfg->boot_cfg & BOOT_CFG_FROM_LAUNCH))
 	{
-		u8 *bitmap = NULL;
 		if (bootlogoCustomEntry != NULL) // Check if user set custom logo path at the boot entry.
 		{
 			bitmap = (u8 *)sd_file_read(bootlogoCustomEntry);
@@ -913,31 +1025,23 @@ void auto_launch_firmware()
 			else
 				free(bitmap);
 		}
+
+		// Render boot logo.
+		if (bootlogoFound)
+		{
+			gfx_render_bmp_argb(&gfx_ctxt, (u32 *)BOOTLOGO, bmpData.size_x, bmpData.size_y,
+				bmpData.pos_x, bmpData.pos_y);
+		}
+		else
+		{
+			gfx_clear_grey(&gfx_ctxt, 0x1B);
+			BOOTLOGO = (void *)malloc(0x4000);
+			blz_uncompress_srcdest(BOOTLOGO_BLZ, SZ_BOOTLOGO_BLZ, BOOTLOGO, SZ_BOOTLOGO);
+			gfx_set_rect_grey(&gfx_ctxt, BOOTLOGO, X_BOOTLOGO, Y_BOOTLOGO, 326, 544);
+		}
+		free(BOOTLOGO);
 	}

-	// Render boot logo.
-	if (bootlogoFound)
-	{
-		gfx_render_bmp_argb(&gfx_ctxt, (u32 *)BOOTLOGO, bmpData.size_x, bmpData.size_y,
-			bmpData.pos_x, bmpData.pos_y);
-	}
-	else
-	{
-		gfx_clear_grey(&gfx_ctxt, 0x1B);
-		BOOTLOGO = (void *)malloc(0x4000);
-		blz_uncompress_srcdest(BOOTLOGO_BLZ, SZ_BOOTLOGO_BLZ, BOOTLOGO, SZ_BOOTLOGO);
-		gfx_set_rect_grey(&gfx_ctxt, BOOTLOGO, X_BOOTLOGO, Y_BOOTLOGO, 326, 544);
-	}
-	free(BOOTLOGO);
-
-	display_backlight_brightness(h_cfg.backlight, 1000);
-
-	// Wait before booting. If VOL- is pressed go into bootloader menu.
-	u32 btn = btn_wait_timeout(h_cfg.bootwait * 1000, BTN_VOL_DOWN);
-
-	if (btn & BTN_VOL_DOWN)
-		goto out;
-
 	ini_free(&ini_sections);
 	if (h_cfg.autoboot_list)
 		ini_free(&ini_list_sections);
@@ -946,7 +1050,19 @@ void auto_launch_firmware()
 	free(Kc_MENU_LOGO);
 #endif //MENU_LOGO_ENABLE

-	payload_path = ini_check_payload_section(cfg_sec);
+	if (b_cfg->boot_cfg & BOOT_CFG_FROM_LAUNCH)
+		display_backlight_brightness(h_cfg.backlight, 0);
+	else if (h_cfg.bootwait)
+		display_backlight_brightness(h_cfg.backlight, 1000);
+
+	// Wait before booting. If VOL- is pressed go into bootloader menu.
+	if (!(b_cfg->boot_cfg & BOOT_CFG_FROM_LAUNCH))
+	{
+		btn = btn_wait_timeout(h_cfg.bootwait * 1000, BTN_VOL_DOWN);
+
+		if (btn & BTN_VOL_DOWN)
+			goto out;
+	}

 	if (payload_path)
 	{
@@ -970,13 +1086,15 @@ out:

 	sd_unmount();
 	gfx_con.mute = false;
+
+	b_cfg->boot_cfg &= ~(BOOT_CFG_AUTOBOOT_EN | BOOT_CFG_FROM_LAUNCH);
 }

 void about()
 {
 	static const char credits[] =
-		"\nhekate     (C) 2018 naehrwert, st4rk\n\n"
-		"CTCaer mod (C) 2018 CTCaer\n"
+		"\nhekate     (c) 2018 naehrwert, st4rk\n\n"
+		"CTCaer mod (c) 2018 CTCaer\n"
 		" ___________________________________________\n\n"
 		"Thanks to: %kderrek, nedwill, plutoo,\n"
 		"           shuffle2, smea, thexyz, yellows8%k\n"
@@ -986,14 +1104,14 @@ void about()
 		" ___________________________________________\n\n"
 		"Open source and free packages used:\n\n"
 		" - FatFs R0.13b,\n"
-		"   Copyright (C) 2018, ChaN\n\n"
+		"   Copyright (c) 2018, ChaN\n\n"
 		" - bcl-1.2.0,\n"
-		"   Copyright (C) 2003-2006, Marcus Geelnard\n\n"
+		"   Copyright (c) 2003-2006, Marcus Geelnard\n\n"
 		" - Atmosphere (SE sha256, prc id patches),\n"
-		"   Copyright (C) 2018, Atmosphere-NX\n\n"
+		"   Copyright (c) 2018, Atmosphere-NX\n\n"
 		" - elfload,\n"
-		"   Copyright (C) 2014, Owen Shepherd\n"
-		"   Copyright (C) 2018, M4xw\n"
+		"   Copyright (c) 2014, Owen Shepherd\n"
+		"   Copyright (c) 2018, M4xw\n"
 		" ___________________________________________\n\n";
 	static const char octopus[] =
 		"                         %k___\n"
@@ -1030,7 +1148,7 @@ ment_t ment_options[] = {
 	MDEF_CHGLINE(),
 	MDEF_HANDLER("Auto boot", config_autoboot),
 	MDEF_HANDLER("Boot time delay", config_bootdelay),
-	MDEF_HANDLER("Custom boot logo", config_customlogo),
+	MDEF_HANDLER("Auto NoGC", config_nogc),
 	MDEF_HANDLER("Auto HOS power off", config_auto_hos_poweroff),
 	MDEF_HANDLER("Backlight", config_backlight),
 	MDEF_END()
@@ -1109,8 +1227,8 @@ ment_t ment_tools[] = {
 	MDEF_CAPTION("-------- Misc --------", 0xFF0AB9E6),
 	MDEF_HANDLER("Dump package1/2", dump_packages12),
 	MDEF_HANDLER("Fix battery de-sync", fix_battery_desync),
-	MDEF_HANDLER("Fix archive bit (except Nintendo folder)", fix_sd_all_attr),
-	MDEF_HANDLER("Fix archive bit (Nintendo folder)", fix_sd_nin_attr),
+	MDEF_HANDLER("Fix archive bit (except Nintendo)", fix_sd_all_attr),
+	MDEF_HANDLER("Fix archive bit (Nintendo only)", fix_sd_nin_attr),
 	//MDEF_HANDLER("Fix fuel gauge configuration", fix_fuel_gauge_configuration),
 	//MDEF_HANDLER("Reset all battery cfg", reset_pmic_fuel_gauge_charger_config),
 	//MDEF_HANDLER("Minerva", minerva), // Uncomment for testing Minerva Training Cell
@@ -1141,13 +1259,17 @@ ment_t ment_top[] = {
 };
 menu_t menu_top = {
 	ment_top,
-	"hekate - CTCaer mod v4.6", 0, 0
+	"hekate - CTCaer mod v4.8", 0, 0
 };

 extern void pivot_stack(u32 stack_top);

 void ipl_main()
 {
+	// Set boot config address.
+	b_cfg = (boot_cfg_t *)(IPL_LOAD_ADDR + PATCHED_RELOC_SZ);
+
+	// Do initial HW configuration. This is compatible with consecutive reruns without a reset.
 	config_hw();

 	//Pivot the stack so we have enough space.
@@ -1165,7 +1287,7 @@ void ipl_main()
 	set_default_configuration();

 	// Save sdram lp0 config.
-	if (ianos_loader(true, "bootloader/sys/libsys_lp0.bso", DRAM_LIB, (void *)sdram_get_params()))
+	if (ianos_loader(true, "bootloader/sys/libsys_lp0.bso", DRAM_LIB, (void *)sdram_get_params_patched()))
 		h_cfg.errors |= ERR_LIBSYS_LP0;

 	display_init();
--- a/bootloader/mem/sdram.c
+++ b/bootloader/mem/sdram.c
@@ -1,5 +1,7 @@
 /*
 * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2018 balika011
+ * Copyright (c) 2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -18,11 +20,12 @@
 #include "../soc/t210.h"
 #include "mc.h"
 #include "emc.h"
+#include "sdram_param_t210.h"
 #include "../soc/pmc.h"
 #include "../utils/util.h"
 #include "../soc/fuse.h"
 #include "../power/max77620.h"
-#include "../mem/sdram_param_t210.h"
+#include "../power/max7762x.h"
 #include "../soc/clock.h"

 #define CONFIG_SDRAM_COMPRESS_CFG
@@ -388,9 +391,9 @@ break_nosleep:
 	EMC(EMC_ACPD_CONTROL) = params->emc_acpd_control;
 	EMC(EMC_TXDSRVTTGEN) = params->emc_txdsrvttgen;
 	EMC(EMC_CFG) = (params->emc_cfg & 0xE) | 0x3C00000;
-	if (params->boot_rom_patch_control & 0x80000000)
+	if (params->boot_rom_patch_control & (1 << 31))
 	{
-		*(vu32 *)(4 * (params->boot_rom_patch_control + 0x1C000000)) = params->boot_rom_patch_data;
+		*(vu32 *)(APB_MISC_BASE + params->boot_rom_patch_control * 4) = params->boot_rom_patch_data;
 		MC(MC_TIMING_CONTROL) = 1;
 	}
 	PMC(APBDEV_PMC_IO_DPD3_REQ) = ((4 * params->emc_pmc_scratch1 >> 2) + 0x40000000) & 0xCFFF0000;
@@ -489,26 +492,54 @@ break_nosleep:
 	MC(MC_EMEM_CFG_ACCESS_CTRL) = 1; //Disable write access to a bunch of EMC registers.
 }

-const void *sdram_get_params()
+sdram_params_t *sdram_get_params()
 {
 	//TODO: sdram_id should be in [0, 7].

 #ifdef CONFIG_SDRAM_COMPRESS_CFG
 	u8 *buf = (u8 *)0x40030000;
 	LZ_Uncompress(_dram_cfg_lz, buf, sizeof(_dram_cfg_lz));
-	return (const void *)&buf[sizeof(sdram_params_t) * _get_sdram_id()];
+	return (sdram_params_t *)&buf[sizeof(sdram_params_t) * _get_sdram_id()];
 #else
 	return _dram_cfgs[_get_sdram_id()];
 #endif
 }

+/*
+ * Function: sdram_get_params_patched
+ *
+ * This code implements a warmboot exploit. Warmboot, that is actually so hot, it burns Nvidia once again.
+ * If the boot_rom_patch_control's MSB is set, it uses it as an index to
+ * APB_MISC_BASE (u32 array) and sets it to the value of boot_rom_patch_data.
+ * (The MSB falls out when it gets multiplied by sizeof(u32)).
+ * Because the bootrom does not do any boundary checks, it lets us write anywhere and anything.
+ * Ipatch hardware let us apply 12 changes to the bootrom and can be changed any time.
+ * The first patch is not needed any more when the exploit is triggered, so we overwrite that.
+ * 0x10459E is the address where it returns an error when the signature is not valid.
+ * We change that to MOV R0, #0, so we pass the check.
+ *
+ * Note: The modulus in the header must match and validated.
+ */
+
+sdram_params_t *sdram_get_params_patched()
+{
+	#define IPATCH_CONFIG(addr, data) (((addr - 0x100000) / 2) << 16 | (data & 0xffff))
+	sdram_params_t *sdram_params = sdram_get_params();
+
+	// Disable Warmboot signature check.
+	sdram_params->boot_rom_patch_control = (1 << 31) | (((IPATCH_BASE + 4) - APB_MISC_BASE) / 4);
+	sdram_params->boot_rom_patch_data = IPATCH_CONFIG(0x10459E, 0x2000);
+
+	return sdram_params;
+}
+
 void sdram_init()
 {
 	//TODO: sdram_id should be in [0,4].
 	const sdram_params_t *params = (const sdram_params_t *)sdram_get_params();

 	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, 0x05);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD1, 40); //40 = (1000 * 1100 - 600000) / 12500 -> 1.1V
+	max77620_regulator_set_voltage(REGULATOR_SD1, 1100000);

 	PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
 	usleep(params->pmc_vddp_sel_wait);
--- a/bootloader/mem/sdram.h
+++ b/bootloader/mem/sdram.h
@@ -17,8 +17,11 @@
 #ifndef _SDRAM_H_
 #define _SDRAM_H_

+#include "sdram_param_t210.h"
+
 void sdram_init();
-const void *sdram_get_params();
+sdram_params_t *sdram_get_params();
+sdram_params_t *sdram_get_params_patched();
 void sdram_lp0_save_params(const void *params);

 #endif
--- a/bootloader/mem/sdram_config.inl
+++ b/bootloader/mem/sdram_config.inl
@@ -1,6 +1,5 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 balika011
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -172,7 +171,7 @@ static const u8 _dram_cfg_0[1896] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x46, 0x2C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x00, 0x00, 0xF0, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xFF,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };

@@ -333,7 +332,7 @@ static const u8 _dram_cfg_1[1896] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x46, 0x2C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x00, 0x00, 0xF0, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xFF,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };

@@ -494,7 +493,7 @@ static const u8 _dram_cfg_2[1896] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x46, 0x2C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x00, 0x00, 0xF0, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xFF,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };

@@ -655,7 +654,7 @@ static const u8 _dram_cfg_3[1896] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x46, 0x2C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x00, 0x00, 0xF0, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xFF,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };

@@ -816,7 +815,7 @@ static const u8 _dram_cfg_4[1896] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x46, 0x2C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x00, 0x00, 0xF0, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xFF,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };

@@ -977,7 +976,7 @@ static const u8 _dram_cfg_5[1896] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x46, 0x2C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x00, 0x00, 0xF0, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xFF,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };

@@ -1138,7 +1137,7 @@ static const u8 _dram_cfg_6[1896] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x46, 0x2C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x00, 0x00, 0xF0, 0xFF,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xFF,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };

--- a/bootloader/mem/sdram_config_lz.inl
+++ b/bootloader/mem/sdram_config_lz.inl
@@ -1,6 +1,5 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 balika011
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -15,7 +14,7 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

-static const u8 _dram_cfg_lz[1270] = {
+static const u8 _dram_cfg_lz[1262] = {
 	0x17, 0x03, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x00,
 	0x00, 0x2C, 0x17, 0x04, 0x09, 0x00, 0x17, 0x04, 0x04, 0x17, 0x08, 0x08,
 	0x17, 0x10, 0x10, 0x00, 0x00, 0x68, 0xBC, 0x01, 0x70, 0x0A, 0x00, 0x00,
@@ -104,22 +103,22 @@ static const u8 _dram_cfg_lz[1270] = {
 	0x17, 0x17, 0x3A, 0x7E, 0x16, 0x40, 0x17, 0x0C, 0x8B, 0x1F, 0x17, 0x2A,
 	0x38, 0x1E, 0x17, 0x0A, 0x38, 0x17, 0x13, 0x81, 0x28, 0x00, 0xC0, 0x17,
 	0x17, 0x55, 0x46, 0x24, 0x17, 0x0A, 0x81, 0x28, 0x17, 0x14, 0x38, 0x17,
-	0x18, 0x81, 0x60, 0x46, 0x2C, 0x17, 0x06, 0x38, 0xEC, 0x00, 0x00, 0x00,
-	0x01, 0x77, 0x00, 0xFC, 0x00, 0x20, 0xCF, 0x22, 0x17, 0x10, 0x82, 0x3C,
-	0x17, 0x82, 0x0C, 0x8E, 0x68, 0x17, 0x04, 0x24, 0x17, 0x5C, 0x8E, 0x68,
-	0x17, 0x07, 0x82, 0x5F, 0x80, 0x17, 0x87, 0x01, 0x8E, 0x68, 0x02, 0x17,
-	0x81, 0x4A, 0x8E, 0x68, 0x17, 0x0C, 0x87, 0x78, 0x17, 0x85, 0x28, 0x8E,
-	0x68, 0x17, 0x8E, 0x68, 0x9D, 0x50, 0x17, 0x81, 0x24, 0x8E, 0x68, 0x17,
-	0x04, 0x2C, 0x17, 0x28, 0x8E, 0x68, 0x17, 0x04, 0x30, 0x17, 0x85, 0x3C,
-	0x8E, 0x68, 0x12, 0x17, 0x07, 0x85, 0x70, 0x17, 0x88, 0x74, 0x8E, 0x68,
-	0x17, 0x87, 0x3E, 0x9D, 0x50, 0x0C, 0x17, 0x04, 0x04, 0x17, 0x12, 0x8E,
-	0x68, 0x18, 0x17, 0x87, 0x12, 0xBB, 0x20, 0x17, 0x83, 0x04, 0x9D, 0x50,
-	0x15, 0x17, 0x05, 0x8D, 0x76, 0x17, 0x0F, 0x8B, 0x49, 0x17, 0x0B, 0x18,
-	0x32, 0x00, 0x2F, 0x00, 0x32, 0x00, 0x31, 0x00, 0x34, 0x00, 0x36, 0x00,
-	0x2F, 0x00, 0x33, 0x17, 0x09, 0x84, 0x0C, 0x17, 0x18, 0x18, 0x17, 0x20,
-	0x8E, 0x68, 0x15, 0x17, 0x07, 0x5A, 0x17, 0x06, 0x5E, 0x16, 0x00, 0x15,
-	0x17, 0x82, 0x40, 0x9D, 0x50, 0x17, 0x86, 0x5F, 0xBB, 0x20, 0x3A, 0x00,
-	0x00, 0x00, 0x1D, 0x17, 0x81, 0x4F, 0xAC, 0x38, 0x3B, 0x17, 0x04, 0x04,
-	0x17, 0x86, 0x30, 0x8E, 0x68, 0x17, 0x81, 0x53, 0xAC, 0x38, 0x07, 0x17,
-	0x0D, 0x8E, 0x68, 0xA3, 0x72, 0x17, 0x83, 0x10, 0x8E, 0x68
+	0x18, 0x81, 0x60, 0x46, 0x2C, 0x17, 0x06, 0x38, 0xEC, 0x17, 0x0D, 0x16,
+	0x17, 0x0E, 0x82, 0x3C, 0x17, 0x82, 0x0C, 0x8E, 0x68, 0x17, 0x04, 0x24,
+	0x17, 0x5C, 0x8E, 0x68, 0x17, 0x07, 0x82, 0x5F, 0x80, 0x17, 0x87, 0x01,
+	0x8E, 0x68, 0x02, 0x17, 0x81, 0x4A, 0x8E, 0x68, 0x17, 0x0C, 0x87, 0x78,
+	0x17, 0x85, 0x28, 0x8E, 0x68, 0x17, 0x8E, 0x68, 0x9D, 0x50, 0x17, 0x81,
+	0x24, 0x8E, 0x68, 0x17, 0x04, 0x2C, 0x17, 0x28, 0x8E, 0x68, 0x17, 0x04,
+	0x30, 0x17, 0x85, 0x3C, 0x8E, 0x68, 0x12, 0x17, 0x07, 0x85, 0x70, 0x17,
+	0x88, 0x74, 0x8E, 0x68, 0x17, 0x87, 0x3E, 0x9D, 0x50, 0x0C, 0x17, 0x04,
+	0x04, 0x17, 0x12, 0x8E, 0x68, 0x18, 0x17, 0x87, 0x12, 0xBB, 0x20, 0x17,
+	0x83, 0x04, 0x9D, 0x50, 0x15, 0x17, 0x05, 0x8D, 0x76, 0x17, 0x0F, 0x8B,
+	0x49, 0x17, 0x0B, 0x18, 0x32, 0x00, 0x2F, 0x00, 0x32, 0x00, 0x31, 0x00,
+	0x34, 0x00, 0x36, 0x00, 0x2F, 0x00, 0x33, 0x17, 0x09, 0x84, 0x0C, 0x17,
+	0x18, 0x18, 0x17, 0x20, 0x8E, 0x68, 0x15, 0x17, 0x07, 0x5A, 0x17, 0x06,
+	0x5E, 0x16, 0x00, 0x15, 0x17, 0x82, 0x40, 0x9D, 0x50, 0x17, 0x86, 0x5F,
+	0xBB, 0x20, 0x3A, 0x00, 0x00, 0x00, 0x1D, 0x17, 0x81, 0x4F, 0xAC, 0x38,
+	0x3B, 0x17, 0x04, 0x04, 0x17, 0x86, 0x30, 0x8E, 0x68, 0x17, 0x81, 0x53,
+	0xAC, 0x38, 0x07, 0x17, 0x0D, 0x8E, 0x68, 0xA3, 0x72, 0x17, 0x83, 0x10,
+	0x8E, 0x68
 };
--- a/bootloader/mem/sdram_lp0.c
+++ b/bootloader/mem/sdram_lp0.c
@@ -1,8 +1,8 @@
 /*
 * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
 * Copyright 2014 Google Inc.
- * Copyright (C) 2018 naehrwert
- * Copyright (C) 2018 CTCaer
+ * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2018 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
--- a/bootloader/power/bq24193.c
+++ b/bootloader/power/bq24193.c
@@ -148,7 +148,7 @@ int bq24193_get_property(enum BQ24193_reg_prop prop, int *value)

 void bq24193_fake_battery_removal()
 {
-	u8  value;
+	u8 value;

 	// Disable watchdog to keep BATFET disabled.
 	value = i2c_recv_byte(I2C_1, BQ24193_I2C_ADDR, BQ24193_ChrgTermTimer);
--- a/bootloader/power/max77620.h
+++ b/bootloader/power/max77620.h
@@ -2,6 +2,7 @@
 * Defining registers address and its bit definitions of MAX77620 and MAX20024
 *
 * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -14,275 +15,277 @@
 #define MAX77620_I2C_ADDR 0x3C

 /* GLOBAL, PMIC, GPIO, FPS, ONOFFC, CID Registers */
-#define MAX77620_REG_CNFGGLBL1			0x00
-#define MAX77620_REG_CNFGGLBL2			0x01
-#define MAX77620_REG_CNFGGLBL3			0x02
-#define MAX77620_REG_CNFG1_32K			0x03
-#define MAX77620_REG_CNFGBBC			0x04
-#define MAX77620_REG_IRQTOP			0x05
-#define MAX77620_REG_INTLBT			0x06
-#define MAX77620_REG_IRQSD			0x07
-#define MAX77620_REG_IRQ_LVL2_L0_7		0x08
-#define MAX77620_REG_IRQ_LVL2_L8		0x09
-#define MAX77620_REG_IRQ_LVL2_GPIO		0x0A
-#define MAX77620_REG_ONOFFIRQ			0x0B
-#define MAX77620_REG_NVERC			0x0C
-#define MAX77620_REG_IRQTOPM			0x0D
-#define MAX77620_REG_INTENLBT			0x0E
-#define MAX77620_REG_IRQMASKSD			0x0F
-#define MAX77620_REG_IRQ_MSK_L0_7		0x10
-#define MAX77620_REG_IRQ_MSK_L8			0x11
-#define MAX77620_REG_ONOFFIRQM			0x12
-#define MAX77620_REG_STATLBT			0x13
-#define MAX77620_REG_STATSD			0x14
-#define MAX77620_REG_ONOFFSTAT			0x15
+#define MAX77620_REG_CNFGGLBL1      0x00
+#define  MAX77620_CNFGGLBL1_LBDAC_EN          (1 << 7)
+#define  MAX77620_CNFGGLBL1_MPPLD             (1 << 6)
+#define  MAX77620_CNFGGLBL1_LBHYST            ((1 << 5) | (1 << 4))
+#define  MAX77620_CNFGGLBL1_LBHYST_N          (1 << 4)
+#define  MAX77620_CNFGGLBL1_LBDAC             0x0E
+#define  MAX77620_CNFGGLBL1_LBDAC_N           (1 << 1)
+#define  MAX77620_CNFGGLBL1_LBRSTEN           (1 << 0)
+
+#define MAX77620_REG_CNFGGLBL2      0x01
+#define MAX77620_REG_CNFGGLBL3      0x02
+#define  MAX77620_WDTC_MASK                   0x3
+#define  MAX77620_WDTOFFC                     (1 << 4)
+#define  MAX77620_WDTSLPC                     (1 << 3)
+#define  MAX77620_WDTEN                       (1 << 2)
+#define  MAX77620_TWD_MASK                    0x3
+#define  MAX77620_TWD_2s                      0x0
+#define  MAX77620_TWD_16s                     0x1
+#define  MAX77620_TWD_64s                     0x2
+#define  MAX77620_TWD_128s                    0x3
+
+#define MAX77620_REG_CNFG1_32K      0x03
+#define  MAX77620_CNFG1_32K_OUT0_EN           (1 << 2)
+
+#define MAX77620_REG_CNFGBBC        0x04
+#define  MAX77620_CNFGBBC_ENABLE              (1 << 0)
+#define  MAX77620_CNFGBBC_CURRENT_MASK        0x06
+#define  MAX77620_CNFGBBC_CURRENT_SHIFT       1
+#define  MAX77620_CNFGBBC_VOLTAGE_MASK        0x18
+#define  MAX77620_CNFGBBC_VOLTAGE_SHIFT       3
+#define  MAX77620_CNFGBBC_LOW_CURRENT_DISABLE (1 << 5)
+#define  MAX77620_CNFGBBC_RESISTOR_MASK       0xC0
+#define  MAX77620_CNFGBBC_RESISTOR_SHIFT      6
+#define  MAX77620_CNFGBBC_RESISTOR_100        (0 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+#define  MAX77620_CNFGBBC_RESISTOR_1K         (1 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+#define  MAX77620_CNFGBBC_RESISTOR_3K         (2 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+#define  MAX77620_CNFGBBC_RESISTOR_6K         (3 << MAX77620_CNFGBBC_RESISTOR_SHIFT)
+
+#define MAX77620_REG_IRQTOP         0x05
+#define  MAX77620_IRQ_TOP_GLBL_MASK           (1 << 7)
+#define  MAX77620_IRQ_TOP_SD_MASK             (1 << 6)
+#define  MAX77620_IRQ_TOP_LDO_MASK            (1 << 5)
+#define  MAX77620_IRQ_TOP_GPIO_MASK           (1 << 4)
+#define  MAX77620_IRQ_TOP_RTC_MASK            (1 << 3)
+#define  MAX77620_IRQ_TOP_32K_MASK            (1 << 2)
+#define  MAX77620_IRQ_TOP_ONOFF_MASK          (1 << 1)
+
+#define MAX77620_REG_INTLBT         0x06
+#define MAX77620_REG_IRQTOPM        0x0D
+#define  MAX77620_IRQ_LBM_MASK                (1 << 3)
+#define  MAX77620_IRQ_TJALRM1_MASK            (1 << 2)
+#define  MAX77620_IRQ_TJALRM2_MASK            (1 << 1)
+
+#define MAX77620_REG_IRQSD          0x07
+#define MAX77620_REG_IRQ_LVL2_L0_7  0x08
+#define MAX77620_REG_IRQ_LVL2_L8    0x09
+#define MAX77620_REG_IRQ_LVL2_GPIO  0x0A
+#define MAX77620_REG_ONOFFIRQ       0x0B
+#define MAX77620_REG_NVERC          0x0C
+
+#define MAX77620_REG_INTENLBT       0x0E
+#define  MAX77620_GLBLM_MASK                  (1 << 0)
+
+#define MAX77620_REG_IRQMASKSD      0x0F
+#define MAX77620_REG_IRQ_MSK_L0_7   0x10
+#define MAX77620_REG_IRQ_MSK_L8     0x11
+#define MAX77620_REG_ONOFFIRQM      0x12
+#define MAX77620_REG_STATLBT        0x13
+#define MAX77620_REG_STATSD         0x14
+#define MAX77620_REG_ONOFFSTAT      0x15

 /* SD and LDO Registers */
-#define MAX77620_REG_SD0			0x16
-#define MAX77620_REG_SD1			0x17
-#define MAX77620_REG_SD2			0x18
-#define MAX77620_REG_SD3			0x19
-#define MAX77620_REG_SD4			0x1A
-#define MAX77620_REG_DVSSD0			0x1B
-#define MAX77620_REG_DVSSD1			0x1C
-#define MAX77620_REG_SD0_CFG			0x1D
-#define MAX77620_REG_SD1_CFG			0x1E
-#define MAX77620_REG_SD2_CFG			0x1F
-#define MAX77620_REG_SD3_CFG			0x20
-#define MAX77620_REG_SD4_CFG			0x21
-#define MAX77620_REG_SD_CFG2			0x22
-#define MAX77620_REG_LDO0_CFG			0x23
-#define MAX77620_REG_LDO0_CFG2			0x24
-#define MAX77620_REG_LDO1_CFG			0x25
-#define MAX77620_REG_LDO1_CFG2			0x26
-#define MAX77620_REG_LDO2_CFG			0x27
-#define MAX77620_REG_LDO2_CFG2			0x28
-#define MAX77620_REG_LDO3_CFG			0x29
-#define MAX77620_REG_LDO3_CFG2			0x2A
-#define MAX77620_REG_LDO4_CFG			0x2B
-#define MAX77620_REG_LDO4_CFG2			0x2C
-#define MAX77620_REG_LDO5_CFG			0x2D
-#define MAX77620_REG_LDO5_CFG2			0x2E
-#define MAX77620_REG_LDO6_CFG			0x2F
-#define MAX77620_REG_LDO6_CFG2			0x30
-#define MAX77620_REG_LDO7_CFG			0x31
-#define MAX77620_REG_LDO7_CFG2			0x32
-#define MAX77620_REG_LDO8_CFG			0x33
-#define MAX77620_REG_LDO8_CFG2			0x34
-#define MAX77620_REG_LDO_CFG3			0x35
+#define MAX77620_REG_SD0            0x16
+#define MAX77620_REG_SD1            0x17
+#define MAX77620_REG_SD2            0x18
+#define MAX77620_REG_SD3            0x19
+#define MAX77620_REG_SD4            0x1A
+#define  MAX77620_SDX_VOLT_MASK               0xFF
+#define  MAX77620_SD0_VOLT_MASK               0x3F
+#define  MAX77620_SD1_VOLT_MASK               0x7F
+#define  MAX77620_LDO_VOLT_MASK               0x3F
+#define MAX77620_REG_DVSSD0         0x1B
+#define MAX77620_REG_DVSSD1         0x1C
+#define MAX77620_REG_SD0_CFG        0x1D
+#define MAX77620_REG_SD1_CFG        0x1E
+#define MAX77620_REG_SD2_CFG        0x1F
+#define MAX77620_REG_SD3_CFG        0x20
+#define MAX77620_REG_SD4_CFG        0x21
+#define MAX77620_REG_SD_CFG2        0x22
+#define MAX77620_REG_LDO0_CFG       0x23
+#define MAX77620_REG_LDO0_CFG2      0x24
+#define MAX77620_REG_LDO1_CFG       0x25
+#define MAX77620_REG_LDO1_CFG2      0x26
+#define MAX77620_REG_LDO2_CFG       0x27
+#define MAX77620_REG_LDO2_CFG2      0x28
+#define MAX77620_REG_LDO3_CFG       0x29
+#define MAX77620_REG_LDO3_CFG2      0x2A
+#define MAX77620_REG_LDO4_CFG       0x2B
+#define MAX77620_REG_LDO4_CFG2      0x2C
+#define MAX77620_REG_LDO5_CFG       0x2D
+#define MAX77620_REG_LDO5_CFG2      0x2E
+#define MAX77620_REG_LDO6_CFG       0x2F
+#define MAX77620_REG_LDO6_CFG2      0x30
+#define MAX77620_REG_LDO7_CFG       0x31
+#define MAX77620_REG_LDO7_CFG2      0x32
+#define MAX77620_REG_LDO8_CFG       0x33
+#define MAX77620_REG_LDO8_CFG2      0x34
+#define  MAX77620_LDO_POWER_MODE_MASK         0xC0
+#define  MAX77620_LDO_POWER_MODE_SHIFT        6
+#define  MAX77620_POWER_MODE_NORMAL	          3
+#define  MAX77620_POWER_MODE_LPM              2
+#define  MAX77620_POWER_MODE_GLPM             1
+#define  MAX77620_POWER_MODE_DISABLE          0
+#define  MAX20024_LDO_CFG2_MPOK_MASK          (1 << 2)
+#define  MAX77620_LDO_CFG2_ADE_MASK           (1 << 1)
+#define  MAX77620_LDO_CFG2_ADE_DISABLE        0
+#define  MAX77620_LDO_CFG2_ADE_ENABLE         (1 << 1)
+#define  MAX77620_LDO_CFG2_SS_MASK            (1 << 0)
+#define  MAX77620_LDO_CFG2_SS_FAST            (1 << 0)
+#define  MAX77620_LDO_CFG2_SS_SLOW            0

-#define MAX77620_LDO_SLEW_RATE_MASK		0x1
+#define MAX77620_REG_LDO_CFG3       0x35
+#define  MAX77620_TRACK4_MASK                 (1 << 5)
+#define  MAX77620_TRACK4_SHIFT                5

-/* LDO Configuration 3 */
-#define MAX77620_TRACK4_MASK			(1 << 5)
-#define MAX77620_TRACK4_SHIFT			5
+#define MAX77620_LDO_SLEW_RATE_MASK 0x1

-/* Voltage */
-#define MAX77620_SDX_VOLT_MASK			0xFF
-#define MAX77620_SD0_VOLT_MASK			0x3F
-#define MAX77620_SD1_VOLT_MASK			0x7F
-#define MAX77620_LDO_VOLT_MASK			0x3F
+#define MAX77620_REG_GPIO0          0x36
+#define MAX77620_REG_GPIO1          0x37
+#define MAX77620_REG_GPIO2          0x38
+#define MAX77620_REG_GPIO3          0x39
+#define MAX77620_REG_GPIO4          0x3A
+#define MAX77620_REG_GPIO5          0x3B
+#define MAX77620_REG_GPIO6          0x3C
+#define MAX77620_REG_GPIO7          0x3D
+#define MAX77620_REG_PUE_GPIO       0x3E
+#define MAX77620_REG_PDE_GPIO       0x3F
+#define MAX77620_REG_AME_GPIO       0x40

-#define MAX77620_REG_GPIO0			0x36
-#define MAX77620_REG_GPIO1			0x37
-#define MAX77620_REG_GPIO2			0x38
-#define MAX77620_REG_GPIO3			0x39
-#define MAX77620_REG_GPIO4			0x3A
-#define MAX77620_REG_GPIO5			0x3B
-#define MAX77620_REG_GPIO6			0x3C
-#define MAX77620_REG_GPIO7			0x3D
-#define MAX77620_REG_PUE_GPIO			0x3E
-#define MAX77620_REG_PDE_GPIO			0x3F
-#define MAX77620_REG_AME_GPIO			0x40
-#define MAX77620_REG_ONOFFCNFG1			0x41
-#define MAX77620_REG_ONOFFCNFG2			0x42
+#define MAX77620_REG_ONOFFCNFG1     0x41
+#define  MAX77620_ONOFFCNFG1_SFT_RST          (1 << 7)
+#define  MAX77620_ONOFFCNFG1_MRT_MASK         0x38
+#define  MAX77620_ONOFFCNFG1_MRT_SHIFT        0x3
+#define  MAX77620_ONOFFCNFG1_SLPEN            (1 << 2)
+#define  MAX77620_ONOFFCNFG1_PWR_OFF          (1 << 1)
+#define  MAX20024_ONOFFCNFG1_CLRSE            0x18
+
+#define MAX77620_REG_ONOFFCNFG2     0x42
+#define  MAX77620_ONOFFCNFG2_SFT_RST_WK       (1 << 7)
+#define  MAX77620_ONOFFCNFG2_WD_RST_WK        (1 << 6)
+#define  MAX77620_ONOFFCNFG2_SLP_LPM_MSK      (1 << 5)
+#define  MAX77620_ONOFFCNFG2_WK_ALARM1        (1 << 2)
+#define  MAX77620_ONOFFCNFG2_WK_EN0           (1 << 0)

 /* FPS Registers */
-#define MAX77620_REG_FPS_CFG0			0x43
-#define MAX77620_REG_FPS_CFG1			0x44
-#define MAX77620_REG_FPS_CFG2			0x45
-#define MAX77620_REG_FPS_LDO0			0x46
-#define MAX77620_REG_FPS_LDO1			0x47
-#define MAX77620_REG_FPS_LDO2			0x48
-#define MAX77620_REG_FPS_LDO3			0x49
-#define MAX77620_REG_FPS_LDO4			0x4A
-#define MAX77620_REG_FPS_LDO5			0x4B
-#define MAX77620_REG_FPS_LDO6			0x4C
-#define MAX77620_REG_FPS_LDO7			0x4D
-#define MAX77620_REG_FPS_LDO8			0x4E
-#define MAX77620_REG_FPS_SD0			0x4F
-#define MAX77620_REG_FPS_SD1			0x50
-#define MAX77620_REG_FPS_SD2			0x51
-#define MAX77620_REG_FPS_SD3			0x52
-#define MAX77620_REG_FPS_SD4			0x53
-#define MAX77620_REG_FPS_NONE			0
-
-#define MAX77620_FPS_SRC_MASK			0xC0
-#define MAX77620_FPS_SRC_SHIFT			6
-#define MAX77620_FPS_PU_PERIOD_MASK		0x38
-#define MAX77620_FPS_PU_PERIOD_SHIFT		3
-#define MAX77620_FPS_PD_PERIOD_MASK		0x07
-#define MAX77620_FPS_PD_PERIOD_SHIFT		0
-#define MAX77620_FPS_TIME_PERIOD_MASK		0x38
-#define MAX77620_FPS_TIME_PERIOD_SHIFT		3
-#define MAX77620_FPS_EN_SRC_MASK		0x06
-#define MAX77620_FPS_EN_SRC_SHIFT		1
-#define MAX77620_FPS_ENFPS_SW_MASK		0x01
-#define MAX77620_FPS_ENFPS_SW			0x01
+#define MAX77620_REG_FPS_CFG0       0x43
+#define MAX77620_REG_FPS_CFG1       0x44
+#define MAX77620_REG_FPS_CFG2       0x45
+#define MAX77620_REG_FPS_LDO0       0x46
+#define MAX77620_REG_FPS_LDO1       0x47
+#define MAX77620_REG_FPS_LDO2       0x48
+#define MAX77620_REG_FPS_LDO3       0x49
+#define MAX77620_REG_FPS_LDO4       0x4A
+#define MAX77620_REG_FPS_LDO5       0x4B
+#define MAX77620_REG_FPS_LDO6       0x4C
+#define MAX77620_REG_FPS_LDO7       0x4D
+#define MAX77620_REG_FPS_LDO8       0x4E
+#define MAX77620_REG_FPS_SD0        0x4F
+#define MAX77620_REG_FPS_SD1        0x50
+#define MAX77620_REG_FPS_SD2        0x51
+#define MAX77620_REG_FPS_SD3        0x52
+#define MAX77620_REG_FPS_SD4        0x53
+#define MAX77620_REG_FPS_NONE       0
+#define  MAX77620_FPS_SRC_MASK                0xC0
+#define  MAX77620_FPS_SRC_SHIFT               6
+#define  MAX77620_FPS_PU_PERIOD_MASK          0x38
+#define  MAX77620_FPS_PU_PERIOD_SHIFT         3
+#define  MAX77620_FPS_PD_PERIOD_MASK          0x07
+#define  MAX77620_FPS_PD_PERIOD_SHIFT         0

 /* Minimum and maximum FPS period time (in microseconds) are
 * different for MAX77620 and Max20024.
 */
-#define MAX77620_FPS_PERIOD_MIN_US		40
-#define MAX20024_FPS_PERIOD_MIN_US		20
+#define MAX77620_FPS_COUNT 3

-#define MAX77620_FPS_PERIOD_MAX_US		2560
-#define MAX20024_FPS_PERIOD_MAX_US		5120
+#define MAX77620_FPS_PERIOD_MIN_US 40
+#define MAX20024_FPS_PERIOD_MIN_US 20

-#define MAX77620_REG_FPS_GPIO1			0x54
-#define MAX77620_REG_FPS_GPIO2			0x55
-#define MAX77620_REG_FPS_GPIO3			0x56
-#define MAX77620_REG_FPS_RSO			0x57
-#define MAX77620_REG_CID0			0x58
-#define MAX77620_REG_CID1			0x59
-#define MAX77620_REG_CID2			0x5A
-#define MAX77620_REG_CID3			0x5B
-#define MAX77620_REG_CID4			0x5C
-#define MAX77620_REG_CID5			0x5D
+#define MAX77620_FPS_PERIOD_MAX_US 2560
+#define MAX20024_FPS_PERIOD_MAX_US 5120

-#define MAX77620_REG_DVSSD4			0x5E
-#define MAX20024_REG_MAX_ADD			0x70
+#define MAX77620_REG_FPS_GPIO1      0x54
+#define MAX77620_REG_FPS_GPIO2      0x55
+#define MAX77620_REG_FPS_GPIO3      0x56
+#define  MAX77620_FPS_TIME_PERIOD_MASK        0x38
+#define  MAX77620_FPS_TIME_PERIOD_SHIFT       3
+#define  MAX77620_FPS_EN_SRC_MASK             0x06
+#define  MAX77620_FPS_EN_SRC_SHIFT            1
+#define  MAX77620_FPS_ENFPS_SW_MASK           0x01
+#define  MAX77620_FPS_ENFPS_SW                0x01

-#define MAX77620_CID_DIDM_MASK			0xF0
-#define MAX77620_CID_DIDM_SHIFT			4
+#define MAX77620_REG_FPS_RSO        0x57
+#define MAX77620_REG_CID0           0x58
+#define MAX77620_REG_CID1           0x59
+#define MAX77620_REG_CID2           0x5A
+#define MAX77620_REG_CID3           0x5B
+#define MAX77620_REG_CID4           0x5C
+#define MAX77620_REG_CID5           0x5D
+
+#define MAX77620_REG_DVSSD4         0x5E
+#define MAX20024_REG_MAX_ADD        0x70
+
+#define MAX77620_CID_DIDM_MASK                0xF0
+#define MAX77620_CID_DIDM_SHIFT               4

 /* CNCG2SD */
-#define MAX77620_SD_CNF2_ROVS_EN_SD1		(1 << 1)
-#define MAX77620_SD_CNF2_ROVS_EN_SD0		(1 << 2)
+#define MAX77620_SD_CNF2_ROVS_EN_SD1          (1 << 1)
+#define MAX77620_SD_CNF2_ROVS_EN_SD0          (1 << 2)

 /* Device Identification Metal */
-#define MAX77620_CID5_DIDM(n)			(((n) >> 4) & 0xF)
+#define MAX77620_CID5_DIDM(n) (((n) >> 4) & 0xF)
 /* Device Indentification OTP */
-#define MAX77620_CID5_DIDO(n)			((n) & 0xF)
+#define MAX77620_CID5_DIDO(n) ((n) & 0xF)

 /* SD CNFG1 */
-#define MAX77620_SD_SR_MASK			0xC0
-#define MAX77620_SD_SR_SHIFT			6
-#define MAX77620_SD_POWER_MODE_MASK		0x30
-#define MAX77620_SD_POWER_MODE_SHIFT		4
-#define MAX77620_SD_CFG1_ADE_MASK		(1 << 3)
-#define MAX77620_SD_CFG1_ADE_DISABLE		0
-#define MAX77620_SD_CFG1_ADE_ENABLE		(1 << 3)
-#define MAX77620_SD_FPWM_MASK			0x04
-#define MAX77620_SD_FPWM_SHIFT			2
-#define MAX77620_SD_FSRADE_MASK			0x01
-#define MAX77620_SD_FSRADE_SHIFT		0
-#define MAX77620_SD_CFG1_FPWM_SD_MASK		(1 << 2)
-#define MAX77620_SD_CFG1_FPWM_SD_SKIP		0
-#define MAX77620_SD_CFG1_FPWM_SD_FPWM		(1 << 2)
-#define MAX20024_SD_CFG1_MPOK_MASK		(1 << 1)
-#define MAX77620_SD_CFG1_FSRADE_SD_MASK		(1 << 0)
-#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE	0
-#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE	(1 << 0)
+#define MAX77620_SD_SR_MASK                   0xC0
+#define MAX77620_SD_SR_SHIFT                  6
+#define MAX77620_SD_POWER_MODE_MASK           0x30
+#define MAX77620_SD_POWER_MODE_SHIFT          4
+#define MAX77620_SD_CFG1_ADE_MASK             (1 << 3)
+#define MAX77620_SD_CFG1_ADE_DISABLE          0
+#define MAX77620_SD_CFG1_ADE_ENABLE           (1 << 3)
+#define MAX77620_SD_FPWM_MASK                 0x04
+#define MAX77620_SD_FPWM_SHIFT                2
+#define MAX77620_SD_FSRADE_MASK               0x01
+#define MAX77620_SD_FSRADE_SHIFT              0
+#define MAX77620_SD_CFG1_FPWM_SD_MASK         (1 << 2)
+#define MAX77620_SD_CFG1_FPWM_SD_SKIP         0
+#define MAX77620_SD_CFG1_FPWM_SD_FPWM         (1 << 2)
+#define MAX20024_SD_CFG1_MPOK_MASK            (1 << 1)
+#define MAX77620_SD_CFG1_FSRADE_SD_MASK       (1 << 0)
+#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE    0
+#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE     (1 << 0)

-/* LDO_CNFG2 */
-#define MAX77620_LDO_POWER_MODE_MASK		0xC0
-#define MAX77620_LDO_POWER_MODE_SHIFT		6
-#define MAX20024_LDO_CFG2_MPOK_MASK		(1 << 2)
-#define MAX77620_LDO_CFG2_ADE_MASK		(1 << 1)
-#define MAX77620_LDO_CFG2_ADE_DISABLE		0
-#define MAX77620_LDO_CFG2_ADE_ENABLE		(1 << 1)
-#define MAX77620_LDO_CFG2_SS_MASK		(1 << 0)
-#define MAX77620_LDO_CFG2_SS_FAST		(1 << 0)
-#define MAX77620_LDO_CFG2_SS_SLOW		0
+#define MAX77620_CNFG_GPIO_DRV_MASK           (1 << 0)
+#define MAX77620_CNFG_GPIO_DRV_PUSHPULL       (1 << 0)
+#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN      0
+#define MAX77620_CNFG_GPIO_DIR_MASK           (1 << 1)
+#define MAX77620_CNFG_GPIO_DIR_INPUT          (1 << 1)
+#define MAX77620_CNFG_GPIO_DIR_OUTPUT         0
+#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK     (1 << 2)
+#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK    (1 << 3)
+#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH    (1 << 3)
+#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW     0
+#define MAX77620_CNFG_GPIO_INT_MASK           (0x3 << 4)
+#define MAX77620_CNFG_GPIO_INT_FALLING        (1 << 4)
+#define MAX77620_CNFG_GPIO_INT_RISING         (1 << 5)
+#define MAX77620_CNFG_GPIO_DBNC_MASK          (0x3 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_None          (0x0 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_8ms           (0x1 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_16ms          (0x2 << 6)
+#define MAX77620_CNFG_GPIO_DBNC_32ms          (0x3 << 6)

-#define MAX77620_IRQ_TOP_GLBL_MASK		(1 << 7)
-#define MAX77620_IRQ_TOP_SD_MASK		(1 << 6)
-#define MAX77620_IRQ_TOP_LDO_MASK		(1 << 5)
-#define MAX77620_IRQ_TOP_GPIO_MASK		(1 << 4)
-#define MAX77620_IRQ_TOP_RTC_MASK		(1 << 3)
-#define MAX77620_IRQ_TOP_32K_MASK		(1 << 2)
-#define MAX77620_IRQ_TOP_ONOFF_MASK		(1 << 1)
-
-#define MAX77620_IRQ_LBM_MASK			(1 << 3)
-#define MAX77620_IRQ_TJALRM1_MASK		(1 << 2)
-#define MAX77620_IRQ_TJALRM2_MASK		(1 << 1)
-
-#define MAX77620_CNFG_GPIO_DRV_MASK		(1 << 0)
-#define MAX77620_CNFG_GPIO_DRV_PUSHPULL		(1 << 0)
-#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN	0
-#define MAX77620_CNFG_GPIO_DIR_MASK		(1 << 1)
-#define MAX77620_CNFG_GPIO_DIR_INPUT		(1 << 1)
-#define MAX77620_CNFG_GPIO_DIR_OUTPUT		0
-#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK	(1 << 2)
-#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK	(1 << 3)
-#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH	(1 << 3)
-#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW	0
-#define MAX77620_CNFG_GPIO_INT_MASK		(0x3 << 4)
-#define MAX77620_CNFG_GPIO_INT_FALLING		(1 << 4)
-#define MAX77620_CNFG_GPIO_INT_RISING		(1 << 5)
-#define MAX77620_CNFG_GPIO_DBNC_MASK		(0x3 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_None		(0x0 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_8ms		(0x1 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_16ms		(0x2 << 6)
-#define MAX77620_CNFG_GPIO_DBNC_32ms		(0x3 << 6)
-
-#define MAX77620_IRQ_LVL2_GPIO_EDGE0		(1 << 0)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE1		(1 << 1)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE2		(1 << 2)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE3		(1 << 3)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE4		(1 << 4)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE5		(1 << 5)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE6		(1 << 6)
-#define MAX77620_IRQ_LVL2_GPIO_EDGE7		(1 << 7)
-
-#define MAX77620_CNFG1_32K_OUT0_EN		(1 << 2)
-
-#define MAX77620_ONOFFCNFG1_SFT_RST		(1 << 7)
-#define MAX77620_ONOFFCNFG1_MRT_MASK		0x38
-#define MAX77620_ONOFFCNFG1_MRT_SHIFT		0x3
-#define MAX77620_ONOFFCNFG1_SLPEN		(1 << 2)
-#define MAX77620_ONOFFCNFG1_PWR_OFF		(1 << 1)
-#define MAX20024_ONOFFCNFG1_CLRSE		0x18
-
-#define MAX77620_ONOFFCNFG2_SFT_RST_WK		(1 << 7)
-#define MAX77620_ONOFFCNFG2_WD_RST_WK		(1 << 6)
-#define MAX77620_ONOFFCNFG2_SLP_LPM_MSK		(1 << 5)
-#define MAX77620_ONOFFCNFG2_WK_ALARM1		(1 << 2)
-#define MAX77620_ONOFFCNFG2_WK_EN0		(1 << 0)
-
-#define MAX77620_GLBLM_MASK			(1 << 0)
-
-#define MAX77620_WDTC_MASK			0x3
-#define MAX77620_WDTOFFC			(1 << 4)
-#define MAX77620_WDTSLPC			(1 << 3)
-#define MAX77620_WDTEN				(1 << 2)
-
-#define MAX77620_TWD_MASK			0x3
-#define MAX77620_TWD_2s				0x0
-#define MAX77620_TWD_16s			0x1
-#define MAX77620_TWD_64s			0x2
-#define MAX77620_TWD_128s			0x3
-
-#define MAX77620_CNFGGLBL1_LBDAC_EN		(1 << 7)
-#define MAX77620_CNFGGLBL1_MPPLD		(1 << 6)
-#define MAX77620_CNFGGLBL1_LBHYST		((1 << 5) | (1 << 4))
-#define MAX77620_CNFGGLBL1_LBHYST_N		(1 << 4)
-#define MAX77620_CNFGGLBL1_LBDAC		0x0E
-#define MAX77620_CNFGGLBL1_LBDAC_N		(1 << 1)
-#define MAX77620_CNFGGLBL1_LBRSTEN		(1 << 0)
-
-/* CNFG BBC registers */
-#define MAX77620_CNFGBBC_ENABLE			(1 << 0)
-#define MAX77620_CNFGBBC_CURRENT_MASK		0x06
-#define MAX77620_CNFGBBC_CURRENT_SHIFT		1
-#define MAX77620_CNFGBBC_VOLTAGE_MASK		0x18
-#define MAX77620_CNFGBBC_VOLTAGE_SHIFT		3
-#define MAX77620_CNFGBBC_LOW_CURRENT_DISABLE	(1 << 5)
-#define MAX77620_CNFGBBC_RESISTOR_MASK		0xC0
-#define MAX77620_CNFGBBC_RESISTOR_SHIFT		6
-
-#define MAX77620_FPS_COUNT			3
+#define MAX77620_IRQ_LVL2_GPIO_EDGE0          (1 << 0)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE1          (1 << 1)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE2          (1 << 2)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE3          (1 << 3)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE4          (1 << 4)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE5          (1 << 5)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE6          (1 << 6)
+#define MAX77620_IRQ_LVL2_GPIO_EDGE7          (1 << 7)

 /* Interrupts */
 enum {
--- a/bootloader/power/max7762x.c
+++ b/bootloader/power/max7762x.c
@@ -1,5 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -27,12 +28,15 @@ typedef struct _max77620_regulator_t
 	u8 type;
 	const char *name;
 	u8 reg_sd;
+
 	u32 mv_step;
 	u32 mv_min;
 	u32 mv_default;
 	u32 mv_max;
+
 	u8 volt_addr;
 	u8 cfg_addr;
+
 	u8 volt_mask;
 	u8 enable_mask;
 	u8 enable_shift;
@@ -45,19 +49,19 @@ typedef struct _max77620_regulator_t
 } max77620_regulator_t;

 static const max77620_regulator_t _pmic_regulators[] = {
-	{  REGULATOR_SD,  "sd0", 0x16, 12500, 600000,  625000, 1400000,      MAX77620_REG_SD0,   MAX77620_REG_SD0_CFG, 0x3F, 0x30, 4, 0x80, 0x4F, 1, 7, 1 },
-	{  REGULATOR_SD,  "sd1", 0x17, 12500, 600000, 1125000, 1125000,      MAX77620_REG_SD1,   MAX77620_REG_SD1_CFG, 0x3F, 0x30, 4, 0x40, 0x50, 0, 1, 5 },
-	{  REGULATOR_SD,  "sd2", 0x18, 12500, 600000, 1325000, 1350000,      MAX77620_REG_SD2,   MAX77620_REG_SD2_CFG, 0xFF, 0x30, 4, 0x20, 0x51, 1, 5, 2 },
-	{  REGULATOR_SD,  "sd3", 0x19, 12500, 600000, 1800000, 1800000,      MAX77620_REG_SD3,   MAX77620_REG_SD3_CFG, 0xFF, 0x30, 4, 0x10, 0x52, 0, 3, 3 },
-	{ REGULATOR_LDO, "ldo0", 0x00, 25000, 800000, 1200000, 1200000, MAX77620_REG_LDO0_CFG, MAX77620_REG_LDO0_CFG2, 0x3F, 0xC0, 6, 0x00, 0x46, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo1", 0x00, 25000, 800000, 1050000, 1050000, MAX77620_REG_LDO1_CFG, MAX77620_REG_LDO1_CFG2, 0x3F, 0xC0, 6, 0x00, 0x47, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo2", 0x00, 50000, 800000, 1800000, 3300000, MAX77620_REG_LDO2_CFG, MAX77620_REG_LDO2_CFG2, 0x3F, 0xC0, 6, 0x00, 0x48, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo3", 0x00, 50000, 800000, 3100000, 3100000, MAX77620_REG_LDO3_CFG, MAX77620_REG_LDO3_CFG2, 0x3F, 0xC0, 6, 0x00, 0x49, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo4", 0x00, 12500, 800000,  850000,  850000, MAX77620_REG_LDO4_CFG, MAX77620_REG_LDO4_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4A, 0, 7, 1 },
-	{ REGULATOR_LDO, "ldo5", 0x00, 50000, 800000, 1800000, 1800000, MAX77620_REG_LDO5_CFG, MAX77620_REG_LDO5_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4B, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo6", 0x00, 50000, 800000, 2900000, 2900000, MAX77620_REG_LDO6_CFG, MAX77620_REG_LDO6_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4C, 3, 7, 0 },
-	{ REGULATOR_LDO, "ldo7", 0x00, 50000, 800000, 1050000, 1050000, MAX77620_REG_LDO7_CFG, MAX77620_REG_LDO7_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4D, 1, 4, 3 },
-	{ REGULATOR_LDO, "ldo8", 0x00, 50000, 800000, 1050000, 1050000, MAX77620_REG_LDO8_CFG, MAX77620_REG_LDO8_CFG2, 0x3F, 0xC0, 6, 0x00, 0x4E, 3, 7, 0 }
+	{  REGULATOR_SD,  "sd0", 0x16,  12500, 600000,  625000, 1400000,      MAX77620_REG_SD0,   MAX77620_REG_SD0_CFG, MAX77620_SD0_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x80,  MAX77620_REG_FPS_SD0,  1, 7, 1 },
+	{  REGULATOR_SD,  "sd1", 0x17,  12500, 600000, 1125000, 1125000,      MAX77620_REG_SD1,   MAX77620_REG_SD1_CFG, MAX77620_SD1_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x40,  MAX77620_REG_FPS_SD1,  0, 1, 5 },
+	{  REGULATOR_SD,  "sd2", 0x18,  12500, 600000, 1325000, 1350000,      MAX77620_REG_SD2,   MAX77620_REG_SD2_CFG, MAX77620_SDX_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x20,  MAX77620_REG_FPS_SD2,  1, 5, 2 },
+	{  REGULATOR_SD,  "sd3", 0x19,  12500, 600000, 1800000, 1800000,      MAX77620_REG_SD3,   MAX77620_REG_SD3_CFG, MAX77620_SDX_VOLT_MASK, MAX77620_SD_POWER_MODE_MASK,  MAX77620_SD_POWER_MODE_SHIFT,  0x10,  MAX77620_REG_FPS_SD3,  0, 3, 3 },
+	{ REGULATOR_LDO, "ldo0", 0x00,  25000, 800000, 1200000, 1200000, MAX77620_REG_LDO0_CFG, MAX77620_REG_LDO0_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO0, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo1", 0x00,  25000, 800000, 1050000, 1050000, MAX77620_REG_LDO1_CFG, MAX77620_REG_LDO1_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO1, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo2", 0x00,  50000, 800000, 1800000, 3300000, MAX77620_REG_LDO2_CFG, MAX77620_REG_LDO2_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO2, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo3", 0x00,  50000, 800000, 3100000, 3100000, MAX77620_REG_LDO3_CFG, MAX77620_REG_LDO3_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO3, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo4", 0x00,  12500, 800000,  850000,  850000, MAX77620_REG_LDO4_CFG, MAX77620_REG_LDO4_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO4, 0, 7, 1 },
+	{ REGULATOR_LDO, "ldo5", 0x00,  50000, 800000, 1800000, 1800000, MAX77620_REG_LDO5_CFG, MAX77620_REG_LDO5_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO5, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo6", 0x00,  50000, 800000, 2900000, 2900000, MAX77620_REG_LDO6_CFG, MAX77620_REG_LDO6_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO6, 3, 7, 0 },
+	{ REGULATOR_LDO, "ldo7", 0x00,  50000, 800000, 1050000, 1050000, MAX77620_REG_LDO7_CFG, MAX77620_REG_LDO7_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO7, 1, 4, 3 },
+	{ REGULATOR_LDO, "ldo8", 0x00,  50000, 800000, 1050000, 1050000, MAX77620_REG_LDO8_CFG, MAX77620_REG_LDO8_CFG2, MAX77620_LDO_VOLT_MASK, MAX77620_LDO_POWER_MODE_MASK, MAX77620_LDO_POWER_MODE_SHIFT, 0x00,  MAX77620_REG_FPS_LDO8, 3, 7, 0 }
 };

 int max77620_regulator_get_status(u32 id)
@@ -79,7 +83,8 @@ int max77620_regulator_config_fps(u32 id)

 	const max77620_regulator_t *reg = &_pmic_regulators[id];

-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->fps_addr, (reg->fps_src << 6) | (reg->pu_period << 3) | (reg->pd_period));
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->fps_addr,
+		(reg->fps_src << MAX77620_FPS_SRC_SHIFT) | (reg->pu_period << MAX77620_FPS_PU_PERIOD_SHIFT) | (reg->pd_period));

 	return 1;
 }
@@ -91,7 +96,7 @@ int max77620_regulator_set_voltage(u32 id, u32 mv)

 	const max77620_regulator_t *reg = &_pmic_regulators[id];

-	if (mv < reg->mv_default || mv > reg->mv_max)
+	if (mv < reg->mv_min || mv > reg->mv_max)
 		return 0;

 	u32 mult = (mv + reg->mv_step - 1 - reg->mv_min) / reg->mv_step;
@@ -113,7 +118,7 @@ int max77620_regulator_enable(u32 id, int enable)
 	u32 addr = reg->type == REGULATOR_SD ? reg->cfg_addr : reg->volt_addr;
 	u8 val = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, addr);
 	if (enable)
-		val = (val & ~reg->enable_mask) | ((3 << reg->enable_shift) & reg->enable_mask);
+		val = (val & ~reg->enable_mask) | ((MAX77620_POWER_MODE_NORMAL << reg->enable_shift) & reg->enable_mask);
 	else
 		val &= ~reg->enable_mask;
 	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, addr, val);
@@ -122,6 +127,24 @@ int max77620_regulator_enable(u32 id, int enable)
 	return 1;
 }

+int max77620_regulator_set_volt_and_flags(u32 id, u32 mv, u8 flags)
+{
+	if (id > REGULATOR_MAX)
+		return 0;
+
+	const max77620_regulator_t *reg = &_pmic_regulators[id];
+
+	if (mv < reg->mv_min || mv > reg->mv_max)
+		return 0;
+
+	u32 mult = (mv + reg->mv_step - 1 - reg->mv_min) / reg->mv_step;
+	u8 val = ((flags << reg->enable_shift) & ~reg->volt_mask) | (mult & reg->volt_mask);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->volt_addr, val);
+	usleep(1000);
+
+	return 1;
+}
+
 void max77620_config_default()
 {
 	for (u32 i = 1; i <= REGULATOR_MAX; i++)
--- a/bootloader/power/max7762x.h
+++ b/bootloader/power/max7762x.h
@@ -1,5 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
+ * Copyright (c) 2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -30,10 +31,10 @@
 *  ldo0 | Display Panel | 25000   | 800000 | 1200000    | 1200000 | 1.2V   (pkg1.1)
 *  ldo1 | XUSB, PCIE    | 25000   | 800000 | 1050000    | 1050000 | 1.05V  (pcv)
 *  ldo2 | SDMMC1        | 50000   | 800000 | 1800000    | 3300000 |
-*  ldo3 |               | 50000   | 800000 | 3100000    | 3100000 |
+*  ldo3 | GC ASIC       | 50000   | 800000 | 3100000    | 3100000 | 3.1V  (pcv)
 *  ldo4 | RTC           | 12500   | 800000 |  850000    |  850000 |
-*  ldo5 |               | 50000   | 800000 | 1800000    | 1800000 |
-*  ldo6 |               | 50000   | 800000 | 2900000    | 2900000 |
+*  ldo5 | GC ASIC       | 50000   | 800000 | 1800000    | 1800000 | 1.8V  (pcv)
+*  ldo6 | Touch, ALS    | 50000   | 800000 | 2900000    | 2900000 | 2.9V
 *  ldo7 | XUSB          | 50000   | 800000 | 1050000    | 1050000 |
 *  ldo8 | XUSB, DC      | 50000   | 800000 | 1050000    | 1050000 |
 */
@@ -108,6 +109,7 @@ int max77620_regulator_get_status(u32 id);
 int max77620_regulator_config_fps(u32 id);
 int max77620_regulator_set_voltage(u32 id, u32 mv);
 int max77620_regulator_enable(u32 id, int enable);
+int max77620_regulator_set_volt_and_flags(u32 id, u32 mv, u8 flags);
 void max77620_config_default();
 void max77620_low_battery_monitor_config();

--- a/bootloader/rtc/max77620-rtc.c
+++ b/bootloader/rtc/max77620-rtc.c
@@ -0,0 +1,77 @@
+/*
+ * PMIC Real Time Clock driver for Nintendo Switch's MAX77620-RTC
+ *
+ * Copyright (c) 2018 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "max77620-rtc.h"
+#include "../soc/i2c.h"
+#include "../utils/util.h"
+
+void max77620_rtc_get_time(rtc_time_t *time)
+{
+	u8 val = 0;
+
+	// Update RTC regs from RTC clock.
+	i2c_send_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_UPDATE0_REG, MAX77620_RTC_READ_UPDATE);
+
+	// Get control reg config.
+	val = i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_CONTROL_REG);
+	// TODO: Check for binary format also?
+
+	// Get time.
+	time->sec  = i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_SEC_REG) & 0x7F;
+	time->min  = i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_MIN_REG) & 0x7F;
+
+	time->hour = i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_HOUR_REG) & 0x1F;
+	
+	if (!(val & MAX77620_RTC_24H) && time->hour & MAX77620_RTC_HOUR_PM_MASK)
+		time->hour = (time->hour & 0xF) + 12;
+
+	// Get day of week. 1: Monday to 7: Sunday.
+	time->weekday = 0;
+	val = i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_WEEKDAY_REG);
+	for (int i = 0; i < 8; i++)
+	{
+		time->weekday++;
+		if (val & 1)
+			break;
+		val >>= 1;
+	}
+
+	// Get date.
+	time->date  = i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_DATE_REG) & 0x1f;
+	time->month = (i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_MONTH_REG) & 0xF) - 1;
+	time->year  = (i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_YEAR_REG) & 0x7F) + 2000;
+}
+
+void max77620_rtc_stop_alarm()
+{
+	u8 val = 0;
+
+	// Update RTC regs from RTC clock.
+	i2c_send_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_UPDATE0_REG, MAX77620_RTC_READ_UPDATE);
+
+	// Stop alarm for both ALARM1 and ALARM2. Horizon uses ALARM2.
+	for (int i = 0; i < (MAX77620_RTC_NR_TIME_REGS * 2); i++)
+	{
+		val = i2c_recv_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_ALARM1_SEC_REG + i);
+		val &= ~MAX77620_RTC_ALARM_EN_MASK;
+		i2c_send_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_ALARM1_SEC_REG + i, val);
+	}
+
+	// Update RTC clock from RTC regs.
+	i2c_send_byte(I2C_5, MAX77620_RTC_I2C_ADDR, MAX77620_RTC_UPDATE0_REG, MAX77620_RTC_WRITE_UPDATE);
+}
--- a/bootloader/rtc/max77620-rtc.h
+++ b/bootloader/rtc/max77620-rtc.h
@@ -0,0 +1,75 @@
+/*
+ * PMIC Real Time Clock driver for Nintendo Switch's MAX77620-RTC
+ *
+ * Copyright (c) 2018 CTCaer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _MFD_MAX77620_RTC_H_
+#define _MFD_MAX77620_RTC_H_
+
+#include "../utils/types.h"
+
+#define MAX77620_RTC_I2C_ADDR       0x68
+
+#define MAX77620_RTC_NR_TIME_REGS   7
+
+#define MAX77620_RTC_CONTROLM_REG   0x02
+#define MAX77620_RTC_CONTROL_REG    0x03
+#define  MAX77620_RTC_BIN_FORMAT (1 << 0)
+#define  MAX77620_RTC_24H        (1 << 1)
+
+#define MAX77620_RTC_UPDATE0_REG    0x04
+#define  MAX77620_RTC_WRITE_UPDATE  (1 << 0)
+#define  MAX77620_RTC_READ_UPDATE   (1 << 4)
+
+#define MAX77620_RTC_SEC_REG        0x07
+#define MAX77620_RTC_MIN_REG        0x08
+#define MAX77620_RTC_HOUR_REG       0x09
+#define  MAX77620_RTC_HOUR_PM_MASK  (1 << 6)
+#define MAX77620_RTC_WEEKDAY_REG    0x0A
+#define MAX77620_RTC_MONTH_REG      0x0B
+#define MAX77620_RTC_YEAR_REG       0x0C
+#define MAX77620_RTC_DATE_REG       0x0D
+
+#define MAX77620_ALARM1_SEC_REG     0x0E
+#define MAX77620_ALARM1_MIN_REG     0x0F
+#define MAX77620_ALARM1_HOUR_REG    0x10
+#define MAX77620_ALARM1_WEEKDAY_REG 0x11
+#define MAX77620_ALARM1_MONTH_REG   0x12
+#define MAX77620_ALARM1_YEAR_REG    0x13
+#define MAX77620_ALARM1_DATE_REG    0x14
+#define MAX77620_ALARM2_SEC_REG     0x15
+#define MAX77620_ALARM2_MIN_REG     0x16
+#define MAX77620_ALARM2_HOUR_REG    0x17
+#define MAX77620_ALARM2_WEEKDAY_REG 0x18
+#define MAX77620_ALARM2_MONTH_REG   0x19
+#define MAX77620_ALARM2_YEAR_REG    0x1A
+#define MAX77620_ALARM2_DATE_REG    0x1B
+#define  MAX77620_RTC_ALARM_EN_MASK	(1 << 7)
+
+typedef struct _rtc_time_t {
+	u8  weekday;
+	u8  sec;
+	u8  min;
+	u8  hour;
+	u8  date;
+	u8  month;
+	u16 year;
+} rtc_time_t;
+
+void max77620_rtc_get_time(rtc_time_t *time);
+void max77620_rtc_stop_alarm();
+
+#endif /* _MFD_MAX77620_RTC_H_ */
--- a/bootloader/sec/tsec.c
+++ b/bootloader/sec/tsec.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 * Copyright (c) 2018 balika011
 *
 * This program is free software; you can redistribute it and/or modify it
@@ -97,15 +97,15 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 	}

 	//Load firmware or emulate memio environment for newer TSEC fw.
-	if (kb <= KB_FIRMWARE_VERSION_600)
+	if (kb == KB_FIRMWARE_VERSION_620)
+		TSEC(TSEC_DMATRFBASE) = (u32)tsec_ctxt->fw >> 8;
+	else
 	{
-		fwbuf = (u8 *)malloc(0x2000);
-		u8 *fwbuf_aligned = (u8 *)ALIGN((u32)fwbuf + 0x1000, 0x100);
+		fwbuf = (u8 *)malloc(0x4000);
+		u8 *fwbuf_aligned = (u8 *)ALIGN((u32)fwbuf, 0x100);
 		memcpy(fwbuf_aligned, tsec_ctxt->fw, tsec_ctxt->size);
 		TSEC(TSEC_DMATRFBASE) = (u32)fwbuf_aligned >> 8;
 	}
-	else
-		TSEC(TSEC_DMATRFBASE) = (u32)tsec_ctxt->fw >> 8;

 	for (u32 addr = 0; addr < tsec_ctxt->size; addr += 0x100)
 	{
@@ -116,7 +116,7 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 		}
 	}

-	if (kb >= KB_FIRMWARE_VERSION_620)
+	if (kb == KB_FIRMWARE_VERSION_620)
 	{
 		// Init SMMU translation for TSEC.
 		pdir = smmu_init_for_tsec();
@@ -174,45 +174,11 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 	//Execute firmware.
 	HOST1X(0x3300) = 0x34C2E1DA;
 	TSEC(TSEC_STATUS) = 0;
-	TSEC(TSEC_BOOTKEYVER) = tsec_ctxt->key_ver;
+	TSEC(TSEC_BOOTKEYVER) = 1; // HOS uses key version 1.
 	TSEC(TSEC_BOOTVEC) = 0;
 	TSEC(TSEC_CPUCTL) = TSEC_CPUCTL_STARTCPU;

-	if (kb <= KB_FIRMWARE_VERSION_600)
-	{
-		if (!_tsec_dma_wait_idle())
-		{
-			res = -3;
-			goto out_free;
-		}
-		u32 timeout = get_tmr_ms() + 2000;
-		while (!TSEC(TSEC_STATUS))
-			if (get_tmr_ms() > timeout)
-			{
-				res = -4;
-				goto out_free;
-			}
-		if (TSEC(TSEC_STATUS) != 0xB0B0B0B0)
-		{
-			res = -5;
-			goto out_free;
-		}
-
-		//Fetch result.
-		HOST1X(0x3300) = 0;
-		u32 buf[4];
-		buf[0] = SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB);
-		buf[1] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB);
-		buf[2] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB);
-		buf[3] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB);
-		SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB) = 0;
-		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB) = 0;
-		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB) = 0;
-		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB) = 0;
-
-		memcpy(tsec_keys, &buf, 0x10);
-	}
-	else
+	if (kb == KB_FIRMWARE_VERSION_620)
 	{
 		u32 start = get_tmr_us();
 		u32 k = se[SE_KEYTABLE_DATA0_REG_OFFSET / 4];
@@ -261,6 +227,40 @@ int tsec_query(u8 *tsec_keys, u8 kb, tsec_ctxt_t *tsec_ctxt)
 		// gfx_printf(&gfx_con, " dir:  %s\n", (errst >> 16) & 1 ? "W" : "R");
 		// gfx_printf(&gfx_con, " cid:  %02x\n", errst & 0xFF);
 	}
+	else
+	{
+		if (!_tsec_dma_wait_idle())
+		{
+			res = -3;
+			goto out_free;
+		}
+		u32 timeout = get_tmr_ms() + 2000;
+		while (!TSEC(TSEC_STATUS))
+			if (get_tmr_ms() > timeout)
+			{
+				res = -4;
+				goto out_free;
+			}
+		if (TSEC(TSEC_STATUS) != 0xB0B0B0B0)
+		{
+			res = -5;
+			goto out_free;
+		}
+
+		//Fetch result.
+		HOST1X(0x3300) = 0;
+		u32 buf[4];
+		buf[0] = SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB);
+		buf[1] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB);
+		buf[2] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB);
+		buf[3] = SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB);
+		SOR1(SOR_NV_PDISP_SOR_DP_HDCP_BKSV_LSB) = 0;
+		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_BKSV_LSB) = 0;
+		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_MSB) = 0;
+		SOR1(SOR_NV_PDISP_SOR_TMDS_HDCP_CN_LSB) = 0;
+
+		memcpy(tsec_keys, &buf, 0x10);
+	}

 out_free:;
 	free(fwbuf);
--- a/bootloader/sec/tsec.h
+++ b/bootloader/sec/tsec.h
@@ -22,7 +22,6 @@

 typedef struct _tsec_ctxt_t
 {
-	u32 key_ver;
 	void *fw;
 	u32 size;
 	void *pkg1;
--- a/bootloader/soc/clock.c
+++ b/bootloader/soc/clock.c
@@ -22,11 +22,11 @@
 /* clock_t: reset, enable, source, index, clk_src, clk_div */

 static const clock_t _clock_uart[] = {
-	/* UART A */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, 6,    0, 0 },
-	/* UART B */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, 7,    0, 0 },
-	/* UART C */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, 0x17, 0, 0 },
-	/* UART D */ { 0 },
-	/* UART E */ { 0 }
+/* UART A */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, 6,    0, 0 },
+/* UART B */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, 7,    0, 0 },
+/* UART C */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, 0x17, 0, 0 },
+/* UART D */ { 0 },
+/* UART E */ { 0 }
 };

 static const clock_t _clock_i2c[] = {
--- a/bootloader/soc/cluster.c
+++ b/bootloader/soc/cluster.c
@@ -25,8 +25,8 @@

 void _cluster_enable_power()
 {
-	u8 tmp = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO, tmp & 0xDF);
+	u8 tmp = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO); // Get current pinmuxing
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO, tmp & ~(1 << 5)); // Disable GPIO5 pinmuxing.
 	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, MAX77620_CNFG_GPIO_DRV_PUSHPULL | MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH);

 	// Enable cores power.
--- a/bootloader/soc/hw_init.c
+++ b/bootloader/soc/hw_init.c
@@ -1,6 +1,6 @@
 /*
 * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@@ -37,6 +37,7 @@
 #include "../utils/util.h"

 extern sdmmc_t sd_sdmmc;
+extern boot_cfg_t *b_cfg;

 void _config_oscillators()
 {
@@ -97,6 +98,9 @@ void _config_pmc_scratch()

 void _mbist_workaround()
 {
+	CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= (1 << 10); // Enable AHUB clock.
+	CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= (1 <<  6);  // Enable APE clock.
+
 	CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) | 0x8000) & 0xFFFFBFFF;
 	CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) |= 0x40800000u;
 	CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_CLR) = 0x40;
@@ -142,27 +146,31 @@ void _mbist_workaround()

 void _config_se_brom()
 {
-	// Bootrom part we skipped.
-	u32 sbk[4] = { 
-		FUSE(FUSE_PRIVATE_KEY0),
-		FUSE(FUSE_PRIVATE_KEY1),
-		FUSE(FUSE_PRIVATE_KEY2),
-		FUSE(FUSE_PRIVATE_KEY3)
-	};
-	// Set SBK to slot 14.
-	se_aes_key_set(14, sbk, 0x10);
+	// Skip SBK/SSK if sept was run.
+	if (!(b_cfg->boot_cfg & BOOT_CFG_SEPT_RUN))
+	{
+		// Bootrom part we skipped.
+		u32 sbk[4] = { 
+			FUSE(FUSE_PRIVATE_KEY0),
+			FUSE(FUSE_PRIVATE_KEY1),
+			FUSE(FUSE_PRIVATE_KEY2),
+			FUSE(FUSE_PRIVATE_KEY3)
+		};
+		// Set SBK to slot 14.
+		se_aes_key_set(14, sbk, 0x10);

-	// Lock SBK from being read.
-	SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 14 * 4) = 0x7E;
+		// Lock SBK from being read.
+		SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 14 * 4) = 0x7E;
+
+		// Lock SSK (although it's not set and unused anyways).
+		SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 15 * 4) = 0x7E;
+	}

 	// This memset needs to happen here, else TZRAM will behave weirdly later on.
 	memset((void *)TZRAM_BASE, 0, 0x10000);
 	PMC(APBDEV_PMC_CRYPTO_OP) = 0;
 	SE(SE_INT_STATUS_REG_OFFSET) = 0x1F;

-	// Lock SSK (although it's not set and unused anyways).
-	SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 15 * 4) = 0x7E;
-
 	// Clear the boot reason to avoid problems later
 	PMC(APBDEV_PMC_SCRATCH200) = 0x0;
 	PMC(APBDEV_PMC_RST_STATUS) = 0x0;
@@ -206,21 +214,30 @@ void config_hw()
 	i2c_init(I2C_1);
 	i2c_init(I2C_5);

-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, 0x40);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1, 0x78); // PWR delay for forced shutdown off.
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, MAX77620_CNFGBBC_RESISTOR_1K);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1,
+		(1 << 6) | (3 << MAX77620_ONOFFCNFG1_MRT_SHIFT)); // PWR delay for forced shutdown off.

-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0, 0x38);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1, 0x3A);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG2, 0x38);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO4, 0xF);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO8, 0xC7);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD0, 0x4F);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD1, 0x29);
-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD3, 0x1B);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0,
+		(7 << MAX77620_FPS_TIME_PERIOD_SHIFT));
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1,
+		(7 << MAX77620_FPS_TIME_PERIOD_SHIFT) | (1 << MAX77620_FPS_EN_SRC_SHIFT));
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG2,
+		(7 << MAX77620_FPS_TIME_PERIOD_SHIFT));
+	max77620_regulator_config_fps(REGULATOR_LDO4);
+	max77620_regulator_config_fps(REGULATOR_LDO8);
+	max77620_regulator_config_fps(REGULATOR_SD0);
+	max77620_regulator_config_fps(REGULATOR_SD1);
+	max77620_regulator_config_fps(REGULATOR_SD3);

-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_GPIO3, 0x22); // 3.x+
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_GPIO3,
+		(4 << MAX77620_FPS_TIME_PERIOD_SHIFT) | (2 << MAX77620_FPS_PD_PERIOD_SHIFT)); // 3.x+

-	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD0, 42); //42 = (1125000uV - 600000) / 12500 -> 1.125V
+	max77620_regulator_set_voltage(REGULATOR_SD0, 1125000);
+
+	// Fix GPU after warmboot for Linux.
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, 2);
+	i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO6, 2);

 	_config_pmc_scratch(); // Missing from 4.x+

--- a/bootloader/soc/pmc.h
+++ b/bootloader/soc/pmc.h
@@ -32,12 +32,16 @@
 #define  PMC_PWR_DET_SDMMC1_IO_EN (1 << 12)
 #define APBDEV_PMC_DDR_PWR 0xE8
 #define APBDEV_PMC_CRYPTO_OP 0xF4
+#define APBDEV_PMC_SCRATCH33 0x120
+#define APBDEV_PMC_SCRATCH40 0x13C
 #define APBDEV_PMC_OSC_EDPD_OVER 0x1A4
 #define APBDEV_PMC_RST_STATUS 0x1B4
 #define APBDEV_PMC_IO_DPD_REQ 0x1B8
 #define APBDEV_PMC_IO_DPD2_REQ 0x1C0
 #define APBDEV_PMC_VDDP_SEL 0x1CC
 #define APBDEV_PMC_DDR_CFG 0x1D0
+#define APBDEV_PMC_SCRATCH45 0x234
+#define APBDEV_PMC_SCRATCH46 0x238
 #define APBDEV_PMC_SCRATCH49 0x244
 #define APBDEV_PMC_TSC_MULT 0x2B4
 #define APBDEV_PMC_SEC_DISABLE2 0x2C4
--- a/bootloader/soc/t210.h
+++ b/bootloader/soc/t210.h
@@ -107,6 +107,8 @@
 #define APB_MISC_PP_STRAPPING_OPT_A 0x08
 #define APB_MISC_PP_PINMUX_GLOBAL 0x40
 #define APB_MISC_GP_LCD_BL_PWM_CFGPADCTRL 0xA34
+#define APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL 0xA98
+#define APB_MISC_GP_EMMC4_PAD_CFGPADCTRL 0xAB4
 #define APB_MISC_GP_WIFI_EN_CFGPADCTRL 0xB64
 #define APB_MISC_GP_WIFI_RST_CFGPADCTRL 0xB68

@@ -177,4 +179,8 @@
 #define  I2S_CG_SLCG_ENABLE (1 << 0)
 #define  I2S_CTRL_MASTER_EN (1 << 10)

+/*! Special registers. */
+#define EMC_SCRATCH0 0x324
+#define  EMC_SEPT_RUN (1 << 31)
+
 #endif
--- a/bootloader/storage/sdmmc_driver.c
+++ b/bootloader/storage/sdmmc_driver.c
@@ -143,8 +143,20 @@ static int _sdmmc_get_clkcon(sdmmc_t *sdmmc)
 static void _sdmmc_pad_config_fallback(sdmmc_t *sdmmc, u32 power)
 {
 	_sdmmc_get_clkcon(sdmmc);
-	if (sdmmc->id == SDMMC_4)
-		*(vu32 *)0x70000AB4 = ((*(vu32 *)0x70000AB4) & 0x3FFC) | 0x1040;
+	switch (sdmmc->id)
+	{
+	case SDMMC_1:
+		if (power == SDMMC_POWER_OFF)
+			break;
+		if (power == SDMMC_POWER_1_8)
+			APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x304; // Up: 3, Dn: 4.
+		else if (power == SDMMC_POWER_3_3)
+			APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x808; // Up: 8, Dn: 8.
+		break;
+	case SDMMC_4:
+		APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) & 0x3FFC) | 0x1040;
+		break;
+	}
 	//TODO: load standard values for other controllers, can depend on power.
 }

--- a/bootloader/utils/types.h
+++ b/bootloader/utils/types.h
@@ -51,4 +51,17 @@ typedef int bool;
 #define true  1
 #define false 0

+#define BOOT_CFG_AUTOBOOT_EN (1 << 0)
+#define BOOT_CFG_FROM_LAUNCH (1 << 1)
+#define BOOT_CFG_SEPT_RUN    (1 << 7)
+
+typedef struct __attribute__((__packed__)) _boot_cfg_t
+{
+	u8  boot_cfg;
+	u8  autoboot;
+	u8  autoboot_list;
+	u8  rsvd_cfg;
+	u8  rsvd[32];
+} boot_cfg_t;
+
 #endif
Author	SHA1	Message	Date
Kostas Missos	3b9bf65071	Bump version to v4.8	2019-02-24 03:09:07 +02:00
Kostas Missos	50d4cbbda1	[sept] Auto update sept payload via update.bin This will check if payload.bin is the same version with update.bin	2019-02-24 03:04:28 +02:00
Kostas Missos	f911fab9f2	[7.0.0-7.0.1] Add full support via Atmosphere's sept	2019-02-24 03:03:17 +02:00
Kostas Missos	aae7689bf5	[7.0.0] Initial support	2019-02-24 02:58:15 +02:00
Kostas Missos	7d908c9ac5	[hos] Support new mailbox and refactor a little bit	2019-02-24 02:54:32 +02:00
Kostas Missos	2fb37db707	[Boot Config] Add HOS reboot to config This storage allows you to reboot from HOS to the selected ini boot entry. In the future it will be used for far more.	2019-02-24 02:43:13 +02:00
Kostas Missos	c8052e5b50	[exosphere] Support for new exo config	2019-02-24 02:34:04 +02:00
Kostas Missos	de830df7e7	Add automatic NOGC based on fuses burnt Auto NoGC: 0: Force disable, 1: Auto (checks fuses and fw version) And also remove customlogo. It's redudunt.	2019-02-24 01:06:24 +02:00
Kostas Missos	04907e2823	Bug fixes and refactoring - Info tools - Tools - Tsec - Many more	2019-02-24 00:59:33 +02:00
Kostas Missos	4f5fcf9fbd	[config + ini] Refactor and fix bugs	2019-02-24 00:35:24 +02:00
Kostas Missos	ec890c7c97	[PMIC] Refactoring	2019-02-16 01:23:14 +02:00
Kostas Missos	4f2bbbf101	Fix GPU on Linux when booting from warmboot	2019-02-12 00:46:06 +02:00
Kostas Missos	b677d6cad3	Add max77620-rtc driver & disable alarm on shut off	2019-02-12 00:45:27 +02:00
Kostas Missos	b3f8961e45	Fix sleep with 6.X.X secmon when debug mode is on	2019-02-12 00:42:22 +02:00
Kostas Missos	2f37811aba	Normalize brom patches & add sd autocalib fallback	2019-02-12 00:40:40 +02:00
Kostas Missos	5cd596e53c	Add SVC generic patches First patch allows same process on svcControlCodeMemory	2019-02-12 00:36:24 +02:00
Kostas Missos	4ae42c3a9d	Small fixes and whitespace Additionally make info functions smaller and show available fuses.	2019-02-12 00:34:35 +02:00
Kostas Missos	e105634b0d	Proper warmboot exploit impl and documentation Side effect: Fixed a bug where the dumped patched bootrom had the warmboot exploit patch Co-Authored-By: Balázs Triszka <balika011@gmail.com>	2018-12-17 21:10:13 +02:00