CTCaer
b8dcd5a05b
hekate: adjust for ianos changes
2026-03-27 19:38:45 +01:00
CTCaer
f155346238
bdk: ianos: restructure for future expansion
2026-03-27 19:38:08 +01:00
CTCaer
f08557fb8f
modules: lp0: refactor t210b01 to use the macros
...
This actually makes it faster too.
Additionally, remove support for DDR in T210 function.
2026-03-27 19:36:58 +01:00
CTCaer
c69cdacf30
l4t: use the updated pmc defines/struct
2026-03-27 19:36:58 +01:00
CTCaer
b3c95990ed
bdk: pmc: refactor register defines and structs
2026-03-27 19:36:58 +01:00
CTCaer
b86701823c
bdk: pinmux: always detach I2C4 pins from I2C3 pm
...
Generally I2C3 communication can work via I2C3 or I2C4 pins.
Defaults are fine as long as one of the pin groups are floating or grounded or
both share I2C traces.
In NX boards I2C4 SDA is used for GC and connected to 1V8.
So if a GC is slotted, I2C3 works, if not, no communication is possible.
This config was done previously inside I2C3 consumer driver (touchscreen).
Now it's moved inside pinmux_config_i2c.
2026-03-27 19:36:58 +01:00
CTCaer
9fe3ac7589
Bump hekate to v6.5.1 and Nyx to v1.9.1
2026-03-27 10:02:21 +01:00
CTCaer
315457651c
bdk: joycon: make init stricter but relax timings
...
Additionally, if both Joy-Con are found, try to send rumble simultaneously.
2026-03-27 10:02:21 +01:00
CTCaer
aecd657358
bdk: display: reduce display off waiting time
...
And align oled panel inside vblank.
Assumes display deinit happens before the rest of deinit.
2026-03-27 10:02:21 +01:00
CTCaer
ef84b9804c
nyx: handle exFAT truncation in stat/backup
...
It's possible for the overflow check to fail if exFAT and file size is big enough.
(4GB + total_size)
So check it properly.
This avoids unnecessary copying before RAM disk gets filled and copy errors out.
No other check is needed since max capacity is RAM disk size.
2026-03-27 10:02:21 +01:00
CTCaer
16b14b74c2
nyx: constrain reboot to OFW a bit
...
Disable if T210 and real dram id is 7 since this will fatal nx bootloader.
If T210B01 and fake id is dual rank and higher density than real id, show a warning.
Booting HOS like that can cause performance degradation and sometimes crashes.
How worse it is, depends on ram chips and selected unmatched config.
2026-03-27 10:02:21 +01:00
CTCaer
925b6e22bb
bdk: se: add T210 SHA256 silicon errata WAR
...
Apparently, some T210 silicon have an undocumented errata where the MSG_LEFT2/3
registers are not ignored as they should.
When they have random data in POR they cause a hang as long as the message and
SHA calculation speed. So always clear them.
Additionally, clear MSG_LENGTH2/3 registers too even though they do not matter.
2026-03-27 10:02:21 +01:00
CTCaer
5a35a61753
bdk: se: adjust T210 silicon errata coherency WAR
...
Add a 15us worst case scenario delay after OP done for T210.
Practically, because of 1600 MHz RAM, less than 1us delay is needed.
(204 MHz: 15us, 408 MHz: 5us, etc).
2026-03-27 10:02:21 +01:00
CTCaer
e649d1df8e
bdk: se: correct result for < block size aes
2026-03-27 10:02:21 +01:00
CTCaer
154d8b114c
hos: store wb anyway even if unused
...
Partially reverts 73d96b7ca8bd4360b288e53d95295fd98d1655e5.
This should be completely removed at some point.
2026-03-27 10:02:21 +01:00
CTCaer
a8d3018e83
hos: refactor ctr/hash vars in pkg2 header
2026-03-27 10:01:38 +01:00
CTCaer
ef2247a3f0
Bump hekate to v6.5.0 and Nyx to v1.9.0
2026-03-27 10:01:21 +01:00
CTCaer
0f4636546c
hos: add 21.2.0 support
2026-03-27 10:01:20 +01:00
CTCaer
22dd1a42c7
hekate/nyx: remove coreboot support
...
Everything external is finally updated and beyond parity with old things that needed it.
2026-03-27 10:01:20 +01:00
CTCaer
4daa02fe85
bdk: hwinit: remove coreboot support
...
Everything external is finally updated and beyond parity with old things that needed it.
2026-03-27 10:00:26 +01:00
CTCaer
8c8ca53ab7
bdk: joycon: more refactoring
2026-03-27 10:00:26 +01:00
CTCaer
e6a3c80f4d
bdk: joycon: generalize _jc_packet_add_uart_hdr
...
Correct its header construction in case it's used in the future.
Plus some unhardcoding of lengths.
2026-03-27 10:00:26 +01:00
CTCaer
2a0617dbf6
bdk: joycon: increase connection timeout to 1.8s
2026-03-27 10:00:26 +01:00
CTCaer
690beb0de7
bdk: joycon: refactor some fields
...
And add better comments.
2026-03-27 10:00:26 +01:00
CTCaer
6bcc2e082f
bdk: joycon: use packed structs and bitfields
2026-03-27 10:00:26 +01:00
CTCaer
c605e924ed
bdk: joycon: correct crc8 offsets
...
By luck the current offset and length of the calculation always worked.
Correct it though because the function might be used fully in the future.
2026-03-27 10:00:26 +01:00
CTCaer
d252dd7e52
bdk: joycon: maintain consistent naming styles
2026-03-27 10:00:26 +01:00
CTCaer
2d3b6e1a39
nyx: always show console stats
...
When main Joy-Con or all are disconnected, always show Joy-Con debug info.
Additionally, always allow opening/closing console window with the secondary one,
in the same conditions.
2026-03-27 10:00:26 +01:00
CTCaer
b414e6b35f
nyx: make sure ram is set to 1600 MHz
...
No matter how Nyx was launched.
2026-03-27 10:00:26 +01:00
CTCaer
1651316f72
nyx: options: make sure var has a value in all -O#
2026-03-27 10:00:26 +01:00
CTCaer
c200ef3f4a
bdk: joycon: optimize rumble enable
2026-03-27 10:00:26 +01:00
CTCaer
5fe649d7dd
bdk: display: add OLED status pin
...
Code is commented out for now until it gets used.
Status is set when RST is enabled.
2026-03-27 10:00:26 +01:00
CTCaer
d5a1bdf9bf
nyx: update rng calls based on new bdk
2026-03-27 10:00:26 +01:00
CTCaer
8e2a776e73
bdk: se: support multiple/partial blocks for RNG
2026-03-27 09:59:42 +01:00
CTCaer
57e6875b42
hekate/nyx: update ctx keys calls based on new bdk
2026-03-27 09:59:42 +01:00
CTCaer
d0dcfd0008
bdk: se: use proper naming for ctx keys
2026-03-27 09:59:42 +01:00
CTCaer
0cd9a5c80e
hekate/nyx: update sha calls based on new bdk
2026-03-27 09:59:42 +01:00
CTCaer
a258c726dc
bdk: se: refactor and optimize SHA256
...
- Simplify config and fix partial hashing
- Add partial function calls
- All partial state is handled internally
- All functions now use the classic naming convention.
2026-03-27 09:59:42 +01:00
CTCaer
89795a4c96
bdk: se: use classic naming convention for XTS
2026-03-27 09:59:42 +01:00
CTCaer
5a40f26010
bdk: se: add AES OFB encryption/decryption support
2026-03-27 09:59:42 +01:00
CTCaer
ab794bc61d
hekate/nyx: update aes calls based on new bdk
2026-03-27 09:59:42 +01:00
CTCaer
6c7370bec3
bdk: se: remove dst/src size argument requirement
...
All operations expect the destination buffer to fit the selected size.
And for simplicity STATE_WAIT is not supported.
Additionally, remove single block ECB and just use the normal function.
2026-03-27 09:59:42 +01:00
CTCaer
ba71fb0dba
bdk: se: optimize and update aes cmac hashing
...
`se_aes_cmac_128` was also renamed to `se_aes_hash_cmac`.
By following the convention of 128bit functions not having size in their name.
2026-03-27 09:59:42 +01:00
CTCaer
d1066da9fa
bdk: se: handle original and updated IV in one go
...
IV set now requires a size where the second block is updated IV
IV clear now clears both.
2026-03-27 09:59:42 +01:00
CTCaer
542fba6fbd
bdk: se: support partial blocks for all aes modes
2026-03-27 09:59:42 +01:00
CTCaer
1295152f20
bdk: se: do a trivial refactor pass
2026-03-27 09:59:42 +01:00
CTCaer
9ebd03802f
bdk: heap: use ultra fast defragmentation
...
The defragmentation runs on every free and it only merges subsequent nodes.
So there's no point of looping all nodes.
So, just check if previous and next nodes are mergeable.
This makes free performant and achieves the same exact functionality.
2026-03-27 09:59:42 +01:00
CTCaer
07229f1002
Restructure and refactor makefiles
...
- Allow rebuilds without rebuilding everything
By detecting changes everywhere that matters (flags, objects and headers).
- Add progress bar
- Fully clean everything when clean goal is used
2026-03-27 09:59:42 +01:00
CTCaer
d391ef3b0f
bdk: max17050: simplify calculations
...
And make current readings a tiny bit (±0.16%) more accurate.
2026-03-27 09:58:48 +01:00
CTCaer
18a3dd6374
nyx: add joycon charging debug info
2026-03-27 09:58:48 +01:00
CTCaer
8a25c8294f
minerva: update rate_from if clock the same
2026-03-27 09:58:48 +01:00
CTCaer
9ef684037b
bdk: max17050: remove unused cached batt voltage
2026-03-27 09:58:48 +01:00
CTCaer
19279fa57d
bdk: joycon: improve charger config
...
Utilize charger config set command which allows for supplement mode.
Additionally, remove ping config when SIO and parse buttons/sticks on subcmd reports.
2026-03-27 09:58:48 +01:00
CTCaer
0edd5295d6
fatfs: set default date to 1/1/2026
2026-03-27 09:58:48 +01:00
CTCaer
992245f044
l4t: make mselect config common for t210/t210b01
...
It's already handled in soc powerdown exit in ATF but it doesn't hurt to have it generally.
2026-03-27 09:57:59 +01:00
CTCaer
2004b38f41
bdk: ccplex: do not disable mselect on cpu pwrgate
2026-03-27 09:57:59 +01:00
CTCaer
64a4f9db16
hekate/nyx: remove last calloc references
2026-03-27 09:57:59 +01:00
CTCaer
8220466523
bdk: heap: add more safe guards
...
- Use magic for used regions
- Deduplicate calloc
Enable a print/abort in _heap_free() for debugging.
2026-03-27 09:57:59 +01:00
CTCaer
d379a17444
bdk: display: improve and deduplicate more
...
- Add delay after a DSI soft reset
- Remove more duplicated configs
- Improve code to save code size
- Improve comments
- Do not allow display_backlight to be used with OLED
2026-03-27 09:57:59 +01:00
CTCaer
db4c6a0b69
bdk: util: use volatile base for reg_write_array
2026-03-27 09:57:59 +01:00
CTCaer
8b86bf3808
bdk: display: use a scratch reg for backlight
...
Spare registers normally have hidden hw config usage, so avoid them just in case.
2026-03-27 09:57:59 +01:00
CTCaer
46fa18be89
bdk: display: simplify macros
...
Expand register index in parent macro and remove _DI/_DSIREG macros.
2026-03-27 09:57:59 +01:00
CTCaer
c17881f2c3
bdk: display: use spare reg to store dcs bl duty
...
And also remove backlight pwm restoring from coreboot hw deinit path.
2026-03-27 09:57:59 +01:00
CTCaer
c907d143b7
bdk: fatfs: improve fat read/write
...
- Convert access from min cluster size to block size
Also allow read/writes to less than cluster size
- In case of intercluster access throw an error
- Do not error on zero size
On reads buffer still needs to be block (instead of cluster) aligned.
On writes, buffer still needs to be readable out of bounds.
2026-03-27 09:57:59 +01:00
CTCaer
a8db6470ea
nyx: info: update 20nm wafer bounds
2026-03-27 09:57:59 +01:00
CTCaer
e50a7c8bfd
nyx: info: unlocked T210B01 fuses dumping support
2026-03-27 09:57:59 +01:00
CTCaer
ffc0aa2c3d
bdk: fuse: return array size with fuse_read_array
2026-03-27 09:57:23 +01:00
CTCaer
bb20eabea2
nyx: parted: remove invisible btns in eMMC mode
2026-03-27 09:57:23 +01:00
CTCaer
330b463110
nyx: add a small stall in lvgl loop
...
EMC CC should not run in less than 20us.
2026-03-27 09:56:31 +01:00
CTCaer
4af99c9f78
hos/l4t: deduplicate sc7exit-b01 load
...
And remove obsolete MWS (L4T one deprecated it 3 years ago).
2026-03-27 09:56:31 +01:00
CTCaer
4c2f8f14dc
hos: reflect minerva changes
2026-03-27 09:55:59 +01:00
CTCaer
fd8c2ef56d
lp0 cfg: use a more appropriate entry name
2026-03-27 09:55:12 +01:00
CTCaer
6b66b7f079
minerva: update tov1.6_T210/v0.1_T21X
...
T21X v0.1:
- Add IRB/no table support
T210 v1.6/Common:
- Add a proper table for 8GB T210 config instead of editing a 4GB one
- Increase timeout to 2ms
- Generally improve checks and guard against unknown SoCs/SKUs
- Remove the long ago obsolete OVERCLOCK_FREQ/OVERCLOCK_VOLTAGE ifdefs
2026-03-27 09:55:12 +01:00
CTCaer
76922b7b87
bdk: minerva: add IRB support
...
Aka no table support.
2026-03-27 09:55:12 +01:00
CTCaer
2bc4000acc
hekate: gfx: correct a very very very old typo
2026-03-27 09:55:12 +01:00
CTCaer
892dba3a71
hekate: exo: simplify fatal screen to save space
...
And remove an obsolete message.
2026-03-27 09:55:12 +01:00
CTCaer
851bf05841
hekate: remove precise free clusters calc in TUI
2026-03-27 09:55:12 +01:00
CTCaer
03cb1aac29
bdk: clock: update some defines
2026-03-27 09:54:06 +01:00
CTCaer
61cb77a016
bdk: sdmmc: add defines for max block number
2026-03-27 09:54:06 +01:00
CTCaer
facd5c9ae9
Bump hekate to v6.4.2 and Nyx to v1.8.2
2026-03-27 09:53:33 +01:00
CTCaer
5c04530bfc
nyx: options: add month/date checks for roller
...
Now the roller will return back automatically if day can't be set for selected month.
Additionally, fix the check when saving.
2026-03-27 09:53:33 +01:00
CTCaer
ef5033fb0e
nyx: info: add wafer graph with die x/y placement
2026-03-27 09:53:33 +01:00
CTCaer
952a7e8aa2
nyx: info: streamline hw info from fuses
...
- Compact and group relevant values together
- Use actual value name instead of register name where possible
- Fix LOT code masking
- Fully parse and show LOT code (it's the same marking on die)
- Correct X coordinate parsing (9bit 2s complement)
- Add product code
2026-03-27 09:53:33 +01:00
CTCaer
4430833d28
hekate: write rsvd cfg to update.bin if different
2026-03-27 09:53:33 +01:00
CTCaer
3af536f954
nyx: do init always with lowest clock boost
2026-03-27 09:52:34 +01:00
CTCaer
5bc98c4b19
nyx: fix bt pairing dumping
2026-03-27 09:52:34 +01:00
CTCaer
2b353c1336
nyx: info: add forced 8GB ram info
2026-03-27 09:52:34 +01:00
CTCaer
32c374aff5
hekate: show errors before parsing R2C
2026-03-27 09:52:34 +01:00
CTCaer
1af22f6c45
hekate: add force 8GB ram config mode
2026-03-27 09:52:34 +01:00
CTCaer
4b796ab63f
loader/hekate/nyx: utilize the new rsvd cfg
2026-03-27 09:52:34 +01:00
CTCaer
8d525a3c50
bdk: add reserved cfg to ipl meta and nyx storage
2026-03-27 09:51:47 +01:00
CTCaer
ef0ab0b0f1
bdk: sdmmc: correct drive ohms comment
2026-03-27 09:51:47 +01:00
CTCaer
7b7906efc2
bdk: clock: add i2c to the errata affected list
2026-03-27 09:51:47 +01:00
CTCaer
e29d139946
bdk: fuse: allow overriding dram id fuses
...
This should be set before running sdram init.
fuse_read_dramid(true) will still return the real id.
2026-03-27 09:51:47 +01:00
CTCaer
cfcbb62768
hekate/nyx: use minerva storage and panel id
2026-03-27 09:51:47 +01:00
CTCaer
b862311c0c
bdl: minerva: add deinit function
...
Removes dependency to Nyx storage for hw init too.
2026-03-27 09:51:46 +01:00
CTCaer
11b49e3bbc
bdk: nyx: rename disp_id to panel_id
2026-03-27 09:51:46 +01:00
CTCaer
ac245a0b6f
bdk: minerva: remove dependency to Nyx storage
...
minerva_str_t must be used now and passed directly to minerva_init.
2026-03-27 09:51:46 +01:00
CTCaer
c0300b1cee
bdk: display: remove dependency to Nyx storage
...
display_get_verbose_panel_id should now be used to get the full panel id.
2026-03-27 09:51:46 +01:00
CTCaer
1eaa801d6a
bdk: bpmp: add write commits
...
And deduplicate bpmp_clk_rate_relaxed in bpmp_clk_rate_set.
2026-03-27 09:51:46 +01:00