Preserve Checkpoint across update installs.

Skip deleting sd:/switch/checkpoint so user saves under saves/ are not wiped.

.gitignore

@@ -20,3 +20,6 @@ Thumbs.db
 # Version file is tracked, ignore local edits
 # VERSION
 
+# Vendored TegraExplorer tree
+source/TegraExplorer/
+

DEBUG_INI.md

@@ -0,0 +1,90 @@
+# Debug configuration (`debug.ini`)
+
+Optional file to **skip parts of the install** for testing (e.g. run only deletion and inspect the SD card). If the file is **missing**, the installer ignores debug entirely and runs the full flow.
+
+## Location
+
+```
+sd:/config/omninx/debug.ini
+```
+
+Create the folder `sd:/config/omninx/` on the SD card if it does not exist. Same parent directory as `manifest.ini` and `config.ini`.
+
+## Format
+
+- Section name must be exactly **`[Debug]`** (case-sensitive in the parser).
+- One key per line: `name=value`.
+- **Enabling a skip:** set the value so it **starts** with one of: `1`, `t`, `T`, `y`, `Y`  
+  Examples: `1`, `true`, `yes`, `True` — all enable that skip.
+- **Disabling:** `0`, `false`, `no`, or omit the key.
+
+## Parameters
+
+### Clean install mode (`INSTALL_MODE_CLEAN`)
+
+| Key | What is skipped |
+|-----|-----------------|
+| `skip_clean_backup` | Step 1 — backup of `sd:/switch/DBI/dbi.config`, `sd:/switch/prod.keys` to `sd:/temp_backup` |
+| `skip_clean_wipe` | Step 2 — all cleanup from `deletion_lists_clean.h` (deletion / wipe) |
+| `skip_clean_restore` | Step 3 — restore from `sd:/temp_backup` and post-restore paths (e.g. delete `sd:/switch/tinfoil/db`) |
+| `skip_clean_install` | Step 4 — copy files from the OmniNX staging folder to the SD root |
+| `skip_clean_staging_cleanup` | After install: do not remove the staging directory or other variant staging folders |
+
+### Update mode (`INSTALL_MODE_UPDATE`)
+
+| Key | What is skipped |
+|-----|-----------------|
+| `skip_update_cleanup` | Step 1 — selective deletion from `deletion_lists_update.h` |
+| `skip_update_install` | Step 2 — copy from staging to SD |
+| `skip_update_staging_cleanup` | End: do not remove staging / other variant folders |
+| `skip_update_horizon_oc` | **OC variant only:** HorizonOC config backup before update, restore and cleanup after (entire HorizonOC update side path) |
+
+### Both modes
+
+| Key | What is skipped |
+|-----|-----------------|
+| `skip_hekate_8gb_post_copy` | After a successful copy: the optional `hekate_8GB` / RAM menu and related file moves (see `install_hekate_8gb_post_copy` in `install.c`) |
+
+## Behaviour
+
+- On startup, if `debug.ini` exists and parses successfully, the payload prints a **DEBUG-MODUS** banner listing which skips are active.
+- If the file is absent, unreadable, or has no `[Debug]` section, **no** skips apply — behaviour matches a release install.
+- Skipping steps can leave the SD in an inconsistent state; this is **for developers/testers only**.
+
+## Examples
+
+### Wipe only (test deletion, no backup/restore/copy)
+
+Inspect leftovers after the clean-install wipe, without backing up, restoring, installing, or cleaning staging:
+
+```ini
+[Debug]
+skip_clean_backup=1
+skip_clean_restore=1
+skip_clean_install=1
+skip_clean_staging_cleanup=1
+skip_hekate_8gb_post_copy=1
+```
+
+Do **not** set `skip_clean_wipe` (leave unset or `0`).
+
+### Update: deletion only
+
+```ini
+[Debug]
+skip_update_install=1
+skip_update_staging_cleanup=1
+skip_hekate_8gb_post_copy=1
+```
+
+### OC update without touching HorizonOC backup/restore
+
+```ini
+[Debug]
+skip_update_horizon_oc=1
+```
+
+## Implementation
+
+- Parsed in `install.c`: `install_debug_load()`, `perform_installation()`.
+- Uses the same INI parser as `config.ini` (`ini_parse` from BDK).

INSTALLATION_PROCESS.md

@@ -2,6 +2,8 @@
 
 This document provides a detailed, step-by-step breakdown of everything that is checked and done during the OmniNX installation/update process.
 
+For **optional debug step skips** (`sd:/config/omninx/debug.ini`), see **[DEBUG_INI.md](DEBUG_INI.md)**.
+
 ## Overview
 
 The OmniNX Installer Payload operates in two modes:
@@ -88,7 +90,9 @@ The OmniNX Installer Payload operates in two modes:
 **Trigger**: `INSTALL_MODE_UPDATE` (OmniNX already installed)
 
 ### Step 1: Cleanup (Selective Deletion)
-**Location**: `install.c:321-380`
+**Location**: `install_update.c` (`update_mode_cleanup`), `install.c` (`delete_path_lists_grouped`)
+
+Before deletion, the payload reads optional **`sd:/config/omninx/preserve.ini`** (section `[Preserve]`). Paths enabled there are skipped, as are delete targets that would remove them (parent/child overlap). See **[PRESERVE_INI.md](PRESERVE_INI.md)**. Clean install does not use this file.
 
 #### 10. Clean Atmosphere Subdirectories
 **Location**: `install.c:325-327`, `deletion_lists.h:9-34`
@@ -305,17 +309,12 @@ channel_pack={variant}        # Same as current_pack
 #### 32. Create Backup Directory
 - Creates `sd:/temp_backup/` directory
 
-#### 33. Backup DBI
-- **Source**: `sd:/switch/DBI/`
-- **Destination**: `sd:/temp_backup/DBI/`
-- Only if source exists
+#### 33. Backup DBI settings
+- **Source**: `sd:/switch/DBI/dbi.config` (file only, not the whole `DBI` tree)
+- **Destination**: `sd:/temp_backup/dbi.config`
+- Only if the source file exists
 
-#### 34. Backup Tinfoil
-- **Source**: `sd:/switch/tinfoil/`
-- **Destination**: `sd:/temp_backup/tinfoil/`
-- Only if source exists
-
-#### 35. Backup prod.keys
+#### 34. Backup prod.keys
 - **Source**: `sd:/switch/prod.keys`
 - **Destination**: `sd:/temp_backup/prod.keys`
 - Only if source exists
@@ -325,22 +324,22 @@ channel_pack={variant}        # Same as current_pack
 ### Step 2: Wipe Directories
 **Location**: `install.c:543-602`
 
-#### 36. Delete Entire Directories
+#### 35. Delete Entire Directories
 Recursively deletes (if they exist):
 - `sd:/atmosphere/` (entire directory tree)
 - `sd:/bootloader/` (entire directory tree)
 - `sd:/config/` (entire directory tree)
 - `sd:/switch/` (entire directory tree)
 
-#### 37. Delete Root Files
+#### 36. Delete Root Files
 - Uses same deletion list as update mode (Step 19)
 - Deletes `boot.dat`, `boot.ini`, `exosphere.ini`, etc.
 
-#### 38. Delete Miscellaneous Items
+#### 37. Delete Miscellaneous Items
 - Uses same deletion lists as update mode (Steps 20-21)
 - Deletes `argon/`, `games/`, `SaltySD/`, etc.
 
-#### 39. Recreate Switch Directory
+#### 38. Recreate Switch Directory
 - Creates empty `sd:/switch/` directory for restoration
 
 ---
@@ -348,27 +347,17 @@ Recursively deletes (if they exist):
 ### Step 3: Restore User Data
 **Location**: `backup.c:55-95`
 
-#### 40. Restore DBI
-- **Source**: `sd:/temp_backup/DBI/`
-- **Destination**: `sd:/switch/DBI/`
-- **Cleanup**: After restoration, deletes old DBI NRO files:
-  - `sd:/switch/DBI/DBI_810_EN.nro`
-  - `sd:/switch/DBI/DBI_810_DE.nro`
-  - `sd:/switch/DBI/DBI_845_EN.nro`
-  - `sd:/switch/DBI/DBI_845_DE.nro`
-  - `sd:/switch/DBI/DBI.nro`
+#### 39. Restore DBI settings
+- **Source**: `sd:/temp_backup/dbi.config`
+- **Destination**: `sd:/switch/DBI/dbi.config` (creates `sd:/switch/DBI/` if needed)
+- No longer copies the full `DBI` folder; old `.nro` cleanup is unnecessary
 
-#### 41. Restore Tinfoil
-- **Source**: `sd:/temp_backup/tinfoil/`
-- **Destination**: `sd:/switch/tinfoil/`
-- **Cleanup**: After restoration, deletes `sd:/switch/tinfoil/tinfoil.nro`
-
-#### 42. Restore prod.keys
+#### 40. Restore prod.keys
 - **Source**: `sd:/temp_backup/prod.keys`
 - **Destination**: `sd:/switch/prod.keys`
 
-#### 43. Cleanup Backup Directory
-**Location**: `backup.c:98-103`
+#### 41. Cleanup Backup Directory
+**Location**: `backup.c` (`cleanup_backup`)
 - Deletes `sd:/temp_backup/` directory after restoration
 
 ---

Makefile

@@ -31,6 +31,9 @@ OBJS += $(patsubst $(BDKDIR)/%.S, $(BUILDDIR)/$(TARGET)/%.o, \
 		$(patsubst $(BDKDIR)/%.c, $(BUILDDIR)/$(TARGET)/%.o, \
 		$(call rwildcard, $(BDKDIR), *.S *.c)))
 
+# Optional vendored tree under source/TegraExplorer/ is not part of this payload build.
+OBJS := $(filter-out $(BUILDDIR)/$(TARGET)/TegraExplorer/%,$(OBJS))
+
 GFX_INC   := '"../$(SOURCEDIR)/gfx.h"'
 FFCFG_INC := '"../$(SOURCEDIR)/libs/fatfs/ffconf.h"'
 

PRESERVE_INI.md

@@ -0,0 +1,59 @@
+# User preserve list (`preserve.ini`)
+
+**Update mode only.** During OmniNX update cleanup (selective deletion), any path listed here with a truthy value is **not** deleted. Paths that would remove a preserved path (parent directory) are skipped as well.
+
+- **File:** `sd:/config/omninx/preserve.ini`
+- If missing or invalid, behavior is unchanged (full update deletion list applies).
+
+## Format
+
+Section **`[Preserve]`** (case-sensitive). Each line is **path as key**, **enable flag as value**:
+
+```ini
+[Preserve]
+'sd:/ROMs'=1
+sd:/switch/MyHomebrewFolder=0
+sd:/backup/tools=1
+```
+
+### Path (key)
+
+- Must start with **`sd:/`** (after optional quoting).
+- **Optional** matching **single** or **double** quotes around the key are stripped (helps Ultrahand `set-ini-val` and readability).
+- Trailing slashes are normalized away (except the volume root).
+- **`sd:/` alone** is rejected (too broad).
+- Minimum useful length after `sd:/` is enforced (at least one more character).
+
+### Value (enable)
+
+**On** if the value starts with `1`, `t`, `T`, `y`, or `Y` (e.g. `1`, `true`, `yes`). Anything else is **off** (path ignored).
+
+### Limits
+
+- Up to **96** preserved paths; longer keys truncated internally (~224 bytes per path).
+- Duplicate paths after normalization are skipped.
+- The list is allocated on the **heap** only while update cleanup runs (not a large static buffer in IPL IRAM), to avoid crowding hardware-adjacent memory used by Joy-Con UART and similar peripherals.
+
+## Overlap rules
+
+For each delete candidate from `deletion_lists_update.h`, deletion is skipped if it **overlaps** any enabled preserve path:
+
+- Same path, or
+- Delete target is **inside** a preserved tree (preserved path is a prefix), or
+- Delete target is an **ancestor** of a preserved path (deleting it would remove the preserved data).
+
+So preserving `sd:/ROMs` also blocks deleting `sd:/ROMs/title` if that were on the delete list, and blocks deleting `sd:/` if `sd:/ROMs` is preserved.
+
+## Ultrahand
+
+You can toggle entries with:
+
+```text
+set-ini-val sd:/config/omninx/preserve.ini Preserve 'sd:/ROMs' 1
+```
+
+and `0` to disable. Use the same quoted path in the key argument as in your INI.
+
+## Clean install
+
+**Not used** in clean install mode. `preserve.ini` is only read for **update** cleanup (`update_mode_cleanup`).

README.md

@@ -1,163 +1,165 @@
-# OmniNX Installer Payload
-
-> **To properly use this payload, download the latest OmniNX Release:** [https://git.niklascfw.de/OmniNX/OmniNX/releases](https://git.niklascfw.de/OmniNX/OmniNX/releases)
-
-A minimal payload for installing OmniNX CFW Pack files on Nintendo Switch outside of Horizon OS.
-
-Based on [TegraExplorer](https://github.com/shchmue/TegraExplorer) and [hekate](https://github.com/CTCaer/hekate) by CTCaer, naehrwert, and shchmue.  
-Based on [HATS-Installer-Payload](https://github.com/sthetix/HATS-Installer-Payload) by sthetix.
-
-## Features
-
-- **Automatic Variant Detection**: Detects which OmniNX pack variant is present (Standard/Light/OC)
-- **Smart Installation Modes**: 
-  - **Update Mode**: Selective deletion when OmniNX is already installed
-  - **Clean Install**: Full wipe with backup/restore of user data (DBI, Tinfoil, prod.keys)
-- **Version Detection**: Detects installed OmniNX version via marker files (`1.0.0s`, `1.0.0l`, `1.0.0oc`)
-- **Progress Display**: Visual status messages during installation
-- **Error Handling**: Detailed error reporting on screen
-- **Payload Chaining**: Automatically launch hekate after installation
-
-## Documentation
-
-For detailed information about the installation process, see:
-- **[INSTALLATION_PROCESS.md](INSTALLATION_PROCESS.md)** - Complete step-by-step breakdown of everything checked and done during installation/update
-
-## Installation Modes
-
-### Update Mode (OmniNX Detected)
-- Detected when version marker files (`1.0.0s`, `1.0.0l`, or `1.0.0oc`) are found
-- Performs selective deletion of specific directories/files
-- Preserves user data, savegames, and installed games
-- Updates only necessary CFW components
-
-### Clean Install (No OmniNX Detected)
-- Detected when no version marker files are found
-- Performs full wipe of `/atmosphere`, `/bootloader`, `/config`, and `/switch`
-- **Backs up and restores**:
-  - `sd:/switch/DBI` → preserved
-  - `sd:/switch/tinfoil` → preserved
-  - `sd:/switch/prod.keys` → preserved
-- Fresh installation of all CFW components
-
-## Building
-
-### Prerequisites
-
-- **devkitARM** - ARM toolchain for Nintendo Switch development
-- **BDK** - Blue Development Kit (included in this repo)
-
-### Build Commands
-
-```bash
-make clean
-make
-```
-
-The built payload will be output to `output/OmniNX-Installer.bin`.
-
-### CI / GitHub Actions
-
-Every push triggers a build. The `.bin` file is produced and attached as a workflow artifact (Actions tab → select run → Artifacts).
-
-## Usage
-
-### 1. Extract OmniNX Pack to SD Card
-
-Extract the OmniNX pack zip file directly to your SD card. The pack should contain one of:
-
-```
-sd:/OmniNX Standard/
-├── atmosphere/
-├── bootloader/
-├── config/
-├── switch/
-├── TegraExplorer/
-├── warmboot_mariko/
-├── boot.dat
-├── boot.ini
-├── exosphere.ini
-├── hbmenu.nro
-├── loader.bin
-├── payload.bin
-└── 1.0.0s
-```
-
-Or `sd:/OmniNX Light/` or `sd:/OmniNX OC/` for other variants.
-
-**Important**: Extract both the OmniNX pack zip AND this payload to your SD card.
-
-### 2. Launch Payload
-
-Use hekate or another bootloader to launch the payload:
-
-1. Place `omninx-installer.bin` in `sd:/bootloader/payloads/`
-2. Launch the payload from hekate's payload menu
-3. The payload will automatically:
-   - Detect which pack variant is present
-   - Detect if OmniNX is already installed
-   - Perform appropriate installation (update or clean)
-   - Launch hekate after completion
-
-### 3. What Happens
-
-1. Payload mounts the SD card
-2. Detects current OmniNX installation (if any)
-3. Detects which pack variant is on SD card
-4. Determines installation mode (update vs clean)
-5. Performs cleanup based on mode:
-   - **Update**: Selective deletion of specific paths
-   - **Clean**: Full wipe with backup/restore
-6. Copies files from pack directory to SD root
-7. Creates version marker file
-8. Cleans up old version markers
-9. Launches hekate (`sd:/bootloader/update.bin`)
-
-## Variant Support
-
-The payload supports three OmniNX variants:
-
-- **Standard** – `sd:/OmniNX Standard/`
-- **Light** – `sd:/OmniNX Light/`
-- **OC** – `sd:/OmniNX OC/`
-
-The payload detects the pack variant from the staging directory presence and detects the current installation (variant + version) from `sd:/config/omninx/manifest.ini` (`current_pack` and `version` keys).
-
-## Project Structure
-
-```
-OmniNX-Installer-Payload/
-├── source/              # Main source code
-│   ├── main.c          # Entry point and main flow
-│   ├── version.c       # Version/variant detection
-│   ├── version.h
-│   ├── install.c       # Installation logic
-│   ├── install.h
-│   ├── backup.c        # Backup/restore operations
-│   ├── backup.h
-│   ├── deletion_lists.h # Arrays of paths to delete
-│   ├── fs.c            # File system operations
-│   ├── fs.h
-│   ├── gfx.c           # Graphics utilities
-│   ├── gfx.h
-│   ├── nx_sd.c         # SD card operations
-│   ├── nx_sd.h
-│   ├── link.ld         # Linker script
-│   └── start.S         # Startup assembly
-├── bdk/                # Blue Development Kit
-├── Makefile            # Build configuration
-├── VERSION             # Version file
-└── README.md           # This file
-```
-
-## License
-
-This project is based on TegraExplorer and hekate. Please refer to those projects for their respective licenses.
-
-## Credits
-
-- **CTCaer** - [hekate](https://github.com/CTCaer/hekate)
-- **naehrwert** - Tegra exploration work
-- **shchmue** - [TegraExplorer](https://github.com/shchmue/TegraExplorer)
-- **sthetix** - [HATS-Installer-Payload](https://github.com/sthetix/HATS-Installer-Payload) (inspiration and base structure)
-- **Woody2408** - OmniNX CFW Pack creator
+# OmniNX Installer Payload
+
+> **To properly use this payload, download the latest OmniNX Release:** [https://git.niklascfw.de/OmniNX/OmniNX/releases](https://git.niklascfw.de/OmniNX/OmniNX/releases)
+
+A minimal payload for installing OmniNX CFW Pack files on Nintendo Switch outside of Horizon OS.
+
+Based on [TegraExplorer](https://github.com/shchmue/TegraExplorer) and [hekate](https://github.com/CTCaer/hekate) by CTCaer, naehrwert, and shchmue.  
+Based on [HATS-Installer-Payload](https://github.com/sthetix/HATS-Installer-Payload) by sthetix.
+
+## Features
+
+- **Automatic Variant Detection**: Detects which OmniNX pack variant is present (Standard/Light/OC)
+- **Smart Installation Modes**: 
+  - **Update Mode**: Selective deletion when OmniNX is already installed
+  - **Clean Install**: Full wipe with backup/restore of user data (DBI `dbi.config`, prod.keys)
+- **Version Detection**: Detects installed OmniNX version via marker files (`1.0.0s`, `1.0.0l`, `1.0.0oc`)
+- **Progress Display**: Visual status messages during installation
+- **Error Handling**: Detailed error reporting on screen
+- **Payload Chaining**: Automatically launch hekate after installation
+
+## Documentation
+
+For detailed information about the installation process, see:
+- **[INSTALLATION_PROCESS.md](INSTALLATION_PROCESS.md)** - Complete step-by-step breakdown of everything checked and done during installation/update
+- **[DEBUG_INI.md](DEBUG_INI.md)** - Optional `sd:/config/omninx/debug.ini` parameters to skip install steps (for testing)
+- **[PRESERVE_INI.md](PRESERVE_INI.md)** - Optional `sd:/config/omninx/preserve.ini` to skip deleting chosen paths in **update** mode
+
+## Installation Modes
+
+### Update Mode (OmniNX Detected)
+- Detected when version marker files (`1.0.0s`, `1.0.0l`, or `1.0.0oc`) are found
+- Performs selective deletion of specific directories/files
+- Optional **`sd:/config/omninx/preserve.ini`**: user-listed `sd:/…` paths (with `=1`) are excluded from that cleanup (see [PRESERVE_INI.md](PRESERVE_INI.md))
+- Preserves user data, savegames, and installed games
+- Updates only necessary CFW components
+
+### Clean Install (No OmniNX Detected)
+- Detected when no version marker files are found
+- Performs full wipe of `/atmosphere`, `/bootloader`, `/config`, and `/switch`
+- **Backs up and restores**:
+  - `sd:/switch/DBI/dbi.config` → preserved (not the whole `DBI` folder)
+  - `sd:/switch/prod.keys` → preserved
+- Fresh installation of all CFW components
+
+## Building
+
+### Prerequisites
+
+- **devkitARM** - ARM toolchain for Nintendo Switch development
+- **BDK** - Blue Development Kit (included in this repo)
+
+### Build Commands
+
+```bash
+make clean
+make
+```
+
+The built payload will be output to `output/OmniNX-Installer.bin`.
+
+### CI / GitHub Actions
+
+Every push triggers a build. The `.bin` file is produced and attached as a workflow artifact (Actions tab → select run → Artifacts).
+
+## Usage
+
+### 1. Extract OmniNX Pack to SD Card
+
+Extract the OmniNX pack zip file directly to your SD card. The pack should contain one of:
+
+```
+sd:/OmniNX Standard/
+├── atmosphere/
+├── bootloader/
+├── config/
+├── switch/
+├── TegraExplorer/
+├── warmboot_mariko/
+├── boot.dat
+├── boot.ini
+├── exosphere.ini
+├── hbmenu.nro
+├── loader.bin
+├── payload.bin
+└── 1.0.0s
+```
+
+Or `sd:/OmniNX Light/` or `sd:/OmniNX OC/` for other variants.
+
+**Important**: Extract both the OmniNX pack zip AND this payload to your SD card.
+
+### 2. Launch Payload
+
+Use hekate or another bootloader to launch the payload:
+
+1. Place `omninx-installer.bin` in `sd:/bootloader/payloads/`
+2. Launch the payload from hekate's payload menu
+3. The payload will automatically:
+   - Detect which pack variant is present
+   - Detect if OmniNX is already installed
+   - Perform appropriate installation (update or clean)
+   - Launch hekate after completion
+
+### 3. What Happens
+
+1. Payload mounts the SD card
+2. Detects current OmniNX installation (if any)
+3. Detects which pack variant is on SD card
+4. Determines installation mode (update vs clean)
+5. Performs cleanup based on mode:
+   - **Update**: Selective deletion of specific paths
+   - **Clean**: Full wipe with backup/restore
+6. Copies files from pack directory to SD root
+7. Creates version marker file
+8. Cleans up old version markers
+9. Launches hekate (`sd:/bootloader/update.bin`)
+
+## Variant Support
+
+The payload supports three OmniNX variants:
+
+- **Standard** – `sd:/OmniNX Standard/`
+- **Light** – `sd:/OmniNX Light/`
+- **OC** – `sd:/OmniNX OC/`
+
+The payload detects the pack variant from the staging directory presence and detects the current installation (variant + version) from `sd:/config/omninx/manifest.ini` (`current_pack` and `version` keys).
+
+## Project Structure
+
+```
+OmniNX-Installer-Payload/
+├── source/              # Main source code
+│   ├── main.c          # Entry point and main flow
+│   ├── version.c       # Version/variant detection
+│   ├── version.h
+│   ├── install.c       # Installation logic
+│   ├── install.h
+│   ├── backup.c        # Backup/restore operations
+│   ├── backup.h
+│   ├── deletion_lists.h # Arrays of paths to delete
+│   ├── fs.c            # File system operations
+│   ├── fs.h
+│   ├── gfx.c           # Graphics utilities
+│   ├── gfx.h
+│   ├── nx_sd.c         # SD card operations
+│   ├── nx_sd.h
+│   ├── link.ld         # Linker script
+│   └── start.S         # Startup assembly
+├── bdk/                # Blue Development Kit
+├── Makefile            # Build configuration
+├── VERSION             # Version file
+└── README.md           # This file
+```
+
+## License
+
+This project is based on TegraExplorer and hekate. Please refer to those projects for their respective licenses.
+
+## Credits
+
+- **CTCaer** - [hekate](https://github.com/CTCaer/hekate)
+- **naehrwert** - Tegra exploration work
+- **shchmue** - [TegraExplorer](https://github.com/shchmue/TegraExplorer)
+- **sthetix** - [HATS-Installer-Payload](https://github.com/sthetix/HATS-Installer-Payload) (inspiration and base structure)
+- **Woody2408** - OmniNX CFW Pack creator

VERSION

@@ -1 +1 @@
-1.0.0
+1.0.1

bdk/input/joycon.c

@@ -721,6 +721,12 @@ void jc_deinit()
 	clock_disable_uart(UART_C);
 }
 
+/* Drop current button state without power-cycling the Joy-Cons. */
+void jc_clear_input(void)
+{
+	jc_gamepad.buttons = 0;
+}
+
 static void jc_init_conn(joycon_ctxt_t *jc)
 {
 	if (((u32)get_tmr_ms() - jc->last_received_time) > 1000)

bdk/input/joycon.h

@@ -92,6 +92,7 @@ typedef struct _jc_gamepad_rpt_t
 void jc_power_supply(u8 uart, bool enable);
 void jc_init_hw();
 void jc_deinit();
+void jc_clear_input(void);
 jc_gamepad_rpt_t *joycon_poll();
 jc_gamepad_rpt_t *jc_get_bt_pairing_info(bool *is_l_hos, bool *is_r_hos);
 

source/backup.c

@@ -24,17 +24,9 @@ int backup_user_data(void) {
         return res;
     }
     
-    // Backup DBI if it exists
-    if (path_exists("sd:/switch/DBI")) {
-        res = folder_copy("sd:/switch/DBI", TEMP_BACKUP_PATH);
-        if (res != FR_OK) {
-            return res;
-        }
-    }
-    
-    // Backup Tinfoil if it exists
-    if (path_exists("sd:/switch/tinfoil")) {
-        res = folder_copy("sd:/switch/tinfoil", TEMP_BACKUP_PATH);
+    // Backup DBI settings file only (not .nro installers)
+    if (path_exists(DBI_CONFIG_PATH)) {
+        res = file_copy(DBI_CONFIG_PATH, TEMP_BACKUP_DBI_CONFIG);
         if (res != FR_OK) {
             return res;
         }
@@ -47,6 +39,35 @@ int backup_user_data(void) {
             return res;
         }
     }
+
+    // Backup CyberFoil (nro, config, remotes) if installed
+    if (path_exists(CYBERFOIL_DIR)) {
+        res = f_mkdir(TEMP_BACKUP_CYBERFOIL);
+        if (res != FR_OK && res != FR_EXIST) {
+            return res;
+        }
+
+        if (path_exists(CYBERFOIL_NRO)) {
+            res = file_copy(CYBERFOIL_NRO, TEMP_BACKUP_CYBERFOIL_NRO);
+            if (res != FR_OK) {
+                return res;
+            }
+        }
+
+        if (path_exists(CYBERFOIL_CONFIG)) {
+            res = file_copy(CYBERFOIL_CONFIG, TEMP_BACKUP_CYBERFOIL_CONFIG);
+            if (res != FR_OK) {
+                return res;
+            }
+        }
+
+        if (path_exists(CYBERFOIL_REMOTES)) {
+            res = folder_copy(CYBERFOIL_REMOTES, TEMP_BACKUP_CYBERFOIL);
+            if (res != FR_OK) {
+                return res;
+            }
+        }
+    }
     
     return FR_OK;
 }
@@ -61,25 +82,15 @@ int restore_user_data(void) {
         return res;
     }
     
-    // Restore DBI if backup exists
-    if (path_exists("sd:/temp_backup/DBI")) {
-        res = folder_copy("sd:/temp_backup/DBI", "sd:/switch");
-        if (res == FR_OK) {
-            // Delete old DBI .nro files
-            f_unlink("sd:/switch/DBI/DBI_810_EN.nro");
-            f_unlink("sd:/switch/DBI/DBI_810_DE.nro");
-            f_unlink("sd:/switch/DBI/DBI_845_EN.nro");
-            f_unlink("sd:/switch/DBI/DBI_845_DE.nro");
-            f_unlink("sd:/switch/DBI/DBI.nro");
+    // Restore DBI settings if backed up
+    if (path_exists(TEMP_BACKUP_DBI_CONFIG)) {
+        res = f_mkdir("sd:/switch/DBI");
+        if (res != FR_OK && res != FR_EXIST) {
+            return res;
         }
-    }
-    
-    // Restore Tinfoil if backup exists
-    if (path_exists("sd:/temp_backup/tinfoil")) {
-        res = folder_copy("sd:/temp_backup/tinfoil", "sd:/switch");
-        if (res == FR_OK) {
-            // Delete old tinfoil.nro
-            f_unlink("sd:/switch/tinfoil/tinfoil.nro");
+        res = file_copy(TEMP_BACKUP_DBI_CONFIG, DBI_CONFIG_PATH);
+        if (res != FR_OK) {
+            return res;
         }
     }
     
@@ -90,6 +101,35 @@ int restore_user_data(void) {
             return res;
         }
     }
+
+    // Restore CyberFoil if backed up
+    if (path_exists(TEMP_BACKUP_CYBERFOIL)) {
+        res = f_mkdir(CYBERFOIL_DIR);
+        if (res != FR_OK && res != FR_EXIST) {
+            return res;
+        }
+
+        if (path_exists(TEMP_BACKUP_CYBERFOIL_NRO)) {
+            res = file_copy(TEMP_BACKUP_CYBERFOIL_NRO, CYBERFOIL_NRO);
+            if (res != FR_OK) {
+                return res;
+            }
+        }
+
+        if (path_exists(TEMP_BACKUP_CYBERFOIL_CONFIG)) {
+            res = file_copy(TEMP_BACKUP_CYBERFOIL_CONFIG, CYBERFOIL_CONFIG);
+            if (res != FR_OK) {
+                return res;
+            }
+        }
+
+        if (path_exists(TEMP_BACKUP_CYBERFOIL_REMOTES)) {
+            res = folder_copy(TEMP_BACKUP_CYBERFOIL_REMOTES, CYBERFOIL_DIR);
+            if (res != FR_OK) {
+                return res;
+            }
+        }
+    }
     
     return FR_OK;
 }
@@ -101,3 +141,34 @@ int cleanup_backup(void) {
     }
     return FR_OK;
 }
+
+int backup_horizon_oc_config_for_oc_update(void) {
+    if (!path_exists(HORIZON_OC_CONFIG_PATH))
+        return FR_OK;
+
+    int res = f_mkdir(HORIZON_OC_UPDATE_BACKUP_DIR);
+    if (res != FR_OK && res != FR_EXIST)
+        return res;
+
+    return file_copy(HORIZON_OC_CONFIG_PATH, HORIZON_OC_UPDATE_BACKUP_INI);
+}
+
+int restore_horizon_oc_config_after_oc_update(void) {
+    if (!path_exists(HORIZON_OC_UPDATE_BACKUP_INI))
+        return FR_OK;
+
+    int res = f_mkdir("sd:/config");
+    if (res != FR_OK && res != FR_EXIST)
+        return res;
+    res = f_mkdir("sd:/config/horizon-oc");
+    if (res != FR_OK && res != FR_EXIST)
+        return res;
+
+    return file_copy(HORIZON_OC_UPDATE_BACKUP_INI, HORIZON_OC_CONFIG_PATH);
+}
+
+int cleanup_horizon_oc_update_backup(void) {
+    if (!path_exists(HORIZON_OC_UPDATE_BACKUP_DIR))
+        return FR_OK;
+    return folder_delete(HORIZON_OC_UPDATE_BACKUP_DIR);
+}

source/backup.h

@@ -7,8 +7,27 @@
 #include <utils/types.h>
 
 #define TEMP_BACKUP_PATH "sd:/temp_backup"
+/** DBI settings; preserved across clean install (not whole DBI folder). */
+#define DBI_CONFIG_PATH "sd:/switch/DBI/dbi.config"
+#define TEMP_BACKUP_DBI_CONFIG TEMP_BACKUP_PATH "/dbi.config"
 
-// Backup user data (DBI, Tinfoil, prod.keys) before clean install
+/** CyberFoil homebrew; preserved across clean install (nro, config, remotes only). */
+#define CYBERFOIL_DIR "sd:/switch/CyberFoil"
+#define CYBERFOIL_NRO CYBERFOIL_DIR "/cyberfoil.nro"
+#define CYBERFOIL_CONFIG CYBERFOIL_DIR "/config.json"
+#define CYBERFOIL_REMOTES CYBERFOIL_DIR "/remotes"
+#define TEMP_BACKUP_CYBERFOIL TEMP_BACKUP_PATH "/CyberFoil"
+#define TEMP_BACKUP_CYBERFOIL_NRO TEMP_BACKUP_CYBERFOIL "/cyberfoil.nro"
+#define TEMP_BACKUP_CYBERFOIL_CONFIG TEMP_BACKUP_CYBERFOIL "/config.json"
+#define TEMP_BACKUP_CYBERFOIL_REMOTES TEMP_BACKUP_CYBERFOIL "/remotes"
+
+/** Live HorizonOC settings (Overclock tool). */
+#define HORIZON_OC_CONFIG_PATH "sd:/config/horizon-oc/config.ini"
+/** Scratch dir during OC-variant update only; removed after successful restore. */
+#define HORIZON_OC_UPDATE_BACKUP_DIR "sd:/.omninx_oc_update"
+#define HORIZON_OC_UPDATE_BACKUP_INI HORIZON_OC_UPDATE_BACKUP_DIR "/config.ini"
+
+// Backup user data (CyberFoil, DBI dbi.config, prod.keys) before clean install
 int backup_user_data(void);
 
 // Restore user data after clean install
@@ -16,3 +35,10 @@ int restore_user_data(void);
 
 // Clean up temporary backup directory
 int cleanup_backup(void);
+
+// HorizonOC: backup config.ini before OC pack update (update mode only); no-op if missing
+int backup_horizon_oc_config_for_oc_update(void);
+// Restore after file copy; no-op if no backup from this run
+int restore_horizon_oc_config_after_oc_update(void);
+// Delete sd:/.omninx_oc_update after successful restore
+int cleanup_horizon_oc_update_backup(void);

source/deletion_lists_clean.h

@@ -1,86 +1,23 @@
 /*
  * OmniNX Installer - Deletion Lists for Clean Install Mode
- * Selective deletion when no OmniNX install was found.
- * Only listed paths are removed; does not wipe whole card or user configs.
+ * Deletion policy aligned with NiklasCFW pack clean install (TegraExplorer script):
+ * full sd:/atmosphere, bootloader/config subsets, sd:/switch, root + misc, then
+ * post-restore paths (e.g. tinfoil db). CyberFoil/DBI/prod.keys backup is in backup.c.
  */
 
 #pragma once
 
-// Atmosphere subdirectories to delete
+// Entire atmosphere/ tree (NiklasCFW: deldir("sd:/atmosphere"))
 static const char* clean_atmosphere_dirs_to_delete[] = {
-    "sd:/atmosphere/config",
-    "sd:/atmosphere/crash_reports",
-    "sd:/atmosphere/erpt_reports",
-    "sd:/atmosphere/exefs_patches/CrunchPatch",
-    "sd:/atmosphere/exefs_patches/Crunchyroll Patch 1.10.0",
-    "sd:/atmosphere/exefs_patches/bluetooth_patches",
-    "sd:/atmosphere/exefs_patches/bootlogo",
-    "sd:/atmosphere/exefs_patches/btm_patches",
-    "sd:/atmosphere/exefs_patches/es_patches",
-    "sd:/atmosphere/exefs_patches/hid_patches",
-    "sd:/atmosphere/exefs_patches/logo1",
-    "sd:/atmosphere/exefs_patches/nfim_ctest",
-    "sd:/atmosphere/exefs_patches/nim_ctest",
-    "sd:/atmosphere/exefs_patches/nvnflinger_cmu",
-    "sd:/atmosphere/extrazz",
-    "sd:/atmosphere/fatal_errors",
-    "sd:/atmosphere/fatal_reports",
-    "sd:/atmosphere/flags",
-    "sd:/atmosphere/hbl_html",
-    "sd:/atmosphere/hosts",
-    "sd:/atmosphere/kips",
-    "sd:/atmosphere/kip1",
-    "sd:/atmosphere/kip_patches",
-    "sd:/atmosphere/logs",
+    "sd:/atmosphere",
     NULL
 };
 
-// Atmosphere contents directories (title IDs; only under atmosphere/contents/)
 static const char* clean_atmosphere_contents_dirs_to_delete[] = {
-    "sd:/atmosphere/contents/0000000000534C56",
-    "sd:/atmosphere/contents/00FF0000B378D640",
-    "sd:/atmosphere/contents/00FF0000636C6BFF",
-    "sd:/atmosphere/contents/00FF0000A53BB665",
-    "sd:/atmosphere/contents/0100000000000008",
-    "sd:/atmosphere/contents/010000000000000D",
-    "sd:/atmosphere/contents/010000000000002B",
-    "sd:/atmosphere/contents/0100000000000032",
-    "sd:/atmosphere/contents/0100000000000034",
-    "sd:/atmosphere/contents/0100000000000036",
-    "sd:/atmosphere/contents/0100000000000037",
-    "sd:/atmosphere/contents/010000000000003C",
-    "sd:/atmosphere/contents/0100000000000042",
-    "sd:/atmosphere/contents/0100000000000895",
-    "sd:/atmosphere/contents/0100000000000F12",
-    "sd:/atmosphere/contents/0100000000001000",
-    "sd:/atmosphere/contents/0100000000001007",
-    "sd:/atmosphere/contents/0100000000001013",
-    "sd:/atmosphere/contents/010000000000DA7A",
-    "sd:/atmosphere/contents/010000000000bd00",
-    "sd:/atmosphere/contents/01006a800016e000",
-    "sd:/atmosphere/contents/01009D901BC56000",
-    "sd:/atmosphere/contents/0100A3900C3E2000",
-    "sd:/atmosphere/contents/0100F43008C44000",
-    "sd:/atmosphere/contents/050000BADDAD0000",
-    "sd:/atmosphere/contents/4200000000000000",
-    "sd:/atmosphere/contents/420000000000000B",
-    "sd:/atmosphere/contents/420000000000000E",
-    "sd:/atmosphere/contents/4200000000000010",
-    "sd:/atmosphere/contents/4200000000000FFF",
-    "sd:/atmosphere/contents/420000000007E51A",
-    "sd:/atmosphere/contents/420000000007E51B",
-    "sd:/atmosphere/contents/690000000000000D",
     NULL
 };
 
-// Atmosphere files to delete
 static const char* clean_atmosphere_files_to_delete[] = {
-    "sd:/atmosphere/config/exosphere.ini",
-    "sd:/atmosphere/config/stratosphere.ini",
-    "sd:/atmosphere/hbl.nsp",
-    "sd:/atmosphere/package3",
-    "sd:/atmosphere/reboot_payload.bin",
-    "sd:/atmosphere/stratosphere.romfs",
     NULL
 };
 
@@ -101,7 +38,6 @@ static const char* clean_bootloader_files_to_delete[] = {
     "sd:/bootloader/ArgonNX.bin",
     "sd:/bootloader/bootlogo.bmp",
     "sd:/bootloader/hekate_ipl.ini",
-    "sd:/bootloader/nyx.ini",
     "sd:/bootloader/patches.ini",
     "sd:/bootloader/update.bin",
     "sd:/bootloader/ini/EmuMMC ohne Mods.ini",
@@ -114,7 +50,6 @@ static const char* clean_config_dirs_to_delete[] = {
     "sd:/config/blue_pack_updater",
     "sd:/config/kefir-updater",
     "sd:/config/nx-hbmenu",
-    "sd:/config/quickntp",
     "sd:/config/sys-con",
     "sd:/config/sys-patch",
     "sd:/config/uberhand",
@@ -122,120 +57,13 @@ static const char* clean_config_dirs_to_delete[] = {
     NULL
 };
 
-// Switch directories to delete
+// Entire switch/ tree (clean install recreates sd:/switch after wipe)
 static const char* clean_switch_dirs_to_delete[] = {
-    "sd:/switch/.overlays",
-    "sd:/switch/.packages",
-    "sd:/switch/90DNS_tester",
-    "sd:/switch/aio-switch-updater",
-    "sd:/switch/amsPLUS-downloader",
-    "sd:/switch/appstore",
-    "sd:/switch/AtmoXL-Titel-Installer",
-    "sd:/switch/breeze",
-    "sd:/switch/checkpoint",
-    "sd:/switch/cheats-updater",
-    "sd:/switch/chiaki",
-    "sd:/switch/ChoiDujourNX",
-    "sd:/switch/crash_ams",
-    "sd:/switch/Daybreak",
-    "sd:/switch/DNS_mitm Tester",
-    "sd:/switch/EdiZon",
-    "sd:/switch/Fizeau",
-    "sd:/switch/FTPD",
-    "sd:/switch/fw-downloader",
-    "sd:/switch/gamecard_installer",
-    "sd:/switch/Goldleaf",
-    "sd:/switch/haze",
-    "sd:/switch/JKSV",
-    "sd:/switch/kefir-updater",
-    "sd:/switch/ldnmitm_config",
-    "sd:/switch/Linkalho",
-    "sd:/switch/Moonlight-Switch",
-    "sd:/switch/Neumann",
-    "sd:/switch/NX-Activity-Log",
-    "sd:/switch/NX-Save-Sync",
-    "sd:/switch/NX-Shell",
-    "sd:/switch/NX-Update-Checker ",
-    "sd:/switch/NXGallery",
-    "sd:/switch/NXRemoteLauncher",
-    "sd:/switch/NXThemesInstaller",
-    "sd:/switch/nxdumptool",
-    "sd:/switch/nxmtp",
-    "sd:/switch/Payload_launcher",
-    "sd:/switch/Reboot",
-    "sd:/switch/reboot_to_argonNX",
-    "sd:/switch/reboot_to_hekate",
-    "sd:/switch/Shutdown_System",
-    "sd:/switch/SimpleModDownloader",
-    "sd:/switch/SimpleModManager",
-    "sd:/switch/sphaira",
-    "sd:/switch/studious-pancake",
-    "sd:/switch/Switch-Time",
-    "sd:/switch/SwitchIdent",
-    "sd:/switch/Switch_themes_Installer",
-    "sd:/switch/Switchfin",
-    "sd:/switch/Sys-Clk Manager",
-    "sd:/switch/Sys-Con",
-    "sd:/switch/sys-clk-manager",
-    "sd:/switch/themezer-nx",
-    "sd:/switch/themezernx",
-    "sd:/switch/tinwoo",
+    "sd:/switch",
     NULL
 };
 
-// Switch files (NRO) to delete
 static const char* clean_switch_files_to_delete[] = {
-    "sd:/switch/90DNS_tester/90DNS_tester.nro",
-    "sd:/switch/breeze.nro",
-    "sd:/switch/cheats-updater.nro",
-    "sd:/switch/chiaki.nro",
-    "sd:/switch/ChoiDujourNX.nro",
-    "sd:/switch/daybreak.nro",
-    "sd:/switch/DBI.nro",
-    "sd:/switch/DBI/DBI.nro",
-    "sd:/switch/DBI/DBI_810_DE.nro",
-    "sd:/switch/DBI/DBI_810_EN.nro",
-    "sd:/switch/DBI/DBI_845_DE.nro",
-    "sd:/switch/DBI/DBI_845_EN.nro",
-    "sd:/switch/DBI/DBI_849_DE.nro",
-    "sd:/switch/DBI/DBI_849_EN.nro",
-    "sd:/switch/DBI/DBI_874_DE.nro",
-    "sd:/switch/DBI/DBI_874_EN.nro",
-    "sd:/switch/DBI_810_DE/DBI_810.nro",
-    "sd:/switch/DBI_810_DE/DBI_810_DE.nro",
-    "sd:/switch/DBI_810_EN/DBI_810_EN.nro",
-    "sd:/switch/DBI_RU/DBI_RU.nro",
-    "sd:/switch/DBI/DBI_EN.nro",
-    "sd:/switch/DBI_DE/DBI_DE.nro",
-    "sd:/switch/DNS_mitm Tester.nro",
-    "sd:/switch/EdiZon.nro",
-    "sd:/switch/Fizeau.nro",
-    "sd:/switch/Goldleaf.nro",
-    "sd:/switch/haze.nro",
-    "sd:/switch/JKSV.nro",
-    "sd:/switch/ldnmitm_config.nro",
-    "sd:/switch/linkalho.nro",
-    "sd:/switch/Moonlight-Switch.nro",
-    "sd:/switch/Neumann.nro",
-    "sd:/switch/NX-Shell.nro",
-    "sd:/switch/NXGallery.nro",
-    "sd:/switch/NXThemesInstaller.nro",
-    "sd:/switch/nxdumptool.nro",
-    "sd:/switch/nxtc.bin",
-    "sd:/switch/reboot_to_payload.nro",
-    "sd:/switch/SimpleModDownloader.nro",
-    "sd:/switch/SimpleModManager.nro",
-    "sd:/switch/sphaira.nro",
-    "sd:/switch/SwitchIdent.nro",
-    "sd:/switch/Switch_themes_Installer/NXThemesInstaller.nro",
-    "sd:/switch/Switchfin.nro",
-    "sd:/switch/Sys-Clk Manager/sys-clk-manager.nro",
-    "sd:/switch/Sys-Con.nro",
-    "sd:/switch/sys-clk-manager.nro",
-    "sd:/switch/tinfoil.nro",
-    "sd:/switch/tinfoil/tinfoil.nro",
-    "sd:/switch/tinwoo.nro",
-    "sd:/switch/tinwoo/tinwoo.nro",
     NULL
 };
 
@@ -263,8 +91,10 @@ static const char* clean_misc_dirs_to_delete[] = {
     "sd:/NSPs (Tools)",
     "sd:/Patched Apps",
     "sd:/SaltySD/flags",
+    "sd:/SaltySD/patches",
     "sd:/scripts",
-    "sd:/switch/tinfoil/db",
+    "sd:/TegraExplorer",
+    "sd:/themes/systemData",
     "sd:/tools",
     "sd:/warmboot_mariko",
     NULL
@@ -283,16 +113,21 @@ static const char* clean_misc_files_to_delete[] = {
     NULL
 };
 
+// After DBI/prod.keys restore (NiklasCFW: deldir("sd:/switch/tinfoil/db"))
+static const char* clean_post_restore_dirs_to_delete[] = {
+    "sd:/switch/tinfoil/db",
+    NULL
+};
+
 // Old version marker files to delete (clean install only)
 static const char* old_version_files_to_delete[] = {
-    "sd:/1.0.0l",
-    "sd:/1.0.0s",
-    "sd:/1.0.0oc",
     "sd:/1.4.0-pre",
     "sd:/1.4.0-pre-c",
     "sd:/1.4.0-pre-d",
     "sd:/1.4.1",
     "sd:/1.5.0",
     "sd:/1.6.0",
+    "sd:/1.6.1",
+    "sd:/1.6.2",
     NULL
 };

source/deletion_lists_update.h

@@ -10,14 +10,16 @@ static const char* atmosphere_dirs_to_delete[] = {
     "sd:/atmosphere/config",
     "sd:/atmosphere/crash_reports",
     "sd:/atmosphere/erpt_reports",
+    "sd:/atmosphere/exefs_patches/audio_mastervolume",
     "sd:/atmosphere/exefs_patches/CrunchPatch",
+    "sd:/atmosphere/exefs_patches/SaltyNX_Fixes",
     "sd:/atmosphere/exefs_patches/Crunchyroll Patch 1.10.0",
     "sd:/atmosphere/exefs_patches/bluetooth_patches",
     "sd:/atmosphere/exefs_patches/bootlogo",
     "sd:/atmosphere/exefs_patches/btm_patches",
     "sd:/atmosphere/exefs_patches/es_patches",
     "sd:/atmosphere/exefs_patches/hid_patches",
-    "sd:/atmosphere/exefs_patches/logo1",
+    "sd:/atmosphere/exefs_patches/logo",
     "sd:/atmosphere/exefs_patches/nfim_ctest",
     "sd:/atmosphere/exefs_patches/nim_ctest",
     "sd:/atmosphere/exefs_patches/nvnflinger_cmu",
@@ -80,6 +82,8 @@ static const char* atmosphere_files_to_delete[] = {
     "sd:/atmosphere/package3",
     "sd:/atmosphere/reboot_payload.bin",
     "sd:/atmosphere/stratosphere.romfs",
+    "sd:/atmosphere/kips/loader.kip",
+    "sd:/atmosphere/kips/hoc.kip",
     NULL
 };
 
@@ -130,17 +134,19 @@ static const char* switch_dirs_to_delete[] = {
     "sd:/switch/amsPLUS-downloader",
     "sd:/switch/appstore",
     "sd:/switch/AtmoXL-Titel-Installer",
+    "sd:/switch/Benchmark-Toolbox",
     "sd:/switch/breeze",
-    "sd:/switch/checkpoint",
     "sd:/switch/cheats-updater",
     "sd:/switch/chiaki",
     "sd:/switch/ChoiDujourNX",
     "sd:/switch/crash_ams",
     "sd:/switch/Daybreak",
+    "sd:/switch/DNS-Block_Tester",
     "sd:/switch/DNS_mitm Tester",
     "sd:/switch/EdiZon",
     "sd:/switch/Fizeau",
     "sd:/switch/FTPD",
+    "sd:/switch/Furmark-NX",
     "sd:/switch/fw-downloader",
     "sd:/switch/gamecard_installer",
     "sd:/switch/Goldleaf",
@@ -165,6 +171,7 @@ static const char* switch_dirs_to_delete[] = {
     "sd:/switch/reboot_to_argonNX",
     "sd:/switch/reboot_to_hekate",
     "sd:/switch/Shutdown_System",
+    "sd:/switch/SimpleModAlchemist",
     "sd:/switch/SimpleModDownloader",
     "sd:/switch/SimpleModManager",
     "sd:/switch/sphaira",
@@ -172,18 +179,22 @@ static const char* switch_dirs_to_delete[] = {
     "sd:/switch/Switch-Time",
     "sd:/switch/SwitchIdent",
     "sd:/switch/Switch_themes_Installer",
+    "sd:/switch/swr-ini-tool",
     "sd:/switch/Sys-Clk Manager",
     "sd:/switch/Sys-Con",
     "sd:/switch/sys-clk-manager",
     "sd:/switch/themezer-nx",
+    "sd:/switch/ThemezerNX",
     "sd:/switch/themezernx",
     "sd:/switch/tinwoo",
+    "sd:/switch/Ultrahand-Reload",
     NULL
 };
 
 // Switch files (NRO) to delete
 static const char* switch_files_to_delete[] = {
     "sd:/switch/90DNS_tester/90DNS_tester.nro",
+    "sd:/switch/Benchmark-Toolbox/Benchmark-Toolbox.nro",
     "sd:/switch/breeze.nro",
     "sd:/switch/cheats-updater.nro",
     "sd:/switch/chiaki.nro",
@@ -203,9 +214,11 @@ static const char* switch_files_to_delete[] = {
     "sd:/switch/DBI_RU/DBI_RU.nro",
     "sd:/switch/DBI/DBI_EN.nro",
     "sd:/switch/DBI_DE/DBI_DE.nro",
+    "sd:/switch/DNS-Block_Tester/dns_tester.nro",
     "sd:/switch/DNS_mitm Tester.nro",
     "sd:/switch/EdiZon.nro",
     "sd:/switch/Fizeau.nro",
+    "sd:/switch/Furmark-NX/Furmark-NX.nro",
     "sd:/switch/Goldleaf.nro",
     "sd:/switch/haze.nro",
     "sd:/switch/JKSV.nro",
@@ -219,6 +232,7 @@ static const char* switch_files_to_delete[] = {
     "sd:/switch/nxdumptool.nro",
     "sd:/switch/nxtc.bin",
     "sd:/switch/reboot_to_payload.nro",
+    "sd:/switch/SimpleModAlchemist/Simple_Mod_Alchemist.nro",
     "sd:/switch/SimpleModDownloader.nro",
     "sd:/switch/SimpleModManager.nro",
     "sd:/switch/sphaira.nro",
@@ -228,10 +242,12 @@ static const char* switch_files_to_delete[] = {
     "sd:/switch/Sys-Clk Manager/sys-clk-manager.nro",
     "sd:/switch/Sys-Con.nro",
     "sd:/switch/sys-clk-manager.nro",
+    "sd:/switch/ThemezerNX/themezer-nx.nro",
     "sd:/switch/tinfoil.nro",
     "sd:/switch/tinfoil/tinfoil.nro",
     "sd:/switch/tinwoo.nro",
     "sd:/switch/tinwoo/tinwoo.nro",
+    "sd:/switch/Ultrahand-Reload/Ultrahand-Reload.nro",
     NULL
 };
 
@@ -261,6 +277,7 @@ static const char* misc_dirs_to_delete[] = {
     "sd:/SaltySD/flags",
     "sd:/scripts",
     "sd:/switch/tinfoil/db",
+    "sd:/themes/systemData",
     "sd:/tools",
     "sd:/warmboot_mariko",
     NULL

source/fs.c

@@ -1,351 +1,351 @@
-/*
- * OmniNX Installer - Filesystem operations with file logging
- * Based on HATS Installer
- */
-
-#include "fs.h"
-#include <libs/fatfs/ff.h>
-#include <mem/heap.h>
-#include <string.h>
-#include <utils/sprintf.h>
-#include <stdarg.h>
-#include <stdio.h>
-
-#define FS_BUFFER_SIZE 0x100000  // 1MB copy buffer
-#define LOG_BUFFER_SIZE 512
-
-// Log file handle
-static FIL log_file;
-static bool log_enabled = false;
-static char log_buf[LOG_BUFFER_SIZE];
-
-// Initialize log file
-void log_init(const char *path) {
-    int res = f_open(&log_file, path, FA_WRITE | FA_CREATE_ALWAYS);
-    if (res == FR_OK) {
-        log_enabled = true;
-        log_write("=== OmniNX Installer Log ===\n\n");
-    }
-}
-
-// Close log file
-void log_close(void) {
-    if (log_enabled) {
-        f_sync(&log_file);
-        f_close(&log_file);
-        log_enabled = false;
-    }
-}
-
-// Write to log file (variadic version)
-void log_write(const char *fmt, ...) {
-    if (!log_enabled) return;
-
-    va_list args;
-    va_start(args, fmt);
-
-    // Format the message
-    vsnprintf(log_buf, LOG_BUFFER_SIZE, fmt, args);
-
-    va_end(args);
-
-    // Write to file
-    UINT bw;
-    f_write(&log_file, log_buf, strlen(log_buf), &bw);
-    f_sync(&log_file);  // Flush to ensure data is written
-}
-
-// Convert FatFS error code to string
-const char *fs_error_str(int err) {
-    switch (err) {
-        case FR_OK:                  return "OK";
-        case FR_DISK_ERR:            return "DISK_ERR: Low level disk error";
-        case FR_INT_ERR:             return "INT_ERR: Internal error";
-        case FR_NOT_READY:           return "NOT_READY: Drive not ready";
-        case FR_NO_FILE:             return "NO_FILE: File not found";
-        case FR_NO_PATH:             return "NO_PATH: Path not found";
-        case FR_INVALID_NAME:        return "INVALID_NAME: Invalid path name";
-        case FR_DENIED:              return "DENIED: Access denied";
-        case FR_EXIST:               return "EXIST: Already exists";
-        case FR_INVALID_OBJECT:      return "INVALID_OBJECT: Invalid object";
-        case FR_WRITE_PROTECTED:     return "WRITE_PROTECTED: Write protected";
-        case FR_INVALID_DRIVE:       return "INVALID_DRIVE: Invalid drive";
-        case FR_NOT_ENABLED:         return "NOT_ENABLED: Volume not mounted";
-        case FR_NO_FILESYSTEM:       return "NO_FILESYSTEM: No valid FAT";
-        case FR_MKFS_ABORTED:        return "MKFS_ABORTED: mkfs aborted";
-        case FR_TIMEOUT:             return "TIMEOUT: Timeout";
-        case FR_LOCKED:              return "LOCKED: File locked";
-        case FR_NOT_ENOUGH_CORE:     return "NOT_ENOUGH_CORE: Out of memory";
-        case FR_TOO_MANY_OPEN_FILES: return "TOO_MANY_OPEN_FILES";
-        case FR_INVALID_PARAMETER:   return "INVALID_PARAMETER";
-        default:                     return "UNKNOWN_ERROR";
-    }
-}
-
-// Combine two paths
-static char *combine_paths(const char *base, const char *add) {
-    size_t base_len = strlen(base);
-    size_t add_len = strlen(add);
-    char *result = malloc(base_len + add_len + 2);
-
-    if (!result) return NULL;
-
-    if (base_len > 0 && base[base_len - 1] == '/') {
-        s_printf(result, "%s%s", base, add);
-    } else {
-        s_printf(result, "%s/%s", base, add);
-    }
-
-    return result;
-}
-
-// Copy a single file with logging
-int file_copy(const char *src, const char *dst) {
-    FIL fin, fout;
-    FILINFO fno;
-    int res;
-
-    log_write("COPY: %s -> %s\n", src, dst);
-
-    res = f_open(&fin, src, FA_READ | FA_OPEN_EXISTING);
-    if (res != FR_OK) {
-        log_write("  ERROR open src: %s\n", fs_error_str(res));
-        return res;
-    }
-
-    f_stat(src, &fno);
-    u64 file_size = f_size(&fin);
-    log_write("  Size: %d bytes\n", (u32)file_size);
-
-    res = f_open(&fout, dst, FA_WRITE | FA_CREATE_ALWAYS);
-    if (res != FR_OK) {
-        f_close(&fin);
-        log_write("  ERROR open dst: %s\n", fs_error_str(res));
-        return res;
-    }
-
-    u8 *buf = malloc(FS_BUFFER_SIZE);
-    if (!buf) {
-        f_close(&fin);
-        f_close(&fout);
-        log_write("  ERROR: Out of memory for buffer\n");
-        return FR_NOT_ENOUGH_CORE;
-    }
-
-    u64 remaining = file_size;
-    UINT br, bw;
-
-    while (remaining > 0) {
-        UINT to_copy = (remaining > FS_BUFFER_SIZE) ? FS_BUFFER_SIZE : (UINT)remaining;
-
-        res = f_read(&fin, buf, to_copy, &br);
-        if (res != FR_OK) {
-            log_write("  ERROR read: %s\n", fs_error_str(res));
-            break;
-        }
-        if (br != to_copy) {
-            log_write("  ERROR: Read %d bytes, expected %d\n", br, to_copy);
-            res = FR_DISK_ERR;
-            break;
-        }
-
-        res = f_write(&fout, buf, to_copy, &bw);
-        if (res != FR_OK) {
-            log_write("  ERROR write: %s\n", fs_error_str(res));
-            break;
-        }
-        if (bw != to_copy) {
-            log_write("  ERROR: Wrote %d bytes, expected %d\n", bw, to_copy);
-            res = FR_DISK_ERR;
-            break;
-        }
-
-        remaining -= to_copy;
-    }
-
-    free(buf);
-    f_close(&fin);
-    f_close(&fout);
-
-    if (res == FR_OK) {
-        f_chmod(dst, fno.fattrib, 0x3A);
-        log_write("  OK\n");
-    }
-
-    return res;
-}
-
-// Recursively delete a folder with logging
-int folder_delete(const char *path) {
-    DIR dir;
-    FILINFO fno;
-    int res;
-
-    log_write("DELETE: %s\n", path);
-
-    res = f_opendir(&dir, path);
-    if (res != FR_OK) {
-        // Maybe it's a file, try to delete it
-        log_write("  Not a dir, trying as file...\n");
-        res = f_unlink(path);
-        if (res != FR_OK) {
-            log_write("  ERROR unlink: %s\n", fs_error_str(res));
-        } else {
-            log_write("  OK (file deleted)\n");
-        }
-        return res;
-    }
-
-    int file_count = 0;
-    int dir_count = 0;
-
-    while (1) {
-        res = f_readdir(&dir, &fno);
-        if (res != FR_OK) {
-            log_write("  ERROR readdir: %s\n", fs_error_str(res));
-            break;
-        }
-        if (fno.fname[0] == 0) break;  // End of directory
-
-        char *full_path = combine_paths(path, fno.fname);
-        if (!full_path) {
-            res = FR_NOT_ENOUGH_CORE;
-            break;
-        }
-
-        if (fno.fattrib & AM_DIR) {
-            dir_count++;
-            res = folder_delete(full_path);
-        } else {
-            file_count++;
-            log_write("  DEL: %s\n", fno.fname);
-            
-            // Clear read-only attribute if set (common with some CFW packs)
-            if (fno.fattrib & AM_RDO) {
-                f_chmod(full_path, fno.fattrib & ~AM_RDO, AM_RDO);
-            }
-            
-            res = f_unlink(full_path);
-            if (res != FR_OK) {
-                log_write("    ERROR: %s\n", fs_error_str(res));
-            }
-        }
-
-        free(full_path);
-        if (res != FR_OK) break;
-    }
-
-    f_closedir(&dir);
-
-    if (res == FR_OK || res == FR_NO_FILE) {
-        log_write("  Removing dir: %s (%d files, %d subdirs)\n", path, file_count, dir_count);
-        
-        // Check and clear read-only attribute on directory if set
-        FILINFO dir_info;
-        if (f_stat(path, &dir_info) == FR_OK && (dir_info.fattrib & AM_RDO)) {
-            f_chmod(path, dir_info.fattrib & ~AM_RDO, AM_RDO);
-        }
-        
-        res = f_unlink(path);
-        if (res != FR_OK) {
-            log_write("  ERROR rmdir: %s\n", fs_error_str(res));
-        } else {
-            log_write("  OK\n");
-        }
-    }
-
-    return res;
-}
-
-// Recursively copy a folder with logging
-int folder_copy(const char *src, const char *dst) {
-    DIR dir;
-    FILINFO fno;
-    int res;
-
-    log_write("FOLDER COPY: %s -> %s\n", src, dst);
-
-    res = f_opendir(&dir, src);
-    if (res != FR_OK) {
-        log_write("  ERROR opendir src: %s\n", fs_error_str(res));
-        return res;
-    }
-
-    // Get folder name from src path
-    const char *folder_name = strrchr(src, '/');
-    if (folder_name) {
-        folder_name++;
-    } else {
-        folder_name = src;
-    }
-
-    // Create destination folder
-    char *dst_path = combine_paths(dst, folder_name);
-    if (!dst_path) {
-        f_closedir(&dir);
-        return FR_NOT_ENOUGH_CORE;
-    }
-
-    log_write("  Creating: %s\n", dst_path);
-
-    res = f_mkdir(dst_path);
-    if (res == FR_EXIST) {
-        log_write("  (already exists)\n");
-        res = FR_OK;
-    } else if (res != FR_OK) {
-        log_write("  ERROR mkdir: %s\n", fs_error_str(res));
-        f_closedir(&dir);
-        free(dst_path);
-        return res;
-    }
-
-    int file_count = 0;
-    int dir_count = 0;
-
-    // Copy contents
-    while (1) {
-        res = f_readdir(&dir, &fno);
-        if (res != FR_OK) {
-            log_write("  ERROR readdir: %s\n", fs_error_str(res));
-            break;
-        }
-        if (fno.fname[0] == 0) break;  // End of directory
-
-        char *src_full = combine_paths(src, fno.fname);
-        char *dst_full = combine_paths(dst_path, fno.fname);
-
-        if (!src_full || !dst_full) {
-            if (src_full) free(src_full);
-            if (dst_full) free(dst_full);
-            res = FR_NOT_ENOUGH_CORE;
-            break;
-        }
-
-        if (fno.fattrib & AM_DIR) {
-            dir_count++;
-            res = folder_copy(src_full, dst_path);
-        } else {
-            file_count++;
-            res = file_copy(src_full, dst_full);
-        }
-
-        free(src_full);
-        free(dst_full);
-
-        if (res != FR_OK) break;
-    }
-
-    f_closedir(&dir);
-
-    // Copy folder attributes
-    if (res == FR_OK) {
-        FILINFO src_info;
-        if (f_stat(src, &src_info) == FR_OK) {
-            f_chmod(dst_path, src_info.fattrib, 0x3A);
-        }
-        log_write("  Done: %d files, %d subdirs\n", file_count, dir_count);
-    }
-
-    free(dst_path);
-    return res;
-}
+/*
+ * OmniNX Installer - Filesystem operations with file logging
+ * Based on HATS Installer
+ */
+
+#include "fs.h"
+#include <libs/fatfs/ff.h>
+#include <mem/heap.h>
+#include <string.h>
+#include <utils/sprintf.h>
+#include <stdarg.h>
+#include <stdio.h>
+
+#define FS_BUFFER_SIZE 0x100000  // 1MB copy buffer
+#define LOG_BUFFER_SIZE 512
+
+// Log file handle
+static FIL log_file;
+static bool log_enabled = false;
+static char log_buf[LOG_BUFFER_SIZE];
+
+// Initialize log file
+void log_init(const char *path) {
+    int res = f_open(&log_file, path, FA_WRITE | FA_CREATE_ALWAYS);
+    if (res == FR_OK) {
+        log_enabled = true;
+        log_write("=== OmniNX Installer Log ===\n\n");
+    }
+}
+
+// Close log file
+void log_close(void) {
+    if (log_enabled) {
+        f_sync(&log_file);
+        f_close(&log_file);
+        log_enabled = false;
+    }
+}
+
+// Write to log file (variadic version)
+void log_write(const char *fmt, ...) {
+    if (!log_enabled) return;
+
+    va_list args;
+    va_start(args, fmt);
+
+    // Format the message
+    vsnprintf(log_buf, LOG_BUFFER_SIZE, fmt, args);
+
+    va_end(args);
+
+    // Write to file
+    UINT bw;
+    f_write(&log_file, log_buf, strlen(log_buf), &bw);
+    f_sync(&log_file);  // Flush to ensure data is written
+}
+
+// Convert FatFS error code to string
+const char *fs_error_str(int err) {
+    switch (err) {
+        case FR_OK:                  return "OK";
+        case FR_DISK_ERR:            return "DISK_ERR: Low level disk error";
+        case FR_INT_ERR:             return "INT_ERR: Internal error";
+        case FR_NOT_READY:           return "NOT_READY: Drive not ready";
+        case FR_NO_FILE:             return "NO_FILE: File not found";
+        case FR_NO_PATH:             return "NO_PATH: Path not found";
+        case FR_INVALID_NAME:        return "INVALID_NAME: Invalid path name";
+        case FR_DENIED:              return "DENIED: Access denied";
+        case FR_EXIST:               return "EXIST: Already exists";
+        case FR_INVALID_OBJECT:      return "INVALID_OBJECT: Invalid object";
+        case FR_WRITE_PROTECTED:     return "WRITE_PROTECTED: Write protected";
+        case FR_INVALID_DRIVE:       return "INVALID_DRIVE: Invalid drive";
+        case FR_NOT_ENABLED:         return "NOT_ENABLED: Volume not mounted";
+        case FR_NO_FILESYSTEM:       return "NO_FILESYSTEM: No valid FAT";
+        case FR_MKFS_ABORTED:        return "MKFS_ABORTED: mkfs aborted";
+        case FR_TIMEOUT:             return "TIMEOUT: Timeout";
+        case FR_LOCKED:              return "LOCKED: File locked";
+        case FR_NOT_ENOUGH_CORE:     return "NOT_ENOUGH_CORE: Out of memory";
+        case FR_TOO_MANY_OPEN_FILES: return "TOO_MANY_OPEN_FILES";
+        case FR_INVALID_PARAMETER:   return "INVALID_PARAMETER";
+        default:                     return "UNKNOWN_ERROR";
+    }
+}
+
+// Combine two paths
+static char *combine_paths(const char *base, const char *add) {
+    size_t base_len = strlen(base);
+    size_t add_len = strlen(add);
+    char *result = malloc(base_len + add_len + 2);
+
+    if (!result) return NULL;
+
+    if (base_len > 0 && base[base_len - 1] == '/') {
+        s_printf(result, "%s%s", base, add);
+    } else {
+        s_printf(result, "%s/%s", base, add);
+    }
+
+    return result;
+}
+
+// Copy a single file with logging
+int file_copy(const char *src, const char *dst) {
+    FIL fin, fout;
+    FILINFO fno;
+    int res;
+
+    log_write("COPY: %s -> %s\n", src, dst);
+
+    res = f_open(&fin, src, FA_READ | FA_OPEN_EXISTING);
+    if (res != FR_OK) {
+        log_write("  ERROR open src: %s\n", fs_error_str(res));
+        return res;
+    }
+
+    f_stat(src, &fno);
+    u64 file_size = f_size(&fin);
+    log_write("  Size: %d bytes\n", (u32)file_size);
+
+    res = f_open(&fout, dst, FA_WRITE | FA_CREATE_ALWAYS);
+    if (res != FR_OK) {
+        f_close(&fin);
+        log_write("  ERROR open dst: %s\n", fs_error_str(res));
+        return res;
+    }
+
+    u8 *buf = malloc(FS_BUFFER_SIZE);
+    if (!buf) {
+        f_close(&fin);
+        f_close(&fout);
+        log_write("  ERROR: Out of memory for buffer\n");
+        return FR_NOT_ENOUGH_CORE;
+    }
+
+    u64 remaining = file_size;
+    UINT br, bw;
+
+    while (remaining > 0) {
+        UINT to_copy = (remaining > FS_BUFFER_SIZE) ? FS_BUFFER_SIZE : (UINT)remaining;
+
+        res = f_read(&fin, buf, to_copy, &br);
+        if (res != FR_OK) {
+            log_write("  ERROR read: %s\n", fs_error_str(res));
+            break;
+        }
+        if (br != to_copy) {
+            log_write("  ERROR: Read %d bytes, expected %d\n", br, to_copy);
+            res = FR_DISK_ERR;
+            break;
+        }
+
+        res = f_write(&fout, buf, to_copy, &bw);
+        if (res != FR_OK) {
+            log_write("  ERROR write: %s\n", fs_error_str(res));
+            break;
+        }
+        if (bw != to_copy) {
+            log_write("  ERROR: Wrote %d bytes, expected %d\n", bw, to_copy);
+            res = FR_DISK_ERR;
+            break;
+        }
+
+        remaining -= to_copy;
+    }
+
+    free(buf);
+    f_close(&fin);
+    f_close(&fout);
+
+    if (res == FR_OK) {
+        f_chmod(dst, fno.fattrib, 0x3A);
+        log_write("  OK\n");
+    }
+
+    return res;
+}
+
+// Recursively delete a folder with logging
+int folder_delete(const char *path) {
+    DIR dir;
+    FILINFO fno;
+    int res;
+
+    log_write("DELETE: %s\n", path);
+
+    res = f_opendir(&dir, path);
+    if (res != FR_OK) {
+        // Maybe it's a file, try to delete it
+        log_write("  Not a dir, trying as file...\n");
+        res = f_unlink(path);
+        if (res != FR_OK) {
+            log_write("  ERROR unlink: %s\n", fs_error_str(res));
+        } else {
+            log_write("  OK (file deleted)\n");
+        }
+        return res;
+    }
+
+    int file_count = 0;
+    int dir_count = 0;
+
+    while (1) {
+        res = f_readdir(&dir, &fno);
+        if (res != FR_OK) {
+            log_write("  ERROR readdir: %s\n", fs_error_str(res));
+            break;
+        }
+        if (fno.fname[0] == 0) break;  // End of directory
+
+        char *full_path = combine_paths(path, fno.fname);
+        if (!full_path) {
+            res = FR_NOT_ENOUGH_CORE;
+            break;
+        }
+
+        if (fno.fattrib & AM_DIR) {
+            dir_count++;
+            res = folder_delete(full_path);
+        } else {
+            file_count++;
+            log_write("  DEL: %s\n", fno.fname);
+            
+            // Clear read-only attribute if set (common with some CFW packs)
+            if (fno.fattrib & AM_RDO) {
+                f_chmod(full_path, fno.fattrib & ~AM_RDO, AM_RDO);
+            }
+            
+            res = f_unlink(full_path);
+            if (res != FR_OK) {
+                log_write("    ERROR: %s\n", fs_error_str(res));
+            }
+        }
+
+        free(full_path);
+        if (res != FR_OK) break;
+    }
+
+    f_closedir(&dir);
+
+    if (res == FR_OK || res == FR_NO_FILE) {
+        log_write("  Removing dir: %s (%d files, %d subdirs)\n", path, file_count, dir_count);
+        
+        // Check and clear read-only attribute on directory if set
+        FILINFO dir_info;
+        if (f_stat(path, &dir_info) == FR_OK && (dir_info.fattrib & AM_RDO)) {
+            f_chmod(path, dir_info.fattrib & ~AM_RDO, AM_RDO);
+        }
+        
+        res = f_unlink(path);
+        if (res != FR_OK) {
+            log_write("  ERROR rmdir: %s\n", fs_error_str(res));
+        } else {
+            log_write("  OK\n");
+        }
+    }
+
+    return res;
+}
+
+// Recursively copy a folder with logging
+int folder_copy(const char *src, const char *dst) {
+    DIR dir;
+    FILINFO fno;
+    int res;
+
+    log_write("FOLDER COPY: %s -> %s\n", src, dst);
+
+    res = f_opendir(&dir, src);
+    if (res != FR_OK) {
+        log_write("  ERROR opendir src: %s\n", fs_error_str(res));
+        return res;
+    }
+
+    // Get folder name from src path
+    const char *folder_name = strrchr(src, '/');
+    if (folder_name) {
+        folder_name++;
+    } else {
+        folder_name = src;
+    }
+
+    // Create destination folder
+    char *dst_path = combine_paths(dst, folder_name);
+    if (!dst_path) {
+        f_closedir(&dir);
+        return FR_NOT_ENOUGH_CORE;
+    }
+
+    log_write("  Creating: %s\n", dst_path);
+
+    res = f_mkdir(dst_path);
+    if (res == FR_EXIST) {
+        log_write("  (already exists)\n");
+        res = FR_OK;
+    } else if (res != FR_OK) {
+        log_write("  ERROR mkdir: %s\n", fs_error_str(res));
+        f_closedir(&dir);
+        free(dst_path);
+        return res;
+    }
+
+    int file_count = 0;
+    int dir_count = 0;
+
+    // Copy contents
+    while (1) {
+        res = f_readdir(&dir, &fno);
+        if (res != FR_OK) {
+            log_write("  ERROR readdir: %s\n", fs_error_str(res));
+            break;
+        }
+        if (fno.fname[0] == 0) break;  // End of directory
+
+        char *src_full = combine_paths(src, fno.fname);
+        char *dst_full = combine_paths(dst_path, fno.fname);
+
+        if (!src_full || !dst_full) {
+            if (src_full) free(src_full);
+            if (dst_full) free(dst_full);
+            res = FR_NOT_ENOUGH_CORE;
+            break;
+        }
+
+        if (fno.fattrib & AM_DIR) {
+            dir_count++;
+            res = folder_copy(src_full, dst_path);
+        } else {
+            file_count++;
+            res = file_copy(src_full, dst_full);
+        }
+
+        free(src_full);
+        free(dst_full);
+
+        if (res != FR_OK) break;
+    }
+
+    f_closedir(&dir);
+
+    // Copy folder attributes
+    if (res == FR_OK) {
+        FILINFO src_info;
+        if (f_stat(src, &src_info) == FR_OK) {
+            f_chmod(dst_path, src_info.fattrib, 0x3A);
+        }
+        log_write("  Done: %d files, %d subdirs\n", file_count, dir_count);
+    }
+
+    free(dst_path);
+    return res;
+}

source/fs.h

@@ -1,20 +1,20 @@
-/*
- * OmniNX Installer - Filesystem operations
- * Based on HATS Installer
- */
-
-#pragma once
-#include <utils/types.h>
-
-// Error code to string
-const char *fs_error_str(int err);
-
-// File/folder operations - returns 0 on success
-int file_copy(const char *src, const char *dst);
-int folder_copy(const char *src, const char *dst);
-int folder_delete(const char *path);
-
-// File logging
-void log_init(const char *path);
-void log_close(void);
-void log_write(const char *fmt, ...);
+/*
+ * OmniNX Installer - Filesystem operations
+ * Based on HATS Installer
+ */
+
+#pragma once
+#include <utils/types.h>
+
+// Error code to string
+const char *fs_error_str(int err);
+
+// File/folder operations - returns 0 on success
+int file_copy(const char *src, const char *dst);
+int folder_copy(const char *src, const char *dst);
+int folder_delete(const char *path);
+
+// File logging
+void log_init(const char *path);
+void log_close(void);
+void log_write(const char *fmt, ...);

source/install.h

@@ -13,7 +13,10 @@ typedef enum {
     INSTALL_MODE_CLEAN     // No OmniNX - selective deletion from clean list
 } install_mode_t;
 
-// Main installation function
+// If a sub-menu aborts to Hekate / update.bin (does not return if launch succeeds)
+void installer_launch_hekate_payload(void);
+
+// Main installation function (optional debug: see DEBUG_INI.md in repo root)
 int perform_installation(omninx_variant_t pack_variant, install_mode_t mode);
 
 // Update mode operations (install_update.c)
@@ -29,6 +32,9 @@ int clean_mode_wipe(void);
 int clean_mode_restore(void);
 int clean_mode_install(omninx_variant_t variant);
 
+void install_preserve_update_cleanup_begin(void);
+void install_preserve_update_cleanup_end(void);
+
 // Shared helpers (install.c) - used by install_update.c and install_clean.c
 void install_set_color(u32 color);
 void install_check_and_clear_screen_if_needed(void);

source/install_clean.c

@@ -34,7 +34,7 @@
 // Clean mode: Backup user data
 int clean_mode_backup(void) {
     set_color(COLOR_CYAN);
-    gfx_printf("  Sichere: DBI, Tinfoil, prod.keys\n");
+    gfx_printf("  Sichere: CyberFoil, DBI (dbi.config), prod.keys\n");
     set_color(COLOR_WHITE);
     int res = backup_user_data();
     if (res == FR_OK) {
@@ -95,13 +95,14 @@ int clean_mode_wipe(void) {
 // Clean mode: Restore user data
 int clean_mode_restore(void) {
     set_color(COLOR_CYAN);
-    gfx_printf("  Stelle wieder her: DBI, Tinfoil, prod.keys\n");
+    gfx_printf("  Stelle wieder her: CyberFoil, DBI (dbi.config), prod.keys\n");
     set_color(COLOR_WHITE);
     int res = restore_user_data();
     if (res == FR_OK) {
         set_color(COLOR_GREEN);
         gfx_printf("  [OK] Wiederherstellung abgeschlossen\n");
         set_color(COLOR_WHITE);
+        delete_path_list(clean_post_restore_dirs_to_delete, "switch/ (nach Restore)");
     }
     cleanup_backup();
     return res;

source/install_update.c

@@ -12,10 +12,6 @@
 #include <string.h>
 #include <utils/sprintf.h>
 
-#ifndef VERSION
-#define VERSION "1.0.0"
-#endif
-
 #undef COLOR_CYAN
 #undef COLOR_WHITE
 #undef COLOR_GREEN
@@ -37,6 +33,8 @@
 // Update mode: Cleanup specific directories/files
 int update_mode_cleanup(omninx_variant_t variant) {
     (void)variant;
+    install_preserve_update_cleanup_begin();
+
     check_and_clear_screen_if_needed();
 
     set_color(COLOR_WHITE);
@@ -66,6 +64,8 @@ int update_mode_cleanup(omninx_variant_t variant) {
         misc_files_to_delete,
         NULL);
 
+    install_preserve_update_cleanup_end();
+
     set_color(COLOR_GREEN);
     gfx_printf("  Bereinigung abgeschlossen!\n");
     set_color(COLOR_WHITE);
@@ -119,6 +119,10 @@ int update_mode_install(omninx_variant_t variant) {
         if (res != FR_OK && res != FR_NO_FILE) return res;
     }
 
+    s_printf(src_path, "%s/extras", staging);
+    res = folder_copy_with_progress_v2(src_path, "sd:/", "extras/");
+    if (res != FR_OK && res != FR_NO_FILE) return res;
+
     set_color(COLOR_CYAN);
     gfx_printf("  Kopiere Root-Dateien...\n");
     set_color(COLOR_WHITE);

source/libs/fatfs/ffconf.h

@@ -1,294 +1,294 @@
-/*---------------------------------------------------------------------------/
-/  FatFs Functional Configurations
-/---------------------------------------------------------------------------*/
-
-#define FFCONF_DEF	86604	/* Revision ID */
-
-/*---------------------------------------------------------------------------/
-/ Function Configurations
-/---------------------------------------------------------------------------*/
-
-#define FF_FS_READONLY	0
-/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
-/  Read-only configuration removes writing API functions, f_write(), f_sync(),
-/  f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
-/  and optional writing functions as well. */
-
-
-#define FF_FS_MINIMIZE	0
-/* This option defines minimization level to remove some basic API functions.
-/
-/   0: Basic functions are fully enabled.
-/   1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
-/      are removed.
-/   2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
-/   3: f_lseek() function is removed in addition to 2. */
-
-
-#define FF_USE_STRFUNC	2
-/* This option switches string functions, f_gets(), f_putc(), f_puts() and f_printf().
-/
-/  0: Disable string functions.
-/  1: Enable without LF-CRLF conversion.
-/  2: Enable with LF-CRLF conversion. */
-
-
-#define FF_USE_FIND		1
-/* This option switches filtered directory read functions, f_findfirst() and
-/  f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
-
-
-#define FF_USE_MKFS		1
-/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
-
-#define FF_FASTFS		0
-
-#if FF_FASTFS
-#define FF_USE_FASTSEEK	1
-#else
-#define FF_USE_FASTSEEK	0
-#endif
-/* This option switches fast seek function. (0:Disable or 1:Enable) */
-
-
-#define FF_USE_EXPAND	0
-/* This option switches f_expand function. (0:Disable or 1:Enable) */
-
-
-#define FF_USE_CHMOD	1
-/* This option switches attribute manipulation functions, f_chmod() and f_utime().
-/  (0:Disable or 1:Enable) Also FF_FS_READONLY needs to be 0 to enable this option. */
-
-
-#define FF_USE_LABEL	0
-/* This option switches volume label functions, f_getlabel() and f_setlabel().
-/  (0:Disable or 1:Enable) */
-
-
-#define FF_USE_FORWARD	0
-/* This option switches f_forward() function. (0:Disable or 1:Enable) */
-
-
-/*---------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/---------------------------------------------------------------------------*/
-
-#define FF_CODE_PAGE	850
-/* This option specifies the OEM code page to be used on the target system.
-/  Incorrect code page setting can cause a file open failure.
-/
-/   437 - U.S.
-/   720 - Arabic
-/   737 - Greek
-/   771 - KBL
-/   775 - Baltic
-/   850 - Latin 1
-/   852 - Latin 2
-/   855 - Cyrillic
-/   857 - Turkish
-/   860 - Portuguese
-/   861 - Icelandic
-/   862 - Hebrew
-/   863 - Canadian French
-/   864 - Arabic
-/   865 - Nordic
-/   866 - Russian
-/   869 - Greek 2
-/   932 - Japanese (DBCS)
-/   936 - Simplified Chinese (DBCS)
-/   949 - Korean (DBCS)
-/   950 - Traditional Chinese (DBCS)
-/     0 - Include all code pages above and configured by f_setcp()
-*/
-
-
-#define FF_USE_LFN		3
-#define FF_MAX_LFN		255
-/* The FF_USE_LFN switches the support for LFN (long file name).
-/
-/   0: Disable LFN. FF_MAX_LFN has no effect.
-/   1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
-/   2: Enable LFN with dynamic working buffer on the STACK.
-/   3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/  To enable the LFN, ffunicode.c needs to be added to the project. The LFN function
-/  requiers certain internal working buffer occupies (FF_MAX_LFN + 1) * 2 bytes and
-/  additional (FF_MAX_LFN + 44) / 15 * 32 bytes when exFAT is enabled.
-/  The FF_MAX_LFN defines size of the working buffer in UTF-16 code unit and it can
-/  be in range of 12 to 255. It is recommended to be set 255 to fully support LFN
-/  specification.
-/  When use stack for the working buffer, take care on stack overflow. When use heap
-/  memory for the working buffer, memory management functions, ff_memalloc() and
-/  ff_memfree() in ffsystem.c, need to be added to the project. */
-
-
-#define FF_LFN_UNICODE	0
-/* This option switches the character encoding on the API when LFN is enabled.
-/
-/   0: ANSI/OEM in current CP (TCHAR = char)
-/   1: Unicode in UTF-16 (TCHAR = WCHAR)
-/   2: Unicode in UTF-8 (TCHAR = char)
-/   3: Unicode in UTF-32 (TCHAR = DWORD)
-/
-/  Also behavior of string I/O functions will be affected by this option.
-/  When LFN is not enabled, this option has no effect. */
-
-
-#define FF_LFN_BUF		255
-#define FF_SFN_BUF		12
-/* This set of options defines size of file name members in the FILINFO structure
-/  which is used to read out directory items. These values should be suffcient for
-/  the file names to read. The maximum possible length of the read file name depends
-/  on character encoding. When LFN is not enabled, these options have no effect. */
-
-
-#define FF_STRF_ENCODE	0
-/* When FF_LFN_UNICODE >= 1 with LFN enabled, string I/O functions, f_gets(),
-/  f_putc(), f_puts and f_printf() convert the character encoding in it.
-/  This option selects assumption of character encoding ON THE FILE to be
-/  read/written via those functions.
-/
-/   0: ANSI/OEM in current CP
-/   1: Unicode in UTF-16LE
-/   2: Unicode in UTF-16BE
-/   3: Unicode in UTF-8
-*/
-
-
-#define FF_FS_RPATH		0
-/* This option configures support for relative path.
-/
-/   0: Disable relative path and remove related functions.
-/   1: Enable relative path. f_chdir() and f_chdrive() are available.
-/   2: f_getcwd() function is available in addition to 1.
-*/
-
-
-/*---------------------------------------------------------------------------/
-/ Drive/Volume Configurations
-/---------------------------------------------------------------------------*/
-
-#define FF_VOLUMES		4
-/* Number of volumes (logical drives) to be used. (1-10) */
-
-
-#define FF_STR_VOLUME_ID	1
-// Order is important. Any change to order, must also be reflected to diskio drive enum.
-#define FF_VOLUME_STRS		"sd","ram","emmc","bis"
-/* FF_STR_VOLUME_ID switches support for volume ID in arbitrary strings.
-/  When FF_STR_VOLUME_ID is set to 1 or 2, arbitrary strings can be used as drive
-/  number in the path name. FF_VOLUME_STRS defines the volume ID strings for each
-/  logical drives. Number of items must not be less than FF_VOLUMES. Valid
-/  characters for the volume ID strings are A-Z, a-z and 0-9, however, they are
-/  compared in case-insensitive. If FF_STR_VOLUME_ID >= 1 and FF_VOLUME_STRS is
-/  not defined, a user defined volume string table needs to be defined as:
-/
-/  const char* VolumeStr[FF_VOLUMES] = {"ram","flash","sd","usb",...
-*/
-
-
-#define FF_MULTI_PARTITION	0
-/* This option switches support for multiple volumes on the physical drive.
-/  By default (0), each logical drive number is bound to the same physical drive
-/  number and only an FAT volume found on the physical drive will be mounted.
-/  When this function is enabled (1), each logical drive number can be bound to
-/  arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
-/  funciton will be available. */
-
-
-#define FF_MIN_SS		512
-#define FF_MAX_SS		512
-/* This set of options configures the range of sector size to be supported. (512,
-/  1024, 2048 or 4096) Always set both 512 for most systems, generic memory card and
-/  harddisk. But a larger value may be required for on-board flash memory and some
-/  type of optical media. When FF_MAX_SS is larger than FF_MIN_SS, FatFs is configured
-/  for variable sector size mode and disk_ioctl() function needs to implement
-/  GET_SECTOR_SIZE command. */
-
-
-#define FF_USE_TRIM		0
-/* This option switches support for ATA-TRIM. (0:Disable or 1:Enable)
-/  To enable Trim function, also CTRL_TRIM command should be implemented to the
-/  disk_ioctl() function. */
-
-
-#define FF_FS_NOFSINFO	1
-/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
-/  option, and f_getfree() function at first time after volume mount will force
-/  a full FAT scan. Bit 1 controls the use of last allocated cluster number.
-/
-/  bit0=0: Use free cluster count in the FSINFO if available.
-/  bit0=1: Do not trust free cluster count in the FSINFO.
-/  bit1=0: Use last allocated cluster number in the FSINFO if available.
-/  bit1=1: Do not trust last allocated cluster number in the FSINFO.
-*/
-
-
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/---------------------------------------------------------------------------*/
-
-#define FF_FS_TINY		0
-/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
-/  At the tiny configuration, size of file object (FIL) is shrinked FF_MAX_SS bytes.
-/  Instead of private sector buffer eliminated from the file object, common sector
-/  buffer in the filesystem object (FATFS) is used for the file data transfer. */
-
-
-#define FF_FS_EXFAT		1
-/* This option switches support for exFAT filesystem. (0:Disable or 1:Enable)
-/  To enable exFAT, also LFN needs to be enabled. (FF_USE_LFN >= 1)
-/  Note that enabling exFAT discards ANSI C (C89) compatibility. */
-
-
-#define FF_FS_NORTC		1
-#define FF_NORTC_MON	1
-#define FF_NORTC_MDAY	1
-#define FF_NORTC_YEAR	2020
-/* The option FF_FS_NORTC switches timestamp function. If the system does not have
-/  any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable
-/  the timestamp function. Every object modified by FatFs will have a fixed timestamp
-/  defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time.
-/  To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be
-/  added to the project to read current time form real-time clock. FF_NORTC_MON,
-/  FF_NORTC_MDAY and FF_NORTC_YEAR have no effect.
-/  These options have no effect at read-only configuration (FF_FS_READONLY = 1). */
-
-
-#define FF_FS_LOCK		0
-/* The option FF_FS_LOCK switches file lock function to control duplicated file open
-/  and illegal operation to open objects. This option must be 0 when FF_FS_READONLY
-/  is 1.
-/
-/  0:  Disable file lock function. To avoid volume corruption, application program
-/      should avoid illegal open, remove and rename to the open objects.
-/  >0: Enable file lock function. The value defines how many files/sub-directories
-/      can be opened simultaneously under file lock control. Note that the file
-/      lock control is independent of re-entrancy. */
-
-
-/* #include <somertos.h>	// O/S definitions */
-#define FF_FS_REENTRANT	0
-#define FF_FS_TIMEOUT	1000
-#define FF_SYNC_t		HANDLE
-/* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
-/  module itself. Note that regardless of this option, file access to different
-/  volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
-/  and f_fdisk() function, are always not re-entrant. Only file/directory access
-/  to the same volume is under control of this function.
-/
-/   0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect.
-/   1: Enable re-entrancy. Also user provided synchronization handlers,
-/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
-/      function, must be added to the project. Samples are available in
-/      option/syscall.c.
-/
-/  The FF_FS_TIMEOUT defines timeout period in unit of time tick.
-/  The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/  SemaphoreHandle_t and etc. A header file for O/S definitions needs to be
-/  included somewhere in the scope of ff.h. */
-
-
-
-/*--- End of configuration options ---*/
+/*---------------------------------------------------------------------------/
+/  FatFs Functional Configurations
+/---------------------------------------------------------------------------*/
+
+#define FFCONF_DEF	86604	/* Revision ID */
+
+/*---------------------------------------------------------------------------/
+/ Function Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_FS_READONLY	0
+/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
+/  Read-only configuration removes writing API functions, f_write(), f_sync(),
+/  f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
+/  and optional writing functions as well. */
+
+
+#define FF_FS_MINIMIZE	0
+/* This option defines minimization level to remove some basic API functions.
+/
+/   0: Basic functions are fully enabled.
+/   1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
+/      are removed.
+/   2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/   3: f_lseek() function is removed in addition to 2. */
+
+
+#define FF_USE_STRFUNC	2
+/* This option switches string functions, f_gets(), f_putc(), f_puts() and f_printf().
+/
+/  0: Disable string functions.
+/  1: Enable without LF-CRLF conversion.
+/  2: Enable with LF-CRLF conversion. */
+
+
+#define FF_USE_FIND		1
+/* This option switches filtered directory read functions, f_findfirst() and
+/  f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
+
+
+#define FF_USE_MKFS		1
+/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
+
+#define FF_FASTFS		0
+
+#if FF_FASTFS
+#define FF_USE_FASTSEEK	1
+#else
+#define FF_USE_FASTSEEK	0
+#endif
+/* This option switches fast seek function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_EXPAND	0
+/* This option switches f_expand function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_CHMOD	1
+/* This option switches attribute manipulation functions, f_chmod() and f_utime().
+/  (0:Disable or 1:Enable) Also FF_FS_READONLY needs to be 0 to enable this option. */
+
+
+#define FF_USE_LABEL	0
+/* This option switches volume label functions, f_getlabel() and f_setlabel().
+/  (0:Disable or 1:Enable) */
+
+
+#define FF_USE_FORWARD	0
+/* This option switches f_forward() function. (0:Disable or 1:Enable) */
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_CODE_PAGE	850
+/* This option specifies the OEM code page to be used on the target system.
+/  Incorrect code page setting can cause a file open failure.
+/
+/   437 - U.S.
+/   720 - Arabic
+/   737 - Greek
+/   771 - KBL
+/   775 - Baltic
+/   850 - Latin 1
+/   852 - Latin 2
+/   855 - Cyrillic
+/   857 - Turkish
+/   860 - Portuguese
+/   861 - Icelandic
+/   862 - Hebrew
+/   863 - Canadian French
+/   864 - Arabic
+/   865 - Nordic
+/   866 - Russian
+/   869 - Greek 2
+/   932 - Japanese (DBCS)
+/   936 - Simplified Chinese (DBCS)
+/   949 - Korean (DBCS)
+/   950 - Traditional Chinese (DBCS)
+/     0 - Include all code pages above and configured by f_setcp()
+*/
+
+
+#define FF_USE_LFN		3
+#define FF_MAX_LFN		255
+/* The FF_USE_LFN switches the support for LFN (long file name).
+/
+/   0: Disable LFN. FF_MAX_LFN has no effect.
+/   1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
+/   2: Enable LFN with dynamic working buffer on the STACK.
+/   3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/  To enable the LFN, ffunicode.c needs to be added to the project. The LFN function
+/  requiers certain internal working buffer occupies (FF_MAX_LFN + 1) * 2 bytes and
+/  additional (FF_MAX_LFN + 44) / 15 * 32 bytes when exFAT is enabled.
+/  The FF_MAX_LFN defines size of the working buffer in UTF-16 code unit and it can
+/  be in range of 12 to 255. It is recommended to be set 255 to fully support LFN
+/  specification.
+/  When use stack for the working buffer, take care on stack overflow. When use heap
+/  memory for the working buffer, memory management functions, ff_memalloc() and
+/  ff_memfree() in ffsystem.c, need to be added to the project. */
+
+
+#define FF_LFN_UNICODE	0
+/* This option switches the character encoding on the API when LFN is enabled.
+/
+/   0: ANSI/OEM in current CP (TCHAR = char)
+/   1: Unicode in UTF-16 (TCHAR = WCHAR)
+/   2: Unicode in UTF-8 (TCHAR = char)
+/   3: Unicode in UTF-32 (TCHAR = DWORD)
+/
+/  Also behavior of string I/O functions will be affected by this option.
+/  When LFN is not enabled, this option has no effect. */
+
+
+#define FF_LFN_BUF		255
+#define FF_SFN_BUF		12
+/* This set of options defines size of file name members in the FILINFO structure
+/  which is used to read out directory items. These values should be suffcient for
+/  the file names to read. The maximum possible length of the read file name depends
+/  on character encoding. When LFN is not enabled, these options have no effect. */
+
+
+#define FF_STRF_ENCODE	0
+/* When FF_LFN_UNICODE >= 1 with LFN enabled, string I/O functions, f_gets(),
+/  f_putc(), f_puts and f_printf() convert the character encoding in it.
+/  This option selects assumption of character encoding ON THE FILE to be
+/  read/written via those functions.
+/
+/   0: ANSI/OEM in current CP
+/   1: Unicode in UTF-16LE
+/   2: Unicode in UTF-16BE
+/   3: Unicode in UTF-8
+*/
+
+
+#define FF_FS_RPATH		0
+/* This option configures support for relative path.
+/
+/   0: Disable relative path and remove related functions.
+/   1: Enable relative path. f_chdir() and f_chdrive() are available.
+/   2: f_getcwd() function is available in addition to 1.
+*/
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_VOLUMES		4
+/* Number of volumes (logical drives) to be used. (1-10) */
+
+
+#define FF_STR_VOLUME_ID	1
+// Order is important. Any change to order, must also be reflected to diskio drive enum.
+#define FF_VOLUME_STRS		"sd","ram","emmc","bis"
+/* FF_STR_VOLUME_ID switches support for volume ID in arbitrary strings.
+/  When FF_STR_VOLUME_ID is set to 1 or 2, arbitrary strings can be used as drive
+/  number in the path name. FF_VOLUME_STRS defines the volume ID strings for each
+/  logical drives. Number of items must not be less than FF_VOLUMES. Valid
+/  characters for the volume ID strings are A-Z, a-z and 0-9, however, they are
+/  compared in case-insensitive. If FF_STR_VOLUME_ID >= 1 and FF_VOLUME_STRS is
+/  not defined, a user defined volume string table needs to be defined as:
+/
+/  const char* VolumeStr[FF_VOLUMES] = {"ram","flash","sd","usb",...
+*/
+
+
+#define FF_MULTI_PARTITION	0
+/* This option switches support for multiple volumes on the physical drive.
+/  By default (0), each logical drive number is bound to the same physical drive
+/  number and only an FAT volume found on the physical drive will be mounted.
+/  When this function is enabled (1), each logical drive number can be bound to
+/  arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
+/  funciton will be available. */
+
+
+#define FF_MIN_SS		512
+#define FF_MAX_SS		512
+/* This set of options configures the range of sector size to be supported. (512,
+/  1024, 2048 or 4096) Always set both 512 for most systems, generic memory card and
+/  harddisk. But a larger value may be required for on-board flash memory and some
+/  type of optical media. When FF_MAX_SS is larger than FF_MIN_SS, FatFs is configured
+/  for variable sector size mode and disk_ioctl() function needs to implement
+/  GET_SECTOR_SIZE command. */
+
+
+#define FF_USE_TRIM		0
+/* This option switches support for ATA-TRIM. (0:Disable or 1:Enable)
+/  To enable Trim function, also CTRL_TRIM command should be implemented to the
+/  disk_ioctl() function. */
+
+
+#define FF_FS_NOFSINFO	1
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
+/  option, and f_getfree() function at first time after volume mount will force
+/  a full FAT scan. Bit 1 controls the use of last allocated cluster number.
+/
+/  bit0=0: Use free cluster count in the FSINFO if available.
+/  bit0=1: Do not trust free cluster count in the FSINFO.
+/  bit1=0: Use last allocated cluster number in the FSINFO if available.
+/  bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_FS_TINY		0
+/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
+/  At the tiny configuration, size of file object (FIL) is shrinked FF_MAX_SS bytes.
+/  Instead of private sector buffer eliminated from the file object, common sector
+/  buffer in the filesystem object (FATFS) is used for the file data transfer. */
+
+
+#define FF_FS_EXFAT		1
+/* This option switches support for exFAT filesystem. (0:Disable or 1:Enable)
+/  To enable exFAT, also LFN needs to be enabled. (FF_USE_LFN >= 1)
+/  Note that enabling exFAT discards ANSI C (C89) compatibility. */
+
+
+#define FF_FS_NORTC		1
+#define FF_NORTC_MON	7
+#define FF_NORTC_MDAY	17
+#define FF_NORTC_YEAR	2026
+/* The option FF_FS_NORTC switches timestamp function. If the system does not have
+/  any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable
+/  the timestamp function. Every object modified by FatFs will have a fixed timestamp
+/  defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time.
+/  To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be
+/  added to the project to read current time form real-time clock. FF_NORTC_MON,
+/  FF_NORTC_MDAY and FF_NORTC_YEAR have no effect.
+/  These options have no effect at read-only configuration (FF_FS_READONLY = 1). */
+
+
+#define FF_FS_LOCK		0
+/* The option FF_FS_LOCK switches file lock function to control duplicated file open
+/  and illegal operation to open objects. This option must be 0 when FF_FS_READONLY
+/  is 1.
+/
+/  0:  Disable file lock function. To avoid volume corruption, application program
+/      should avoid illegal open, remove and rename to the open objects.
+/  >0: Enable file lock function. The value defines how many files/sub-directories
+/      can be opened simultaneously under file lock control. Note that the file
+/      lock control is independent of re-entrancy. */
+
+
+/* #include <somertos.h>	// O/S definitions */
+#define FF_FS_REENTRANT	0
+#define FF_FS_TIMEOUT	1000
+#define FF_SYNC_t		HANDLE
+/* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
+/  module itself. Note that regardless of this option, file access to different
+/  volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
+/  and f_fdisk() function, are always not re-entrant. Only file/directory access
+/  to the same volume is under control of this function.
+/
+/   0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect.
+/   1: Enable re-entrancy. Also user provided synchronization handlers,
+/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/      function, must be added to the project. Samples are available in
+/      option/syscall.c.
+/
+/  The FF_FS_TIMEOUT defines timeout period in unit of time tick.
+/  The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
+/  SemaphoreHandle_t and etc. A header file for O/S definitions needs to be
+/  included somewhere in the scope of ff.h. */
+
+
+
+/*--- End of configuration options ---*/

source/main.c

@@ -6,10 +6,6 @@
  * Based on TegraExplorer/hekate by CTCaer, naehrwert, shchmue
  */
 
-#ifndef VERSION
-#define VERSION "1.0.0"
-#endif
-
 #include <string.h>
 
 #include <display/di.h>
@@ -145,7 +141,7 @@ static int launch_payload(const char *path) {
     if (sd_mount()) {
         FIL fp;
         if (f_open(&fp, path, FA_READ)) {
-            gfx_printf("Payload nicht gefunden: %s\n", path);
+            gfx_printf("Hekate nicht gefunden: %s\n", path);
             return 1;
         }
 
@@ -189,6 +185,12 @@ static int file_exists(const char *path) {
     return (f_stat(path, &fno) == FR_OK);
 }
 
+void installer_launch_hekate_payload(void) {
+    if (file_exists(PAYLOAD_PATH))
+        launch_payload(PAYLOAD_PATH);
+    power_set_state(POWER_OFF_REBOOT);
+}
+
 extern void pivot_stack(u32 stack_top);
 
 void ipl_main(void) {
@@ -295,7 +297,7 @@ void ipl_main(void) {
         if (file_exists(PAYLOAD_PATH)) {
             gfx_printf("\n");
             set_color(COLOR_CYAN);
-            gfx_printf("Payload wird gestartet...\n");
+            gfx_printf("Hekate wird gestartet...\n");
             set_color(COLOR_WHITE);
             msleep(500);
             launch_payload(PAYLOAD_PATH);
@@ -474,7 +476,8 @@ void ipl_main(void) {
     gfx_con_setpos(0, 0);
     print_header();
     
-    // UHS class check: recommend U2 / V30 / A2 for emuMMC (speed and reliability)
+    // UHS class check: recommend U2 / V30 / A2 for emuMMC (clean install only)
+    if (mode == INSTALL_MODE_CLEAN) {
     #define UHS_U2_MIN  2
     #define UHS_V30_MIN 30
     #define UHS_A2_MIN  2
@@ -551,6 +554,7 @@ void ipl_main(void) {
         gfx_con_setpos(0, 0);
         print_header();
     }
+    }
     
     // Show information
     set_color(COLOR_CYAN);
@@ -645,7 +649,7 @@ void ipl_main(void) {
     int result = perform_installation(pack_variant, mode);
     
     // Wait 3 seconds before clearing screen to allow errors to be visible
-    msleep(3000);
+    msleep(1500);
     // take_screenshot(); // Take a screenshot of the installation summary
 
     // Clear screen for final summary to ensure it's visible
@@ -653,25 +657,20 @@ void ipl_main(void) {
     gfx_con_setpos(0, 0);
     
     // Summary
-    set_color(COLOR_CYAN);
-    gfx_printf("========================================\n");
-    gfx_printf("  OmniNX Installer Payload v%s\n", VERSION);
-    gfx_printf("========================================\n\n");
-    set_color(COLOR_WHITE);
-    
+    const char *op_name = (mode == INSTALL_MODE_UPDATE) ? "     Update" : "  Installation";
     if (result == FR_OK && total_errors == 0) {
         set_color(COLOR_GREEN);
-        gfx_printf("========================================\n");
-        gfx_printf("    Installation abgeschlossen!\n");
-        gfx_printf("========================================\n");
+        gfx_printf("=======================================\n");
+        gfx_printf("    %s abgeschlossen!\n", op_name);
+        gfx_printf("=======================================\n");
     } else {
         set_color(COLOR_RED);
-        gfx_printf("========================================\n");
-        gfx_printf("    Installation beendet\n");
+        gfx_printf("=======================================\n");
+        gfx_printf("    %s beendet\n", op_name);
         if (total_errors > 0) {
             gfx_printf("    %d Fehler\n", total_errors);
         }
-        gfx_printf("========================================\n");
+        gfx_printf("=======================================\n");
     }
     set_color(COLOR_WHITE);
     
@@ -715,16 +714,16 @@ void ipl_main(void) {
     
     gfx_printf("\n");
     set_color(COLOR_CYAN);
-    gfx_printf("Payload wird gestartet...\n");
+    gfx_printf("Hekate wird gestartet...\n");
     set_color(COLOR_WHITE);
     msleep(500); // Brief delay before launch
     
     if (file_exists(PAYLOAD_PATH)) {
         launch_payload(PAYLOAD_PATH);
     } else {
-        // Payload not found, show error
+        // Hekate (update.bin) not found, show error
         set_color(COLOR_RED);
-        gfx_printf("\nFEHLER: Payload nicht gefunden!\n");
+        gfx_printf("\nFEHLER: Hekate nicht gefunden!\n");
         gfx_printf("Pfad: %s\n", PAYLOAD_PATH);
         set_color(COLOR_WHITE);
         gfx_printf("\nDruecke A oder Power zum Neustart...\n");