Erista timing fixes

dram_timings struct uses tRP and tRFC stock values in ns.
nWR in emc_mrw needed to be adjusted.

.gitignore

@@ -6,3 +6,5 @@ __pycache__/
 build
 *.dksh
 Source/hekate
+dist/*
+!dist/.gitignore

README.md

@@ -21,7 +21,7 @@
 
 > **THIS TOOL CAN BE DANGEROUS IF MISUSED. PROCEED WITH CAUTION.**
 > Due to the design of Horizon OS, **overclocking RAM can cause NAND OR SD CORRUPTION.**
-> Ensure you have a **full NAND, PROINFO, EMUMMC and SD backup** before proceeding.
+> Ensure you have a **full NAND, PRODINFO, EMUMMC and SD backup** before proceeding.
 
 ---
 
@@ -72,6 +72,12 @@ It enables advanced CPU, GPU, and RAM tuning with user-friendly configuration to
 
 ---
 
+## Donating
+
+We don't accept donations. Put your spare cash into a charity instead :)
+
+---
+
 ## Building from Source
 
 Refer to COMPILATION.md
@@ -160,9 +166,9 @@ Refer to COMPILATION.md
 * 612 → sleep mode
 
 ### GPU clocks (mhz)
-* 1536 → absolute max clock on mariko. very dangerous
-* 1459
-* 1382
+* 1536 → absolute max clock on mariko. Dangerous
+* 1497 → max mariko unsafe clock 
+* 1382 → Max mariko "safe" clock
 * 1305
 * 1267 → NVIDIA T214(mariko) rating
 * 1228 → mariko High UV safe clock

Source/Atmosphere/stratosphere/loader/source/oc/customize.cpp

@@ -61,7 +61,7 @@ volatile CustomizeTable C = {
 
 /* At 1333WL, for some reason (incorrect ram timing config in mtc table?), tRP causes crashes at high reductions - 2 seems to be the most common limit. */
 /* This is a lazy workaround until I find the issue... */
-.t2_tRP_cap = 2,
+.t2_tRP_cap = 1,
 
 /* Frequency where non low timings gets used. */
 .timingEmcTbreak = DISABLED,
@@ -89,7 +89,7 @@ volatile CustomizeTable C = {
 },
 
 .eristaCpuUV      = 0,
-.eristaCpuVmin    = 800,
+.eristaCpuVmin    = 825,
 .eristaCpuMaxVolt = 1200,
 /* Unlocks up to 2397 Mhz CPU, usage is not recommended. */
 .eristaCpuUnlock  = DISABLED,
@@ -177,8 +177,8 @@ volatile CustomizeTable C = {
                     AUTO  /* 1075                         */,
                     AUTO  /* 1152 (HioPT / High UV only!) */,
                     AUTO  /* 1228 (High UV Only!)         */,
-    DEACTIVATED_GPU_FREQ  /* 1267 (Disabled by default)   */,
-    DEACTIVATED_GPU_FREQ  /* 1305 (Disabled by default)   */,
+                    AUTO  /* 1267 (High UV Only!)         */,
+                    AUTO  /* 1305 (High UV Only!)         */,
     DEACTIVATED_GPU_FREQ  /* 1344 (Disabled by default)   */,
     DEACTIVATED_GPU_FREQ  /* 1382 (Disabled by default)   */,
     DEACTIVATED_GPU_FREQ  /* 1420 (Disabled by default)   */,
@@ -215,6 +215,8 @@ volatile CustomizeTable C = {
     0 /* >= 3133 */,
     0 /* >= 3166 */,
     0 /* >= 3200 */,
+    0 /* >= 3266 */,
+    0 /* >= 3333 */,
 },
 
 /* Advanced. */
@@ -434,30 +436,33 @@ volatile CustomizeTable C = {
 },
 
 .eristaGpuDvfsTableSLT = {
-    {  76800, { }, {  814294, 8144, -940, 0, 0, 226, } },
-    { 115200, { }, {  856185, 8144, -940, 0, 0, 226, } },
-    { 153600, { }, {  856185, 8144, -940, 0, 0, 226, } },
-    { 192000, { }, {  908077, 8144, -940, 0, 0, 226, } },
-    { 230400, { }, {  908077, 8144, -940, 0, 0, 226, } },
-    { 268800, { }, {  934968, 8144, -940, 0, 0, 226, } },
-    { 307200, { }, {  934968, 8144, -940, 0, 0, 226, } },
-    { 345600, { }, {  952860, 8144, -940, 0, 0, 226, } },
-    { 384000, { }, {  952860, 8144, -940, 0, 0, 226, } },
-    { 422400, { }, {  978751, 8144, -940, 0, 0, 226, } },
-    { 460800, { }, {  978751, 8144, -940, 0, 0, 226, } },
-    { 499200, { }, {  990642, 8144, -940, 0, 0, 226, } },
-    { 537600, { }, {  990642, 8144, -940, 0, 0, 226, } },
-    { 576000, { }, { 1017534, 8144, -940, 0, 0, 226, } },
-    { 614400, { }, { 1017534, 8144, -940, 0, 0, 226, } },
-    { 652800, { }, { 1042425, 8144, -940, 0, 0, 226, } },
-    { 691200, { }, { 1042425, 8144, -940, 0, 0, 226, } },
-    { 729600, { }, { 1066317, 8144, -940, 0, 0, 226, } },
-    { 768000, { }, { 1066317, 8144, -940, 0, 0, 226, } },
-    { 806400, { }, { 1093208, 8144, -940, 0, 0, 226, } },
-    { 844800, { }, { 1093208, 8144, -940, 0, 0, 226, } },
-    { 883200, { }, { 1118100, 8144, -940, 0, 0, 226, } },
-    { 921600, { }, { 1118100, 8144, -940, 0, 0, 226, } },
-    { 960000, { }, { 1156991, 8144, -940, 0, 0, 226, } },
+    {   76800, { }, { 700000, } },
+    {  153600, { }, { 700000, } },
+    {  192000, { }, { 705000, } },
+    {  230400, { }, { 710000, } },
+    {  268800, { }, { 720000, } },
+    {  307200, { }, { 730000, } },
+    {  345600, { }, { 740000, } },
+    {  384000, { }, { 750000, } },
+    {  422400, { }, { 760000, } },
+    {  460800, { }, { 770000, } },
+    {  499200, { }, { 780000, } },
+    {  537600, { }, { 790000, } },
+    {  576000, { }, { 800000, } },
+    {  614400, { }, { 810000, } },
+    {  652800, { }, { 820000, } },
+    {  691200, { }, { 830000, } },
+    {  729600, { }, { 850000, } },
+    {  768000, { }, { 860000, } },
+    {  806400, { }, { 875000, } },
+    {  844800, { }, { 885000, } },
+    {  883200, { }, { 900000, } },
+    {  921600, { }, { 910000, } },
+    {  960000, { }, { 930000, } },
+    // {  998400, { }, { 945000, } },
+    // { 1036800, { }, {          } },
+    // { 1152000, { }, {          } },
+    // { 1075200, { }, {          } },
 },
 
 .eristaGpuDvfsTableHiOPT = {
@@ -568,8 +573,15 @@ volatile CustomizeTable C = {
     {  998400, { }, { 1065665, -16075, -497, -179,  3213,   9 } },
     { 1075200, { }, { 1132576, -16093, -648,    0,  1077,  40 } },
     { 1152000, { }, { 1180029, -14534, -830,    0,  1469, 110 } },
-//  { 1228800, { }, { 1238293, -16383, -859,    0,  3722, 313 } },
-//  { 1267200, { }, { 1276399, -17475, -867,    0,  3681, 559 } },
+    { 1228800, { }, { 1238293, -16383, -859,    0,  3722, 313 } },
+    { 1267200, { }, { 1276399, -17475, -867,    0,  3681, 559 } },
+    { 1305600, { }, {                                         } },
+    { 1344000, { }, {                                         } },
+    { 1382400, { }, {                                         } },
+    { 1420800, { }, {                                         } },
+    { 1459200, { }, {                                         } },
+    { 1497600, { }, {                                         } },
+    { 1536000, { }, {                                         } },
 },
 
 .marikoGpuDvfsTableHighUV = {

Source/Atmosphere/stratosphere/loader/source/oc/customize.hpp

@@ -20,8 +20,8 @@
 
 #pragma once
 
-#define CUST_REV 5
-#define KIP_VERSION 242
+#define CUST_REV 6
+#define KIP_VERSION 250
 
 #include "oc_common.hpp"
 #include "pcv/pcv_common.hpp"
@@ -128,7 +128,7 @@ struct CustomizeTable {
 
     u32 eristaGpuVoltArray[27];
     u32 marikoGpuVoltArray[24];
-    s32 marikoSocVoltArray[26];
+    s32 marikoSocVoltArray[28];
 
     u32 fineTune_t6_tRTW;
     u32 fineTune_t7_tWTR;

Source/Atmosphere/stratosphere/loader/source/oc/oc_common.hpp

@@ -24,10 +24,7 @@
 #define CRASH(msg, ...) { ams::diag::AbortImpl(msg, __PRETTY_FUNCTION__, "", 0); __builtin_unreachable(); }
 
 #include "customize.hpp"
-
-#if defined(AMS_BUILD_FOR_AUDITING) || defined(AMS_BUILD_FOR_DEBUGGING)
-    #include "oc_log.hpp"
-#endif
+#include "oc_log.hpp"
 
 #define PATCH_OFFSET(offset, value) \
     static_assert(sizeof(__typeof__(offset)) <= sizeof(u64)); \

Source/Atmosphere/stratosphere/loader/source/oc/oc_log.hpp

@@ -21,6 +21,7 @@
 
 namespace ams::ldr::hoc {
 
+    Result SmcCopyToIram(uintptr_t dest, const void *src, u32 size);
     void Log(const char *data, ...);
     void ViewLog();
 

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv.cpp

@@ -170,6 +170,12 @@ namespace ams::ldr::hoc::pcv {
         }
     }
 
+    void WriteKipLoadToIram() {
+        const u32 hocMagic                   = 0x686F634D;
+        constexpr uintptr_t LoadMagicAddress = 0x4003DC00; /* Should be a pretty safe address. */
+        R_DISCARD(SmcCopyToIram(LoadMagicAddress, &hocMagic, sizeof(hocMagic)));
+    }
+
     void Patch(uintptr_t mapped_nso, size_t nso_size) {
         SafetyCheck();
 
@@ -179,6 +185,8 @@ namespace ams::ldr::hoc::pcv {
         } else {
             erista::Patch(mapped_nso, nso_size);
         }
+
+        WriteKipLoadToIram();
     }
 
 }

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv_common.hpp

@@ -48,6 +48,35 @@ namespace ams::ldr::hoc::pcv {
         u64 dvco_calibration_max;
     };
 
+    /*
+    struct CvbCpuDfllData {
+        u32 tune0_low;
+        u32 tune0_high;
+        u32 tune1_low;
+        u32 tune1_high;
+        u64 padding;
+        u64 dvco_calibration_max;
+    };
+
+    struct CpuCvbTable {
+        u64 socType;
+        CvbCpuDfllData dfllData;
+        u64 padding[3];
+        u64 unk;
+        u32 tune_high_min_millivolts;
+        u32 tune_high_margin_millivolts;
+        u32 vmin;
+        u32 padding_1[3];
+        u32 pll_min_millivolts;
+        u32 vmax;
+        u32 unkScale;
+        u32 speedoScale;
+        u32 voltageScale;
+        u32 zero;
+        cvb_entry_t cvb_entry[32];
+    };
+    */
+
     struct __attribute__((packed)) div_nmp {
         u8 divn_shift;
         u8 divn_width;

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv_erista.cpp

@@ -322,7 +322,16 @@ namespace ams::ldr::hoc::pcv::erista {
         da_covers |= (w_cover << 16);
         table->burst_mc_regs.mc_emem_arb_da_covers = da_covers;
 
-        table->burst_mc_regs.mc_emem_arb_misc0 = (table->burst_mc_regs.mc_emem_arb_misc0 & 0xFFE08000) | (table->burst_mc_regs.mc_emem_arb_timing_rc + 1);
+        constexpr u32 AtomsPerDvfsPulse             = 0x7;
+        constexpr u32 McEmcSameFreq                 = 0x0;
+        constexpr u32 ExpiringSoonSlackThreshold    = 0xC; /* 0xC? */
+        const     u32 PriorityInversionIsoThreshold = GET_CYCLE_CEIL(7.5);
+        constexpr u32 EmcReqB2bXfer                 = 0x0;
+        const     u32 PriorityInversionThreshold    = GET_CYCLE_CEIL(22.5);
+        const     u32 Bc2aaHoldoffThreshold         = table->burst_mc_regs.mc_emem_arb_timing_rc + 1;
+
+        const u32 mc_emem_arb_misc0 = (AtomsPerDvfsPulse << 28) | (McEmcSameFreq << 27) | (ExpiringSoonSlackThreshold << 21) | (PriorityInversionIsoThreshold << 16) | (EmcReqB2bXfer << 15) | (PriorityInversionThreshold << 8) | (Bc2aaHoldoffThreshold << 0);
+        table->burst_mc_regs.mc_emem_arb_misc0 = mc_emem_arb_misc0;
 
         u32 mpcorer_ptsa_rate = MIN(static_cast<u32>(227), (table->rate_khz / 1600000) * 208);
         table->la_scale_regs.mc_mll_mpcorer_ptsa_rate = mpcorer_ptsa_rate;
@@ -363,12 +372,16 @@ namespace ams::ldr::hoc::pcv::erista {
         table->la_scale_regs.mc_latency_allowance_hc_1      =              (table->la_scale_regs.mc_latency_allowance_hc_1      & Mask2)    |  allowance1;
         table->la_scale_regs.mc_latency_allowance_vi2_0     =              (table->la_scale_regs.mc_latency_allowance_vi2_0     & Mask2)    |  allowance1;
 
-        table->dram_timings.t_rp  = tRFCpb;
-        table->dram_timings.t_rfc = tRFCab;
-        table->emc_cfg_2          = 0x11083D;
-        table->min_volt           = std::clamp(900 + (C.emcDvbShift * 25), 900, 1050);
+        table->dram_timings.t_rp  = tRP_values[0];
+        const u32 tRFCabStock     = tRFC_values[0] * 2;
+        table->dram_timings.t_rfc = tRFCabStock;
+
+        table->emc_mrw2        = (table->emc_mrw2 & ~0xFFu) | static_cast<u32>(mrw2);
+        table->emc_mrw         = (table->emc_mrw  & ~0x70u) | 0x40; /* nWR */
+        table->emc_cfg_2       = 0x11083D;
+        table->min_volt        = std::clamp(900 + (C.emcDvbShift * 25), 900, 1050);
     }
-    
+
     /* TODO: Template this */
     Result VerifyMtcTable(EristaMtcTable *tableStart, u32 expectedFreq) {
         R_UNLESS(tableStart->rate_khz == expectedFreq,  ldr::ResultInvalidMtcTable());
@@ -690,8 +703,6 @@ namespace ams::ldr::hoc::pcv::erista {
             }
         }
 
-        // ViewLog();
-
         for (auto &entry : patches) {
             LOGGING("%s Count: %zu\n", entry.description, entry.patched_count);
             if (R_FAILED(entry.CheckResult())) {

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv_erista.hpp

@@ -140,7 +140,7 @@ namespace ams::ldr::hoc::pcv::erista {
         MtcTableIndex index;
     };
 
-   /* TODO: Test 6gb and 8gb. */
+    /* TODO: Test 6gb and 8gb. */
     const inline MtcDramIndex mtcIndexTable[] = {
         { ICOSA_4GB_SAMSUNG_K4F6E304HB_MGCH,        T210SdevEmcDvfsTableS4gb01, },
         { ICOSA_4GB_MICRON_MT53B512M32D2NP_062_WTC, T210SdevEmcDvfsTableS4gb01, },

Source/Atmosphere/stratosphere/loader/source/oc/pcv/pcv_mariko.cpp

@@ -488,7 +488,18 @@ namespace ams::ldr::hoc::pcv::mariko {
         da_covers |= (w_cover << 16);
         table->burst_mc_regs.mc_emem_arb_da_covers = da_covers;
 
-        table->burst_mc_regs.mc_emem_arb_misc0 = (table->burst_mc_regs.mc_emem_arb_misc0 & 0xFFE08000) | (table->burst_mc_regs.mc_emem_arb_timing_rc + 1);
+        constexpr u32 AtomsPerDvfsPulse             = 0x7;
+        constexpr u32 McEmcSameFreq                 = 0x0;
+        /* On certain frequencies (2966, 3100, 3133 and 3200 MHz), ExpiringSoonSlackThreshold has a value of 0x12. */
+        /* But 0x13 is good enough for now. */
+        constexpr u32 ExpiringSoonSlackThreshold    = 0x13;
+        const     u32 PriorityInversionIsoThreshold = GET_CYCLE_CEIL(7.5);
+        constexpr u32 EmcReqB2bXfer                 = 0x0;
+        const     u32 PriorityInversionThreshold    = GET_CYCLE_CEIL(22.5);
+        const     u32 Bc2aaHoldoffThreshold         = table->burst_mc_regs.mc_emem_arb_timing_rc + 1;
+
+        const u32 mc_emem_arb_misc0 = (AtomsPerDvfsPulse << 28) | (McEmcSameFreq << 27) | (ExpiringSoonSlackThreshold << 21) | (PriorityInversionIsoThreshold << 16) | (EmcReqB2bXfer << 15) | (PriorityInversionThreshold << 8) | (Bc2aaHoldoffThreshold << 0);
+        table->burst_mc_regs.mc_emem_arb_misc0 = mc_emem_arb_misc0;
 
         table->la_scale_regs.mc_mll_mpcorer_ptsa_rate = 0x115;
 
@@ -530,11 +541,13 @@ namespace ams::ldr::hoc::pcv::mariko {
         table->la_scale_regs.mc_latency_allowance_hc_1      =              (table->la_scale_regs.mc_latency_allowance_hc_1      & Mask2)    |  allowance1;
         table->la_scale_regs.mc_latency_allowance_vi2_0     =              (table->la_scale_regs.mc_latency_allowance_vi2_0     & Mask2)    |  allowance1;
 
-        table->dram_timings.t_rp  = tRFCpb;
-        table->dram_timings.t_rfc = tRFCab;
+        table->dram_timings.t_rp  = tRP_values[0];
+        const u32 tRFCabStock     = tRFC_values[0] * 2;
+        table->dram_timings.t_rfc = tRFCabStock;
 
         table->dram_timings.rl = RL;
         table->emc_mrw2        = (table->emc_mrw2 & ~0xFFu) | static_cast<u32>(mrw2);
+        table->emc_mrw         = (table->emc_mrw  & ~0x70u) | 0x40; /* nWR */
         table->emc_cfg_2       = 0x11083D;
     }
 
@@ -876,6 +889,8 @@ namespace ams::ldr::hoc::pcv::mariko {
             { 3133000, { DVB_OC(1025, 1000,  975, 23) }, },
             { 3166000, { DVB_OC(1037, 1012,  987, 24) }, },
             { 3200000, { DVB_OC(1050, 1025, 1000, 25) }, },
+            { 3266000, { DVB_OC(1075, 1050, 1025, 26) }, },
+            { 3333000, { DVB_OC(1100, 1075, 1050, 27) }, },
             {     ~0u, {                              }, },
         };
         #undef DVB

Source/hoc-clk/build.sh

@@ -40,5 +40,6 @@ cp -vf  "$ROOT_DIR/assets/hoc.rgba" "$DIST_DIR/config/ultrahand/assets/notificat
 
 echo
 echo "*** Copying lang ***"
-cp -vr "$ROOT_DIR/overlay/lang/" "$DIST_DIR/config/horizon-oc/lang/"
+mkdir -p "$DIST_DIR/config/horizon-oc/lang"
+cp -vr "$ROOT_DIR/overlay/lang/." "$DIST_DIR/config/horizon-oc/lang/"
 echo

Source/hoc-clk/common/include/hocclk/client/ipc.h

@@ -12,9 +12,9 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- * 
+ *
  */
- 
+
 /* --------------------------------------------------------------------------
  * "THE BEER-WARE LICENSE" (Revision 42):
  * <p-sam@d3vs.net>, <natinusala@gmail.com>, <m4x@m4xw.net>
@@ -50,6 +50,7 @@ Result hocclkIpcSetConfigValues(HocClkConfigValueList* configValues);
 Result hocclkIpcGetFreqList(HocClkModule module, u32* list, u32 maxCount, u32* outCount);
 Result hocClkIpcSetKipData();
 Result hocClkIpcGetKipData();
+Result hocClkIpcRequestGpuVoltage(u32 voltage, u32 hz);
 
 static inline Result hocclkIpcRemoveOverride(HocClkModule module)
 {

Source/hoc-clk/common/include/hocclk/clock_manager.h

@@ -81,9 +81,10 @@ typedef struct {
     u16 resolutionHeight;
     u8 custRev;
     u16 kipVersion;
+    bool isKipLoaded;
 
     // Reserved for future use
-    u8 reserved[0x35B];
+    u8 reserved[0x35A];
 } HocClkContext;
 
 typedef struct

Source/hoc-clk/common/include/hocclk/config.h

@@ -70,6 +70,7 @@ typedef enum {
 
     HocClkConfigValue_AulaDisplayColorPreset,
     HocClkConfigValue_MarikoMiddleFreqs,
+    HocClkConfigValue_LiveGpuVoltage,
 
     HocClkConfigValue_AutoRAMCPUOverclock,
     HocClkConfigValue_AutoRamCpuCpuOCFreq,
@@ -223,6 +224,8 @@ typedef enum {
     KipConfigValue_g_soc_volt_3133000,
     KipConfigValue_g_soc_volt_3166000,
     KipConfigValue_g_soc_volt_3200000,
+    KipConfigValue_g_soc_volt_3266000,
+    KipConfigValue_g_soc_volt_3333000,
 
     KipConfigValue_t6_tRTW_fine_tune,
     KipConfigValue_t7_tWTR_fine_tune,
@@ -315,6 +318,9 @@ static inline const char* hocclkFormatConfigValue(HocClkConfigValue val, bool pr
         case HocClkConfigValue_MarikoMiddleFreqs:
             return pretty ? "Mariko Middle Clocks" : "mariko_middle_freqs";
 
+        case HocClkConfigValue_LiveGpuVoltage:
+            return pretty ? "GPU Voltage Request" : "gpu_voltage_request";
+
         case HocClkConfigValue_AutoRAMCPUOverclock:
             return pretty ? "Auto High RAM CPU OC" : "auto_high_ram_cpu_oc";
         case HocClkConfigValue_AutoRamCpuCpuOCFreq:
@@ -538,6 +544,8 @@ static inline const char* hocclkFormatConfigValue(HocClkConfigValue val, bool pr
         case KipConfigValue_g_soc_volt_3133000: return pretty ? "Mariko SOC Volt 3133 MHz" : "g_soc_volt_3133000";
         case KipConfigValue_g_soc_volt_3166000: return pretty ? "Mariko SOC Volt 3166 MHz" : "g_soc_volt_3166000";
         case KipConfigValue_g_soc_volt_3200000: return pretty ? "Mariko SOC Volt 3200 MHz" : "g_soc_volt_3200000";
+        case KipConfigValue_g_soc_volt_3266000: return pretty ? "Mariko SOC Volt 3266 MHz" : "g_soc_volt_3266000";
+        case KipConfigValue_g_soc_volt_3333000: return pretty ? "Mariko SOC Volt 3333 MHz" : "g_soc_volt_3333000";
 
         case KipCrc32:
             return pretty ? "CRC32" : "crc32";
@@ -568,6 +576,7 @@ static inline uint64_t hocclkDefaultConfigValue(HocClkConfigValue val)
         case HocClkConfigValue_GPUSchedulingMethod:
         case HocClkConfigValue_MemoryFrequencyMeasurementMode:
         case HocClkConfigValue_MarikoMiddleFreqs:
+        case HocClkConfigValue_LiveGpuVoltage:
             return 0ULL;
         case HocClkConfigValue_RamDisplayUnit:
             return (uint64_t)RamDisplayUnit_MHz;
@@ -625,6 +634,7 @@ static inline uint64_t hocclkValidConfigValue(HocClkConfigValue val, uint64_t in
         case HocClkConfigValue_LiveCpuUv:
         case HocClkConfigValue_GPUSchedulingMethod:
         case HocClkConfigValue_MarikoMiddleFreqs:
+        case HocClkConfigValue_LiveGpuVoltage:
         case HocClkConfigValue_AutoRAMCPUOverclock:
             return (input & 0x1) == input;
 
@@ -759,6 +769,8 @@ static inline uint64_t hocclkValidConfigValue(HocClkConfigValue val, uint64_t in
         case KipConfigValue_g_soc_volt_3133000:
         case KipConfigValue_g_soc_volt_3166000:
         case KipConfigValue_g_soc_volt_3200000:
+        case KipConfigValue_g_soc_volt_3266000:
+        case KipConfigValue_g_soc_volt_3333000:
         case KipConfigValue_eristaCpuVmin:
         case KipConfigValue_eristaCpuUnlock:
         case KipConfigValue_t6_tRTW_fine_tune:

Source/hoc-clk/common/include/hocclk/ipc.h

@@ -12,9 +12,9 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- * 
+ *
  */
- 
+
 /* --------------------------------------------------------------------------
  * "THE BEER-WARE LICENSE" (Revision 42):
  * <p-sam@d3vs.net>, <natinusala@gmail.com>, <m4x@m4xw.net>
@@ -50,9 +50,9 @@ enum HocClkIpcCmd
     HocClkIpcCmd_GetFreqList = 11,
     HocClkIpcCmd_SetKipData = 12,
     HocClkIpcCmd_GetKipData = 13,
+    HocClkIpcCmd_RequestGpuVoltage = 14,
 };
 
-
 typedef struct
 {
     uint64_t tid;
@@ -69,4 +69,9 @@ typedef struct
 {
     HocClkModule module;
     uint32_t maxCount;
-} HocClkIpc_GetFreqList_Args;
+} HocClkIpc_GetFreqList_Args;
+
+typedef struct {
+    u32 voltage;
+    u32 hz;
+} HocClkIpc_RequestGpuVoltage_Args;

Source/hoc-clk/common/src/client/ipc.c

@@ -12,9 +12,9 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- * 
+ *
  */
- 
+
 /* --------------------------------------------------------------------------
  * "THE BEER-WARE LICENSE" (Revision 42):
  * <p-sam@d3vs.net>, <natinusala@gmail.com>, <m4x@m4xw.net>
@@ -166,4 +166,13 @@ Result hocClkIpcGetKipData()
 {
     u32 temp = 0;
     return serviceDispatchIn(&g_hocclkSrv, HocClkIpcCmd_GetKipData, temp);
-}
+}
+
+Result hocClkIpcRequestGpuVoltage(u32 voltage, u32 hz) {
+    const HocClkIpc_RequestGpuVoltage_Args args = {
+        .voltage = voltage,
+        .hz = hz,
+    };
+
+    return serviceDispatchIn(&g_hocclkSrv, HocClkIpcCmd_RequestGpuVoltage, args);
+}

Source/hoc-clk/overlay/Makefile

@@ -39,7 +39,7 @@ include ${TOPDIR}/lib/libultrahand/ultrahand.mk
 # version control constants
 #---------------------------------------------------------------------------------
 #TARGET_VERSION	:= $(shell git describe --dirty --always --tags)
-APP_VERSION		:= 2.4.2 # ensure to set KIP_VERSION and CUST_REV in sysmodule Makefile when updating this
+APP_VERSION		:= 2.5.0 # ensure to set KIP_VERSION and CUST_REV in sysmodule Makefile when updating this
 TARGET_VERSION := $(APP_VERSION)
 
 #---------------------------------------------------------------------------------
@@ -49,7 +49,7 @@ DEFINES := -DDISABLE_IPC -DTARGET="\"$(TARGET)\"" -DTARGET_VERSION="\"$(TARGET_V
 
 ARCH	:=	-march=armv8-a+crc+crypto -mtune=cortex-a57 -mtp=soft -fPIE
 
-CFLAGS	:=	-O2 -Wall -flto -fdata-sections -ffunction-sections -fno-rtti -fno-common \
+CFLAGS	:=	-Os -Wall -flto -fdata-sections -ffunction-sections -fno-rtti -fno-common \
 			$(ARCH) $(DEFINES)
 
 CFLAGS	+=	$(INCLUDE) -D__SWITCH__

Source/hoc-clk/overlay/lang/ru.json

@@ -5,6 +5,7 @@
     "Not Installed": "Не установлено",
     "Default": "По умолчанию",
     "Do Not Override": "Не менять",
+    "No Override": "Не менять",
     "Do not override": "Не менять",
     "Disabled": "Отключено",
     "Enabled": "Включено",
@@ -22,6 +23,7 @@
     "  Reset": " Сброс",
     "Settings": "Настройки",
     "About": "Сведения",
+    "Updates": "Обновления",
     "Credits": "Благодарности",
 
     "Application changed\\n\\n": "Приложение изменено\\n\\n",
@@ -49,28 +51,36 @@
     "Experimental": "Экспериментальный",
 
     " Settings marked in blue": "Настройки помеченные синим",
-    "don't require a reboot to apply!": "Синие настройки применяются сразу!",
+    "don't require a reboot to apply!": "не требуют перезагрузки для применения!",
     "You can also press  to show": "Нажмите  для просмотра",
     "information about each setting.": "информацию о каждом параметре.",
 
     " Experimental Settings are incomplete ": "Экспериментальные настройки не закончены",
-    "and may not work correctly or at all!": "Экспериментальные настройки могут не работать!",
+    "and may not work correctly or at all!": "и могут не работать правильно или вообще!",
     "Here be dragons!": "Здесь будут драконы!",
 
     "RAM Voltage Display Mode": "Показ вольтажа RAM",
     "RAM Display Unit": "Показ единицы измерения RAM",
     "Polling Interval": "Интервал опроса",
+    "Enable Experimental Settings": "Экспериментальные настройки",
 
+    "Mariko Middle Clocks": "Средние частоты Mariko",
+    "Live CPU Undervolt": "Андервольт CPU в реальном времени",
     "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU",
     "GPU Scheduling Override": "Перезапись планировщика",
-    "GPU Boot Volt": "Напряжение загрузки GPU",
-    "GPU Boot Voltage": "Напряжение загрузки GPU",
+    "GPU Boot Volt": "Вольтаж GPU при загрузке",
+    "GPU Boot Voltage": "Вольтаж GPU при загрузке",
     "Memory Frequency Measurement Mode": "Режим измерения частоты RAM",
-    " Overriding the charge current": "Перезапись зарядного тока может",
-    "can be dangerous and may cause": "Перезапись зарядного тока может",
-    "damage to your battery or charger!": "повреждить аккумулятор или зарядку!",
+    " Overriding the charge current": "Изменение зарядного тока",
+    "can be dangerous and may cause": "может быть опасным и может",
+    "damage to your battery or charger!": "повредить аккумулятор или зарядку!",
+    " Overriding the input current": "Изменение входного тока",
+    "limit increases power draw from": "повышает потребление от зарядки",
+    "your charger. And board stress ": "и вызывает напряжение на плате.",
+    "use 1500mA max.": "Используйте максимум 1500 мА.",
+    "Input Current Limit Override": "Перезапись лимита входного тока",
     "Charge Current Override": "Перезапись зарядного тока",
-    "Display Color Preset": "Цветовой пресет",
+    "Display Color Preset": "Пресет цвета дисплея",
     "Basic": "Базовый",
     "Saturated": "Насыщенный",
     "Washed": "Бледный",
@@ -79,17 +89,20 @@
 
     "CPU Governor Minimum Frequency": "Минимальная частота говернора CPU",
     " Usage of unsafe display": "Использование не безопасной",
-    "refresh rates may cause stress": "Не безопасная частота",
-    "or damage to your display! ": "может повредить ваш экран",
+    "refresh rates may cause stress": "частоты обновления экрана",
+    "or damage to your display! ": "может повредить ваш экран!",
     "Proceed at your own risk!": "Действуйте на свой страх и риск!",
-    "Max Handheld Display": "Макс. дисплей портатива",
+    "Display Refresh Rate Changing": "Изменение герцовки экрана",
     "Max Handheld Display Hz": "Макс. в портативе",
     "Display Clock": "Частота экрана",
-    " Adjust the display voltage": "Настройте напряжение экрана",
-    "with caution to avoid damage": "с осторожностью во избежание повреждений",
+    " Adjust the display voltage": "Настраивайте вольтаж экрана",
+    "with caution to avoid damage": "с осторожностью во избежание",
     "to your display panel! ": "повреждений экрана!",
-    "Display Voltage": "Напряжение экрана",
+    "Display Voltage": "Вольтаж экрана",
 
+    
+    "Uncapped Clocks": "Максимальные частоты",
+    "Thermal Throttle": "Троттлинг",
     "Thermal Throttle Limit": "Предел троттлинга",
     "Official Rating": "Официальный рейтинг",
     "TDP Threshold": "Порог TDP",
@@ -106,6 +119,7 @@
     "Ram Max Clock": "Макс. частота",
     "RAM Latency Editor": "Редактор задержек",
     "RAM Timing Reductions": "Настройка таймингов",
+    "SOC Voltage Table": "Таблица вольтажей SoC",
     "Memory Timings": "Тайминги RAM",
     "Advanced": "Расширенные",
     "t6 tRTW Fine Tune": "Точная настройка t6 tRTW",
@@ -125,6 +139,10 @@
     "JEDEC.": "JEDEC.",
 
     "CPU Boost Clock": "Частота буста",
+    "Auto CPU RAM OC": "Буст CPU → Разг. RAM",
+    "Auto CPU RAM OC CPU clock": "Буст CPU: частота CPU",
+    "Auto CPU RAM OC Threshold": "Буст CPU: порог RAM",
+    "Overwrite Boost Mode": "Перезаписать буст",
     "CPU UV": "Андервольт CPU",
     "CPU Unlock": "Разблокировка CPU",
     "CPU VMIN": "Мин. вольтаж",
@@ -137,9 +155,11 @@
     "CPU Low VMIN": "Мин. вольт. нижних частот",
     "CPU High VMIN": "Мин. вольт. верхних частот",
 
-    "No Undervolt": "Без андервольта",
-    "SLT Table": "Таблица SLT",
-    "HiOPT Table": "Таблица HiOPT",
+    "No Undervolt": "Заводская",
+    "SLT Table": "SLT",
+    "HiOPT Table": "HiOPT",
+    "HiOPT- 15mV": "HiOPT -15мВ",
+    "High UV Table": "High UV",
     "GPU Undervolt Table": "Таблица андервольта",
     "GPU Minimum Voltage": "Мин. вольтаж",
     "Calculate GPU Vmin": "Вычисление мин. вольтаж",
@@ -154,14 +174,14 @@
     "96.6% limit": "≤96,6%",
     "99.7% limit": "≤99,7%",
     " Setting GPU Clocks past": "Установка частот GPU выше",
-    "1228MHz without a proper undervolt": "Установка частот GPU выше 1228 МГц",
-    "can cause degradation or damage": "без хорошего андервольта может",
-    "to your console!": "повредить вашу консоль!",
+    "1228MHz without a proper undervolt": "1228 МГц без хорошего андервольта",
+    "can cause degradation or damage": "может вызвать деградацию железа",
+    "to your console!": "или повредить вашу консоль!",
     "1075MHz without UV, 1152MHz on SLT": "1075 МГц без UV, 1152 МГц на SLT",
-    "or 1228MHz on HiOPT can cause ": "или 1228 МГц на HiOPT может привести к",
-    "permanent damage to your Switch!": "постоянному повреждению вашей Switch!",
+    "or 1228MHz on HiOPT can cause ": "или 1228 МГц на HiOPT может вызвать",
+    "permanent damage to your Switch!": "деградацию или повредить консоль!",
     "921MHz without UV and 960MHz on": "921 МГц без UV и 960 МГц на",
-    "SLT or HiOPT can cause ": "SLT или HiOPT могут привести к",
+    "SLT or HiOPT can cause ": "SLT или HiOPT могут вызвать",
 
     "Default (Mariko)": "По умолчанию (M)",
     "Default (Erista)": "По умолчанию (E)",
@@ -169,9 +189,9 @@
     "Safe Max (Mariko)": "Сейф Макс (M)",
     "Safe Max (Erista)": "Сейф Макс (E)",
 
-    "Voltages": "Напряжения",
-    "RAM Voltage:": "Напряжение RAM:",
-    "Display Voltage:": "Напряжение дисплея:",
+    "Voltages": "Вольтажи",
+    "RAM Voltage:": "Вольтаж RAM:",
+    "Display Voltage:": "Вольтаж дисплея:",
     "Temperatures": "Температуры",
     "PLLX Temp:": "PLLX Темп.:",
     "AOTAG Temp:": "AOTAG Темп.:",
@@ -183,10 +203,10 @@
     "Not Patched": "Не пропатчено",
     "Invalid": "Недействительно",
     "RAM Bandwidth": "Пропускная способность RAM",
-    "RAM BW (Peak):": "Полоса RAM (Макс.):",
-    "RAM BW (All):": "Полоса RAM (Всего):",
-    "RAM BW (CPU):": "Полоса RAM (CPU):",
-    "RAM BW (GPU):": "Полоса RAM (GPU):",
+    "RAM BW (Peak):": "RAM BW (Макс.):",
+    "RAM BW (All):": "RAM BW (Всего):",
+    "RAM BW (CPU):": "RAM BW (CPU):",
+    "RAM BW (GPU):": "RAM BW (GPU):",
     "Hardware Info": "Информация об оборудовании",
     "Console Type:": "Тип консоли:",
     "Speedo:": "Speedo:",
@@ -196,7 +216,7 @@
     "sys-dock status:": "Статус sys-dock:",
     "SaltyNX status:": "Статус SaltyNX:",
     "RR Display status:": "Статус RR Display:",
-    "Wafer Position:": "Wafer Position:",
+    "Wafer Position:": "Расположение на «Wafer»:",
     "IDDQ:": "IDDQ:",
     "Module: ": "Module:",
     "Board": "Board",

Source/hoc-clk/overlay/lang/zh-cn.json

@@ -5,28 +5,31 @@
     "Not Installed": "未安装",
     "Default": "默认",
     "Do Not Override": "不修改",
+	"No Override": "不修改",
     "Do not override": "不修改",
-    "Disabled": "已禁用",
-    "Enabled": "已启用",
-    "Enabled (Default)": "已启用 (默认)",
+	"Auto": "自动",
+    "Disabled": "禁用",
+    "Enabled": "启用",
+    "Enabled (Default)": "启用 (默认)",
     "Enable": "启用",
-    "Fatal error": "致命错误",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接到 hoc-clk 系统模块。\\n\\n",
+    "Fatal error": "严重错误",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接hoc-clk系统模块。\\n\\n",
     "Please make sure everything is\\n\\n": "请确保所有内容均已\\n\\n",
-    "correctly installed and enabled.": "正确安装并启用。",
+    "correctly installed and enabled.": "正确安装且启用。",
 
     "Edit App Profile": "编辑应用配置",
     "Edit Global Profile": "编辑全局配置",
     "Temporary Overrides": "临时配置",
-    "Temporary Overrides ": "临时配置 ",
-    "  Reset": "  重置",
+    "Temporary Overrides ": "临时配置",
+    "  Reset": "  重置",
     "Settings": "设置",
     "About": "关于",
+    "Updates": "更新菜单",
     "Credits": "致谢",
 
-    "Application changed\\n\\n": "应用已变更\\n\\n",
-    "The running application changed\\n\\n": "正在运行的应用已变更\\n\\n",
-    "while editing was going on.": "编辑过程中发生变更。",
+    "Application changed\\n\\n": "应用出现变更\\n\\n",
+    "The running application changed\\n\\n": "当前应用在编辑过程中\\n\\n",
+    "while editing was going on.": "出现了变更。",
 
     "Sleep Mode": "睡眠模式",
     "Stock": "原厂默认",
@@ -35,176 +38,231 @@
     "Safe Max": "安全最大值",
     "Unsafe Max": "危险最大值",
     "Absolute Max": "绝对最大值",
-    "Handheld Safe Max": "掌机模式安全最大值",
+    "Handheld Safe Max": "掌机安全最大值",
 
     "General Settings": "通用设置",
     "Governor Settings": "调频器设置",
     "Safety Settings": "安全设置",
-    "Save KIP Settings": "保存 KIP 设置",
+    "Save KIP Settings": "保存KIP设置",
     "RAM Settings": "内存设置",
-    "CPU Settings": "CPU 设置",
-    "GPU Settings": "GPU 设置",
-    "Display Settings": "显示设置",
+    "CPU Settings": "CPU设置",
+    "GPU Settings": "GPU设置",
+    "Display Settings": "屏幕设置",
     "Experimental Settings": "实验性设置",
     "Experimental": "实验性功能",
 
-    " Settings marked in blue": "蓝色标注的设置",
-    "don't require a reboot to apply!": "无需重启即可应用！",
-    "You can also press  to show": "也可按  查看",
-    "information about each setting.": "每项设置的说明。",
+    " Settings marked in blue": "蓝色的设置更改后可立即生效，",
+    "don't require a reboot to apply!": "无需重启主机。",
+    "You can also press  to show": "按可以查看每项设置的",
+    "information about each setting.": "详细说明(英文)。",
 
-    " Experimental Settings are incomplete ": "实验性设置尚未完成",
-    "and may not work correctly or at all!": "且可能无法正常工作！",
-    "Here be dragons!": "此处有险！",
+    " Experimental Settings are incomplete ": "实验性设置尚未正式完成，",
+    "and may not work correctly or at all!": "可能导致死机崩溃等意外后果！",
+    "Here be dragons!": "风险自负！",
 
     "RAM Voltage Display Mode": "内存电压显示模式",
     "RAM Display Unit": "内存显示单位",
-    "Polling Interval": "刷新间隔",
+    "Polling Interval": "轮询间隔",
+    "Enable Experimental Settings": "启用实验性设置",
 
-    "GPU Scheduling Override Method": "GPU 调度覆盖方式",
-    "GPU Scheduling Override": "GPU 调度修改",
-    "GPU Boot Volt": "GPU 启动电压",
-    "GPU Boot Voltage": "GPU 启动电压",
+    "Mariko Middle Clocks": "启用GPU中频",
+	"Live CPU Undervolt": "实时CPU降压",
+    "GPU Scheduling Override Method": "GPU调度修改方式",
+    "GPU Scheduling Override": "GPU调度修改",
+    "GPU Boot Volt": "GPU启动电压",
+    "GPU Boot Voltage": "GPU启动电压",
     "Memory Frequency Measurement Mode": "内存频率测量模式",
-    " Overriding the charge current": "修改充电电流",
-    "can be dangerous and may cause": "存在风险，可能导致",
-    "damage to your battery or charger!": "电池或充电器损坏！",
-    "Charge Current Override": "充电电流修改",
-    "Display Color Preset": "显示颜色预设",
+    " Overriding the charge current": "修改电池充电电流",
+    "can be dangerous and may cause": "存在一定风险，可能会伤电池",
+    "damage to your battery or charger!": "或充电器！",
+    "Charge Current Override": "修改充电电流",
+    " Overriding the input current": "修改输入电流可能会增加主机",
+    "limit increases power draw from": "从充电器获取的电流。",
+    "your charger. And board stress ": "主板本身最大电流为",
+    "use 1500mA max.": "1500mA。",
+    "Input Current Limit Override": "修改主机输入电流",
+    "Display Color Preset": "屏幕滤镜",
     "Basic": "基础",
     "Saturated": "饱和",
     "Washed": "淡色",
     "Natural": "自然",
     "Vivid": "鲜艳",
 
-    "CPU Governor Minimum Frequency": "CPU 调频器最低频率",
-    " Usage of unsafe display": "不安全的显示屏",
-    "refresh rates may cause stress": "刷新率可能会对",
-    "or damage to your display! ": "显示屏造成压力或损坏！ ",
-    "Proceed at your own risk!": "操作风险自负！",
-    "Max Handheld Display": "掌机模式最大显示率",
-    "Max Handheld Display Hz": "掌机最大显示率 Hz",
-    "Display Clock": "显示时钟",
-    " Adjust the display voltage": "调整显示电压",
+    "CPU Governor Minimum Frequency": "CPU调频器最低频率",
+    " Usage of unsafe display": "调整屏幕刷新率",
+    "refresh rates may cause stress": "可能会伤屏幕，",
+    "or damage to your display! ": "乃至造成损失！",
+    "Proceed at your own risk!": "风险自负！",
+	"Display Refresh Rate Changing": "修改屏幕刷新率",
+    "Max Handheld Display": "掌机最大刷新率",
+    "Max Handheld Display Hz": "掌机最大刷新率",
+    "Display Clock": "屏幕刷新率",
+    " Adjust the display voltage": "请谨慎调整显示电压",
     "with caution to avoid damage": "请谨慎以避免损坏",
     "to your display panel! ": "显示屏面板！",
-    "Display Voltage": "显示电压",
+    "Display Voltage": "屏幕电压",
 
-    "Thermal Throttle Limit": "温控设置",
+    "Uncapped Clocks": "解锁频率",
+    "Thermal Throttle": "过热保护",
+    "Thermal Throttle Limit": "过热保护温度",
     "Official Rating": "官方额定值",
-    "TDP Threshold": "TDP 阈值",
+    "TDP Threshold": "TDP阈值",
     "Power": "电源",
     "HP Mode": "高性能模式",
 
-    "DVB Shift": "DVB 偏移",
-    "SoC Max Volt": "SoC 最大电压",
+    "DVB Shift": "DVB偏移",
+    "SoC Max Volt": "SoC最高电压",
     "Step Mode": "步进模式",
-    "RAM VDD2 Voltage": "内存 VDD2 电压",
-    "RAM VDDQ Voltage": "内存 VDDQ 电压",
+    "RAM VDD2 Voltage": "内存VDD2电压",
+    "RAM VDDQ Voltage": "内存VDDQ电压",
     "Voltage": "电压",
-    "RAM Frequency Editor": "内存频率编辑器",
-    "Ram Max Clock": "内存最大频率",
-    "RAM Latency Editor": "内存延迟编辑器",
+    "RAM Frequency Editor": "内存频率编辑",
+    "Ram Max Clock": "内存最高频率",
+    "RAM Latency Editor": "内存延迟编辑",
     "RAM Timing Reductions": "内存时序优化",
+    "SOC Voltage Table": "自定义SOC电压",
+	"SOC Custom Voltages": "自定义SOC电压",
     "Memory Timings": "内存时序",
     "Advanced": "高级",
-    "t6 tRTW Fine Tune": "t6 tRTW 微调",
-    "tRTW Fine Tune": "tRTW 微调",
-    "t7 tWTR Fine Tune": "t7 tWTR 微调",
-    "tWTR Fine Tune": "tWTR 微调",
+    "t6 tRTW Fine Tune": "t6 tRTW微调",
+    "tRTW Fine Tune": "tRTW微调",
+    "t7 tWTR Fine Tune": "t7 tWTR微调",
+    "tWTR Fine Tune": "tWTR微调",
     "Memory Latencies": "内存延迟",
     "Read Latency": "读取延迟",
     "Write Latency": "写入延迟",
-    "High speedo needed!": "需要高 Speedo 配置！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极限 Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极限 Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极限 Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极端 Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极端 Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极端 Speedo/PLL)",
-    "JEDEC.": "JEDEC 标准。",
+	"Latency Graph": "延迟可视化图",
+	"Latency Max": "延迟最高频率"
+	"1333 Latency Max": "1333延迟最高频率",
+	"1600 Latency Max": "1600延迟最高频率",
+	"1866 Latency Max": "1866延迟最高频率",
+	"2133 Latency Max": "2133延迟最高频率",
+	"Read": "读取",
+	"Write": "写入",
+	"Same": "相同"
+    "High speedo needed!": "需要高体质！",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极高体质)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极高体质)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极高体质)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极限体质)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极限体质)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极限体质)",
+    "JEDEC.": "JEDEC",
 
-    "CPU Boost Clock": "CPU 超频频率",
-    "CPU UV": "CPU 降压",
-    "CPU Unlock": "CPU 解锁",
-    "CPU VMIN": "CPU 最低电压",
-    "CPU Max Voltage": "CPU 最大电压",
-    "CPU Max Clock": "CPU 最大频率",
-    "Extreme UV Table": "极限降压表",
-    "CPU UV Table": "CPU 降压表",
-    "CPU Low UV": "CPU 低压降压",
-    "CPU High UV": "CPU 高压降压",
-    "CPU Low VMIN": "CPU 低压最低电压",
-    "CPU High VMIN": "CPU 高压最低电压",
+    "CPU Boost Clock": "CPU加速频率",
+    "Auto CPU RAM OC": "高内存频率自动提频CPU",
+    "Auto CPU RAM OC CPU clock": "自动提频CPU频率",
+    "Auto CPU RAM OC Threshold": "自动提频触发阈值",
+    "Overwrite Boost Mode": "接管系统CPU调度",
+    "CPU UV": "CPU降压",
+    "CPU Unlock": "CPU解锁",
+    "CPU VMIN": "CPU最低电压",
+    "CPU Max Voltage": "CPU最高电压",
+    "CPU Max Clock": "CPU最高频率",
+    "Extreme UV Table": "极限降压",
+    "CPU UV Table": "CPU降压模式",
+    "CPU Low UV": "CPU低频降压",
+    "CPU High UV": "CPU高频降压",
+    "CPU Low VMIN": "CPU低频最低电压",
+    "CPU High VMIN": "CPU高频最低电压",
 
-    "No Undervolt": "不降压",
-    "SLT Table": "SLT 表",
-    "HiOPT Table": "HiOPT 表",
-    "GPU Undervolt Table": "GPU 降压表",
-    "GPU Minimum Voltage": "GPU 最低电压",
-    "Calculate GPU Vmin": "计算 GPU 最低电压",
-    "GPU VMIN": "GPU 最低电压",
-    "GPU Maximum Voltage": "GPU 最大电压",
-    "GPU Voltage Offset": "GPU 电压偏移",
-    "GPU DVFS Mode": "GPU DVFS 模式",
-    "GPU DVFS Offset": "GPU DVFS 偏移",
-    "GPU Voltage Table": "GPU 电压表",
-    "GPU Custom Table (mV)": "GPU 自定义表 (mV)",
+    "No Undervolt": "无降压",
+    "SLT Table": "SLT",
+    "HiOPT Table": "HiOPT",
+	"High UV Table": "高降压",
+    "GPU Undervolt Table": "GPU降压模式",
+    "GPU Minimum Voltage": "GPU最低电压",
+    "Calculate GPU Vmin": "计算GPU最低电压",
+    "GPU VMIN": "GPU最低电压",
+    "GPU Maximum Voltage": "GPU最高电压",
+    "GPU Voltage Offset": "GPU电压偏移",
+    "GPU DVFS Mode": "GPU DVFS模式",
+    "GPU DVFS Offset": "GPU DVFS偏移",
+    "GPU Voltage Table": "自定义GPU电压",
+    "GPU Custom Table (mV)": "GPU自定义电压(mV)",
     "Official Service": "官方服务",
-    "96.6% limit": "96.6% 限制",
-    "99.7% limit": "99.7% 限制",
-    " Setting GPU Clocks past": " 将 GPU 频率设置超过",
-    "1228MHz without a proper undervolt": "没有适当降压的 1228MHz",
-    "can cause degradation or damage": "可能导致损耗或损坏",
-    "to your console!": "您的主机！",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz 无降压，SLT 表下 1152MHz",
-    "or 1228MHz on HiOPT can cause ": "或 HiOPT 表下 1228MHz 可能导致 ",
-    "permanent damage to your Switch!": "Switch 永久损坏！",
-    "921MHz without UV and 960MHz on": "921MHz 无降压，SLT/HiOPT 表下 960MHz",
-    "SLT or HiOPT can cause ": "可能导致 ",
+    "96.6% limit": "使用率最高96.6%",
+    "99.7% limit": "使用率最高99.7%",
+    " Setting GPU Clocks past": "警告:在没有适当降压",
+    "1228MHz without a proper undervolt": "的情况下将GPU频率超到",
+    "can cause degradation or damage": "1228MHz以上可能会",
+    "to your console!": "更伤主机，乃至造成损失！",
+    "1075MHz without UV, 1152MHz on SLT": "无降压1075MHz，SLT下1152MHz",
+    "or 1228MHz on HiOPT can cause ": "或HiOPT下1228MHz可能会伤主机，",
+    "permanent damage to your Switch!": "乃至造成无法挽回的损失！",
+    "921MHz without UV and 960MHz on": "无降压921MHz，SLT/HiOPT 表下 960MHz",
+    "SLT or HiOPT can cause ": "可能导致",
 
-    "Default (Mariko)": "默认 (Mariko)",
-    "Default (Erista)": "默认 (Erista)",
+    "Default (Mariko)": "默认(续航版)",
+    "Default (Erista)": "默认(初版)",
     "Rating": "额定值",
-    "Safe Max (Mariko)": "安全最大值 (Mariko)",
-    "Safe Max (Erista)": "安全最大值 (Erista)",
+    "Safe Max (Mariko)": "安全最大值(续航版)",
+    "Safe Max (Erista)": "安全最大值(初版)",
 
     "Voltages": "电压",
     "RAM Voltage:": "内存电压:",
-    "Display Voltage:": "显示电压:",
+    "Display Voltage:": "屏幕电压:",
     "Temperatures": "温度",
-    "PLLX Temp:": "PLLX 温度:",
-    "AOTAG Temp:": "AOTAG 温度:",
-    "BQ24193 Temp:": "BQ24193 温度:",
+    "PLLX Temp:": "PLLX温度:",
+    "AOTAG Temp:": "AOTAG温度:",
+    "BQ24193 Temp:": "BQ24193温度:",
     "Normal": "正常",
     "Warm": "温热",
-    "Hot": "过热",
-    "Overheat": "严重过热",
+    "Hot": "较热",
+    "Overheat": "过热",
     "Not Patched": "未修补",
     "Invalid": "无效",
     "RAM Bandwidth": "内存带宽",
-    "RAM BW (Peak):": "RAM带宽(峰值):",
-    "RAM BW (All):": "RAM带宽(全部):",
-    "RAM BW (CPU):": "RAM带宽(CPU):",
-    "RAM BW (GPU):": "RAM带宽(GPU):",
+    "RAM BW (Peak):": "内存带宽(最高):",
+    "RAM BW (All):": "内存带宽(当前):",
+    "RAM BW (CPU):": "内存带宽(CPU):",
+    "RAM BW (GPU):": "内存带宽(GPU):",
     "Hardware Info": "硬件信息",
     "Console Type:": "主机类型:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "DRAM 模块: ",
+    "Speedo:": "体质分:",
+    "DRAM Module: ": "内存颗粒: ",
     "Software Info": "软件信息",
-    "KIP version:": "KIP 版本:",
-    "sys-dock status:": "sys-dock 状态:",
-    "SaltyNX status:": "SaltyNX 状态:",
-    "RR Display status:": "RR 显示状态:",
+    "KIP version:": "KIP版本:",
+    "sys-dock status:": "sys-dock状态:",
+    "SaltyNX status:": "SaltyNX状态:",
+    "RR Display status:": "RR显示状态:",
+	"General Info": "其他信息",
     "Wafer Position:": "晶圆位置:",
     "IDDQ:": "IDDQ:",
     "Module: ": "模块: ",
+	
+	"App ID": "应用ID",
+	"Profile": "当前配置",
+	"Docked": "底座模式",
+	"Handheld": "掌机模式",
+	"PD Charger": "PD充电器",
+	"USB Charger": "USB充电器",
+	"Memory": "内存",
+	"MEM": "内存",
+	"Governor": "调频器",
     "Board": "主板",
-    "Display": "显示",
+    "Display": "屏幕",
+	"BAT": "电池",
+    "Fan": "风扇",
+    "Now": "当前",
+    "Avg": "平均",
+	"OLED": "屏幕",
+	"LCD": "屏幕"
+	
+	"Releases": "发行版本",
+	"Horizon OC + Extensions": "Horizon OC+附加包",
+	"Status": "状态",
+	"Downloading": "正在下载",
+	"Extracting": "正在解压",
+	"Download cancelled": "下载已取消",
+	"Download failed -- check network": "下载失败，请检查网络",
+	"Extraction cancelled": "解压已取消",
+	"Extraction failed -- archive may be corrupt": "解压失败，文件可能损坏",
+	"Update complete! Restart required.": "更新完成，重启生效",
 
-    "Developers": "开发者",
-    "Contributors": "贡献者",
-    "Testers": "测试者",
+    "Developers": "开发",
+    "Contributors": "贡献",
+    "Testers": "测试",
     "Translators": "翻译",
     "Special Thanks": "特别感谢",
 

Source/hoc-clk/overlay/src/ui/gui/about_gui.cpp

@@ -20,10 +20,12 @@
 #include <tesla.hpp>
 #include <string>
 #include "cat.h"
+#include "main_gui.h"
 #include "ult_ext.h"
 
 // tsl::elm::ListItem* custRevItem = NULL;
 tsl::elm::ListItem* kipVersionItem = NULL;
+tsl::elm::ListItem* kipLoadedItem = NULL;
 tsl::elm::ListItem* SpeedoItem = NULL;
 tsl::elm::ListItem* IddqItem = NULL;
 tsl::elm::ListItem* DramModule = NULL;
@@ -155,6 +157,9 @@ void AboutGui::listUI()
     kipVersionItem = new tsl::elm::ListItem("KIP version:");
     this->listElement->addItem(kipVersionItem);
 
+    kipLoadedItem = new tsl::elm::ListItem("KIP status:");
+    this->listElement->addItem(kipLoadedItem);
+
     if(!IsHoag()) {
         sysdockStatusItem =
             new tsl::elm::ListItem("sys-dock status:");
@@ -172,13 +177,18 @@ void AboutGui::listUI()
     creditsItem = new tsl::elm::ListItem("Credits");
     creditsItem->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<CreditsSubMenu>();
+            tsl::swapTo<CreditsSubMenu>();
             return true;
         }
         return false;
     });
     creditsItem->setValue(R_ARROW);
     this->listElement->addItem(creditsItem);
+
+    if (!lastItemName.empty()) {
+        this->listElement->jumpToItem(lastItemName);
+    }
+    lastItemName = "";
 }
 
 std::string AboutGui::formatRamModule() {
@@ -229,6 +239,10 @@ void AboutGui::update()
     BaseMenuGui::update();
 }
 
+std::string AboutGui::getJumpToItemName() {
+    return "About";
+}
+
 void AboutGui::refresh()
 {
     BaseMenuGui::refresh();
@@ -246,6 +260,8 @@ void AboutGui::refresh()
     // custRevItem->setValue(std::to_string(this->context->custRev));
 
     kipVersionItem->setValue(std::to_string((this->context->kipVersion / 100) % 10) + "." + std::to_string((this->context->kipVersion / 10) % 10) + "." + std::to_string( this->context->kipVersion % 10) + " (Cust Rev " + std::to_string(this->context->custRev) + ")");
+    kipLoadedItem->setValue(this->context->isKipLoaded ? "Loaded" : "Not Loaded");
+
     if(!IsHoag())
         sysdockStatusItem->setValue(this->context->isSysDockInstalled ? "Installed" : "Not Installed");
 
@@ -315,6 +331,22 @@ class CreditsSubMenu : public AboutGui {
     public:
         CreditsSubMenu() { }
 
+        bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                          HidAnalogStickState rightJoyStick) override {
+            if (keysDown & KEY_B) {
+                triggerExitFeedback();
+                lastItemName = "Credits";
+                tsl::swapTo<AboutGui>();
+                return true;
+            }
+            return false;
+        }
+
+        /* This is needed because AboutGui::Refresh() dereferences pointers that get freed after swapTo is called. */
+        void refresh() override {
+            BaseMenuGui::refresh();
+        }
+
     protected:
         ImageElement* CatImage = NULL;
         HideableCategoryHeader* CatHeader = NULL;

Source/hoc-clk/overlay/src/ui/gui/about_gui.h

@@ -27,6 +27,7 @@ class AboutGui : public BaseMenuGui
 {
 protected:
     char strings[32][32];
+    std::string getJumpToItemName() override;
 
 public:
     AboutGui();

Source/hoc-clk/overlay/src/ui/gui/app_profile_gui.cpp

@@ -290,6 +290,11 @@ public:
     GovernorProfileSubMenuGui(uint64_t appId, HocClkTitleProfileList* pList, HocClkProfile prof)
         : applicationId(appId), profileList(pList), profile(prof) {}
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        return false;
+    }
+
     void listUI() override {
         BaseMenuGui::refresh(); // get latest context
         if(!this->context)
@@ -445,8 +450,14 @@ void AppProfileGui::listUI()
     this->addProfileUI(HocClkProfile_HandheldChargingUSB);
 }
 
+std::string jumpItemString = "Edit App Profile";
+
 void AppProfileGui::changeTo(std::uint64_t applicationId)
 {
+    if (applicationId == HOCCLK_GLOBAL_PROFILE_TID) {
+        jumpItemString = "Edit Global Profile";
+    }
+
     HocClkTitleProfileList* profileList = new HocClkTitleProfileList;
     Result rc = hocclkIpcGetProfiles(applicationId, profileList);
     if(R_FAILED(rc))
@@ -456,7 +467,7 @@ void AppProfileGui::changeTo(std::uint64_t applicationId)
         return;
     }
 
-    tsl::changeTo<AppProfileGui>(applicationId, profileList);
+    tsl::swapTo<AppProfileGui>(applicationId, profileList);
 }
 
 void AppProfileGui::update()
@@ -473,4 +484,8 @@ void AppProfileGui::update()
             ""
         );
     }
+}
+
+std::string AppProfileGui::getJumpToItemName() {
+    return jumpItemString;
 }

Source/hoc-clk/overlay/src/ui/gui/app_profile_gui.h

@@ -32,6 +32,7 @@ class AppProfileGui : public BaseMenuGui {
     protected:
     std::uint64_t applicationId;
     HocClkTitleProfileList *profileList;
+    std::string getJumpToItemName() override;
     void openFreqChoiceGui(tsl::elm::ListItem *listItem, HocClkProfile profile, HocClkModule module);
     void addModuleListItem(HocClkProfile profile, HocClkModule module);
     void addModuleListItemToggle(HocClkProfile profile, HocClkModule module);

Source/hoc-clk/overlay/src/ui/gui/base_menu_gui.cpp

@@ -27,7 +27,7 @@
 #include "../format.h"
 #include "base_menu_gui.h"
 #include "fatal_gui.h"
-
+#include "main_gui.h"
 
 #define TOP_Y_OFFSET 15
 
@@ -362,3 +362,18 @@ tsl::elm::Element *BaseMenuGui::baseUI() {
 
     return list;
 }
+
+std::string BaseMenuGui::getJumpToItemName() {
+    return "";
+}
+
+bool BaseMenuGui::handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                               HidAnalogStickState rightJoyStick) {
+    if (keysDown & KEY_B) {
+        triggerExitFeedback();
+        lastItemName = this->getJumpToItemName();
+        tsl::swapTo<MainGui>();
+        return true;
+    }
+    return false;
+}

Source/hoc-clk/overlay/src/ui/gui/base_menu_gui.h

@@ -31,6 +31,7 @@
 
 class BaseMenuGui : public BaseGui {
     protected:
+        virtual std::string getJumpToItemName();
     public:
     // u8 dockedHighestAllowedRefreshRate = 60;
     HocClkContext *context;
@@ -79,6 +80,8 @@ class BaseMenuGui : public BaseGui {
     tsl::elm::Element *baseUI() override;
     void refresh() override;
     virtual void listUI() = 0;
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override;
     u16 headerHeight() const override {
         return HOC_BOX_BOTTOM + 9;
     }

Source/hoc-clk/overlay/src/ui/gui/config_info_strings.cpp

@@ -542,6 +542,15 @@ std::vector<std::string> ConfigInfoStrings(HocClkConfigValue val, bool isMariko,
                 "- Enabled: Enables GPU scheduling, 96.5% GPU max load",
                 "Default: Do not override"
             };
+        case HocClkConfigValue_LiveGpuVoltage:
+            return {
+                "Adjust GPU voltage on the fly.",
+                "Warning: unstable settings allowed.",
+                "Exception: while RAM OC is active, voltage cannot drop below stability minimum.",
+                "RAM frequency changes overwrite requested voltage.",
+                "Voltage applies globally across all frequencies.",
+                "\"Reset\" restores default or RAM-stable minimum."
+            };
         default:
             return {};
     }

Source/hoc-clk/overlay/src/ui/gui/freq_choice_gui.cpp

@@ -146,9 +146,9 @@ void FreqChoiceGui::listUI() {
 
         if (IsMariko()) {
             unsafe_cpu = this->configList->values[KipConfigValue_marikoCpuUVHigh] ? 2398 : 1964;
-            unsafe_gpu = 1229;
+            unsafe_gpu = 1383;
             danger_cpu = this->configList->values[KipConfigValue_marikoCpuUVHigh] ? 2500 : 2398;
-            danger_gpu = 1306;
+            danger_gpu = 1460;
         } else {
             unsafe_cpu = this->configList->values[KipConfigValue_eristaCpuUV] ? 2092 : 1786;
             if (this->configList->values[KipConfigValue_eristaGpuUV] == GPUUVLevel_NoUV) {

Source/hoc-clk/overlay/src/ui/gui/freq_choice_gui.h

@@ -55,4 +55,8 @@ class FreqChoiceGui : public BaseMenuGui {
     ~FreqChoiceGui();
 
     void listUI() override;
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        return false;
+    }
 };

Source/hoc-clk/overlay/src/ui/gui/global_override_gui.cpp

@@ -41,7 +41,7 @@ void GlobalOverrideGui::openFreqChoiceGui(HocClkModule module)
         FatalGui::openWithResultCode("hocclkIpcGetFreqList", rc);
         return;
     }
-    
+
     std::map<uint32_t, std::string> labels = {};
 
     if (module == HocClkModule_CPU) {
@@ -103,7 +103,7 @@ void GlobalOverrideGui::addModuleListItemValue(
     std::uint32_t step,
     const std::string& suffix,
     std::uint32_t divisor,
-    int decimalPlaces, 
+    int decimalPlaces,
     ValueThresholds thresholds,
     const std::vector<NamedValue>& namedValues,
     bool showDefaultValue
@@ -117,9 +117,9 @@ void GlobalOverrideGui::addModuleListItemValue(
 
     tsl::elm::ListItem* listItem =
         new tsl::elm::ListItem(hocclkFormatModule(module, true));
-    
+
     listItem->setValue(FREQ_DEFAULT_TEXT);
-    
+
     listItem->setClickListener(
         [this,
          listItem,
@@ -141,10 +141,10 @@ void GlobalOverrideGui::addModuleListItemValue(
                 if (!this->context) {
                     return false;
                 }
-                
+
                 std::uint32_t currentValue =
                     this->context->overrideFreqs[module] * divisor;
-                
+
                 ValueRange range(
                     min,
                     max,
@@ -153,22 +153,22 @@ void GlobalOverrideGui::addModuleListItemValue(
                     divisor,
                     decimalPlaces
                 );
-                
+
                 this->openValueChoiceGui(
                     listItem,
                     currentValue,
                     range,
                     categoryName,
-                    
+
                     [this, listItem, module, divisor, suffix, decimalPlaces, thresholds, namedValues, hasNamedValues, showDefaultValue](std::uint32_t value) -> bool
                     {
                         if (!this->context) {
                             return false;
                         }
-                        
+
                         this->context->overrideFreqs[module] = value / divisor;
                         this->listHz[module] = value / divisor;
-                        
+
                         if (value == 0) {
                             listItem->setValue(FREQ_DEFAULT_TEXT);
                         } else if (hasNamedValues) {
@@ -182,36 +182,36 @@ void GlobalOverrideGui::addModuleListItemValue(
                             char buf[32];
                             if (decimalPlaces > 0) {
                                 double displayValue = (double)value / divisor;
-                                snprintf(buf, sizeof(buf), "%.*f%s", 
+                                snprintf(buf, sizeof(buf), "%.*f%s",
                                         decimalPlaces, displayValue, suffix.c_str());
                             } else {
-                                snprintf(buf, sizeof(buf), "%u%s", 
+                                snprintf(buf, sizeof(buf), "%u%s",
                                         value / divisor, suffix.c_str());
                             }
                             listItem->setValue(buf);
                         }
-                        
+
                         Result rc =
                             hocclkIpcSetOverride(module, this->context->overrideFreqs[module]);
-                        
+
                         if (R_FAILED(rc))
                         {
                             FatalGui::openWithResultCode(
                                 "hocclkIpcSetOverride", rc);
                             return false;
                         }
-                        
+
                         this->lastContextUpdate = armGetSystemTick();
                         return true;
                     },
-                    
+
                     thresholds,
                     false,
                     std::map<std::uint32_t, std::string>(),
                     namedValues,
                     showDefaultValue
                 );
-                
+
                 return true;
             }
             else if ((keys & HidNpadButton_Y) == HidNpadButton_Y)
@@ -219,26 +219,26 @@ void GlobalOverrideGui::addModuleListItemValue(
                 if (!this->context) {
                     return false;
                 }
-                
+
                 this->context->overrideFreqs[module] = 0;
                 this->listHz[module] = 0;
                 listItem->setValue(FREQ_DEFAULT_TEXT);
-                
+
                 Result rc = hocclkIpcSetOverride(module, 0);
-                
+
                 if (R_FAILED(rc))
                 {
                     FatalGui::openWithResultCode("hocclkIpcSetOverride", rc);
                     return false;
                 }
-                
+
                 this->lastContextUpdate = armGetSystemTick();
                 return true;
             }
-            
+
             return false;
         });
-    
+
     this->listElement->addItem(listItem);
     this->listItems[module] = listItem;
 }
@@ -301,6 +301,11 @@ class GovernorOverrideSubMenuGui : public BaseMenuGui {
 public:
     GovernorOverrideSubMenuGui(u32 initialPacked) : packed(initialPacked) {}
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        return false;
+    }
+
     void listUI() override {
         BaseMenuGui::refresh(); // get latest context
         if(!this->context)
@@ -391,23 +396,23 @@ void GlobalOverrideGui::refresh()
 
         if (this->listItems[m] != nullptr &&
             this->listHz[m] != this->context->overrideFreqs[m]) {
-            
+
             auto it = this->customFormatModules.find((HocClkModule)m);
             if (it != this->customFormatModules.end()) {
                 std::string suffix = std::get<0>(it->second);
                 std::uint32_t divisor = std::get<1>(it->second);
                 int decimalPlaces = std::get<2>(it->second);
-                
+
                 if (this->context->overrideFreqs[m] == 0) {
                     this->listItems[m]->setValue(FREQ_DEFAULT_TEXT);
                 } else {
                     char buf[32];
                     if (decimalPlaces > 0) {
                         double displayValue = (double)this->context->overrideFreqs[m] / divisor;
-                        snprintf(buf, sizeof(buf), "%.*f%s", 
+                        snprintf(buf, sizeof(buf), "%.*f%s",
                                 decimalPlaces, displayValue, suffix.c_str());
                     } else {
-                        snprintf(buf, sizeof(buf), "%u%s", 
+                        snprintf(buf, sizeof(buf), "%u%s",
                                 this->context->overrideFreqs[m] / divisor, suffix.c_str());
                     }
                     this->listItems[m]->setValue(buf);
@@ -418,8 +423,12 @@ void GlobalOverrideGui::refresh()
                         ? formatListFreqHzMem(this->context->overrideFreqs[m], (RamDisplayUnit)configList.values[HocClkConfigValue_RamDisplayUnit])
                         : formatListFreqHz(this->context->overrideFreqs[m]));
             }
-            
+
             this->listHz[m] = this->context->overrideFreqs[m];
         }
     }
-}
+}
+
+std::string GlobalOverrideGui::getJumpToItemName() {
+    return "Temporary Overrides";
+}

Source/hoc-clk/overlay/src/ui/gui/global_override_gui.h

@@ -33,6 +33,7 @@
 #include "value_choice_gui.h"
 class GlobalOverrideGui : public BaseMenuGui {
     protected:
+    std::string getJumpToItemName() override;
     std::map<HocClkModule, std::tuple<std::string, std::uint32_t, int>> customFormatModules;
     tsl::elm::ListItem *listItems[HocClkModule_EnumMax];
     std::uint32_t listHz[HocClkModule_EnumMax];

Source/hoc-clk/overlay/src/ui/gui/info_gui.h

@@ -26,6 +26,10 @@ class InfoGui : public BaseMenuGui {
     InfoGui(std::string title, std::vector<std::string> strings);
     ~InfoGui() = default;
     void listUI() override;
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        return false;
+    }
 
     private:
     std::string m_title;

Source/hoc-clk/overlay/src/ui/gui/main_gui.cpp

@@ -24,6 +24,7 @@
  * --------------------------------------------------------------------------
  */
 
+#include <string>
 #include "about_gui.h"
 #include "app_profile_gui.h"
 #include "fatal_gui.h"
@@ -40,6 +41,8 @@ tsl::elm::Element *MainGui::baseUI() {
     return list;
 }
 
+std::string lastItemName;
+
 void MainGui::listUI() {
     // this->enabledToggle = new tsl::elm::ToggleListItem("Enable", false);
     // enabledToggle->setStateChangedListener([this](bool state) {
@@ -79,7 +82,7 @@ void MainGui::listUI() {
     tsl::elm::ListItem *globalOverrideItem = new tsl::elm::ListItem("Temporary Overrides");
     globalOverrideItem->setClickListener([this](u64 keys) {
         if ((keys & HidNpadButton_A) == HidNpadButton_A && this->context) {
-            tsl::changeTo<GlobalOverrideGui>();
+            tsl::swapTo<GlobalOverrideGui>();
             return true;
         }
 
@@ -92,7 +95,7 @@ void MainGui::listUI() {
     tsl::elm::ListItem *miscItem = new tsl::elm::ListItem("Settings");
     miscItem->setClickListener([this](u64 keys) {
         if ((keys & HidNpadButton_A) == HidNpadButton_A && this->context) {
-            tsl::changeTo<MiscGui>();
+            tsl::swapTo<MiscGui>();
             return true;
         }
 
@@ -103,7 +106,7 @@ void MainGui::listUI() {
     tsl::elm::ListItem *aboutItem = new tsl::elm::ListItem("About");
     aboutItem->setClickListener([this](u64 keys) {
         if ((keys & HidNpadButton_A) == HidNpadButton_A && this->context) {
-            tsl::changeTo<AboutGui>();
+            tsl::swapTo<AboutGui>();
             return true;
         }
 
@@ -114,7 +117,7 @@ void MainGui::listUI() {
     tsl::elm::ListItem *updateItem = new tsl::elm::ListItem("Updates");
     updateItem->setClickListener([this](u64 keys) {
         if ((keys & HidNpadButton_A) == HidNpadButton_A && this->context) {
-            tsl::changeTo<UpdateGui>();
+            tsl::swapTo<UpdateGui>();
             return true;
         }
 
@@ -122,6 +125,11 @@ void MainGui::listUI() {
     });
     this->listElement->addItem(updateItem);
 
+    if (!lastItemName.empty()) {
+        this->listElement->jumpToItem(lastItemName);
+    }
+
+    lastItemName = "";
 }
 
 void MainGui::refresh() {
@@ -131,3 +139,4 @@ void MainGui::refresh() {
     //     this->enabledToggle->setState(this->context->enabled);
     // }
 }
+

Source/hoc-clk/overlay/src/ui/gui/main_gui.h

@@ -28,6 +28,8 @@
 
 #include "base_menu_gui.h"
 
+extern std::string lastItemName;
+
 class MainGui : public BaseMenuGui {
     public:
     MainGui() {
@@ -40,4 +42,9 @@ class MainGui : public BaseMenuGui {
     u16 headerHeight() const override {
         return HOC_HEADER_HEIGHT - 25;
     }
+
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        return false;
+    }
 };

Source/hoc-clk/overlay/src/ui/gui/misc_gui.cpp

@@ -26,7 +26,7 @@
 #include "labels.h"
 #include "misc_gui.h"
 #include "ult_ext.h"
-
+#include "main_gui.h"
 
 // This workaround *may* not be nessasary, but it seems to help with reducing stutter
 static void kipDataThreadFunc(void *) {
@@ -482,6 +482,149 @@ void MiscGui::addFreqButton(HocClkConfigValue configVal, const char *altName, Ho
     this->configRanges[configVal] = ValueRange(0, 0, 0, "MHz", 1);
 }
 
+void MiscGui::addGpuFreqVoltageButton(HocClkConfigValue configVal, const char *altName, uint32_t freqHz, const ValueRange &range,
+                                      const std::string &categoryName, const ValueThresholds *thresholds,
+                                      const std::map<uint32_t, std::string> &labels, const std::vector<NamedValue> &namedValues,
+                                      bool showDefaultValue, bool kip) {
+    const char *configName = altName ? altName : hocclkFormatConfigValue(configVal, true);
+    auto infoStrings = ConfigInfoStrings(configVal, IsMariko(), IsHoag());
+
+    tsl::elm::ListItem *listItem = new tsl::elm::ListItem(configName);
+    if (!kip || this->configList->values[HocClkConfigValue_LiveGpuVoltage])
+        listItem->setTextColor(tsl::Color(120, 235, 255, 255));
+
+    uint64_t currentValue = this->configList->values[configVal];
+    char valueText[32];
+    if (currentValue == 0 && showDefaultValue) {
+        snprintf(valueText, sizeof(valueText), "%s", VALUE_DEFAULT_TEXT);
+    } else {
+        bool foundNamedValue = false;
+        for (const auto &namedValue : namedValues) {
+            if (currentValue == namedValue.value) {
+                snprintf(valueText, sizeof(valueText), "%s", namedValue.name.c_str());
+                foundNamedValue = true;
+                break;
+            }
+        }
+        if (!foundNamedValue) {
+            uint64_t displayValue = currentValue / range.divisor;
+            if (!range.suffix.empty()) {
+                snprintf(valueText, sizeof(valueText), "%lu %s", displayValue, range.suffix.c_str());
+            } else {
+                snprintf(valueText, sizeof(valueText), "%lu", displayValue);
+            }
+        }
+    }
+    listItem->setValue(valueText);
+
+    ValueThresholds thresholdsCopy = (thresholds ? *thresholds : ValueThresholds{});
+
+    listItem->setClickListener([this, configVal, range, categoryName, thresholdsCopy, labels, showDefaultValue, kip, freqHz,
+                                infoStrings = std::move(infoStrings), configName = std::string(configName)](u64 keys) {
+        if (!infoStrings.empty() && (keys & HidNpadButton_Y) && !(keys & ~HidNpadButton_Y)) {
+            tsl::changeTo<InfoGui>(configName, infoStrings);
+            return true;
+        }
+
+        if ((keys & HidNpadButton_Y) && !(keys & ~HidNpadButton_Y)) {
+            if (!this->configList->values[HocClkConfigValue_LiveGpuVoltage])
+                return false;
+
+            std::uint32_t currentValue = this->configList->values[configVal];
+
+            auto nvIt = this->configNamedValues.find(configVal);
+            const std::vector<NamedValue> &liveNamedValues = (nvIt != this->configNamedValues.end()) ? nvIt->second : std::vector<NamedValue>();
+
+            std::string liveCategoryName = categoryName + " (Live)";
+
+            auto liveCallback = [this, configVal, kip, freqHz](std::uint32_t value) {
+                this->configList->values[configVal] = value;
+                Result rc = hocclkIpcSetConfigValues(this->configList);
+                if (R_FAILED(rc)) {
+                    FatalGui::openWithResultCode("hocclkIpcSetConfigValues", rc);
+                    return false;
+                }
+                if (kip) {
+                    shouldSaveKip = true;
+                }
+                this->lastContextUpdate = armGetSystemTick();
+
+                Result rcVolt = hocClkIpcRequestGpuVoltage((uint32_t)value, freqHz);
+                if (R_FAILED(rcVolt)) {
+                    FatalGui::openWithResultCode("hocClkIpcRequestGpuVoltage", rcVolt);
+                    return false;
+                }
+                return true;
+            };
+
+            if (thresholdsCopy.warning != 0 || thresholdsCopy.danger != 0) {
+                tsl::changeTo<ValueChoiceGui>(
+                    currentValue, range, liveCategoryName,
+                    liveCallback,
+                    thresholdsCopy, true, labels, liveNamedValues, showDefaultValue);
+            } else {
+                tsl::changeTo<ValueChoiceGui>(
+                    currentValue, range, liveCategoryName,
+                    liveCallback,
+                    ValueThresholds(), false, labels, liveNamedValues, showDefaultValue);
+            }
+
+            return true;
+        }
+
+        if ((keys & HidNpadButton_A) == 0)
+            return false;
+
+        std::uint32_t currentValue = this->configList->values[configVal];
+
+        auto nvIt = this->configNamedValues.find(configVal);
+        const std::vector<NamedValue> &liveNamedValues = (nvIt != this->configNamedValues.end()) ? nvIt->second : std::vector<NamedValue>();
+
+        if (thresholdsCopy.warning != 0 || thresholdsCopy.danger != 0) {
+            tsl::changeTo<ValueChoiceGui>(
+                currentValue, range, categoryName,
+                [this, configVal, kip](std::uint32_t value) {
+                    this->configList->values[configVal] = value;
+                    Result rc = hocclkIpcSetConfigValues(this->configList);
+                    if (R_FAILED(rc)) {
+                        FatalGui::openWithResultCode("hocclkIpcSetConfigValues", rc);
+                        return false;
+                    }
+                    if (kip) {
+                        shouldSaveKip = true;
+                    }
+                    this->lastContextUpdate = armGetSystemTick();
+                    return true;
+                },
+                thresholdsCopy, true, labels, liveNamedValues, showDefaultValue);
+        } else {
+            tsl::changeTo<ValueChoiceGui>(
+                currentValue, range, categoryName,
+                [this, configVal, kip](std::uint32_t value) {
+                    this->configList->values[configVal] = value;
+                    Result rc = hocclkIpcSetConfigValues(this->configList);
+                    if (R_FAILED(rc)) {
+                        FatalGui::openWithResultCode("hocclkIpcSetConfigValues", rc);
+                        return false;
+                    }
+                    if (kip) {
+                        shouldSaveKip = true;
+                    }
+                    this->lastContextUpdate = armGetSystemTick();
+                    return true;
+                },
+                ValueThresholds(), false, labels, liveNamedValues, showDefaultValue);
+        }
+
+        return true;
+    });
+
+    this->listElement->addItem(listItem);
+    this->configButtons[configVal] = listItem;
+    this->configRanges[configVal] = range;
+    this->configNamedValues[configVal] = namedValues;
+}
+
 void MiscGui::listUI() {
     Result rc = hocclkIpcGetConfigValues(configList);
     if (R_FAILED(rc)) [[unlikely]] {
@@ -506,7 +649,7 @@ void MiscGui::listUI() {
     tsl::elm::ListItem *sysmoduleSettingsSubMenu = new tsl::elm::ListItem("General Settings");
     sysmoduleSettingsSubMenu->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<GeneralSettingsSubMenuGui>();
+            tsl::swapTo<GeneralSettingsSubMenuGui>();
             return true;
         }
         return false;
@@ -517,7 +660,7 @@ void MiscGui::listUI() {
     tsl::elm::ListItem *governorSettingsSubMenu = new tsl::elm::ListItem("Governor Settings");
     governorSettingsSubMenu->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<GovernorSettingsSubMenuGui>();
+            tsl::swapTo<GovernorSettingsSubMenuGui>();
             return true;
         }
         return false;
@@ -528,7 +671,7 @@ void MiscGui::listUI() {
     tsl::elm::ListItem *safetySubmenu = new tsl::elm::ListItem("Safety Settings");
     safetySubmenu->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<SafetySubMenuGui>();
+            tsl::swapTo<SafetySubMenuGui>();
             return true;
         }
         return false;
@@ -539,7 +682,7 @@ void MiscGui::listUI() {
     tsl::elm::ListItem *ramSubmenu = new tsl::elm::ListItem("RAM Settings");
     ramSubmenu->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<RamSubmenuGui>();
+            tsl::swapTo<RamSubmenuGui>();
             return true;
         }
         return false;
@@ -550,7 +693,7 @@ void MiscGui::listUI() {
     tsl::elm::ListItem *cpuSubmenu = new tsl::elm::ListItem("CPU Settings");
     cpuSubmenu->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<CpuSubmenuGui>();
+            tsl::swapTo<CpuSubmenuGui>();
             return true;
         }
         return false;
@@ -561,7 +704,7 @@ void MiscGui::listUI() {
     tsl::elm::ListItem *gpuSubmenu = new tsl::elm::ListItem("GPU Settings");
     gpuSubmenu->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<GpuSubmenuGui>();
+            tsl::swapTo<GpuSubmenuGui>();
             return true;
         }
         return false;
@@ -572,7 +715,7 @@ void MiscGui::listUI() {
     tsl::elm::ListItem *displaySubMenu = new tsl::elm::ListItem("Display Settings");
     displaySubMenu->setClickListener([](u64 keys) {
         if (keys & HidNpadButton_A) {
-            tsl::changeTo<DisplaySubMenuGui>();
+            tsl::swapTo<DisplaySubMenuGui>();
             return true;
         }
         return false;
@@ -584,7 +727,7 @@ void MiscGui::listUI() {
         tsl::elm::ListItem *experimentalSubMenu = new tsl::elm::ListItem("Experimental Settings");
         experimentalSubMenu->setClickListener([](u64 keys) {
             if (keys & HidNpadButton_A) {
-                tsl::changeTo<ExperimentalSettingsSubMenuGui>();
+                tsl::swapTo<ExperimentalSettingsSubMenuGui>();
                 return true;
             }
             return false;
@@ -592,6 +735,11 @@ void MiscGui::listUI() {
         experimentalSubMenu->setValue(R_ARROW);
         this->listElement->addItem(experimentalSubMenu);
     }
+
+    if (!lastItemName.empty()) {
+        this->listElement->jumpToItem(lastItemName);
+    }
+    lastItemName = "";
 }
 
 class GeneralSettingsSubMenuGui : public MiscGui {
@@ -599,6 +747,17 @@ class GeneralSettingsSubMenuGui : public MiscGui {
     GeneralSettingsSubMenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "General Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);
@@ -649,6 +808,17 @@ class ExperimentalSettingsSubMenuGui : public MiscGui {
     ExperimentalSettingsSubMenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "Experimental Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);
@@ -662,6 +832,9 @@ class ExperimentalSettingsSubMenuGui : public MiscGui {
             addConfigToggle(HocClkConfigValue_MarikoMiddleFreqs, nullptr, true);
             addConfigToggle(HocClkConfigValue_LiveCpuUv, nullptr);
         }
+
+        addConfigToggle(HocClkConfigValue_LiveGpuVoltage, "Live GPU Volt Request", false);
+
         std::vector<NamedValue> gpuSchedMethodValues = {
             NamedValue("INI", GpuSchedulingOverrideMethod_Ini),
             NamedValue("NV Service", GpuSchedulingOverrideMethod_NvService),
@@ -760,6 +933,17 @@ class GovernorSettingsSubMenuGui : public MiscGui {
     GovernorSettingsSubMenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "Governor Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);
@@ -785,6 +969,17 @@ class DisplaySubMenuGui : public MiscGui {
     DisplaySubMenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "Display Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);
@@ -834,6 +1029,17 @@ class SafetySubMenuGui : public MiscGui {
     SafetySubMenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "Safety Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);
@@ -858,6 +1064,17 @@ class RamSubmenuGui : public MiscGui {
     RamSubmenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "RAM Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         BaseMenuGui::refresh();
@@ -1054,7 +1271,7 @@ class RamSubmenuGui : public MiscGui {
         tsl::elm::ListItem *latenciesSubmenu = new tsl::elm::ListItem("RAM Latency Editor");
         latenciesSubmenu->setClickListener([](u64 keys) {
             if (keys & HidNpadButton_A) {
-                tsl::changeTo<RamLatenciesSubmenuGui>();
+                tsl::swapTo<RamLatenciesSubmenuGui>();
                 return true;
             }
             return false;
@@ -1065,7 +1282,7 @@ class RamSubmenuGui : public MiscGui {
         tsl::elm::ListItem *timingsSubmenu = new tsl::elm::ListItem("RAM Timing Reductions");
         timingsSubmenu->setClickListener([](u64 keys) {
             if (keys & HidNpadButton_A) {
-                tsl::changeTo<RamTimingsSubmenuGui>();
+                tsl::swapTo<RamTimingsSubmenuGui>();
                 return true;
             }
             return false;
@@ -1077,7 +1294,7 @@ class RamSubmenuGui : public MiscGui {
             tsl::elm::ListItem *socVoltageTable = new tsl::elm::ListItem("SOC Voltage Table");
             socVoltageTable->setClickListener([](u64 keys) {
                 if (keys & HidNpadButton_A) {
-                    tsl::changeTo<SocCustomTableSubmenuGui>();
+                    tsl::swapTo<SocCustomTableSubmenuGui>();
                     return true;
                 }
                 return false;
@@ -1085,6 +1302,11 @@ class RamSubmenuGui : public MiscGui {
             socVoltageTable->setValue(R_ARROW);
             this->listElement->addItem(socVoltageTable);
         }
+
+        if (!lastItemName.empty()) {
+            this->listElement->jumpToItem(lastItemName);
+        }
+        lastItemName = "";
     }
 };
 
@@ -1093,6 +1315,17 @@ class RamTimingsSubmenuGui : public MiscGui {
     RamTimingsSubmenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "RAM Timing Reductions";
+            tsl::swapTo<RamSubmenuGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);
@@ -1340,6 +1573,17 @@ class RamLatenciesSubmenuGui : public MiscGui {
     RamLatenciesSubmenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "RAM Latency Editor";
+            tsl::swapTo<RamSubmenuGui>();
+            return true;
+        }
+        return false;
+    }
+
     tsl::elm::Element *baseUI() override {
         auto *list = new TopAnchoredList();
         this->listElement = list;
@@ -1841,6 +2085,17 @@ class CpuSubmenuGui : public MiscGui {
     CpuSubmenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "CPU Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);  // populate config list early otherwise wont work
@@ -1879,27 +2134,23 @@ class CpuSubmenuGui : public MiscGui {
                             &mCpuVoltThresholds, {}, {}, false, true);
 
             std::vector<NamedValue> maxClkOptions = {
-                NamedValue("1963 MHz", 1963500), NamedValue("2091 MHz", 2091000), NamedValue("2193 MHz", 2193000), NamedValue("2295 MHz", 2295000),
-                NamedValue("2397 MHz", 2397000), NamedValue("2499 MHz", 2499000), NamedValue("2601 MHz", 2601000), NamedValue("2703 MHz", 2703000),
+                NamedValue("1963 MHz", 1963500, "Rating"), NamedValue("2091 MHz", 2091000), NamedValue("2193 MHz", 2193000), NamedValue("2295 MHz", 2295000),
+                NamedValue("2397 MHz", 2397000, "Safe Max"), NamedValue("2499 MHz", 2499000, "Unsafe Max"), NamedValue("2601 MHz", 2601000), NamedValue("2703 MHz", 2703000, "Absolute Max"),
             };
 
             addConfigButton(KipConfigValue_marikoCpuMaxClock, "CPU Max Clock", ValueRange(0, 0, 1, "", 1), "CPU Max Clock",
                             this->configList->values[KipConfigValue_marikoCpuUVHigh] ? &mCpuClockThresholdsUV : &mCpuClockThresholds, {},
                             maxClkOptions, false, true);
 
-            std::vector<NamedValue> ClkOptions = {
-                NamedValue("1963 MHz", 1963500), NamedValue("2091 MHz", 2091000), NamedValue("2193 MHz", 2193000), NamedValue("2295 MHz", 2295000),
-                NamedValue("2397 MHz", 2397000), NamedValue("2499 MHz", 2499000), NamedValue("2601 MHz", 2601000), NamedValue("2703 MHz", 2703000),
-            };
-            std::vector<NamedValue> ClkOptionsRamOc = {
+            std::vector<NamedValue> clkOptionsRamOc = {
                 NamedValue("1122 MHz", 1122000), NamedValue("1224 MHz", 1224000), NamedValue("1326 MHz", 1326000), NamedValue("1428 MHz", 1428000),
-                NamedValue("1581 MHz", 1581000), NamedValue("1683 MHz", 1683000), NamedValue("1785 MHz", 1785000), NamedValue("1887 MHz", 1887000),
+                NamedValue("1581 MHz", 1581000), NamedValue("1683 MHz", 1683000, "Default"), NamedValue("1785 MHz", 1785000), NamedValue("1887 MHz", 1887000),
                 NamedValue("1963 MHz", 1963500), NamedValue("2091 MHz", 2091000), NamedValue("2193 MHz", 2193000), NamedValue("2295 MHz", 2295000),
                 NamedValue("2397 MHz", 2397000), NamedValue("2499 MHz", 2499000), NamedValue("2601 MHz", 2601000), NamedValue("2703 MHz", 2703000),
             };
 
             addConfigButton(KipConfigValue_marikoCpuBoostClock, "CPU Boost Clock", ValueRange(0, 0, 1, "", 1), "CPU Boost Clock",
-                            this->configList->values[KipConfigValue_marikoCpuUVHigh] ? &mCpuClockThresholdsUV : &mCpuClockThresholds, {}, ClkOptions,
+                            this->configList->values[KipConfigValue_marikoCpuUVHigh] ? &mCpuClockThresholdsUV : &mCpuClockThresholds, {}, maxClkOptions,
                             false, true);
 
             std::vector<NamedValue> emcMaxClock = {
@@ -1959,7 +2210,7 @@ class CpuSubmenuGui : public MiscGui {
             };
             addConfigToggle(HocClkConfigValue_AutoRAMCPUOverclock, "Auto CPU RAM OC");
             addConfigButton(HocClkConfigValue_AutoRamCpuCpuOCFreq, "Auto CPU RAM OC CPU clock", ValueRange(0, 0, 1, "", 1), "CPU Clock",
-                            &thresholdsDisabled, {}, ClkOptionsRamOc, false, false);
+                            &thresholdsDisabled, {}, clkOptionsRamOc, false, false);
             addConfigButton(HocClkConfigValue_AutoRamCpuRamOCThreshold, "Auto CPU RAM OC Threshold", ValueRange(0, 0, 1, "", 1), "RAM Clock",
                             &thresholdsDisabled, {}, emcMaxClock, false, false);
         } else {
@@ -1975,7 +2226,7 @@ class CpuSubmenuGui : public MiscGui {
                             &eCpuVoltThresholds, {}, {}, false, true);
 
             std::vector<NamedValue> maxClkOptions = {
-                NamedValue("1785 MHz", 1785), NamedValue("1887 MHz", 1887), NamedValue("1989 MHz", 1989), NamedValue("2091 MHz", 2091),
+                NamedValue("1785 MHz", 1785, "Rating"), NamedValue("1887 MHz", 1887), NamedValue("1989 MHz", 1989), NamedValue("2091 MHz", 2091),
                 NamedValue("2193 MHz", 2193), NamedValue("2295 MHz", 2295), NamedValue("2397 MHz", 2397),
             };
             ValueThresholds eCpuMaxClockThresholds(1785, 2091);
@@ -1999,6 +2250,17 @@ class GpuSubmenuGui : public MiscGui {
     GpuSubmenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "GPU Settings";
+            tsl::swapTo<MiscGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
         Result rc = hocclkIpcGetConfigValues(this->configList);
@@ -2129,13 +2391,18 @@ class GpuSubmenuGui : public MiscGui {
         tsl::elm::ListItem *customTableSubmenu = new tsl::elm::ListItem("GPU Voltage Table");
         customTableSubmenu->setClickListener([](u64 keys) {
             if (keys & HidNpadButton_A) {
-                tsl::changeTo<GpuCustomTableSubmenuGui>();
+                tsl::swapTo<GpuCustomTableSubmenuGui>();
                 return true;
             }
             return false;
         });
         customTableSubmenu->setValue(R_ARROW);
         this->listElement->addItem(customTableSubmenu);
+
+        if (!lastItemName.empty()) {
+            this->listElement->jumpToItem(lastItemName);
+        }
+        lastItemName = "";
     }
 };
 
@@ -2144,6 +2411,17 @@ class GpuCustomTableSubmenuGui : public MiscGui {
     GpuCustomTableSubmenuGui() {
     }
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "GPU Voltage Table";
+            tsl::swapTo<GpuSubmenuGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
 
@@ -2238,10 +2516,9 @@ class GpuCustomTableSubmenuGui : public MiscGui {
         };
 
         if (IsMariko()) {
-
             tsl::elm::CustomDrawer *warningText = new tsl::elm::CustomDrawer([](tsl::gfx::Renderer *renderer, s32 x, s32 y, s32 w, s32 h) {
                 renderer->drawString("\uE150 Setting GPU Clocks past", false, x + 20, y + 30, 18, tsl::style::color::ColorText);
-                renderer->drawString("1228MHz without a proper undervolt", false, x + 20, y + 50, 18, tsl::style::color::ColorText);
+                renderer->drawString("1305MHz without a proper undervolt", false, x + 20, y + 50, 18, tsl::style::color::ColorText);
                 renderer->drawString("can cause degradation or damage", false, x + 20, y + 70, 18, tsl::style::color::ColorText);
                 renderer->drawString("to your console!", false, x + 20, y + 90, 18, tsl::style::color::ColorText);
                 renderer->drawString("Proceed at your own risk!", false, x + 20, y + 110, 18, tsl::style::color::ColorText);
@@ -2249,61 +2526,61 @@ class GpuCustomTableSubmenuGui : public MiscGui {
             warningText->setBoundaries(0, 0, tsl::cfg::FramebufferWidth, 130);
             this->listElement->addItem(warningText);
 
-            addConfigButton(KipConfigValue_g_volt_76800, "76.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts, false,
-                            true);
-            addConfigButton(KipConfigValue_g_volt_153600, "153.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_230400, "230.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_307200, "307.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_384000, "384.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_460800, "460.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_537600, "537.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_614400, "614.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_691200, "691.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_768000, "768.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_844800, "844.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_921600, "921.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_998400, "998.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {}, mGpuVolts,
-                            false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_76800, "76.8MHz", 76'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_153600, "153.6MHz", 153'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_230400, "230.4MHz", 230'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_307200, "307.2MHz", 307'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_384000, "384.0MHz", 384'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_460800, "460.8MHz", 460'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_537600, "537.6MHz", 537'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_614400, "614.4MHz", 614'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_691200, "691.2MHz", 691'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_768000, "768.0MHz", 768'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_844800, "844.8MHz", 844'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_921600, "921.6MHz", 921'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_998400, "998.4MHz", 998'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+
             if (this->configList->values[KipConfigValue_marikoGpuUV] >= GPUUVLevel_SLT) {
-                addConfigButton(KipConfigValue_g_volt_1075200, "1075.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                mGpuVolts, false, true);
+                addGpuFreqVoltageButton(KipConfigValue_g_volt_1075200, "1075.2MHz", 1'075'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                        &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
                 if (this->configList->values[KipConfigValue_marikoGpuUV] >= GPUUVLevel_HiOPT)
-                    addConfigButton(KipConfigValue_g_volt_1152000, "1152.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1152000, "1152.0MHz", 1'152'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
                 if (this->configList->values[KipConfigValue_marikoGpuUV] >= GPUUVLevel_HighUV) {
-                    addConfigButton(KipConfigValue_g_volt_1228800, "1228.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1267200, "1267.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1305600, "1305.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1344000, "1344.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts_noAuto, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1382400, "1382.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts_noAuto, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1420800, "1420.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts_noAuto, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1459200, "1459.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts_noAuto, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1497600, "1497.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts_noAuto, false, true);
-                    addConfigButton(KipConfigValue_g_volt_1536000, "1536.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &MgpuVmaxThresholds, {},
-                                    mGpuVolts_noAuto, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1228800, "1228.8MHz", 1'228'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1267200, "1267.2MHz", 1'267'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1305600, "1305.6MHz", 1'305'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1344000, "1344.0MHz", 1'344'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts_noAuto, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1382400, "1382.4MHz", 1'382'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts_noAuto, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1420800, "1420.8MHz", 1'420'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts_noAuto, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1459200, "1459.2MHz", 1'459'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts_noAuto, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1497600, "1497.6MHz", 1'497'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts_noAuto, false, true);
+                    addGpuFreqVoltageButton(KipConfigValue_g_volt_1536000, "1536.0MHz", 1'536'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                            &MgpuVmaxThresholds, {}, mGpuVolts_noAuto, false, true);
                 }
             }
         } else {
-
             tsl::elm::CustomDrawer *warningText = new tsl::elm::CustomDrawer([](tsl::gfx::Renderer *renderer, s32 x, s32 y, s32 w, s32 h) {
                 renderer->drawString("\uE150 Setting GPU Clocks past", false, x + 20, y + 30, 18, tsl::style::color::ColorText);
                 renderer->drawString("921MHz without a proper undervolt", false, x + 20, y + 50, 18, tsl::style::color::ColorText);
@@ -2314,62 +2591,63 @@ class GpuCustomTableSubmenuGui : public MiscGui {
             warningText->setBoundaries(0, 0, tsl::cfg::FramebufferWidth, 130);
             this->listElement->addItem(warningText);
 
-            addConfigButton(KipConfigValue_g_volt_e_76800, "76.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_115200, "115.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_153600, "153.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_192000, "192.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_230400, "230.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_268800, "268.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_307200, "307.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_345600, "345.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_384000, "384.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_422400, "422.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_460800, "460.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_499200, "499.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_537600, "537.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_576000, "576.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_614400, "614.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_652800, "652.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_691200, "691.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_729600, "729.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_768000, "768.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_806400, "806.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_844800, "844.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_883200, "883.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
-            addConfigButton(KipConfigValue_g_volt_e_921600, "921.6MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {}, eGpuVolts,
-                            false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_76800, "76.8MHz", 76'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_115200, "115.2MHz", 115'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_153600, "153.6MHz", 153'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_192000, "192.0MHz", 192'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_230400, "230.4MHz", 230'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_268800, "268.8MHz", 268'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_307200, "307.2MHz", 307'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_345600, "345.6MHz", 345'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_384000, "384.0MHz", 384'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_422400, "422.4MHz", 422'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_460800, "460.8MHz", 460'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_499200, "499.2MHz", 499'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_537600, "537.6MHz", 537'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_576000, "576.0MHz", 576'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_614400, "614.4MHz", 614'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_652800, "652.8MHz", 652'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_691200, "691.2MHz", 691'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_729600, "729.6MHz", 729'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_768000, "768.0MHz", 768'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_806400, "806.4MHz", 806'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_844800, "844.8MHz", 844'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_883200, "883.2MHz", 883'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+            addGpuFreqVoltageButton(KipConfigValue_g_volt_e_921600, "921.6MHz", 921'600'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                    &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+
             if (this->configList->values[KipConfigValue_eristaGpuUV] >= GPUUVLevel_SLT)
-                addConfigButton(KipConfigValue_g_volt_e_960000, "960.0MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {},
-                                eGpuVolts, false, true);
+                addGpuFreqVoltageButton(KipConfigValue_g_volt_e_960000, "960.0MHz", 960'000'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                        &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
             if (this->configList->values[KipConfigValue_eristaGpuUV] >= GPUUVLevel_HiOPT) {
-                addConfigButton(KipConfigValue_g_volt_e_998400, "998.4MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {},
-                                eGpuVolts, false, true);
-                addConfigButton(KipConfigValue_g_volt_e_1036800, "1036.8MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {},
-                                eGpuVolts_noAuto, false, true);
-                addConfigButton(KipConfigValue_g_volt_e_1075200, "1075.2MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &EgpuVmaxThresholds, {},
-                                eGpuVolts_noAuto, false, true);
+                addGpuFreqVoltageButton(KipConfigValue_g_volt_e_998400, "998.4MHz", 998'400'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                        &EgpuVmaxThresholds, {}, eGpuVolts, false, true);
+                addGpuFreqVoltageButton(KipConfigValue_g_volt_e_1036800, "1036.8MHz", 1'036'800'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                        &EgpuVmaxThresholds, {}, eGpuVolts_noAuto, false, true);
+                addGpuFreqVoltageButton(KipConfigValue_g_volt_e_1075200, "1075.2MHz", 1'075'200'000, ValueRange(0, 0, 0, "0", 1), "Voltage",
+                                        &EgpuVmaxThresholds, {}, eGpuVolts_noAuto, false, true);
             }
         }
     }
@@ -2379,6 +2657,17 @@ class SocCustomTableSubmenuGui : public MiscGui {
     public:
     SocCustomTableSubmenuGui() {}
 
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        if (keysDown & KEY_B) {
+            triggerExitFeedback();
+            lastItemName = "SOC Voltage Table";
+            tsl::swapTo<RamSubmenuGui>();
+            return true;
+        }
+        return false;
+    }
+
     protected:
     void listUI() override {
 
@@ -2432,6 +2721,8 @@ class SocCustomTableSubmenuGui : public MiscGui {
         addConfigButton(KipConfigValue_g_soc_volt_3133000, "3133MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &voltageThresholds, {}, socVolts, false, true);
         addConfigButton(KipConfigValue_g_soc_volt_3166000, "3166MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &voltageThresholds, {}, socVolts, false, true);
         addConfigButton(KipConfigValue_g_soc_volt_3200000, "3200MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &voltageThresholds, {}, socVolts, false, true);
+        addConfigButton(KipConfigValue_g_soc_volt_3266000, "3266MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &voltageThresholds, {}, socVolts, false, true);
+        addConfigButton(KipConfigValue_g_soc_volt_3333000, "3333MHz", ValueRange(0, 0, 0, "0", 1), "Voltage", &voltageThresholds, {}, socVolts, false, true);
     }
 };
 
@@ -2526,3 +2817,7 @@ void MiscGui::refresh() {
         }
     }
 }
+
+std::string MiscGui::getJumpToItemName() {
+    return "Settings";
+}

Source/hoc-clk/overlay/src/ui/gui/misc_gui.h

@@ -58,9 +58,14 @@ class MiscGui : public BaseMenuGui {
                           const std::vector<NamedValue> &namedValues = {}, bool showDefaultValue = true, const char *subText = nullptr,
                           bool kip = false);
     void addFreqButton(HocClkConfigValue configVal, const char *altName, HocClkModule module, const std::map<uint32_t, std::string> &labels = {});
+    void addGpuFreqVoltageButton(HocClkConfigValue configVal, const char *altName, uint32_t freqHz, const ValueRange &range,
+                              const std::string &categoryName, const ValueThresholds *thresholds,
+                              const std::map<uint32_t, std::string> &labels, const std::vector<NamedValue> &namedValues,
+                              bool showDefaultValue, bool kip);
     void updateConfigToggles();
 
     tsl::elm::ToggleListItem *enabledToggle;
     u8 frameCounter = 60;
     bool shouldSaveKip = false;
+    std::string getJumpToItemName() override;
 };

Source/hoc-clk/overlay/src/ui/gui/update_gui.cpp

@@ -267,5 +267,10 @@ bool UpdateGui::handleInput(u64 keysDown, u64 keysHeld,
         requestCancel();
         return true;
     }
-    return false;
+
+    return BaseMenuGui::handleInput(keysDown, keysHeld, touchPos, leftJoy, rightJoy);
+}
+
+std::string UpdateGui::getJumpToItemName() {
+    return "Updates";
 }

Source/hoc-clk/overlay/src/ui/gui/update_gui.h

@@ -77,4 +77,7 @@ private:
 
     tsl::elm::ListItem *m_items[2] = {nullptr, nullptr};
     UpdateStatusPanel *m_status = nullptr;
+
+protected:
+    std::string getJumpToItemName() override;
 };

Source/hoc-clk/overlay/src/ui/gui/value_choice_gui.h

@@ -101,4 +101,9 @@ class ValueChoiceGui : public BaseMenuGui {
     }
 
     void listUI() override;
+
+    bool handleInput(u64 keysDown, u64 keysHeld, const HidTouchState &touchPos, HidAnalogStickState leftJoyStick,
+                      HidAnalogStickState rightJoyStick) override {
+        return false;
+    }
 };

Source/hoc-clk/sysmodule/Makefile

@@ -28,9 +28,9 @@ INCLUDES	:=	../common/include src/hos src/soc src/i2c src/util src/pwr src/ipc
 EXEFS_SRC	:=	exefs_src
 LIBNAMES	:=	minIni
 # major minor patch
-TARGET_VERSION	:= 2.4.2
-KIP_VERSION :=  242
-CUST_REV    :=  5
+TARGET_VERSION	:= 2.5.0
+KIP_VERSION :=  250
+CUST_REV    :=  6
 
 #---------------------------------------------------------------------------------
 # options for code generation

Source/hoc-clk/sysmodule/src/board/board_volt.cpp

@@ -281,6 +281,16 @@ namespace board {
         return INVALID_HANDLE;
     }
 
+    bool ValidateHandle(Handle handle) {
+        if (handle == INVALID_HANDLE) {
+            fileUtils::LogLine("Invalid handle!");
+            return false;
+        }
+
+        return true;
+    }
+
+
     void CacheGpuVoltTable() {
         // Likely CPU regulator?
         UnkRegulator reg = {
@@ -290,8 +300,7 @@ namespace board {
         };
 
         Handle handle = GetPcvHandle();
-        if (handle == INVALID_HANDLE) {
-            fileUtils::LogLine("[dvfs] Invalid handle!");
+        if (!ValidateHandle(handle)) {
             return;
         }
 
@@ -335,16 +344,16 @@ namespace board {
                 }
 
                 /* 800mV on Mariko, 950mV on Erista. */
-                u32 vmax = GetSocType() == HocClkSocType_Mariko ? 800 : 950;
+                u32 bootVoltage = GetSocType() == HocClkSocType_Mariko ? 800 : 950;
                 constexpr u32 GpuVoltageTableOffset = 312;
-                if (!std::memcmp(&buffer[index + GpuVoltageTableOffset], &vmax, sizeof(vmax))) {
-                    std::memcpy(voltData.voltTable, &buffer[index + GpuVoltageTableOffset], sizeof(voltData.voltTable));
+                if (!std::memcmp(&buffer[index + GpuVoltageTableOffset], &bootVoltage, sizeof(bootVoltage))) {
+                    std::memcpy(voltData.voltTableStock, &buffer[index + GpuVoltageTableOffset], sizeof(voltData.voltTableStock));
+                    std::memcpy(voltData.voltTableLive, voltData.voltTableStock, sizeof(voltData.voltTableStock));
                     voltData.voltTableAddress = base + memoryInfo.addr + GpuVoltageTableOffset + index;
                 }
 
                 constexpr u32 CpuVoltageTableOffset = 0xB8;
                 std::memcpy(cpuVoltTable, &buffer[index + CpuVoltageTableOffset], sizeof(cpuVoltTable));  // TODO: verify the CPU table
-
                 svcCloseHandle(handle);
                 handle = INVALID_HANDLE;
 
@@ -353,8 +362,8 @@ namespace board {
                     fileUtils::LogLine("[dvfs] cpu volt %d: %u mV", i, cpuVoltTable[i]);
                 }
 
-                for (int i = 0; i < (int)std::size(voltData.voltTable); ++i) {
-                    fileUtils::LogLine("[dvfs] gpu volt %d: %u mV", i, voltData.voltTable[0][i]);
+                for (int i = 0; i < (int)std::size(voltData.voltTableStock); ++i) {
+                    fileUtils::LogLine("[dvfs] gpu volt %d: %u mV", i, voltData.voltTableStock[0][i]);
                 }
                 return;
             }
@@ -365,10 +374,31 @@ namespace board {
         return;
     }
 
+    // Result ReadGpuVoltTable(u32 *table) {
+    //     Handle handle = GetPcvHandle();
+    //     if (!ValidateHandle(handle)) {
+    //         return 1;
+    //     }
+    //
+    //     Result rc = svcReadDebugProcessMemory(table, handle, voltData.voltTableAddress, sizeof(voltData.voltTableStock));
+    //     svcCloseHandle(handle);
+    //     return rc;
+    // }
+
+    Result WriteGpuVoltTable(u32 *table) {
+        Handle handle = GetPcvHandle();
+        if (!ValidateHandle(handle)) {
+            return 1;
+        }
+
+        Result rc = svcWriteDebugProcessMemory(handle, table, voltData.voltTableAddress, sizeof(voltData.voltTableStock));
+        svcCloseHandle(handle);
+        return rc;
+    }
+
     void PcvHijackGpuVolts(u32 vmin) {
-        u32 table[192];
-        static_assert(sizeof(table) == sizeof(voltData.voltTable), "Invalid gpu voltage table size!");
-        std::memcpy(table, voltData.voltTable, sizeof(voltData.voltTable));
+        u32 table[GpuVoltTableSize];
+        std::memcpy(table, voltData.voltTableLive, sizeof(voltData.voltTableLive));
 
         if (voltData.ramVmin == vmin) {
             return;
@@ -380,20 +410,50 @@ namespace board {
             }
         }
 
-        Handle handle = GetPcvHandle();
-        if (handle == INVALID_HANDLE) {
-            fileUtils::LogLine("Invalid handle!");
+        ASSERT_RESULT_OK(WriteGpuVoltTable(table), "WriteGpuVoltTable");
+        voltData.ramVmin = vmin;
+        fileUtils::LogLine("[dvfs] voltage set to %u mV", vmin);
+    }
+
+    u32 GetGpuFreqIndex(u32 hz) {
+        u32 list[HOCCLK_FREQ_LIST_MAX];
+        u32 count;
+
+        GetFreqList(HocClkModule_GPU, list, HOCCLK_FREQ_LIST_MAX, &count);
+
+        for (u32 i = 0; i < count; ++i) {
+            if (list[i] == hz) {
+                return i;
+            }
+        }
+
+        return HOCCLK_FREQ_LIST_MAX;
+    }
+
+    void PcvHijackGpuFrequency(u32 voltage, u32 hz) {
+        u32 freqIndex = GetGpuFreqIndex(hz);
+        if (freqIndex == HOCCLK_FREQ_LIST_MAX) {
             return;
         }
 
-        Result rc = svcWriteDebugProcessMemory(handle, table, voltData.voltTableAddress, sizeof(table));
+        bool voltageReset = (voltage == 0);
 
-        if (R_SUCCEEDED(rc)) {
-            voltData.ramVmin = vmin;
+        for (u32 i = 0; i < GpuVoltTableTempCount; ++i) {
+            if (voltageReset) {
+                voltage = voltData.voltTableStock[i][freqIndex];
+            }
+
+            voltData.voltTableLive[i][freqIndex] = voltage;
         }
 
-        svcCloseHandle(handle);
-        fileUtils::LogLine("[dvfs] voltage set to %u mV", vmin);
+        if (voltageReset) {
+            voltage = voltData.voltTableStock[GpuVoltTableTempCount - 2 /* 70C */][freqIndex];
+        }
+
+        if (voltage >= voltData.ramVmin) {
+            /* Only update the table if it's safe to do so. */
+            ASSERT_RESULT_OK(WriteGpuVoltTable(reinterpret_cast<u32 *>(voltData.voltTableLive)), "WriteGpuVoltTable");
+        }
     }
 
     u32 GetMinimumGpuVmin(u32 freqMhz, u32 bracket) {

Source/hoc-clk/sysmodule/src/board/board_volt.hpp

@@ -22,11 +22,19 @@
 
 namespace board {
 
+    constexpr u32 GpuVoltTableTempCount = 6;
+    constexpr u32 GpuVoltFreqTempCount  = 32;
+    constexpr size_t GpuVoltTableSize   = GpuVoltTableTempCount * GpuVoltFreqTempCount;
+
     struct GpuVoltData {
-        u32 voltTable[6][32] = {};
+        u32 voltTableStock[GpuVoltTableTempCount][GpuVoltFreqTempCount] = {};
+        u32 voltTableRamOc[GpuVoltTableTempCount][GpuVoltFreqTempCount] = {};
+        u32 voltTableLive[GpuVoltTableTempCount][GpuVoltFreqTempCount]  = {};
+
         u64 voltTableAddress;
         u32 ramVmin;
     };
+
     struct UnkRegulator {
         u32 voltageMin;
         u32 voltageStep;
@@ -49,6 +57,7 @@ namespace board {
     u32 GetVoltage(HocClkVoltage voltage);
     void CacheGpuVoltTable();
     void PcvHijackGpuVolts(u32 vmin);
+    void PcvHijackGpuFrequency(u32 voltage, u32 hz);
     u32 GetMinimumGpuVmin(u32 freqMhz, u32 bracket);
 
 }  // namespace board

Source/hoc-clk/sysmodule/src/file/kip.cpp

@@ -19,9 +19,9 @@
 #include "../i2c/i2cDrv.h"
 #include "../mgr/clock_manager.hpp"
 #include "file_utils.hpp"
+#include "../mapping/mem_map.hpp"
 #include "kip.hpp"
 
-
 namespace kip {
 
     bool kipAvailable = false;
@@ -140,7 +140,7 @@ namespace kip {
             table.eristaGpuVoltArray[i] = config::GetConfigValue((HocClkConfigValue)(KipConfigValue_g_volt_e_76800 + i));
         }
 
-        for (size_t i = 0; i < 26; ++i) {
+        for (size_t i = 0; i < 28; ++i) {
             table.marikoSocVoltArray[i] = config::GetConfigValue((HocClkConfigValue) (KipConfigValue_g_soc_volt_1866000 + i));
         }
 
@@ -172,6 +172,24 @@ namespace kip {
         }
     }
 
+    bool IsKipLoaded() {
+        constexpr u32 ExpectedMagic = 0x686F634D;
+        constexpr uintptr_t LoadMagicAddress = 0x4003DC00;
+        u32 iramValue = {};
+
+        SmcCopyFromIram(&iramValue, LoadMagicAddress, sizeof(iramValue));
+
+        if (iramValue == ExpectedMagic) {
+            iramValue = 0;
+            SmcCopyToIram(LoadMagicAddress, &iramValue, sizeof(iramValue));
+            return true;
+        }
+
+        notification::writeNotification("Kip is not loaded!");
+        fileUtils::LogLine("Kip was not loaded!");
+        return false;
+    }
+
     // I know this is very hacky, but the config system in the sysmodule doesn't really support writing
 
     void GetKipData() {
@@ -231,6 +249,7 @@ namespace kip {
             return;
         }
 
+        clockManager::gContext.isKipLoaded = IsKipLoaded();
         clockManager::gContext.kipVersion = kipVersion;
         configValues.values[KipConfigValue_custRev] = cust_get_cust_rev(&table);
         configValues.values[KipConfigValue_KipVersion] = cust_get_kip_version(&table);  // Run this after the check so we can do migration process
@@ -350,4 +369,5 @@ namespace kip {
         }
         config::SetConfigValues(&configValues, true);
     }
+
 }  // namespace kip

Source/hoc-clk/sysmodule/src/file/kip.hpp

@@ -97,7 +97,7 @@ namespace kip {
 
         u32 eristaGpuVoltArray[27];
         u32 marikoGpuVoltArray[24];
-        s32 marikoSocVoltArray[26];
+        s32 marikoSocVoltArray[28];
 
         u32 t6_tRTW_fine_tune;
         u32 t7_tWTR_fine_tune;
@@ -714,6 +714,8 @@ namespace kip {
     DECL_MARIKO_SOC_VOLT_HELPER(3133000, 23)
     DECL_MARIKO_SOC_VOLT_HELPER(3166000, 24)
     DECL_MARIKO_SOC_VOLT_HELPER(3200000, 25)
+    DECL_MARIKO_SOC_VOLT_HELPER(3266000, 26)
+    DECL_MARIKO_SOC_VOLT_HELPER(3333000, 27)
 
 #define DECL_ERISTA_GPU_VOLT_GET(freq, idx)                                  \
     static inline u32 cust_get_erista_gpu_volt_##freq##_val(const char *p) { \
@@ -817,6 +819,8 @@ namespace kip {
     DECL_MARIKO_SOC_VOLT_GET(3133000, 23)
     DECL_MARIKO_SOC_VOLT_GET(3166000, 24)
     DECL_MARIKO_SOC_VOLT_GET(3200000, 25)
+    DECL_MARIKO_SOC_VOLT_GET(3266000, 26)
+    DECL_MARIKO_SOC_VOLT_GET(3333000, 27)
 
     void MigrateKipData(u32 custRev, u32 version);
     void SetKipData();

Source/hoc-clk/sysmodule/src/ipc/ipc_service.cpp

@@ -141,6 +141,11 @@ namespace ipcService {
             return 0;
         }
 
+        Result RequestGpuVoltage(HocClkIpc_RequestGpuVoltage_Args *args) {
+            clockManager::ApplyGpuFreqVoltRequest(args->voltage, args->hz);
+            return 0;
+        }
+
         Result ServiceHandlerFunc(void *arg, const IpcServerRequest *r, u8 *out_data, size_t *out_dataSize) {
             (void)arg;
             switch (r->data.cmdId) {
@@ -235,6 +240,12 @@ namespace ipcService {
                         return 0;
                     }
                     break;
+
+                case HocClkIpcCmd_RequestGpuVoltage:
+                    if (r->data.size >= sizeof(HocClkIpc_RequestGpuVoltage_Args)) {
+                        return RequestGpuVoltage((HocClkIpc_RequestGpuVoltage_Args *)r->data.ptr);
+                    }
+                    break;
             }
 
             return HOCCLK_ERROR(Generic);

Source/hoc-clk/sysmodule/src/mapping/mem_map.cpp

@@ -19,7 +19,6 @@
 
 #include "../file/file_utils.hpp"
 
-
 Result QueryMemoryMapping(u64 *virtaddr, u64 physaddr, u64 size) {
     if (hosversionAtLeast(10, 0, 0)) {
         u64 out_size;
@@ -37,3 +36,33 @@ Result MapAddress(u64 &va, const u64 &physAddr, const char *name) {
 
     return mapResult;
 }
+
+Result SmcCopyFromIram(void *dest, uintptr_t src, u32 size) {
+    SecmonArgs args;
+    args.X[0] = 0xF0000201;
+    args.X[1] = (u64)dest;
+    args.X[2] = (u64)src;
+    args.X[3] = size;
+    args.X[4] = 0;
+    svcCallSecureMonitor(&args);
+    Result rc = 0;
+    if (args.X[0] != 0) {
+        rc = (26u | ((u32)args.X[0] << 9u));
+    }
+    return rc;
+}
+
+Result SmcCopyToIram(uintptr_t dest, const void *src, u32 size) {
+    SecmonArgs args;
+    args.X[0] = 0xF0000201;
+    args.X[1] = (u64)src;
+    args.X[2] = (u64)dest;
+    args.X[3] = size;
+    args.X[4] = 1;
+    svcCallSecureMonitor(&args);
+    Result rc = 0;
+    if (args.X[0] != 0) {
+        rc = (26u | ((u32)args.X[0] << 9u));
+    }
+    return rc;
+}

Source/hoc-clk/sysmodule/src/mapping/mem_map.hpp

@@ -20,3 +20,5 @@
 
 Result QueryMemoryMapping(u64 *virtaddr, u64 physaddr, u64 size);
 Result MapAddress(u64 &va, const u64 &physAddr, const char *name);
+Result SmcCopyFromIram(void *dest, uintptr_t src, u32 size);
+Result SmcCopyToIram(uintptr_t dest, const void *src, u32 size);

Source/hoc-clk/sysmodule/src/mgr/clock_manager.cpp

@@ -305,23 +305,6 @@ namespace clockManager {
             return true;
         }
 
-        if (config::GetConfigValue(HocClkConfigValue_AutoRAMCPUOverclock) && !isBoost && !governor::isCpuGovernorEnabled &&
-            (board::GetSocType() == HocClkSocType_Mariko)) {
-            u32 ramHz = gContext.freqs[HocClkModule_MEM];
-            u32 threshold = (u32)config::GetConfigValue(HocClkConfigValue_AutoRamCpuRamOCThreshold) * 1000;
-            if (ramHz >= threshold) {
-                u32 cpuOverrideHz = (u32)config::GetConfigValue(HocClkConfigValue_AutoRamCpuCpuOCFreq) * 1000;
-                if (cpuOverrideHz <= gContext.freqs[HocClkModule_CPU])
-                    return false;
-                u32 maxHz = GetMaxAllowedHz(HocClkModule_CPU, gContext.profile);
-                u32 nearestHz = GetNearestHz(HocClkModule_CPU, cpuOverrideHz, maxHz);
-                board::SetHz(HocClkModule_CPU, nearestHz);
-                gContext.freqs[HocClkModule_CPU] = nearestHz;
-                if (HocClkModule_CPU < HocClkModuleStable_EnumMax)
-                    gContext.stable.freqs[HocClkModule_CPU] = nearestHz;
-                return true;
-            }
-        }
         return false;
     }
     void HandleMiscFeatures() {
@@ -349,6 +332,54 @@ namespace clockManager {
         }
     }
 
+    u32 ClampGpuVoltage(u32 voltage) {
+        static const u32 maxGpuVoltage = board::GetSocType() == HocClkSocType_Mariko ? 960 : 995;
+        return std::min(voltage, maxGpuVoltage);
+    }
+
+    u32 GetCurrentNearestFrequency(HocClkModule module) {
+        /* Target freq may not match actual frequency so don't even bother with that. */
+        u32 hz = board::GetHz(module);
+        u32 maxHz = GetMaxAllowedHz(module, gContext.profile);
+        return GetNearestHz(module, hz, maxHz);
+    }
+
+    u32 GetNearestOverrideHz(HocClkModule module) {
+        u32 targetHz = gContext.overrideFreqs[module];
+        if (!targetHz) {
+            targetHz = config::GetAutoClockHz(gContext.applicationId, module, gContext.profile, false);
+            if (!targetHz) {
+                targetHz = config::GetAutoClockHz(HOCCLK_GLOBAL_PROFILE_TID, module, gContext.profile, false);
+            }
+        }
+
+        if (targetHz) {
+            targetHz = GetNearestHz(module, targetHz, GetMaxAllowedHz(module, gContext.profile));
+        }
+
+        return targetHz;
+    }
+
+    void ApplyGpuFreqVoltRequest(u32 voltage, u32 hz) {
+        /* Apply nothing with disabled voltage. */
+        constexpr u32 DisabledVoltage = 2000;
+        if (voltage == DisabledVoltage) {
+            notification::writeNotification("Horizon OC\nDeactivated frequency.\nReboot to apply.");
+            return;
+        }
+
+        voltage = ClampGpuVoltage(voltage);
+        u32 currentFreq = GetCurrentNearestFrequency(HocClkModule_GPU);
+        /* If not freq was provided, use the current freq. */
+        if (hz == 0) {
+            hz = currentFreq;
+        }
+
+        board::PcvHijackGpuFrequency(voltage, hz);
+        /* Update the voltage using the currently nearest valid gpu frequency. */
+        board::SetHz(HocClkModule_GPU, currentFreq);
+    }
+
     void ApplyGpuDvfs(u32 targetHz) {
         s32 dvfsOffset = config::GetConfigValue(HocClkConfigValue_DVFSOffset);
         dvfsOffset = std::max(dvfsOffset, -80);
@@ -359,19 +390,14 @@ namespace clockManager {
         }
 
         /* Prevent console from combusting if for some reason bad shit happens :P */
-        vmin = std::min(vmin, 1000u);
-
-        /* Get nearest gpu clock; we need this in a second to update the voltage. */
-        u32 gpuHz = board::GetHz(HocClkModule_GPU);
-        u32 maxHz = GetMaxAllowedHz(HocClkModule_GPU, gContext.profile);
-        u32 nearestGpuHz = GetNearestHz(HocClkModule_GPU, gpuHz, maxHz);
+        vmin = ClampGpuVoltage(vmin);
 
         /* Hijack gpu volt table. */
         board::PcvHijackGpuVolts(vmin);
 
         /* Update gpu frequency to actually use the voltage. */
         if (targetHz) {
-            board::SetHz(HocClkModule_GPU, nearestGpuHz);
+            board::SetHz(HocClkModule_GPU, GetCurrentNearestFrequency(HocClkModule_GPU));
         } else {
             /* If the target frequency is zero, we reset the frequency to ensure it gets updated even without any frequency override. */
             board::ResetToStockGpu();
@@ -383,14 +409,7 @@ namespace clockManager {
             board::PcvHijackGpuVolts(0);  // Reset to vMin
 
             u32 targetHz = gContext.overrideFreqs[HocClkModule_GPU];
-            if (!targetHz) {
-                targetHz = config::GetAutoClockHz(gContext.applicationId, HocClkModule_GPU, gContext.profile, false);
-                if (!targetHz) {
-                    targetHz = config::GetAutoClockHz(HOCCLK_GLOBAL_PROFILE_TID, HocClkModule_GPU, gContext.profile, false);
-                }
-            }
-            u32 maxHz = GetMaxAllowedHz(HocClkModule_GPU, gContext.profile);
-            u32 nearestHz = GetNearestHz(HocClkModule_GPU, targetHz, maxHz);
+            u32 nearestHz = GetNearestOverrideHz(HocClkModule_GPU);
 
             board::ResetToStockGpu();
             if (targetHz)
@@ -432,6 +451,21 @@ namespace clockManager {
         }
     }
 
+    /* Memory frequency gets reset when starting a game during boost mode, this reapplies it. */
+    void GameStartMemWar() {
+        u32 targetRamHz = GetNearestOverrideHz(HocClkModule_MEM);
+        if (!targetRamHz) {
+            return;
+        }
+
+        u32 nearestFreq = GetCurrentNearestFrequency(HocClkModule_MEM);
+
+        if (targetRamHz != nearestFreq) {
+            ApplyGpuDvfs(targetRamHz);
+            board::SetHz(HocClkModule_MEM, targetRamHz);
+        }
+    }
+
     void SetClocks(bool isBoost) {
         std::uint32_t targetHz = 0;
         std::uint32_t maxHz = 0;
@@ -443,6 +477,7 @@ namespace clockManager {
         if (skipCpuDueToBoost) {
             board::SetHz(HocClkModule_CPU, board::GetHz(HocClkModule_CPU));
             prepareBoostExit = true;
+            GameStartMemWar();
             return;  // Return if we aren't overwriting boost mode
         }
 
@@ -450,6 +485,9 @@ namespace clockManager {
             board::SetHz(HocClkModule_CPU, board::GetHz(HocClkModule_CPU));
             prepareBoostExit = false;
         }
+
+        u32 ramTargetHz = GetNearestOverrideHz(HocClkModule_MEM);
+
         bool returnRaw = false;  // Return a value scaled to MHz instead of raw value
         for (unsigned int module = 0; module < HocClkModule_EnumMax; module++) {
             u32 oldHz = board::GetHz((HocClkModule)module);  // Get Old hz (used primarily for DVFS Logic)
@@ -498,9 +536,20 @@ namespace clockManager {
             if (noGPU && module == HocClkModule_GPU)
                 continue;
 
-            if (targetHz) {
+            u32 autoCpuOcHz = 0;
+            if (module == HocClkModule_CPU && config::GetConfigValue(HocClkConfigValue_AutoRAMCPUOverclock) && !isBoost &&
+                !governor::isCpuGovernorEnabled && (board::GetSocType() == HocClkSocType_Mariko)) {
+                u32 threshold = (u32)config::GetConfigValue(HocClkConfigValue_AutoRamCpuRamOCThreshold) * 1000;
+                if (ramTargetHz >= threshold)
+                    autoCpuOcHz = (u32)config::GetConfigValue(HocClkConfigValue_AutoRamCpuCpuOCFreq) * 1000;
+            }
+
+            if (targetHz || autoCpuOcHz) {
                 maxHz = GetMaxAllowedHz((HocClkModule)module, gContext.profile);
-                nearestHz = GetNearestHz((HocClkModule)module, targetHz, maxHz);
+                nearestHz = targetHz ? GetNearestHz((HocClkModule)module, targetHz, maxHz) : 0;
+
+                if (autoCpuOcHz > nearestHz)
+                    nearestHz = GetNearestHz(HocClkModule_CPU, autoCpuOcHz, maxHz);
 
                 if (nearestHz != gContext.freqs[module]) {
                     fileUtils::LogLine("[mgr] %s clock set : %u.%u MHz (target = %u.%u MHz)", board::GetModuleName((HocClkModule)module, true),

Source/hoc-clk/sysmodule/src/mgr/clock_manager.hpp

@@ -63,6 +63,8 @@ namespace clockManager {
 
     void GetFreqList(HocClkModule module, std::uint32_t *list, std::uint32_t maxCount, std::uint32_t *outCount);
 
+    void ApplyGpuFreqVoltRequest(u32 voltage, u32 hz);
+
     void Tick();
     void WaitForNextTick();
 }  // namespace clockManager

build.sh

@@ -51,6 +51,14 @@ if [ ! -d "$ATMOSPHERE_DIR" ]; then
     echo
     echo "*** Cloning atmosphere ***"
     git clone "$ATMOSPHERE_URL" "$ATMOSPHERE_DIR"
+
+    cd "$ATMOSPHERE_DIR"
+
+    git fetch --tags --quiet
+    LATEST_TAG=$(git tag --sort=-version:refname | head -n1)
+    git checkout -q -b build "$LATEST_TAG"
+
+    cd "$ROOT_DIR"
 fi
 
 DEST="build/atmosphere/stratosphere/loader/"
@@ -75,7 +83,6 @@ if [ "$NO_EXO" -eq 0 ]; then
     cp -v "$EXO_SRC/secmon_smc_register_access.cpp"         "$EXO_DEST/"
     cp -v "$EXO_SRC/secmon_smc_handler.cpp"                 "$EXO_DEST/"
     cp -v "$EXO_SRC/secmon_memory_layout.hpp"               "$LIBEXO_DEST/"
-    echo
 fi
 
 echo
@@ -142,10 +149,13 @@ echo "*** Packaging dist.zip ***"
 cd "$DIST_DIR" || exit 1
 
 rm -f dist.zip
+rm .gitignore
 
 zip -r dist.zip . >/dev/null
 
 echo "*** dist.zip created ***"
 echo
 
+touch .gitignore
+
 cd "$ROOT_DIR" || exit 1

dist/atmosphere/contents/00FF0000636C6BFF/toolbox.json

@@ -1,5 +0,0 @@
-{
-	"name"  : "hoc-clk",
-	"tid"   : "00FF0000636C6BFF",
-	"requires_reboot": false
-}

dist/config/horizon-oc/config.ini.template

@@ -1,19 +0,0 @@
-[values]
-; Defines how often sys-clk log temperatures, in milliseconds (set 0 to disable)
-temp_log_interval_ms=0
-; Defines how often sys-clk writes to the CSV, in milliseconds (set 0 to disable)
-csv_write_interval_ms=0
-
-; Example #1: BOTW
-; Overclock CPU when docked
-; Overclock MEM to docked clocks when handheld
-;[01007EF00011E000]
-;docked_cpu=1224
-;handheld_mem=1600
-
-; Example #2: Picross
-; Underclock to save battery
-;[0100BA0003EEA000]
-;handheld_cpu=816
-;handheld_gpu=153
-;handheld_mem=800

dist/config/horizon-oc/lang/de.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Informationen",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Modul:",
-    "sys-dock status:": "Sys-Dock-Status:",
-    "SaltyNX status:": "SaltyNX-Status:",
-    "RR Display status:": "RR Anzeigestatus:",
-    "Wafer Position:": "Waferposition:",
-    "Credits": "Credits",
-    "Developers": "Entwickler",
-    "Contributors": "Mitwirkende",
-    "Testers": "Tester",
-    "Special Thanks": "Besonderer Dank",
-    "Unknown": "Unbekannt",
-    "Installed": "Installiert",
-    "Not Installed": "Nicht installiert",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "DIE BIERWAREN-LIZENZ",
-    "Default": "Standard",
-    "Do Not Override": "Nicht überschreiben",
-    "Disabled": "Deaktiviert",
-    "Enabled": "Aktiviert",
-    " \\ue0e3 Reset": "\\ue0e3 Zurücksetzen",
-    "Display": "Anzeige",
-    "Application changed\\n\\n": "Anwendung geändert\\n\\n",
-    "The running application changed\\n\\n": "Die laufende Anwendung hat sich geändert\\n\\n",
-    "while editing was going on.": "während die Bearbeitung im Gange war.",
-    "Board": "Vorstand",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Es konnte keine Verbindung zum hoc-clk-Systemmodul hergestellt werden.\\n\\n",
-    "Please make sure everything is\\n\\n": "Bitte stellen Sie sicher, dass alles in Ordnung ist\\n\\n",
-    "correctly installed and enabled.": "korrekt installiert und aktiviert.",
-    "Fatal error": "Fataler Fehler",
-    "Temporary Overrides ": "Temporäre Überschreibungen",
-    "Sleep Mode": "Schlafmodus",
-    "Stock": "Lager",
-    "Dev OC": "Entwickler OC",
-    "Boost Mode": "Boost-Modus",
-    "Safe Max": "Sicher max",
-    "Unsafe Max": "Unsicher max",
-    "Absolute Max": "Absolutes Maximum",
-    "Handheld Safe Max": "Handsafe max",
-    "Enable": "Aktivieren",
-    "Edit App Profile": "App-Profil bearbeiten",
-    "Edit Global Profile": "Globales Profil bearbeiten",
-    "Temporary Overrides": "Temporäre Überschreibungen",
-    "Settings": "Einstellungen",
-    "About": "Über",
-    "Compiling with minimal features": "Kompilieren mit minimalen Funktionen",
-    "General Settings": "Allgemeine Einstellungen",
-    "Governor Settings": "Gouverneurseinstellungen",
-    "Safety Settings": "Sicherheitseinstellungen",
-    "Save KIP Settings": "Speichern Sie die KIP-Einstellungen",
-    "RAM Settings": "RAM-Einstellungen",
-    "CPU Settings": "CPU-Einstellungen",
-    "GPU Settings": "GPU-Einstellungen",
-    "Display Settings": "Anzeigeeinstellungen",
-    "Experimental": "Experimentell",
-    "GPU Scheduling Override Method": "GPU-Planungsüberschreibungsmethode",
-    "can be dangerous and may cause": "kann gefährlich sein und verursachen",
-    "damage to your battery or charger!": "Schäden an Ihrem Akku oder Ladegerät!",
-    "Charge Current Override": "Ladestrom-Überbrückung",
-    "RAM Voltage Display Mode": "RAM-Spannungsanzeigemodus",
-    "Polling Interval": "Abfrageintervall",
-    "CPU Governor Minimum Frequency": "Mindestfrequenz des CPU-Reglers",
-    "refresh rates may cause stress": "Bildwiederholraten können Stress verursachen",
-    "or damage to your display! ": "oder Schäden an Ihrem Display!",
-    "Proceed at your own risk!": "Das Vorgehen erfolgt auf eigene Gefahr!",
-    "Max Handheld Display": "Max Handheld-Display",
-    "Display Clock": "Uhr anzeigen",
-    "Official Rating": "Offizielle Bewertung",
-    "TDP Threshold": "TDP-Schwellenwert",
-    "Power": "Macht",
-    "Thermal Throttle Limit": "Thermische Drosselgrenze",
-    "HP Mode": "HP-Modus",
-    "Default (Mariko)": "Standard (Mariko)",
-    "Default (Erista)": "Standard (Erista)",
-    "Rating": "Bewertung",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
-    "RAM VDD2 Voltage": "RAM VDD2 Spannung",
-    "Voltage": "Spannung",
-    "RAM VDDQ Voltage": "RAM-VDDQ-Spannung",
-    "RAM Frequency Editor": "RAM-Frequenzeditor",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Hoher Tacho erforderlich!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (Benötigt extremen Tacho/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (Benötigt extremen Tacho/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (Benötigt extremen Tacho/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (Benötigt lächerlichen Tacho/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (Benötigt lächerlichen Tacho/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (Benötigt lächerlichen Tacho/PLL)",
-    "Ram Max Clock": "Ram Max Uhr",
-    "RAM Latency Editor": "RAM-Latenz-Editor",
-    "RAM Timing Reductions": "Reduzierung des RAM-Timings",
-    "Memory Timings": "Speicherzeiten",
-    "Advanced": "Fortgeschritten",
-    "t6 tRTW Fine Tune": "t6 tRTW Feinabstimmung",
-    "tRTW Fine Tune": "tRTW-Feinabstimmung",
-    "t7 tWTR Fine Tune": "t7 tWTR Feinabstimmung",
-    "tWTR Fine Tune": "tWTR-Feinabstimmung",
-    "Memory Latencies": "Speicherlatenzen",
-    "Read Latency": "Leselatenz",
-    "Write Latency": "Schreiblatenz",
-    "CPU Boost Clock": "CPU-Boost-Takt",
-    "CPU UV": "CPU-UV",
-    "CPU Unlock": "CPU-Entsperrung",
-    "CPU VMIN": "CPU-VMIN",
-    "CPU Max Voltage": "Maximale CPU-Spannung",
-    "CPU Max Clock": "Maximaler CPU-Takt",
-    "Extreme UV Table": "Extremer UV-Tisch",
-    "CPU UV Table": "CPU-UV-Tisch",
-    "CPU Low UV": "CPU-niedrige UV-Strahlung",
-    "CPU High UV": "CPU Hohe UV-Strahlung",
-    "CPU Low VMIN": "CPU niedrig VMIN",
-    "CPU High VMIN": "CPU hoch VMIN",
-    "No Undervolt": "Kein Undervolt",
-    "SLT Table": "SLT-Tisch",
-    "HiOPT Table": "HiOPT-Tabelle",
-    "GPU Undervolt Table": "GPU-Unterspannungstabelle",
-    "GPU Minimum Voltage": "GPU-Mindestspannung",
-    "Calculate GPU Vmin": "Berechnen Sie die GPU-Vmin",
-    "GPU VMIN": "GPU-VMIN",
-    "GPU Maximum Voltage": "Maximale GPU-Spannung",
-    "GPU Voltage Offset": "GPU-Spannungsoffset",
-    "Do not override": "Nicht überschreiben",
-    "Enabled (Default)": "Aktiviert (Standard)",
-    "96.6% limit": "96,6 %-Grenze",
-    "99.7% limit": "99,7 %-Grenze",
-    "GPU Scheduling Override": "GPU-Planungsüberschreibung",
-    "Official Service": "Offizieller Dienst",
-    "GPU DVFS Mode": "GPU-DVFS-Modus",
-    "GPU DVFS Offset": "GPU-DVFS-Offset",
-    "GPU Voltage Table": "GPU-Spannungstabelle",
-    "GPU Custom Table (mV)": "Benutzerdefinierte GPU-Tabelle (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz ohne UV, 1152 MHz auf SLT",
-    "or 1228MHz on HiOPT can cause ": "oder 1228 MHz auf HiOPT kann dazu führen",
-    "permanent damage to your Switch!": "Dauerhafter Schaden an Ihrem Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz ohne UV und 960 MHz eingeschaltet",
-    "SLT or HiOPT can cause ": "SLT oder HiOPT können dazu führen"
-}

dist/config/horizon-oc/lang/en.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Information",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module: ",
-    "sys-dock status:": "sys-dock status:",
-    "SaltyNX status:": "SaltyNX status:",
-    "RR Display status:": "RR Display status:",
-    "Wafer Position:": "Wafer Position:",
-    "Credits": "Credits",
-    "Developers": "Developers",
-    "Contributors": "Contributors",
-    "Testers": "Testers",
-    "Special Thanks": "Special Thanks",
-    "Unknown": "Unknown",
-    "Installed": "Installed",
-    "Not Installed": "Not Installed",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE",
-    "Default": "Default",
-    "Do Not Override": "Do Not Override",
-    "Disabled": "Disabled",
-    "Enabled": "Enabled",
-    " \\ue0e3 Reset": " \\ue0e3 Reset",
-    "Display": "Display",
-    "Application changed\\n\\n": "Application changed\\n\\n",
-    "The running application changed\\n\\n": "The running application changed\\n\\n",
-    "while editing was going on.": "while editing was going on.",
-    "Board": "Board",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Could not connect to hoc-clk sysmodule.\\n\\n",
-    "Please make sure everything is\\n\\n": "Please make sure everything is\\n\\n",
-    "correctly installed and enabled.": "correctly installed and enabled.",
-    "Fatal error": "Fatal error",
-    "Temporary Overrides ": "Temporary Overrides ",
-    "Sleep Mode": "Sleep Mode",
-    "Stock": "Stock",
-    "Dev OC": "Dev OC",
-    "Boost Mode": "Boost Mode",
-    "Safe Max": "Safe Max",
-    "Unsafe Max": "Unsafe Max",
-    "Absolute Max": "Absolute Max",
-    "Handheld Safe Max": "Handheld Safe Max",
-    "Enable": "Enable",
-    "Edit App Profile": "Edit App Profile",
-    "Edit Global Profile": "Edit Global Profile",
-    "Temporary Overrides": "Temporary Overrides",
-    "Settings": "Settings",
-    "About": "About",
-    "Compiling with minimal features": "Compiling with minimal features",
-    "General Settings": "General Settings",
-    "Governor Settings": "Governor Settings",
-    "Safety Settings": "Safety Settings",
-    "Save KIP Settings": "Save KIP Settings",
-    "RAM Settings": "RAM Settings",
-    "CPU Settings": "CPU Settings",
-    "GPU Settings": "GPU Settings",
-    "Display Settings": "Display Settings",
-    "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "GPU Scheduling Override Method",
-    "can be dangerous and may cause": "can be dangerous and may cause",
-    "damage to your battery or charger!": "damage to your battery or charger!",
-    "Charge Current Override": "Charge Current Override",
-    "RAM Voltage Display Mode": "RAM Voltage Display Mode",
-    "Polling Interval": "Polling Interval",
-    "CPU Governor Minimum Frequency": "CPU Governor Minimum Frequency",
-    "refresh rates may cause stress": "refresh rates may cause stress",
-    "or damage to your display! ": "or damage to your display! ",
-    "Proceed at your own risk!": "Proceed at your own risk!",
-    "Max Handheld Display": "Max Handheld Display",
-    "Display Clock": "Display Clock",
-    "Official Rating": "Official Rating",
-    "TDP Threshold": "TDP Threshold",
-    "Power": "Power",
-    "Thermal Throttle Limit": "Thermal Throttle Limit",
-    "HP Mode": "HP Mode",
-    "Default (Mariko)": "Default (Mariko)",
-    "Default (Erista)": "Default (Erista)",
-    "Rating": "Rating",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
-    "RAM VDD2 Voltage": "RAM VDD2 Voltage",
-    "Voltage": "Voltage",
-    "RAM VDDQ Voltage": "RAM VDDQ Voltage",
-    "RAM Frequency Editor": "RAM Frequency Editor",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "High speedo needed!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Needs extreme Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Needs extreme Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Needs extreme Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Needs ridiculous Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Needs ridiculous Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Needs ridiculous Speedo/PLL)",
-    "Ram Max Clock": "Ram Max Clock",
-    "RAM Latency Editor": "RAM Latency Editor",
-    "RAM Timing Reductions": "RAM Timing Reductions",
-    "Memory Timings": "Memory Timings",
-    "Advanced": "Advanced",
-    "t6 tRTW Fine Tune": "t6 tRTW Fine Tune",
-    "tRTW Fine Tune": "tRTW Fine Tune",
-    "t7 tWTR Fine Tune": "t7 tWTR Fine Tune",
-    "tWTR Fine Tune": "tWTR Fine Tune",
-    "Memory Latencies": "Memory Latencies",
-    "Read Latency": "Read Latency",
-    "Write Latency": "Write Latency",
-    "CPU Boost Clock": "CPU Boost Clock",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "CPU Unlock",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU Max Voltage",
-    "CPU Max Clock": "CPU Max Clock",
-    "Extreme UV Table": "Extreme UV Table",
-    "CPU UV Table": "CPU UV Table",
-    "CPU Low UV": "CPU Low UV",
-    "CPU High UV": "CPU High UV",
-    "CPU Low VMIN": "CPU Low VMIN",
-    "CPU High VMIN": "CPU High VMIN",
-    "No Undervolt": "No Undervolt",
-    "SLT Table": "SLT Table",
-    "HiOPT Table": "HiOPT Table",
-    "GPU Undervolt Table": "GPU Undervolt Table",
-    "GPU Minimum Voltage": "GPU Minimum Voltage",
-    "Calculate GPU Vmin": "Calculate GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU Maximum Voltage",
-    "GPU Voltage Offset": "GPU Voltage Offset",
-    "Do not override": "Do not override",
-    "Enabled (Default)": "Enabled (Default)",
-    "96.6% limit": "96.6% limit",
-    "99.7% limit": "99.7% limit",
-    "GPU Scheduling Override": "GPU Scheduling Override",
-    "Official Service": "Official Service",
-    "GPU DVFS Mode": "GPU DVFS Mode",
-    "GPU DVFS Offset": "GPU DVFS Offset",
-    "GPU Voltage Table": "GPU Voltage Table",
-    "GPU Custom Table (mV)": "GPU Custom Table (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz without UV, 1152MHz on SLT",
-    "or 1228MHz on HiOPT can cause ": "or 1228MHz on HiOPT can cause ",
-    "permanent damage to your Switch!": "permanent damage to your Switch!",
-    "921MHz without UV and 960MHz on": "921MHz without UV and 960MHz on",
-    "SLT or HiOPT can cause ": "SLT or HiOPT can cause "
-}

dist/config/horizon-oc/lang/es.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Información",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Módulo:",
-    "sys-dock status:": "Estado de sys-dock:",
-    "SaltyNX status:": "Estado de SaltyNX:",
-    "RR Display status:": "Estado de pantalla RR:",
-    "Wafer Position:": "Posición del wafer:",
-    "Credits": "Créditos",
-    "Developers": "Desarrolladores",
-    "Contributors": "Colaboradores",
-    "Testers": "Testers",
-    "Special Thanks": "Agradecimientos especiales",
-    "Unknown": "Desconocido",
-    "Installed": "Instalado",
-    "Not Installed": "No instalado",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "LICENCIA BEER-WARE",
-    "Default": "Predeterminado",
-    "Do Not Override": "No sobrescribir",
-    "Disabled": "Desactivado",
-    "Enabled": "Activado",
-    " \\ue0e3 Reset": "\\ue0e3 Restablecer",
-    "Display": "Pantalla",
-    "Application changed\\n\\n": "Aplicación cambiada\\n\\n",
-    "The running application changed\\n\\n": "La aplicación en ejecución ha cambiado\\n\\n",
-    "while editing was going on.": "mientras se estaba editando.",
-    "Board": "Placa",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Asegúrate de que todo esté\\n\\n",
-    "correctly installed and enabled.": "correctamente instalado y activado.",
-    "Fatal error": "Error fatal",
-    "Temporary Overrides ": "Ajustes temporales",
-    "Sleep Mode": "Modo reposo",
-    "Stock": "Valores de fábrica",
-    "Dev OC": "OC de desarrollo",
-    "Boost Mode": "Modo boost",
-    "Safe Max": "Máximo seguro",
-    "Unsafe Max": "Máximo no seguro",
-    "Absolute Max": "Máximo absoluto",
-    "Handheld Safe Max": "Máximo seguro en portátil",
-    "Enable": "Activar",
-    "Edit App Profile": "Editar perfil de aplicación",
-    "Edit Global Profile": "Editar perfil global",
-    "Temporary Overrides": "Ajustes temporales",
-    "Settings": "Configuración",
-    "About": "Acerca de",
-    "Compiling with minimal features": "Compilado con funciones mínimas",
-    "General Settings": "Configuración general",
-    "Governor Settings": "Configuración del governor",
-    "Safety Settings": "Configuración de seguridad",
-    "Save KIP Settings": "Guardar configuración KIP",
-    "RAM Settings": "Configuración de RAM",
-    "CPU Settings": "Configuración de CPU",
-    "GPU Settings": "Configuración de GPU",
-    "Display Settings": "Configuración de pantalla",
-    "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "Método de sobrescritura del scheduling de GPU",
-    "can be dangerous and may cause": "puede ser peligroso y causar",
-    "damage to your battery or charger!": "daños a la batería o al cargador.",
-    "Charge Current Override": "Sobrescritura de corriente de carga",
-    "RAM Voltage Display Mode": "Modo de visualización de voltaje de RAM",
-    "Polling Interval": "Intervalo de sondeo",
-    "CPU Governor Minimum Frequency": "Frecuencia mínima del governor de CPU",
-    "refresh rates may cause stress": "las tasas de refresco pueden causar estrés",
-    "or damage to your display! ": "o dañar la pantalla.",
-    "Proceed at your own risk!": "¡Úsalo bajo tu propio riesgo!",
-    "Max Handheld Display": "Frecuencia máxima de pantalla en portátil",
-    "Display Clock": "Frecuencia de pantalla",
-    "Official Rating": "Valor oficial",
-    "TDP Threshold": "Umbral de TDP",
-    "Power": "Potencia",
-    "Thermal Throttle Limit": "Límite de thermal throttling",
-    "HP Mode": "Modo alto rendimiento",
-    "Default (Mariko)": "Predeterminado (Mariko)",
-    "Default (Erista)": "Predeterminado (Erista)",
-    "Rating": "Valor",
-    "Safe Max (Mariko)": "Máximo seguro (Mariko)",
-    "Safe Max (Erista)": "Máximo seguro (Erista)",
-    "RAM VDD2 Voltage": "Voltaje VDD2 de RAM",
-    "Voltage": "Voltaje",
-    "RAM VDDQ Voltage": "Voltaje VDDQ de RAM",
-    "RAM Frequency Editor": "Editor de frecuencia de RAM",
-    "JEDEC.": "JEDEC",
-    "High speedo needed!": "¡Se necesita alto speedo!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (requiere Speedo/PLL extremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (requiere Speedo/PLL extremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (requiere Speedo/PLL extremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (requiere Speedo/PLL muy alto)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (requiere Speedo/PLL muy alto)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (requiere Speedo/PLL muy alto)",
-    "Ram Max Clock": "Frecuencia máxima de RAM",
-    "RAM Latency Editor": "Editor de latencias de RAM",
-    "RAM Timing Reductions": "Reducción de timings de RAM",
-    "Memory Timings": "Timings de memoria",
-    "Advanced": "Avanzado",
-    "t6 tRTW Fine Tune": "Ajuste fino t6 tRTW",
-    "tRTW Fine Tune": "Ajuste fino tRTW",
-    "t7 tWTR Fine Tune": "Ajuste fino t7 tWTR",
-    "tWTR Fine Tune": "Ajuste fino tWTR",
-    "Memory Latencies": "Latencias de memoria",
-    "Read Latency": "Latencia de lectura",
-    "Write Latency": "Latencia de escritura",
-    "CPU Boost Clock": "Frecuencia boost de CPU",
-    "CPU UV": "Undervolt de CPU",
-    "CPU Unlock": "Desbloqueo de CPU",
-    "CPU VMIN": "VMIN de CPU",
-    "CPU Max Voltage": "Voltaje máximo de CPU",
-    "CPU Max Clock": "Frecuencia máxima de CPU",
-    "Extreme UV Table": "Tabla de undervolt extrema",
-    "CPU UV Table": "Tabla de undervolt de CPU",
-    "CPU Low UV": "Undervolt bajo de CPU",
-    "CPU High UV": "Undervolt alto de CPU",
-    "CPU Low VMIN": "VMIN bajo de CPU",
-    "CPU High VMIN": "VMIN alto de CPU",
-    "No Undervolt": "Sin undervolt",
-    "SLT Table": "Tabla SLT",
-    "HiOPT Table": "Tabla HiOPT",
-    "GPU Undervolt Table": "Tabla de undervolt de GPU",
-    "GPU Minimum Voltage": "Voltaje mínimo de GPU",
-    "Calculate GPU Vmin": "Calcular Vmin de GPU",
-    "GPU VMIN": "VMIN de GPU",
-    "GPU Maximum Voltage": "Voltaje máximo de GPU",
-    "GPU Voltage Offset": "Offset de voltaje de GPU",
-    "Do not override": "No sobrescribir",
-    "Enabled (Default)": "Activado (predeterminado)",
-    "96.6% limit": "Límite 96,6%",
-    "99.7% limit": "Límite 99,7%",
-    "GPU Scheduling Override": "Sobrescritura de scheduling de GPU",
-    "Official Service": "Servicio oficial",
-    "GPU DVFS Mode": "Modo DVFS de GPU",
-    "GPU DVFS Offset": "Offset DVFS de GPU",
-    "GPU Voltage Table": "Tabla de voltaje de GPU",
-    "GPU Custom Table (mV)": "Tabla personalizada de GPU (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz sin undervolt, 1152MHz en SLT",
-    "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar ",
-    "permanent damage to your Switch!": "¡daño permanente a tu Switch!",
-    "921MHz without UV and 960MHz on": "921MHz sin undervolt y 960MHz en",
-    "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar "
-}

dist/config/horizon-oc/lang/fr.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Informations",
-    "IDDQ:": "IDDQ :",
-    "Module: ": "Module :",
-    "sys-dock status:": "Statut de sys-dock :",
-    "SaltyNX status:": "Statut de SaltyNX :",
-    "RR Display status:": "Statut de l'affichage RR :",
-    "Wafer Position:": "Position du wafer :",
-    "Credits": "Crédits",
-    "Developers": "Développeurs",
-    "Contributors": "Contributeurs",
-    "Testers": "Testeurs",
-    "Special Thanks": "Remerciements spéciaux",
-    "Unknown": "Inconnu",
-    "Installed": "Installé",
-    "Not Installed": "Non installé",
-    "X: %u Y: %u": "X : %u Y : %u",
-    "THE BEER-WARE LICENSE": "LA LICENCE BEER-WARE",
-    "Default": "Par défaut",
-    "Do Not Override": "Ne pas remplacer",
-    "Disabled": "Désactivé",
-    "Enabled": "Activé",
-    " \\ue0e3 Reset": "\\ue0e3 Réinitialiser",
-    "Display": "Écran",
-    "Application changed\\n\\n": "Application modifiée\\n\\n",
-    "The running application changed\\n\\n": "L'application en cours d'exécution a changé\\n\\n",
-    "while editing was going on.": "pendant la modification.",
-    "Board": "Carte",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Veuillez vous assurer que tout est\\n\\n",
-    "correctly installed and enabled.": "correctement installé et activé.",
-    "Fatal error": "Erreur fatale",
-    "Temporary Overrides ": "Forçages temporaires ",
-    "Sleep Mode": "Mode veille",
-    "Stock": "D'origine",
-    "Dev OC": "OC Développeur",
-    "Boost Mode": "Mode Boost",
-    "Safe Max": "Max sûr",
-    "Unsafe Max": "Max non sûr",
-    "Absolute Max": "Max absolu",
-    "Handheld Safe Max": "Max sûr (mode portable)",
-    "Enable": "Activer",
-    "Edit App Profile": "Modifier le profil de l'app",
-    "Edit Global Profile": "Modifier le profil global",
-    "Temporary Overrides": "Forçages temporaires",
-    "Settings": "Paramètres",
-    "About": "À propos",
-    "Compiling with minimal features": "Compilation avec fonctionnalités minimales",
-    "General Settings": "Paramètres généraux",
-    "Governor Settings": "Paramètres du gouverneur",
-    "Safety Settings": "Paramètres de sécurité",
-    "Save KIP Settings": "Enregistrer les paramètres KIP",
-    "RAM Settings": "Paramètres RAM",
-    "CPU Settings": "Paramètres CPU",
-    "GPU Settings": "Paramètres GPU",
-    "Display Settings": "Paramètres d'affichage",
-    "Experimental": "Expérimental",
-    "GPU Scheduling Override Method": "Méthode de Forçage de l'ordonnancement GPU",
-    "can be dangerous and may cause": "peut être dangereux et causer des",
-    "damage to your battery or charger!": "dommages à votre batterie ou chargeur !",
-    "Charge Current Override": "Forçage du courant de charge",
-    "RAM Voltage Display Mode": "Mode d'affichage de la tension RAM",
-    "Polling Interval": "Intervalle d'interrogation",
-    "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur CPU",
-    "refresh rates may cause stress": "les taux de rafraîchissement peuvent stresser",
-    "or damage to your display! ": "ou endommager votre écran !",
-    "Proceed at your own risk!": "À utiliser à vos propres risques !",
-    "Max Handheld Display": "Affichage portable max",
-    "Display Clock": "Fréquence d'affichage",
-    "Official Rating": "Classement officiel",
-    "TDP Threshold": "Seuil TDP",
-    "Power": "Alimentation",
-    "Thermal Throttle Limit": "Limite d'étranglement thermique",
-    "HP Mode": "Mode HP",
-    "Default (Mariko)": "Par défaut (Mariko)",
-    "Default (Erista)": "Par défaut (Erista)",
-    "Rating": "Évaluation",
-    "Safe Max (Mariko)": "Max sûr (Mariko)",
-    "Safe Max (Erista)": "Max sûr (Erista)",
-    "RAM VDD2 Voltage": "Tension RAM VDD2",
-    "Voltage": "Tension",
-    "RAM VDDQ Voltage": "Tension RAM VDDQ",
-    "RAM Frequency Editor": "Éditeur de fréquence RAM",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Speedo élevé requis !",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite Speedo/PLL extrême)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite Speedo/PLL extrême)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite Speedo/PLL extrême)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite Speedo/PLL ridicule)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite Speedo/PLL ridicule)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite Speedo/PLL ridicule)",
-    "Ram Max Clock": "Fréquence RAM max",
-    "RAM Latency Editor": "Éditeur de latence RAM",
-    "RAM Timing Reductions": "Réductions des timings RAM",
-    "Memory Timings": "Timings mémoire",
-    "Advanced": "Avancé",
-    "t6 tRTW Fine Tune": "Ajustement précis t6 tRTW",
-    "tRTW Fine Tune": "Ajustement précis tRTW",
-    "t7 tWTR Fine Tune": "Ajustement précis t7 tWTR",
-    "tWTR Fine Tune": "Ajustement précis tWTR",
-    "Memory Latencies": "Latences mémoire",
-    "Read Latency": "Latence de lecture",
-    "Write Latency": "Latence d'écriture",
-    "CPU Boost Clock": "Fréquence Boost CPU",
-    "CPU UV": "UV CPU",
-    "CPU Unlock": "Déverrouillage CPU",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Tension CPU max",
-    "CPU Max Clock": "Fréquence CPU max",
-    "Extreme UV Table": "Table d'UV extrême",
-    "CPU UV Table": "Table d'UV CPU",
-    "CPU Low UV": "UV CPU faible",
-    "CPU High UV": "UV CPU élevé",
-    "CPU Low VMIN": "VMIN CPU faible",
-    "CPU High VMIN": "VMIN CPU élevé",
-    "No Undervolt": "Aucun Undervolt",
-    "SLT Table": "Table SLT",
-    "HiOPT Table": "Table HiOPT",
-    "GPU Undervolt Table": "Table d'undervolt GPU",
-    "GPU Minimum Voltage": "Tension GPU minimale",
-    "Calculate GPU Vmin": "Calculer Vmin GPU",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Tension GPU maximale",
-    "GPU Voltage Offset": "Offset de tension GPU",
-    "Do not override": "Ne pas remplacer",
-    "Enabled (Default)": "Activé (par défaut)",
-    "96.6% limit": "Limite de 96,6 %",
-    "99.7% limit": "Limite de 99,7 %",
-    "GPU Scheduling Override": "Forçage de l'ordonnancement GPU",
-    "Official Service": "Service officiel",
-    "GPU DVFS Mode": "Mode GPU DVFS",
-    "GPU DVFS Offset": "Offset GPU DVFS",
-    "GPU Voltage Table": "Table de tension GPU",
-    "GPU Custom Table (mV)": "Table de GPU personnalisée (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz sans UV, 1152 MHz sur SLT",
-    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut causer des",
-    "permanent damage to your Switch!": "dommages permanents à votre Switch !",
-    "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz sur",
-    "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent causer des"
-}

dist/config/horizon-oc/lang/it.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Informazioni",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Modulo:",
-    "sys-dock status:": "stato di sys-dock",
-    "SaltyNX status:": "Stato di SaltyNX:",
-    "RR Display status:": "Stato del RR:",
-    "Wafer Position:": "Posizione nel Wafer:",
-    "Credits": "Crediti",
-    "Developers": "Sviluppatori",
-    "Contributors": "Collaboratori",
-    "Testers": "Tester",
-    "Special Thanks": "Un Ringraziamento Speciale",
-    "Unknown": "Sconosciuto",
-    "Installed": "Installato",
-    "Not Installed": "Non installato",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE",
-    "Default": "Predefinito",
-    "Do Not Override": "Non Sovrascrivere",
-    "Disabled": "Disabilitato",
-    "Enabled": "Abilitato",
-    " \\ue0e3 Reset": "\\ue0e3 Ripristina",
-    "Display": "Schermo",
-    "Application changed\\n\\n": "Applicazione modificata\\n\\n",
-    "The running application changed\\n\\n": "L'applicazione in esecuzione è cambiata\\n\\n",
-    "while editing was going on.": "mentre era in corso la modifica.",
-    "Board": "Scheda",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n",
-    "correctly installed and enabled.": "correttamente installato e abilitato.",
-    "Fatal error": "Errore fatale",
-    "Temporary Overrides ": "Sostituzioni Temporanee",
-    "Sleep Mode": "Modalità di Sospensione",
-    "Stock": "Originale",
-    "Dev OC": "OC dev",
-    "Boost Mode": "Modalità Boost",
-    "Safe Max": "Massimo Sicuro",
-    "Unsafe Max": "Massimo Non Sicuro",
-    "Absolute Max": "Massimo Assoluto",
-    "Handheld Safe Max": "Massimo Sicuro Modalità Portatile",
-    "Enable": "Abilita",
-    "Edit App Profile": "Modifica Profilo Dell'App",
-    "Edit Global Profile": "Modifica Profilo Globale",
-    "Temporary Overrides": "Sostituzioni Temporanee",
-    "Settings": "Impostazioni",
-    "About": "A Riguardo Di",
-    "Compiling with minimal features": "Compilazione con funzionalità minime",
-    "General Settings": "Impostazioni Generali",
-    "Governor Settings": "Impostazioni Del Governor",
-    "Safety Settings": "Impostazioni Di Sicurezza",
-    "Save KIP Settings": "Salva le impostazioni del KIP",
-    "RAM Settings": "Impostazioni della RAM",
-    "CPU Settings": "Impostazioni della CPU",
-    "GPU Settings": "Impostazioni della GPU",
-    "Display Settings": "Impostazioni dello Schermo",
-    "Experimental": "Sperimentale",
-    "GPU Scheduling Override Method": "Metodo di override dello scheduling GPU",
-    "can be dangerous and may cause": "può essere pericoloso e può causare",
-    "damage to your battery or charger!": "danni alla batteria o al caricabatterie!",
-    "Charge Current Override": "Override della Corrente di Carica",
-    "RAM Voltage Display Mode": "Modalità di Visualizzazione della Tensione RAM",
-    "Polling Interval": "Intervallo di polling",
-    "CPU Governor Minimum Frequency": "Frequenza minima del Governor della CPU",
-    "refresh rates may cause stress": "le frequenze di aggiornamento possono causare stress",
-    "or damage to your display! ": "o danni al display!",
-    "Proceed at your own risk!": "Procedi a tuo rischio e pericolo!",
-    "Max Handheld Display": "Display Massimo in Modalità Portatile",
-    "Display Clock": "Frequenza del Display",
-    "Official Rating": "Rating Ufficiale",
-    "TDP Threshold": "Soglia TDP",
-    "Power": "Potenza",
-    "Thermal Throttle Limit": "Limite Termico",
-    "HP Mode": "Modalità HP",
-    "Default (Mariko)": "Predefinito (Mariko)",
-    "Default (Erista)": "Predefinito (Erista)",
-    "Rating": "Valutazione",
-    "Safe Max (Mariko)": "Massimo Sicuro (Mariko)",
-    "Safe Max (Erista)": "Massimo Sicuro (Erista)",
-    "RAM VDD2 Voltage": "Tensione RAM VDD2",
-    "Voltage": "Voltaggio",
-    "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM",
-    "RAM Frequency Editor": "Editor della frequenza RAM",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Alto Valore Speedo Necessario!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL altissimo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL altissimo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL altissimo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (richiede Speedo/PLL estremo)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (richiede Speedo/PLL estremo)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (richiede Speedo/PLL estremo)",
-    "Ram Max Clock": "Frequenza Massima Ram",
-    "RAM Latency Editor": "Editor della Latenza RAM",
-    "RAM Timing Reductions": "Riduzioni dei Timing della RAM",
-    "Memory Timings": "Timing di Memoria",
-    "Advanced": "Avanzato",
-    "t6 tRTW Fine Tune": "Regolazione Fine t6 tRTW",
-    "tRTW Fine Tune": "Regolazione Fine tRTW",
-    "t7 tWTR Fine Tune": "Regolazione Fine t7 tWTR",
-    "tWTR Fine Tune": "Regolazione Fine tWTR",
-    "Memory Latencies": "Latenza della Memoria",
-    "Read Latency": "Latenza di Lettura",
-    "Write Latency": "Latenza di Scrittura",
-    "CPU Boost Clock": "Frequenza CPU in Boost",
-    "CPU UV": "Undervolt CPU",
-    "CPU Unlock": "Sblocco della CPU",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Voltaggio massimo della CPU",
-    "CPU Max Clock": "Frequenza massima della CPU",
-    "Extreme UV Table": "Tabella UV estremo",
-    "CPU UV Table": "Tabella UV della CPU",
-    "CPU Low UV": "CPU UV Bassa Frequenza",
-    "CPU High UV": "CPU UV Alta Frequenza",
-    "CPU Low VMIN": "CPU VMIN Bassa Frequenza",
-    "CPU High VMIN": "CPU VMIN Alta Frequenza",
-    "No Undervolt": "Nessun Undervolt",
-    "SLT Table": "Tabella SLT",
-    "HiOPT Table": "Tabella HiOPT",
-    "GPU Undervolt Table": "Tabella di Undervolt GPU",
-    "GPU Minimum Voltage": "Voltaggio Minimo della GPU",
-    "Calculate GPU Vmin": "Calcola GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Voltaggio massimo della GPU",
-    "GPU Voltage Offset": "Offset di Voltaggio della GPU",
-    "Do not override": "Non sovrascrivere",
-    "Enabled (Default)": "Abilitato (impostazione predefinita)",
-    "96.6% limit": "Limite del 96,6%.",
-    "99.7% limit": "Limite del 99,7%.",
-    "GPU Scheduling Override": "Override dello Scheduling GPU",
-    "Official Service": "Servizio ufficiale",
-    "GPU DVFS Mode": "Modalità DVFS GPU",
-    "GPU DVFS Offset": "Offset DVFS della GPU",
-    "GPU Voltage Table": "Tabella delle Tensioni della GPU",
-    "GPU Custom Table (mV)": "Tabella GPU Personalizzata (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT",
-    "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare",
-    "permanent damage to your Switch!": "danni permanenti alla tua Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz su",
-    "SLT or HiOPT can cause ": "SLT o HiOPT possono causare"
-}

dist/config/horizon-oc/lang/ja.json

@@ -1,141 +0,0 @@
-{
-    "Information": "情報",
-    "IDDQ:": "IDQ:",
-    "Module: ": "モジュール:",
-    "sys-dock status:": "システムドックのステータス:",
-    "SaltyNX status:": "SaltyNX ステータス:",
-    "RR Display status:": "RR 表示ステータス:",
-    "Wafer Position:": "ウェーハの位置:",
-    "Credits": "クレジット",
-    "Developers": "開発者",
-    "Contributors": "貢献者",
-    "Testers": "テスター",
-    "Special Thanks": "特別な感謝の気持ち",
-    "Unknown": "不明",
-    "Installed": "インストール済み",
-    "Not Installed": "インストールされていません",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "ビール製品ライセンス",
-    "Default": "デフォルト",
-    "Do Not Override": "上書きしないでください",
-    "Disabled": "障害者",
-    "Enabled": "有効",
-    " \\ue0e3 Reset": "\\ue0e3 リセット",
-    "Display": "ディスプレイ",
-    "Application changed\\n\\n": "アプリケーションが変更されました\\n\\n",
-    "The running application changed\\n\\n": "実行中のアプリケーションが変更されました\\n\\n",
-    "while editing was going on.": "編集を進めている最中でした。",
-    "Board": "理事会",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk sysmodule に接続できませんでした。\\n\\n",
-    "Please make sure everything is\\n\\n": "すべてが正しいことを確認してください\\n\\n",
-    "correctly installed and enabled.": "正しくインストールされ、有効になっています。",
-    "Fatal error": "致命的なエラー",
-    "Temporary Overrides ": "一時的なオーバーライド",
-    "Sleep Mode": "スリープモード",
-    "Stock": "在庫",
-    "Dev OC": "開発OC",
-    "Boost Mode": "ブーストモード",
-    "Safe Max": "セーフマックス",
-    "Unsafe Max": "危険なマックス",
-    "Absolute Max": "絶対最大値",
-    "Handheld Safe Max": "手持ち金庫マックス",
-    "Enable": "有効にする",
-    "Edit App Profile": "アプリプロファイルの編集",
-    "Edit Global Profile": "グローバルプロファイルの編集",
-    "Temporary Overrides": "一時的なオーバーライド",
-    "Settings": "設定",
-    "About": "について",
-    "Compiling with minimal features": "最小限の機能でコンパイルする",
-    "General Settings": "一般設定",
-    "Governor Settings": "ガバナーの設定",
-    "Safety Settings": "安全設定",
-    "Save KIP Settings": "KIP 設定の保存",
-    "RAM Settings": "RAM設定",
-    "CPU Settings": "CPUの設定",
-    "GPU Settings": "GPU設定",
-    "Display Settings": "表示設定",
-    "Experimental": "実験的",
-    "GPU Scheduling Override Method": "GPU スケジューリング オーバーライド メソッド",
-    "can be dangerous and may cause": "危険であり、原因となる可能性があります",
-    "damage to your battery or charger!": "バッテリーまたは充電器が損傷します。",
-    "Charge Current Override": "充電電流オーバーライド",
-    "RAM Voltage Display Mode": "RAM電圧表示モード",
-    "Polling Interval": "ポーリング間隔",
-    "CPU Governor Minimum Frequency": "CPU ガバナの最小周波数",
-    "refresh rates may cause stress": "リフレッシュレートがストレスを引き起こす可能性がある",
-    "or damage to your display! ": "ディスプレイに損傷を与えてしまいます。",
-    "Proceed at your own risk!": "自己責任で進めてください！",
-    "Max Handheld Display": "最大ハンドヘルドディスプレイ",
-    "Display Clock": "時計の表示",
-    "Official Rating": "公式評価",
-    "TDP Threshold": "TDP しきい値",
-    "Power": "パワー",
-    "Thermal Throttle Limit": "サーマルスロットル制限",
-    "HP Mode": "HPモード",
-    "Default (Mariko)": "デフォルト（マリコ）",
-    "Default (Erista)": "デフォルト（エリスタ）",
-    "Rating": "評価",
-    "Safe Max (Mariko)": "セーフマックス（マリコ）",
-    "Safe Max (Erista)": "セーフマックス(エリスタ)",
-    "RAM VDD2 Voltage": "RAM VDD2 電圧",
-    "Voltage": "電圧",
-    "RAM VDDQ Voltage": "RAM VDDQ 電圧",
-    "RAM Frequency Editor": "RAM周波数エディター",
-    "JEDEC.": "JEDEC。",
-    "High speedo needed!": "ハイスピードが必要です！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (エクストリーム Speedo/PLL が必要)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (エクストリーム Speedo/PLL が必要)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (エクストリーム Speedo/PLL が必要)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (とんでもない Speedo/PLL が必要)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (とんでもない Speedo/PLL が必要)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (とんでもない Speedo/PLL が必要)",
-    "Ram Max Clock": "ラムマックスクロック",
-    "RAM Latency Editor": "RAM レイテンシ エディター",
-    "RAM Timing Reductions": "RAM タイミングの削減",
-    "Memory Timings": "メモリタイミング",
-    "Advanced": "上級者向け",
-    "t6 tRTW Fine Tune": "t6 tRTW 微調整",
-    "tRTW Fine Tune": "tRTW 微調整",
-    "t7 tWTR Fine Tune": "t7 tWTR ファインチューン",
-    "tWTR Fine Tune": "tWTR ファインチューン",
-    "Memory Latencies": "メモリレイテンシ",
-    "Read Latency": "読み取りレイテンシー",
-    "Write Latency": "書き込みレイテンシ",
-    "CPU Boost Clock": "CPUブーストクロック",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "CPUロック解除",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU最大電圧",
-    "CPU Max Clock": "CPU最大クロック",
-    "Extreme UV Table": "エクストリーム UV テーブル",
-    "CPU UV Table": "CPU UV テーブル",
-    "CPU Low UV": "CPU 低 UV",
-    "CPU High UV": "CPU 高紫外線",
-    "CPU Low VMIN": "CPU 低 VMIN",
-    "CPU High VMIN": "CPU の高い VMIN",
-    "No Undervolt": "不足電圧なし",
-    "SLT Table": "SLTテーブル",
-    "HiOPT Table": "HiOPT テーブル",
-    "GPU Undervolt Table": "GPUアンダーボルトテーブル",
-    "GPU Minimum Voltage": "GPUの最小電圧",
-    "Calculate GPU Vmin": "GPU Vmin を計算する",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU最大電圧",
-    "GPU Voltage Offset": "GPU電圧オフセット",
-    "Do not override": "上書きしないでください",
-    "Enabled (Default)": "有効 (デフォルト)",
-    "96.6% limit": "96.6%制限",
-    "99.7% limit": "99.7%制限",
-    "GPU Scheduling Override": "GPU スケジュールのオーバーライド",
-    "Official Service": "正式サービス",
-    "GPU DVFS Mode": "GPU DVFS モード",
-    "GPU DVFS Offset": "GPU DVFS オフセット",
-    "GPU Voltage Table": "GPU電圧テーブル",
-    "GPU Custom Table (mV)": "GPUカスタムテーブル(mV)",
-    "1075MHz without UV, 1152MHz on SLT": "UVなしで1075MHz、SLTで1152MHz",
-    "or 1228MHz on HiOPT can cause ": "HiOPT で 1228MHz を使用すると、次のような問題が発生する可能性があります。",
-    "permanent damage to your Switch!": "Switch に永久的なダメージを与えます!",
-    "921MHz without UV and 960MHz on": "921MHz（UVなし）、960MHz（UVあり）",
-    "SLT or HiOPT can cause ": "SLT または HiOPT が原因となる可能性があります"
-}

dist/config/horizon-oc/lang/jp.json

@@ -1,146 +0,0 @@
-{
-    "Information": "Information",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module:",
-    "sys-dock status:": "sys-dock status:",
-    "SaltyNX status:": "SaltyNX status:",
-    "RR Display status:": "RR Display status:",
-    "Wafer Position:": "Wafer Position:",
-    "Credits": "Credits",
-    "Developers": "Developers",
-    "Contributors": "Contributors",
-    "Testers": "Testers",
-    "Special Thanks": "Special Thanks",
-    "Unknown": "Unknown",
-    "Installed": "Installed",
-    "Not Installed": "Not Installed",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE",
-    "Default": "Default",
-    "Do Not Override": "Do Not Override",
-    "Disabled": "Disabled",
-    "Enabled": "Enabled",
-    " \\ue0e3 Reset": "\\ue0e3 Reset",
-    "Display": "Display",
-    "Application changed\\n\\n": "Application changed\\n\\n",
-    "The running application changed\\n\\n": "The running application changed\\n\\n",
-    "while editing was going on.": "while editing was going on.",
-    "App ID": "App ID",
-    "Profile": "Profile",
-    "Board": "Board",
-    "USB Charger": "USB Charger",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Could not connect to hoc-clk sysmodule.\\n\\n",
-    "Please make sure everything is\\n\\n": "Please make sure everything is\\n\\n",
-    "correctly installed and enabled.": "correctly installed and enabled.",
-    "Fatal error": "Fatal error",
-    "Temporary Overrides ": "Temporary Overrides",
-    "Sleep Mode": "Sleep Mode",
-    "Stock": "Stock",
-    "Dev OC": "Dev OC",
-    "Boost Mode": "Boost Mode",
-    "Safe Max": "Safe Max",
-    "Unsafe Max": "Unsafe Max",
-    "Absolute Max": "Absolute Max",
-    "Handheld": "Handheld",
-    "Handheld Safe Max": "Handheld Safe Max",
-    "Docked": "Docked",
-    "Enable": "Enable",
-    "Edit App Profile": "Edit App Profile",
-    "Edit Global Profile": "Edit Global Profile",
-    "Temporary Overrides": "Temporary Overrides",
-    "Settings": "Settings",
-    "About": "About",
-    "Compiling with minimal features": "Compiling with minimal features",
-    "General Settings": "General Settings",
-    "Governor Settings": "Governor Settings",
-    "Safety Settings": "Safety Settings",
-    "Save KIP Settings": "Save KIP Settings",
-    "RAM Settings": "RAM Settings",
-    "CPU Settings": "CPU Settings",
-    "GPU Settings": "GPU Settings",
-    "Display Settings": "Display Settings",
-    "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "GPU Scheduling Override Method",
-    "can be dangerous and may cause": "can be dangerous and may cause",
-    "damage to your battery or charger!": "damage to your battery or charger!",
-    "Charge Current Override": "Charge Current Override",
-    "RAM Voltage Display Mode": "RAM Voltage Display Mode",
-    "Polling Interval": "Polling Interval",
-    "CPU Governor Minimum Frequency": "CPU Governor Minimum Frequency",
-    "refresh rates may cause stress": "refresh rates may cause stress",
-    "or damage to your display! ": "or damage to your display!",
-    "Proceed at your own risk!": "Proceed at your own risk!",
-    "Max Handheld Display": "Max Handheld Display",
-    "Display Clock": "Display Clock",
-    "Official Rating": "Official Rating",
-    "TDP Threshold": "TDP Threshold",
-    "Power": "Power",
-    "Thermal Throttle Limit": "Thermal Throttle Limit",
-    "HP Mode": "HP Mode",
-    "Default (Mariko)": "Default (Mariko)",
-    "Default (Erista)": "Default (Erista)",
-    "Rating": "Rating",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
-    "RAM VDD2 Voltage": "RAM VDD2 Voltage",
-    "Voltage": "Voltage",
-    "RAM VDDQ Voltage": "RAM VDDQ Voltage",
-    "RAM Frequency Editor": "RAM Frequency Editor",
-    "JEDEC.": "JEDEC.",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Needs extreme Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Needs extreme Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Needs extreme Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Needs ridiculous Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Needs ridiculous Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Needs ridiculous Speedo/PLL)",
-    "Ram Max Clock": "Ram Max Clock",
-    "RAM Latency Editor": "RAM Latency Editor",
-    "RAM Timing Reductions": "RAM Timing Reductions",
-    "Memory Timings": "Memory Timings",
-    "tREFI": "tREFI",
-    "Advanced": "Advanced",
-    "t6 tRTW Fine Tune": "t6 tRTW Fine Tune",
-    "tRTW Fine Tune": "tRTW Fine Tune",
-    "t7 tWTR Fine Tune": "t7 tWTR Fine Tune",
-    "tWTR Fine Tune": "tWTR Fine Tune",
-    "Memory Latencies": "Memory Latencies",
-    "Read Latency": "Read Latency",
-    "Write Latency": "Write Latency",
-    "CPU Boost Clock": "CPU Boost Clock",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "CPU Unlock",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU Max Voltage",
-    "CPU Max Clock": "CPU Max Clock",
-    "Extreme UV Table": "Extreme UV Table",
-    "CPU UV Table": "CPU UV Table",
-    "CPU Low UV": "CPU Low UV",
-    "CPU High UV": "CPU High UV",
-    "CPU Low VMIN": "CPU Low VMIN",
-    "CPU High VMIN": "CPU High VMIN",
-    "No Undervolt": "No Undervolt",
-    "SLT Table": "SLT Table",
-    "HiOPT Table": "HiOPT Table",
-    "GPU Undervolt Table": "GPU Undervolt Table",
-    "GPU Minimum Voltage": "GPU Minimum Voltage",
-    "Calculate GPU Vmin": "Calculate GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU Maximum Voltage",
-    "GPU Voltage Offset": "GPU Voltage Offset",
-    "Do not override": "Do not override",
-    "Enabled (Default)": "Enabled (Default)",
-    "96.6% limit": "96.6% limit",
-    "99.7% limit": "99.7% limit",
-    "GPU Scheduling Override": "GPU Scheduling Override",
-    "Official Service": "Official Service",
-    "GPU DVFS Mode": "GPU DVFS Mode",
-    "GPU DVFS Offset": "GPU DVFS Offset",
-    "GPU Voltage Table": "GPU Voltage Table",
-    "GPU Custom Table (mV)": "GPU Custom Table (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz without UV, 1152MHz on SLT",
-    "or 1228MHz on HiOPT can cause ": "or 1228MHz on HiOPT can cause",
-    "permanent damage to your Switch!": "permanent damage to your Switch!",
-    "921MHz without UV and 960MHz on": "921MHz without UV and 960MHz on",
-    "SLT or HiOPT can cause ": "SLT or HiOPT can cause"
-}

dist/config/horizon-oc/lang/ko.json

@@ -1,141 +0,0 @@
-{
-    "Information": "정보",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "모듈:",
-    "sys-dock status:": "sys-dock 상태:",
-    "SaltyNX status:": "SaltyNX 상태:",
-    "RR Display status:": "RR 표시 상태:",
-    "Wafer Position:": "웨이퍼 위치:",
-    "Credits": "크레딧",
-    "Developers": "개발자",
-    "Contributors": "기여자",
-    "Testers": "테스터",
-    "Special Thanks": "특별한 분",
-    "Unknown": "알 수 없음",
-    "Installed": "설치됨",
-    "Not Installed": "설치되지 않음",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "맥주 제품 라이센스",
-    "Default": "기본값",
-    "Do Not Override": "재정의하지 마십시오",
-    "Disabled": "비활성화",
-    "Enabled": "활성화됨",
-    " \\ue0e3 Reset": "\\ue0e3 재설정",
-    "Display": "디스플레이",
-    "Application changed\\n\\n": "애플리케이션이 변경되었습니다.\\n\\n",
-    "The running application changed\\n\\n": "실행 중인 애플리케이션이 변경되었습니다.\\n\\n",
-    "while editing was going on.": "편집이 진행되는 동안.",
-    "Board": "보드",
-    "%u.%u%u mV": "%u.%u%umV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk 시스템 모듈에 연결할 수 없습니다.\\n\\n",
-    "Please make sure everything is\\n\\n": "모든 것이 올바른지 확인하십시오.\\n\\n",
-    "correctly installed and enabled.": "올바르게 설치되고 활성화되었습니다.",
-    "Fatal error": "치명적인 오류",
-    "Temporary Overrides ": "임시 재정의",
-    "Sleep Mode": "절전 모드",
-    "Stock": "주식",
-    "Dev OC": "개발 OC",
-    "Overwrite Boost Mode": "부스트 모드 덮어쓰기",
-    "Safe Max": "안전함 최대값",
-    "Unsafe Max": "불안정 최대값",
-    "Absolute Max": "절대 최대값",
-    "Handheld Safe Max": "휴대모드 안전함 최대값",
-    "Enable": "활성화",
-    "Edit App Profile": "앱 프로필 편집",
-    "Edit Global Profile": "글로벌 프로필 편집",
-    "Temporary Overrides": "임시 재정의",
-    "Settings": "설정",
-    "About": "소개",
-    "Compiling with minimal features": "최소한의 기능으로 컴파일하기",
-    "General Settings": "일반 설정",
-    "Governor Settings": "거버너 설정",
-    "Safety Settings": "안전 설정",
-    "Save KIP Settings": "KIP 설정 저장",
-    "RAM Settings": "RAM 설정",
-    "CPU Settings": "CPU 설정",
-    "GPU Settings": "GPU 설정",
-    "Display Settings": "디스플레이 설정",
-    "Experimental": "실험적",
-    "GPU Scheduling Override Method": "GPU 스케줄링 재정의 방법",
-    "can be dangerous and may cause": "위험할 수 있고 원인이 될 수 있습니다.",
-    "damage to your battery or charger!": "배터리나 충전기가 손상되었습니다!",
-    "Charge Current Override": "충전 전류 오버라이드",
-    "RAM Voltage Display Mode": "RAM 전압 표시 모드",
-    "Polling Interval": "폴링 간격",
-    "CPU Governor Minimum Frequency": "CPU 거버너 최소 주파수",
-    "refresh rates may cause stress": "디스플레이 주사율 빈도 변경은",
-    "or damage to your display! ": "기기에 손상이 발생될 수 있습니다!",
-    "Proceed at your own risk!": "책임하에 주의해서 사용하십시오!",
-    "Max Handheld Display": "최대 휴대용 디스플레이",
-    "Display Clock": "디스플레이 클럭",
-    "Official Rating": "공식 등급",
-    "TDP Threshold": "TDP 임계값",
-    "Power": "힘",
-    "Thermal Throttle Limit": "열 스로틀 한계",
-    "HP Mode": "HP 모드",
-    "Default (Mariko)": "기본값(마리코)",
-    "Default (Erista)": "기본값(에리스타)",
-    "Rating": "표준값",
-    "Safe Max (Mariko)": "안전함 최대치(마리코)",
-    "Safe Max (Erista)": "안전함 최대치(에리스타)",
-    "RAM VDD2 Voltage": "RAM VDD2 전압",
-    "Voltage": "전압",
-    "RAM VDDQ Voltage": "RAM VDDQ 전압",
-    "RAM Frequency Editor": "RAM 주파수 편집기",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "높은 스피도값이 필요합니다!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz(극단적인 Speedo/PLL 필요)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz(극단적인 Speedo/PLL 필요)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz(극단적인 Speedo/PLL 필요)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (말도 안 되는 Speedo/PLL 필요)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz(터무니없는 Speedo/PLL 필요)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz(터무니없는 Speedo/PLL 필요)",
-    "Ram Max Clock": "RAM 최대 클럭",
-    "RAM Latency Editor": "RAM 지연 시간 편집기",
-    "RAM Timing Reductions": "RAM 타이밍 편집기",
-    "Memory Timings": "메모리 타이밍",
-    "Advanced": "고급",
-    "t6 tRTW Fine Tune": "t6 tRTW 미세 조정",
-    "tRTW Fine Tune": "tRTW 미세 조정",
-    "t7 tWTR Fine Tune": "t7 tWTR 미세 조정",
-    "tWTR Fine Tune": "tWTR 미세 조정",
-    "Memory Latencies": "메모리 지연 시간",
-    "Read Latency": "읽기 지연 시간",
-    "Write Latency": "쓰기 지연 시간",
-    "CPU Boost Clock": "CPU 부스트 클럭",
-    "CPU UV": "CPU 언더볼트",
-    "CPU Unlock": "CPU 잠금 해제",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU 최대 전압",
-    "CPU Max Clock": "CPU 최대 클럭",
-    "Extreme UV Table": "익스트림 테이블",
-    "CPU UV Table": "CPU 언더볼트 테이블",
-    "CPU Low UV": "CPU 저주파 언더볼트",
-    "CPU High UV": "CPU 고주파 언더볼트",
-    "CPU Low VMIN": "CPU 저주파 최소 전압",
-    "CPU High VMIN": "CPU 고주파 최소 전압",
-    "No Undervolt": "언더볼트 없음",
-    "SLT Table": "SLT 테이블",
-    "HiOPT Table": "HiOPT 테이블",
-    "GPU Undervolt Table": "GPU 언더볼트 테이블",
-    "GPU Minimum Voltage": "GPU 최소 전압",
-    "Calculate GPU Vmin": "GPU Vmin 계산",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU 최대 전압",
-    "GPU Voltage Offset": "GPU 전압 오프셋",
-    "Do not override": "재정의하지 않음",
-    "Enabled (Default)": "활성화됨(기본값)",
-    "96.6% limit": "96.6% 한도",
-    "99.7% limit": "99.7% 한도",
-    "GPU Scheduling Override": "GPU 스케줄링 재정의",
-    "Official Service": "공식 서비스",
-    "GPU DVFS Mode": "GPU DVFS 모드",
-    "GPU DVFS Offset": "GPU DVFS 오프셋",
-    "GPU Voltage Table": "GPU 전압 테이블",
-    "GPU Custom Table (mV)": "GPU 사용자 정의 테이블(mV)",
-    "1075MHz without UV, 1152MHz on SLT": "UV 없이 1075MHz, SLT에서 1152MHz",
-    "or 1228MHz on HiOPT can cause ": "또는 HiOPT에서 1228MHz를 사용하면",
-    "permanent damage to your Switch!": "스위치가 영구적으로 손상될 수 있습니다!",
-    "921MHz without UV and 960MHz on": "UV가 없는 경우 921MHz, 켜진 경우에는 960MHz",
-    "SLT or HiOPT can cause ": "SLT 또는 HiOPT는 다음을 유발할 수 있습니다."
-}

dist/config/horizon-oc/lang/lang/de.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Informationen",
-    "Unknown": "Unbekannt",
-    "Installed": "Installiert",
-    "Not Installed": "Nicht installiert",
-    "Default": "Standard",
-    "Do Not Override": "Nicht überschreiben",
-    "Do not override": "Nicht überschreiben",
-    "Disabled": "Deaktiviert",
-    "Enabled": "Aktiviert",
-    "Enabled (Default)": "Aktiviert (Standard)",
-    "Enable": "Aktivieren",
-    "Fatal error": "Fataler Fehler",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Es konnte keine Verbindung zum hoc-clk-Systemmodul hergestellt werden.\\n\\n",
-    "Please make sure everything is\\n\\n": "Bitte stellen Sie sicher, dass alles in Ordnung ist\\n\\n",
-    "correctly installed and enabled.": "korrekt installiert und aktiviert.",
-
-    "Edit App Profile": "App-Profil bearbeiten",
-    "Edit Global Profile": "Globales Profil bearbeiten",
-    "Temporary Overrides": "Temporäre Überschreibungen",
-    "Temporary Overrides ": "Temporäre Überschreibungen",
-    "  Reset": " Zurücksetzen",
-    "Settings": "Einstellungen",
-    "About": "Über",
-    "Credits": "Credits",
-
-    "Application changed\\n\\n": "Anwendung geändert\\n\\n",
-    "The running application changed\\n\\n": "Die laufende Anwendung hat sich geändert\\n\\n",
-    "while editing was going on.": "während die Bearbeitung im Gange war.",
-
-    "Sleep Mode": "Schlafmodus",
-    "Stock": "Lager",
-    "Dev OC": "Entwickler OC",
-    "Boost Mode": "Boost-Modus",
-    "Safe Max": "Sicher max",
-    "Unsafe Max": "Unsicher max",
-    "Absolute Max": "Absolutes Maximum",
-    "Handheld Safe Max": "Handsafe max",
-
-    "General Settings": "Allgemeine Einstellungen",
-    "Governor Settings": "Regler-Einstellungen",
-    "Safety Settings": "Sicherheitseinstellungen",
-    "Save KIP Settings": "KIP-Einstellungen speichern",
-    "RAM Settings": "RAM-Einstellungen",
-    "CPU Settings": "CPU-Einstellungen",
-    "GPU Settings": "GPU-Einstellungen",
-    "Display Settings": "Anzeigeeinstellungen",
-    "Experimental Settings": "Experimentelle Einstellungen",
-    "Experimental": "Experimentell",
-
-    " Settings marked in blue": "Blau markierte Einstellungen",
-    "don't require a reboot to apply!": "erfordern keinen Neustart zum Aktivieren!",
-    "You can also press  to show": "Drücken Sie auch  zum Anzeigen",
-    "information about each setting.": "von Informationen zu jeder Einstellung.",
-
-    " Experimental Settings are incomplete ": "Experimentelle Einstellungen unvollständig",
-    "and may not work correctly or at all!": "und funktionieren möglicherweise gar nicht!",
-    "Here be dragons!": "Hier gibt es Drachen!",
-
-    "RAM Voltage Display Mode": "RAM-Spannungsanzeigemodus",
-    "RAM Display Unit": "RAM-Anzeigeeinheit",
-    "Polling Interval": "Abfrageintervall",
-
-    "GPU Scheduling Override Method": "GPU-Planungsüberschreibungsmethode",
-    "GPU Scheduling Override": "GPU-Planungsüberschreibung",
-    "GPU Boot Volt": "GPU Boot-Spannung",
-    "GPU Boot Voltage": "GPU Boot-Spannung",
-    "Memory Frequency Measurement Mode": "RAM-Frequenz-Messmodus",
-    " Overriding the charge current": "Überschreiben des Ladestroms",
-    "can be dangerous and may cause": "kann gefährlich sein und verursachen",
-    "damage to your battery or charger!": "Schäden an Ihrem Akku oder Ladegerät!",
-    "Charge Current Override": "Ladestrom-Überbrückung",
-    "Display Color Preset": "Farbprofil",
-    "Basic": "Standard",
-    "Saturated": "Gesättigt",
-    "Washed": "Verblasst",
-    "Natural": "Natürlich",
-    "Vivid": "Lebendig",
-
-    "CPU Governor Minimum Frequency": "Mindestfrequenz des CPU-Reglers",
-    " Usage of unsafe display": "Verwendung unsicherer Bildschirmfrequenzen",
-    "refresh rates may cause stress": "Bildwiederholraten können Stress verursachen",
-    "or damage to your display! ": "oder Schäden an Ihrem Display!",
-    "Proceed at your own risk!": "Das Vorgehen erfolgt auf eigene Gefahr!",
-    "Max Handheld Display": "Max Handheld-Display",
-    "Max Handheld Display Hz": "Max. Handheld-Hz",
-    "Display Clock": "Uhr anzeigen",
-    " Adjust the display voltage": "Display-Spannung anpassen",
-    "with caution to avoid damage": "mit Vorsicht, um Schäden zu vermeiden",
-    "to your display panel! ": "am Display-Panel!",
-    "Display Voltage": "Display-Spannung",
-
-    "Thermal Throttle Limit": "Thermische Drosselgrenze",
-    "Official Rating": "Offizielle Bewertung",
-    "TDP Threshold": "TDP-Schwellenwert",
-    "Power": "Macht",
-    "HP Mode": "HP-Modus",
-
-    "DVB Shift": "DVB-Versatz",
-    "SoC Max Volt": "SoC Max-Spannung",
-    "Step Mode": "Schritt-Modus",
-    "RAM VDD2 Voltage": "RAM VDD2 Spannung",
-    "RAM VDDQ Voltage": "RAM-VDDQ-Spannung",
-    "Voltage": "Spannung",
-    "RAM Frequency Editor": "RAM-Frequenzeditor",
-    "Ram Max Clock": "Ram Max Takt",
-    "RAM Latency Editor": "RAM-Latenz-Editor",
-    "RAM Timing Reductions": "Reduzierung des RAM-Timings",
-    "Memory Timings": "Speicherzeiten",
-    "Advanced": "Fortgeschritten",
-    "t6 tRTW Fine Tune": "t6 tRTW Feinabstimmung",
-    "tRTW Fine Tune": "tRTW-Feinabstimmung",
-    "t7 tWTR Fine Tune": "t7 tWTR Feinabstimmung",
-    "tWTR Fine Tune": "tWTR-Feinabstimmung",
-    "Memory Latencies": "Speicherlatenzen",
-    "Read Latency": "Leselatenz",
-    "Write Latency": "Schreiblatenz",
-    "High speedo needed!": "Hoher Speedo-Wert erforderlich!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (Benötigt extremen Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (Benötigt extremen Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (Benötigt extremen Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (Benötigt lächerlichen Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (Benötigt lächerlichen Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (Benötigt lächerlichen Speedo/PLL)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "CPU-Boost-Takt",
-    "CPU UV": "CPU-UV",
-    "CPU Unlock": "CPU-Entsperrung",
-    "CPU VMIN": "CPU-VMIN",
-    "CPU Max Voltage": "Maximale CPU-Spannung",
-    "CPU Max Clock": "Maximaler CPU-Takt",
-    "Extreme UV Table": "Extremer UV-Tisch",
-    "CPU UV Table": "CPU-UV-Tisch",
-    "CPU Low UV": "CPU niedrige UV",
-    "CPU High UV": "CPU hohe UV",
-    "CPU Low VMIN": "CPU niedrig VMIN",
-    "CPU High VMIN": "CPU hoch VMIN",
-
-    "No Undervolt": "Kein Undervolt",
-    "SLT Table": "SLT-Tabelle",
-    "HiOPT Table": "HiOPT-Tabelle",
-    "GPU Undervolt Table": "GPU-Unterspannungstabelle",
-    "GPU Minimum Voltage": "GPU-Mindestspannung",
-    "Calculate GPU Vmin": "GPU-Vmin berechnen",
-    "GPU VMIN": "GPU-VMIN",
-    "GPU Maximum Voltage": "Maximale GPU-Spannung",
-    "GPU Voltage Offset": "GPU-Spannungsoffset",
-    "GPU DVFS Mode": "GPU-DVFS-Modus",
-    "GPU DVFS Offset": "GPU-DVFS-Offset",
-    "GPU Voltage Table": "GPU-Spannungstabelle",
-    "GPU Custom Table (mV)": "Benutzerdefinierte GPU-Tabelle (mV)",
-    "Official Service": "Offizieller Dienst",
-    "96.6% limit": "96,6 %-Grenze",
-    "99.7% limit": "99,7 %-Grenze",
-    " Setting GPU Clocks past": "GPU-Takt überschreiten",
-    "1228MHz without a proper undervolt": "1228 MHz ohne korrekten Undervolt",
-    "can cause degradation or damage": "kann Degradierung oder Schäden verursachen",
-    "to your console!": "an Ihrer Konsole!",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz ohne UV, 1152 MHz auf SLT",
-    "or 1228MHz on HiOPT can cause ": "oder 1228 MHz auf HiOPT kann dazu führen",
-    "permanent damage to your Switch!": "dauerhafter Schaden an Ihrem Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz ohne UV und 960 MHz eingeschaltet",
-    "SLT or HiOPT can cause ": "SLT oder HiOPT können dazu führen",
-
-    "Default (Mariko)": "Standard (Mariko)",
-    "Default (Erista)": "Standard (Erista)",
-    "Rating": "Bewertung",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
-
-    "Voltages": "Spannungen",
-    "RAM Voltage:": "RAM-Spannung:",
-    "Display Voltage:": "Display-Spannung:",
-    "Temperatures": "Temperaturen",
-    "PLLX Temp:": "PLLX Temp:",
-    "AOTAG Temp:": "AOTAG Temp:",
-    "BQ24193 Temp:": "BQ24193 Temp:",
-    "Normal": "Normal",
-    "Warm": "Warm",
-    "Hot": "Heiß",
-    "Overheat": "Überhitzung",
-    "Not Patched": "Nicht gepatcht",
-    "Invalid": "Ungültig",
-    "RAM Bandwidth": "RAM-Bandbreite",
-    "RAM BW (Peak):": "RAM-BW (Max.):",
-    "RAM BW (All):": "RAM-BW (Ges.):",
-    "RAM BW (CPU):": "RAM-BW (CPU):",
-    "RAM BW (GPU):": "RAM-BW (GPU):",
-    "Hardware Info": "Hardware-Info",
-    "Console Type:": "Konsolentyp:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "DRAM-Modul: ",
-    "Software Info": "Software-Info",
-    "KIP version:": "KIP-Version:",
-    "sys-dock status:": "Sys-Dock-Status:",
-    "SaltyNX status:": "SaltyNX-Status:",
-    "RR Display status:": "RR Anzeigestatus:",
-    "Wafer Position:": "Waferposition:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Modul:",
-    "Board": "Vorstand",
-    "Display": "Anzeige",
-
-    "Developers": "Entwickler",
-    "Contributors": "Mitwirkende",
-    "Testers": "Tester",
-    "Translators": "Übersetzer",
-    "Special Thanks": "Besonderer Dank",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "Kompilieren mit minimalen Funktionen",
-    "THE BEER-WARE LICENSE": "DIE BIERWAREN-LIZENZ"
-}

dist/config/horizon-oc/lang/lang/en.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Information",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module: ",
-    "sys-dock status:": "sys-dock status:",
-    "SaltyNX status:": "SaltyNX status:",
-    "RR Display status:": "RR Display status:",
-    "Wafer Position:": "Wafer Position:",
-    "Credits": "Credits",
-    "Developers": "Developers",
-    "Contributors": "Contributors",
-    "Testers": "Testers",
-    "Special Thanks": "Special Thanks",
-    "Unknown": "Unknown",
-    "Installed": "Installed",
-    "Not Installed": "Not Installed",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE",
-    "Default": "Default",
-    "Do Not Override": "Do Not Override",
-    "Disabled": "Disabled",
-    "Enabled": "Enabled",
-    " \\ue0e3 Reset": " \\ue0e3 Reset",
-    "Display": "Display",
-    "Application changed\\n\\n": "Application changed\\n\\n",
-    "The running application changed\\n\\n": "The running application changed\\n\\n",
-    "while editing was going on.": "while editing was going on.",
-    "Board": "Board",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Could not connect to hoc-clk sysmodule.\\n\\n",
-    "Please make sure everything is\\n\\n": "Please make sure everything is\\n\\n",
-    "correctly installed and enabled.": "correctly installed and enabled.",
-    "Fatal error": "Fatal error",
-    "Temporary Overrides ": "Temporary Overrides ",
-    "Sleep Mode": "Sleep Mode",
-    "Stock": "Stock",
-    "Dev OC": "Dev OC",
-    "Boost Mode": "Boost Mode",
-    "Safe Max": "Safe Max",
-    "Unsafe Max": "Unsafe Max",
-    "Absolute Max": "Absolute Max",
-    "Handheld Safe Max": "Handheld Safe Max",
-    "Enable": "Enable",
-    "Edit App Profile": "Edit App Profile",
-    "Edit Global Profile": "Edit Global Profile",
-    "Temporary Overrides": "Temporary Overrides",
-    "Settings": "Settings",
-    "About": "About",
-    "Compiling with minimal features": "Compiling with minimal features",
-    "General Settings": "General Settings",
-    "Governor Settings": "Governor Settings",
-    "Safety Settings": "Safety Settings",
-    "Save KIP Settings": "Save KIP Settings",
-    "RAM Settings": "RAM Settings",
-    "CPU Settings": "CPU Settings",
-    "GPU Settings": "GPU Settings",
-    "Display Settings": "Display Settings",
-    "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "GPU Scheduling Override Method",
-    "can be dangerous and may cause": "can be dangerous and may cause",
-    "damage to your battery or charger!": "damage to your battery or charger!",
-    "Charge Current Override": "Charge Current Override",
-    "RAM Voltage Display Mode": "RAM Voltage Display Mode",
-    "Polling Interval": "Polling Interval",
-    "CPU Governor Minimum Frequency": "CPU Governor Minimum Frequency",
-    "refresh rates may cause stress": "refresh rates may cause stress",
-    "or damage to your display! ": "or damage to your display! ",
-    "Proceed at your own risk!": "Proceed at your own risk!",
-    "Max Handheld Display": "Max Handheld Display",
-    "Display Clock": "Display Clock",
-    "Official Rating": "Official Rating",
-    "TDP Threshold": "TDP Threshold",
-    "Power": "Power",
-    "Thermal Throttle Limit": "Thermal Throttle Limit",
-    "HP Mode": "HP Mode",
-    "Default (Mariko)": "Default (Mariko)",
-    "Default (Erista)": "Default (Erista)",
-    "Rating": "Rating",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
-    "RAM VDD2 Voltage": "RAM VDD2 Voltage",
-    "Voltage": "Voltage",
-    "RAM VDDQ Voltage": "RAM VDDQ Voltage",
-    "RAM Frequency Editor": "RAM Frequency Editor",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "High speedo needed!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Needs extreme Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Needs extreme Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Needs extreme Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Needs ridiculous Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Needs ridiculous Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Needs ridiculous Speedo/PLL)",
-    "Ram Max Clock": "Ram Max Clock",
-    "RAM Latency Editor": "RAM Latency Editor",
-    "RAM Timing Reductions": "RAM Timing Reductions",
-    "Memory Timings": "Memory Timings",
-    "Advanced": "Advanced",
-    "t6 tRTW Fine Tune": "t6 tRTW Fine Tune",
-    "tRTW Fine Tune": "tRTW Fine Tune",
-    "t7 tWTR Fine Tune": "t7 tWTR Fine Tune",
-    "tWTR Fine Tune": "tWTR Fine Tune",
-    "Memory Latencies": "Memory Latencies",
-    "Read Latency": "Read Latency",
-    "Write Latency": "Write Latency",
-    "CPU Boost Clock": "CPU Boost Clock",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "CPU Unlock",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU Max Voltage",
-    "CPU Max Clock": "CPU Max Clock",
-    "Extreme UV Table": "Extreme UV Table",
-    "CPU UV Table": "CPU UV Table",
-    "CPU Low UV": "CPU Low UV",
-    "CPU High UV": "CPU High UV",
-    "CPU Low VMIN": "CPU Low VMIN",
-    "CPU High VMIN": "CPU High VMIN",
-    "No Undervolt": "No Undervolt",
-    "SLT Table": "SLT Table",
-    "HiOPT Table": "HiOPT Table",
-    "GPU Undervolt Table": "GPU Undervolt Table",
-    "GPU Minimum Voltage": "GPU Minimum Voltage",
-    "Calculate GPU Vmin": "Calculate GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU Maximum Voltage",
-    "GPU Voltage Offset": "GPU Voltage Offset",
-    "Do not override": "Do not override",
-    "Enabled (Default)": "Enabled (Default)",
-    "96.6% limit": "96.6% limit",
-    "99.7% limit": "99.7% limit",
-    "GPU Scheduling Override": "GPU Scheduling Override",
-    "Official Service": "Official Service",
-    "GPU DVFS Mode": "GPU DVFS Mode",
-    "GPU DVFS Offset": "GPU DVFS Offset",
-    "GPU Voltage Table": "GPU Voltage Table",
-    "GPU Custom Table (mV)": "GPU Custom Table (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz without UV, 1152MHz on SLT",
-    "or 1228MHz on HiOPT can cause ": "or 1228MHz on HiOPT can cause ",
-    "permanent damage to your Switch!": "permanent damage to your Switch!",
-    "921MHz without UV and 960MHz on": "921MHz without UV and 960MHz on",
-    "SLT or HiOPT can cause ": "SLT or HiOPT can cause "
-}

dist/config/horizon-oc/lang/lang/es.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Información",
-    "Unknown": "Desconocido",
-    "Installed": "Instalado",
-    "Not Installed": "No instalado",
-    "Default": "Predeterminado",
-    "Do Not Override": "No sobrescribir",
-    "Do not override": "No sobrescribir",
-    "Disabled": "Desactivado",
-    "Enabled": "Activado",
-    "Enabled (Default)": "Activado (predeterminado)",
-    "Enable": "Activar",
-    "Fatal error": "Error fatal",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Asegúrate de que todo esté\\n\\n",
-    "correctly installed and enabled.": "correctamente instalado y activado.",
-
-    "Edit App Profile": "Editar perfil de aplicación",
-    "Edit Global Profile": "Editar perfil global",
-    "Temporary Overrides": "Ajustes temporales",
-    "Temporary Overrides ": "Ajustes temporales",
-    "  Reset": " Restablecer",
-    "Settings": "Configuración",
-    "About": "Acerca de",
-    "Credits": "Créditos",
-
-    "Application changed\\n\\n": "Aplicación cambiada\\n\\n",
-    "The running application changed\\n\\n": "La aplicación en ejecución ha cambiado\\n\\n",
-    "while editing was going on.": "mientras se estaba editando.",
-
-    "Sleep Mode": "Modo reposo",
-    "Stock": "Valores de fábrica",
-    "Dev OC": "OC de desarrollo",
-    "Boost Mode": "Modo boost",
-    "Safe Max": "Máximo seguro",
-    "Unsafe Max": "Máximo no seguro",
-    "Absolute Max": "Máximo absoluto",
-    "Handheld Safe Max": "Máximo seguro en portátil",
-
-    "General Settings": "Configuración general",
-    "Governor Settings": "Configuración del governor",
-    "Safety Settings": "Configuración de seguridad",
-    "Save KIP Settings": "Guardar configuración KIP",
-    "RAM Settings": "Configuración de RAM",
-    "CPU Settings": "Configuración de CPU",
-    "GPU Settings": "Configuración de GPU",
-    "Display Settings": "Configuración de pantalla",
-    "Experimental Settings": "Configuración experimental",
-    "Experimental": "Experimental",
-
-    " Settings marked in blue": "La configuración en azul",
-    "don't require a reboot to apply!": "no requiere reinicio para aplicarse.",
-    "You can also press  to show": "Pulsa  para mostrar",
-    "information about each setting.": "información sobre cada ajuste.",
-
-    " Experimental Settings are incomplete ": "La configuración experimental está incompleta",
-    "and may not work correctly or at all!": "y puede que no funcione correctamente.",
-    "Here be dragons!": "¡Aquí hay dragones!",
-
-    "RAM Voltage Display Mode": "Modo de visualización de voltaje de RAM",
-    "RAM Display Unit": "Unidad de visualización RAM",
-    "Polling Interval": "Intervalo de sondeo",
-
-    "GPU Scheduling Override Method": "Método de sobrescritura del scheduling de GPU",
-    "GPU Scheduling Override": "Sobrescritura de scheduling de GPU",
-    "GPU Boot Volt": "Voltaje de arranque GPU",
-    "GPU Boot Voltage": "Voltaje de arranque GPU",
-    "Memory Frequency Measurement Mode": "Modo de medición de frecuencia de memoria",
-    " Overriding the charge current": "Sobrescribir la corriente de carga",
-    "can be dangerous and may cause": "puede ser peligroso y causar",
-    "damage to your battery or charger!": "daños a la batería o al cargador.",
-    "Charge Current Override": "Sobrescritura de corriente de carga",
-    "Display Color Preset": "Preajuste de color",
-    "Basic": "Básico",
-    "Saturated": "Saturado",
-    "Washed": "Lavado",
-    "Natural": "Natural",
-    "Vivid": "Vívido",
-
-    "CPU Governor Minimum Frequency": "Frecuencia mínima del governor de CPU",
-    " Usage of unsafe display": "El uso de frecuencias de pantalla",
-    "refresh rates may cause stress": "las tasas de refresco pueden causar estrés",
-    "or damage to your display! ": "o dañar la pantalla.",
-    "Proceed at your own risk!": "¡Úsalo bajo tu propio riesgo!",
-    "Max Handheld Display": "Frecuencia máxima de pantalla en portátil",
-    "Max Handheld Display Hz": "Hz máximo en modo portátil",
-    "Display Clock": "Frecuencia de pantalla",
-    " Adjust the display voltage": "Ajusta el voltaje de pantalla",
-    "with caution to avoid damage": "con cuidado para evitar daños",
-    "to your display panel! ": "al panel de pantalla.",
-    "Display Voltage": "Voltaje de pantalla",
-
-    "Thermal Throttle Limit": "Límite de thermal throttling",
-    "Official Rating": "Valor oficial",
-    "TDP Threshold": "Umbral de TDP",
-    "Power": "Potencia",
-    "HP Mode": "Modo alto rendimiento",
-
-    "DVB Shift": "Desplazamiento DVB",
-    "SoC Max Volt": "Voltaje máximo del SoC",
-    "Step Mode": "Modo de paso",
-    "RAM VDD2 Voltage": "Voltaje VDD2 de RAM",
-    "RAM VDDQ Voltage": "Voltaje VDDQ de RAM",
-    "Voltage": "Voltaje",
-    "RAM Frequency Editor": "Editor de frecuencia de RAM",
-    "Ram Max Clock": "Frecuencia máxima de RAM",
-    "RAM Latency Editor": "Editor de latencias de RAM",
-    "RAM Timing Reductions": "Reducción de timings de RAM",
-    "Memory Timings": "Timings de memoria",
-    "Advanced": "Avanzado",
-    "t6 tRTW Fine Tune": "Ajuste fino t6 tRTW",
-    "tRTW Fine Tune": "Ajuste fino tRTW",
-    "t7 tWTR Fine Tune": "Ajuste fino t7 tWTR",
-    "tWTR Fine Tune": "Ajuste fino tWTR",
-    "Memory Latencies": "Latencias de memoria",
-    "Read Latency": "Latencia de lectura",
-    "Write Latency": "Latencia de escritura",
-    "High speedo needed!": "¡Se necesita alto speedo!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (requiere Speedo/PLL extremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (requiere Speedo/PLL extremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (requiere Speedo/PLL extremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (requiere Speedo/PLL muy alto)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (requiere Speedo/PLL muy alto)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (requiere Speedo/PLL muy alto)",
-    "JEDEC.": "JEDEC",
-
-    "CPU Boost Clock": "Frecuencia boost de CPU",
-    "CPU UV": "Undervolt de CPU",
-    "CPU Unlock": "Desbloqueo de CPU",
-    "CPU VMIN": "VMIN de CPU",
-    "CPU Max Voltage": "Voltaje máximo de CPU",
-    "CPU Max Clock": "Frecuencia máxima de CPU",
-    "Extreme UV Table": "Tabla de undervolt extrema",
-    "CPU UV Table": "Tabla de undervolt de CPU",
-    "CPU Low UV": "Undervolt bajo de CPU",
-    "CPU High UV": "Undervolt alto de CPU",
-    "CPU Low VMIN": "VMIN bajo de CPU",
-    "CPU High VMIN": "VMIN alto de CPU",
-
-    "No Undervolt": "Sin undervolt",
-    "SLT Table": "Tabla SLT",
-    "HiOPT Table": "Tabla HiOPT",
-    "GPU Undervolt Table": "Tabla de undervolt de GPU",
-    "GPU Minimum Voltage": "Voltaje mínimo de GPU",
-    "Calculate GPU Vmin": "Calcular Vmin de GPU",
-    "GPU VMIN": "VMIN de GPU",
-    "GPU Maximum Voltage": "Voltaje máximo de GPU",
-    "GPU Voltage Offset": "Offset de voltaje de GPU",
-    "GPU DVFS Mode": "Modo DVFS de GPU",
-    "GPU DVFS Offset": "Offset DVFS de GPU",
-    "GPU Voltage Table": "Tabla de voltaje de GPU",
-    "GPU Custom Table (mV)": "Tabla personalizada de GPU (mV)",
-    "Official Service": "Servicio oficial",
-    "96.6% limit": "Límite 96,6%",
-    "99.7% limit": "Límite 99,7%",
-    " Setting GPU Clocks past": "Ajustar frecuencias de GPU más allá",
-    "1228MHz without a proper undervolt": "1228MHz sin undervolt adecuado",
-    "can cause degradation or damage": "puede causar degradación o daños",
-    "to your console!": "a tu consola.",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz sin undervolt, 1152MHz en SLT",
-    "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar ",
-    "permanent damage to your Switch!": "¡daño permanente a tu Switch!",
-    "921MHz without UV and 960MHz on": "921MHz sin undervolt y 960MHz en",
-    "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar ",
-
-    "Default (Mariko)": "Predeterminado (Mariko)",
-    "Default (Erista)": "Predeterminado (Erista)",
-    "Rating": "Valor",
-    "Safe Max (Mariko)": "Máximo seguro (Mariko)",
-    "Safe Max (Erista)": "Máximo seguro (Erista)",
-
-    "Voltages": "Voltajes",
-    "RAM Voltage:": "Voltaje RAM:",
-    "Display Voltage:": "Voltaje de pantalla:",
-    "Temperatures": "Temperaturas",
-    "PLLX Temp:": "PLLX Temp:",
-    "AOTAG Temp:": "AOTAG Temp:",
-    "BQ24193 Temp:": "BQ24193 Temp:",
-    "Normal": "Normal",
-    "Warm": "Cálido",
-    "Hot": "Caliente",
-    "Overheat": "Sobrecalentamiento",
-    "Not Patched": "Sin parche",
-    "Invalid": "Inválido",
-    "RAM Bandwidth": "Ancho de banda RAM",
-    "RAM BW (Peak):": "BW RAM (Pico):",
-    "RAM BW (All):": "BW RAM (Todo):",
-    "RAM BW (CPU):": "BW RAM (CPU):",
-    "RAM BW (GPU):": "BW RAM (GPU):",
-    "Hardware Info": "Info de hardware",
-    "Console Type:": "Tipo de consola:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "Módulo DRAM: ",
-    "Software Info": "Info de software",
-    "KIP version:": "Versión KIP:",
-    "sys-dock status:": "Estado de sys-dock:",
-    "SaltyNX status:": "Estado de SaltyNX:",
-    "RR Display status:": "Estado de pantalla RR:",
-    "Wafer Position:": "Posición del wafer:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Módulo:",
-    "Board": "Placa",
-    "Display": "Pantalla",
-
-    "Developers": "Desarrolladores",
-    "Contributors": "Colaboradores",
-    "Testers": "Testers",
-    "Translators": "Traductores",
-    "Special Thanks": "Agradecimientos especiales",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "Compilado con funciones mínimas",
-    "THE BEER-WARE LICENSE": "LICENCIA BEER-WARE"
-}

dist/config/horizon-oc/lang/lang/fr.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Informations",
-    "Unknown": "Inconnu",
-    "Installed": "Installé",
-    "Not Installed": "Non installé",
-    "Default": "Par défaut",
-    "Do Not Override": "Ne pas remplacer",
-    "Do not override": "Ne pas remplacer",
-    "Disabled": "Désactivé",
-    "Enabled": "Activé",
-    "Enabled (Default)": "Activé (par défaut)",
-    "Enable": "Activer",
-    "Fatal error": "Erreur fatale",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Veuillez vous assurer que tout est\\n\\n",
-    "correctly installed and enabled.": "correctement installé et activé.",
-
-    "Edit App Profile": "Modifier le profil de l'app",
-    "Edit Global Profile": "Modifier le profil global",
-    "Temporary Overrides": "Forçages temporaires",
-    "Temporary Overrides ": "Forçages temporaires ",
-    "  Reset": " Réinitialiser",
-    "Settings": "Paramètres",
-    "About": "À propos",
-    "Credits": "Crédits",
-
-    "Application changed\\n\\n": "Application modifiée\\n\\n",
-    "The running application changed\\n\\n": "L'application en cours d'exécution a changé\\n\\n",
-    "while editing was going on.": "pendant la modification.",
-
-    "Sleep Mode": "Mode veille",
-    "Stock": "D'origine",
-    "Dev OC": "OC Développeur",
-    "Boost Mode": "Mode Boost",
-    "Safe Max": "Max sûr",
-    "Unsafe Max": "Max non sûr",
-    "Absolute Max": "Max absolu",
-    "Handheld Safe Max": "Max sûr (mode portable)",
-
-    "General Settings": "Paramètres généraux",
-    "Governor Settings": "Paramètres du gouverneur",
-    "Safety Settings": "Paramètres de sécurité",
-    "Save KIP Settings": "Enregistrer les paramètres KIP",
-    "RAM Settings": "Paramètres RAM",
-    "CPU Settings": "Paramètres CPU",
-    "GPU Settings": "Paramètres GPU",
-    "Display Settings": "Paramètres d'affichage",
-    "Experimental Settings": "Paramètres expérimentaux",
-    "Experimental": "Expérimental",
-
-    " Settings marked in blue": "Les paramètres en bleu",
-    "don't require a reboot to apply!": "ne nécessitent pas de redémarrage !",
-    "You can also press  to show": "Appuyez aussi sur  pour afficher",
-    "information about each setting.": "les informations sur chaque paramètre.",
-
-    " Experimental Settings are incomplete ": "Les paramètres expérimentaux sont incomplets",
-    "and may not work correctly or at all!": "et peuvent ne pas fonctionner du tout !",
-    "Here be dragons!": "Ici, il y a des dragons !",
-
-    "RAM Voltage Display Mode": "Mode d'affichage de la tension RAM",
-    "RAM Display Unit": "Unité d'affichage RAM",
-    "Polling Interval": "Intervalle d'interrogation",
-
-    "GPU Scheduling Override Method": "Méthode de Forçage de l'ordonnancement GPU",
-    "GPU Scheduling Override": "Forçage de l'ordonnancement GPU",
-    "GPU Boot Volt": "Tension d'amorçage GPU",
-    "GPU Boot Voltage": "Tension d'amorçage GPU",
-    "Memory Frequency Measurement Mode": "Mode de mesure de fréquence mémoire",
-    " Overriding the charge current": "Le forçage du courant de charge",
-    "can be dangerous and may cause": "peut être dangereux et causer des",
-    "damage to your battery or charger!": "dommages à votre batterie ou chargeur !",
-    "Charge Current Override": "Forçage du courant de charge",
-    "Display Color Preset": "Préréglage de couleur",
-    "Basic": "Basique",
-    "Saturated": "Saturé",
-    "Washed": "Délavé",
-    "Natural": "Naturel",
-    "Vivid": "Vif",
-
-    "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur CPU",
-    " Usage of unsafe display": "L'utilisation de taux de rafraîchissement",
-    "refresh rates may cause stress": "les taux de rafraîchissement peuvent stresser",
-    "or damage to your display! ": "ou endommager votre écran !",
-    "Proceed at your own risk!": "À utiliser à vos propres risques !",
-    "Max Handheld Display": "Affichage portable max",
-    "Max Handheld Display Hz": "Hz max en mode portable",
-    "Display Clock": "Fréquence d'affichage",
-    " Adjust the display voltage": "Réglez la tension d'affichage",
-    "with caution to avoid damage": "avec précaution pour éviter des dommages",
-    "to your display panel! ": "à votre dalle d'affichage !",
-    "Display Voltage": "Tension d'affichage",
-
-    "Thermal Throttle Limit": "Limite d'étranglement thermique",
-    "Official Rating": "Classement officiel",
-    "TDP Threshold": "Seuil TDP",
-    "Power": "Alimentation",
-    "HP Mode": "Mode HP",
-
-    "DVB Shift": "Décalage DVB",
-    "SoC Max Volt": "Tension max SoC",
-    "Step Mode": "Mode pas à pas",
-    "RAM VDD2 Voltage": "Tension RAM VDD2",
-    "RAM VDDQ Voltage": "Tension RAM VDDQ",
-    "Voltage": "Tension",
-    "RAM Frequency Editor": "Éditeur de fréquence RAM",
-    "Ram Max Clock": "Fréquence RAM max",
-    "RAM Latency Editor": "Éditeur de latence RAM",
-    "RAM Timing Reductions": "Réductions des timings RAM",
-    "Memory Timings": "Timings mémoire",
-    "Advanced": "Avancé",
-    "t6 tRTW Fine Tune": "Ajustement précis t6 tRTW",
-    "tRTW Fine Tune": "Ajustement précis tRTW",
-    "t7 tWTR Fine Tune": "Ajustement précis t7 tWTR",
-    "tWTR Fine Tune": "Ajustement précis tWTR",
-    "Memory Latencies": "Latences mémoire",
-    "Read Latency": "Latence de lecture",
-    "Write Latency": "Latence d'écriture",
-    "High speedo needed!": "Speedo élevé requis !",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite Speedo/PLL extrême)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite Speedo/PLL extrême)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite Speedo/PLL extrême)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite Speedo/PLL ridicule)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite Speedo/PLL ridicule)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite Speedo/PLL ridicule)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "Fréquence Boost CPU",
-    "CPU UV": "UV CPU",
-    "CPU Unlock": "Déverrouillage CPU",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Tension CPU max",
-    "CPU Max Clock": "Fréquence CPU max",
-    "Extreme UV Table": "Table d'UV extrême",
-    "CPU UV Table": "Table d'UV CPU",
-    "CPU Low UV": "UV CPU faible",
-    "CPU High UV": "UV CPU élevé",
-    "CPU Low VMIN": "VMIN CPU faible",
-    "CPU High VMIN": "VMIN CPU élevé",
-
-    "No Undervolt": "Aucun Undervolt",
-    "SLT Table": "Table SLT",
-    "HiOPT Table": "Table HiOPT",
-    "GPU Undervolt Table": "Table d'undervolt GPU",
-    "GPU Minimum Voltage": "Tension GPU minimale",
-    "Calculate GPU Vmin": "Calculer Vmin GPU",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Tension GPU maximale",
-    "GPU Voltage Offset": "Offset de tension GPU",
-    "GPU DVFS Mode": "Mode GPU DVFS",
-    "GPU DVFS Offset": "Offset GPU DVFS",
-    "GPU Voltage Table": "Table de tension GPU",
-    "GPU Custom Table (mV)": "Table de GPU personnalisée (mV)",
-    "Official Service": "Service officiel",
-    "96.6% limit": "Limite de 96,6 %",
-    "99.7% limit": "Limite de 99,7 %",
-    " Setting GPU Clocks past": "Régler les fréquences GPU au-delà",
-    "1228MHz without a proper undervolt": "1228 MHz sans undervolt approprié",
-    "can cause degradation or damage": "peut causer une dégradation ou des dommages",
-    "to your console!": "à votre console !",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz sans UV, 1152 MHz sur SLT",
-    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut causer des",
-    "permanent damage to your Switch!": "dommages permanents à votre Switch !",
-    "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz sur",
-    "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent causer des",
-
-    "Default (Mariko)": "Par défaut (Mariko)",
-    "Default (Erista)": "Par défaut (Erista)",
-    "Rating": "Évaluation",
-    "Safe Max (Mariko)": "Max sûr (Mariko)",
-    "Safe Max (Erista)": "Max sûr (Erista)",
-
-    "Voltages": "Tensions",
-    "RAM Voltage:": "Tension RAM :",
-    "Display Voltage:": "Tension d'affichage :",
-    "Temperatures": "Températures",
-    "PLLX Temp:": "PLLX Temp :",
-    "AOTAG Temp:": "AOTAG Temp :",
-    "BQ24193 Temp:": "BQ24193 Temp :",
-    "Normal": "Normal",
-    "Warm": "Chaud",
-    "Hot": "Très chaud",
-    "Overheat": "Surchauffe",
-    "Not Patched": "Non patché",
-    "Invalid": "Invalide",
-    "RAM Bandwidth": "Bande passante RAM",
-    "RAM BW (Peak):": "BW RAM (Pic) :",
-    "RAM BW (All):": "BW RAM (Tout) :",
-    "RAM BW (CPU):": "BW RAM (CPU) :",
-    "RAM BW (GPU):": "BW RAM (GPU) :",
-    "Hardware Info": "Infos matériel",
-    "Console Type:": "Type de console :",
-    "Speedo:": "Speedo :",
-    "DRAM Module: ": "Module DRAM : ",
-    "Software Info": "Infos logiciel",
-    "KIP version:": "Version KIP :",
-    "sys-dock status:": "Statut de sys-dock :",
-    "SaltyNX status:": "Statut de SaltyNX :",
-    "RR Display status:": "Statut de l'affichage RR :",
-    "Wafer Position:": "Position du wafer :",
-    "IDDQ:": "IDDQ :",
-    "Module: ": "Module :",
-    "Board": "Carte",
-    "Display": "Écran",
-
-    "Developers": "Développeurs",
-    "Contributors": "Contributeurs",
-    "Testers": "Testeurs",
-    "Translators": "Traducteurs",
-    "Special Thanks": "Remerciements spéciaux",
-
-    "X: %u Y: %u": "X : %u Y : %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "Compilation avec fonctionnalités minimales",
-    "THE BEER-WARE LICENSE": "LA LICENCE BEER-WARE"
-}

dist/config/horizon-oc/lang/lang/it.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Informazioni",
-    "Unknown": "Sconosciuto",
-    "Installed": "Installato",
-    "Not Installed": "Non installato",
-    "Default": "Predefinito",
-    "Do Not Override": "Non Sovrascrivere",
-    "Do not override": "Non sovrascrivere",
-    "Disabled": "Disabilitato",
-    "Enabled": "Abilitato",
-    "Enabled (Default)": "Abilitato (impostazione predefinita)",
-    "Enable": "Abilita",
-    "Fatal error": "Errore fatale",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n",
-    "correctly installed and enabled.": "correttamente installato e abilitato.",
-
-    "Edit App Profile": "Modifica Profilo Dell'App",
-    "Edit Global Profile": "Modifica Profilo Globale",
-    "Temporary Overrides": "Sostituzioni Temporanee",
-    "Temporary Overrides ": "Sostituzioni Temporanee",
-    "  Reset": " Ripristina",
-    "Settings": "Impostazioni",
-    "About": "A Riguardo Di",
-    "Credits": "Crediti",
-
-    "Application changed\\n\\n": "Applicazione modificata\\n\\n",
-    "The running application changed\\n\\n": "L'applicazione in esecuzione è cambiata\\n\\n",
-    "while editing was going on.": "mentre era in corso la modifica.",
-
-    "Sleep Mode": "Modalità di Sospensione",
-    "Stock": "Originale",
-    "Dev OC": "OC dev",
-    "Boost Mode": "Modalità Boost",
-    "Safe Max": "Massimo Sicuro",
-    "Unsafe Max": "Massimo Non Sicuro",
-    "Absolute Max": "Massimo Assoluto",
-    "Handheld Safe Max": "Massimo Sicuro Modalità Portatile",
-
-    "General Settings": "Impostazioni Generali",
-    "Governor Settings": "Impostazioni Del Governor",
-    "Safety Settings": "Impostazioni Di Sicurezza",
-    "Save KIP Settings": "Salva le impostazioni del KIP",
-    "RAM Settings": "Impostazioni della RAM",
-    "CPU Settings": "Impostazioni della CPU",
-    "GPU Settings": "Impostazioni della GPU",
-    "Display Settings": "Impostazioni dello Schermo",
-    "Experimental Settings": "Impostazioni sperimentali",
-    "Experimental": "Sperimentale",
-
-    " Settings marked in blue": "Le impostazioni in blu",
-    "don't require a reboot to apply!": "non richiedono un riavvio per applicarsi!",
-    "You can also press  to show": "Premi anche  per mostrare",
-    "information about each setting.": "informazioni su ogni impostazione.",
-
-    " Experimental Settings are incomplete ": "Le impostazioni sperimentali sono incomplete",
-    "and may not work correctly or at all!": "e potrebbero non funzionare correttamente!",
-    "Here be dragons!": "Qui ci sono draghi!",
-
-    "RAM Voltage Display Mode": "Modalità di Visualizzazione della Tensione RAM",
-    "RAM Display Unit": "Unità di visualizzazione RAM",
-    "Polling Interval": "Intervallo di polling",
-
-    "GPU Scheduling Override Method": "Metodo di override dello scheduling GPU",
-    "GPU Scheduling Override": "Override dello Scheduling GPU",
-    "GPU Boot Volt": "Tensione di avvio GPU",
-    "GPU Boot Voltage": "Tensione di avvio GPU",
-    "Memory Frequency Measurement Mode": "Modalità di misurazione della frequenza della memoria",
-    " Overriding the charge current": "L'override della corrente di carica",
-    "can be dangerous and may cause": "può essere pericoloso e può causare",
-    "damage to your battery or charger!": "danni alla batteria o al caricabatterie!",
-    "Charge Current Override": "Override della Corrente di Carica",
-    "Display Color Preset": "Preimpostazione colore",
-    "Basic": "Base",
-    "Saturated": "Saturo",
-    "Washed": "Sbiadito",
-    "Natural": "Naturale",
-    "Vivid": "Vivace",
-
-    "CPU Governor Minimum Frequency": "Frequenza minima del Governor della CPU",
-    " Usage of unsafe display": "L'uso di frequenze di aggiornamento",
-    "refresh rates may cause stress": "le frequenze di aggiornamento possono causare stress",
-    "or damage to your display! ": "o danni al display!",
-    "Proceed at your own risk!": "Procedi a tuo rischio e pericolo!",
-    "Max Handheld Display": "Display Massimo in Modalità Portatile",
-    "Max Handheld Display Hz": "Hz max in modalità portatile",
-    "Display Clock": "Frequenza del Display",
-    " Adjust the display voltage": "Regola la tensione del display",
-    "with caution to avoid damage": "con cautela per evitare danni",
-    "to your display panel! ": "al pannello del display!",
-    "Display Voltage": "Tensione display",
-
-    "Thermal Throttle Limit": "Limite Termico",
-    "Official Rating": "Rating Ufficiale",
-    "TDP Threshold": "Soglia TDP",
-    "Power": "Potenza",
-    "HP Mode": "Modalità HP",
-
-    "DVB Shift": "Offset DVB",
-    "SoC Max Volt": "Tensione massima SoC",
-    "Step Mode": "Modalità passo",
-    "RAM VDD2 Voltage": "Tensione RAM VDD2",
-    "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM",
-    "Voltage": "Voltaggio",
-    "RAM Frequency Editor": "Editor della frequenza RAM",
-    "Ram Max Clock": "Frequenza Massima Ram",
-    "RAM Latency Editor": "Editor della Latenza RAM",
-    "RAM Timing Reductions": "Riduzioni dei Timing della RAM",
-    "Memory Timings": "Timing di Memoria",
-    "Advanced": "Avanzato",
-    "t6 tRTW Fine Tune": "Regolazione Fine t6 tRTW",
-    "tRTW Fine Tune": "Regolazione Fine tRTW",
-    "t7 tWTR Fine Tune": "Regolazione Fine t7 tWTR",
-    "tWTR Fine Tune": "Regolazione Fine tWTR",
-    "Memory Latencies": "Latenza della Memoria",
-    "Read Latency": "Latenza di Lettura",
-    "Write Latency": "Latenza di Scrittura",
-    "High speedo needed!": "Alto Valore Speedo Necessario!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL altissimo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL altissimo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL altissimo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (richiede Speedo/PLL estremo)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (richiede Speedo/PLL estremo)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (richiede Speedo/PLL estremo)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "Frequenza CPU in Boost",
-    "CPU UV": "Undervolt CPU",
-    "CPU Unlock": "Sblocco della CPU",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Voltaggio massimo della CPU",
-    "CPU Max Clock": "Frequenza massima della CPU",
-    "Extreme UV Table": "Tabella UV estremo",
-    "CPU UV Table": "Tabella UV della CPU",
-    "CPU Low UV": "CPU UV Bassa Frequenza",
-    "CPU High UV": "CPU UV Alta Frequenza",
-    "CPU Low VMIN": "CPU VMIN Bassa Frequenza",
-    "CPU High VMIN": "CPU VMIN Alta Frequenza",
-
-    "No Undervolt": "Nessun Undervolt",
-    "SLT Table": "Tabella SLT",
-    "HiOPT Table": "Tabella HiOPT",
-    "GPU Undervolt Table": "Tabella di Undervolt GPU",
-    "GPU Minimum Voltage": "Voltaggio Minimo della GPU",
-    "Calculate GPU Vmin": "Calcola GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Voltaggio massimo della GPU",
-    "GPU Voltage Offset": "Offset di Voltaggio della GPU",
-    "GPU DVFS Mode": "Modalità DVFS GPU",
-    "GPU DVFS Offset": "Offset DVFS della GPU",
-    "GPU Voltage Table": "Tabella delle Tensioni della GPU",
-    "GPU Custom Table (mV)": "Tabella GPU Personalizzata (mV)",
-    "Official Service": "Servizio ufficiale",
-    "96.6% limit": "Limite del 96,6%",
-    "99.7% limit": "Limite del 99,7%",
-    " Setting GPU Clocks past": "Impostare le frequenze GPU oltre",
-    "1228MHz without a proper undervolt": "1228 MHz senza undervolt appropriato",
-    "can cause degradation or damage": "può causare degrado o danni",
-    "to your console!": "alla tua console!",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT",
-    "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare",
-    "permanent damage to your Switch!": "danni permanenti alla tua Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz su",
-    "SLT or HiOPT can cause ": "SLT o HiOPT possono causare",
-
-    "Default (Mariko)": "Predefinito (Mariko)",
-    "Default (Erista)": "Predefinito (Erista)",
-    "Rating": "Valutazione",
-    "Safe Max (Mariko)": "Massimo Sicuro (Mariko)",
-    "Safe Max (Erista)": "Massimo Sicuro (Erista)",
-
-    "Voltages": "Tensioni",
-    "RAM Voltage:": "Tensione RAM:",
-    "Display Voltage:": "Tensione display:",
-    "Temperatures": "Temperature",
-    "PLLX Temp:": "PLLX Temp:",
-    "AOTAG Temp:": "AOTAG Temp:",
-    "BQ24193 Temp:": "BQ24193 Temp:",
-    "Normal": "Normale",
-    "Warm": "Caldo",
-    "Hot": "Molto caldo",
-    "Overheat": "Surriscaldamento",
-    "Not Patched": "Non patchato",
-    "Invalid": "Non valido",
-    "RAM Bandwidth": "Banda RAM",
-    "RAM BW (Peak):": "BW RAM (Picco):",
-    "RAM BW (All):": "BW RAM (Tutto):",
-    "RAM BW (CPU):": "BW RAM (CPU):",
-    "RAM BW (GPU):": "BW RAM (GPU):",
-    "Hardware Info": "Info hardware",
-    "Console Type:": "Tipo di console:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "Modulo DRAM: ",
-    "Software Info": "Info software",
-    "KIP version:": "Versione KIP:",
-    "sys-dock status:": "stato di sys-dock",
-    "SaltyNX status:": "Stato di SaltyNX:",
-    "RR Display status:": "Stato del RR:",
-    "Wafer Position:": "Posizione nel Wafer:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Modulo:",
-    "Board": "Scheda",
-    "Display": "Schermo",
-
-    "Developers": "Sviluppatori",
-    "Contributors": "Collaboratori",
-    "Testers": "Tester",
-    "Translators": "Traduttori",
-    "Special Thanks": "Un Ringraziamento Speciale",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "Compilazione con funzionalità minime",
-    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE"
-}

dist/config/horizon-oc/lang/lang/ja.json

@@ -1,215 +0,0 @@
-{
-    "Information": "情報",
-    "Unknown": "不明",
-    "Installed": "インストール済み",
-    "Not Installed": "インストールされていません",
-    "Default": "デフォルト",
-    "Do Not Override": "上書きしないでください",
-    "Do not override": "上書きしないでください",
-    "Disabled": "無効",
-    "Enabled": "有効",
-    "Enabled (Default)": "有効 (デフォルト)",
-    "Enable": "有効にする",
-    "Fatal error": "致命的なエラー",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk sysmodule に接続できませんでした。\\n\\n",
-    "Please make sure everything is\\n\\n": "すべてが正しいことを確認してください\\n\\n",
-    "correctly installed and enabled.": "正しくインストールされ、有効になっています。",
-
-    "Edit App Profile": "アプリプロファイルの編集",
-    "Edit Global Profile": "グローバルプロファイルの編集",
-    "Temporary Overrides": "一時的なオーバーライド",
-    "Temporary Overrides ": "一時的なオーバーライド",
-    "  Reset": " リセット",
-    "Settings": "設定",
-    "About": "について",
-    "Credits": "クレジット",
-
-    "Application changed\\n\\n": "アプリケーションが変更されました\\n\\n",
-    "The running application changed\\n\\n": "実行中のアプリケーションが変更されました\\n\\n",
-    "while editing was going on.": "編集を進めている最中でした。",
-
-    "Sleep Mode": "スリープモード",
-    "Stock": "標準",
-    "Dev OC": "開発OC",
-    "Boost Mode": "ブーストモード",
-    "Safe Max": "セーフマックス",
-    "Unsafe Max": "危険なマックス",
-    "Absolute Max": "絶対最大値",
-    "Handheld Safe Max": "手持ち安全マックス",
-
-    "General Settings": "一般設定",
-    "Governor Settings": "ガバナーの設定",
-    "Safety Settings": "安全設定",
-    "Save KIP Settings": "KIP 設定の保存",
-    "RAM Settings": "RAM設定",
-    "CPU Settings": "CPUの設定",
-    "GPU Settings": "GPU設定",
-    "Display Settings": "表示設定",
-    "Experimental Settings": "実験的設定",
-    "Experimental": "実験的",
-
-    " Settings marked in blue": "青色でマークされた設定",
-    "don't require a reboot to apply!": "再起動なしで適用できます！",
-    "You can also press  to show": " を押して表示することもできます",
-    "information about each setting.": "各設定の情報を。",
-
-    " Experimental Settings are incomplete ": "実験的設定は未完成です",
-    "and may not work correctly or at all!": "正しく動作しない場合があります！",
-    "Here be dragons!": "ここにドラゴンあり！",
-
-    "RAM Voltage Display Mode": "RAM電圧表示モード",
-    "RAM Display Unit": "RAM表示単位",
-    "Polling Interval": "ポーリング間隔",
-
-    "GPU Scheduling Override Method": "GPU スケジューリング オーバーライド メソッド",
-    "GPU Scheduling Override": "GPU スケジュールのオーバーライド",
-    "GPU Boot Volt": "GPU起動電圧",
-    "GPU Boot Voltage": "GPU起動電圧",
-    "Memory Frequency Measurement Mode": "メモリ周波数測定モード",
-    " Overriding the charge current": "充電電流のオーバーライド",
-    "can be dangerous and may cause": "危険であり、原因となる可能性があります",
-    "damage to your battery or charger!": "バッテリーまたは充電器が損傷します。",
-    "Charge Current Override": "充電電流オーバーライド",
-    "Display Color Preset": "ディスプレイカラープリセット",
-    "Basic": "ベーシック",
-    "Saturated": "鮮やか",
-    "Washed": "色あせ",
-    "Natural": "ナチュラル",
-    "Vivid": "ビビッド",
-
-    "CPU Governor Minimum Frequency": "CPU ガバナの最小周波数",
-    " Usage of unsafe display": "危険なリフレッシュレートの使用",
-    "refresh rates may cause stress": "リフレッシュレートがストレスを引き起こす可能性がある",
-    "or damage to your display! ": "ディスプレイに損傷を与えてしまいます。",
-    "Proceed at your own risk!": "自己責任で進めてください！",
-    "Max Handheld Display": "最大ハンドヘルドディスプレイ",
-    "Max Handheld Display Hz": "最大ハンドヘルドHz",
-    "Display Clock": "時計の表示",
-    " Adjust the display voltage": "ディスプレイ電圧を調整",
-    "with caution to avoid damage": "損傷を避けるため注意して",
-    "to your display panel! ": "ディスプレイパネルに！",
-    "Display Voltage": "ディスプレイ電圧",
-
-    "Thermal Throttle Limit": "サーマルスロットル制限",
-    "Official Rating": "公式評価",
-    "TDP Threshold": "TDP しきい値",
-    "Power": "パワー",
-    "HP Mode": "HPモード",
-
-    "DVB Shift": "DVBシフト",
-    "SoC Max Volt": "SoC最大電圧",
-    "Step Mode": "ステップモード",
-    "RAM VDD2 Voltage": "RAM VDD2 電圧",
-    "RAM VDDQ Voltage": "RAM VDDQ 電圧",
-    "Voltage": "電圧",
-    "RAM Frequency Editor": "RAM周波数エディター",
-    "Ram Max Clock": "ラムマックスクロック",
-    "RAM Latency Editor": "RAM レイテンシ エディター",
-    "RAM Timing Reductions": "RAM タイミングの削減",
-    "Memory Timings": "メモリタイミング",
-    "Advanced": "上級者向け",
-    "t6 tRTW Fine Tune": "t6 tRTW 微調整",
-    "tRTW Fine Tune": "tRTW 微調整",
-    "t7 tWTR Fine Tune": "t7 tWTR ファインチューン",
-    "tWTR Fine Tune": "tWTR ファインチューン",
-    "Memory Latencies": "メモリレイテンシ",
-    "Read Latency": "読み取りレイテンシー",
-    "Write Latency": "書き込みレイテンシ",
-    "High speedo needed!": "ハイスピードが必要です！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (エクストリーム Speedo/PLL が必要)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (エクストリーム Speedo/PLL が必要)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (エクストリーム Speedo/PLL が必要)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (とんでもない Speedo/PLL が必要)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (とんでもない Speedo/PLL が必要)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (とんでもない Speedo/PLL が必要)",
-    "JEDEC.": "JEDEC。",
-
-    "CPU Boost Clock": "CPUブーストクロック",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "CPUロック解除",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU最大電圧",
-    "CPU Max Clock": "CPU最大クロック",
-    "Extreme UV Table": "エクストリーム UV テーブル",
-    "CPU UV Table": "CPU UV テーブル",
-    "CPU Low UV": "CPU 低 UV",
-    "CPU High UV": "CPU 高 UV",
-    "CPU Low VMIN": "CPU 低 VMIN",
-    "CPU High VMIN": "CPU 高 VMIN",
-
-    "No Undervolt": "アンダーボルトなし",
-    "SLT Table": "SLTテーブル",
-    "HiOPT Table": "HiOPT テーブル",
-    "GPU Undervolt Table": "GPUアンダーボルトテーブル",
-    "GPU Minimum Voltage": "GPUの最小電圧",
-    "Calculate GPU Vmin": "GPU Vmin を計算する",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU最大電圧",
-    "GPU Voltage Offset": "GPU電圧オフセット",
-    "GPU DVFS Mode": "GPU DVFS モード",
-    "GPU DVFS Offset": "GPU DVFS オフセット",
-    "GPU Voltage Table": "GPU電圧テーブル",
-    "GPU Custom Table (mV)": "GPUカスタムテーブル(mV)",
-    "Official Service": "正式サービス",
-    "96.6% limit": "96.6%制限",
-    "99.7% limit": "99.7%制限",
-    " Setting GPU Clocks past": "GPUクロックを超えて設定",
-    "1228MHz without a proper undervolt": "適切なアンダーボルトなしで1228MHz",
-    "can cause degradation or damage": "劣化や損傷を引き起こす可能性があります",
-    "to your console!": "あなたのコンソールに！",
-    "1075MHz without UV, 1152MHz on SLT": "UVなしで1075MHz、SLTで1152MHz",
-    "or 1228MHz on HiOPT can cause ": "HiOPT で 1228MHz を使用すると問題が発生する可能性があります。",
-    "permanent damage to your Switch!": "Switch に永久的なダメージを与えます!",
-    "921MHz without UV and 960MHz on": "921MHz（UVなし）、960MHz（UVあり）",
-    "SLT or HiOPT can cause ": "SLT または HiOPT が原因となる可能性があります",
-
-    "Default (Mariko)": "デフォルト（マリコ）",
-    "Default (Erista)": "デフォルト（エリスタ）",
-    "Rating": "評価",
-    "Safe Max (Mariko)": "セーフマックス（マリコ）",
-    "Safe Max (Erista)": "セーフマックス(エリスタ)",
-
-    "Voltages": "電圧",
-    "RAM Voltage:": "RAM電圧:",
-    "Display Voltage:": "ディスプレイ電圧:",
-    "Temperatures": "温度",
-    "PLLX Temp:": "PLLX 温度:",
-    "AOTAG Temp:": "AOTAG 温度:",
-    "BQ24193 Temp:": "BQ24193 温度:",
-    "Normal": "正常",
-    "Warm": "温かい",
-    "Hot": "熱い",
-    "Overheat": "過熱",
-    "Not Patched": "パッチなし",
-    "Invalid": "無効",
-    "RAM Bandwidth": "RAM帯域幅",
-    "RAM BW (Peak):": "RAM帯域(最大):",
-    "RAM BW (All):": "RAM帯域(全):",
-    "RAM BW (CPU):": "RAM帯域(CPU):",
-    "RAM BW (GPU):": "RAM帯域(GPU):",
-    "Hardware Info": "ハードウェア情報",
-    "Console Type:": "コンソールタイプ:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "DRAMモジュール: ",
-    "Software Info": "ソフトウェア情報",
-    "KIP version:": "KIPバージョン:",
-    "sys-dock status:": "システムドックのステータス:",
-    "SaltyNX status:": "SaltyNX ステータス:",
-    "RR Display status:": "RR 表示ステータス:",
-    "Wafer Position:": "ウェーハの位置:",
-    "IDDQ:": "IDQ:",
-    "Module: ": "モジュール:",
-    "Board": "理事会",
-    "Display": "ディスプレイ",
-
-    "Developers": "開発者",
-    "Contributors": "貢献者",
-    "Testers": "テスター",
-    "Translators": "翻訳者",
-    "Special Thanks": "特別な感謝の気持ち",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "最小限の機能でコンパイルする",
-    "THE BEER-WARE LICENSE": "ビール製品ライセンス"
-}

dist/config/horizon-oc/lang/lang/jp.json

@@ -1,146 +0,0 @@
-{
-    "Information": "Information",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module:",
-    "sys-dock status:": "sys-dock status:",
-    "SaltyNX status:": "SaltyNX status:",
-    "RR Display status:": "RR Display status:",
-    "Wafer Position:": "Wafer Position:",
-    "Credits": "Credits",
-    "Developers": "Developers",
-    "Contributors": "Contributors",
-    "Testers": "Testers",
-    "Special Thanks": "Special Thanks",
-    "Unknown": "Unknown",
-    "Installed": "Installed",
-    "Not Installed": "Not Installed",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE",
-    "Default": "Default",
-    "Do Not Override": "Do Not Override",
-    "Disabled": "Disabled",
-    "Enabled": "Enabled",
-    " \\ue0e3 Reset": "\\ue0e3 Reset",
-    "Display": "Display",
-    "Application changed\\n\\n": "Application changed\\n\\n",
-    "The running application changed\\n\\n": "The running application changed\\n\\n",
-    "while editing was going on.": "while editing was going on.",
-    "App ID": "App ID",
-    "Profile": "Profile",
-    "Board": "Board",
-    "USB Charger": "USB Charger",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Could not connect to hoc-clk sysmodule.\\n\\n",
-    "Please make sure everything is\\n\\n": "Please make sure everything is\\n\\n",
-    "correctly installed and enabled.": "correctly installed and enabled.",
-    "Fatal error": "Fatal error",
-    "Temporary Overrides ": "Temporary Overrides",
-    "Sleep Mode": "Sleep Mode",
-    "Stock": "Stock",
-    "Dev OC": "Dev OC",
-    "Boost Mode": "Boost Mode",
-    "Safe Max": "Safe Max",
-    "Unsafe Max": "Unsafe Max",
-    "Absolute Max": "Absolute Max",
-    "Handheld": "Handheld",
-    "Handheld Safe Max": "Handheld Safe Max",
-    "Docked": "Docked",
-    "Enable": "Enable",
-    "Edit App Profile": "Edit App Profile",
-    "Edit Global Profile": "Edit Global Profile",
-    "Temporary Overrides": "Temporary Overrides",
-    "Settings": "Settings",
-    "About": "About",
-    "Compiling with minimal features": "Compiling with minimal features",
-    "General Settings": "General Settings",
-    "Governor Settings": "Governor Settings",
-    "Safety Settings": "Safety Settings",
-    "Save KIP Settings": "Save KIP Settings",
-    "RAM Settings": "RAM Settings",
-    "CPU Settings": "CPU Settings",
-    "GPU Settings": "GPU Settings",
-    "Display Settings": "Display Settings",
-    "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "GPU Scheduling Override Method",
-    "can be dangerous and may cause": "can be dangerous and may cause",
-    "damage to your battery or charger!": "damage to your battery or charger!",
-    "Charge Current Override": "Charge Current Override",
-    "RAM Voltage Display Mode": "RAM Voltage Display Mode",
-    "Polling Interval": "Polling Interval",
-    "CPU Governor Minimum Frequency": "CPU Governor Minimum Frequency",
-    "refresh rates may cause stress": "refresh rates may cause stress",
-    "or damage to your display! ": "or damage to your display!",
-    "Proceed at your own risk!": "Proceed at your own risk!",
-    "Max Handheld Display": "Max Handheld Display",
-    "Display Clock": "Display Clock",
-    "Official Rating": "Official Rating",
-    "TDP Threshold": "TDP Threshold",
-    "Power": "Power",
-    "Thermal Throttle Limit": "Thermal Throttle Limit",
-    "HP Mode": "HP Mode",
-    "Default (Mariko)": "Default (Mariko)",
-    "Default (Erista)": "Default (Erista)",
-    "Rating": "Rating",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
-    "RAM VDD2 Voltage": "RAM VDD2 Voltage",
-    "Voltage": "Voltage",
-    "RAM VDDQ Voltage": "RAM VDDQ Voltage",
-    "RAM Frequency Editor": "RAM Frequency Editor",
-    "JEDEC.": "JEDEC.",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Needs extreme Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Needs extreme Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Needs extreme Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Needs ridiculous Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Needs ridiculous Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Needs ridiculous Speedo/PLL)",
-    "Ram Max Clock": "Ram Max Clock",
-    "RAM Latency Editor": "RAM Latency Editor",
-    "RAM Timing Reductions": "RAM Timing Reductions",
-    "Memory Timings": "Memory Timings",
-    "tREFI": "tREFI",
-    "Advanced": "Advanced",
-    "t6 tRTW Fine Tune": "t6 tRTW Fine Tune",
-    "tRTW Fine Tune": "tRTW Fine Tune",
-    "t7 tWTR Fine Tune": "t7 tWTR Fine Tune",
-    "tWTR Fine Tune": "tWTR Fine Tune",
-    "Memory Latencies": "Memory Latencies",
-    "Read Latency": "Read Latency",
-    "Write Latency": "Write Latency",
-    "CPU Boost Clock": "CPU Boost Clock",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "CPU Unlock",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU Max Voltage",
-    "CPU Max Clock": "CPU Max Clock",
-    "Extreme UV Table": "Extreme UV Table",
-    "CPU UV Table": "CPU UV Table",
-    "CPU Low UV": "CPU Low UV",
-    "CPU High UV": "CPU High UV",
-    "CPU Low VMIN": "CPU Low VMIN",
-    "CPU High VMIN": "CPU High VMIN",
-    "No Undervolt": "No Undervolt",
-    "SLT Table": "SLT Table",
-    "HiOPT Table": "HiOPT Table",
-    "GPU Undervolt Table": "GPU Undervolt Table",
-    "GPU Minimum Voltage": "GPU Minimum Voltage",
-    "Calculate GPU Vmin": "Calculate GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU Maximum Voltage",
-    "GPU Voltage Offset": "GPU Voltage Offset",
-    "Do not override": "Do not override",
-    "Enabled (Default)": "Enabled (Default)",
-    "96.6% limit": "96.6% limit",
-    "99.7% limit": "99.7% limit",
-    "GPU Scheduling Override": "GPU Scheduling Override",
-    "Official Service": "Official Service",
-    "GPU DVFS Mode": "GPU DVFS Mode",
-    "GPU DVFS Offset": "GPU DVFS Offset",
-    "GPU Voltage Table": "GPU Voltage Table",
-    "GPU Custom Table (mV)": "GPU Custom Table (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz without UV, 1152MHz on SLT",
-    "or 1228MHz on HiOPT can cause ": "or 1228MHz on HiOPT can cause",
-    "permanent damage to your Switch!": "permanent damage to your Switch!",
-    "921MHz without UV and 960MHz on": "921MHz without UV and 960MHz on",
-    "SLT or HiOPT can cause ": "SLT or HiOPT can cause"
-}

dist/config/horizon-oc/lang/lang/ko.json

@@ -1,215 +0,0 @@
-{
-    "Information": "정보",
-    "Unknown": "알 수 없음",
-    "Installed": "설치됨",
-    "Not Installed": "설치되지 않음",
-    "Default": "기본값",
-    "Do Not Override": "재정의하지 마십시오",
-    "Do not override": "재정의하지 않음",
-    "Disabled": "비활성화",
-    "Enabled": "활성화됨",
-    "Enabled (Default)": "활성화됨(기본값)",
-    "Enable": "활성화",
-    "Fatal error": "치명적인 오류",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk 시스템 모듈에 연결할 수 없습니다.\\n\\n",
-    "Please make sure everything is\\n\\n": "모든 것이 올바른지 확인하십시오.\\n\\n",
-    "correctly installed and enabled.": "올바르게 설치되고 활성화되었습니다.",
-
-    "Edit App Profile": "앱 프로필 편집",
-    "Edit Global Profile": "글로벌 프로필 편집",
-    "Temporary Overrides": "임시 재정의",
-    "Temporary Overrides ": "임시 재정의",
-    "  Reset": " 재설정",
-    "Settings": "설정",
-    "About": "소개",
-    "Credits": "크레딧",
-
-    "Application changed\\n\\n": "애플리케이션이 변경되었습니다.\\n\\n",
-    "The running application changed\\n\\n": "실행 중인 애플리케이션이 변경되었습니다.\\n\\n",
-    "while editing was going on.": "편집이 진행되는 동안.",
-
-    "Sleep Mode": "절전 모드",
-    "Stock": "기본 설정",
-    "Dev OC": "개발 OC",
-    "Boost Mode": "부스트 모드",
-    "Safe Max": "안전함 최대값",
-    "Unsafe Max": "불안정 최대값",
-    "Absolute Max": "절대 최대값",
-    "Handheld Safe Max": "휴대모드 안전함 최대값",
-
-    "General Settings": "일반 설정",
-    "Governor Settings": "거버너 설정",
-    "Safety Settings": "안전 설정",
-    "Save KIP Settings": "KIP 설정 저장",
-    "RAM Settings": "RAM 설정",
-    "CPU Settings": "CPU 설정",
-    "GPU Settings": "GPU 설정",
-    "Display Settings": "디스플레이 설정",
-    "Experimental Settings": "실험적 설정",
-    "Experimental": "실험적",
-
-    " Settings marked in blue": "파란색으로 표시된 설정은",
-    "don't require a reboot to apply!": "재부팅 없이 적용됩니다!",
-    "You can also press  to show": "을 눌러 표시할 수도 있습니다",
-    "information about each setting.": "각 설정에 대한 정보를.",
-
-    " Experimental Settings are incomplete ": "실험적 설정은 미완성입니다",
-    "and may not work correctly or at all!": "올바르게 작동하지 않을 수 있습니다!",
-    "Here be dragons!": "여기에 드래곤이 있습니다!",
-
-    "RAM Voltage Display Mode": "RAM 전압 표시 모드",
-    "RAM Display Unit": "RAM 표시 단위",
-    "Polling Interval": "폴링 간격",
-
-    "GPU Scheduling Override Method": "GPU 스케줄링 재정의 방법",
-    "GPU Scheduling Override": "GPU 스케줄링 재정의",
-    "GPU Boot Volt": "GPU 부팅 전압",
-    "GPU Boot Voltage": "GPU 부팅 전압",
-    "Memory Frequency Measurement Mode": "메모리 주파수 측정 모드",
-    " Overriding the charge current": "충전 전류 오버라이드",
-    "can be dangerous and may cause": "위험할 수 있고 원인이 될 수 있습니다.",
-    "damage to your battery or charger!": "배터리나 충전기가 손상되었습니다!",
-    "Charge Current Override": "충전 전류 오버라이드",
-    "Display Color Preset": "디스플레이 색상 프리셋",
-    "Basic": "기본",
-    "Saturated": "채도 높음",
-    "Washed": "연한색",
-    "Natural": "자연스러움",
-    "Vivid": "선명함",
-
-    "CPU Governor Minimum Frequency": "CPU 거버너 최소 주파수",
-    " Usage of unsafe display": "안전하지 않은 주사율 사용",
-    "refresh rates may cause stress": "디스플레이 주사율 빈도 변경은",
-    "or damage to your display! ": "기기에 손상이 발생될 수 있습니다!",
-    "Proceed at your own risk!": "책임하에 주의해서 사용하십시오!",
-    "Max Handheld Display": "최대 휴대용 디스플레이",
-    "Max Handheld Display Hz": "최대 휴대용 Hz",
-    "Display Clock": "디스플레이 클럭",
-    " Adjust the display voltage": "디스플레이 전압 조정",
-    "with caution to avoid damage": "손상을 피하기 위해 주의하여",
-    "to your display panel! ": "디스플레이 패널에!",
-    "Display Voltage": "디스플레이 전압",
-
-    "Thermal Throttle Limit": "열 스로틀 한계",
-    "Official Rating": "공식 등급",
-    "TDP Threshold": "TDP 임계값",
-    "Power": "힘",
-    "HP Mode": "HP 모드",
-
-    "DVB Shift": "DVB 시프트",
-    "SoC Max Volt": "SoC 최대 전압",
-    "Step Mode": "스텝 모드",
-    "RAM VDD2 Voltage": "RAM VDD2 전압",
-    "RAM VDDQ Voltage": "RAM VDDQ 전압",
-    "Voltage": "전압",
-    "RAM Frequency Editor": "RAM 주파수 편집기",
-    "Ram Max Clock": "RAM 최대 클럭",
-    "RAM Latency Editor": "RAM 지연 시간 편집기",
-    "RAM Timing Reductions": "RAM 타이밍 편집기",
-    "Memory Timings": "메모리 타이밍",
-    "Advanced": "고급",
-    "t6 tRTW Fine Tune": "t6 tRTW 미세 조정",
-    "tRTW Fine Tune": "tRTW 미세 조정",
-    "t7 tWTR Fine Tune": "t7 tWTR 미세 조정",
-    "tWTR Fine Tune": "tWTR 미세 조정",
-    "Memory Latencies": "메모리 지연 시간",
-    "Read Latency": "읽기 지연 시간",
-    "Write Latency": "쓰기 지연 시간",
-    "High speedo needed!": "높은 스피도값이 필요합니다!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz(극단적인 Speedo/PLL 필요)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz(극단적인 Speedo/PLL 필요)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz(극단적인 Speedo/PLL 필요)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz(터무니없는 Speedo/PLL 필요)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz(터무니없는 Speedo/PLL 필요)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz(터무니없는 Speedo/PLL 필요)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "CPU 부스트 클럭",
-    "CPU UV": "CPU 언더볼트",
-    "CPU Unlock": "CPU 잠금 해제",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "CPU 최대 전압",
-    "CPU Max Clock": "CPU 최대 클럭",
-    "Extreme UV Table": "익스트림 테이블",
-    "CPU UV Table": "CPU 언더볼트 테이블",
-    "CPU Low UV": "CPU 저주파 언더볼트",
-    "CPU High UV": "CPU 고주파 언더볼트",
-    "CPU Low VMIN": "CPU 저주파 최소 전압",
-    "CPU High VMIN": "CPU 고주파 최소 전압",
-
-    "No Undervolt": "언더볼트 없음",
-    "SLT Table": "SLT 테이블",
-    "HiOPT Table": "HiOPT 테이블",
-    "GPU Undervolt Table": "GPU 언더볼트 테이블",
-    "GPU Minimum Voltage": "GPU 최소 전압",
-    "Calculate GPU Vmin": "GPU Vmin 계산",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU 최대 전압",
-    "GPU Voltage Offset": "GPU 전압 오프셋",
-    "GPU DVFS Mode": "GPU DVFS 모드",
-    "GPU DVFS Offset": "GPU DVFS 오프셋",
-    "GPU Voltage Table": "GPU 전압 테이블",
-    "GPU Custom Table (mV)": "GPU 사용자 정의 테이블(mV)",
-    "Official Service": "공식 서비스",
-    "96.6% limit": "96.6% 한도",
-    "99.7% limit": "99.7% 한도",
-    " Setting GPU Clocks past": "GPU 클럭을 초과 설정",
-    "1228MHz without a proper undervolt": "적절한 언더볼트 없이 1228MHz",
-    "can cause degradation or damage": "열화 또는 손상을 유발할 수 있습니다",
-    "to your console!": "콘솔에!",
-    "1075MHz without UV, 1152MHz on SLT": "UV 없이 1075MHz, SLT에서 1152MHz",
-    "or 1228MHz on HiOPT can cause ": "또는 HiOPT에서 1228MHz를 사용하면",
-    "permanent damage to your Switch!": "스위치가 영구적으로 손상될 수 있습니다!",
-    "921MHz without UV and 960MHz on": "UV가 없는 경우 921MHz, 켜진 경우에는 960MHz",
-    "SLT or HiOPT can cause ": "SLT 또는 HiOPT는 다음을 유발할 수 있습니다.",
-
-    "Default (Mariko)": "기본값(마리코)",
-    "Default (Erista)": "기본값(에리스타)",
-    "Rating": "표준값",
-    "Safe Max (Mariko)": "안전함 최대치(마리코)",
-    "Safe Max (Erista)": "안전함 최대치(에리스타)",
-
-    "Voltages": "전압",
-    "RAM Voltage:": "RAM 전압:",
-    "Display Voltage:": "디스플레이 전압:",
-    "Temperatures": "온도",
-    "PLLX Temp:": "PLLX 온도:",
-    "AOTAG Temp:": "AOTAG 온도:",
-    "BQ24193 Temp:": "BQ24193 온도:",
-    "Normal": "정상",
-    "Warm": "따뜻함",
-    "Hot": "뜨거움",
-    "Overheat": "과열",
-    "Not Patched": "패치 안 됨",
-    "Invalid": "유효하지 않음",
-    "RAM Bandwidth": "RAM 대역폭",
-    "RAM BW (Peak):": "RAM 대역폭 (최대):",
-    "RAM BW (All):": "RAM 대역폭 (전체):",
-    "RAM BW (CPU):": "RAM 대역폭 (CPU):",
-    "RAM BW (GPU):": "RAM 대역폭 (GPU):",
-    "Hardware Info": "하드웨어 정보",
-    "Console Type:": "콘솔 유형:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "DRAM 모듈: ",
-    "Software Info": "소프트웨어 정보",
-    "KIP version:": "KIP 버전:",
-    "sys-dock status:": "sys-dock 상태:",
-    "SaltyNX status:": "SaltyNX 상태:",
-    "RR Display status:": "RR 표시 상태:",
-    "Wafer Position:": "웨이퍼 위치:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "모듈:",
-    "Board": "보드",
-    "Display": "디스플레이",
-
-    "Developers": "개발자",
-    "Contributors": "기여자",
-    "Testers": "테스터",
-    "Translators": "번역자",
-    "Special Thanks": "특별한 분",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%umV",
-    "Compiling with minimal features": "최소한의 기능으로 컴파일하기",
-    "THE BEER-WARE LICENSE": "맥주 제품 라이센스"
-}

dist/config/horizon-oc/lang/lang/nl.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Informatie",
-    "Unknown": "Onbekend",
-    "Installed": "Geïnstalleerd",
-    "Not Installed": "Niet geïnstalleerd",
-    "Default": "Standaard",
-    "Do Not Override": "Niet overschrijven",
-    "Do not override": "Niet overschrijven",
-    "Disabled": "Uitgeschakeld",
-    "Enabled": "Ingeschakeld",
-    "Enabled (Default)": "Ingeschakeld (standaard)",
-    "Enable": "Inschakelen",
-    "Fatal error": "Fatale fout",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Kan geen verbinding maken met hoc-clk sysmodule.\\n\\n",
-    "Please make sure everything is\\n\\n": "Zorg ervoor dat alles in orde is\\n\\n",
-    "correctly installed and enabled.": "correct geïnstalleerd en ingeschakeld.",
-
-    "Edit App Profile": "App-profiel bewerken",
-    "Edit Global Profile": "Globaal profiel bewerken",
-    "Temporary Overrides": "Tijdelijke overschrijvingen",
-    "Temporary Overrides ": "Tijdelijke overschrijvingen",
-    "  Reset": " Opnieuw instellen",
-    "Settings": "Instellingen",
-    "About": "Over",
-    "Credits": "Kredieten",
-
-    "Application changed\\n\\n": "Applicatie gewijzigd\\n\\n",
-    "The running application changed\\n\\n": "De actieve applicatie is gewijzigd\\n\\n",
-    "while editing was going on.": "terwijl er werd bewerkt.",
-
-    "Sleep Mode": "Slaapmodus",
-    "Stock": "Voorraad",
-    "Dev OC": "Ontwikkelaar OC",
-    "Boost Mode": "Boost-modus",
-    "Safe Max": "Veilig Max",
-    "Unsafe Max": "Onveilig Max",
-    "Absolute Max": "Absoluut Max",
-    "Handheld Safe Max": "Handheld Veilig Max",
-
-    "General Settings": "Algemene instellingen",
-    "Governor Settings": "Gouverneur instellingen",
-    "Safety Settings": "Veiligheidsinstellingen",
-    "Save KIP Settings": "Sla KIP-instellingen op",
-    "RAM Settings": "RAM-instellingen",
-    "CPU Settings": "CPU-instellingen",
-    "GPU Settings": "GPU-instellingen",
-    "Display Settings": "Weergave-instellingen",
-    "Experimental Settings": "Experimentele instellingen",
-    "Experimental": "Experimenteel",
-
-    " Settings marked in blue": "In blauw gemarkeerde instellingen",
-    "don't require a reboot to apply!": "vereisen geen herstart om toe te passen!",
-    "You can also press  to show": "Druk ook op  om te tonen",
-    "information about each setting.": "informatie over elke instelling.",
-
-    " Experimental Settings are incomplete ": "Experimentele instellingen zijn onvolledig",
-    "and may not work correctly or at all!": "en werken mogelijk helemaal niet!",
-    "Here be dragons!": "Hier zijn draken!",
-
-    "RAM Voltage Display Mode": "Weergavemodus RAM-spanning",
-    "RAM Display Unit": "RAM-weergave-eenheid",
-    "Polling Interval": "Polling-interval",
-
-    "GPU Scheduling Override Method": "Methode voor het overschrijven van GPU-planning",
-    "GPU Scheduling Override": "GPU-planning negeren",
-    "GPU Boot Volt": "GPU opstartspanning",
-    "GPU Boot Voltage": "GPU opstartspanning",
-    "Memory Frequency Measurement Mode": "Geheugenfrequentie-meetmodus",
-    " Overriding the charge current": "Het overschrijven van de laadstroom",
-    "can be dangerous and may cause": "kan gevaarlijk zijn en kan veroorzaken",
-    "damage to your battery or charger!": "schade aan uw accu of lader!",
-    "Charge Current Override": "Laadstroom overschrijven",
-    "Display Color Preset": "Kleurvoorinstelling",
-    "Basic": "Basis",
-    "Saturated": "Verzadigd",
-    "Washed": "Uitgewassen",
-    "Natural": "Natuurlijk",
-    "Vivid": "Levendig",
-
-    "CPU Governor Minimum Frequency": "Minimale frequentie CPU-regelaar",
-    " Usage of unsafe display": "Het gebruik van onveilige schermfrequenties",
-    "refresh rates may cause stress": "vernieuwingsfrequenties kunnen stress veroorzaken",
-    "or damage to your display! ": "of schade aan uw display!",
-    "Proceed at your own risk!": "Ga verder op eigen risico!",
-    "Max Handheld Display": "Maximaal handheld-display",
-    "Max Handheld Display Hz": "Max handheld Hz",
-    "Display Clock": "Klok weergeven",
-    " Adjust the display voltage": "Pas de displayspanning aan",
-    "with caution to avoid damage": "met voorzichtigheid om schade te vermijden",
-    "to your display panel! ": "van uw beeldschermpaneel!",
-    "Display Voltage": "Displayspanning",
-
-    "Thermal Throttle Limit": "Thermische gaslimiet",
-    "Official Rating": "Officiële beoordeling",
-    "TDP Threshold": "TDP-drempel",
-    "Power": "Macht",
-    "HP Mode": "HP-modus",
-
-    "DVB Shift": "DVB-verschuiving",
-    "SoC Max Volt": "SoC max spanning",
-    "Step Mode": "Stappmodus",
-    "RAM VDD2 Voltage": "RAM VDD2-spanning",
-    "RAM VDDQ Voltage": "RAM VDDQ-spanning",
-    "Voltage": "Spanning",
-    "RAM Frequency Editor": "RAM-frequentie-editor",
-    "Ram Max Clock": "Ram Max-klok",
-    "RAM Latency Editor": "RAM-latentie-editor",
-    "RAM Timing Reductions": "RAM-timingreducties",
-    "Memory Timings": "Geheugentijden",
-    "Advanced": "Geavanceerd",
-    "t6 tRTW Fine Tune": "t6 tRTW Fijnafstemming",
-    "tRTW Fine Tune": "tRTW Fijnafstemming",
-    "t7 tWTR Fine Tune": "t7 tWTR Fijnafstemming",
-    "tWTR Fine Tune": "tWTR Fijnafstemming",
-    "Memory Latencies": "Geheugenlatenties",
-    "Read Latency": "Lees Latentie",
-    "Write Latency": "Schrijf latentie",
-    "High speedo needed!": "Hoge Speedo-waarde nodig!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (vereist extreme Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (vereist extreme Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (vereist extreme Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (heeft een belachelijke Speedo/PLL nodig)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (heeft een belachelijke Speedo/PLL nodig)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (heeft een belachelijke Speedo/PLL nodig)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "CPU-boostklok",
-    "CPU UV": "CPU-UV",
-    "CPU Unlock": "CPU-ontgrendeling",
-    "CPU VMIN": "CPU-VMIN",
-    "CPU Max Voltage": "Maximale CPU-spanning",
-    "CPU Max Clock": "CPU maximale klok",
-    "Extreme UV Table": "Extreme UV-tafel",
-    "CPU UV Table": "CPU UV-tabel",
-    "CPU Low UV": "CPU Lage UV",
-    "CPU High UV": "CPU Hoge UV",
-    "CPU Low VMIN": "CPU Lage VMIN",
-    "CPU High VMIN": "CPU Hoge VMIN",
-
-    "No Undervolt": "Geen ondervolt",
-    "SLT Table": "SLT-tabel",
-    "HiOPT Table": "HiOPT-tabel",
-    "GPU Undervolt Table": "GPU-undervolttabel",
-    "GPU Minimum Voltage": "GPU-minimale spanning",
-    "Calculate GPU Vmin": "Bereken GPU Vmin",
-    "GPU VMIN": "GPU-VMIN",
-    "GPU Maximum Voltage": "GPU maximale spanning",
-    "GPU Voltage Offset": "GPU-spanningsoffset",
-    "GPU DVFS Mode": "GPU DVFS-modus",
-    "GPU DVFS Offset": "GPU DVFS-offset",
-    "GPU Voltage Table": "GPU-spanningstabel",
-    "GPU Custom Table (mV)": "Aangepaste GPU-tabel (mV)",
-    "Official Service": "Officiële dienst",
-    "96.6% limit": "96,6% limiet",
-    "99.7% limit": "99,7% limiet",
-    " Setting GPU Clocks past": "GPU-klokken instellen voorbij",
-    "1228MHz without a proper undervolt": "1228MHz zonder goede onderspanning",
-    "can cause degradation or damage": "kan degradatie of schade veroorzaken",
-    "to your console!": "aan uw console!",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz zonder UV, 1152MHz op SLT",
-    "or 1228MHz on HiOPT can cause ": "of 1228MHz op HiOPT kan dit veroorzaken",
-    "permanent damage to your Switch!": "blijvende schade aan uw Switch!",
-    "921MHz without UV and 960MHz on": "921MHz zonder UV en 960MHz aan",
-    "SLT or HiOPT can cause ": "SLT of HiOPT kunnen dit veroorzaken",
-
-    "Default (Mariko)": "Standaard (Mariko)",
-    "Default (Erista)": "Standaard (Erista)",
-    "Rating": "Beoordeling",
-    "Safe Max (Mariko)": "Veilig Max (Mariko)",
-    "Safe Max (Erista)": "Veilige Max (Erista)",
-
-    "Voltages": "Spanningen",
-    "RAM Voltage:": "RAM-spanning:",
-    "Display Voltage:": "Displayspanning:",
-    "Temperatures": "Temperaturen",
-    "PLLX Temp:": "PLLX Temp:",
-    "AOTAG Temp:": "AOTAG Temp:",
-    "BQ24193 Temp:": "BQ24193 Temp:",
-    "Normal": "Normaal",
-    "Warm": "Warm",
-    "Hot": "Heet",
-    "Overheat": "Oververhitting",
-    "Not Patched": "Niet gepatcht",
-    "Invalid": "Ongeldig",
-    "RAM Bandwidth": "RAM-bandbreedte",
-    "RAM BW (Peak):": "RAM-BW (Piek):",
-    "RAM BW (All):": "RAM-BW (Alle):",
-    "RAM BW (CPU):": "RAM-BW (CPU):",
-    "RAM BW (GPU):": "RAM-BW (GPU):",
-    "Hardware Info": "Hardware-info",
-    "Console Type:": "Consoletype:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "DRAM-module: ",
-    "Software Info": "Software-info",
-    "KIP version:": "KIP-versie:",
-    "sys-dock status:": "sys-dock-status:",
-    "SaltyNX status:": "SaltyNX-status:",
-    "RR Display status:": "RR Weergavestatus:",
-    "Wafer Position:": "Waferpositie:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "module:",
-    "Board": "Bord",
-    "Display": "Weergave",
-
-    "Developers": "Ontwikkelaars",
-    "Contributors": "Bijdragers",
-    "Testers": "Testers",
-    "Translators": "Vertalers",
-    "Special Thanks": "Speciale dank",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "Compileren met minimale functies",
-    "THE BEER-WARE LICENSE": "DE LICENTIE VOOR BIERWAREN"
-}

dist/config/horizon-oc/lang/lang/pl.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Informacje",
-    "Unknown": "Nieznany",
-    "Installed": "Zainstalowany",
-    "Not Installed": "Nie zainstalowano",
-    "Default": "Domyślne",
-    "Do Not Override": "Nie zastępuj",
-    "Do not override": "Nie zastępuj",
-    "Disabled": "Wyłączony",
-    "Enabled": "Włączone",
-    "Enabled (Default)": "Włączone (domyślnie)",
-    "Enable": "Włącz",
-    "Fatal error": "Fatalny błąd",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Nie można połączyć się z modułem sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Upewnij się, że wszystko jest\\n\\n",
-    "correctly installed and enabled.": "poprawnie zainstalowany i włączony.",
-
-    "Edit App Profile": "Edytuj profil aplikacji",
-    "Edit Global Profile": "Edytuj profil globalny",
-    "Temporary Overrides": "Tymczasowe nadpisania",
-    "Temporary Overrides ": "Tymczasowe nadpisania",
-    "  Reset": " Zresetuj",
-    "Settings": "Ustawienia",
-    "About": "O",
-    "Credits": "Kredyty",
-
-    "Application changed\\n\\n": "Aplikacja została zmieniona\\n\\n",
-    "The running application changed\\n\\n": "Działająca aplikacja została zmieniona\\n\\n",
-    "while editing was going on.": "podczas gdy edycja była w toku.",
-
-    "Sleep Mode": "Tryb uśpienia",
-    "Stock": "Zapas",
-    "Dev OC": "Dev OC",
-    "Boost Mode": "Tryb wzmocnienia",
-    "Safe Max": "Bezpieczny maks",
-    "Unsafe Max": "Niebezpieczny maks",
-    "Absolute Max": "Absolutny maks",
-    "Handheld Safe Max": "Przenośny bezpieczny maks",
-
-    "General Settings": "Ustawienia ogólne",
-    "Governor Settings": "Ustawienia gubernatora",
-    "Safety Settings": "Ustawienia bezpieczeństwa",
-    "Save KIP Settings": "Zapisz ustawienia KIP",
-    "RAM Settings": "Ustawienia pamięci RAM",
-    "CPU Settings": "Ustawienia procesora",
-    "GPU Settings": "Ustawienia GPU",
-    "Display Settings": "Ustawienia wyświetlania",
-    "Experimental Settings": "Ustawienia eksperymentalne",
-    "Experimental": "Eksperymentalny",
-
-    " Settings marked in blue": "Ustawienia zaznaczone na niebiesko",
-    "don't require a reboot to apply!": "nie wymagają ponownego uruchomienia!",
-    "You can also press  to show": "Możesz też wcisnąć  aby wyświetlić",
-    "information about each setting.": "informacje o każdym ustawieniu.",
-
-    " Experimental Settings are incomplete ": "Ustawienia eksperymentalne są niekompletne",
-    "and may not work correctly or at all!": "i mogą w ogóle nie działać!",
-    "Here be dragons!": "Tu są smoki!",
-
-    "RAM Voltage Display Mode": "Tryb wyświetlania napięcia RAM",
-    "RAM Display Unit": "Jednostka wyświetlania RAM",
-    "Polling Interval": "Interwał odpytywania",
-
-    "GPU Scheduling Override Method": "Metoda obejścia harmonogramu GPU",
-    "GPU Scheduling Override": "Zastąpienie harmonogramu GPU",
-    "GPU Boot Volt": "Napięcie startowe GPU",
-    "GPU Boot Voltage": "Napięcie startowe GPU",
-    "Memory Frequency Measurement Mode": "Tryb pomiaru częstotliwości pamięci",
-    " Overriding the charge current": "Nadpisanie prądu ładowania",
-    "can be dangerous and may cause": "może być niebezpieczne i powodować",
-    "damage to your battery or charger!": "uszkodzenie akumulatora lub ładowarki!",
-    "Charge Current Override": "Obejście prądu ładowania",
-    "Display Color Preset": "Preset koloru",
-    "Basic": "Podstawowy",
-    "Saturated": "Nasycony",
-    "Washed": "Wyblakły",
-    "Natural": "Naturalny",
-    "Vivid": "Żywy",
-
-    "CPU Governor Minimum Frequency": "Minimalna częstotliwość regulatora procesora",
-    " Usage of unsafe display": "Użycie niebezpiecznych częstotliwości",
-    "refresh rates may cause stress": "częstotliwości odświeżania mogą powodować stres",
-    "or damage to your display! ": "lub uszkodzenie wyświetlacza!",
-    "Proceed at your own risk!": "Postępuj na własne ryzyko!",
-    "Max Handheld Display": "Maksymalny wyświetlacz ręczny",
-    "Max Handheld Display Hz": "Maks. Hz w trybie przenośnym",
-    "Display Clock": "Wyświetl zegar",
-    " Adjust the display voltage": "Dostosuj napięcie wyświetlacza",
-    "with caution to avoid damage": "ostrożnie, aby uniknąć uszkodzeń",
-    "to your display panel! ": "panelu wyświetlacza!",
-    "Display Voltage": "Napięcie wyświetlacza",
-
-    "Thermal Throttle Limit": "Limit przepustnicy termicznej",
-    "Official Rating": "Oficjalna ocena",
-    "TDP Threshold": "Próg TDP",
-    "Power": "Moc",
-    "HP Mode": "Tryb HP",
-
-    "DVB Shift": "Przesunięcie DVB",
-    "SoC Max Volt": "Maks. napięcie SoC",
-    "Step Mode": "Tryb krokowy",
-    "RAM VDD2 Voltage": "Napięcie pamięci RAM VDD2",
-    "RAM VDDQ Voltage": "Napięcie RAM VDDQ",
-    "Voltage": "Napięcie",
-    "RAM Frequency Editor": "Edytor częstotliwości RAM",
-    "Ram Max Clock": "Zegar Ram Max",
-    "RAM Latency Editor": "Edytor opóźnień pamięci RAM",
-    "RAM Timing Reductions": "Zmniejszenie taktowania pamięci RAM",
-    "Memory Timings": "Taktowanie pamięci",
-    "Advanced": "Zaawansowane",
-    "t6 tRTW Fine Tune": "t6 tRTW Dostrój",
-    "tRTW Fine Tune": "tRTW Dostosuj",
-    "t7 tWTR Fine Tune": "t7 tWTR Dostosuj",
-    "tWTR Fine Tune": "tWTR Dostosuj",
-    "Memory Latencies": "Opóźnienia pamięci",
-    "Read Latency": "Opóźnienie odczytu",
-    "Write Latency": "Opóźnienie zapisu",
-    "High speedo needed!": "Potrzebna duża wartość Speedo!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "Zegar wzmocnienia procesora",
-    "CPU UV": "Procesor UV",
-    "CPU Unlock": "Odblokowanie procesora",
-    "CPU VMIN": "Procesor VMIN",
-    "CPU Max Voltage": "Maksymalne napięcie procesora",
-    "CPU Max Clock": "Maks. zegar procesora",
-    "Extreme UV Table": "Ekstremalny stół UV",
-    "CPU UV Table": "Tabela UV procesora",
-    "CPU Low UV": "Niskie promieniowanie UV procesora",
-    "CPU High UV": "Wysokie promieniowanie UV procesora",
-    "CPU Low VMIN": "Niski poziom VMIN procesora",
-    "CPU High VMIN": "Wysoki poziom VMIN procesora",
-
-    "No Undervolt": "Brak Undervolta",
-    "SLT Table": "Stół SLT",
-    "HiOPT Table": "Stół HiOPT",
-    "GPU Undervolt Table": "Tabela niedoboru napięcia GPU",
-    "GPU Minimum Voltage": "Minimalne napięcie procesora graficznego",
-    "Calculate GPU Vmin": "Oblicz Vmin GPU",
-    "GPU VMIN": "VMIN GPU",
-    "GPU Maximum Voltage": "Maksymalne napięcie procesora graficznego",
-    "GPU Voltage Offset": "Przesunięcie napięcia GPU",
-    "GPU DVFS Mode": "Tryb DVFS procesora graficznego",
-    "GPU DVFS Offset": "Przesunięcie DVFS GPU",
-    "GPU Voltage Table": "Tabela napięć GPU",
-    "GPU Custom Table (mV)": "Tabela niestandardowa GPU (mV)",
-    "Official Service": "Oficjalny serwis",
-    "96.6% limit": "Limit 96,6%",
-    "99.7% limit": "Limit 99,7%",
-    " Setting GPU Clocks past": "Ustawianie zegarów GPU powyżej",
-    "1228MHz without a proper undervolt": "1228 MHz bez odpowiedniego undervolta",
-    "can cause degradation or damage": "może powodować degradację lub uszkodzenia",
-    "to your console!": "Twoją konsolę!",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz bez UV, 1152 MHz na SLT",
-    "or 1228MHz on HiOPT can cause ": "lub 1228 MHz na HiOPT może powodować",
-    "permanent damage to your Switch!": "trwałe uszkodzenie Switcha!",
-    "921MHz without UV and 960MHz on": "921 MHz bez UV i 960 MHz włączone",
-    "SLT or HiOPT can cause ": "Przyczyną mogą być SLT lub HiOPT",
-
-    "Default (Mariko)": "Domyślny (Mariko)",
-    "Default (Erista)": "Domyślny (Erista)",
-    "Rating": "Ocena",
-    "Safe Max (Mariko)": "Bezpieczny Max (Mariko)",
-    "Safe Max (Erista)": "Bezpieczny Max (Erista)",
-
-    "Voltages": "Napięcia",
-    "RAM Voltage:": "Napięcie RAM:",
-    "Display Voltage:": "Napięcie wyświetlacza:",
-    "Temperatures": "Temperatury",
-    "PLLX Temp:": "PLLX Temp:",
-    "AOTAG Temp:": "AOTAG Temp:",
-    "BQ24193 Temp:": "BQ24193 Temp:",
-    "Normal": "Normalny",
-    "Warm": "Ciepły",
-    "Hot": "Gorący",
-    "Overheat": "Przegrzanie",
-    "Not Patched": "Bez patcha",
-    "Invalid": "Nieprawidłowy",
-    "RAM Bandwidth": "Przepustowość RAM",
-    "RAM BW (Peak):": "BW RAM (Maks.):",
-    "RAM BW (All):": "BW RAM (Wszys.):",
-    "RAM BW (CPU):": "BW RAM (CPU):",
-    "RAM BW (GPU):": "BW RAM (GPU):",
-    "Hardware Info": "Info o sprzęcie",
-    "Console Type:": "Typ konsoli:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "Moduł DRAM: ",
-    "Software Info": "Info o oprogramowaniu",
-    "KIP version:": "Wersja KIP:",
-    "sys-dock status:": "stan sys-dock:",
-    "SaltyNX status:": "Stan SaltyNX:",
-    "RR Display status:": "Stan wyświetlacza:",
-    "Wafer Position:": "Pozycja wafla:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Moduł:",
-    "Board": "Deska",
-    "Display": "Wyświetlacz",
-
-    "Developers": "Deweloperzy",
-    "Contributors": "Współautorzy",
-    "Testers": "Testery",
-    "Translators": "Tłumacze",
-    "Special Thanks": "Specjalne podziękowania",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "Kompilacja z minimalnymi funkcjami",
-    "THE BEER-WARE LICENSE": "LICENCJA NA WYROBY PIWNE"
-}

dist/config/horizon-oc/lang/lang/pt.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Informação",
-    "Unknown": "Desconhecido",
-    "Installed": "Instalado",
-    "Not Installed": "Não instalado",
-    "Default": "Padrão",
-    "Do Not Override": "Não substituir",
-    "Do not override": "Não substitua",
-    "Disabled": "Desativado",
-    "Enabled": "Habilitado",
-    "Enabled (Default)": "Habilitado (padrão)",
-    "Enable": "Habilitar",
-    "Fatal error": "Erro fatal",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Não foi possível conectar-se ao sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Verifique se tudo está\\n\\n",
-    "correctly installed and enabled.": "corretamente instalado e ativado.",
-
-    "Edit App Profile": "Editar perfil do aplicativo",
-    "Edit Global Profile": "Editar perfil global",
-    "Temporary Overrides": "Substituições temporárias",
-    "Temporary Overrides ": "Substituições temporárias",
-    "  Reset": " Redefinir",
-    "Settings": "Configurações",
-    "About": "Sobre",
-    "Credits": "Créditos",
-
-    "Application changed\\n\\n": "Aplicativo alterado\\n\\n",
-    "The running application changed\\n\\n": "O aplicativo em execução foi alterado\\n\\n",
-    "while editing was going on.": "enquanto a edição estava acontecendo.",
-
-    "Sleep Mode": "Modo de suspensão",
-    "Stock": "Padrão de fábrica",
-    "Dev OC": "Desenvolvedor OC",
-    "Boost Mode": "Modo de reforço",
-    "Safe Max": "Máx. Seguro",
-    "Unsafe Max": "Máximo inseguro",
-    "Absolute Max": "Máximo absoluto",
-    "Handheld Safe Max": "Portátil Seguro Máx.",
-
-    "General Settings": "Configurações Gerais",
-    "Governor Settings": "Configurações do Governador",
-    "Safety Settings": "Configurações de segurança",
-    "Save KIP Settings": "Salvar configurações KIP",
-    "RAM Settings": "Configurações de RAM",
-    "CPU Settings": "Configurações de CPU",
-    "GPU Settings": "Configurações de GPU",
-    "Display Settings": "Configurações de exibição",
-    "Experimental Settings": "Configurações experimentais",
-    "Experimental": "Experimental",
-
-    " Settings marked in blue": "Configurações marcadas em azul",
-    "don't require a reboot to apply!": "não requerem reinicialização para aplicar!",
-    "You can also press  to show": "Pressione também  para mostrar",
-    "information about each setting.": "informações sobre cada configuração.",
-
-    " Experimental Settings are incomplete ": "Configurações experimentais incompletas",
-    "and may not work correctly or at all!": "e podem não funcionar corretamente!",
-    "Here be dragons!": "Aqui há dragões!",
-
-    "RAM Voltage Display Mode": "Modo de exibição de tensão RAM",
-    "RAM Display Unit": "Unidade de exibição de RAM",
-    "Polling Interval": "Intervalo de sondagem",
-
-    "GPU Scheduling Override Method": "Método de substituição de agendamento de GPU",
-    "GPU Scheduling Override": "Substituição de agendamento de GPU",
-    "GPU Boot Volt": "Tensão de inicialização da GPU",
-    "GPU Boot Voltage": "Tensão de inicialização da GPU",
-    "Memory Frequency Measurement Mode": "Modo de medição de frequência de memória",
-    " Overriding the charge current": "Substituir a corrente de carga",
-    "can be dangerous and may cause": "pode ser perigoso e causar",
-    "damage to your battery or charger!": "danos à sua bateria ou carregador!",
-    "Charge Current Override": "Substituição de corrente de carga",
-    "Display Color Preset": "Predefinição de cor",
-    "Basic": "Básico",
-    "Saturated": "Saturado",
-    "Washed": "Desbotado",
-    "Natural": "Natural",
-    "Vivid": "Vívido",
-
-    "CPU Governor Minimum Frequency": "Frequência Mínima do Governador da CPU",
-    " Usage of unsafe display": "O uso de frequências de tela",
-    "refresh rates may cause stress": "taxas de atualização podem causar estresse",
-    "or damage to your display! ": "ou danos ao seu monitor!",
-    "Proceed at your own risk!": "Prossiga por sua conta e risco!",
-    "Max Handheld Display": "Visor portátil máximo",
-    "Max Handheld Display Hz": "Hz máximo em modo portátil",
-    "Display Clock": "Exibir relógio",
-    " Adjust the display voltage": "Ajuste a tensão do display",
-    "with caution to avoid damage": "com cuidado para evitar danos",
-    "to your display panel! ": "ao painel do display!",
-    "Display Voltage": "Tensão do display",
-
-    "Thermal Throttle Limit": "Limite de aceleração térmica",
-    "Official Rating": "Classificação Oficial",
-    "TDP Threshold": "Limite de TDP",
-    "Power": "Potência",
-    "HP Mode": "Modo HP",
-
-    "DVB Shift": "Deslocamento DVB",
-    "SoC Max Volt": "Tensão máxima do SoC",
-    "Step Mode": "Modo passo",
-    "RAM VDD2 Voltage": "Tensão RAM VDD2",
-    "RAM VDDQ Voltage": "Tensão RAM VDDQ",
-    "Voltage": "Tensão",
-    "RAM Frequency Editor": "Editor de frequência RAM",
-    "Ram Max Clock": "Frequência máxima de Ram",
-    "RAM Latency Editor": "Editor de latência de RAM",
-    "RAM Timing Reductions": "Reduções de tempo de RAM",
-    "Memory Timings": "Tempos de memória",
-    "Advanced": "Avançado",
-    "t6 tRTW Fine Tune": "t6 tRTW Ajuste fino",
-    "tRTW Fine Tune": "Ajuste fino tRTW",
-    "t7 tWTR Fine Tune": "t7 tWTR Ajuste fino",
-    "tWTR Fine Tune": "Ajuste fino tWTR",
-    "Memory Latencies": "Latências de memória",
-    "Read Latency": "Latência de leitura",
-    "Write Latency": "Latência de gravação",
-    "High speedo needed!": "Alto valor de Speedo necessário!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (precisa de Speedo/PLL extremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (precisa de Speedo/PLL extremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (precisa de Speedo/PLL extremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (precisa de Speedo/PLL ridículo)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (precisa de Speedo/PLL ridículo)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (precisa de Speedo/PLL ridículo)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "Relógio de aumento da CPU",
-    "CPU UV": "UV da CPU",
-    "CPU Unlock": "Desbloqueio da CPU",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Tensão máxima da CPU",
-    "CPU Max Clock": "Relógio máximo da CPU",
-    "Extreme UV Table": "Mesa UV Extrema",
-    "CPU UV Table": "Tabela UV da CPU",
-    "CPU Low UV": "UV baixo da CPU",
-    "CPU High UV": "CPU alta UV",
-    "CPU Low VMIN": "CPU baixa VMIN",
-    "CPU High VMIN": "VMIN alto da CPU",
-
-    "No Undervolt": "Sem subtensão",
-    "SLT Table": "Tabela SLT",
-    "HiOPT Table": "Tabela HiOPT",
-    "GPU Undervolt Table": "Tabela de subtensão da GPU",
-    "GPU Minimum Voltage": "Tensão mínima da GPU",
-    "Calculate GPU Vmin": "Calcular Vmin da GPU",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Tensão máxima da GPU",
-    "GPU Voltage Offset": "Compensação de tensão da GPU",
-    "GPU DVFS Mode": "Modo GPU DVFS",
-    "GPU DVFS Offset": "Deslocamento DVFS da GPU",
-    "GPU Voltage Table": "Tabela de tensão da GPU",
-    "GPU Custom Table (mV)": "Tabela personalizada de GPU (mV)",
-    "Official Service": "Serviço Oficial",
-    "96.6% limit": "Limite de 96,6%",
-    "99.7% limit": "Limite de 99,7%",
-    " Setting GPU Clocks past": "Definir clocks de GPU além de",
-    "1228MHz without a proper undervolt": "1228MHz sem undervolt adequado",
-    "can cause degradation or damage": "pode causar degradação ou danos",
-    "to your console!": "ao seu console!",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz sem UV, 1152 MHz em SLT",
-    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz em HiOPT pode causar",
-    "permanent damage to your Switch!": "danos permanentes ao seu Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz sem UV e 960 MHz ativado",
-    "SLT or HiOPT can cause ": "SLT ou HiOPT podem causar",
-
-    "Default (Mariko)": "Padrão (Mariko)",
-    "Default (Erista)": "Padrão (Erista)",
-    "Rating": "Avaliação",
-    "Safe Max (Mariko)": "Máximo Seguro (Mariko)",
-    "Safe Max (Erista)": "Seguro Max (Erista)",
-
-    "Voltages": "Tensões",
-    "RAM Voltage:": "Tensão RAM:",
-    "Display Voltage:": "Tensão do display:",
-    "Temperatures": "Temperaturas",
-    "PLLX Temp:": "PLLX Temp:",
-    "AOTAG Temp:": "AOTAG Temp:",
-    "BQ24193 Temp:": "BQ24193 Temp:",
-    "Normal": "Normal",
-    "Warm": "Morno",
-    "Hot": "Quente",
-    "Overheat": "Superaquecimento",
-    "Not Patched": "Não corrigido",
-    "Invalid": "Inválido",
-    "RAM Bandwidth": "Largura de banda RAM",
-    "RAM BW (Peak):": "BW RAM (Pico):",
-    "RAM BW (All):": "BW RAM (Total):",
-    "RAM BW (CPU):": "BW RAM (CPU):",
-    "RAM BW (GPU):": "BW RAM (GPU):",
-    "Hardware Info": "Info de hardware",
-    "Console Type:": "Tipo de console:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "Módulo DRAM: ",
-    "Software Info": "Info de software",
-    "KIP version:": "Versão KIP:",
-    "sys-dock status:": "status do dock do sistema:",
-    "SaltyNX status:": "Status do SaltyNX:",
-    "RR Display status:": "Status de exibição do RR:",
-    "Wafer Position:": "Posição do wafer:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Módulo:",
-    "Board": "Placa",
-    "Display": "Exibição",
-
-    "Developers": "Desenvolvedores",
-    "Contributors": "Colaboradores",
-    "Testers": "Testadores",
-    "Translators": "Tradutores",
-    "Special Thanks": "Agradecimentos especiais",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "Compilando com recursos mínimos",
-    "THE BEER-WARE LICENSE": "A LICENÇA DE CERVEJA"
-}

dist/config/horizon-oc/lang/lang/ru.json

@@ -1,216 +0,0 @@
-{
-    "Information": "Информация",
-    "Unknown": "Неизвестно",
-    "Installed": "Установлено",
-    "Not Installed": "Не установлено",
-    "Default": "По умолчанию",
-    "Do Not Override": "Не менять",
-    "Do not override": "Не менять",
-    "Disabled": "Отключено",
-    "Enabled": "Включено",
-    "Enabled (Default)": "Включено (По умолчанию)",
-    "Enable": "Включено",
-    "Fatal error": "Фатальная ошибка",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к сис-модулю hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все\\n\\n",
-    "correctly installed and enabled.": "правильно установлено и включено.",
-
-    "Edit App Profile": "Профиль приложения",
-    "Edit Global Profile": "Глобальный профиль",
-    "Temporary Overrides": "Временный профиль",
-    "Temporary Overrides ": "Временный профиль",
-    "  Reset": " Сброс",
-    "Settings": "Настройки",
-    "About": "Сведения",
-    "Credits": "Благодарности",
-
-    "Application changed\\n\\n": "Приложение изменено\\n\\n",
-    "The running application changed\\n\\n": "Запущенное приложение изменилось\\n\\n",
-    "while editing was going on.": "пока шло редактирование.",
-
-    "Sleep Mode": "Спящий режим",
-    "Stock": "Стандарт",
-    "Dev OC": "Разгон dev-кита",
-    "Boost Mode": "Режим буста",
-    "Safe Max": "Безопасный макс.",
-    "Unsafe Max": "Опасный макс.",
-    "Absolute Max": "Абсолютный макс.",
-    "Handheld Safe Max": "Портативный безопасный макс.",
-
-    "General Settings": "Основные настройки",
-    "Governor Settings": "Настройки говернора",
-    "Safety Settings": "Настройки безопасности",
-    "Save KIP Settings": "Сохранить настройки KIP",
-    "RAM Settings": "Настройки RAM",
-    "CPU Settings": "Настройки CPU",
-    "GPU Settings": "Настройки GPU",
-    "Display Settings": "Настройки дисплея",
-    "Experimental Settings": "Экспериментальные",
-    "Experimental": "Экспериментальный",
-
-    " Settings marked in blue": "Настройки помеченные синим",
-    "don't require a reboot to apply!": "Синие настройки применяются сразу!",
-    "You can also press  to show": "Нажмите  для просмотра",
-    "information about each setting.": "информацию о каждом параметре.",
-
-    " Experimental Settings are incomplete ": "Экспериментальные настройки не закончены",
-    "and may not work correctly or at all!": "Экспериментальные настройки могут не работать!",
-    "Here be dragons!": "Здесь будут драконы!",
-
-    "RAM Voltage Display Mode": "Показ вольтажа RAM",
-    "RAM Display Unit": "Показ единицы измерения RAM",
-    "Polling Interval": "Интервал опроса",
-
-    "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU",
-    "GPU Scheduling Override": "Перезапись планировщика",
-    "GPU Boot Volt": "Напряжение загрузки GPU",
-    "GPU Boot Voltage": "Напряжение загрузки GPU",
-    "Memory Frequency Measurement Mode": "Режим измерения частоты RAM",
-    " Overriding the charge current": "Перезапись зарядного тока может",
-    "can be dangerous and may cause": "Перезапись зарядного тока может",
-    "damage to your battery or charger!": "повреждить аккумулятор или зарядку!",
-    "Charge Current Override": "Перезапись зарядного тока",
-    "Display Color Preset": "Цветовой пресет",
-    "Basic": "Базовый",
-    "Saturated": "Насыщенный",
-    "Washed": "Бледный",
-    "Natural": "Натуральный",
-    "Vivid": "Яркий",
-
-    "CPU Governor Minimum Frequency": "Минимальная частота говернора CPU",
-    " Usage of unsafe display": "Использование не безопасной",
-    "refresh rates may cause stress": "Не безопасная частота",
-    "or damage to your display! ": "может повредить ваш экран",
-    "Proceed at your own risk!": "Действуйте на свой страх и риск!",
-    "Max Handheld Display": "Макс. дисплей портатива",
-    "Max Handheld Display Hz": "Макс. в портативе",
-    "Display Clock": "Частота экрана",
-    " Adjust the display voltage": "Настройте напряжение экрана",
-    "with caution to avoid damage": "с осторожностью во избежание повреждений",
-    "to your display panel! ": "повреждений экрана!",
-    "Display Voltage": "Напряжение экрана",
-
-    "Thermal Throttle Limit": "Предел троттлинга",
-    "Official Rating": "Официальный рейтинг",
-    "TDP Threshold": "Порог TDP",
-    "Power": "Мощность",
-    "HP Mode": "Режим HP",
-
-    "DVB Shift": "DVB сдвиг",
-    "SoC Max Volt": "Макс. вольт SoC",
-    "Step Mode": "Частотный шаг",
-    "RAM VDD2 Voltage": "Вольтаж VDD2",
-    "RAM VDDQ Voltage": "Вольтаж VDDQ",
-    "Voltage": "Вольтаж",
-    "RAM Frequency Editor": "Редактор частоты",
-    "Ram Max Clock": "Макс. частота",
-    "RAM Latency Editor": "Редактор задержек",
-    "RAM Timing Reductions": "Настройка таймингов",
-    "Memory Timings": "Тайминги RAM",
-    "Advanced": "Расширенные",
-    "t6 tRTW Fine Tune": "Точная настройка t6 tRTW",
-    "tRTW Fine Tune": "Точная настройка tRTW",
-    "t7 tWTR Fine Tune": "Точная настройка t7 tWTR",
-    "tWTR Fine Tune": "Точная настройка tWTR",
-    "Memory Latencies": "Задержки памяти",
-    "Read Latency": "Задержка чтения",
-    "Write Latency": "Задержка записи",
-    "High speedo needed!": "Для высоких speedo",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (нужны невероятные speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (нужны невероятные speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (нужны невероятные speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (нужны безумные speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (нужны безумные speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (нужны безумные speedo/PLL)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "Частота буста",
-    "CPU UV": "Андервольт CPU",
-    "CPU Unlock": "Разблокировка CPU",
-    "CPU VMIN": "Мин. вольтаж",
-    "CPU Max Voltage": "Макс. вольтаж",
-    "CPU Max Clock": "Макс. частота",
-    "Extreme UV Table": "Экстримальная",
-    "CPU UV Table": "Таблица андервольта",
-    "CPU Low UV": "Андервольт нижних частот",
-    "CPU High UV": "Андервольт верхних частот",
-    "CPU Low VMIN": "Мин. вольт. нижних частот",
-    "CPU High VMIN": "Мин. вольт. верхних частот",
-
-    "No Undervolt": "Без андервольта",
-    "SLT Table": "Таблица SLT",
-    "HiOPT Table": "Таблица HiOPT",
-    "GPU Undervolt Table": "Таблица андервольта",
-    "GPU Minimum Voltage": "Мин. вольтаж",
-    "Calculate GPU Vmin": "Вычисление мин. вольтаж",
-    "GPU VMIN": "Мин. вольтаж",
-    "GPU Maximum Voltage": "Макс. вольтаж",
-    "GPU Voltage Offset": "Смещение вольтажа",
-    "GPU DVFS Mode": "Режим DVFS",
-    "GPU DVFS Offset": "Смещение DVFS",
-    "GPU Voltage Table": "Таблица вольтажей",
-    "GPU Custom Table (mV)": "Ручная таблица (мВ)",
-    "Official Service": "Официальная служба",
-    "96.6% limit": "≤96,6%",
-    "99.7% limit": "≤99,7%",
-    " Setting GPU Clocks past": "Установка частот GPU выше",
-    "1228MHz without a proper undervolt": "Установка частот GPU выше 1228 МГц",
-    "can cause degradation or damage": "без хорошего андервольта может",
-    "to your console!": "повредить вашу консоль!",
-    "1075MHz without UV, 1152MHz on SLT": "1075 МГц без UV, 1152 МГц на SLT",
-    "or 1228MHz on HiOPT can cause ": "или 1228 МГц на HiOPT может привести к",
-    "permanent damage to your Switch!": "постоянному повреждению вашей Switch!",
-    "921MHz without UV and 960MHz on": "921 МГц без UV и 960 МГц на",
-    "SLT or HiOPT can cause ": "SLT или HiOPT могут привести к",
-
-    "Default (Mariko)": "По умолчанию (M)",
-    "Default (Erista)": "По умолчанию (E)",
-    "Rating": "Рейтинг",
-    "Safe Max (Mariko)": "Сейф Макс (M)",
-    "Safe Max (Erista)": "Сейф Макс (E)",
-
-    "Voltages": "Напряжения",
-    "RAM Voltage:": "Напряжение RAM:",
-    "Display Voltage:": "Напряжение дисплея:",
-    "Temperatures": "Температуры",
-    "PLLX Temp:": "PLLX Темп.:",
-    "AOTAG Temp:": "AOTAG Темп.:",
-    "BQ24193 Temp:": "BQ24193 Темп.:",
-    "Normal": "Нормальная",
-    "Warm": "Тёплая",
-    "Hot": "Горячая",
-    "Overheat": "Перегрев",
-    "Not Patched": "Не пропатчено",
-    "Invalid": "Недействительно",
-    "RAM Bandwidth": "Пропускная способность RAM",
-    "RAM BW (Peak):": "Полоса RAM (Макс.):",
-    "RAM BW (All):": "Полоса RAM (Всего):",
-    "RAM BW (CPU):": "Полоса RAM (CPU):",
-    "RAM BW (GPU):": "Полоса RAM (GPU):",
-    "Hardware Info": "Информация об оборудовании",
-    "Console Type:": "Тип консоли:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "Модуль DRAM: ",
-    "Software Info": "Информация о программе",
-    "KIP version:": "Версия KIP:",
-    "sys-dock status:": "Статус sys-dock:",
-    "SaltyNX status:": "Статус SaltyNX:",
-    "RR Display status:": "Статус RR Display:",
-    "Wafer Position:": "Wafer Position:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module:",
-    "Board": "Board",
-    "Display": "Дисплей",
-
-    "Developers": "Разработчики",
-    "Contributors": "Внесли вклад",
-    "Testers": "Тестеры",
-    "Translators": "Переводчики",
-    "Special Thanks": "Особая благодарность",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u мВ",
-    "Compiling with minimal features": "Собрано с урезанием функций",
-    "THE BEER-WARE LICENSE": "BEER-WARE LICENSE",
-    "Auto": "Авто"
-}

dist/config/horizon-oc/lang/lang/template.json

@@ -1,214 +0,0 @@
-{
-    "Information": "",
-    "Unknown": "",
-    "Installed": "",
-    "Not Installed": "",
-    "Default": "",
-    "Do Not Override": "",
-    "Do not override": "",
-    "Disabled": "",
-    "Enabled": "",
-    "Enabled (Default)": "",
-    "Enable": "",
-    "Fatal error": "",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "",
-    "Please make sure everything is\\n\\n": "",
-    "correctly installed and enabled.": "",
-
-    "Edit App Profile": "",
-    "Edit Global Profile": "",
-    "Temporary Overrides": "",
-    "Temporary Overrides ": "",
-    "  Reset": "",
-    "Settings": "",
-    "About": "",
-    "Credits": "",
-
-    "Application changed\\n\\n": "",
-    "The running application changed\\n\\n": "",
-    "while editing was going on.": "",
-
-    "Sleep Mode": "",
-    "Stock": "",
-    "Dev OC": "",
-    "Boost Mode": "",
-    "Safe Max": "",
-    "Unsafe Max": "",
-    "Absolute Max": "",
-    "Handheld Safe Max": "",
-
-    "General Settings": "",
-    "Governor Settings": "",
-    "Safety Settings": "",
-    "Save KIP Settings": "",
-    "RAM Settings": "",
-    "CPU Settings": "",
-    "GPU Settings": "",
-    "Display Settings": "",
-    "Experimental Settings": "",
-    "Experimental": "",
-
-    " Settings marked in blue": "",
-    "don't require a reboot to apply!": "",
-    "You can also press  to show": "",
-    "information about each setting.": "",
-
-    " Experimental Settings are incomplete ": "",
-    "and may not work correctly or at all!": "",
-    "Here be dragons!": "",
-
-    "RAM Voltage Display Mode": "",
-    "RAM Display Unit": "",
-    "Polling Interval": "",
-
-    "GPU Scheduling Override Method": "",
-    "GPU Scheduling Override": "",
-    "GPU Boot Volt": "",
-    "GPU Boot Voltage": "",
-    "Memory Frequency Measurement Mode": "",
-    " Overriding the charge current": "",
-    "can be dangerous and may cause": "",
-    "damage to your battery or charger!": "",
-    "Charge Current Override": "",
-    "Display Color Preset": "",
-    "Basic": "",
-    "Saturated": "",
-    "Washed": "",
-    "Natural": "",
-    "Vivid": "",
-
-    "CPU Governor Minimum Frequency": "",
-    " Usage of unsafe display": "",
-    "refresh rates may cause stress": "",
-    "or damage to your display! ": "",
-    "Proceed at your own risk!": "",
-    "Max Handheld Display": "",
-    "Max Handheld Display Hz": "",
-    "Display Clock": "",
-    " Adjust the display voltage": "",
-    "with caution to avoid damage": "",
-    "to your display panel! ": "",
-    "Display Voltage": "",
-
-    "Thermal Throttle Limit": "",
-    "Official Rating": "",
-    "TDP Threshold": "",
-    "Power": "",
-    "HP Mode": "",
-
-    "DVB Shift": "",
-    "SoC Max Volt": "",
-    "Step Mode": "",
-    "RAM VDD2 Voltage": "",
-    "RAM VDDQ Voltage": "",
-    "Voltage": "",
-    "RAM Frequency Editor": "",
-    "Ram Max Clock": "",
-    "RAM Latency Editor": "",
-    "RAM Timing Reductions": "",
-    "Memory Timings": "",
-    "Advanced": "",
-    "t6 tRTW Fine Tune": "",
-    "tRTW Fine Tune": "",
-    "t7 tWTR Fine Tune": "",
-    "tWTR Fine Tune": "",
-    "Memory Latencies": "",
-    "Read Latency": "",
-    "Write Latency": "",
-    "High speedo needed!": "",
-    "3333MHz (Needs extreme Speedo/PLL)": "",
-    "3366MHz (Needs extreme Speedo/PLL)": "",
-    "3400MHz (Needs extreme Speedo/PLL)": "",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "",
-    "JEDEC.": "",
-
-    "CPU Boost Clock": "",
-    "CPU UV": "",
-    "CPU Unlock": "",
-    "CPU VMIN": "",
-    "CPU Max Voltage": "",
-    "CPU Max Clock": "",
-    "Extreme UV Table": "",
-    "CPU UV Table": "",
-    "CPU Low UV": "",
-    "CPU High UV": "",
-    "CPU Low VMIN": "",
-    "CPU High VMIN": "",
-
-    "No Undervolt": "",
-    "SLT Table": "",
-    "HiOPT Table": "",
-    "GPU Undervolt Table": "",
-    "GPU Minimum Voltage": "",
-    "Calculate GPU Vmin": "",
-    "GPU VMIN": "",
-    "GPU Maximum Voltage": "",
-    "GPU Voltage Offset": "",
-    "GPU DVFS Mode": "",
-    "GPU DVFS Offset": "",
-    "GPU Voltage Table": "",
-    "GPU Custom Table (mV)": "",
-    "Official Service": "",
-    "96.6% limit": "",
-    "99.7% limit": "",
-    " Setting GPU Clocks past": "",
-    "1228MHz without a proper undervolt": "",
-    "can cause degradation or damage": "",
-    "to your console!": "",
-    "1075MHz without UV, 1152MHz on SLT": "",
-    "or 1228MHz on HiOPT can cause ": "",
-    "permanent damage to your Switch!": "",
-    "921MHz without UV and 960MHz on": "",
-    "SLT or HiOPT can cause ": "",
-
-    "Default (Mariko)": "",
-    "Default (Erista)": "",
-    "Rating": "",
-    "Safe Max (Mariko)": "",
-    "Safe Max (Erista)": "",
-
-    "Voltages": "",
-    "RAM Voltage:": "",
-    "Display Voltage:": "",
-    "Temperatures": "",
-    "PLLX Temp:": "",
-    "AOTAG Temp:": "",
-    "BQ24193 Temp:": "",
-    "Normal": "",
-    "Warm": "",
-    "Hot": "",
-    "Overheat": "",
-    "Not Patched": "",
-    "Invalid": "",
-    "RAM Bandwidth": "",
-    "RAM BW (Peak):": "",
-    "RAM BW (All):": "",
-    "RAM BW (CPU):": "",
-    "RAM BW (GPU):": "",
-    "Hardware Info": "",
-    "Console Type:": "",
-    "Speedo:": "",
-    "DRAM Module: ": "",
-    "Software Info": "",
-    "KIP version:": "",
-    "sys-dock status:": "",
-    "SaltyNX status:": "",
-    "RR Display status:": "",
-    "Wafer Position:": "",
-    "IDDQ:": "",
-    "Module: ": "",
-    "Board": "",
-    "Display": "",
-
-    "Developers": "",
-    "Contributors": "",
-    "Testers": "",
-    "Translators": "",
-    "Special Thanks": "",
-
-    "X: %u Y: %u": "",
-    "%u.%u%u mV": "",
-    "Compiling with minimal features": "",
-}

dist/config/horizon-oc/lang/lang/uk.json

@@ -1,215 +0,0 @@
-{
-    "Information": "Інформація",
-    "Unknown": "Невідомий",
-    "Installed": "встановлено",
-    "Not Installed": "Не встановлено",
-    "Default": "За замовчуванням",
-    "Do Not Override": "Не перевизначати",
-    "Do not override": "Не перевизначати",
-    "Disabled": "Вимкнено",
-    "Enabled": "Увімкнено",
-    "Enabled (Default)": "Увімкнено (за замовчуванням)",
-    "Enable": "Увімкнути",
-    "Fatal error": "Фатальна помилка",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Не вдалося підключитися до системного модуля hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Переконайтеся, що все\\n\\n",
-    "correctly installed and enabled.": "правильно встановлено та включено.",
-
-    "Edit App Profile": "Редагувати профіль програми",
-    "Edit Global Profile": "Редагувати глобальний профіль",
-    "Temporary Overrides": "Тимчасові перевизначення",
-    "Temporary Overrides ": "Тимчасові перевизначення",
-    "  Reset": " Скидання",
-    "Settings": "Налаштування",
-    "About": "про",
-    "Credits": "Кредити",
-
-    "Application changed\\n\\n": "Додаток змінено\\n\\n",
-    "The running application changed\\n\\n": "Запущена програма змінена\\n\\n",
-    "while editing was going on.": "поки йшло редагування.",
-
-    "Sleep Mode": "Режим сну",
-    "Stock": "Стандарт",
-    "Dev OC": "Розробник OC",
-    "Boost Mode": "Режим посилення",
-    "Safe Max": "Безпечний макс",
-    "Unsafe Max": "Небезпечний макс",
-    "Absolute Max": "Абсолютний макс",
-    "Handheld Safe Max": "Портативний безпечний макс",
-
-    "General Settings": "Загальні налаштування",
-    "Governor Settings": "Налаштування губернатора",
-    "Safety Settings": "Налаштування безпеки",
-    "Save KIP Settings": "Зберегти налаштування KIP",
-    "RAM Settings": "Налаштування оперативної пам'яті",
-    "CPU Settings": "Налаштування ЦП",
-    "GPU Settings": "Налаштування GPU",
-    "Display Settings": "Налаштування дисплея",
-    "Experimental Settings": "Експериментальні налаштування",
-    "Experimental": "Експериментальний",
-
-    " Settings marked in blue": "Налаштування, позначені синім",
-    "don't require a reboot to apply!": "не потребують перезавантаження!",
-    "You can also press  to show": "Також натисніть  для показу",
-    "information about each setting.": "інформацію про кожне налаштування.",
-
-    " Experimental Settings are incomplete ": "Експериментальні налаштування неповні",
-    "and may not work correctly or at all!": "і можуть взагалі не працювати!",
-    "Here be dragons!": "Тут є дракони!",
-
-    "RAM Voltage Display Mode": "Режим відображення напруги RAM",
-    "RAM Display Unit": "Одиниця відображення RAM",
-    "Polling Interval": "Інтервал опитування",
-
-    "GPU Scheduling Override Method": "Метод перевизначення планування GPU",
-    "GPU Scheduling Override": "Перевизначення планування GPU",
-    "GPU Boot Volt": "Напруга завантаження GPU",
-    "GPU Boot Voltage": "Напруга завантаження GPU",
-    "Memory Frequency Measurement Mode": "Режим вимірювання частоти пам'яті",
-    " Overriding the charge current": "Перевизначення струму заряду",
-    "can be dangerous and may cause": "може бути небезпечним і може спричинити",
-    "damage to your battery or charger!": "пошкодження акумулятора або зарядного пристрою!",
-    "Charge Current Override": "Перевизначення струму заряду",
-    "Display Color Preset": "Кольоровий пресет дисплея",
-    "Basic": "Базовий",
-    "Saturated": "Насичений",
-    "Washed": "Блідий",
-    "Natural": "Природний",
-    "Vivid": "Яскравий",
-
-    "CPU Governor Minimum Frequency": "Мінімальна частота регулятора ЦП",
-    " Usage of unsafe display": "Використання небезпечних частот екрана",
-    "refresh rates may cause stress": "частоти оновлення можуть викликати стрес",
-    "or damage to your display! ": "або пошкодження дисплея!",
-    "Proceed at your own risk!": "Продовжуйте на свій страх і ризик!",
-    "Max Handheld Display": "Максимальний портативний дисплей",
-    "Max Handheld Display Hz": "Макс. Гц в портативному режимі",
-    "Display Clock": "Відображення годинника",
-    " Adjust the display voltage": "Налаштуйте напругу дисплея",
-    "with caution to avoid damage": "обережно, щоб уникнути пошкоджень",
-    "to your display panel! ": "до панелі дисплея!",
-    "Display Voltage": "Напруга дисплея",
-
-    "Thermal Throttle Limit": "Термічний дросельний ліміт",
-    "Official Rating": "Офіційний рейтинг",
-    "TDP Threshold": "Поріг TDP",
-    "Power": "потужність",
-    "HP Mode": "Режим HP",
-
-    "DVB Shift": "DVB зсув",
-    "SoC Max Volt": "Макс. напруга SoC",
-    "Step Mode": "Покроковий режим",
-    "RAM VDD2 Voltage": "Напруга RAM VDD2",
-    "RAM VDDQ Voltage": "Напруга RAM VDDQ",
-    "Voltage": "Напруга",
-    "RAM Frequency Editor": "Редактор частоти оперативної пам'яті",
-    "Ram Max Clock": "Годинник Ram Max",
-    "RAM Latency Editor": "Редактор затримки оперативної пам'яті",
-    "RAM Timing Reductions": "Скорочення оперативної пам'яті",
-    "Memory Timings": "Таймінг пам'яті",
-    "Advanced": "Просунутий",
-    "t6 tRTW Fine Tune": "t6 tRTW Точне налаштування",
-    "tRTW Fine Tune": "Точне налаштування tRTW",
-    "t7 tWTR Fine Tune": "t7 tWTR Точне налаштування",
-    "tWTR Fine Tune": "Точна настройка tWTR",
-    "Memory Latencies": "Затримки пам'яті",
-    "Read Latency": "Затримка читання",
-    "Write Latency": "Затримка запису",
-    "High speedo needed!": "Потрібна висока швидкість Speedo!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 МГц (потрібна екстремальна швидкість/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 МГц (потрібна екстремальна швидкість/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 МГц (потрібна екстремальна швидкість/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 МГц (потрібен смішний Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 МГц (потрібен смішний Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 МГц (потрібен смішний Speedo/PLL)",
-    "JEDEC.": "JEDEC.",
-
-    "CPU Boost Clock": "CPU Boost Clock",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "Розблокування ЦП",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Максимальна напруга ЦП",
-    "CPU Max Clock": "Максимальна частота ЦП",
-    "Extreme UV Table": "Екстремальна UV таблиця",
-    "CPU UV Table": "CPU UV Таблиця",
-    "CPU Low UV": "CPU Low UV",
-    "CPU High UV": "CPU High UV",
-    "CPU Low VMIN": "CPU Low VMIN",
-    "CPU High VMIN": "CPU High VMIN",
-
-    "No Undervolt": "Без андервольта",
-    "SLT Table": "Таблиця SLT",
-    "HiOPT Table": "Таблиця HiOPT",
-    "GPU Undervolt Table": "Таблиця зниження напруги GPU",
-    "GPU Minimum Voltage": "Мінімальна напруга GPU",
-    "Calculate GPU Vmin": "Розрахувати GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Максимальна напруга GPU",
-    "GPU Voltage Offset": "Зсув напруги GPU",
-    "GPU DVFS Mode": "Режим GPU DVFS",
-    "GPU DVFS Offset": "GPU DVFS Offset",
-    "GPU Voltage Table": "Таблиця напруги GPU",
-    "GPU Custom Table (mV)": "Спеціальна таблиця GPU (мВ)",
-    "Official Service": "Офіційний сервіс",
-    "96.6% limit": "96,6% обмеження",
-    "99.7% limit": "99,7% обмеження",
-    " Setting GPU Clocks past": "Встановлення тактових частот GPU вище",
-    "1228MHz without a proper undervolt": "1228 МГц без належного підвольту",
-    "can cause degradation or damage": "може спричинити деградацію або пошкодження",
-    "to your console!": "вашій консолі!",
-    "1075MHz without UV, 1152MHz on SLT": "1075 МГц без УФ, 1152 МГц на SLT",
-    "or 1228MHz on HiOPT can cause ": "або 1228 МГц на HiOPT може спричинити",
-    "permanent damage to your Switch!": "незворотне пошкодження вашого Switch!",
-    "921MHz without UV and 960MHz on": "921 МГц без УФ і 960 МГц увімкнено",
-    "SLT or HiOPT can cause ": "SLT або HiOPT можуть спричинити",
-
-    "Default (Mariko)": "За замовчуванням (Маріко)",
-    "Default (Erista)": "За замовчуванням (Erista)",
-    "Rating": "Рейтинг",
-    "Safe Max (Mariko)": "Сейф Макс (Маріко)",
-    "Safe Max (Erista)": "Сейф Макс (Еріста)",
-
-    "Voltages": "Напруги",
-    "RAM Voltage:": "Напруга RAM:",
-    "Display Voltage:": "Напруга дисплея:",
-    "Temperatures": "Температури",
-    "PLLX Temp:": "PLLX Темп.:",
-    "AOTAG Temp:": "AOTAG Темп.:",
-    "BQ24193 Temp:": "BQ24193 Темп.:",
-    "Normal": "Нормально",
-    "Warm": "Тепло",
-    "Hot": "Гаряче",
-    "Overheat": "Перегрів",
-    "Not Patched": "Не виправлено",
-    "Invalid": "Недійсний",
-    "RAM Bandwidth": "Пропускна здатність RAM",
-    "RAM BW (Peak):": "BW RAM (Пік):",
-    "RAM BW (All):": "BW RAM (Усі):",
-    "RAM BW (CPU):": "BW RAM (CPU):",
-    "RAM BW (GPU):": "BW RAM (GPU):",
-    "Hardware Info": "Інфо про апаратне забезпечення",
-    "Console Type:": "Тип консолі:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "Модуль DRAM: ",
-    "Software Info": "Інфо про програмне забезпечення",
-    "KIP version:": "Версія KIP:",
-    "sys-dock status:": "стан sys-dock:",
-    "SaltyNX status:": "Статус SaltyNX:",
-    "RR Display status:": "Статус дисплея RR:",
-    "Wafer Position:": "Позиція пластини:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Модуль:",
-    "Board": "дошка",
-    "Display": "Дисплей",
-
-    "Developers": "Розробники",
-    "Contributors": "Дописувачі",
-    "Testers": "Тестери",
-    "Translators": "Перекладачі",
-    "Special Thanks": "Особлива подяка",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u мВ",
-    "Compiling with minimal features": "Компіляція з мінімальними можливостями",
-    "THE BEER-WARE LICENSE": "ЛІЦЕНЗІЯ НА ПИВНИЙ ПОСУД"
-}

dist/config/horizon-oc/lang/lang/zh-cn.json

@@ -1,215 +0,0 @@
-{
-    "Information": "信息",
-    "Unknown": "未知",
-    "Installed": "已安装",
-    "Not Installed": "未安装",
-    "Default": "默认",
-    "Do Not Override": "不修改",
-    "Do not override": "不修改",
-    "Disabled": "已禁用",
-    "Enabled": "已启用",
-    "Enabled (Default)": "已启用 (默认)",
-    "Enable": "启用",
-    "Fatal error": "致命错误",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接到 hoc-clk 系统模块。\\n\\n",
-    "Please make sure everything is\\n\\n": "请确保所有内容均已\\n\\n",
-    "correctly installed and enabled.": "正确安装并启用。",
-
-    "Edit App Profile": "编辑应用配置",
-    "Edit Global Profile": "编辑全局配置",
-    "Temporary Overrides": "临时配置",
-    "Temporary Overrides ": "临时配置 ",
-    "  Reset": "  重置",
-    "Settings": "设置",
-    "About": "关于",
-    "Credits": "致谢",
-
-    "Application changed\\n\\n": "应用已变更\\n\\n",
-    "The running application changed\\n\\n": "正在运行的应用已变更\\n\\n",
-    "while editing was going on.": "编辑过程中发生变更。",
-
-    "Sleep Mode": "睡眠模式",
-    "Stock": "原厂默认",
-    "Dev OC": "开发者超频",
-    "Boost Mode": "加速模式",
-    "Safe Max": "安全最大值",
-    "Unsafe Max": "危险最大值",
-    "Absolute Max": "绝对最大值",
-    "Handheld Safe Max": "掌机模式安全最大值",
-
-    "General Settings": "通用设置",
-    "Governor Settings": "调频器设置",
-    "Safety Settings": "安全设置",
-    "Save KIP Settings": "保存 KIP 设置",
-    "RAM Settings": "内存设置",
-    "CPU Settings": "CPU 设置",
-    "GPU Settings": "GPU 设置",
-    "Display Settings": "显示设置",
-    "Experimental Settings": "实验性设置",
-    "Experimental": "实验性功能",
-
-    " Settings marked in blue": "蓝色标注的设置",
-    "don't require a reboot to apply!": "无需重启即可应用！",
-    "You can also press  to show": "也可按  查看",
-    "information about each setting.": "每项设置的说明。",
-
-    " Experimental Settings are incomplete ": "实验性设置尚未完成",
-    "and may not work correctly or at all!": "且可能无法正常工作！",
-    "Here be dragons!": "此处有险！",
-
-    "RAM Voltage Display Mode": "内存电压显示模式",
-    "RAM Display Unit": "内存显示单位",
-    "Polling Interval": "刷新间隔",
-
-    "GPU Scheduling Override Method": "GPU 调度覆盖方式",
-    "GPU Scheduling Override": "GPU 调度修改",
-    "GPU Boot Volt": "GPU 启动电压",
-    "GPU Boot Voltage": "GPU 启动电压",
-    "Memory Frequency Measurement Mode": "内存频率测量模式",
-    " Overriding the charge current": "修改充电电流",
-    "can be dangerous and may cause": "存在风险，可能导致",
-    "damage to your battery or charger!": "电池或充电器损坏！",
-    "Charge Current Override": "充电电流修改",
-    "Display Color Preset": "显示颜色预设",
-    "Basic": "基础",
-    "Saturated": "饱和",
-    "Washed": "淡色",
-    "Natural": "自然",
-    "Vivid": "鲜艳",
-
-    "CPU Governor Minimum Frequency": "CPU 调频器最低频率",
-    " Usage of unsafe display": "不安全的显示屏",
-    "refresh rates may cause stress": "刷新率可能会对",
-    "or damage to your display! ": "显示屏造成压力或损坏！ ",
-    "Proceed at your own risk!": "操作风险自负！",
-    "Max Handheld Display": "掌机模式最大显示率",
-    "Max Handheld Display Hz": "掌机最大显示率 Hz",
-    "Display Clock": "显示时钟",
-    " Adjust the display voltage": "调整显示电压",
-    "with caution to avoid damage": "请谨慎以避免损坏",
-    "to your display panel! ": "显示屏面板！",
-    "Display Voltage": "显示电压",
-
-    "Thermal Throttle Limit": "温控设置",
-    "Official Rating": "官方额定值",
-    "TDP Threshold": "TDP 阈值",
-    "Power": "电源",
-    "HP Mode": "高性能模式",
-
-    "DVB Shift": "DVB 偏移",
-    "SoC Max Volt": "SoC 最大电压",
-    "Step Mode": "步进模式",
-    "RAM VDD2 Voltage": "内存 VDD2 电压",
-    "RAM VDDQ Voltage": "内存 VDDQ 电压",
-    "Voltage": "电压",
-    "RAM Frequency Editor": "内存频率编辑器",
-    "Ram Max Clock": "内存最大频率",
-    "RAM Latency Editor": "内存延迟编辑器",
-    "RAM Timing Reductions": "内存时序优化",
-    "Memory Timings": "内存时序",
-    "Advanced": "高级",
-    "t6 tRTW Fine Tune": "t6 tRTW 微调",
-    "tRTW Fine Tune": "tRTW 微调",
-    "t7 tWTR Fine Tune": "t7 tWTR 微调",
-    "tWTR Fine Tune": "tWTR 微调",
-    "Memory Latencies": "内存延迟",
-    "Read Latency": "读取延迟",
-    "Write Latency": "写入延迟",
-    "High speedo needed!": "需要高 Speedo 配置！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极限 Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极限 Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极限 Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极端 Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极端 Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极端 Speedo/PLL)",
-    "JEDEC.": "JEDEC 标准。",
-
-    "CPU Boost Clock": "CPU 超频频率",
-    "CPU UV": "CPU 降压",
-    "CPU Unlock": "CPU 解锁",
-    "CPU VMIN": "CPU 最低电压",
-    "CPU Max Voltage": "CPU 最大电压",
-    "CPU Max Clock": "CPU 最大频率",
-    "Extreme UV Table": "极限降压表",
-    "CPU UV Table": "CPU 降压表",
-    "CPU Low UV": "CPU 低压降压",
-    "CPU High UV": "CPU 高压降压",
-    "CPU Low VMIN": "CPU 低压最低电压",
-    "CPU High VMIN": "CPU 高压最低电压",
-
-    "No Undervolt": "不降压",
-    "SLT Table": "SLT 表",
-    "HiOPT Table": "HiOPT 表",
-    "GPU Undervolt Table": "GPU 降压表",
-    "GPU Minimum Voltage": "GPU 最低电压",
-    "Calculate GPU Vmin": "计算 GPU 最低电压",
-    "GPU VMIN": "GPU 最低电压",
-    "GPU Maximum Voltage": "GPU 最大电压",
-    "GPU Voltage Offset": "GPU 电压偏移",
-    "GPU DVFS Mode": "GPU DVFS 模式",
-    "GPU DVFS Offset": "GPU DVFS 偏移",
-    "GPU Voltage Table": "GPU 电压表",
-    "GPU Custom Table (mV)": "GPU 自定义表 (mV)",
-    "Official Service": "官方服务",
-    "96.6% limit": "96.6% 限制",
-    "99.7% limit": "99.7% 限制",
-    " Setting GPU Clocks past": " 将 GPU 频率设置超过",
-    "1228MHz without a proper undervolt": "没有适当降压的 1228MHz",
-    "can cause degradation or damage": "可能导致损耗或损坏",
-    "to your console!": "您的主机！",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz 无降压，SLT 表下 1152MHz",
-    "or 1228MHz on HiOPT can cause ": "或 HiOPT 表下 1228MHz 可能导致 ",
-    "permanent damage to your Switch!": "Switch 永久损坏！",
-    "921MHz without UV and 960MHz on": "921MHz 无降压，SLT/HiOPT 表下 960MHz",
-    "SLT or HiOPT can cause ": "可能导致 ",
-
-    "Default (Mariko)": "默认 (Mariko)",
-    "Default (Erista)": "默认 (Erista)",
-    "Rating": "额定值",
-    "Safe Max (Mariko)": "安全最大值 (Mariko)",
-    "Safe Max (Erista)": "安全最大值 (Erista)",
-
-    "Voltages": "电压",
-    "RAM Voltage:": "内存电压:",
-    "Display Voltage:": "显示电压:",
-    "Temperatures": "温度",
-    "PLLX Temp:": "PLLX 温度:",
-    "AOTAG Temp:": "AOTAG 温度:",
-    "BQ24193 Temp:": "BQ24193 温度:",
-    "Normal": "正常",
-    "Warm": "温热",
-    "Hot": "过热",
-    "Overheat": "严重过热",
-    "Not Patched": "未修补",
-    "Invalid": "无效",
-    "RAM Bandwidth": "内存带宽",
-    "RAM BW (Peak):": "RAM带宽(峰值):",
-    "RAM BW (All):": "RAM带宽(全部):",
-    "RAM BW (CPU):": "RAM带宽(CPU):",
-    "RAM BW (GPU):": "RAM带宽(GPU):",
-    "Hardware Info": "硬件信息",
-    "Console Type:": "主机类型:",
-    "Speedo:": "Speedo:",
-    "DRAM Module: ": "DRAM 模块: ",
-    "Software Info": "软件信息",
-    "KIP version:": "KIP 版本:",
-    "sys-dock status:": "sys-dock 状态:",
-    "SaltyNX status:": "SaltyNX 状态:",
-    "RR Display status:": "RR 显示状态:",
-    "Wafer Position:": "晶圆位置:",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "模块: ",
-    "Board": "主板",
-    "Display": "显示",
-
-    "Developers": "开发者",
-    "Contributors": "贡献者",
-    "Testers": "测试者",
-    "Translators": "翻译",
-    "Special Thanks": "特别感谢",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "以最小功能编译",
-    "THE BEER-WARE LICENSE": "啤酒软件许可协议"
-}

dist/config/horizon-oc/lang/lang/zh-tw.json

@@ -1,215 +0,0 @@
-{
-    "Information": "資訊",
-    "Unknown": "未知",
-    "Installed": "已安裝",
-    "Not Installed": "未安裝",
-    "Default": "預設",
-    "Do Not Override": "不要覆蓋",
-    "Do not override": "不要覆蓋",
-    "Disabled": "已停用",
-    "Enabled": "已啟用",
-    "Enabled (Default)": "已啟用（預設）",
-    "Enable": "啟用",
-    "Fatal error": "致命錯誤",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "無法連接到 hoc-clk 系統模組。\\n\\n",
-    "Please make sure everything is\\n\\n": "請確保一切正常\\n\\n",
-    "correctly installed and enabled.": "正確安裝並啟用。",
-
-    "Edit App Profile": "編輯應用程式設定檔",
-    "Edit Global Profile": "編輯全域設定檔",
-    "Temporary Overrides": "臨時覆蓋",
-    "Temporary Overrides ": "臨時覆蓋",
-    "  Reset": "  重設",
-    "Settings": "設定",
-    "About": "關於",
-    "Credits": "製作人員",
-
-    "Application changed\\n\\n": "應用程式已更改\\n\\n",
-    "The running application changed\\n\\n": "正在運行的應用程式已更改\\n\\n",
-    "while editing was going on.": "當編輯正在進行時。",
-
-    "Sleep Mode": "睡眠模式",
-    "Stock": "原廠預設",
-    "Dev OC": "開發OC",
-    "Boost Mode": "升壓模式",
-    "Safe Max": "安全最大值",
-    "Unsafe Max": "不安全最大值",
-    "Absolute Max": "絕對最大值",
-    "Handheld Safe Max": "手持式安全最大值",
-
-    "General Settings": "常規設定",
-    "Governor Settings": "調速器設定",
-    "Safety Settings": "安全設定",
-    "Save KIP Settings": "儲存 KIP 設定",
-    "RAM Settings": "記憶體設定",
-    "CPU Settings": "中央處理器設定",
-    "GPU Settings": "GPU設定",
-    "Display Settings": "顯示設定",
-    "Experimental Settings": "實驗性設定",
-    "Experimental": "實驗性的",
-
-    " Settings marked in blue": "藍色標示的設定",
-    "don't require a reboot to apply!": "無需重開機即可套用！",
-    "You can also press  to show": "也可按  顯示",
-    "information about each setting.": "每項設定的說明。",
-
-    " Experimental Settings are incomplete ": "實驗性設定尚未完成",
-    "and may not work correctly or at all!": "且可能無法正常運作！",
-    "Here be dragons!": "此處有危險！",
-
-    "RAM Voltage Display Mode": "RAM電壓顯示模式",
-    "RAM Display Unit": "記憶體顯示單位",
-    "Polling Interval": "輪詢間隔",
-
-    "GPU Scheduling Override Method": "GPU調度覆蓋方法",
-    "GPU Scheduling Override": "GPU 調度覆蓋",
-    "GPU Boot Volt": "GPU 啟動電壓",
-    "GPU Boot Voltage": "GPU 啟動電壓",
-    "Memory Frequency Measurement Mode": "記憶體頻率測量模式",
-    " Overriding the charge current": "覆蓋充電電流",
-    "can be dangerous and may cause": "可能很危險並可能導致",
-    "damage to your battery or charger!": "損壞電池或充電器！",
-    "Charge Current Override": "充電電流覆蓋",
-    "Display Color Preset": "顯示顏色預設",
-    "Basic": "基本",
-    "Saturated": "飽和",
-    "Washed": "淡色",
-    "Natural": "自然",
-    "Vivid": "鮮艷",
-
-    "CPU Governor Minimum Frequency": "CPU調速器最低頻率",
-    " Usage of unsafe display": "不安全的顯示率",
-    "refresh rates may cause stress": "刷新率可能會造成壓力",
-    "or damage to your display! ": "或損壞您的顯示器！",
-    "Proceed at your own risk!": "請自行承擔風險！",
-    "Max Handheld Display": "最大手持顯示器",
-    "Max Handheld Display Hz": "最大手持顯示率 Hz",
-    "Display Clock": "顯示時鐘",
-    " Adjust the display voltage": "調整顯示電壓",
-    "with caution to avoid damage": "請謹慎操作以避免損壞",
-    "to your display panel! ": "顯示面板！",
-    "Display Voltage": "顯示電壓",
-
-    "Thermal Throttle Limit": "熱油門限制",
-    "Official Rating": "官方評級",
-    "TDP Threshold": "TDP閾值",
-    "Power": "電源",
-    "HP Mode": "高效能模式",
-
-    "DVB Shift": "DVB 偏移",
-    "SoC Max Volt": "SoC 最大電壓",
-    "Step Mode": "步進模式",
-    "RAM VDD2 Voltage": "RAM VDD2 電壓",
-    "RAM VDDQ Voltage": "RAM VDDQ 電壓",
-    "Voltage": "電壓",
-    "RAM Frequency Editor": "RAM頻率編輯器",
-    "Ram Max Clock": "記憶體最大時脈",
-    "RAM Latency Editor": "RAM 延遲編輯器",
-    "RAM Timing Reductions": "RAM 時序減少",
-    "Memory Timings": "記憶體時序",
-    "Advanced": "進階",
-    "t6 tRTW Fine Tune": "t6 tRTW 微調",
-    "tRTW Fine Tune": "tRTW 微調",
-    "t7 tWTR Fine Tune": "t7 tWTR 微調",
-    "tWTR Fine Tune": "tWTR 微調",
-    "Memory Latencies": "記憶體延遲",
-    "Read Latency": "讀取延遲",
-    "Write Latency": "寫入延遲",
-    "High speedo needed!": "需要高 Speedo 值！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz（需要極高的 Speedo/PLL）",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz（需要極高的 Speedo/PLL）",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz（需要極高的 Speedo/PLL）",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz（需要荒謬的 Speedo/PLL）",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz（需要荒謬的 Speedo/PLL）",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz（需要荒謬的 Speedo/PLL）",
-    "JEDEC.": "JEDEC。",
-
-    "CPU Boost Clock": "CPU 升壓時脈",
-    "CPU UV": "CPU 降壓",
-    "CPU Unlock": "CPU解鎖",
-    "CPU VMIN": "CPU 最低電壓",
-    "CPU Max Voltage": "CPU最大電壓",
-    "CPU Max Clock": "CPU 最大時脈",
-    "Extreme UV Table": "極限降壓表",
-    "CPU UV Table": "CPU 降壓表",
-    "CPU Low UV": "CPU 低壓降壓",
-    "CPU High UV": "CPU 高壓降壓",
-    "CPU Low VMIN": "CPU 低 VMIN",
-    "CPU High VMIN": "CPU 高 VMIN",
-
-    "No Undervolt": "無欠壓",
-    "SLT Table": "SLT表",
-    "HiOPT Table": "HiOPT表",
-    "GPU Undervolt Table": "GPU 欠壓表",
-    "GPU Minimum Voltage": "GPU最低電壓",
-    "Calculate GPU Vmin": "計算 GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU最大電壓",
-    "GPU Voltage Offset": "GPU電壓偏移",
-    "GPU DVFS Mode": "GPU DVFS 模式",
-    "GPU DVFS Offset": "GPU DVFS 偏移",
-    "GPU Voltage Table": "GPU電壓表",
-    "GPU Custom Table (mV)": "GPU 自訂表 (mV)",
-    "Official Service": "官方服務",
-    "96.6% limit": "96.6%限制",
-    "99.7% limit": "99.7%限制",
-    " Setting GPU Clocks past": "將 GPU 頻率設定超過",
-    "1228MHz without a proper undervolt": "1228MHz 未適當降壓",
-    "can cause degradation or damage": "可能導致劣化或損壞",
-    "to your console!": "您的主機！",
-    "1075MHz without UV, 1152MHz on SLT": "無 UV 時為 1075MHz，SLT 時為 1152MHz",
-    "or 1228MHz on HiOPT can cause ": "或 HiOPT 上的 1228MHz 可能會導致",
-    "permanent damage to your Switch!": "對您的 Switch 造成永久性損壞！",
-    "921MHz without UV and 960MHz on": "無 UV 時為 921MHz，開啟時為 960MHz",
-    "SLT or HiOPT can cause ": "SLT 或 HiOPT 可能會導致",
-
-    "Default (Mariko)": "預設 (Mariko)",
-    "Default (Erista)": "預設 (Erista)",
-    "Rating": "評級",
-    "Safe Max (Mariko)": "安全最大值 (Mariko)",
-    "Safe Max (Erista)": "安全最大值 (Erista)",
-
-    "Voltages": "電壓",
-    "RAM Voltage:": "記憶體電壓：",
-    "Display Voltage:": "顯示電壓：",
-    "Temperatures": "溫度",
-    "PLLX Temp:": "PLLX 溫度：",
-    "AOTAG Temp:": "AOTAG 溫度：",
-    "BQ24193 Temp:": "BQ24193 溫度：",
-    "Normal": "正常",
-    "Warm": "溫熱",
-    "Hot": "過熱",
-    "Overheat": "嚴重過熱",
-    "Not Patched": "未修補",
-    "Invalid": "無效",
-    "RAM Bandwidth": "記憶體頻寬",
-    "RAM BW (Peak):": "RAM頻寬(峰值)：",
-    "RAM BW (All):": "RAM頻寬(全部)：",
-    "RAM BW (CPU):": "RAM頻寬(CPU)：",
-    "RAM BW (GPU):": "RAM頻寬(GPU)：",
-    "Hardware Info": "硬體資訊",
-    "Console Type:": "主機類型：",
-    "Speedo:": "Speedo：",
-    "DRAM Module: ": "DRAM 模組：",
-    "Software Info": "軟體資訊",
-    "KIP version:": "KIP 版本：",
-    "sys-dock status:": "系統塢站狀態：",
-    "SaltyNX status:": "SaltyNX 狀態：",
-    "RR Display status:": "RR 顯示狀態：",
-    "Wafer Position:": "晶圓位置：",
-    "IDDQ:": "IDDQ：",
-    "Module: ": "模組：",
-    "Board": "主板",
-    "Display": "顯示",
-
-    "Developers": "開發商",
-    "Contributors": "貢獻者",
-    "Testers": "測試人員",
-    "Translators": "翻譯",
-    "Special Thanks": "特別感謝",
-
-    "X: %u Y: %u": "X: %u Y: %u",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Compiling with minimal features": "使用最少的功能進行編譯",
-    "THE BEER-WARE LICENSE": "啤酒製品許可證"
-}

dist/config/horizon-oc/lang/nl.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Informatie",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "module:",
-    "sys-dock status:": "sys-dock-status:",
-    "SaltyNX status:": "SaltyNX-status:",
-    "RR Display status:": "RR Weergavestatus:",
-    "Wafer Position:": "Waferpositie:",
-    "Credits": "Kredieten",
-    "Developers": "Ontwikkelaars",
-    "Contributors": "Bijdragers",
-    "Testers": "Testers",
-    "Special Thanks": "Speciale dank",
-    "Unknown": "Onbekend",
-    "Installed": "Geïnstalleerd",
-    "Not Installed": "Niet geïnstalleerd",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "DE LICENTIE VOOR BIERWAREN",
-    "Default": "Standaard",
-    "Do Not Override": "Niet overschrijven",
-    "Disabled": "Uitgeschakeld",
-    "Enabled": "Ingeschakeld",
-    " \\ue0e3 Reset": "\\ue0e3 Opnieuw instellen",
-    "Display": "Weergave",
-    "Application changed\\n\\n": "Applicatie gewijzigd\\n\\n",
-    "The running application changed\\n\\n": "De actieve applicatie is gewijzigd\\n\\n",
-    "while editing was going on.": "terwijl er werd bewerkt.",
-    "Board": "Bord",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Kan geen verbinding maken met hoc-clk sysmodule.\\n\\n",
-    "Please make sure everything is\\n\\n": "Zorg ervoor dat alles in orde is\\n\\n",
-    "correctly installed and enabled.": "correct geïnstalleerd en ingeschakeld.",
-    "Fatal error": "Fatale fout",
-    "Temporary Overrides ": "Tijdelijke overschrijvingen",
-    "Sleep Mode": "Slaapmodus",
-    "Stock": "Voorraad",
-    "Dev OC": "Ontwikkelaar OC",
-    "Boost Mode": "Boost-modus",
-    "Safe Max": "Veilig Max",
-    "Unsafe Max": "OnveiligMax",
-    "Absolute Max": "Absoluut Max",
-    "Handheld Safe Max": "Handkluis Max",
-    "Enable": "Inschakelen",
-    "Edit App Profile": "App-profiel bewerken",
-    "Edit Global Profile": "Globaal profiel bewerken",
-    "Temporary Overrides": "Tijdelijke overschrijvingen",
-    "Settings": "Instellingen",
-    "About": "Over",
-    "Compiling with minimal features": "Compileren met minimale functies",
-    "General Settings": "Algemene instellingen",
-    "Governor Settings": "Gouverneur instellingen",
-    "Safety Settings": "Veiligheidsinstellingen",
-    "Save KIP Settings": "Sla KIP-instellingen op",
-    "RAM Settings": "RAM-instellingen",
-    "CPU Settings": "CPU-instellingen",
-    "GPU Settings": "GPU-instellingen",
-    "Display Settings": "Weergave-instellingen",
-    "Experimental": "Experimenteel",
-    "GPU Scheduling Override Method": "Methode voor het overschrijven van GPU-planning",
-    "can be dangerous and may cause": "kan gevaarlijk zijn en kan veroorzaken",
-    "damage to your battery or charger!": "schade aan uw accu of lader!",
-    "Charge Current Override": "Laadstroom overschrijven",
-    "RAM Voltage Display Mode": "Weergavemodus RAM-spanning",
-    "Polling Interval": "Polling-interval",
-    "CPU Governor Minimum Frequency": "Minimale frequentie CPU-regelaar",
-    "refresh rates may cause stress": "vernieuwingsfrequenties kunnen stress veroorzaken",
-    "or damage to your display! ": "of schade aan uw display!",
-    "Proceed at your own risk!": "Ga verder op eigen risico!",
-    "Max Handheld Display": "Maximaal handheld-display",
-    "Display Clock": "Klok weergeven",
-    "Official Rating": "Officiële beoordeling",
-    "TDP Threshold": "TDP-drempel",
-    "Power": "Macht",
-    "Thermal Throttle Limit": "Thermische gaslimiet",
-    "HP Mode": "HP-modus",
-    "Default (Mariko)": "Standaard (Mariko)",
-    "Default (Erista)": "Standaard (Erista)",
-    "Rating": "Beoordeling",
-    "Safe Max (Mariko)": "Veilig Max (Mariko)",
-    "Safe Max (Erista)": "Veilige Max (Erista)",
-    "RAM VDD2 Voltage": "RAM VDD2-spanning",
-    "Voltage": "Spanning",
-    "RAM VDDQ Voltage": "RAM VDDQ-spanning",
-    "RAM Frequency Editor": "RAM-frequentie-editor",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Hoge snelheid nodig!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (vereist extreme snelheidsmeter/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (vereist extreme snelheidsmeter/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (vereist extreme snelheidsmeter/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (heeft een belachelijke snelheidsmeter/PLL nodig)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (heeft een belachelijke snelheidsmeter/PLL nodig)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (heeft een belachelijke snelheidsmeter/PLL nodig)",
-    "Ram Max Clock": "Ram Max-klok",
-    "RAM Latency Editor": "RAM-latentie-editor",
-    "RAM Timing Reductions": "RAM-timingreducties",
-    "Memory Timings": "Geheugentijden",
-    "Advanced": "Geavanceerd",
-    "t6 tRTW Fine Tune": "t6 tRTW Fijnafstemming",
-    "tRTW Fine Tune": "tRTW Fijnafstemming",
-    "t7 tWTR Fine Tune": "t7 tWTR Fijnafstemming",
-    "tWTR Fine Tune": "tWTR Fijnafstemming",
-    "Memory Latencies": "Geheugenlatenties",
-    "Read Latency": "Lees Latentie",
-    "Write Latency": "Schrijf latentie",
-    "CPU Boost Clock": "CPU-boostklok",
-    "CPU UV": "CPU-UV",
-    "CPU Unlock": "CPU-ontgrendeling",
-    "CPU VMIN": "CPU-VMIN",
-    "CPU Max Voltage": "Maximale CPU-spanning",
-    "CPU Max Clock": "CPU maximale klok",
-    "Extreme UV Table": "Extreme UV-tafel",
-    "CPU UV Table": "CPU UV-tabel",
-    "CPU Low UV": "CPU Lage UV",
-    "CPU High UV": "CPU Hoge UV",
-    "CPU Low VMIN": "CPU Lage VMIN",
-    "CPU High VMIN": "CPU Hoge VMIN",
-    "No Undervolt": "Geen ondervolt",
-    "SLT Table": "SLT-tabel",
-    "HiOPT Table": "HiOPT-tabel",
-    "GPU Undervolt Table": "GPU-undervolttabel",
-    "GPU Minimum Voltage": "GPU-minimale spanning",
-    "Calculate GPU Vmin": "Bereken GPU Vmin",
-    "GPU VMIN": "GPU-VMIN",
-    "GPU Maximum Voltage": "GPU maximale spanning",
-    "GPU Voltage Offset": "GPU-spanningsoffset",
-    "Do not override": "Niet overschrijven",
-    "Enabled (Default)": "Ingeschakeld (standaard)",
-    "96.6% limit": "96,6% limiet",
-    "99.7% limit": "99,7% limiet",
-    "GPU Scheduling Override": "GPU-planning negeren",
-    "Official Service": "Officiële dienst",
-    "GPU DVFS Mode": "GPU DVFS-modus",
-    "GPU DVFS Offset": "GPU DVFS-offset",
-    "GPU Voltage Table": "GPU-spanningstabel",
-    "GPU Custom Table (mV)": "Aangepaste GPU-tabel (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz zonder UV, 1152MHz op SLT",
-    "or 1228MHz on HiOPT can cause ": "of 1228MHz op HiOPT kan dit veroorzaken",
-    "permanent damage to your Switch!": "blijvende schade aan uw Switch!",
-    "921MHz without UV and 960MHz on": "921MHz zonder UV en 960MHz aan",
-    "SLT or HiOPT can cause ": "SLT of HiOPT kunnen dit veroorzaken"
-}

dist/config/horizon-oc/lang/pl.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Informacje",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Moduł:",
-    "sys-dock status:": "stan sys-dock:",
-    "SaltyNX status:": "Stan SaltyNX:",
-    "RR Display status:": "Stan wyświetlacza:",
-    "Wafer Position:": "Pozycja wafla:",
-    "Credits": "Kredyty",
-    "Developers": "Deweloperzy",
-    "Contributors": "Współautorzy",
-    "Testers": "Testery",
-    "Special Thanks": "Specjalne podziękowania",
-    "Unknown": "Nieznany",
-    "Installed": "Zainstalowany",
-    "Not Installed": "Nie zainstalowano",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "LICENCJA NA WYROBY PIWNE",
-    "Default": "Domyślne",
-    "Do Not Override": "Nie zastępuj",
-    "Disabled": "Niepełnosprawny",
-    "Enabled": "Włączone",
-    " \\ue0e3 Reset": "\\ue0e3 Zresetuj",
-    "Display": "Wyświetlacz",
-    "Application changed\\n\\n": "Aplikacja została zmieniona\\n\\n",
-    "The running application changed\\n\\n": "Działająca aplikacja została zmieniona\\n\\n",
-    "while editing was going on.": "podczas gdy edycja była w toku.",
-    "Board": "Deska",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Nie można połączyć się z modułem sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Upewnij się, że wszystko jest\\n\\n",
-    "correctly installed and enabled.": "poprawnie zainstalowany i włączony.",
-    "Fatal error": "Fatalny błąd",
-    "Temporary Overrides ": "Tymczasowe nadpisania",
-    "Sleep Mode": "Tryb uśpienia",
-    "Stock": "Zapas",
-    "Dev OC": "Dev OC",
-    "Boost Mode": "Tryb wzmocnienia",
-    "Safe Max": "Bezpieczny maks",
-    "Unsafe Max": "Niebezpieczny maks",
-    "Absolute Max": "Absolutny maks",
-    "Handheld Safe Max": "Sejf ręczny Max",
-    "Enable": "Włącz",
-    "Edit App Profile": "Edytuj profil aplikacji",
-    "Edit Global Profile": "Edytuj profil globalny",
-    "Temporary Overrides": "Tymczasowe nadpisania",
-    "Settings": "Ustawienia",
-    "About": "O",
-    "Compiling with minimal features": "Kompilacja z minimalnymi funkcjami",
-    "General Settings": "Ustawienia ogólne",
-    "Governor Settings": "Ustawienia gubernatora",
-    "Safety Settings": "Ustawienia bezpieczeństwa",
-    "Save KIP Settings": "Zapisz ustawienia KIP",
-    "RAM Settings": "Ustawienia pamięci RAM",
-    "CPU Settings": "Ustawienia procesora",
-    "GPU Settings": "Ustawienia GPU",
-    "Display Settings": "Ustawienia wyświetlania",
-    "Experimental": "Eksperymentalny",
-    "GPU Scheduling Override Method": "Metoda obejścia harmonogramu GPU",
-    "can be dangerous and may cause": "może być niebezpieczne i powodować",
-    "damage to your battery or charger!": "uszkodzenie akumulatora lub ładowarki!",
-    "Charge Current Override": "Obejście prądu ładowania",
-    "RAM Voltage Display Mode": "Tryb wyświetlania napięcia RAM",
-    "Polling Interval": "Interwał odpytywania",
-    "CPU Governor Minimum Frequency": "Minimalna częstotliwość regulatora procesora",
-    "refresh rates may cause stress": "częstotliwości odświeżania mogą powodować stres",
-    "or damage to your display! ": "lub uszkodzenie wyświetlacza!",
-    "Proceed at your own risk!": "Postępuj na własne ryzyko!",
-    "Max Handheld Display": "Maksymalny wyświetlacz ręczny",
-    "Display Clock": "Wyświetl zegar",
-    "Official Rating": "Oficjalna ocena",
-    "TDP Threshold": "Próg TDP",
-    "Power": "Moc",
-    "Thermal Throttle Limit": "Limit przepustnicy termicznej",
-    "HP Mode": "Tryb HP",
-    "Default (Mariko)": "Domyślny (Mariko)",
-    "Default (Erista)": "Domyślny (Erista)",
-    "Rating": "Ocena",
-    "Safe Max (Mariko)": "Bezpieczny Max (Mariko)",
-    "Safe Max (Erista)": "Bezpieczny Max (Erista)",
-    "RAM VDD2 Voltage": "Napięcie pamięci RAM VDD2",
-    "Voltage": "Napięcie",
-    "RAM VDDQ Voltage": "Napięcie RAM VDDQ",
-    "RAM Frequency Editor": "Edytor częstotliwości RAM",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Potrzebna duża prędkość!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "Ram Max Clock": "Zegar Ram Max",
-    "RAM Latency Editor": "Edytor opóźnień pamięci RAM",
-    "RAM Timing Reductions": "Zmniejszenie taktowania pamięci RAM",
-    "Memory Timings": "Taktowanie pamięci",
-    "Advanced": "Zaawansowane",
-    "t6 tRTW Fine Tune": "t6 tRTW Dostrój",
-    "tRTW Fine Tune": "tRTW Dostosuj",
-    "t7 tWTR Fine Tune": "t7 tWTR Dostosuj",
-    "tWTR Fine Tune": "tWTR Dostosuj",
-    "Memory Latencies": "Opóźnienia pamięci",
-    "Read Latency": "Przeczytaj Opóźnienie",
-    "Write Latency": "Opóźnienie zapisu",
-    "CPU Boost Clock": "Zegar wzmocnienia procesora",
-    "CPU UV": "Procesor UV",
-    "CPU Unlock": "Odblokowanie procesora",
-    "CPU VMIN": "Procesor VMIN",
-    "CPU Max Voltage": "Maksymalne napięcie procesora",
-    "CPU Max Clock": "Maks. zegar procesora",
-    "Extreme UV Table": "Ekstremalny stół UV",
-    "CPU UV Table": "Tabela UV procesora",
-    "CPU Low UV": "Niskie promieniowanie UV procesora",
-    "CPU High UV": "Wysokie promieniowanie UV procesora",
-    "CPU Low VMIN": "Niski poziom VMIN procesora",
-    "CPU High VMIN": "Wysoki poziom VMIN procesora",
-    "No Undervolt": "Brak Undervolta",
-    "SLT Table": "Stół SLT",
-    "HiOPT Table": "Stół HiOPT",
-    "GPU Undervolt Table": "Tabela niedoboru napięcia GPU",
-    "GPU Minimum Voltage": "Minimalne napięcie procesora graficznego",
-    "Calculate GPU Vmin": "Oblicz Vmin GPU",
-    "GPU VMIN": "VMIN GPU",
-    "GPU Maximum Voltage": "Maksymalne napięcie procesora graficznego",
-    "GPU Voltage Offset": "Przesunięcie napięcia GPU",
-    "Do not override": "Nie zastępuj",
-    "Enabled (Default)": "Włączone (domyślnie)",
-    "96.6% limit": "Limit 96,6%.",
-    "99.7% limit": "Limit 99,7%.",
-    "GPU Scheduling Override": "Zastąpienie harmonogramu GPU",
-    "Official Service": "Oficjalny serwis",
-    "GPU DVFS Mode": "Tryb DVFS procesora graficznego",
-    "GPU DVFS Offset": "Przesunięcie DVFS GPU",
-    "GPU Voltage Table": "Tabela napięć GPU",
-    "GPU Custom Table (mV)": "Tabela niestandardowa GPU (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz bez UV, 1152 MHz na SLT",
-    "or 1228MHz on HiOPT can cause ": "lub 1228 MHz na HiOPT może powodować",
-    "permanent damage to your Switch!": "trwałe uszkodzenie Switcha!",
-    "921MHz without UV and 960MHz on": "921 MHz bez UV i 960 MHz włączone",
-    "SLT or HiOPT can cause ": "Przyczyną mogą być SLT lub HiOPT"
-}

dist/config/horizon-oc/lang/pt.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Informação",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Módulo:",
-    "sys-dock status:": "status do dock do sistema:",
-    "SaltyNX status:": "Status do SaltyNX:",
-    "RR Display status:": "Status de exibição do RR:",
-    "Wafer Position:": "Posição da bolacha:",
-    "Credits": "Créditos",
-    "Developers": "Desenvolvedores",
-    "Contributors": "Colaboradores",
-    "Testers": "Testadores",
-    "Special Thanks": "Agradecimentos especiais",
-    "Unknown": "Desconhecido",
-    "Installed": "Instalado",
-    "Not Installed": "Não instalado",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "A LICENÇA DE CERVEJA",
-    "Default": "Padrão",
-    "Do Not Override": "Não substituir",
-    "Disabled": "Desativado",
-    "Enabled": "Habilitado",
-    " \\ue0e3 Reset": "\\ue0e3 Redefinir",
-    "Display": "Exibição",
-    "Application changed\\n\\n": "Aplicativo alterado\\n\\n",
-    "The running application changed\\n\\n": "O aplicativo em execução foi alterado\\n\\n",
-    "while editing was going on.": "enquanto a edição estava acontecendo.",
-    "Board": "Conselho",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Não foi possível conectar-se ao sysmodule hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Verifique se tudo está\\n\\n",
-    "correctly installed and enabled.": "corretamente instalado e ativado.",
-    "Fatal error": "Erro fatal",
-    "Temporary Overrides ": "Substituições temporárias",
-    "Sleep Mode": "Modo de suspensão",
-    "Stock": "Estoque",
-    "Dev OC": "Desenvolvedor OC",
-    "Boost Mode": "Modo de reforço",
-    "Safe Max": "Máx. Seguro",
-    "Unsafe Max": "Máximo inseguro",
-    "Absolute Max": "Máximo absoluto",
-    "Handheld Safe Max": "Portátil Seguro Máx.",
-    "Enable": "Habilitar",
-    "Edit App Profile": "Editar perfil do aplicativo",
-    "Edit Global Profile": "Editar perfil global",
-    "Temporary Overrides": "Substituições temporárias",
-    "Settings": "Configurações",
-    "About": "Sobre",
-    "Compiling with minimal features": "Compilando com recursos mínimos",
-    "General Settings": "Configurações Gerais",
-    "Governor Settings": "Configurações do Governador",
-    "Safety Settings": "Configurações de segurança",
-    "Save KIP Settings": "Salvar configurações KIP",
-    "RAM Settings": "Configurações de RAM",
-    "CPU Settings": "Configurações de CPU",
-    "GPU Settings": "Configurações de GPU",
-    "Display Settings": "Configurações de exibição",
-    "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "Método de substituição de agendamento de GPU",
-    "can be dangerous and may cause": "pode ser perigoso e causar",
-    "damage to your battery or charger!": "danos à sua bateria ou carregador!",
-    "Charge Current Override": "Substituição de corrente de carga",
-    "RAM Voltage Display Mode": "Modo de exibição de tensão RAM",
-    "Polling Interval": "Intervalo de votação",
-    "CPU Governor Minimum Frequency": "Frequência Mínima do Governador da CPU",
-    "refresh rates may cause stress": "taxas de atualização podem causar estresse",
-    "or damage to your display! ": "ou danos ao seu monitor!",
-    "Proceed at your own risk!": "Prossiga por sua conta e risco!",
-    "Max Handheld Display": "Visor portátil máximo",
-    "Display Clock": "Exibir relógio",
-    "Official Rating": "Classificação Oficial",
-    "TDP Threshold": "Limite de TDP",
-    "Power": "Poder",
-    "Thermal Throttle Limit": "Limite de aceleração térmica",
-    "HP Mode": "Modo HP",
-    "Default (Mariko)": "Padrão (Mariko)",
-    "Default (Erista)": "Padrão (Erista)",
-    "Rating": "Avaliação",
-    "Safe Max (Mariko)": "Máximo Seguro (Mariko)",
-    "Safe Max (Erista)": "Seguro Max (Erista)",
-    "RAM VDD2 Voltage": "Tensão RAM VDD2",
-    "Voltage": "Tensão",
-    "RAM VDDQ Voltage": "Tensão RAM VDDQ",
-    "RAM Frequency Editor": "Editor de frequência RAM",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Alta velocidade necessária!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (precisa de Speedo/PLL extremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (precisa de Speedo/PLL extremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (precisa de Speedo/PLL extremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (precisa de Speedo/PLL ridículo)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (precisa de Speedo/PLL ridículo)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (precisa de Speedo/PLL ridículo)",
-    "Ram Max Clock": "Relógio máximo de Ram",
-    "RAM Latency Editor": "Editor de latência de RAM",
-    "RAM Timing Reductions": "Reduções de tempo de RAM",
-    "Memory Timings": "Tempos de memória",
-    "Advanced": "Avançado",
-    "t6 tRTW Fine Tune": "t6 tRTW Ajuste fino",
-    "tRTW Fine Tune": "Ajuste fino tRTW",
-    "t7 tWTR Fine Tune": "t7 tWTR Ajuste fino",
-    "tWTR Fine Tune": "Ajuste fino tWTR",
-    "Memory Latencies": "Latências de memória",
-    "Read Latency": "Latência de leitura",
-    "Write Latency": "Latência de gravação",
-    "CPU Boost Clock": "Relógio de aumento da CPU",
-    "CPU UV": "UV da CPU",
-    "CPU Unlock": "Desbloqueio da CPU",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Tensão máxima da CPU",
-    "CPU Max Clock": "Relógio máximo da CPU",
-    "Extreme UV Table": "Mesa UV Extrema",
-    "CPU UV Table": "Tabela UV da CPU",
-    "CPU Low UV": "UV baixo da CPU",
-    "CPU High UV": "CPU alta UV",
-    "CPU Low VMIN": "CPU baixa VMIN",
-    "CPU High VMIN": "VMIN alto da CPU",
-    "No Undervolt": "Sem subtensão",
-    "SLT Table": "Tabela SLT",
-    "HiOPT Table": "Tabela HiOPT",
-    "GPU Undervolt Table": "Tabela de subtensão da GPU",
-    "GPU Minimum Voltage": "Tensão mínima da GPU",
-    "Calculate GPU Vmin": "Calcular Vmin da GPU",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Tensão máxima da GPU",
-    "GPU Voltage Offset": "Compensação de tensão da GPU",
-    "Do not override": "Não substitua",
-    "Enabled (Default)": "Habilitado (padrão)",
-    "96.6% limit": "Limite de 96,6%",
-    "99.7% limit": "Limite de 99,7%",
-    "GPU Scheduling Override": "Substituição de agendamento de GPU",
-    "Official Service": "Serviço Oficial",
-    "GPU DVFS Mode": "Modo GPU DVFS",
-    "GPU DVFS Offset": "Deslocamento DVFS da GPU",
-    "GPU Voltage Table": "Tabela de tensão da GPU",
-    "GPU Custom Table (mV)": "Tabela personalizada de GPU (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz sem UV, 1152 MHz em SLT",
-    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz em HiOPT pode causar",
-    "permanent damage to your Switch!": "danos permanentes ao seu Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz sem UV e 960 MHz ativado",
-    "SLT or HiOPT can cause ": "SLT ou HiOPT podem causar"
-}

dist/config/horizon-oc/lang/ru.json

@@ -1,179 +0,0 @@
-{
-    "Information": "Информация",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module:",
-    "sys-dock status:": "Статус sys-dock:",
-    "SaltyNX status:": "Статус SaltyNX:",
-    "RR Display status:": "Статус RR Display:",
-    "Wafer Position:": "Wafer Position:",
-    "Credits": "Благодарности",
-    "Developers": "Разработчики",
-    "Contributors": "Внесли вклад",
-    "Testers": "Тестеры",
-    "Special Thanks": "Особая благодарность",
-    "Unknown": "Неизвестно",
-    "Installed": "Установлено",
-    "Not Installed": "Не установлено",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "BEER-WARE LICENSE",
-    "Default": "По умолчанию",
-    "Do Not Override": "Не менять",
-    "Disabled": "Отключено",
-    "Enabled": "Включено",
-    "Auto": "Авто",
-    " \\ue0e3 Reset": "\\ue0e3 Сброс",
-    "Display": "Дисплей",
-    "Application changed\\n\\n": "Приложение изменено\\n\\n",
-    "The running application changed\\n\\n": "Запущенное приложение изменилось\\n\\n",
-    "while editing was going on.": "пока шло редактирование.",
-    "Board": "Board",
-    "%u.%u%u mV": "%u.%u%u мВ",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к сис-модулю hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все\\n\\n",
-    "correctly installed and enabled.": "правильно установлено и включено.",
-    "Fatal error": "Фатальная ошибка",
-    "Temporary Overrides ": "Временный профиль",
-    "Sleep Mode": "Спящий режим",
-    "Stock": "Стандарт",
-    "Dev OC": "Разгон dev-кита",
-    "Boost Mode": "Режим буста",
-    "Safe Max": "Безопасный макс.",
-    "Unsafe Max": "Опасный макс.",
-    "Absolute Max": "Абсолютный макс.",
-    "Handheld Safe Max": "Портативный безопасный макс.",
-    "Enable": "Включено",
-    "Edit App Profile": "Профиль приложения",
-    "Edit Global Profile": "Глобальный профиль",
-    "Temporary Overrides": "Временный профиль",
-    "Settings": "Настройки",
-    "About": "Сведения",
-    "Compiling with minimal features": "Собрано с урезанием функций",
-    "\uE150 Settings marked in blue": "Настройки помеченные синим",
-    "don't require a reboot to apply!": "Синие настройки применяются сразу!",
-    "General Settings": "Основные настройки",
-    "Governor Settings": "Настройки говернора",
-    "Safety Settings": "Настройки безопасности",
-    "Save KIP Settings": "Сохранить настройки KIP",
-    "RAM Settings": "Настройки RAM",
-    "CPU Settings": "Настройки CPU",
-    "GPU Settings": "Настройки GPU",
-    "Display Settings": "Настройки дисплея",
-    "Experimental": "Экспериментальный",
-    "Enable Experimental Settings": "Экспериментальные настройки",
-    "\uE150 Experimental Settings are incomplete ": "Экспериментальные настройки не закончены",
-    "and may not work correctly or at all!": "Экспериментальные настройки не",
-    "Here be dragons!": "закончены и могут не работать!",
-    "Experimental Settings": "Экспериментальные",
-    "Live CPU Undervolt": "Мгновенный андервольт CPU",
-    "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU",
-    "Memory Frequency Measurement Mode": "Режим измерения частоты RAM",
-    "\uE150 Overriding the charge current": "Перезапись зарядного тока может",
-    "can be dangerous and may cause": "Перезапись зарядного тока может",
-    "damage to your battery or charger!": "повреждить аккумулятор или зарядку!",
-    "Charge Current Override": "Перезапись зарядного тока",
-    "RAM Voltage Display Mode": "Показ вольтажа RAM",
-    "RAM Display Unit": "Показ единицы измерения RAM",
-    "Polling Interval": "Интервал опроса",
-    "CPU Governor Minimum Frequency": "Минимальная частота говернора CPU",
-    "\uE150 Usage of unsafe display": "\uE150 Использование не безопасной",
-    "refresh rates may cause stress": "Не безопасная частота",
-    "or damage to your display! ": "может повредить ваш экран",
-    "Proceed at your own risk!": "Действуйте на свой страх и риск!",
-    "Max Handheld Display Hz": "Макс. в портативе",
-    "Display Clock": "Частота экрана",
-    "Official Rating": "Официальный рейтинг",
-    "TDP Threshold": "Порог TDP",
-    "Power": "Мощность",
-    "Thermal Throttle Limit": "Предел троттлинга",
-    "HP Mode": "Режим HP",
-    "Default (Mariko)": "По умолчанию (M)",
-    "Default (Erista)": "По умолчанию (E)",
-    "Rating": "Рейтинг",
-    "Safe Max (Mariko)": "Сейф Макс (M)",
-    "Safe Max (Erista)": "Сейф Макс (E)",
-    "RAM VDD2 Voltage": "Вольтаж VDD2",
-    "Voltage": "Вольтаж",
-    "RAM VDDQ Voltage": "Вольтаж VDDQ",
-    "Step Mode": "Частотный шаг",
-    "RAM Frequency Editor": "Редактор частоты",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Для высоких speedo",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (нужны невероятные speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (нужны невероятные speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (нужны невероятные speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (нужны безумные speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (нужны безумные speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (нужны безумные speedo/PLL)",
-    "Ram Max Clock": "Макс. частота",
-    "RAM Latency Editor": "Редактор задержек",
-    "1333 Latency Max": "1333 задержка",
-    "1600 Latency Max": "1600 задержка",
-    "1866 Latency Max": "1866 задержка",
-    "2133 Latency Max": "2133 задержка",
-    "RAM Timing Reductions": "Настройка таймингов",
-    "Memory Timings": "Тайминги RAM",
-    "RAM-Timing tBreak": "Разбитие таблицы таймингов",
-    "Memory": "RAM",
-    "mem": "RAM",
-    "MEM": "RAM",
-    "Profile": "Профиль",
-    "Governor": "Говернор",
-    "Advanced": "Расширенные",
-    "Docked": "В доке",
-    "Handheld": "Портатив",
-    "Charging": "На зарядке",
-    "USB Charger": "USB Зарядка",
-    "PD Charger": "PD Зарядка", 
-    "Handheld TDP": "TPD в портативе",
-    "Thermal Throttle": "Троттлинг",
-    "Uncapped Clocks": "Максимальные частоты",
-    "SoC DVB Shift": "SoC DVB сдвиг",
-    "SoC Max Volt": "Макс. вольт SoC",
-    "Overwrite Boost Mode": "Перезапись буста",
-    "Display Refresh Rate Changing": "Изменение частоты экрана",
-    "Low t6 tRTW": "Нижний t6 tRTW",
-    "Low t7 tWTR": "Нижний t7 tWTR",
-    "1333WL t2 RP Cap": "Предел 1333WL t2 RP",
-    "t6 tRTW Fine Tune": " Точная настройка t6 tRTW",
-    "tRTW Fine Tune": " Точная настройка tRTW",
-    "t7 tWTR Fine Tune": " Точная настройка t7 tWTR",
-    "tWTR Fine Tune": " Точная настройка tWTR",
-    "Memory Latencies": "Задержки памяти",
-    "Read Latency": "Задержка чтения",
-    "Write Latency": "Задержка записи",
-    "CPU Boost Clock": "Частота буста",
-    "CPU UV": "Андервольт CPU",
-    "CPU Unlock": "Разблокировка CPU",
-    "CPU VMIN": "Мин. вольтаж",
-    "CPU Max Voltage": "Макс. вольтаж",
-    "CPU Max Clock": "Макс. частота",
-    "Extreme UV Table": "Экстримальная",
-    "CPU UV Table": "Таблица андервольта",
-    "CPU Low UV": "Андервольт нижних частот",
-    "CPU High UV": "Андервольт верхних частот",
-    "CPU Low VMIN": "Мин. вольт. нижних частот",
-    "CPU High VMIN": "Мин. вольт. верхних частот",
-    "No Undervolt": "Без андервольта",
-    "SLT Table": "Таблица SLT",
-    "HiOPT Table": "Таблица HiOPT",
-    "GPU Undervolt Table": "Таблица андервольта",
-    "GPU Minimum Voltage": "Мин. вольтаж",
-    "Calculate GPU Vmin": "Вычисление мин. вольтаж",
-    "GPU VMIN": "Мин. вольтаж",
-    "GPU Maximum Voltage": "Макс. вольтаж",
-    "GPU Voltage Offset": "Смещение вольтажа",
-    "Do not override": "Не менять",
-    "Enabled (Default)": "Включено (По умолчанию)",
-    "96.6% limit": "≤96,6%",
-    "99.7% limit": "≤99,7%",
-    "GPU Scheduling Override": "Перезапись планировщика",
-    "Official Service": "Официальная служба",
-    "GPU DVFS Mode": "Режим DVFS",
-    "GPU DVFS Offset": "Смещение DVFS",
-    "GPU Voltage Table": "Таблица вольтажей",
-    "GPU Custom Table (mV)": "Ручная таблица (мВ)",
-    "\uE150 Setting GPU Clocks past": "\uE150 Установка частот GPU выше",
-	"1228MHz without a proper undervolt": "Установка частот GPU выше 1228 МГц",
-    "can cause degradation or damage": "без хорошего андервольта может",
-    "to your console!": "повредить вашу консоль!"
-}

dist/config/horizon-oc/lang/uk.json

@@ -1,141 +0,0 @@
-{
-    "Information": "Інформація",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Модуль:",
-    "sys-dock status:": "стан sys-dock:",
-    "SaltyNX status:": "Статус SaltyNX:",
-    "RR Display status:": "Статус дисплея RR:",
-    "Wafer Position:": "Позиція пластини:",
-    "Credits": "Кредити",
-    "Developers": "Розробники",
-    "Contributors": "Дописувачі",
-    "Testers": "Тестери",
-    "Special Thanks": "Особлива подяка",
-    "Unknown": "Невідомий",
-    "Installed": "встановлено",
-    "Not Installed": "Не встановлено",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "ЛІЦЕНЗІЯ НА ПИВНИЙ ПОСУД",
-    "Default": "За замовчуванням",
-    "Do Not Override": "Не перевизначати",
-    "Disabled": "Вимкнено",
-    "Enabled": "Увімкнено",
-    " \\ue0e3 Reset": "\\ue0e3 Скидання",
-    "Display": "Дисплей",
-    "Application changed\\n\\n": "Додаток змінено\\n\\n",
-    "The running application changed\\n\\n": "Запущена програма змінена\\n\\n",
-    "while editing was going on.": "поки йшло редагування.",
-    "Board": "дошка",
-    "%u.%u%u mV": "%u.%u%u мВ",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Не вдалося підключитися до системного модуля hoc-clk.\\n\\n",
-    "Please make sure everything is\\n\\n": "Переконайтеся, що все\\n\\n",
-    "correctly installed and enabled.": "правильно встановлено та включено.",
-    "Fatal error": "Фатальна помилка",
-    "Temporary Overrides ": "Тимчасові перевизначення",
-    "Sleep Mode": "Режим сну",
-    "Stock": "Запас",
-    "Dev OC": "Розробник OC",
-    "Boost Mode": "Режим посилення",
-    "Safe Max": "Безпечний макс",
-    "Unsafe Max": "Небезпечний макс",
-    "Absolute Max": "Абсолютний макс",
-    "Handheld Safe Max": "Портативний сейф Макс",
-    "Enable": "Увімкнути",
-    "Edit App Profile": "Редагувати профіль програми",
-    "Edit Global Profile": "Редагувати глобальний профіль",
-    "Temporary Overrides": "Тимчасові перевизначення",
-    "Settings": "Налаштування",
-    "About": "про",
-    "Compiling with minimal features": "Компіляція з мінімальними можливостями",
-    "General Settings": "Загальні налаштування",
-    "Governor Settings": "Налаштування губернатора",
-    "Safety Settings": "Налаштування безпеки",
-    "Save KIP Settings": "Зберегти налаштування KIP",
-    "RAM Settings": "Налаштування оперативної пам'яті",
-    "CPU Settings": "Налаштування ЦП",
-    "GPU Settings": "Налаштування GPU",
-    "Display Settings": "Налаштування дисплея",
-    "Experimental": "Експериментальний",
-    "GPU Scheduling Override Method": "Метод перевизначення планування GPU",
-    "can be dangerous and may cause": "може бути небезпечним і може спричинити",
-    "damage to your battery or charger!": "пошкодження акумулятора або зарядного пристрою!",
-    "Charge Current Override": "Перевизначення струму заряду",
-    "RAM Voltage Display Mode": "Режим відображення напруги RAM",
-    "Polling Interval": "Інтервал опитування",
-    "CPU Governor Minimum Frequency": "Мінімальна частота регулятора ЦП",
-    "refresh rates may cause stress": "частоти оновлення можуть викликати стрес",
-    "or damage to your display! ": "або пошкодження дисплея!",
-    "Proceed at your own risk!": "Продовжуйте на свій страх і ризик!",
-    "Max Handheld Display": "Максимальний портативний дисплей",
-    "Display Clock": "Відображення годинника",
-    "Official Rating": "Офіційний рейтинг",
-    "TDP Threshold": "Поріг TDP",
-    "Power": "потужність",
-    "Thermal Throttle Limit": "Термічний дросельний ліміт",
-    "HP Mode": "Режим HP",
-    "Default (Mariko)": "За замовчуванням (Маріко)",
-    "Default (Erista)": "За замовчуванням (Erista)",
-    "Rating": "Рейтинг",
-    "Safe Max (Mariko)": "Сейф Макс (Маріко)",
-    "Safe Max (Erista)": "Сейф Макс (Еріста)",
-    "RAM VDD2 Voltage": "Напруга RAM VDD2",
-    "Voltage": "Напруга",
-    "RAM VDDQ Voltage": "Напруга RAM VDDQ",
-    "RAM Frequency Editor": "Редактор частоти оперативної пам'яті",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Потрібна висока швидкість!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 МГц (потрібна екстремальна швидкість/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 МГц (потрібна екстремальна швидкість/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 МГц (потрібна екстремальна швидкість/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 МГц (потрібен смішний Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 МГц (потрібен смішний Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 МГц (потрібен смішний Speedo/PLL)",
-    "Ram Max Clock": "Годинник Ram Max",
-    "RAM Latency Editor": "Редактор затримки оперативної пам'яті",
-    "RAM Timing Reductions": "Скорочення оперативної пам'яті",
-    "Memory Timings": "Таймінг пам'яті",
-    "Advanced": "Просунутий",
-    "t6 tRTW Fine Tune": "t6 tRTW Точне налаштування",
-    "tRTW Fine Tune": "Точне налаштування tRTW",
-    "t7 tWTR Fine Tune": "t7 tWTR Точне налаштування",
-    "tWTR Fine Tune": "Точна настройка tWTR",
-    "Memory Latencies": "Затримки пам'яті",
-    "Read Latency": "Прочитати затримку",
-    "Write Latency": "Затримка запису",
-    "CPU Boost Clock": "CPU Boost Clock",
-    "CPU UV": "CPU UV",
-    "CPU Unlock": "Розблокування ЦП",
-    "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Максимальна напруга ЦП",
-    "CPU Max Clock": "Максимальна частота ЦП",
-    "Extreme UV Table": "Екстремальний ультрафіолетовий стіл",
-    "CPU UV Table": "CPU UV Таблиця",
-    "CPU Low UV": "CPU Low UV",
-    "CPU High UV": "CPU High UV",
-    "CPU Low VMIN": "CPU Low VMIN",
-    "CPU High VMIN": "CPU High VMIN",
-    "No Undervolt": "Без андервольта",
-    "SLT Table": "Таблиця SLT",
-    "HiOPT Table": "Таблиця HiOPT",
-    "GPU Undervolt Table": "Таблиця зниження напруги GPU",
-    "GPU Minimum Voltage": "Мінімальна напруга GPU",
-    "Calculate GPU Vmin": "Розрахувати GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Максимальна напруга GPU",
-    "GPU Voltage Offset": "Зсув напруги GPU",
-    "Do not override": "Не перевизначати",
-    "Enabled (Default)": "Увімкнено (за замовчуванням)",
-    "96.6% limit": "96,6% обмеження",
-    "99.7% limit": "Обмеження 99,7%.",
-    "GPU Scheduling Override": "Перевизначення планування GPU",
-    "Official Service": "Офіційний сервіс",
-    "GPU DVFS Mode": "Режим GPU DVFS",
-    "GPU DVFS Offset": "GPU DVFS Offset",
-    "GPU Voltage Table": "Таблиця напруги GPU",
-    "GPU Custom Table (mV)": "Спеціальна таблиця GPU (мВ)",
-    "1075MHz without UV, 1152MHz on SLT": "1075 МГц без УФ, 1152 МГц на SLT",
-    "or 1228MHz on HiOPT can cause ": "або 1228 МГц на HiOPT може спричинити",
-    "permanent damage to your Switch!": "незворотне пошкодження вашого комутатора!",
-    "921MHz without UV and 960MHz on": "921 МГц без УФ і 960 МГц увімкнено",
-    "SLT or HiOPT can cause ": "SLT або HiOPT можуть спричинити"
-}

dist/config/horizon-oc/lang/zh-cn.json

@@ -1,157 +0,0 @@
-{
-    "Information": "信息",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "模块: ",
-    "sys-dock status:": "sys-dock 状态:",
-    "SaltyNX status:": "SaltyNX 状态:",
-    "RR Display status:": "RR 显示状态:",
-    "Wafer Position:": "晶圆位置:",
-    "Credits": "致谢",
-    "Developers": "开发者",
-    "Contributors": "贡献者",
-    "Testers": "测试者",
-    "Special Thanks": "特别感谢",
-    "Unknown": "未知",
-    "Installed": "已安装",
-    "Not Installed": "未安装",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "啤酒软件许可协议",
-    "Default": "默认",
-    "Do Not Override": "不修改",
-    "Disabled": "已禁用",
-    "Enabled": "已启用",
-    " \\ue0e3 Reset": " \\ue0e3 重置",
-    "Display": "显示",
-    "Application changed\\n\\n": "应用已变更\\n\\n",
-    "The running application changed\\n\\n": "正在运行的应用已变更\\n\\n",
-    "while editing was going on.": "编辑过程中发生变更。",
-    "Board": "主板",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接到 hoc-clk 系统模块。\\n\\n",
-    "Please make sure everything is\\n\\n": "请确保所有内容均已\\n\\n",
-    "correctly installed and enabled.": "正确安装并启用。",
-    "Fatal error": "致命错误",
-    "Temporary Overrides ": "临时配置 ",
-    "Sleep Mode": "睡眠模式",
-    "Stock": "原厂默认",
-    "Dev OC": "开发者超频",
-    "Boost Mode": "加速模式",
-    "Safe Max": "安全最大值",
-    "Unsafe Max": "危险最大值",
-    "Absolute Max": "绝对最大值",
-    "Handheld Safe Max": "掌机模式安全最大值",
-    "Enable": "启用",
-    "Edit App Profile": "编辑应用配置",
-    "Edit Global Profile": "编辑全局配置",
-    "Temporary Overrides": "临时配置",
-    "Settings": "设置",
-    "About": "关于",
-    "Compiling with minimal features": "以最小功能编译",
-    "General Settings": "通用设置",
-    "Governor Settings": "调频器设置",
-    "Safety Settings": "安全设置",
-    "Save KIP Settings": "保存 KIP 设置",
-    "RAM Settings": "内存设置",
-    "CPU Settings": "CPU 设置",
-    "GPU Settings": "GPU 设置",
-    "Display Settings": "显示设置",
-    "Experimental": "实验性功能",
-    "GPU Scheduling Override Method": "GPU 调度覆盖方式",
-    "can be dangerous and may cause": "存在风险，可能导致",
-    "damage to your battery or charger!": "电池或充电器损坏！",
-    "Charge Current Override": "充电电流修改",
-    "RAM Voltage Display Mode": "内存电压显示模式",
-    "Polling Interval": "刷新间隔",
-    "CPU Governor Minimum Frequency": "CPU 调频器最低频率",
-    "\uE150 Usage of unsafe display": "\uE150 不安全的显示屏",
-    "refresh rates may cause stress": "刷新率可能会对",
-    "or damage to your display! ": "显示屏造成压力或损坏！ ",
-    "Proceed at your own risk!": "操作风险自负！",
-    "Max Handheld Display": "掌机模式最大显示率",
-    "Display Clock": "显示时钟",
-    "Official Rating": "官方额定值",
-    "TDP Threshold": "TDP 阈值",
-    "Power": "电源",
-    "Thermal Throttle Limit": "温控设置",
-    "HP Mode": "高性能模式",
-    "Default (Mariko)": "默认 (Mariko)",
-    "Default (Erista)": "默认 (Erista)",
-    "Rating": "额定值",
-    "Safe Max (Mariko)": "安全最大值 (Mariko)",
-    "Safe Max (Erista)": "安全最大值 (Erista)",
-    "RAM VDD2 Voltage": "内存 VDD2 电压",
-    "Voltage": "电压",
-    "RAM VDDQ Voltage": "内存 VDDQ 电压",
-    "RAM Frequency Editor": "内存频率编辑器",
-    "JEDEC.": "JEDEC 标准。",
-    "High speedo needed!": "需要高 Speedo 配置！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极限 Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极限 Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极限 Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极端 Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极端 Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极端 Speedo/PLL)",
-    "Ram Max Clock": "内存最大频率",
-    "RAM Latency Editor": "内存延迟编辑器",
-    "RAM Timing Reductions": "内存时序优化",
-    "Memory Timings": "内存时序",
-    "Memory": "内存",
-    "mem": "内存",
-    "Governor": "调频器",
-    "Advanced": "高级",
-    "Docked": "底座模式",
-    "Handheld": "掌机模式",
-    "Charging": "充电中",
-    "USB Charger": "USB 充电器",
-    "PD Charger": "PD 充电器", 
-    "Handheld TDP": "掌机模式功耗限制",
-    "Thermal Throttle": "温度控制",
-    "Uncapped Clocks": "解除频率上限",
-    "Soc DVB Shift": "SoC DVB偏移",
-    "Overwrite Boost Mode": "接管官方CPU调度",
-    "Display Refresh Rate Changing": "显示刷新率变更",
-    "t6 tRTW Fine Tune": "t6 tRTW 微调",
-    "tRTW Fine Tune": "tRTW 微调",
-    "t7 tWTR Fine Tune": "t7 tWTR 微调",
-    "tWTR Fine Tune": "tWTR 微调",
-    "Memory Latencies": "内存延迟",
-    "Read Latency": "读取延迟",
-    "Write Latency": "写入延迟",
-    "CPU Boost Clock": "CPU 超频频率",
-    "CPU UV": "CPU 降压",
-    "CPU Unlock": "CPU 解锁",
-    "CPU VMIN": "CPU 最低电压",
-    "CPU Max Voltage": "CPU 最大电压",
-    "CPU Max Clock": "CPU 最大频率",
-    "Extreme UV Table": "极限降压表",
-    "CPU UV Table": "CPU 降压表",
-    "CPU Low UV": "CPU 低压降压",
-    "CPU High UV": "CPU 高压降压",
-    "CPU Low VMIN": "CPU 低压最低电压",
-    "CPU High VMIN": "CPU 高压最低电压",
-    "No Undervolt": "不降压",
-    "SLT Table": "SLT 表",
-    "HiOPT Table": "HiOPT 表",
-    "GPU Undervolt Table": "GPU 降压表",
-    "GPU Minimum Voltage": "GPU 最低电压",
-    "Calculate GPU Vmin": "计算 GPU 最低电压",
-    "GPU VMIN": "GPU 最低电压",
-    "GPU Maximum Voltage": "GPU 最大电压",
-    "GPU Voltage Offset": "GPU 电压偏移",
-    "Do not override": "不修改",
-    "Enabled (Default)": "已启用 (默认)",
-    "96.6% limit": "96.6% 限制",
-    "99.7% limit": "99.7% 限制",
-    "GPU Scheduling Override": "GPU 调度修改",
-    "Official Service": "官方服务",
-    "GPU DVFS Mode": "GPU DVFS 模式",
-    "GPU DVFS Offset": "GPU DVFS 偏移",
-    "GPU Voltage Table": "GPU 电压表",
-    "GPU Custom Table (mV)": "GPU 自定义表 (mV)",
-    "\uE150 Setting GPU Clocks past": "\uE150 将 GPU 频率设置超过",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz 无降压，SLT 表下 1152MHz",
-    "or 1228MHz on HiOPT can cause ": "或 HiOPT 表下 1228MHz 可能导致 ",
-    "permanent damage to your Switch!": "Switch 永久损坏！",
-    "921MHz without UV and 960MHz on": "921MHz 无降压，SLT/HiOPT 表下 960MHz",
-    "SLT or HiOPT can cause ": "可能导致 "
-}

dist/config/horizon-oc/lang/zh-tw.json

@@ -1,141 +0,0 @@
-{
-    "Information": "資訊",
-    "IDDQ:": "國際電話號碼：",
-    "Module: ": "模組：",
-    "sys-dock status:": "系統塢站狀態：",
-    "SaltyNX status:": "SaltyNX 狀態：",
-    "RR Display status:": "RR 顯示狀態：",
-    "Wafer Position:": "晶圓位置：",
-    "Credits": "製作人員",
-    "Developers": "開發商",
-    "Contributors": "貢獻者",
-    "Testers": "測試人員",
-    "Special Thanks": "特別感謝",
-    "Unknown": "未知",
-    "Installed": "已安裝",
-    "Not Installed": "未安裝",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "啤酒製品許可證",
-    "Default": "預設",
-    "Do Not Override": "不要覆蓋",
-    "Disabled": "殘障人士",
-    "Enabled": "啟用",
-    " \\ue0e3 Reset": "\\ue0e3 重設",
-    "Display": "顯示",
-    "Application changed\\n\\n": "應用程式已更改\\n\\n",
-    "The running application changed\\n\\n": "正在運行的應用程式已更改\\n\\n",
-    "while editing was going on.": "當編輯正在進行時。",
-    "Board": "董事會",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "無法連接到 hoc-clk 系統模組。 \\n\\n",
-    "Please make sure everything is\\n\\n": "請確保一切正常\\n\\n",
-    "correctly installed and enabled.": "正確安裝並啟用。",
-    "Fatal error": "致命錯誤",
-    "Temporary Overrides ": "臨時覆蓋",
-    "Sleep Mode": "睡眠模式",
-    "Stock": "庫存",
-    "Dev OC": "開發OC",
-    "Boost Mode": "升壓模式",
-    "Safe Max": "安全最大值",
-    "Unsafe Max": "不安全最大值",
-    "Absolute Max": "絕對最大值",
-    "Handheld Safe Max": "手持式安全最大",
-    "Enable": "啟用",
-    "Edit App Profile": "編輯應用程式設定檔",
-    "Edit Global Profile": "編輯全域設定檔",
-    "Temporary Overrides": "臨時覆蓋",
-    "Settings": "設定",
-    "About": "關於",
-    "Compiling with minimal features": "使用最少的功能進行編譯",
-    "General Settings": "常規設定",
-    "Governor Settings": "調速器設定",
-    "Safety Settings": "安全設定",
-    "Save KIP Settings": "儲存 KIP 設定",
-    "RAM Settings": "記憶體設定",
-    "CPU Settings": "中央處理器設定",
-    "GPU Settings": "GPU設定",
-    "Display Settings": "顯示設定",
-    "Experimental": "實驗性的",
-    "GPU Scheduling Override Method": "GPU調度覆蓋方法",
-    "can be dangerous and may cause": "可能很危險並可能導致",
-    "damage to your battery or charger!": "損壞電池或充電器！",
-    "Charge Current Override": "充電電流覆蓋",
-    "RAM Voltage Display Mode": "RAM電壓顯示模式",
-    "Polling Interval": "輪詢間隔",
-    "CPU Governor Minimum Frequency": "CPU調速器最低頻率",
-    "refresh rates may cause stress": "刷新率可能會造成壓力",
-    "or damage to your display! ": "或損壞您的顯示器！",
-    "Proceed at your own risk!": "請自行承擔風險！",
-    "Max Handheld Display": "最大手持顯示器",
-    "Display Clock": "顯示時鐘",
-    "Official Rating": "官方評級",
-    "TDP Threshold": "TDP閾值",
-    "Power": "電源",
-    "Thermal Throttle Limit": "熱油門限制",
-    "HP Mode": "惠普模式",
-    "Default (Mariko)": "預設（真理子）",
-    "Default (Erista)": "預設（埃里斯塔）",
-    "Rating": "評級",
-    "Safe Max (Mariko)": "安全最大（真理子）",
-    "Safe Max (Erista)": "安全最大（埃里斯塔）",
-    "RAM VDD2 Voltage": "RAM VDD2 電壓",
-    "Voltage": "電壓",
-    "RAM VDDQ Voltage": "RAM VDDQ 電壓",
-    "RAM Frequency Editor": "RAM頻率編輯器",
-    "JEDEC.": "JEDEC。",
-    "High speedo needed!": "需要高速！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz（需要極高的 Speedo/PLL）",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz（需要極高的 Speedo/PLL）",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz（需要極高的 Speedo/PLL）",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz（需要荒謬的 Speedo/PLL）",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz（需要荒謬的 Speedo/PLL）",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz（需要荒謬的 Speedo/PLL）",
-    "Ram Max Clock": "記憶體最大時鐘",
-    "RAM Latency Editor": "RAM 延遲編輯器",
-    "RAM Timing Reductions": "RAM 時序減少",
-    "Memory Timings": "記憶體時序",
-    "Advanced": "進階",
-    "t6 tRTW Fine Tune": "t6 tRTW 微調",
-    "tRTW Fine Tune": "tRTW 微調",
-    "t7 tWTR Fine Tune": "t7 tWTR 微調",
-    "tWTR Fine Tune": "tWTR 微調",
-    "Memory Latencies": "記憶體延遲",
-    "Read Latency": "讀取延遲",
-    "Write Latency": "寫入延遲",
-    "CPU Boost Clock": "CPU 升壓時鐘",
-    "CPU UV": "中央處理器紫外線",
-    "CPU Unlock": "CPU解鎖",
-    "CPU VMIN": "CPU最低電壓",
-    "CPU Max Voltage": "CPU最大電壓",
-    "CPU Max Clock": "CPU 最大時脈",
-    "Extreme UV Table": "極端紫外線表",
-    "CPU UV Table": "CPU UV表",
-    "CPU Low UV": "CPU低紫外線",
-    "CPU High UV": "CPU高紫外線",
-    "CPU Low VMIN": "CPU 低 VMIN",
-    "CPU High VMIN": "CPU 高 VMIN",
-    "No Undervolt": "無欠壓",
-    "SLT Table": "SLT表",
-    "HiOPT Table": "HiOPT表",
-    "GPU Undervolt Table": "GPU 欠壓表",
-    "GPU Minimum Voltage": "GPU最低電壓",
-    "Calculate GPU Vmin": "計算 GPU Vmin",
-    "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "GPU最大電壓",
-    "GPU Voltage Offset": "GPU電壓偏移",
-    "Do not override": "不要覆蓋",
-    "Enabled (Default)": "啟用（預設）",
-    "96.6% limit": "96.6%限制",
-    "99.7% limit": "99.7%限制",
-    "GPU Scheduling Override": "GPU 調度覆蓋",
-    "Official Service": "官方服務",
-    "GPU DVFS Mode": "GPU DVFS 模式",
-    "GPU DVFS Offset": "GPU DVFS 偏移",
-    "GPU Voltage Table": "GPU電壓表",
-    "GPU Custom Table (mV)": "GPU 自訂表 (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "無 UV 時為 1075MHz，SLT 時為 1152MHz",
-    "or 1228MHz on HiOPT can cause ": "或 HiOPT 上的 1228MHz 可能會導致",
-    "permanent damage to your Switch!": "對您的 Switch 造成永久性損壞！",
-    "921MHz without UV and 960MHz on": "無 UV 時為 921MHz，開啟時為 960MHz",
-    "SLT or HiOPT can cause ": "SLT 或 HiOPT 可能會導致"
-}