CTCaer
3c6bb75267
bdk: small refactoring
2025-05-13 16:17:31 +02:00
CTCaer
169c551445
bdk: display: update color mode definitions
2025-05-13 16:17:18 +02:00
CTCaer
7dad628dfc
hos: update some comments
...
And remove unneeded checks.
2025-05-13 16:17:10 +02:00
CTCaer
8ba90ae55f
nyx: info: consider FST2 touch panel unknown
2025-05-13 16:16:58 +02:00
CTCaer
fe61c1a374
nyx: info: validate A2 support
...
Show info about A2 support.
Color coded A2 list:
White: No support
Green: Fully supported
Yellow: CMDQ/Cache needs a quirk
Red: Broken
2025-05-13 16:16:53 +02:00
CTCaer
3412714402
bdk: sdmmc: add extention regs read/parse
2025-05-13 16:16:45 +02:00
CTCaer
2b0591e2b0
bdk: utils: added qsort compare functions
...
int qsort_compare_int(const void *a, const void *b);
int qsort_compare_char(const void *a, const void *b);
int qsort_compare_char_case(const void *a, const void *b);
2025-05-13 16:16:30 +02:00
CTCaer
03b30a23c4
nyx: info: fully update sdmmc benchmark
...
- Changed to relevant A2 spec testing sizes
- Added 95th and 5th percentile IOPS for random test
Standard numbers in the industry and also helps with pinpointing latency issues
- Size of info and benchmark adjusted so important info underneath is still showing
- Refactored
2025-05-13 16:16:24 +02:00
CTCaer
4f0bba605f
nyx: info: use a more advanced ram detection
2025-05-13 16:15:51 +02:00
CTCaer
4cfbef5062
nyx: info: use custom action for hw info window
2025-05-13 16:15:35 +02:00
CTCaer
02281fccf1
fatfs: set default year to 2025
2025-05-13 16:14:54 +02:00
CTCaer
84078e5469
l4t: allow SLD type to be changed or disabled
2025-05-13 16:14:28 +02:00
CTCaer
805686105d
l4t: remove unchanged carveout config clear
...
Also allow wrong dram types to be mapped for T210B01.
The default table used is 0.
2025-05-13 16:14:11 +02:00
CTCaer
eacb4f2844
pkg2: fix ini size when not using mesosphere
...
Important in case the same ini1 space is used and stock kernel is new.
Additionally, also set the hash for the 3rd section, even if empty.
2025-05-13 16:13:49 +02:00
CTCaer
c8da71229a
hos: config: exit the loop after matching cfg key
2025-05-13 16:13:06 +02:00
CTCaer
1a157a33f6
hos: rename atmosphere key to kernelprocid
...
So it reflects what it does.
2025-05-13 16:12:46 +02:00
CTCaer
f093c9368b
hos: small refactor
...
Also exiting hos_launch is considered always an error.
2025-05-13 16:12:10 +02:00
CTCaer
9a755b895b
bdk: dirlist: switch to alphabetical ordering
2025-05-13 16:11:20 +02:00
CTCaer
4c4a63795e
bdk: sdmmc: refactor error checking on rw
...
And also check if card status is ok after a read/write.
2025-05-13 16:11:13 +02:00
CTCaer
04dc8d2a86
bdk: sdmmc: check that cmd timed out if SDSC
...
Instead of assuming that, check it.
This fix will make SDUC not to be assumed as SDSC.
2025-05-13 16:10:59 +02:00
CTCaer
ed4b638545
bdk: sdmmc: update unstuff_bits to use mod
...
Since unstuff_bits only supports 128bits, instead of subtracting the correct amount of bits with the offset array, use % 128.
2025-05-13 16:10:48 +02:00
CTCaer
a8a67ee775
nyx: info: use renamed sd storage member
2025-05-13 16:10:27 +02:00
CTCaer
1e54d538fd
bdk: sdmmc: small refactor
2025-05-13 16:10:13 +02:00
CTCaer
20487cb8b9
bdk: sdmmc: check for out bounds access
2025-05-13 16:09:06 +02:00
CTCaer
8bc14f1043
bdk: ff: check for cltbl malloc success
2025-05-13 16:08:53 +02:00
CTCaer
c8acea7ad5
bdk: se: remove malloc usage
2025-05-13 16:08:42 +02:00
CTCaer
3ea4fd81f7
bdk: display: remove malloc usage
2025-05-13 16:08:21 +02:00
CTCaer
3250b2e32a
Bump hekate to v6.2.2 and Nyx to v1.6.4
2024-10-12 17:51:00 +03:00
CTCaer
e3eee73318
nyx: do not spam log on partition restore
2024-10-12 17:50:54 +03:00
CTCaer
81fb318f6b
hos: add 19.0.0 support
2024-10-11 13:04:16 +03:00
CTCaer
84f3f7d92a
nyx: add 400us sleep in lv task loop
...
Tiny power save.
2024-10-10 18:28:29 +03:00
CTCaer
788ecb60a3
l4t: bump api to 7
2024-10-10 18:26:19 +03:00
CTCaer
14413ae6bd
bdk: timer: restore rtc timer spinlock
2024-10-10 18:22:03 +03:00
CTCaer
1849ac6667
nyx: optimize battery info
...
- Remove input voltage limit
- Add an extra PD profile
2024-10-10 15:21:32 +03:00
CTCaer
1bec721baf
hos: add missing deinit
2024-10-10 15:21:32 +03:00
CTCaer
6fa844b031
hekate/nyx: use updated dirlist
2024-10-09 15:22:16 +03:00
CTCaer
d2fc6379c6
bdk: utils: improve dirlist
...
Stop doing unnecessary copies during reordering and use pointers for that.
2024-10-09 15:14:44 +03:00
CTCaer
f15af01727
readme: explain what stock basically is even more
2024-10-09 15:10:23 +03:00
CTCaer
69acef4db3
nyx: part manager: change GPT partition colour
...
Since many confuse that on MBR
2024-10-04 22:19:01 +03:00
CTCaer
cdc1012f50
nyx: part manager: add version on android button
...
Check partition scheme for android and add the version on the flash button
2024-10-04 22:18:20 +03:00
CTCaer
63c4bdd7d9
nyx: no need to double check for errors
2024-10-04 22:16:36 +03:00
CTCaer
0e23d0e0fd
nyx: name button list object appropriately
2024-10-04 22:14:51 +03:00
CTCaer
9463f8aa7d
nyx: fix memleak when 10 launcher items are shown
2024-10-04 22:14:23 +03:00
CTCaer
34f8692f5c
nyx: do not use global cal0 buf name
2024-10-04 22:12:53 +03:00
CTCaer
9da5149394
minerva: correct init done type
2024-10-04 22:11:41 +03:00
CTCaer
75676a78ff
hos: secmon name ini lists properly
2024-10-04 22:10:50 +03:00
CTCaer
66454b934c
hos: no need to double check allocated eks
2024-10-04 22:09:54 +03:00
CTCaer
7b60c3d162
hekate/nyx: constify more args
2024-10-04 22:09:06 +03:00
CTCaer
c422d63b64
hekate: tools: fix menu memleak
2024-10-04 22:04:56 +03:00
CTCaer
0acdefb32a
hekate: info: remove input voltage limit
...
It's a useless metric and in HOS it's used incorrectly.
2024-10-04 22:02:34 +03:00
CTCaer
edf00d8e51
bdk: bpmp: add state set function
...
Some states are controlled via software. So add a function for that.
2024-10-04 21:54:58 +03:00
CTCaer
1a98e3a702
bdk: irq: disable irq if handler error
2024-10-04 21:53:17 +03:00
CTCaer
8bf3bee08b
bdk: uart: fix fifo clear
...
- Do not clear fifo for everything if not needed
- Correct fifo clear checks
2024-10-04 21:52:24 +03:00
CTCaer
f2be59888b
bdk: add irq header to bdk header
2024-10-04 21:48:44 +03:00
CTCaer
5c77601f7a
bdk: ums: always allow finish reply
...
Parse scsi cmd failures are handled internally.
2024-10-04 21:47:26 +03:00
CTCaer
9e239df39e
bdk: constify various args
2024-10-04 21:45:57 +03:00
CTCaer
b1bc6ebdd8
bdk: joycon: utilize packet id per joycon
...
Also fix a possible infinite loop
2024-10-04 21:39:35 +03:00
CTCaer
5c39d04ca2
Bump hekate to v6.2.1 and Nyx to v1.6.3
2024-07-02 19:02:46 +03:00
CTCaer
85cd26e305
l4t: update loader to v6
...
- Move TZ parameters to a static address inside TZDRAM
- Update fw rev for new ARC
- Refactor context and parameters into a single struct
2024-07-02 18:37:15 +03:00
CTCaer
6c601ccaa5
hekate: reinstate charger enable
...
Add back charger enable on boot, inside low battery check.
It will be kept as is since there's the following case that addresses:
OTG mode and shut off will not restore charger mode.
2024-07-02 18:32:16 +03:00
CTCaer
0aea402632
Add rel versioning and adjust accordingly
2024-07-02 18:29:39 +03:00
CTCaer
280ebcc1e6
nyx: refactor hw info to provide more SKU data
2024-07-02 18:06:32 +03:00
CTCaer
106a08f19c
hos: rename function
2024-07-02 18:04:52 +03:00
CTCaer
aacae78420
nyx: partition manager error message improvement
...
Inform user that there's an issue with bootloader folder when a partial backup is done during partitioning.
2024-07-02 18:04:09 +03:00
CTCaer
716cfbfbaf
bdk: sdram: refactor init
2024-07-02 18:02:05 +03:00
CTCaer
e47b6ec19b
bdk: hwinit: display changes
...
Do not display ldo0 if enabled here as it's not needed.
Make sure PLLP_OUTB is properly reset in case of coming out of warmboot.
2024-07-02 17:59:14 +03:00
CTCaer
acb3997a7d
bdk: hwinit: reorder no io power
...
And make sure sdmmc iopower is not enabled after vdd disable.
2024-07-02 17:56:20 +03:00
CTCaer
4c5cc6d567
bdk: display: small refactor
2024-07-02 17:52:12 +03:00
CTCaer
c321d3508c
Bump hekate to v6.2.0 and Nyx to v1.6.2
2024-06-11 12:41:19 +03:00
CTCaer
66303d0d47
hos: reinstate host1x disable
2024-06-11 12:41:13 +03:00
CTCaer
80b3651d0a
nyx: correct touch fw id display
2024-06-11 09:08:33 +03:00
CTCaer
242debfe3e
modules: use echo -e for newline prints
2024-06-11 09:04:21 +03:00
CTCaer
68408bbb79
hos: add 18.1.0 support
2024-06-11 08:59:45 +03:00
CTCaer
cf954b451c
hekate: refactor of main
...
- Remove unused function
- Rename some functions and make them static
- Reorder freeing of menu entries
2024-06-10 16:25:50 +03:00
CTCaer
75a4a8ba1d
bdk: sdmmc: remove higher power limits
...
UHS-I Cards force a max of 1.44W even if higher modes are selected.
This does not change functionality, so remove them as unused.
2024-06-10 13:37:28 +03:00
CTCaer
a37b5c7841
bdk: sdmmc: no need to raise power limit for HS25
2024-06-10 13:24:07 +03:00
CTCaer
48334779a5
bdk: sdmmc: error reporting changes
...
- Correct transfer error message
- Add debug print for deinit
2024-06-08 17:41:11 +03:00
CTCaer
054c68f251
bdk: hwinit: power on all relevant rails
...
Since that doesn't happen via sdram init anymore, do it in hwinit.
It only matters if we came out of warmboot.
2024-06-08 12:21:15 +03:00
CTCaer
655209bedc
bdk: sdram: keep sdmmc1 no iopower state
2024-06-08 12:19:24 +03:00
CTCaer
85eb5489fe
bdk: pmc: rename io/det power defines
2024-06-08 12:16:07 +03:00
CTCaer
11262c2112
nyx: adhere to fan driver changes
2024-06-07 17:15:27 +03:00
CTCaer
8b4f776c9d
bdk: fan: rename functions and add set from temp
...
- Rename functions to proper style (drivername_)
- Add fan_set_from_temp for managing the fan with passed SoC temperature.
2024-06-07 17:14:05 +03:00
CTCaer
a34206df5b
bdk: sdmmc: small changes
...
- Log warning for comp pad calibration timeout
- Rename some func/defines
- Increase SDMMC1 power disable wait to 10ms
No real perceived functionality change.
2024-06-07 17:09:30 +03:00
CTCaer
4a24fe0b35
bdk: display: add useful functions
...
- Window disable
- Window framebuffer address set
- Window framebuffer move to new address
2024-06-06 06:27:30 +03:00
CTCaer
14c482ddce
bdk: display: remove max77620 gpio 7 enable
...
It is actually not used at all.
So do not configure it to save power.
2024-06-05 15:20:27 +03:00
CTCaer
8d49bc3c33
bdk: hwinit: move LDO8 init in regulators init
...
And also reorder it above I2C1 init (because of HOAG).
2024-06-05 01:35:05 +03:00
CTCaer
39c614a3ab
bdk: hwinit: move sd2 to hw init
...
SD2 powers LDO0/1/8 on T210B01 so there's no need to be in display init.
Also there's not need to power it down first so configure it in one go.
2024-06-05 01:33:15 +03:00
CTCaer
7652d9cdb1
bdk: display: use mipi cal sw war on T210 also
...
As per Nvidia, the pad brick separates clock and data terminations.
This necessitates doing the calibration twice.
Nvidia/Nintendo probably never updated that part on T210 since it's from around
2015/2016. T210B01 is based on 2017 codebase so it has it.
HOS (nvservices, not boot) is probably updated to also do that.
If not, then they should fix it.
There are 0 known issue reports with that on T210, but well.
2024-06-05 01:11:04 +03:00
CTCaer
21d782587f
hekate/nyx: adhere to display function renames
2024-06-05 01:03:46 +03:00
CTCaer
48ef1826e9
bdk: display: rename functions
...
display_init_framebuffer_pitch -> display_init_window_a_pitch
display_init_framebuffer_pitch_vic -> display_init_window_a_pitch_vic
display_init_framebuffer_pitch_inv -> display_init_window_a_pitch_inv
display_init_framebuffer_block -> display_init_window_a_block
display_init_framebuffer_log -> display_init_window_d_console
display_activate_console -> display_window_d_console_enable
display_deactivate_console -> display_window_d_console_disable
display_init_cursor -> display_cursor_init
display_set_pos_cursor -> display_cursor_set_pos
display_deinit_cursor -> display_cursor_deinit
2024-06-05 01:00:58 +03:00
CTCaer
4fef1890aa
bdk: rename exec_cfg to reg_write_array
...
And cfg_op_t to reg_cfg_t.
2024-06-05 00:49:15 +03:00
CTCaer
320b91a767
bdk: display: return duty for oled panel properly
...
For display_get_backlight_brightness.
2024-06-02 08:23:58 +03:00
CTCaer
c5f6837c35
bdk: display: wait 1 frame after display off cmd
2024-06-02 08:23:13 +03:00
CTCaer
72f980d0f4
bdk: display: fully streamline dc/win setup
...
As explained before, Nvidia just grabbed the whole dynamic init and made arrays
of it, without actually optimizing it.
The second part of the streamline aims to fully de-duplicate that.
- Completely remove all already set registers for DC/DISP/WIN.
- Do not touch other windows when a specific window is setup.
- Init Window D also together with A/B/C since code is made for DISPA.
- Add missing increase for syncpt 1.
2024-06-02 08:22:20 +03:00
CTCaer
b3be7e7a41
bdk: display: use the same HS exit threshold
...
No need to use minimum on T210.
Use the same byte clocks as T210B01 to simplify init.
2024-06-02 08:11:22 +03:00
CTCaer
26c6c6372d
bdk: display: rename window setup arrays
...
Add window number info and remove the fb naming
2024-06-02 08:05:50 +03:00
CTCaer
28eb3f4bcd
bdk: display: deduplicate array size macro
2024-06-02 08:02:44 +03:00
CTCaer
bd55a3e756
bdk: clock: always set DISPA source
...
No need to distinguish between LP or HS.
Setting the same value doesn't glitch.
2024-06-02 08:00:42 +03:00
CTCaer
146ff53a31
hekate: set bpmp high clock earlier
2024-06-02 07:57:22 +03:00
CTCaer
a96cac5964
hekate: adjust payload sd wait
...
hekate always waits at init, so not need to do that 2 times.
2024-06-02 07:56:07 +03:00