2.3.0

Source/Atmosphere/stratosphere/loader/source/oc/customize.hpp

@@ -20,8 +20,8 @@
 
 #pragma once
 
-#define CUST_REV 2
-#define KIP_VERSION 220
+#define CUST_REV 3
+#define KIP_VERSION 230
 
 #include "oc_common.hpp"
 #include "pcv/pcv_common.hpp"
@@ -92,7 +92,7 @@ struct CustomizeTable {
     StepMode stepMode;
     u32 marikoEmcMaxClock;
     u32 marikoEmcVddqVolt;
-    u32 emcDvbShift;
+    s32 emcDvbShift;
     u32 marikoSocVmax;
     // advanced config
     u32 t1_tRCD;

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv.cpp

@@ -153,7 +153,7 @@ namespace ams::ldr::hoc::pcv {
             { C.commonEmcMemVolt,                    912'500, 1350'000, false, panic::Emc }, // Official burst vmax for the RAMs is 1500mV
             { GET_MAX_OF_ARR(erista::maxEmcClocks), 1600'000, 2600'000, false, panic::Emc },
             { C.marikoEmcMaxClock,                  1600'000, 3500'000, false, panic::Emc },
-            { C.marikoEmcVddqVolt,                   250'000,  700'000, false, panic::Emc },
+            { C.marikoEmcVddqVolt,                   400'000,  750'000, false, panic::Emc },
             { C.marikoSocVmax,                          1000,     1200, false, panic::Emc },
             { eristaGpuDvfsMaxFreq,                  768'000, 1152'000, false, panic::Gpu },
             { marikoGpuDvfsMaxFreq,                  768'000, 1536'000, false, panic::Gpu },

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv_erista.cpp

@@ -357,7 +357,7 @@ namespace ams::ldr::hoc::pcv::erista {
         table->dram_timings.t_rp = tRFCpb;
         table->dram_timings.t_rfc = tRFCab;
         table->emc_cfg_2 = 0x11083D;
-        table->min_volt = std::min(static_cast<u32>(1050), 900 + C.emcDvbShift * 25);
+        table->min_volt = (u32)std::min(static_cast<s32>(1050), 900 + C.emcDvbShift * 25);
     }
 
     /* Probably more intuitive to point to 40800 rather than 1600000, but oh well. */

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv_mariko.cpp

@@ -809,9 +809,9 @@ namespace ams::ldr::hoc::pcv::mariko {
 
         auto DvbVolt = [&](u32 zero, u32 one, u32 two) {
             return std::array<u32, 3>{
-                std::min(zero + voltAdd, max0),
-                std::min(one  + voltAdd, max1),
-                std::min(two  + voltAdd, max2)
+                std::min((u32)((s32)zero + voltAdd), max0),
+                std::min((u32)((s32)one  + voltAdd), max1),
+                std::min((u32)((s32)two  + voltAdd), max2)
             };
         };
 
@@ -820,16 +820,16 @@ namespace ams::ldr::hoc::pcv::mariko {
             static_cast<u32>((v)[1]), \
             static_cast<u32>((v)[2])
         DvbEntry emcDvbTableNew[] = {
-            {     204000, {             637, 637, 637,  } },
-            {    1331200, {             650, 637, 637,  } },
-            {    1600000, {             675, 650, 637,  } },
-            {    1866000, { DVB(DvbVolt(700, 675, 650)) } },
-            {    2133000, { DVB(DvbVolt(725, 700, 675)) } },
-            {    2400000, { DVB(DvbVolt(750, 725, 700)) } },
-            {    2666000, { DVB(DvbVolt(775, 750, 725)) } },
-            {    2933000, { DVB(DvbVolt(800, 775, 750)) } },
-            {    3200000, { DVB(DvbVolt(800, 800, 775)) } },
-            { 0xFFFFFFFF, {                             } },
+            {     204000, {              637,  637,  637,  }, },
+            {    1331200, {              650,  637,  637,  }, },
+            {    1600000, {              675,  650,  637,  }, },
+            {    1866000, { DVB(DvbVolt( 700,  675,  650)) }, },
+            {    2133000, { DVB(DvbVolt( 725,  700,  675)) }, },
+            {    2400000, { DVB(DvbVolt( 750,  725,  700)) }, },
+            {    2666000, { DVB(DvbVolt( 850,  825,  800)) }, },
+            {    2933000, { DVB(DvbVolt( 950,  925,  900)) }, },
+            {    3200000, { DVB(DvbVolt(1050, 1025, 1000)) }, },
+            { 0xFFFFFFFF, {                                }, },
         };
         #undef DVB
 

Source/hoc-clk/overlay/Makefile

@@ -39,7 +39,7 @@ include ${TOPDIR}/lib/libultrahand/ultrahand.mk
 # version control constants
 #---------------------------------------------------------------------------------
 #TARGET_VERSION	:= $(shell git describe --dirty --always --tags)
-APP_VERSION		:= 2.2.0 # ensure to set KIP_VERSION and CUST_REV in sysmodule Makefile when updating this
+APP_VERSION		:= 2.3.0 # ensure to set KIP_VERSION and CUST_REV in sysmodule Makefile when updating this
 TARGET_VERSION := $(APP_VERSION)
 
 #---------------------------------------------------------------------------------

Source/hoc-clk/overlay/src/ui/gui/misc_gui.cpp

@@ -933,7 +933,10 @@ protected:
 
         this->listElement->addItem(new tsl::elm::CategoryHeader("RAM Settings"));
         
-        addConfigTrackbar(KipConfigValue_emcDvbShift,  "SoC DVB Shift",  ValueRange(0, 16, 1)); // yes, DVB 16 is nessesary
+        addMappedConfigTrackbar(KipConfigValue_emcDvbShift, "DVB Shift",
+            {0xFFFFFFFCu, 0xFFFFFFFDu, 0xFFFFFFFEu, 0xFFFFFFFFu, 0u, 1u, 2u, 3u, 4u, 5u, 6u, 7u, 8u},
+            {"-4", "-3", "-2", "-1", " 0", "1", "2", "3", "4", "5", "6", "7", "8"});
+
         if(IsMariko()) {
             u32 socSpeedo = this->context->speedos[HocClkSpeedo_SOC];
             std::string autoText = "1000 mV";

Source/hoc-clk/sysmodule/Makefile

@@ -28,9 +28,9 @@ INCLUDES	:=	../common/include src/hos src/soc src/i2c src/util src/pwr src/ipc
 EXEFS_SRC	:=	exefs_src
 LIBNAMES	:=	minIni
 # major minor patch
-TARGET_VERSION	:= 2.2.0
-KIP_VERSION :=  220
-CUST_REV    :=  2
+TARGET_VERSION	:= 2.3.0
+KIP_VERSION :=  230
+CUST_REV    :=  3
 
 #---------------------------------------------------------------------------------
 # options for code generation

Source/hoc-clk/sysmodule/perms.json

@@ -3,7 +3,7 @@
 	"title_id": "0x00FF0000636C6BFF",
 	"title_id_range_min": "0x00FF0000636C6BFF",
 	"title_id_range_max": "0x00FF0000636C6BFF",
-	"main_thread_stack_size": "0x0000B000",
+	"main_thread_stack_size": "0x0000C000",
 	"main_thread_priority": 16,
 	"default_cpu_id": 3,
 	"process_category": 1,

Source/hoc-clk/sysmodule/src/file/kip.cpp

@@ -76,7 +76,7 @@ namespace kip {
         CUST_WRITE_FIELD_BATCH(&table, eristaEmcMaxClock2, config::GetConfigValue(KipConfigValue_eristaEmcMaxClock2));
         CUST_WRITE_FIELD_BATCH(&table, marikoEmcMaxClock, config::GetConfigValue(KipConfigValue_marikoEmcMaxClock));
         CUST_WRITE_FIELD_BATCH(&table, marikoEmcVddqVolt, config::GetConfigValue(KipConfigValue_marikoEmcVddqVolt));
-        CUST_WRITE_FIELD_BATCH(&table, emcDvbShift, config::GetConfigValue(KipConfigValue_emcDvbShift));
+        CUST_WRITE_FIELD_BATCH(&table, emcDvbShift, config::GetConfigValue(KipConfigValue_emcDvbShift) > 8 && config::GetConfigValue(KipConfigValue_emcDvbShift) <= 16 ? 8 : config::GetConfigValue(KipConfigValue_emcDvbShift)); // 2.2.0 -> 2.3.0 compat
         CUST_WRITE_FIELD_BATCH(&table, marikoSocVmax, config::GetConfigValue(KipConfigValue_marikoSocVmax));
 
         CUST_WRITE_FIELD_BATCH(&table, t1_tRCD, config::GetConfigValue(KipConfigValue_t1_tRCD));
@@ -233,7 +233,7 @@ namespace kip {
         configValues.values[KipConfigValue_eristaEmcMaxClock2] = cust_get_erista_emc_max2(&table);
         configValues.values[KipConfigValue_marikoEmcMaxClock] = cust_get_mariko_emc_max(&table);
         configValues.values[KipConfigValue_marikoEmcVddqVolt] = cust_get_mariko_emc_vddq(&table);
-        configValues.values[KipConfigValue_emcDvbShift] = cust_get_emc_dvb_shift(&table);
+        configValues.values[KipConfigValue_emcDvbShift] = cust_get_emc_dvb_shift(&table) > 8 && cust_get_emc_dvb_shift(&table) <= 16 ? 8 : cust_get_emc_dvb_shift(&table); // 2.2.0 -> 2.3.0 compat
         configValues.values[KipConfigValue_marikoSocVmax] = cust_get_marikoSocVmax(&table);
 
         configValues.values[KipConfigValue_t1_tRCD] = cust_get_tRCD(&table);
@@ -313,4 +313,5 @@ namespace kip {
             notification::writeNotification("Horizon OC\nConfig Buffer Mismatch");
         }
     }
-}
+}
+

Source/hoc-clk/sysmodule/src/main.cpp

@@ -38,7 +38,7 @@
 #include "ipc/ipc_service.hpp"
 #include "file/config.hpp"
 
-#define INNER_HEAP_SIZE 0x3A000
+#define INNER_HEAP_SIZE 0x40000
 
 extern "C"
 {

Source/hoc-clk/sysmodule/src/mgr/clock_manager.cpp

@@ -252,7 +252,6 @@ namespace clockManager {
             return;
         }
     }
-
     void HandleMiscFeatures()
     {
         // these dont need to run that often, so dont bother
@@ -381,7 +380,6 @@ namespace clockManager {
             board::SetHz(HocClkModule_CPU, board::GetHz(HocClkModule_CPU));
             prepareBoostExit = false;
         }
-
         bool returnRaw = false; // Return a value scaled to MHz instead of raw value
         for (unsigned int module = 0; module < HocClkModule_EnumMax; module++) {
             u32 oldHz = board::GetHz((HocClkModule)module); // Get Old hz (used primarily for DVFS Logic)
@@ -715,8 +713,9 @@ namespace clockManager {
 
         HandleSafetyFeatures();
         HandleMiscFeatures();
-
-        if (RefreshContext() || config::Refresh()) {
+        
+        // GPU clock should always be the same unless PCV has overwriten our change, so reset it
+        if (RefreshContext() || config::Refresh() || board::GetRealHz(HocClkModule_GPU) != gContext.freqs[HocClkModule_GPU]) {
             SetClocks(isBoost);
         }
     }

Source/scripts/convert_dvb.cpp

@@ -0,0 +1,98 @@
+#include <cstdio>
+#include <cstdint>
+#include <iterator>
+
+typedef uint32_t u32;
+typedef int32_t s32;
+
+struct DvbEntry {
+    u32 freq;
+    u32 volts[3];
+};
+
+DvbEntry oldDvbTable[] = {
+    {  204000, { 637, 637, 637, }, },
+    { 1331200, { 650, 637, 637, }, },
+    { 1600000, { 675, 650, 637, }, },
+    { 1866000, { 700, 675, 650, }, },
+    { 2133000, { 725, 700, 675, }, },
+    { 2400000, { 750, 725, 700, }, },
+    { 2666000, { 775, 750, 725, }, },
+    { 2933000, { 800, 775, 750, }, },
+    { 3200000, { 800, 800, 775, }, },
+    {     ~0u, {                }, },
+};
+
+DvbEntry newDvbTable[] = {
+    {  204000, {  637,  637,  637, }, },
+    { 1331200, {  650,  637,  637, }, },
+    { 1600000, {  675,  650,  637, }, },
+    { 1866000, {  700,  675,  650, }, },
+    { 2133000, {  725,  700,  675, }, },
+    { 2400000, {  750,  725,  700, }, },
+    { 2666000, {  850,  825,  800, }, },
+    { 2933000, {  950,  925,  900, }, },
+    { 3200000, { 1050, 1025, 1000, }, },
+    {     ~0u, {                   }, },
+};
+
+constexpr u32 DvbTableSize = std::size(oldDvbTable);
+
+u32 PrintAndScan(const char *message) {
+    u32 scanV;
+    printf("%s: ", message);
+    scanf("%i", &scanV);
+    return scanV;
+}
+
+u32 GetProcessId(u32 speedo) {
+    if (speedo <= 1597) {
+        return 0;
+    }
+
+    if (speedo <= 1708) {
+        return 1;
+    }
+
+    /* >= 1709. */
+    return 2;
+}
+
+u32 GetVoltageAndIndex(u32 dvbShift, u32 emc, u32 processId, DvbEntry *dvbTable, u32 &index) {
+    for (u32 i = 0; i < DvbTableSize - 1; ++i) {
+        if (emc < dvbTable[i].freq || emc >= dvbTable[i + 1].freq) {
+            continue;
+        }
+
+        index = i;
+        return dvbTable[i].volts[processId] + (25 * dvbShift);
+    }
+
+    return 0;
+}
+
+s32 GetShift(u32 oldVoltage, u32 processId, DvbEntry *dvbTable, u32 index) {
+    return (static_cast<s32>(oldVoltage) - static_cast<s32>(dvbTable[index].volts[processId])) / 25;
+}
+
+int main() {
+    u32 oldDvb    = PrintAndScan("Enter old dvb shift");
+    u32 emcMaxMhz = PrintAndScan("Enter max ram freq (MHz)");
+    u32 speedo    = PrintAndScan("Enter soc speedo");
+
+    u32 emcMaxKhz = emcMaxMhz * 1000;
+    u32 processId = GetProcessId(speedo);
+
+    #define INVALID_TABLE_INDEX 32
+    u32 tableIndex = INVALID_TABLE_INDEX;
+    u32 oldVoltage = GetVoltageAndIndex(oldDvb, emcMaxKhz, processId, oldDvbTable, tableIndex);
+
+    if (oldVoltage == 0 || tableIndex == INVALID_TABLE_INDEX) {
+        printf("Invalid values!\n");
+        return -1;
+    }
+
+    s32 newShift = GetShift(oldVoltage, processId, newDvbTable, tableIndex);
+
+    printf("New dvb table shift: %d", newShift);
+}

Source/scripts/convert_dvb.py

@@ -0,0 +1,120 @@
+from dataclasses import dataclass
+from typing import List
+
+
+u32 = int
+s32 = int
+
+
+@dataclass
+class DvbEntry:
+    freq: u32
+    volts: List[u32]
+
+
+oldDvbTable = [
+    DvbEntry(204000,  [637, 637, 637]),
+    DvbEntry(1331200, [650, 637, 637]),
+    DvbEntry(1600000, [675, 650, 637]),
+    DvbEntry(1866000, [700, 675, 650]),
+    DvbEntry(2133000, [725, 700, 675]),
+    DvbEntry(2400000, [750, 725, 700]),
+    DvbEntry(2666000, [775, 750, 725]),
+    DvbEntry(2933000, [800, 775, 750]),
+    DvbEntry(3200000, [800, 800, 775]),
+    DvbEntry(0xFFFFFFFF,      []),
+]
+
+newDvbTable = [
+    DvbEntry(204000,  [637, 637, 637]),
+    DvbEntry(1331200, [650, 637, 637]),
+    DvbEntry(1600000, [675, 650, 637]),
+    DvbEntry(1866000, [700, 675, 650]),
+    DvbEntry(2133000, [725, 700, 675]),
+    DvbEntry(2400000, [750, 725, 700]),
+    DvbEntry(2666000, [850, 825, 800]),
+    DvbEntry(2933000, [950, 925, 900]),
+    DvbEntry(3200000, [1050, 1025, 1000]),
+    DvbEntry(0xFFFFFFFF,      []),
+]
+
+DVB_TABLE_SIZE = len(oldDvbTable)
+INVALID_TABLE_INDEX = 32
+
+
+def print_and_scan(message: str) -> u32:
+    return int(input(f"{message}: "))
+
+
+def get_process_id(speedo: u32) -> u32:
+    if speedo <= 1597:
+        return 0
+
+    if speedo <= 1708:
+        return 1
+
+    # >= 1709
+    return 2
+
+
+def get_voltage_and_index(
+    dvb_shift: u32,
+    emc: u32,
+    process_id: u32,
+    dvb_table: List[DvbEntry],
+):
+    for i in range(DVB_TABLE_SIZE - 1):
+        if emc < dvb_table[i].freq or emc >= dvb_table[i + 1].freq:
+            continue
+
+        voltage = dvb_table[i].volts[process_id] + (25 * dvb_shift)
+        return voltage, i
+
+    return 0, INVALID_TABLE_INDEX
+
+
+def get_shift(
+    old_voltage: u32,
+    process_id: u32,
+    dvb_table: List[DvbEntry],
+    index: u32,
+) -> s32:
+    return (
+        int(old_voltage)
+        - int(dvb_table[index].volts[process_id])
+    ) // 25
+
+
+def main():
+    old_dvb = print_and_scan("Enter old dvb shift")
+    emc_max_mhz = print_and_scan("Enter max ram freq (MHz)")
+    speedo = print_and_scan("Enter soc speedo")
+
+    emc_max_khz = emc_max_mhz * 1000
+    process_id = get_process_id(speedo)
+
+    table_index = INVALID_TABLE_INDEX
+
+    old_voltage, table_index = get_voltage_and_index(
+        old_dvb,
+        emc_max_khz,
+        process_id,
+        oldDvbTable,
+    )
+
+    if old_voltage == 0 or table_index == INVALID_TABLE_INDEX:
+        print("Invalid values!")
+        return -1
+
+    new_shift = get_shift(
+        old_voltage,
+        process_id,
+        newDvbTable,
+        table_index,
+    )
+
+    print(f"New dvb table shift: {new_shift}")
+
+
+if __name__ == "__main__":
+    main()

dist/config/horizon-oc/lang/es.json

@@ -2,140 +2,140 @@
     "Information": "Información",
     "IDDQ:": "IDDQ:",
     "Module: ": "Módulo:",
-    "sys-dock status:": "Estado de sys-dock:",
+    "sys-dock status:": "estado del sys-dock:",
     "SaltyNX status:": "Estado de SaltyNX:",
-    "RR Display status:": "Estado de pantalla RR:",
-    "Wafer Position:": "Posición del wafer:",
+    "RR Display status:": "Estado de visualización RR:",
+    "Wafer Position:": "Posición de la oblea:",
     "Credits": "Créditos",
     "Developers": "Desarrolladores",
     "Contributors": "Colaboradores",
-    "Testers": "Testers",
-    "Special Thanks": "Agradecimientos especiales",
+    "Testers": "Probadores",
+    "Special Thanks": "agradecimiento especial",
     "Unknown": "Desconocido",
     "Installed": "Instalado",
     "Not Installed": "No instalado",
     "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "LICENCIA BEER-WARE",
+    "THE BEER-WARE LICENSE": "LA LICENCIA DE CERVEZA",
     "Default": "Predeterminado",
-    "Do Not Override": "No sobrescribir",
-    "Disabled": "Desactivado",
-    "Enabled": "Activado",
+    "Do Not Override": "No anular",
+    "Disabled": "Discapacitado",
+    "Enabled": "Habilitado",
     " \\ue0e3 Reset": "\\ue0e3 Restablecer",
     "Display": "Pantalla",
-    "Application changed\\n\\n": "Aplicación cambiada\\n\\n",
-    "The running application changed\\n\\n": "La aplicación en ejecución ha cambiado\\n\\n",
-    "while editing was going on.": "mientras se estaba editando.",
-    "Board": "Placa",
+    "Application changed\\n\\n": "Aplicación modificada\\n\\n",
+    "The running application changed\\n\\n": "La aplicación en ejecución cambió\\n\\n",
+    "while editing was going on.": "mientras se realizaba la edición.",
+    "Board": "tablero",
     "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Asegúrate de que todo esté\\n\\n",
-    "correctly installed and enabled.": "correctamente instalado y activado.",
-    "Fatal error": "Error fatal",
-    "Temporary Overrides ": "Ajustes temporales",
-    "Sleep Mode": "Modo reposo",
-    "Stock": "Valores de fábrica",
-    "Dev OC": "OC de desarrollo",
-    "Boost Mode": "Modo boost",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al módulo del sistema hoc-clk.\\n\\n",
+    "Please make sure everything is\\n\\n": "Por favor asegúrese de que todo esté\\n\\n",
+    "correctly installed and enabled.": "correctamente instalado y habilitado.",
+    "Fatal error": "error fatal",
+    "Temporary Overrides ": "Anulaciones temporales",
+    "Sleep Mode": "Modo de suspensión",
+    "Stock": "Valores",
+    "Dev OC": "Desarrollador OC",
+    "Boost Mode": "Modo de impulso",
     "Safe Max": "Máximo seguro",
-    "Unsafe Max": "Máximo no seguro",
+    "Unsafe Max": "Máximo inseguro",
     "Absolute Max": "Máximo absoluto",
-    "Handheld Safe Max": "Máximo seguro en portátil",
-    "Enable": "Activar",
+    "Handheld Safe Max": "Caja fuerte de mano máx.",
+    "Enable": "Habilitar",
     "Edit App Profile": "Editar perfil de aplicación",
     "Edit Global Profile": "Editar perfil global",
-    "Temporary Overrides": "Ajustes temporales",
+    "Temporary Overrides": "Anulaciones temporales",
     "Settings": "Configuración",
     "About": "Acerca de",
-    "Compiling with minimal features": "Compilado con funciones mínimas",
-    "General Settings": "Configuración general",
-    "Governor Settings": "Configuración del governor",
-    "Safety Settings": "Configuración de seguridad",
-    "Save KIP Settings": "Guardar configuración KIP",
+    "Compiling with minimal features": "Compilando con características mínimas",
+    "General Settings": "Configuraciones generales",
+    "Governor Settings": "Configuración del gobernador",
+    "Safety Settings": "Configuraciones de seguridad",
+    "Save KIP Settings": "Guardar configuración de KIP",
     "RAM Settings": "Configuración de RAM",
-    "CPU Settings": "Configuración de CPU",
+    "CPU Settings": "Configuración de la CPU",
     "GPU Settings": "Configuración de GPU",
     "Display Settings": "Configuración de pantalla",
     "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "Método de sobrescritura del scheduling de GPU",
-    "can be dangerous and may cause": "puede ser peligroso y causar",
-    "damage to your battery or charger!": "daños a la batería o al cargador.",
-    "Charge Current Override": "Sobrescritura de corriente de carga",
+    "GPU Scheduling Override Method": "Método de anulación de programación de GPU",
+    "can be dangerous and may cause": "puede ser peligroso y puede causar",
+    "damage to your battery or charger!": "¡Daños a su batería o cargador!",
+    "Charge Current Override": "Anulación de corriente de carga",
     "RAM Voltage Display Mode": "Modo de visualización de voltaje de RAM",
     "Polling Interval": "Intervalo de sondeo",
-    "CPU Governor Minimum Frequency": "Frecuencia mínima del governor de CPU",
-    "refresh rates may cause stress": "las tasas de refresco pueden causar estrés",
-    "or damage to your display! ": "o dañar la pantalla.",
-    "Proceed at your own risk!": "¡Úsalo bajo tu propio riesgo!",
-    "Max Handheld Display": "Frecuencia máxima de pantalla en portátil",
-    "Display Clock": "Frecuencia de pantalla",
-    "Official Rating": "Valor oficial",
+    "CPU Governor Minimum Frequency": "Frecuencia mínima del gobernador de CPU",
+    "refresh rates may cause stress": "Las frecuencias de actualización pueden causar estrés.",
+    "or damage to your display! ": "o daños a su pantalla!",
+    "Proceed at your own risk!": "¡Continúe bajo su propio riesgo!",
+    "Max Handheld Display": "Pantalla portátil máxima",
+    "Display Clock": "Reloj de pantalla",
+    "Official Rating": "Calificación oficial",
     "TDP Threshold": "Umbral de TDP",
-    "Power": "Potencia",
-    "Thermal Throttle Limit": "Límite de thermal throttling",
-    "HP Mode": "Modo alto rendimiento",
+    "Power": "poder",
+    "Thermal Throttle Limit": "Límite del acelerador térmico",
+    "HP Mode": "Modo HP",
     "Default (Mariko)": "Predeterminado (Mariko)",
     "Default (Erista)": "Predeterminado (Erista)",
-    "Rating": "Valor",
-    "Safe Max (Mariko)": "Máximo seguro (Mariko)",
-    "Safe Max (Erista)": "Máximo seguro (Erista)",
-    "RAM VDD2 Voltage": "Voltaje VDD2 de RAM",
-    "Voltage": "Voltaje",
-    "RAM VDDQ Voltage": "Voltaje VDDQ de RAM",
-    "RAM Frequency Editor": "Editor de frecuencia de RAM",
-    "JEDEC.": "JEDEC",
-    "High speedo needed!": "¡Se necesita alto speedo!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (requiere Speedo/PLL extremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (requiere Speedo/PLL extremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (requiere Speedo/PLL extremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (requiere Speedo/PLL muy alto)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (requiere Speedo/PLL muy alto)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (requiere Speedo/PLL muy alto)",
-    "Ram Max Clock": "Frecuencia máxima de RAM",
-    "RAM Latency Editor": "Editor de latencias de RAM",
-    "RAM Timing Reductions": "Reducción de timings de RAM",
-    "Memory Timings": "Timings de memoria",
+    "Rating": "Calificación",
+    "Safe Max (Mariko)": "Max seguro (Mariko)",
+    "Safe Max (Erista)": "Safe Max (Erista)",
+    "RAM VDD2 Voltage": "Voltaje RAM VDD2",
+    "Voltage": "voltaje",
+    "RAM VDDQ Voltage": "Voltaje RAM VDDQ",
+    "RAM Frequency Editor": "Editor de frecuencia RAM",
+    "JEDEC.": "JEDEC.",
+    "High speedo needed!": "¡Se necesita alta velocidad!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Necesita Speedo/PLL extremo)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Necesita Speedo/PLL extremo)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Necesita Speedo/PLL extremo)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Necesita Speedo/PLL ridículo)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Necesita Speedo/PLL ridículo)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Necesita Speedo/PLL ridículo)",
+    "Ram Max Clock": "Ram Max Reloj",
+    "RAM Latency Editor": "Editor de latencia de RAM",
+    "RAM Timing Reductions": "Reducciones de tiempo de RAM",
+    "Memory Timings": "Tiempos de memoria",
     "Advanced": "Avanzado",
-    "t6 tRTW Fine Tune": "Ajuste fino t6 tRTW",
+    "t6 tRTW Fine Tune": "t6 tRTW Ajuste fino",
     "tRTW Fine Tune": "Ajuste fino tRTW",
-    "t7 tWTR Fine Tune": "Ajuste fino t7 tWTR",
-    "tWTR Fine Tune": "Ajuste fino tWTR",
-    "Memory Latencies": "Latencias de memoria",
-    "Read Latency": "Latencia de lectura",
+    "t7 tWTR Fine Tune": "t7 tWTR Ajuste fino",
+    "tWTR Fine Tune": "Ajuste fino de tWTR",
+    "Memory Latencies": "Latencias de la memoria",
+    "Read Latency": "Leer latencia",
     "Write Latency": "Latencia de escritura",
-    "CPU Boost Clock": "Frecuencia boost de CPU",
-    "CPU UV": "Undervolt de CPU",
+    "CPU Boost Clock": "Reloj de aumento de CPU",
+    "CPU UV": "procesador ultravioleta",
     "CPU Unlock": "Desbloqueo de CPU",
-    "CPU VMIN": "VMIN de CPU",
-    "CPU Max Voltage": "Voltaje máximo de CPU",
-    "CPU Max Clock": "Frecuencia máxima de CPU",
-    "Extreme UV Table": "Tabla de undervolt extrema",
-    "CPU UV Table": "Tabla de undervolt de CPU",
-    "CPU Low UV": "Undervolt bajo de CPU",
-    "CPU High UV": "Undervolt alto de CPU",
+    "CPU VMIN": "CPU VMIN",
+    "CPU Max Voltage": "Voltaje máximo de la CPU",
+    "CPU Max Clock": "Reloj máximo de CPU",
+    "Extreme UV Table": "Mesa UV extrema",
+    "CPU UV Table": "Tabla UV de CPU",
+    "CPU Low UV": "CPU baja radiación ultravioleta",
+    "CPU High UV": "CPU alta UV",
     "CPU Low VMIN": "VMIN bajo de CPU",
     "CPU High VMIN": "VMIN alto de CPU",
-    "No Undervolt": "Sin undervolt",
-    "SLT Table": "Tabla SLT",
+    "No Undervolt": "Sin subvoltaje",
+    "SLT Table": "Mesa TR",
     "HiOPT Table": "Tabla HiOPT",
-    "GPU Undervolt Table": "Tabla de undervolt de GPU",
+    "GPU Undervolt Table": "Tabla de subvoltaje de GPU",
     "GPU Minimum Voltage": "Voltaje mínimo de GPU",
-    "Calculate GPU Vmin": "Calcular Vmin de GPU",
-    "GPU VMIN": "VMIN de GPU",
+    "Calculate GPU Vmin": "Calcular GPU Vmin",
+    "GPU VMIN": "GPU VMIN",
     "GPU Maximum Voltage": "Voltaje máximo de GPU",
-    "GPU Voltage Offset": "Offset de voltaje de GPU",
-    "Do not override": "No sobrescribir",
-    "Enabled (Default)": "Activado (predeterminado)",
-    "96.6% limit": "Límite 96,6%",
-    "99.7% limit": "Límite 99,7%",
-    "GPU Scheduling Override": "Sobrescritura de scheduling de GPU",
-    "Official Service": "Servicio oficial",
-    "GPU DVFS Mode": "Modo DVFS de GPU",
-    "GPU DVFS Offset": "Offset DVFS de GPU",
+    "GPU Voltage Offset": "Compensación de voltaje de GPU",
+    "Do not override": "no anular",
+    "Enabled (Default)": "Habilitado (predeterminado)",
+    "96.6% limit": "límite del 96,6%",
+    "99.7% limit": "límite del 99,7%",
+    "GPU Scheduling Override": "Anulación de programación de GPU",
+    "Official Service": "Servicio Oficial",
+    "GPU DVFS Mode": "Modo GPU DVFS",
+    "GPU DVFS Offset": "Compensación DVFS de GPU",
     "GPU Voltage Table": "Tabla de voltaje de GPU",
     "GPU Custom Table (mV)": "Tabla personalizada de GPU (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz sin undervolt, 1152MHz en SLT",
-    "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar ",
-    "permanent damage to your Switch!": "¡daño permanente a tu Switch!",
-    "921MHz without UV and 960MHz on": "921MHz sin undervolt y 960MHz en",
-    "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar "
-}
+    "1075MHz without UV, 1152MHz on SLT": "1075MHz sin UV, 1152MHz en SLT",
+    "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar",
+    "permanent damage to your Switch!": "¡Daño permanente a tu Switch!",
+    "921MHz without UV and 960MHz on": "921MHz sin UV y 960MHz encendido",
+    "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar"
+}

dist/config/horizon-oc/lang/fr.json

@@ -1,11 +1,11 @@
 {
     "Information": "Informations",
-    "IDDQ:": "IDDQ :",
-    "Module: ": "Module :",
-    "sys-dock status:": "Statut de sys-dock :",
-    "SaltyNX status:": "Statut de SaltyNX :",
-    "RR Display status:": "Statut de l'affichage RR :",
-    "Wafer Position:": "Position du wafer :",
+    "IDDQ:": "IDDQ :",
+    "Module: ": "Module :",
+    "sys-dock status:": "état du dock système :",
+    "SaltyNX status:": "Statut SaltyNX :",
+    "RR Display status:": "Etat d'affichage RR :",
+    "Wafer Position:": "Position de la plaquette :",
     "Credits": "Crédits",
     "Developers": "Développeurs",
     "Contributors": "Contributeurs",
@@ -15,127 +15,127 @@
     "Installed": "Installé",
     "Not Installed": "Non installé",
     "X: %u Y: %u": "X : %u Y : %u",
-    "THE BEER-WARE LICENSE": "LA LICENCE BEER-WARE",
+    "THE BEER-WARE LICENSE": "LA LICENCE DE LA BIÈRE",
     "Default": "Par défaut",
     "Do Not Override": "Ne pas remplacer",
     "Disabled": "Désactivé",
     "Enabled": "Activé",
     " \\ue0e3 Reset": "\\ue0e3 Réinitialiser",
-    "Display": "Écran",
+    "Display": "Affichage",
     "Application changed\\n\\n": "Application modifiée\\n\\n",
     "The running application changed\\n\\n": "L'application en cours d'exécution a changé\\n\\n",
-    "while editing was going on.": "pendant la modification.",
-    "Board": "Carte",
+    "while editing was going on.": "pendant le montage.",
+    "Board": "Conseil",
     "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au sysmodule hoc-clk.\\n\\n",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au module système hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Veuillez vous assurer que tout est\\n\\n",
     "correctly installed and enabled.": "correctement installé et activé.",
     "Fatal error": "Erreur fatale",
-    "Temporary Overrides ": "Forçages temporaires ",
+    "Temporary Overrides ": "Remplacements temporaires",
     "Sleep Mode": "Mode veille",
-    "Stock": "D'origine",
-    "Dev OC": "OC Développeur",
+    "Stock": "Actions",
+    "Dev OC": "Développeur OC",
     "Boost Mode": "Mode Boost",
-    "Safe Max": "Max sûr",
-    "Unsafe Max": "Max non sûr",
+    "Safe Max": "Coffre-fort maximum",
+    "Unsafe Max": "Dangereux Max",
     "Absolute Max": "Max absolu",
-    "Handheld Safe Max": "Max sûr (mode portable)",
+    "Handheld Safe Max": "Coffre-fort portatif Max",
     "Enable": "Activer",
-    "Edit App Profile": "Modifier le profil de l'app",
+    "Edit App Profile": "Modifier le profil de l'application",
     "Edit Global Profile": "Modifier le profil global",
-    "Temporary Overrides": "Forçages temporaires",
+    "Temporary Overrides": "Remplacements temporaires",
     "Settings": "Paramètres",
     "About": "À propos",
-    "Compiling with minimal features": "Compilation avec fonctionnalités minimales",
+    "Compiling with minimal features": "Compilation avec des fonctionnalités minimales",
     "General Settings": "Paramètres généraux",
     "Governor Settings": "Paramètres du gouverneur",
     "Safety Settings": "Paramètres de sécurité",
     "Save KIP Settings": "Enregistrer les paramètres KIP",
-    "RAM Settings": "Paramètres RAM",
-    "CPU Settings": "Paramètres CPU",
-    "GPU Settings": "Paramètres GPU",
+    "RAM Settings": "Paramètres de la RAM",
+    "CPU Settings": "Paramètres du processeur",
+    "GPU Settings": "Paramètres du processeur graphique",
     "Display Settings": "Paramètres d'affichage",
     "Experimental": "Expérimental",
-    "GPU Scheduling Override Method": "Méthode de Forçage de l'ordonnancement GPU",
-    "can be dangerous and may cause": "peut être dangereux et causer des",
-    "damage to your battery or charger!": "dommages à votre batterie ou chargeur !",
-    "Charge Current Override": "Forçage du courant de charge",
-    "RAM Voltage Display Mode": "Mode d'affichage de la tension RAM",
+    "GPU Scheduling Override Method": "Méthode de remplacement de la planification GPU",
+    "can be dangerous and may cause": "peut être dangereux et provoquer",
+    "damage to your battery or charger!": "dommages à votre batterie ou à votre chargeur !",
+    "Charge Current Override": "Remplacement du courant de charge",
+    "RAM Voltage Display Mode": "Mode d'affichage de la tension de la RAM",
     "Polling Interval": "Intervalle d'interrogation",
-    "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur CPU",
-    "refresh rates may cause stress": "les taux de rafraîchissement peuvent stresser",
-    "or damage to your display! ": "ou endommager votre écran !",
-    "Proceed at your own risk!": "À utiliser à vos propres risques !",
-    "Max Handheld Display": "Affichage portable max",
-    "Display Clock": "Fréquence d'affichage",
+    "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur du processeur",
+    "refresh rates may cause stress": "les taux de rafraîchissement peuvent causer du stress",
+    "or damage to your display! ": "ou endommager votre écran !",
+    "Proceed at your own risk!": "Procédez à vos propres risques !",
+    "Max Handheld Display": "Affichage portable maximum",
+    "Display Clock": "Affichage de l'horloge",
     "Official Rating": "Classement officiel",
     "TDP Threshold": "Seuil TDP",
-    "Power": "Alimentation",
-    "Thermal Throttle Limit": "Limite d'étranglement thermique",
+    "Power": "Puissance",
+    "Thermal Throttle Limit": "Limite d'accélérateur thermique",
     "HP Mode": "Mode HP",
     "Default (Mariko)": "Par défaut (Mariko)",
     "Default (Erista)": "Par défaut (Erista)",
-    "Rating": "Évaluation",
-    "Safe Max (Mariko)": "Max sûr (Mariko)",
-    "Safe Max (Erista)": "Max sûr (Erista)",
-    "RAM VDD2 Voltage": "Tension RAM VDD2",
+    "Rating": "Note",
+    "Safe Max (Mariko)": "Coffre-fort Max (Mariko)",
+    "Safe Max (Erista)": "Coffre-fort Max (Erista)",
+    "RAM VDD2 Voltage": "Tension de la RAM VDD2",
     "Voltage": "Tension",
-    "RAM VDDQ Voltage": "Tension RAM VDDQ",
+    "RAM VDDQ Voltage": "Tension VDDQ de la RAM",
     "RAM Frequency Editor": "Éditeur de fréquence RAM",
     "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Speedo élevé requis !",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite Speedo/PLL extrême)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite Speedo/PLL extrême)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite Speedo/PLL extrême)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite Speedo/PLL ridicule)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite Speedo/PLL ridicule)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite Speedo/PLL ridicule)",
-    "Ram Max Clock": "Fréquence RAM max",
+    "High speedo needed!": "Besoin d'un speedo haut !",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite un Speedo/PLL extrême)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite un Speedo/PLL extrême)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite un Speedo/PLL extrême)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite un Speedo/PLL ridicule)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite un Speedo/PLL ridicule)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite un Speedo/PLL ridicule)",
+    "Ram Max Clock": "Ram Max Horloge",
     "RAM Latency Editor": "Éditeur de latence RAM",
-    "RAM Timing Reductions": "Réductions des timings RAM",
-    "Memory Timings": "Timings mémoire",
+    "RAM Timing Reductions": "Réductions de synchronisation de la RAM",
+    "Memory Timings": "Horaires de mémoire",
     "Advanced": "Avancé",
-    "t6 tRTW Fine Tune": "Ajustement précis t6 tRTW",
-    "tRTW Fine Tune": "Ajustement précis tRTW",
-    "t7 tWTR Fine Tune": "Ajustement précis t7 tWTR",
-    "tWTR Fine Tune": "Ajustement précis tWTR",
-    "Memory Latencies": "Latences mémoire",
+    "t6 tRTW Fine Tune": "t6 tRTW réglage fin",
+    "tRTW Fine Tune": "tRTW Réglage fin",
+    "t7 tWTR Fine Tune": "t7 tWTR réglage fin",
+    "tWTR Fine Tune": "Réglage fin du tWTR",
+    "Memory Latencies": "Latences de mémoire",
     "Read Latency": "Latence de lecture",
     "Write Latency": "Latence d'écriture",
-    "CPU Boost Clock": "Fréquence Boost CPU",
-    "CPU UV": "UV CPU",
-    "CPU Unlock": "Déverrouillage CPU",
+    "CPU Boost Clock": "Horloge d'augmentation du processeur",
+    "CPU UV": "UV du processeur",
+    "CPU Unlock": "Déverrouillage du processeur",
     "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Tension CPU max",
-    "CPU Max Clock": "Fréquence CPU max",
-    "Extreme UV Table": "Table d'UV extrême",
-    "CPU UV Table": "Table d'UV CPU",
-    "CPU Low UV": "UV CPU faible",
-    "CPU High UV": "UV CPU élevé",
-    "CPU Low VMIN": "VMIN CPU faible",
-    "CPU High VMIN": "VMIN CPU élevé",
-    "No Undervolt": "Aucun Undervolt",
-    "SLT Table": "Table SLT",
-    "HiOPT Table": "Table HiOPT",
-    "GPU Undervolt Table": "Table d'undervolt GPU",
-    "GPU Minimum Voltage": "Tension GPU minimale",
-    "Calculate GPU Vmin": "Calculer Vmin GPU",
+    "CPU Max Voltage": "Tension maximale du processeur",
+    "CPU Max Clock": "Horloge maximale du processeur",
+    "Extreme UV Table": "Table UV Extrême",
+    "CPU UV Table": "Tableau UV du processeur",
+    "CPU Low UV": "CPU faible UV",
+    "CPU High UV": "CPU UV élevé",
+    "CPU Low VMIN": "CPU faible VMIN",
+    "CPU High VMIN": "Processeur VMIN élevé",
+    "No Undervolt": "Pas de sous-tension",
+    "SLT Table": "Tableau SLT",
+    "HiOPT Table": "Tableau HiOPT",
+    "GPU Undervolt Table": "Tableau de sous-tension GPU",
+    "GPU Minimum Voltage": "Tension minimale du GPU",
+    "Calculate GPU Vmin": "Calculer la Vmin du GPU",
     "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Tension GPU maximale",
-    "GPU Voltage Offset": "Offset de tension GPU",
-    "Do not override": "Ne pas remplacer",
+    "GPU Maximum Voltage": "Tension maximale du GPU",
+    "GPU Voltage Offset": "Décalage de tension du GPU",
+    "Do not override": "Ne remplacez pas",
     "Enabled (Default)": "Activé (par défaut)",
-    "96.6% limit": "Limite de 96,6 %",
-    "99.7% limit": "Limite de 99,7 %",
-    "GPU Scheduling Override": "Forçage de l'ordonnancement GPU",
+    "96.6% limit": "Limite de 96,6 %",
+    "99.7% limit": "Limite de 99,7 %",
+    "GPU Scheduling Override": "Remplacement de la planification GPU",
     "Official Service": "Service officiel",
     "GPU DVFS Mode": "Mode GPU DVFS",
-    "GPU DVFS Offset": "Offset GPU DVFS",
-    "GPU Voltage Table": "Table de tension GPU",
-    "GPU Custom Table (mV)": "Table de GPU personnalisée (mV)",
+    "GPU DVFS Offset": "Décalage GPU DVFS",
+    "GPU Voltage Table": "Tableau de tension du GPU",
+    "GPU Custom Table (mV)": "Tableau personnalisé GPU (mV)",
     "1075MHz without UV, 1152MHz on SLT": "1075 MHz sans UV, 1152 MHz sur SLT",
-    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut causer des",
-    "permanent damage to your Switch!": "dommages permanents à votre Switch !",
-    "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz sur",
-    "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent causer des"
+    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut provoquer",
+    "permanent damage to your Switch!": "dommages permanents à votre Switch !",
+    "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz activé",
+    "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent provoquer"
 }

dist/config/horizon-oc/lang/it.json

@@ -2,140 +2,140 @@
     "Information": "Informazioni",
     "IDDQ:": "IDDQ:",
     "Module: ": "Modulo:",
-    "sys-dock status:": "stato di sys-dock",
+    "sys-dock status:": "stato del dock di sistema:",
     "SaltyNX status:": "Stato di SaltyNX:",
-    "RR Display status:": "Stato del RR:",
-    "Wafer Position:": "Posizione nel Wafer:",
+    "RR Display status:": "Stato di visualizzazione RR:",
+    "Wafer Position:": "Posizione del wafer:",
     "Credits": "Crediti",
     "Developers": "Sviluppatori",
     "Contributors": "Collaboratori",
     "Testers": "Tester",
-    "Special Thanks": "Un Ringraziamento Speciale",
+    "Special Thanks": "Un ringraziamento speciale",
     "Unknown": "Sconosciuto",
     "Installed": "Installato",
     "Not Installed": "Non installato",
     "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE",
+    "THE BEER-WARE LICENSE": "LA LICENZA PER GLI ARTICOLI DI BIRRA",
     "Default": "Predefinito",
-    "Do Not Override": "Non Sovrascrivere",
+    "Do Not Override": "Non sovrascrivere",
     "Disabled": "Disabilitato",
     "Enabled": "Abilitato",
     " \\ue0e3 Reset": "\\ue0e3 Ripristina",
-    "Display": "Schermo",
+    "Display": "Visualizzazione",
     "Application changed\\n\\n": "Applicazione modificata\\n\\n",
     "The running application changed\\n\\n": "L'applicazione in esecuzione è cambiata\\n\\n",
     "while editing was going on.": "mentre era in corso la modifica.",
-    "Board": "Scheda",
+    "Board": "Consiglio",
     "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al sysmodule hoc-clk.\\n\\n",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al modulo di sistema hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n",
     "correctly installed and enabled.": "correttamente installato e abilitato.",
     "Fatal error": "Errore fatale",
-    "Temporary Overrides ": "Sostituzioni Temporanee",
-    "Sleep Mode": "Modalità di Sospensione",
-    "Stock": "Originale",
-    "Dev OC": "OC dev",
-    "Boost Mode": "Modalità Boost",
-    "Safe Max": "Massimo Sicuro",
-    "Unsafe Max": "Massimo Non Sicuro",
-    "Absolute Max": "Massimo Assoluto",
-    "Handheld Safe Max": "Massimo Sicuro Modalità Portatile",
+    "Temporary Overrides ": "Sostituzioni temporanee",
+    "Sleep Mode": "Modalità di sospensione",
+    "Stock": "Magazzino",
+    "Dev OC": "OC di sviluppo",
+    "Boost Mode": "Modalità potenziamento",
+    "Safe Max": "Sicuro massimo",
+    "Unsafe Max": "Non sicuro Max",
+    "Absolute Max": "Massimo assoluto",
+    "Handheld Safe Max": "Cassaforte portatile max",
     "Enable": "Abilita",
-    "Edit App Profile": "Modifica Profilo Dell'App",
-    "Edit Global Profile": "Modifica Profilo Globale",
-    "Temporary Overrides": "Sostituzioni Temporanee",
+    "Edit App Profile": "Modifica profilo dell'app",
+    "Edit Global Profile": "Modifica profilo globale",
+    "Temporary Overrides": "Sostituzioni temporanee",
     "Settings": "Impostazioni",
-    "About": "A Riguardo Di",
+    "About": "Circa",
     "Compiling with minimal features": "Compilazione con funzionalità minime",
-    "General Settings": "Impostazioni Generali",
-    "Governor Settings": "Impostazioni Del Governor",
-    "Safety Settings": "Impostazioni Di Sicurezza",
-    "Save KIP Settings": "Salva le impostazioni del KIP",
+    "General Settings": "Impostazioni generali",
+    "Governor Settings": "Impostazioni del governatore",
+    "Safety Settings": "Impostazioni di sicurezza",
+    "Save KIP Settings": "Salva le impostazioni KIP",
     "RAM Settings": "Impostazioni della RAM",
     "CPU Settings": "Impostazioni della CPU",
     "GPU Settings": "Impostazioni della GPU",
-    "Display Settings": "Impostazioni dello Schermo",
+    "Display Settings": "Impostazioni di visualizzazione",
     "Experimental": "Sperimentale",
-    "GPU Scheduling Override Method": "Metodo di override dello scheduling GPU",
+    "GPU Scheduling Override Method": "Metodo di override della pianificazione GPU",
     "can be dangerous and may cause": "può essere pericoloso e può causare",
     "damage to your battery or charger!": "danni alla batteria o al caricabatterie!",
-    "Charge Current Override": "Override della Corrente di Carica",
-    "RAM Voltage Display Mode": "Modalità di Visualizzazione della Tensione RAM",
+    "Charge Current Override": "Override della corrente di carica",
+    "RAM Voltage Display Mode": "Modalità di visualizzazione della tensione RAM",
     "Polling Interval": "Intervallo di polling",
-    "CPU Governor Minimum Frequency": "Frequenza minima del Governor della CPU",
+    "CPU Governor Minimum Frequency": "Frequenza minima del governatore della CPU",
     "refresh rates may cause stress": "le frequenze di aggiornamento possono causare stress",
     "or damage to your display! ": "o danni al display!",
     "Proceed at your own risk!": "Procedi a tuo rischio e pericolo!",
-    "Max Handheld Display": "Display Massimo in Modalità Portatile",
-    "Display Clock": "Frequenza del Display",
-    "Official Rating": "Rating Ufficiale",
+    "Max Handheld Display": "Display portatile massimo",
+    "Display Clock": "Visualizza orologio",
+    "Official Rating": "Valutazione ufficiale",
     "TDP Threshold": "Soglia TDP",
     "Power": "Potenza",
-    "Thermal Throttle Limit": "Limite Termico",
+    "Thermal Throttle Limit": "Limite della valvola termica",
     "HP Mode": "Modalità HP",
     "Default (Mariko)": "Predefinito (Mariko)",
     "Default (Erista)": "Predefinito (Erista)",
     "Rating": "Valutazione",
-    "Safe Max (Mariko)": "Massimo Sicuro (Mariko)",
-    "Safe Max (Erista)": "Massimo Sicuro (Erista)",
+    "Safe Max (Mariko)": "Safe Max (Mariko)",
+    "Safe Max (Erista)": "Safe Max (Erista)",
     "RAM VDD2 Voltage": "Tensione RAM VDD2",
     "Voltage": "Voltaggio",
     "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM",
     "RAM Frequency Editor": "Editor della frequenza RAM",
     "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Alto Valore Speedo Necessario!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL altissimo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL altissimo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL altissimo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (richiede Speedo/PLL estremo)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (richiede Speedo/PLL estremo)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (richiede Speedo/PLL estremo)",
-    "Ram Max Clock": "Frequenza Massima Ram",
-    "RAM Latency Editor": "Editor della Latenza RAM",
-    "RAM Timing Reductions": "Riduzioni dei Timing della RAM",
-    "Memory Timings": "Timing di Memoria",
+    "High speedo needed!": "È necessaria l'alta velocità!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL estremo)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL estremo)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL estremo)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (è necessario un ridicolo Speedo/PLL)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (è necessario un ridicolo Speedo/PLL)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (è necessario un ridicolo Speedo/PLL)",
+    "Ram Max Clock": "Orologio Ram Max",
+    "RAM Latency Editor": "Editor della latenza RAM",
+    "RAM Timing Reductions": "Riduzioni della temporizzazione della RAM",
+    "Memory Timings": "Tempi di memoria",
     "Advanced": "Avanzato",
-    "t6 tRTW Fine Tune": "Regolazione Fine t6 tRTW",
-    "tRTW Fine Tune": "Regolazione Fine tRTW",
-    "t7 tWTR Fine Tune": "Regolazione Fine t7 tWTR",
-    "tWTR Fine Tune": "Regolazione Fine tWTR",
-    "Memory Latencies": "Latenza della Memoria",
-    "Read Latency": "Latenza di Lettura",
-    "Write Latency": "Latenza di Scrittura",
-    "CPU Boost Clock": "Frequenza CPU in Boost",
-    "CPU UV": "Undervolt CPU",
+    "t6 tRTW Fine Tune": "t6 tRTW Sintonia fine",
+    "tRTW Fine Tune": "tRTW Sintonia fine",
+    "t7 tWTR Fine Tune": "t7 tWTR Sintonia fine",
+    "tWTR Fine Tune": "tWTR Sintonia fine",
+    "Memory Latencies": "Latenza della memoria",
+    "Read Latency": "Leggi latenza",
+    "Write Latency": "Scrivi latenza",
+    "CPU Boost Clock": "Orologio di potenziamento della CPU",
+    "CPU UV": "UV della CPU",
     "CPU Unlock": "Sblocco della CPU",
-    "CPU VMIN": "CPU VMIN",
+    "CPU VMIN": "CPUVMIN",
     "CPU Max Voltage": "Voltaggio massimo della CPU",
-    "CPU Max Clock": "Frequenza massima della CPU",
-    "Extreme UV Table": "Tabella UV estremo",
+    "CPU Max Clock": "Orologio massimo della CPU",
+    "Extreme UV Table": "Tavolo UV estremo",
     "CPU UV Table": "Tabella UV della CPU",
-    "CPU Low UV": "CPU UV Bassa Frequenza",
-    "CPU High UV": "CPU UV Alta Frequenza",
-    "CPU Low VMIN": "CPU VMIN Bassa Frequenza",
-    "CPU High VMIN": "CPU VMIN Alta Frequenza",
-    "No Undervolt": "Nessun Undervolt",
+    "CPU Low UV": "CPU con raggi UV bassi",
+    "CPU High UV": "UV elevato della CPU",
+    "CPU Low VMIN": "VMIN CPU basso",
+    "CPU High VMIN": "CPU alta VMIN",
+    "No Undervolt": "Nessuna sottotensione",
     "SLT Table": "Tabella SLT",
     "HiOPT Table": "Tabella HiOPT",
-    "GPU Undervolt Table": "Tabella di Undervolt GPU",
-    "GPU Minimum Voltage": "Voltaggio Minimo della GPU",
+    "GPU Undervolt Table": "Tabella di sottotensione GPU",
+    "GPU Minimum Voltage": "Voltaggio minimo della GPU",
     "Calculate GPU Vmin": "Calcola GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
+    "GPU VMIN": "GPUVMIN",
     "GPU Maximum Voltage": "Voltaggio massimo della GPU",
-    "GPU Voltage Offset": "Offset di Voltaggio della GPU",
+    "GPU Voltage Offset": "Offset di tensione della GPU",
     "Do not override": "Non sovrascrivere",
     "Enabled (Default)": "Abilitato (impostazione predefinita)",
     "96.6% limit": "Limite del 96,6%.",
     "99.7% limit": "Limite del 99,7%.",
-    "GPU Scheduling Override": "Override dello Scheduling GPU",
+    "GPU Scheduling Override": "Override della pianificazione GPU",
     "Official Service": "Servizio ufficiale",
     "GPU DVFS Mode": "Modalità DVFS GPU",
     "GPU DVFS Offset": "Offset DVFS della GPU",
-    "GPU Voltage Table": "Tabella delle Tensioni della GPU",
-    "GPU Custom Table (mV)": "Tabella GPU Personalizzata (mV)",
+    "GPU Voltage Table": "Tabella delle tensioni della GPU",
+    "GPU Custom Table (mV)": "Tabella personalizzata GPU (mV)",
     "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT",
     "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare",
-    "permanent damage to your Switch!": "danni permanenti alla tua Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz su",
+    "permanent damage to your Switch!": "danni permanenti al tuo Switch!",
+    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz attivi",
     "SLT or HiOPT can cause ": "SLT o HiOPT possono causare"
 }

dist/config/horizon-oc/lang/ru.json

@@ -1,179 +1,141 @@
 {
     "Information": "Информация",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module:",
-    "sys-dock status:": "Статус sys-dock:",
+    "IDDQ:": "ИДДК:",
+    "Module: ": "Модуль:",
+    "sys-dock status:": "Статус системной док-станции:",
     "SaltyNX status:": "Статус SaltyNX:",
-    "RR Display status:": "Статус RR Display:",
-    "Wafer Position:": "Wafer Position:",
-    "Credits": "Благодарности",
+    "RR Display status:": "Статус отображения RR:",
+    "Wafer Position:": "Позиция вафли:",
+    "Credits": "Кредиты",
     "Developers": "Разработчики",
-    "Contributors": "Внесли вклад",
+    "Contributors": "Авторы",
     "Testers": "Тестеры",
     "Special Thanks": "Особая благодарность",
     "Unknown": "Неизвестно",
     "Installed": "Установлено",
     "Not Installed": "Не установлено",
     "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "BEER-WARE LICENSE",
+    "THE BEER-WARE LICENSE": "ЛИЦЕНЗИЯ НА ПРОДАЖУ ПИВА",
     "Default": "По умолчанию",
-    "Do Not Override": "Не менять",
+    "Do Not Override": "Не переопределять",
     "Disabled": "Отключено",
     "Enabled": "Включено",
-    "Auto": "Авто",
     " \\ue0e3 Reset": "\\ue0e3 Сброс",
     "Display": "Дисплей",
     "Application changed\\n\\n": "Приложение изменено\\n\\n",
     "The running application changed\\n\\n": "Запущенное приложение изменилось\\n\\n",
     "while editing was going on.": "пока шло редактирование.",
-    "Board": "Board",
+    "Board": "Совет",
     "%u.%u%u mV": "%u.%u%u мВ",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к сис-модулю hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все\\n\\n",
-    "correctly installed and enabled.": "правильно установлено и включено.",
-    "Fatal error": "Фатальная ошибка",
-    "Temporary Overrides ": "Временный профиль",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к системному модулю hoc-clk.\\n\\n",
+    "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все в порядке\\n\\n",
+    "correctly installed and enabled.": "правильно установлен и включен.",
+    "Fatal error": "Неустранимая ошибка",
+    "Temporary Overrides ": "Временные переопределения",
     "Sleep Mode": "Спящий режим",
-    "Stock": "Стандарт",
-    "Dev OC": "Разгон dev-кита",
-    "Boost Mode": "Режим буста",
-    "Safe Max": "Безопасный макс.",
-    "Unsafe Max": "Опасный макс.",
-    "Absolute Max": "Абсолютный макс.",
-    "Handheld Safe Max": "Портативный безопасный макс.",
-    "Enable": "Включено",
-    "Edit App Profile": "Профиль приложения",
-    "Edit Global Profile": "Глобальный профиль",
-    "Temporary Overrides": "Временный профиль",
+    "Stock": "Акции",
+    "Dev OC": "Разработчик OC",
+    "Boost Mode": "Режим повышения",
+    "Safe Max": "Сейф Макс",
+    "Unsafe Max": "Небезопасный Макс",
+    "Absolute Max": "Абсолютный Макс",
+    "Handheld Safe Max": "Ручной сейф Макс",
+    "Enable": "Включить",
+    "Edit App Profile": "Редактировать профиль приложения",
+    "Edit Global Profile": "Редактировать глобальный профиль",
+    "Temporary Overrides": "Временные переопределения",
     "Settings": "Настройки",
-    "About": "Сведения",
-    "Compiling with minimal features": "Собрано с урезанием функций",
-    "\uE150 Settings marked in blue": "Настройки помеченные синим",
-    "don't require a reboot to apply!": "Синие настройки применяются сразу!",
-    "General Settings": "Основные настройки",
-    "Governor Settings": "Настройки говернора",
+    "About": "О",
+    "Compiling with minimal features": "Компиляция с минимальными возможностями",
+    "General Settings": "Общие настройки",
+    "Governor Settings": "Настройки губернатора",
     "Safety Settings": "Настройки безопасности",
-    "Save KIP Settings": "Сохранить настройки KIP",
-    "RAM Settings": "Настройки RAM",
-    "CPU Settings": "Настройки CPU",
-    "GPU Settings": "Настройки GPU",
+    "Save KIP Settings": "Сохранить настройки КИП",
+    "RAM Settings": "Настройки ОЗУ",
+    "CPU Settings": "Настройки процессора",
+    "GPU Settings": "Настройки графического процессора",
     "Display Settings": "Настройки дисплея",
     "Experimental": "Экспериментальный",
-    "Enable Experimental Settings": "Экспериментальные настройки",
-    "\uE150 Experimental Settings are incomplete ": "Экспериментальные настройки не закончены",
-    "and may not work correctly or at all!": "Экспериментальные настройки не",
-    "Here be dragons!": "закончены и могут не работать!",
-    "Experimental Settings": "Экспериментальные",
-    "Live CPU Undervolt": "Мгновенный андервольт CPU",
-    "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU",
-    "Memory Frequency Measurement Mode": "Режим измерения частоты RAM",
-    "\uE150 Overriding the charge current": "Перезапись зарядного тока может",
-    "can be dangerous and may cause": "Перезапись зарядного тока может",
-    "damage to your battery or charger!": "повреждить аккумулятор или зарядку!",
-    "Charge Current Override": "Перезапись зарядного тока",
-    "RAM Voltage Display Mode": "Показ вольтажа RAM",
-    "RAM Display Unit": "Показ единицы измерения RAM",
+    "GPU Scheduling Override Method": "Метод переопределения планирования графического процессора",
+    "can be dangerous and may cause": "может быть опасным и может вызвать",
+    "damage to your battery or charger!": "повреждение аккумулятора или зарядного устройства!",
+    "Charge Current Override": "Блокировка зарядного тока",
+    "RAM Voltage Display Mode": "Режим отображения напряжения ОЗУ",
     "Polling Interval": "Интервал опроса",
-    "CPU Governor Minimum Frequency": "Минимальная частота говернора CPU",
-    "\uE150 Usage of unsafe display": "\uE150 Использование не безопасной",
-    "refresh rates may cause stress": "Не безопасная частота",
-    "or damage to your display! ": "может повредить ваш экран",
+    "CPU Governor Minimum Frequency": "Минимальная частота регулятора ЦП",
+    "refresh rates may cause stress": "частота обновления может вызвать стресс",
+    "or damage to your display! ": "или повреждение дисплея!",
     "Proceed at your own risk!": "Действуйте на свой страх и риск!",
-    "Max Handheld Display Hz": "Макс. в портативе",
-    "Display Clock": "Частота экрана",
+    "Max Handheld Display": "Макс. портативный дисплей",
+    "Display Clock": "Дисплей Часы",
     "Official Rating": "Официальный рейтинг",
     "TDP Threshold": "Порог TDP",
     "Power": "Мощность",
-    "Thermal Throttle Limit": "Предел троттлинга",
+    "Thermal Throttle Limit": "Температурный предел дроссельной заслонки",
     "HP Mode": "Режим HP",
-    "Default (Mariko)": "По умолчанию (M)",
-    "Default (Erista)": "По умолчанию (E)",
+    "Default (Mariko)": "По умолчанию (Марико)",
+    "Default (Erista)": "По умолчанию (Эриста)",
     "Rating": "Рейтинг",
-    "Safe Max (Mariko)": "Сейф Макс (M)",
-    "Safe Max (Erista)": "Сейф Макс (E)",
-    "RAM VDD2 Voltage": "Вольтаж VDD2",
-    "Voltage": "Вольтаж",
-    "RAM VDDQ Voltage": "Вольтаж VDDQ",
-    "Step Mode": "Частотный шаг",
-    "RAM Frequency Editor": "Редактор частоты",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Для высоких speedo",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (нужны невероятные speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (нужны невероятные speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (нужны невероятные speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (нужны безумные speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (нужны безумные speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (нужны безумные speedo/PLL)",
-    "Ram Max Clock": "Макс. частота",
-    "RAM Latency Editor": "Редактор задержек",
-    "1333 Latency Max": "1333 задержка",
-    "1600 Latency Max": "1600 задержка",
-    "1866 Latency Max": "1866 задержка",
-    "2133 Latency Max": "2133 задержка",
-    "RAM Timing Reductions": "Настройка таймингов",
-    "Memory Timings": "Тайминги RAM",
-    "RAM-Timing tBreak": "Разбитие таблицы таймингов",
-    "Memory": "RAM",
-    "mem": "RAM",
-    "MEM": "RAM",
-    "Profile": "Профиль",
-    "Governor": "Говернор",
-    "Advanced": "Расширенные",
-    "Docked": "В доке",
-    "Handheld": "Портатив",
-    "Charging": "На зарядке",
-    "USB Charger": "USB Зарядка",
-    "PD Charger": "PD Зарядка", 
-    "Handheld TDP": "TPD в портативе",
-    "Thermal Throttle": "Троттлинг",
-    "Uncapped Clocks": "Максимальные частоты",
-    "SoC DVB Shift": "SoC DVB сдвиг",
-    "SoC Max Volt": "Макс. вольт SoC",
-    "Overwrite Boost Mode": "Перезапись буста",
-    "Display Refresh Rate Changing": "Изменение частоты экрана",
-    "Low t6 tRTW": "Нижний t6 tRTW",
-    "Low t7 tWTR": "Нижний t7 tWTR",
-    "1333WL t2 RP Cap": "Предел 1333WL t2 RP",
-    "t6 tRTW Fine Tune": " Точная настройка t6 tRTW",
-    "tRTW Fine Tune": " Точная настройка tRTW",
-    "t7 tWTR Fine Tune": " Точная настройка t7 tWTR",
-    "tWTR Fine Tune": " Точная настройка tWTR",
+    "Safe Max (Mariko)": "Сейф Макс (Марико)",
+    "Safe Max (Erista)": "Сейф Макс (Эриста)",
+    "RAM VDD2 Voltage": "Напряжение ОЗУ VDD2",
+    "Voltage": "Напряжение",
+    "RAM VDDQ Voltage": "Напряжение ОЗУ VDDQ",
+    "RAM Frequency Editor": "Редактор частоты оперативной памяти",
+    "JEDEC.": "ДЖЕДЕК.",
+    "High speedo needed!": "Нужен высокий спидометр!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 МГц (требуется экстремальный спидометр/PLL)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 МГц (требуется экстремальный спидометр/PLL)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 МГц (требуется экстремальный спидометр/PLL)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 МГц (нужен нелепый спидометр/PLL)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 МГц (нужен нелепый спидометр/PLL)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 МГц (нужен нелепый спидометр/PLL)",
+    "Ram Max Clock": "Рам Макс Часы",
+    "RAM Latency Editor": "Редактор задержки оперативной памяти",
+    "RAM Timing Reductions": "Сокращение таймингов ОЗУ",
+    "Memory Timings": "Тайминги памяти",
+    "Advanced": "Расширенный",
+    "t6 tRTW Fine Tune": "t6 tRTW Точная настройка",
+    "tRTW Fine Tune": "tRTW Точная настройка",
+    "t7 tWTR Fine Tune": "t7 tWTR Тонкая настройка",
+    "tWTR Fine Tune": "tWTR Тонкая настройка",
     "Memory Latencies": "Задержки памяти",
     "Read Latency": "Задержка чтения",
     "Write Latency": "Задержка записи",
-    "CPU Boost Clock": "Частота буста",
-    "CPU UV": "Андервольт CPU",
-    "CPU Unlock": "Разблокировка CPU",
-    "CPU VMIN": "Мин. вольтаж",
-    "CPU Max Voltage": "Макс. вольтаж",
-    "CPU Max Clock": "Макс. частота",
-    "Extreme UV Table": "Экстримальная",
-    "CPU UV Table": "Таблица андервольта",
-    "CPU Low UV": "Андервольт нижних частот",
-    "CPU High UV": "Андервольт верхних частот",
-    "CPU Low VMIN": "Мин. вольт. нижних частот",
-    "CPU High VMIN": "Мин. вольт. верхних частот",
-    "No Undervolt": "Без андервольта",
-    "SLT Table": "Таблица SLT",
+    "CPU Boost Clock": "Тактовая частота процессора",
+    "CPU UV": "УФ процессора",
+    "CPU Unlock": "Разблокировка процессора",
+    "CPU VMIN": "ЦП VMIN",
+    "CPU Max Voltage": "Максимальное напряжение процессора",
+    "CPU Max Clock": "Максимальная частота процессора",
+    "Extreme UV Table": "Стол для экстремального УФ-излучения",
+    "CPU UV Table": "UV-таблица процессора",
+    "CPU Low UV": "ЦП с низким УФ-излучением",
+    "CPU High UV": "Процессор с высоким УФ",
+    "CPU Low VMIN": "Низкий VMIN процессора",
+    "CPU High VMIN": "Высокий VMIN процессора",
+    "No Undervolt": "Нет Андервольта",
+    "SLT Table": "Таблица ТА",
     "HiOPT Table": "Таблица HiOPT",
-    "GPU Undervolt Table": "Таблица андервольта",
-    "GPU Minimum Voltage": "Мин. вольтаж",
-    "Calculate GPU Vmin": "Вычисление мин. вольтаж",
-    "GPU VMIN": "Мин. вольтаж",
-    "GPU Maximum Voltage": "Макс. вольтаж",
-    "GPU Voltage Offset": "Смещение вольтажа",
-    "Do not override": "Не менять",
-    "Enabled (Default)": "Включено (По умолчанию)",
-    "96.6% limit": "≤96,6%",
-    "99.7% limit": "≤99,7%",
-    "GPU Scheduling Override": "Перезапись планировщика",
+    "GPU Undervolt Table": "Таблица пониженного напряжения графического процессора",
+    "GPU Minimum Voltage": "Минимальное напряжение графического процессора",
+    "Calculate GPU Vmin": "Рассчитать Vmin графического процессора",
+    "GPU VMIN": "Вмин графического процессора",
+    "GPU Maximum Voltage": "Максимальное напряжение графического процессора",
+    "GPU Voltage Offset": "Смещение напряжения графического процессора",
+    "Do not override": "Не переопределять",
+    "Enabled (Default)": "Включено (по умолчанию)",
+    "96.6% limit": "Предел 96,6%",
+    "99.7% limit": "лимит 99,7%",
+    "GPU Scheduling Override": "Переопределение планирования графического процессора",
     "Official Service": "Официальная служба",
-    "GPU DVFS Mode": "Режим DVFS",
-    "GPU DVFS Offset": "Смещение DVFS",
-    "GPU Voltage Table": "Таблица вольтажей",
-    "GPU Custom Table (mV)": "Ручная таблица (мВ)",
-    "\uE150 Setting GPU Clocks past": "\uE150 Установка частот GPU выше",
-	"1228MHz without a proper undervolt": "Установка частот GPU выше 1228 МГц",
-    "can cause degradation or damage": "без хорошего андервольта может",
-    "to your console!": "повредить вашу консоль!"
+    "GPU DVFS Mode": "Режим графического процессора DVFS",
+    "GPU DVFS Offset": "Смещение DVFS графического процессора",
+    "GPU Voltage Table": "Таблица напряжений графического процессора",
+    "GPU Custom Table (mV)": "Пользовательская таблица графического процессора (мВ)",
+    "1075MHz without UV, 1152MHz on SLT": "1075 МГц без УФ, 1152 МГц на SLT",
+    "or 1228MHz on HiOPT can cause ": "или 1228 МГц на HiOPT может привести к",
+    "permanent damage to your Switch!": "необратимое повреждение вашего коммутатора!",
+    "921MHz without UV and 960MHz on": "921 МГц без УФ и 960 МГц с включенным",
+    "SLT or HiOPT can cause ": "SLT или HiOPT могут вызвать"
 }