- IPC service for handling ReverseNX-RT communication, reducing I/O requests

- Set config for "Auto CPU Boost"/"Sync ReverseNX Mode" in overlay

- Apply hardened freq cap to handheld mode (CPU@1963MHz, GPU@921MHz)

README.md

@@ -14,8 +14,6 @@ I'd appreciate if someone is willing to contribute or upload latest binaries. Bu
 
 - Overclocking in general (often combined with overvolting and overheating) will _degrade internal components_ - SoC, VRM(Voltage Regulator Module), Battery, etc. - _faster_ than you and the manufacturer have expected.
 
-- There is **no dynamic frequency scaling** in HOS, which makes _overclocking acts differently than PC_ or other mobile devices. The console will be _sticking to what frequency you've set in the long term_, until you close the game or put it into sleep.
-
 - Higher RAM clocks without proper timings could be UNSTABLE and cause graphical glitches / instabilities / filesystem corruption. **Always make backup before usage.**
 
 
@@ -53,6 +51,9 @@ I'd appreciate if someone is willing to contribute or upload latest binaries. Bu
     - It has been proved safe without charger (not reaching battery power draw threshold)
 
   - Unsafe: CPU/GPU @ 2397/1305 MHz
+    - Without chargers, CPU/GPU would be capped @ 1963/921 MHz.
+
+    - Without official chargers, GPU would be capped @ 1267 MHz.
 
     - Why **NOT RECOMMENDED**?
       - See `Current Flow` in sys-clk-OC overlay `Miscellaneous` (on battery) or measure power draw from charger yourself.
@@ -68,24 +69,22 @@ I'd appreciate if someone is willing to contribute or upload latest binaries. Bu
     - GPU: 1305 MHz (no overvolting, less than official threshold 1050 mV)
       - NVIDIA Official Maximum: 1267.2 MHz
       - ~~Tested with deko3d compute shaders converted from Maxwell SASS assembly. Single-precision floating point (FP32 FFMA) performance maxes out at 1305 MHz.~~
-      - 1305 MHz CANNOT be set without charger connected.
 
 - **Modded sys-clk and ReverseNX**(-RT)
 
-  - No need to change clocks manually after toggling modes in ReverseNX (Optional)
-    - To disable this feature, use original version of ReverseNX-RT and remove `/config/sys-clk/ReverseNX_sync.flag`.
-
-  - Auto-Boost CPU for faster game loading (Optional)
-    - Enable CPU Boost (1785 MHz) when CPU Core#3 (System Core) is stressed, especially when the game is loading assets from eMMC/SD card (I/O ops).
-    - Auto-Boost will be enabled only when charger is connected.
-    - To disable this feature, remove `/config/sys-clk/boost.flag`.
-
   - Permanent global clock override
     - Expected usage: set maximum DRAM clocks for all games and profiles.
 
-  - View charger & battery info, toggle charging/fast-charging(2A) in overlay
+  - Miscellaneous
-    - Extend battery life expectancy by maintaining battery charge at 40% - 60% and disabling fast charging if possible.
+    - Auto CPU Boost: For faster game loading
-    - Known issue: Fast charging toggle will be reset in-game.
+      - Enable CPU Boost (1785 MHz) when CPU Core#3 (System Core) is stressed, especially when the game is loading assets from eMMC/SD card (I/O ops).
+      - Auto-Boost will be enabled only when charger is connected.
+
+    - Sync ReverseNX Mode: No need to change clocks manually after toggling modes in ReverseNX
+
+    - View charger & battery info, toggle charging/fast-charging(2A) in overlay
+      - Extend battery life expectancy by maintaining battery charge at 40% - 60% and disabling fast charging if possible.
+      - Known issue: Fast charging toggle will be reset in-game.
 
 
 

Source/ReverseNX-RT.diff

@@ -8,7 +8,7 @@ index 3e35c18..6b42bc5 100644
  *.nro
 +*.DS_Store
 diff --git a/Overlay/Makefile b/Overlay/Makefile
-index f881ed9..88fca31 100644
+index f881ed9..7184bb0 100644
 --- a/Overlay/Makefile
 +++ b/Overlay/Makefile
 @@ -38,7 +38,7 @@ include $(DEVKITPRO)/libnx/switch_rules
@@ -16,17 +16,26 @@ index f881ed9..88fca31 100644
  #---------------------------------------------------------------------------------
  APP_TITLE	:=	ReverseNX-RT
 -APP_VERSION	:=	1.0.1
-+APP_VERSION	:=	1.0.1-OC
++APP_VERSION	:=	1.0.2-OC
  
  TARGET		:=	ReverseNX-RT-ovl
  BUILD		:=	build
+@@ -53,7 +53,7 @@ NO_ICON		:=  1
+ #---------------------------------------------------------------------------------
+ ARCH		:= -march=armv8-a+crc+crypto -mtune=cortex-a57 -mtp=soft -fPIE
+ 
+-CFLAGS		:= -g -Wall -Os -ffunction-sections \
++CFLAGS		:= -g -Wall -O2 -ffunction-sections \
+ 			$(ARCH) $(DEFINES)
+ 
+ CFLAGS		+= $(INCLUDE) -D__SWITCH__ -DAPP_VERSION="\"$(APP_VERSION)\""
 diff --git a/Overlay/libs/Atmosphere-libs b/Overlay/libs/Atmosphere-libs
 index 2d522dc..c4d0335 160000
 --- a/Overlay/libs/Atmosphere-libs
 +++ b/Overlay/libs/Atmosphere-libs
 @@ -1 +1 @@
 -Subproject commit 2d522dc6a12b2eb5eb3f103a8c5b5126ca301b1a
-+Subproject commit c4d0335b79da7207b49abf1988f45b0168b692f0-dirty
++Subproject commit c4d0335b79da7207b49abf1988f45b0168b692f0
 diff --git a/Overlay/libs/libtesla b/Overlay/libs/libtesla
 index 6628524..640629f 160000
 --- a/Overlay/libs/libtesla
@@ -35,15 +44,15 @@ index 6628524..640629f 160000
 -Subproject commit 66285245361a02e5480c7bb7dac9ef6449ae6181
 +Subproject commit 640629f49f9e8997ef0769b21b26f4fc177c736f
 diff --git a/Overlay/source/main.cpp b/Overlay/source/main.cpp
-index cec060c..1a6080e 100644
+index cec060c..90c020b 100644
 --- a/Overlay/source/main.cpp
 +++ b/Overlay/source/main.cpp
-@@ -2,8 +2,12 @@
+@@ -1,9 +1,12 @@
+ #define TESLA_INIT_IMPL // If you have more than one file using the tesla header, only define this in the main one
  #include <tesla.hpp>    // The Tesla Header
++#include <atomic>
  #include "dmntcht.h"
  
-+#define PROCESS_MANAGEMENT_QLAUNCH_TID 0x0100000000001000ULL
-+
  bool def = true;
 +bool defChanged = false;
  bool isDocked = false;
@@ -51,54 +60,76 @@ index cec060c..1a6080e 100644
  bool PluginRunning = false;
  bool closed = false;
  Handle debug;
-@@ -17,9 +21,16 @@ bool dmntcht = false;
+@@ -20,6 +23,10 @@ bool plugin = false;
- bool SaltySD = false;
- bool bak = false;
- bool plugin = false;
-+bool sysclkComm = false;
-+uint8_t sysclkSyncInfoShowTick = 0;
-+constexpr uint8_t sysclkSyncChecksPerSec = 10;
-+constexpr uint8_t sysclkSyncFramesPerCheck = 60 / sysclkSyncChecksPerSec;
-+constexpr uint8_t sysclkSyncInfoShowInitTick = 3 * sysclkSyncFramesPerCheck;
-+uint8_t sysclkSyncRetry = 0;
  char DockedChar[32];
  char SystemChar[32];
  char PluginChar[36];
 +char SysclkChar[36];
++static Service g_sysclkSrv;
++static std::atomic<std::size_t> g_refCnt;
++bool sysclkComm = false;
  
  bool CheckPort () {
  	Handle saltysd;
-@@ -54,6 +65,29 @@ bool isServiceRunning(const char *serviceName) {
+@@ -54,6 +61,57 @@ bool isServiceRunning(const char *serviceName) {
  	}
  }
  
-+u64 GetCurrentApplicationId()
++#define SYSCLK_IPC_API_VERSION 1
++#define SYSCLK_IPC_SERVICE_NAME "sysclkOC"
++
++enum SysClkIpcCmd
++{
++    SysClkIpcCmd_GetApiVersion = 0,
++    SysClkIpcCmd_SetReverseNXRTMode = 11,
++};
++
++void sysclkIpcExit(void)
++{
++    if (--g_refCnt == 0)
++    {
++        serviceClose(&g_sysclkSrv);
++    }
++}
++
++Result sysclkIpcInitialize(void)
 +{
-+	// Copied from sys-clk
 +    Result rc = 0;
-+    std::uint64_t pid = 0;
-+    std::uint64_t tid = 0;
-+    rc = pmdmntGetApplicationProcessId(&pid);
 +
-+    if (rc == 0x20f)
++    g_refCnt++;
-+    {
-+        return PROCESS_MANAGEMENT_QLAUNCH_TID;
-+    }
 +
-+    rc = pminfoGetProgramId(&tid, pid);
++    if (serviceIsActive(&g_sysclkSrv))
++        return 0;
 +
-+    if (rc == 0x20f)
++    rc = smGetService(&g_sysclkSrv, SYSCLK_IPC_SERVICE_NAME);
-+    {
-+        return PROCESS_MANAGEMENT_QLAUNCH_TID;
-+    }
 +
-+    return tid;
++    if (R_FAILED(rc)) sysclkIpcExit();
++
++    return rc;
++}
++
++Result sysclkIpcGetAPIVersion(u32* out_ver)
++{
++    return serviceDispatchOut(&g_sysclkSrv, SysClkIpcCmd_GetApiVersion, *out_ver);
++}
++
++typedef enum
++{
++    ReverseNX_SystemDefault = 0,
++    ReverseNX_Handheld,
++    ReverseNX_Docked,
++    ReverseNX_RTResetToDefault,
++} ReverseNXMode;
++
++Result sysclkIpcSetReverseNXRTMode(ReverseNXMode mode)
++{
++    return serviceDispatchIn(&g_sysclkSrv, SysClkIpcCmd_SetReverseNXRTMode, mode);
 +}
 +
  class GuiTest : public tsl::Gui {
  public:
  	GuiTest(u8 arg1, u8 arg2, bool arg3) { }
-@@ -88,6 +122,7 @@ public:
+@@ -88,6 +146,7 @@ public:
  				else {
  					renderer->drawString(SystemChar, false, x, y+40, 20, renderer->a(0xFFFF));
  					renderer->drawString(DockedChar, false, x, y+60, 20, renderer->a(0xFFFF));
@@ -106,7 +137,7 @@ index cec060c..1a6080e 100644
  				}
  			}
  	}), 100);
-@@ -95,9 +130,10 @@ public:
+@@ -95,9 +154,10 @@ public:
  		if (MAGIC == 0x06BA7E39) {
  			auto *clickableListItem = new tsl::elm::ListItem("Change system control");
  			clickableListItem->setClickListener([](u64 keys) { 
@@ -118,7 +149,7 @@ index cec060c..1a6080e 100644
  						if (dmntcht == true) {
  							dmntchtWriteCheatProcessMemory(def_address, &def, 0x1);
  							dmntchtReadCheatProcessMemory(def_address, &def, 0x1);
-@@ -120,9 +156,10 @@ public:
+@@ -120,9 +180,10 @@ public:
  			
  			auto *clickableListItem2 = new tsl::elm::ListItem("Change mode");
  			clickableListItem2->setClickListener([](u64 keys) { 
@@ -130,7 +161,7 @@ index cec060c..1a6080e 100644
  						if (dmntcht == true) {
  							dmntchtWriteCheatProcessMemory(docked_address, &isDocked, 0x1);
  							dmntchtReadCheatProcessMemory(docked_address, &isDocked, 0x1);
-@@ -145,7 +182,7 @@ public:
+@@ -145,7 +206,7 @@ public:
  		else if (SaltySD == true && plugin == true && check == false) {
  			auto *clickableListItem = new tsl::elm::ListItem("(De)activate plugin");
  			clickableListItem->setClickListener([](u64 keys) { 
@@ -139,93 +170,35 @@ index cec060c..1a6080e 100644
  					if (bak == false) {
  						rename("sdmc:/SaltySD/plugins/ReverseNX-RT.elf", "sdmc:/SaltySD/plugins/ReverseNX-RT.elf.bak");
  						bak = true;
-@@ -185,6 +222,40 @@ public:
+@@ -179,12 +240,22 @@ public:
+ 			closed = true;
+ 		}
+ 		if (PluginRunning == true) {
+-			if (i > 59) {
++			if (i > 29) {
+ 				if (dmntcht == true) dmntchtReadCheatProcessMemory(docked_address, &isDocked, 0x1);
+ 				else if (R_SUCCEEDED(svcDebugActiveProcess(&debug, PID))) {
  					svcReadDebugProcessMemory(&isDocked, debug, docked_address, 0x1);
  					svcCloseHandle(debug);
  				}
-+				if (sysclkComm && isDockedChanged && def == false && bak == false)
++				if (sysclkComm && !bak) {
-+				{
++					if (!def && isDockedChanged) {
-+					u64 currentTID = GetCurrentApplicationId();
++						isDockedChanged = false;
-+					if (currentTID != PROCESS_MANAGEMENT_QLAUNCH_TID)
++						sysclkIpcSetReverseNXRTMode(isDocked ? ReverseNX_Docked : ReverseNX_Handheld);
-+					{
-+						FILE* sysclkConf = fopen("/config/sys-clk/ReverseNX-RT.conf", "wb+");
-+						if (sysclkConf)
-+						{
-+							uint8_t ctrlState = isDocked + 1;
-+							fwrite(&currentTID, 1, sizeof(currentTID), sysclkConf);
-+							fwrite(&ctrlState, 1, sizeof(ctrlState), sysclkConf);
-+							fclose(sysclkConf);
-+							sysclkSyncInfoShowTick = sysclkSyncInfoShowInitTick;
-+						}
 +					}
-+					isDockedChanged = false;
++					if (def && defChanged) {
-+				}
++						defChanged = false;
-+				if (sysclkComm && defChanged && def == true && bak == false) // change from force mode to system-controlled mode
++						sysclkIpcSetReverseNXRTMode(ReverseNX_RTResetToDefault);
-+				{
-+					u64 currentTID = GetCurrentApplicationId();
-+					if (currentTID != PROCESS_MANAGEMENT_QLAUNCH_TID)
-+					{
-+						FILE* sysclkConf = fopen("/config/sys-clk/ReverseNX-RT.conf", "wb+");
-+						if (sysclkConf)
-+						{
-+							uint8_t ctrlState = 3; // ReverseNX_RTResetToDefault
-+							fwrite(&currentTID, 1, sizeof(currentTID), sysclkConf);
-+							fwrite(&ctrlState, 1, sizeof(ctrlState), sysclkConf);
-+							fclose(sysclkConf);
-+							sysclkSyncInfoShowTick = sysclkSyncInfoShowInitTick;
-+						}
 +					}
-+					defChanged = false;
 +				}
  				i = 0;
  			}
  			else i++;
-@@ -198,11 +269,51 @@ public:
+@@ -198,11 +269,10 @@ public:
  		
  		if (bak == false) sprintf(PluginChar, "ReverseNX-RT plugin is activated.");
  		else sprintf(PluginChar, "ReverseNX-RT plugin is deactivated.");
 -	
-+
-+		if (sysclkComm)
-+		{
-+			if (sysclkSyncInfoShowTick == sysclkSyncInfoShowInitTick)
-+			{
-+				if (sysclkSyncRetry >= sysclkSyncInfoShowInitTick)
-+				{
-+					sprintf(SysclkChar, "Sys-clk Profile Sync: Error!");
-+				}
-+				else if (i % sysclkSyncFramesPerCheck == 0)
-+				{
-+					/* Check if conf file is detected by sys-clk */
-+					FILE* sysclkConf = fopen("/config/sys-clk/ReverseNX-RT.conf", "r");
-+					if (sysclkConf)
-+					{
-+						fclose(sysclkConf);
-+						sprintf(SysclkChar, "Sys-clk Profile Sync: Pending...");
-+						sysclkSyncRetry++;
-+					}
-+					else
-+					{
-+						sprintf(SysclkChar, "Sys-clk Profile Sync: Success!");
-+						sysclkSyncRetry = 0;
-+						sysclkSyncInfoShowTick--;
-+					}
-+				}
-+			}
-+			else if (sysclkSyncInfoShowTick)
-+			{
-+				if (i % sysclkSyncFramesPerCheck == 0)
-+					sysclkSyncInfoShowTick--;
-+			}
-+			else
-+			{
-+				sprintf(SysclkChar, "Sys-clk Profile Sync: ON");
-+			}
-+		}
-+		else
-+		{
-+			sprintf(SysclkChar, "Sys-clk Profile Sync: OFF");
-+		}
  	}
  
  	// Called once every frame to handle inputs not handled by other UI elements
@@ -234,54 +207,31 @@ index cec060c..1a6080e 100644
  		return false;   // Return true here to singal the inputs have been consumed
  	}
  };
-@@ -213,6 +324,7 @@ public:
+@@ -234,6 +304,13 @@ public:
- 	virtual void initServices() override {
- 		smInitialize();
- 		fsdevMountSdmc();
-+		pminfoInitialize();
- 		
- 		SaltySD = CheckPort();
- 		if (SaltySD == false) return;
-@@ -234,6 +346,19 @@ public:
  			else return;
  		}
  
-+		// Check if sys-clk exist
++		// Initialize sysclkIpc
-+		temp = fopen("sdmc:/atmosphere/contents/00FF0000636C6BFF/exefs.nsp", "r");
++		if (isServiceRunning(SYSCLK_IPC_SERVICE_NAME)) {
-+		if (temp != NULL)
++			uint32_t apiVer;
-+		{
++			if (R_SUCCEEDED(sysclkIpcInitialize()) && R_SUCCEEDED(sysclkIpcGetAPIVersion(&apiVer)) && apiVer == SYSCLK_IPC_API_VERSION)
-+			fclose(temp);
-+			temp = fopen("sdmc:/config/sys-clk/ReverseNX_sync.flag", "r");
-+			if (temp)
-+			{
 +				sysclkComm = true;
-+				fclose(temp);
-+			}
 +		}
 +
  		if (R_FAILED(pmdmntGetApplicationProcessId(&PID))) remove("sdmc:/SaltySD/ReverseNX-RT.hex");
  		else {
  			check = true;
-@@ -278,12 +403,22 @@ public:
+@@ -278,10 +355,13 @@ public:
  		
  		if (def == true) sprintf(SystemChar, "Controlled by system: Yes");
  		else sprintf(SystemChar, "Controlled by system: No");
 +
-+		if (sysclkComm)
++		sprintf(SysclkChar, "Sys-clk-OC Sync Service: %s", sysclkComm ? "ON" : "OFF");
-+		{
-+			sprintf(SysclkChar, "Sys-clk Profile Sync: ON");
-+		}
-+		else
-+		{
-+			sprintf(SysclkChar, "Sys-clk Profile Sync: OFF");
-+		}
  	
  	}  // Called at the start to initialize all services necessary for this Overlay
  	
  	virtual void exitServices() override {
++		sysclkIpcExit();
  		dmntchtExit();
  		if (dmntcht == false) svcCloseHandle(debug);
-+		pminfoExit();
  		fsdevUnmountDevice("sdmc");
- 		smExit();
- 	}  // Callet at the end to clean up all services previously initialized

Source/sys-clk-OC/README.md

@@ -77,8 +77,8 @@ To protect the battery from excessive strain, clocks requested from config may b
 |         | Handheld | Charging (USB) | Charging (Official) | Docked |
 |:-------:|:--------:|:--------------:|:-------------------:|:------:|
 | **MEM** | -        | -              | -                   | -      |
-| **CPU** | -        | -              | -                   | -      |
+| **CPU** | 1963     | -              | -                   | -      |
-| **GPU** | 1267     | -              | -                   | -      |
+| **GPU** | 921      | 1267           | -                   | -      |
 
 
 ## Installation
@@ -180,6 +180,8 @@ The `[values]` section allows you to alter timings in sys-clk, you should not ne
 
 | Key                     | Desc                                                                          | Default |
 |:-----------------------:|-------------------------------------------------------------------------------|:-------:|
+|**auto_cpu_boost**       | Auto-boost CPU when system Core #3 utilization is high                        | ON      |
+|**sync_reversenx_mode**  | Sync nominal profile (mode) with ReverseNX (-Tool and -RT)                    | ON      |
 |**temp_log_interval_ms** | Defines how often sys-clk log temperatures, in milliseconds (`0` to disable)  | 0 ms    |
 |**csv_write_interval_ms**| Defines how often sys-clk writes to the CSV, in milliseconds (`0` to disable) | 0 ms    |
 |**poll_interval_ms**     | Defines how fast sys-clk checks and applies profiles, in milliseconds         | 500 ms  |

Source/sys-clk-OC/common/include/sysclk/client/ipc.h

@@ -30,6 +30,7 @@ Result sysclkIpcGetProfiles(u64 tid, SysClkTitleProfileList* out_profiles);
 Result sysclkIpcSetProfiles(u64 tid, SysClkTitleProfileList* profiles);
 Result sysclkIpcGetConfigValues(SysClkConfigValueList* out_configValues);
 Result sysclkIpcSetConfigValues(SysClkConfigValueList* configValues);
+Result sysclkIpcSetReverseNXRTMode(ReverseNXMode mode);
 
 static inline Result sysclkIpcRemoveOverride(SysClkModule module)
 {

Source/sys-clk-OC/common/include/sysclk/clocks.h

@@ -57,6 +57,7 @@ typedef enum
     ReverseNX_SystemDefault = 0,
     ReverseNX_NotFound = 0,
     ReverseNX_NotValid = 0,
+    ReverseNX_GotValue = 0,
     ReverseNX_Handheld,
     ReverseNX_Docked,
     ReverseNX_RTResetToDefault,
@@ -65,11 +66,7 @@ typedef enum
 typedef struct
 {
     bool systemCoreBoostCPU;
-    bool systemCoreCheckStuck;
+    ReverseNXMode reverseNXMode;
-
-    ReverseNXMode  reverseNXMode;
-
-    uint64_t tickWaitTimeMs;
     uint32_t maxMEMFreq;
 } SysClkOcExtra;
 
@@ -81,7 +78,9 @@ typedef struct
     };
 } SysClkTitleProfileList;
 
-#define SYSCLK_GPU_HANDHELD_MAX_HZ 1267200000
+#define SYSCLK_CPU_HANDHELD_MAX_HZ      1963500000
+#define SYSCLK_GPU_HANDHELD_MAX_HZ      921600000
+#define SYSCLK_GPU_CHARGING_USB_MAX_HZ  1267200000
 
 extern uint32_t sysclk_g_freq_table_mem_hz[];
 extern uint32_t sysclk_g_freq_table_cpu_hz[];

Source/sys-clk-OC/common/include/sysclk/config.h

@@ -17,6 +17,8 @@ typedef enum {
     SysClkConfigValue_PollingIntervalMs = 0,
     SysClkConfigValue_TempLogIntervalMs,
     SysClkConfigValue_CsvWriteIntervalMs,
+    SysClkConfigValue_AutoCPUBoost,
+    SysClkConfigValue_SyncReverseNXMode,
     SysClkConfigValue_EnumMax,
 } SysClkConfigValue;
 
@@ -34,6 +36,10 @@ static inline const char* sysclkFormatConfigValue(SysClkConfigValue val, bool pr
             return pretty ? "Temperature logging interval (ms)" : "temp_log_interval_ms";
         case SysClkConfigValue_CsvWriteIntervalMs:
             return pretty ? "CSV write interval (ms)" : "csv_write_interval_ms";
+        case SysClkConfigValue_AutoCPUBoost:
+            return pretty ? "Enable Auto CPU Boost" : "auto_cpu_boost";
+        case SysClkConfigValue_SyncReverseNXMode:
+            return pretty ? "Enable ReverseNX Mode Sync" : "sync_reversenx_mode";
         default:
             return NULL;
     }
@@ -44,10 +50,13 @@ static inline uint64_t sysclkDefaultConfigValue(SysClkConfigValue val)
     switch(val)
     {
         case SysClkConfigValue_PollingIntervalMs:
-            return 300ULL;
+            return 500ULL;
         case SysClkConfigValue_TempLogIntervalMs:
         case SysClkConfigValue_CsvWriteIntervalMs:
             return 0ULL;
+        case SysClkConfigValue_AutoCPUBoost:
+        case SysClkConfigValue_SyncReverseNXMode:
+            return 1ULL;
         default:
             return 0ULL;
     }
@@ -62,6 +71,9 @@ static inline uint64_t sysclkValidConfigValue(SysClkConfigValue val, uint64_t in
         case SysClkConfigValue_TempLogIntervalMs:
         case SysClkConfigValue_CsvWriteIntervalMs:
             return true;
+        case SysClkConfigValue_AutoCPUBoost:
+        case SysClkConfigValue_SyncReverseNXMode:
+            return (input & 0x1) == input;
         default:
             return false;
     }

Source/sys-clk-OC/common/include/sysclk/ipc.h

@@ -13,8 +13,8 @@
 #include <stdint.h>
 #include "clocks.h"
 
-#define SYSCLK_IPC_API_VERSION 0
+#define SYSCLK_IPC_API_VERSION 1
-#define SYSCLK_IPC_SERVICE_NAME "sys:clk"
+#define SYSCLK_IPC_SERVICE_NAME "sysclkOC"
 
 enum SysClkIpcCmd
 {
@@ -29,6 +29,7 @@ enum SysClkIpcCmd
     SysClkIpcCmd_SetOverride = 8,
     SysClkIpcCmd_GetConfigValues = 9,
     SysClkIpcCmd_SetConfigValues = 10,
+    SysClkIpcCmd_SetReverseNXRTMode = 11,
 };
 
 

Source/sys-clk-OC/common/src/client/ipc.c

@@ -114,3 +114,8 @@ Result sysclkIpcSetConfigValues(SysClkConfigValueList* configValues)
 {
     return serviceDispatchIn(&g_sysclkSrv, SysClkIpcCmd_SetConfigValues, *configValues);
 }
+
+Result sysclkIpcSetReverseNXRTMode(ReverseNXMode mode)
+{
+    return serviceDispatchIn(&g_sysclkSrv, SysClkIpcCmd_SetReverseNXRTMode, mode);
+}

Source/sys-clk-OC/manager/src/status_tab.cpp

@@ -205,8 +205,12 @@ void StatusTab::updateWarningForProfile(SysClkProfile profile, bool animated)
         case SysClkProfile_Handheld:
             if (this->warningLabel->isHidden())
                 this->warningLabel->show([](){});
-
+            this->warningLabel->setText("\uE140  Handheld Mode: Max CPU freq: " + formatFreq(SYSCLK_CPU_HANDHELD_MAX_HZ) + ", Max GPU freq: " + formatFreq(SYSCLK_GPU_HANDHELD_MAX_HZ));
-            this->warningLabel->setText("\uE140  Maximum GPU frequency is " + formatFreq(SYSCLK_GPU_HANDHELD_MAX_HZ) + " because you're in handheld mode.");
+            break;
+        case SysClkProfile_HandheldChargingUSB:
+            if (this->warningLabel->isHidden())
+                this->warningLabel->show([](){});
+            this->warningLabel->setText("\uE140  USB Charging Mode: Max GPU freq: " + formatFreq(SYSCLK_GPU_CHARGING_USB_MAX_HZ));
             break;
         default:
             if (!this->warningLabel->isHidden())

Source/sys-clk-OC/overlay/src/ui/gui/misc_gui.cpp

@@ -14,12 +14,14 @@
 
 MiscGui::MiscGui()
 {
+    this->configList = new SysClkConfigValueList {};
     this->chargeInfo = new ChargeInfo {};
     this->i2cInfo    = new I2cInfo {};
 }
 
 MiscGui::~MiscGui()
 {
+    delete this->configList;
     delete this->chargeInfo;
     delete this->i2cInfo;
 }
@@ -28,11 +30,36 @@ void MiscGui::preDraw(tsl::gfx::Renderer* render)
 {
     BaseMenuGui::preDraw(render);
 
-    render->drawString(this->infoOutput, false, 40, 300, SMALL_TEXT_SIZE, DESC_COLOR);
+    render->drawString(this->infoOutput, false, 40, 440, SMALL_TEXT_SIZE, DESC_COLOR);
+}
+
+tsl::elm::ToggleListItem* MiscGui::addConfigToggle(SysClkConfigValue configVal, std::string labelName) {
+    tsl::elm::ToggleListItem* toggle = new tsl::elm::ToggleListItem(labelName, this->configList->values[configVal]);
+    toggle->setStateChangedListener([this, configVal](bool state) {
+        this->configList->values[configVal] = uint64_t(state);
+        Result rc = sysclkIpcSetConfigValues(this->configList);
+        if (R_FAILED(rc))
+            FatalGui::openWithResultCode("sysclkIpcSetConfigValues", rc);
+
+        this->lastContextUpdate = armGetSystemTick();
+    });
+    this->listElement->addItem(toggle);
+    return toggle;
+}
+
+void MiscGui::updateConfigToggle(tsl::elm::ToggleListItem *toggle, SysClkConfigValue configVal) {
+    if (toggle != nullptr) {
+        toggle->setState(this->configList->values[configVal]);
+    }
 }
 
 void MiscGui::listUI()
 {
+    sysclkIpcGetConfigValues(this->configList);
+
+    this->cpuBoostToggle = addConfigToggle(SysClkConfigValue_AutoCPUBoost, "Auto CPU Boost");
+    this->syncModeToggle = addConfigToggle(SysClkConfigValue_SyncReverseNXMode, "Sync ReverseNX Mode");
+
     // Charging
     this->chargingToggle = new tsl::elm::ToggleListItem("Charging", false);
     chargingToggle->setStateChangedListener([this](bool state) {
@@ -63,9 +90,14 @@ void MiscGui::listUI()
     this->listElement->addItem(this->fastChargingToggle);
 }
 
-void MiscGui::update()
+void MiscGui::refresh() {
-{
+    BaseMenuGui::refresh();
-    BaseMenuGui::update();
+
+    if (this->context) {
+        sysclkIpcGetConfigValues(this->configList);
+        updateConfigToggle(this->cpuBoostToggle, SysClkConfigValue_AutoCPUBoost);
+        updateConfigToggle(this->syncModeToggle, SysClkConfigValue_SyncReverseNXMode);
+    }
 
     if (++frameCounter >= 60)
     {

Source/sys-clk-OC/overlay/src/ui/gui/misc_gui.h

@@ -20,7 +20,7 @@ class MiscGui : public BaseMenuGui
         ~MiscGui();
         void preDraw(tsl::gfx::Renderer* render) override;
         void listUI() override;
-        void update() override;
+        void refresh() override;
 
     protected:
         typedef enum {
@@ -307,8 +307,12 @@ class MiscGui : public BaseMenuGui
             return PsmIsFastCharging() == enable;
         }
 
-        tsl::elm::ToggleListItem *chargingToggle, *fastChargingToggle;
+        tsl::elm::ToggleListItem* addConfigToggle(SysClkConfigValue, std::string);
+        void updateConfigToggle(tsl::elm::ToggleListItem*, SysClkConfigValue);
 
+        tsl::elm::ToggleListItem *cpuBoostToggle, *syncModeToggle, *chargingToggle, *fastChargingToggle;
+
+        SysClkConfigValueList* configList;
         ChargeInfo* chargeInfo;
         I2cInfo*    i2cInfo;
         bool isEnoughPowerSupplied = false;

Source/sys-clk-OC/sysmodule/perms.json

@@ -1,5 +1,5 @@
 {
-	"name": "sys:clk",
+	"name": "sysclkOC",
 	"title_id": "0x00FF0000636C6BFF",
 	"title_id_range_min": "0x00FF0000636C6BFF",
 	"title_id_range_max": "0x00FF0000636C6BFF",
@@ -18,7 +18,7 @@
 		"*"
 	],
 	"service_host": [
-		"sys:clk"
+		"sysclkOC"
 	],
 	"kernel_capabilities": [
 		{

Source/sys-clk-OC/sysmodule/src/clock_manager.cpp

@@ -60,7 +60,6 @@ ClockManager::ClockManager()
     this->oc = new SysClkOcExtra;
     this->oc->systemCoreBoostCPU = false;
     this->oc->reverseNXMode = ReverseNX_NotFound;
-    this->oc->tickWaitTimeMs = 0;
     this->oc->maxMEMFreq = 0;
 }
 
@@ -77,7 +76,7 @@ bool ClockManager::IsCpuBoostMode()
     return (confId == 0x92220009 || confId == 0x9222000A);
 }
 
-bool ClockManager::IsReverseNXEnabled()
+bool ClockManager::IsReverseNXModeValid()
 {
     return (this->oc->reverseNXMode);
 }
@@ -113,7 +112,7 @@ uint32_t ClockManager::GetHz(SysClkModule module)
         hz = this->config->GetAutoClockHz(this->context->applicationId, module, this->context->profile);
 
     /* Return pre-set hz if ReverseNX is enabled, downclock is disabled when realProfile == Docked */
-    if (!hz && IsReverseNXEnabled())
+    if (!hz && IsReverseNXModeValid())
     {
         switch(module)
         {
@@ -198,10 +197,11 @@ void ClockManager::Tick()
 void ClockManager::WaitForNextTick()
 {
     /* Self-check system core (#3) usage via idleticks at intervals (Not enabled at higher CPU freq or without charger) */
-    this->oc->tickWaitTimeMs = this->GetConfig()->GetConfigValue(SysClkConfigValue_PollingIntervalMs);
+    uint64_t tickWaitTimeMs = this->GetConfig()->GetConfigValue(SysClkConfigValue_PollingIntervalMs);
-    uint64_t tickWaitTimeNs = this->oc->tickWaitTimeMs * 1000000ULL;
+    uint64_t tickWaitTimeNs = tickWaitTimeMs * 1000000ULL;
 
-    if (   FileUtils::IsBoostEnabled()
+    uint64_t isAutoBoostEnabled = this->GetConfig()->GetConfigValue(SysClkConfigValue_AutoCPUBoost);
+    if (   isAutoBoostEnabled
         && this->context->realProfile != SysClkProfile_Handheld
         && this->context->enabled
         && this->context->freqs[SysClkModule_CPU] <= CPU_BOOST_FREQ)
@@ -214,7 +214,7 @@ void ClockManager::WaitForNextTick()
         /* Convert idletick to free% */
         /* If CPU core usage is 0%, then idletick = 19'200'000 per sec */
         uint64_t systemCoreIdleTick = systemCoreIdleTickNext - systemCoreIdleTickPrev;
-        uint64_t freeIdleTick = 19'200 * this->oc->tickWaitTimeMs;
+        uint64_t freeIdleTick = 19'200 * tickWaitTimeMs;
         uint8_t  freePerc = systemCoreIdleTick / (freeIdleTick / 100);
 
         uint8_t systemCoreBoostFreeThreshold = 5;
@@ -244,62 +244,11 @@ void ClockManager::WaitForNextTick()
     {
         svcSleepThread(tickWaitTimeNs);
     }
-
-    /* Signal that systemCore is not busy */
-    // {
-    //     std::scoped_lock lock{this->systemCoreStuckCountMutex};
-    //     this->oc->systemCoreStuckCount = 0;
-    // }
 }
 
-/* Tricky part, see IpcService implementation of calling static member function */
-// void ClockManager::CheckSystemCoreStuck(void *arg)
-// {
-//     ClockManager* clkMgr = (ClockManager*)arg;
-//     while (clkMgr->oc->systemCoreCheckStuck)
-//     {
-//         svcSleepThread(clkMgr->oc->tickWaitTimeMs * 1000000ULL);
-
-//         if (clkMgr->context->freqs[SysClkModule_CPU] >= clkMgr->CPU_BOOST_FREQ)
-//             continue;
-
-//         // Core #0,1,2 will check if Core#3 is stuck (threshold count = 2*3 = 6)
-//         {
-//             std::scoped_lock lock{clkMgr->systemCoreStuckCountMutex};
-//             if (++clkMgr->oc->systemCoreStuckCount > 6)
-//             {
-//                 clkMgr->oc->systemCoreStuckCount = -6;
-//                 Clocks::SetHz(SysClkModule_CPU, clkMgr->CPU_BOOST_FREQ);
-//             }
-//         }
-//     }
-// }
-
-// void ClockManager::StartCheckSystemCore()
-// {
-//     this->oc->systemCoreCheckStuck = true;
-//     threadCreate(&this->t_CheckSystemCoreStuck_0, this->CheckSystemCoreStuck, this, NULL, 0x1000, 0x20, 0);
-//     threadCreate(&this->t_CheckSystemCoreStuck_1, this->CheckSystemCoreStuck, this, NULL, 0x1000, 0x20, 1);
-//     threadCreate(&this->t_CheckSystemCoreStuck_2, this->CheckSystemCoreStuck, this, NULL, 0x1000, 0x20, 2);
-//     threadStart(&this->t_CheckSystemCoreStuck_0);
-//     threadStart(&this->t_CheckSystemCoreStuck_1);
-//     threadStart(&this->t_CheckSystemCoreStuck_2);
-// }
-
-// void ClockManager::StopCheckSystemCore()
-// {
-//     this->oc->systemCoreCheckStuck = false;
-//     threadWaitForExit(&this->t_CheckSystemCoreStuck_0);
-//     threadWaitForExit(&this->t_CheckSystemCoreStuck_1);
-//     threadWaitForExit(&this->t_CheckSystemCoreStuck_2);
-//     threadClose(&this->t_CheckSystemCoreStuck_0);
-//     threadClose(&this->t_CheckSystemCoreStuck_1);
-//     threadClose(&this->t_CheckSystemCoreStuck_2);
-// }
-
 SysClkProfile ClockManager::ReverseNXProfileHandler()
 {
-    if (!IsReverseNXEnabled())
+    if (!IsReverseNXModeValid())
     {
         return this->context->realProfile;
     }
@@ -318,52 +267,33 @@ SysClkProfile ClockManager::ReverseNXProfileHandler()
     return this->context->realProfile;
 }
 
-ReverseNXMode ClockManager::ReverseNXFileHandler(bool checkTool, const char* filePath)
+ReverseNXMode ClockManager::ReverseNXFileHandler(const char* filePath)
 {
     FILE *readFile;
     readFile = fopen(filePath, "rb");
 
     if (!readFile)
-    {
         return ReverseNX_NotFound;
-    }
 
-    if (checkTool)
+    uint64_t magicDocked   = 0xD65F03C0320003E0;
-    {
+    uint64_t magicHandheld = 0xD65F03C052A00000;
-        uint64_t magicDocked   = 0xD65F03C0320003E0;
-        uint64_t magicHandheld = 0xD65F03C052A00000;
 
-        uint64_t readBuffer = 0;
+    uint64_t readBuffer = 0;
-        fread(&readBuffer, 1, sizeof(readBuffer), readFile);
+    fread(&readBuffer, 1, sizeof(readBuffer), readFile);
-        fclose(readFile);
+    fclose(readFile);
 
-        if (!memcmp(&readBuffer, &magicDocked, sizeof(readBuffer)))
+    if (!memcmp(&readBuffer, &magicDocked, sizeof(readBuffer)))
-            return ReverseNX_Docked;
+        return ReverseNX_Docked;
 
-        if (!memcmp(&readBuffer, &magicHandheld, sizeof(readBuffer)))
+    if (!memcmp(&readBuffer, &magicHandheld, sizeof(readBuffer)))
-            return ReverseNX_Handheld;
+        return ReverseNX_Handheld;
-    }
-    else // checkRT
-    {
-        uint64_t tidBuffer = 0;
-        uint8_t ctrlBuffer = 0;
-        fread(&tidBuffer, 1, sizeof(tidBuffer), readFile);
-        fread(&ctrlBuffer, 1, sizeof(ctrlBuffer), readFile);
-        fclose(readFile);
-        remove(filePath);
-
-        if (!memcmp(&this->context->applicationId, &tidBuffer, sizeof(tidBuffer)))
-        {
-            return static_cast<ReverseNXMode>(ctrlBuffer);
-        }
-    }
 
     return ReverseNX_NotValid;
 }
 
 void ClockManager::CheckReverseNXTool()
 {
-    bool shouldCheckReverseNXTool = FileUtils::IsReverseNXSyncEnabled() && FileUtils::ExistReverseNXTool();
+    bool shouldCheckReverseNXTool = FileUtils::ExistReverseNXTool();
     if (!shouldCheckReverseNXTool)
         return;
 
@@ -375,13 +305,13 @@ void ClockManager::CheckReverseNXTool()
 
         /* Check global override */
         snprintf(asmFilePath, sizeof(asmFilePath), "/SaltySD/patches/%s", asmFileName);
-        getMode = ReverseNXFileHandler(true, asmFilePath);
+        getMode = ReverseNXFileHandler(asmFilePath);
 
         if (!getMode)
         {
             /* Check per-game override */
             snprintf(asmFilePath, sizeof(asmFilePath), "/SaltySD/patches/%016lX/%s", this->context->applicationId, asmFileName);
-            getMode = ReverseNXFileHandler(true, asmFilePath);
+            getMode = ReverseNXFileHandler(asmFilePath);
         }
     }
 
@@ -390,13 +320,9 @@ void ClockManager::CheckReverseNXTool()
 
 bool ClockManager::CheckReverseNXRT()
 {
-    bool shouldCheckReverseNXRT = FileUtils::IsReverseNXSyncEnabled();
-    if (!shouldCheckReverseNXRT)
-        return false;
-
     bool shouldAdjustProfile = false;
 
-    ReverseNXMode getMode = ReverseNXFileHandler(false, FILE_REVERSENX_RT_CONF_PATH);
+    ReverseNXMode getMode = this->GetConfig()->GetReverseNXRTModeAndClear();
     if (getMode)
     {
         this->oc->reverseNXMode = getMode;
@@ -415,6 +341,7 @@ bool ClockManager::RefreshContext()
 {
     bool hasChanged = false;
     bool enabled = this->GetConfig()->Enabled();
+    uint64_t isReverseNXSyncEnabled = this->GetConfig()->GetConfigValue(SysClkConfigValue_SyncReverseNXMode);
     if(enabled != this->context->enabled)
     {
         this->context->enabled = enabled;
@@ -430,8 +357,10 @@ bool ClockManager::RefreshContext()
         hasChanged = true;
 
         /* Clear ReverseNX state and recheck -Tool patches*/
-        this->oc->reverseNXMode = ReverseNX_SystemDefault;
+        if (isReverseNXSyncEnabled) {
-        CheckReverseNXTool();
+            this->oc->reverseNXMode = ReverseNX_SystemDefault;
+            CheckReverseNXTool();
+        }
     }
 
     SysClkProfile profile = Clocks::GetCurrentProfile();
@@ -460,9 +389,11 @@ bool ClockManager::RefreshContext()
         Clocks::ResetToStock();
 
     /* Check ReverseNX-RT and adjust nominal profile when context changes */
-    hasChanged |= CheckReverseNXRT();
+    if (isReverseNXSyncEnabled) {
-    if (hasChanged)
+        hasChanged |= CheckReverseNXRT();
-        this->context->profile = ReverseNXProfileHandler();
+        if (hasChanged)
+            this->context->profile = ReverseNXProfileHandler();
+    }
 
     std::uint32_t hz = 0;
     for (unsigned int module = 0; module < SysClkModule_EnumMax; module++)

Source/sys-clk-OC/sysmodule/src/clock_manager.h

@@ -50,20 +50,13 @@ class ClockManager
     const uint32_t CPU_BOOST_FREQ = 1785'000'000;
 
     bool IsCpuBoostMode();
-    bool IsReverseNXEnabled();
+    bool IsReverseNXModeValid();
     bool IsReverseNXDocked();
 
     uint32_t GetHz(SysClkModule);
     SysClkProfile ReverseNXProfileHandler();
-    ReverseNXMode ReverseNXFileHandler(bool, const char*);
+    ReverseNXMode ReverseNXFileHandler(const char*);
 
     void CheckReverseNXTool();
     bool CheckReverseNXRT();
-
-    // LockableMutex systemCoreStuckCountMutex;
-    // Thread t_CheckSystemCoreStuck_0, t_CheckSystemCoreStuck_1, t_CheckSystemCoreStuck_2;
-
-    // static void CheckSystemCoreStuck(void *arg);
-    // void StartCheckSystemCore();
-    // void StopCheckSystemCore();
 };

Source/sys-clk-OC/sysmodule/src/clocks.cpp

@@ -297,12 +297,19 @@ std::uint32_t Clocks::GetNearestHz(SysClkModule module, SysClkProfile profile, s
 
 std::uint32_t Clocks::GetMaxAllowedHz(SysClkModule module, SysClkProfile profile)
 {
-    if(module == SysClkModule_GPU)
+    switch (module) {
-    {
+        case SysClkModule_CPU:
-        if(profile < SysClkProfile_HandheldCharging)
+            if (profile == SysClkProfile_Handheld)
-        {
+                return SYSCLK_CPU_HANDHELD_MAX_HZ;
-            return SYSCLK_GPU_HANDHELD_MAX_HZ;
+            break;
-        }
+        case SysClkModule_GPU:
+            if (profile == SysClkProfile_Handheld)
+                return SYSCLK_GPU_HANDHELD_MAX_HZ;
+            if (profile == SysClkProfile_HandheldChargingUSB)
+                return SYSCLK_GPU_CHARGING_USB_MAX_HZ;
+            break;
+        default:
+            break;
     }
 
     return 0;

Source/sys-clk-OC/sysmodule/src/config.cpp

@@ -35,6 +35,8 @@ Config::Config(std::string path)
     {
         this->configValues[i] = sysclkDefaultConfigValue((SysClkConfigValue)i);
     }
+
+    this->reverseNXRTMode = ReverseNX_NotFound;
 }
 
 Config::~Config()
@@ -480,3 +482,15 @@ bool Config::SetConfigValues(SysClkConfigValueList* configValues, bool immediate
 
     return true;
 }
+
+ReverseNXMode Config::GetReverseNXRTModeAndClear() {
+    std::scoped_lock lock{this->reverseNXRTMutex};
+    ReverseNXMode mode = this->reverseNXRTMode;
+    this->reverseNXRTMode = ReverseNX_GotValue;
+    return mode;
+}
+
+void Config::SetReverseNXRTMode(ReverseNXMode mode) {
+    std::scoped_lock lock{this->reverseNXRTMutex};
+    this->reverseNXRTMode = mode;
+}

Source/sys-clk-OC/sysmodule/src/config.h

@@ -47,6 +47,8 @@ class Config
     const char* GetConfigValueName(SysClkConfigValue val, bool pretty);
     void GetConfigValues(SysClkConfigValueList* out_configValues);
     bool SetConfigValues(SysClkConfigValueList* configValues, bool immediate);
+    ReverseNXMode GetReverseNXRTModeAndClear();
+    void SetReverseNXRTMode(ReverseNXMode);
   protected:
     void Load();
     void Close();
@@ -63,7 +65,9 @@ class Config
     time_t mtime;
     LockableMutex configMutex;
     LockableMutex overrideMutex;
+    LockableMutex reverseNXRTMutex;
     std::atomic_bool enabled;
     std::uint32_t overrideFreqs[SysClkModule_EnumMax];
     std::uint64_t configValues[SysClkConfigValue_EnumMax];
+    ReverseNXMode reverseNXRTMode;
 };

Source/sys-clk-OC/sysmodule/src/file_utils.cpp

@@ -18,9 +18,7 @@ static LockableMutex g_log_mutex;
 static LockableMutex g_csv_mutex;
 static std::atomic_bool g_has_initialized = false;
 static bool g_log_enabled = false;
-static bool g_boost_enabled = false;
 static bool g_reversenx_tool_exist = false;
-static bool g_reversenx_sync_enabled = false;
 static std::uint64_t g_last_flag_check = 0;
 
 extern "C" void __libnx_init_time(void);
@@ -136,20 +134,6 @@ void FileUtils::RefreshFlags(bool force)
 void FileUtils::InitCheckFlags()
 {
     FILE *file;
-    file = fopen(FILE_BOOST_FLAG_PATH, "r");
-    if (file)
-    {
-        g_boost_enabled = true;
-        fclose(file);
-    }
-
-    file = fopen(FILE_REVERSENX_SYNC_FLAG_PATH, "r");
-    if (file)
-    {
-        g_reversenx_sync_enabled = true;
-        fclose(file);
-    }
-
     file = fopen(FILE_SALTYNX_PATH, "r");
     if (file)
     {
@@ -158,21 +142,11 @@ void FileUtils::InitCheckFlags()
     }
 }
 
-bool FileUtils::IsBoostEnabled()
-{
-    return g_boost_enabled;
-}
-
 bool FileUtils::ExistReverseNXTool()
 {
     return g_reversenx_tool_exist;
 }
 
-bool FileUtils::IsReverseNXSyncEnabled()
-{
-    return g_reversenx_sync_enabled;
-}
-
 void FileUtils::InitializeAsync()
 {
     Thread initThread = {0};

Source/sys-clk-OC/sysmodule/src/file_utils.h

@@ -22,9 +22,7 @@
 #define FILE_CONTEXT_CSV_PATH FILE_CONFIG_DIR "/context.csv"
 #define FILE_LOG_FLAG_PATH FILE_CONFIG_DIR "/log.flag"
 #define FILE_LOG_FILE_PATH FILE_CONFIG_DIR "/log.txt"
-#define FILE_BOOST_FLAG_PATH FILE_CONFIG_DIR "/boost.flag"
 #define FILE_SALTYNX_PATH "/atmosphere/contents/0000000000534C56/flags/boot2.flag" // Just check for SaltyNX boot flag
-#define FILE_REVERSENX_SYNC_FLAG_PATH FILE_CONFIG_DIR "/ReverseNX_sync.flag"
 #define FILE_REVERSENX_RT_CONF_PATH FILE_CONFIG_DIR "/ReverseNX-RT.conf"
 
 class FileUtils
@@ -34,8 +32,6 @@ class FileUtils
     static Result Initialize();
     static bool IsInitialized();
     static bool IsLogEnabled();
-    static bool IsBoostEnabled();
-    static bool IsReverseNXSyncEnabled();
     static bool ExistReverseNXTool();
     static void InitializeAsync();
     static void LogLine(const char *format, ...);

Source/sys-clk-OC/sysmodule/src/ipc_service.cpp

@@ -153,6 +153,13 @@ Result IpcService::ServiceHandlerFunc(void* arg, const IpcServerRequest* r, u8*
                 return ipcSrv->SetConfigValues((SysClkConfigValueList*)r->data.ptr);
             }
             break;
+
+        case SysClkIpcCmd_SetReverseNXRTMode:
+            if (r->data.size >= sizeof(ReverseNXMode)) {
+                ReverseNXMode mode = *((ReverseNXMode*)r->data.ptr);
+                return ipcSrv->SetReverseNXRTMode(mode);
+            }
+            break;
     }
 
     return SYSCLK_ERROR(Generic);
@@ -288,4 +295,10 @@ Result IpcService::SetConfigValues(SysClkConfigValueList* configValues)
     }
 
     return 0;
-}
+}
+
+Result IpcService::SetReverseNXRTMode(ReverseNXMode mode) {
+    Config* config = ClockManager::GetInstance()->GetConfig();
+    config->SetReverseNXRTMode(mode);
+    return 0;
+}

Source/sys-clk-OC/sysmodule/src/ipc_service.h

@@ -36,6 +36,7 @@ class IpcService
     Result SetOverride(SysClkIpc_SetOverride_Args* args);
     Result GetConfigValues(SysClkConfigValueList* out_configValues);
     Result SetConfigValues(SysClkConfigValueList* configValues);
+    Result SetReverseNXRTMode(ReverseNXMode mode);
 
     bool running;
     Thread thread;