updated chinese translations by xinluochenjiang
This commit is contained in:
Lightos1
@@ -13,9 +13,7 @@
|
|||||||
"Enabled (Default)": "启用 (默认)",
|
"Enabled (Default)": "启用 (默认)",
|
||||||
"Enable": "启用",
|
"Enable": "启用",
|
||||||
"Fatal error": "严重错误",
|
"Fatal error": "严重错误",
|
||||||
"Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接hoc-clk系统模块。\\n\\n",
|
"hoc-clk is not running.\n\n\nPlease make sure it is correctly\n\ninstalled and enabled.": "刚安装需要重启生效。\n\n\n请进入后台管理确认后台程序正在运行。",
|
||||||
"Please make sure everything is\\n\\n": "请确保所有内容均已\\n\\n",
|
|
||||||
"correctly installed and enabled.": "正确安装且启用。",
|
|
||||||
|
|
||||||
"Edit App Profile": "编辑应用配置",
|
"Edit App Profile": "编辑应用配置",
|
||||||
"Edit Global Profile": "编辑全局配置",
|
"Edit Global Profile": "编辑全局配置",
|
||||||
@@ -27,9 +25,7 @@
|
|||||||
"Updates": "更新菜单",
|
"Updates": "更新菜单",
|
||||||
"Credits": "致谢",
|
"Credits": "致谢",
|
||||||
|
|
||||||
"Application changed\\n\\n": "应用出现变更\\n\\n",
|
"Could not connect to hoc-clk.\n\n\nPlease make sure it is correctly\n\ninstalled and enabled.": "应用已变更\n\n\n无法连接到 hoc-clk。\n\n首次安装请重启。",
|
||||||
"The running application changed\\n\\n": "当前应用在编辑过程中\\n\\n",
|
|
||||||
"while editing was going on.": "出现了变更。",
|
|
||||||
|
|
||||||
"Sleep Mode": "睡眠模式",
|
"Sleep Mode": "睡眠模式",
|
||||||
"Stock": "原厂默认",
|
"Stock": "原厂默认",
|
||||||
@@ -148,6 +144,7 @@
|
|||||||
"3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极限体质)",
|
"3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极限体质)",
|
||||||
"3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极限体质)",
|
"3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极限体质)",
|
||||||
"JEDEC.": "JEDEC",
|
"JEDEC.": "JEDEC",
|
||||||
|
"RAM-Timing tBreak": "内存时序切换阈值",
|
||||||
|
|
||||||
"CPU Boost Clock": "CPU加速频率",
|
"CPU Boost Clock": "CPU加速频率",
|
||||||
"Auto CPU RAM OC": "高内存频率自动提频CPU",
|
"Auto CPU RAM OC": "高内存频率自动提频CPU",
|
||||||
@@ -183,10 +180,10 @@
|
|||||||
"Official Service": "官方服务",
|
"Official Service": "官方服务",
|
||||||
"96.6% limit": "使用率最高96.6%",
|
"96.6% limit": "使用率最高96.6%",
|
||||||
"99.7% limit": "使用率最高99.7%",
|
"99.7% limit": "使用率最高99.7%",
|
||||||
" Setting GPU Clocks past": "警告:在没有适当降压",
|
" Setting GPU Clocks past": "警告:未进行合理降压的前提下，",
|
||||||
"1228MHz without a proper undervolt": "的情况下将GPU频率超到",
|
"1305MHz without a proper undervolt": "将GPU频率拉到1228MHz以上（1305MHz），",
|
||||||
"can cause degradation or damage": "1228MHz以上可能会",
|
"can cause degradation or damage": "会加速硬件老化损耗，",
|
||||||
"to your console!": "更伤主机，乃至造成损失！",
|
"to your console!": "甚至对主机造成永久性硬件损坏！",
|
||||||
"1075MHz without UV, 1152MHz on SLT": "无降压1075MHz，SLT下1152MHz",
|
"1075MHz without UV, 1152MHz on SLT": "无降压1075MHz，SLT下1152MHz",
|
||||||
"or 1228MHz on HiOPT can cause ": "或HiOPT下1228MHz可能会伤主机，",
|
"or 1228MHz on HiOPT can cause ": "或HiOPT下1228MHz可能会伤主机，",
|
||||||
"permanent damage to your Switch!": "乃至造成无法挽回的损失！",
|
"permanent damage to your Switch!": "乃至造成无法挽回的损失！",
|
||||||
|
|||||||
@@ -4,212 +4,267 @@
|
|||||||
"Installed": "已安裝",
|
"Installed": "已安裝",
|
||||||
"Not Installed": "未安裝",
|
"Not Installed": "未安裝",
|
||||||
"Default": "預設",
|
"Default": "預設",
|
||||||
"Do Not Override": "不要覆蓋",
|
"Do Not Override": "不修改",
|
||||||
"Do not override": "不要覆蓋",
|
"No Override": "不修改",
|
||||||
"Disabled": "已停用",
|
"Do not override": "不修改",
|
||||||
"Enabled": "已啟用",
|
"Auto": "自動",
|
||||||
"Enabled (Default)": "已啟用（預設）",
|
"Disabled": "停用",
|
||||||
|
"Enabled": "啟用",
|
||||||
|
"Enabled (Default)": "啟用 (預設)",
|
||||||
"Enable": "啟用",
|
"Enable": "啟用",
|
||||||
"Fatal error": "致命錯誤",
|
"Fatal error": "嚴重錯誤",
|
||||||
"Could not connect to hoc-clk sysmodule.\\n\\n": "無法連接到 hoc-clk 系統模組。\\n\\n",
|
"hoc-clk is not running.\n\n\nPlease make sure it is correctly\n\ninstalled and enabled.": "剛安裝需要重啟生效。\n\n\n請進入後台管理確認後台程式正在執行。",
|
||||||
"Please make sure everything is\\n\\n": "請確保一切正常\\n\\n",
|
|
||||||
"correctly installed and enabled.": "正確安裝並啟用。",
|
|
||||||
|
|
||||||
"Edit App Profile": "編輯應用程式設定檔",
|
"Edit App Profile": "編輯應用配置",
|
||||||
"Edit Global Profile": "編輯全域設定檔",
|
"Edit Global Profile": "編輯全域配置",
|
||||||
"Temporary Overrides": "臨時覆蓋",
|
"Temporary Overrides": "臨時配置",
|
||||||
"Temporary Overrides ": "臨時覆蓋",
|
"Temporary Overrides ": "臨時配置",
|
||||||
" Reset": " 重設",
|
" Reset": " 重設",
|
||||||
"Settings": "設定",
|
"Settings": "設定",
|
||||||
"About": "關於",
|
"About": "關於",
|
||||||
"Credits": "製作人員",
|
"Updates": "更新選單",
|
||||||
|
"Credits": "致謝",
|
||||||
|
|
||||||
"Application changed\\n\\n": "應用程式已更改\\n\\n",
|
"Could not connect to hoc-clk.\n\n\nPlease make sure it is correctly\n\ninstalled and enabled.": "應用已變更\n\n\n無法連接到 hoc-clk。\n\n首次安裝請重啟。",
|
||||||
"The running application changed\\n\\n": "正在運行的應用程式已更改\\n\\n",
|
|
||||||
"while editing was going on.": "當編輯正在進行時。",
|
|
||||||
|
|
||||||
"Sleep Mode": "睡眠模式",
|
"Sleep Mode": "睡眠模式",
|
||||||
"Stock": "原廠預設",
|
"Stock": "原廠預設",
|
||||||
"Dev OC": "開發OC",
|
"Dev OC": "開發者超頻",
|
||||||
"Boost Mode": "升壓模式",
|
"Boost Mode": "加速模式",
|
||||||
"Safe Max": "安全最大值",
|
"Safe Max": "安全最大值",
|
||||||
"Unsafe Max": "不安全最大值",
|
"Unsafe Max": "危險最大值",
|
||||||
"Absolute Max": "絕對最大值",
|
"Absolute Max": "絕對最大值",
|
||||||
"Handheld Safe Max": "手持式安全最大值",
|
"Handheld Safe Max": "掌機安全最大值",
|
||||||
|
|
||||||
"General Settings": "常規設定",
|
"General Settings": "通用設定",
|
||||||
"Governor Settings": "調速器設定",
|
"Governor Settings": "調頻器設定",
|
||||||
"Safety Settings": "安全設定",
|
"Safety Settings": "安全設定",
|
||||||
"Save KIP Settings": "儲存 KIP 設定",
|
"Save KIP Settings": "儲存KIP設定",
|
||||||
"RAM Settings": "記憶體設定",
|
"RAM Settings": "記憶體設定",
|
||||||
"CPU Settings": "中央處理器設定",
|
"CPU Settings": "CPU設定",
|
||||||
"GPU Settings": "GPU設定",
|
"GPU Settings": "GPU設定",
|
||||||
"Display Settings": "顯示設定",
|
"Display Settings": "螢幕設定",
|
||||||
"Experimental Settings": "實驗性設定",
|
"Experimental Settings": "實驗性設定",
|
||||||
"Experimental": "實驗性的",
|
"Experimental": "實驗性功能",
|
||||||
|
|
||||||
" Settings marked in blue": "藍色標示的設定",
|
" Settings marked in blue": "藍色的設定更改後可立即生效，",
|
||||||
"don't require a reboot to apply!": "無需重開機即可套用！",
|
"don't require a reboot to apply!": "無需重啟主機。",
|
||||||
"You can also press to show": "也可按 顯示",
|
"You can also press to show": "按可以查看每項設置的",
|
||||||
"information about each setting.": "每項設定的說明。",
|
"information about each setting.": "詳細說明(英文)。",
|
||||||
|
|
||||||
" Experimental Settings are incomplete ": "實驗性設定尚未完成",
|
" Experimental Settings are incomplete ": "實驗性設定尚未正式完成，",
|
||||||
"and may not work correctly or at all!": "且可能無法正常運作！",
|
"and may not work correctly or at all!": "可能導致當機崩潰等意外後果！",
|
||||||
"Here be dragons!": "此處有危險！",
|
"Here be dragons!": "風險自負！",
|
||||||
|
|
||||||
"RAM Voltage Display Mode": "RAM電壓顯示模式",
|
"RAM Voltage Display Mode": "記憶體電壓顯示模式",
|
||||||
"RAM Display Unit": "記憶體顯示單位",
|
"RAM Display Unit": "記憶體顯示單位",
|
||||||
"Polling Interval": "輪詢間隔",
|
"Polling Interval": "輪詢間隔",
|
||||||
|
"Enable Experimental Settings": "啟用實驗性設定",
|
||||||
|
|
||||||
"GPU Scheduling Override Method": "GPU調度覆蓋方法",
|
"Mariko Middle Clocks": "啟用GPU中頻",
|
||||||
"GPU Scheduling Override": "GPU 調度覆蓋",
|
"Live CPU Undervolt": "即時CPU降壓",
|
||||||
"GPU Boot Volt": "GPU 啟動電壓",
|
"GPU Scheduling Override Method": "GPU調度修改方式",
|
||||||
"GPU Boot Voltage": "GPU 啟動電壓",
|
"GPU Scheduling Override": "GPU調度修改",
|
||||||
|
"GPU Boot Volt": "GPU啟動電壓",
|
||||||
|
"GPU Boot Voltage": "GPU啟動電壓",
|
||||||
"Memory Frequency Measurement Mode": "記憶體頻率測量模式",
|
"Memory Frequency Measurement Mode": "記憶體頻率測量模式",
|
||||||
" Overriding the charge current": "覆蓋充電電流",
|
" Overriding the charge current": "修改電池充電電流",
|
||||||
"can be dangerous and may cause": "可能很危險並可能導致",
|
"can be dangerous and may cause": "存在一定風險，可能會傷電池",
|
||||||
"damage to your battery or charger!": "損壞電池或充電器！",
|
"damage to your battery or charger!": "或充電器！",
|
||||||
"Charge Current Override": "充電電流覆蓋",
|
"Charge Current Override": "修改充電電流",
|
||||||
"Display Color Preset": "顯示顏色預設",
|
" Overriding the input current": "修改輸入電流可能會增加主機",
|
||||||
"Basic": "基本",
|
"limit increases power draw from": "從充電器獲取的電流。",
|
||||||
|
"your charger. And board stress ": "主機板本身最大電流為",
|
||||||
|
"use 1500mA max.": "1500mA。",
|
||||||
|
"Input Current Limit Override": "修改主機輸入電流",
|
||||||
|
"Display Color Preset": "螢幕濾鏡",
|
||||||
|
"Basic": "基礎",
|
||||||
"Saturated": "飽和",
|
"Saturated": "飽和",
|
||||||
"Washed": "淡色",
|
"Washed": "淡色",
|
||||||
"Natural": "自然",
|
"Natural": "自然",
|
||||||
"Vivid": "鮮艷",
|
"Vivid": "鮮艷",
|
||||||
|
|
||||||
"CPU Governor Minimum Frequency": "CPU調速器最低頻率",
|
"CPU Governor Minimum Frequency": "CPU調頻器最低頻率",
|
||||||
" Usage of unsafe display": "不安全的顯示率",
|
" Usage of unsafe display": "調整螢幕更新率",
|
||||||
"refresh rates may cause stress": "刷新率可能會造成壓力",
|
"refresh rates may cause stress": "可能會傷螢幕，",
|
||||||
"or damage to your display! ": "或損壞您的顯示器！",
|
"or damage to your display! ": "乃至造成損失！",
|
||||||
"Proceed at your own risk!": "請自行承擔風險！",
|
"Proceed at your own risk!": "風險自負！",
|
||||||
"Max Handheld Display": "最大手持顯示器",
|
"Display Refresh Rate Changing": "修改螢幕更新率",
|
||||||
"Max Handheld Display Hz": "最大手持顯示率 Hz",
|
"Max Handheld Display": "掌機最大更新率",
|
||||||
"Display Clock": "顯示時鐘",
|
"Max Handheld Display Hz": "掌機最大更新率",
|
||||||
" Adjust the display voltage": "調整顯示電壓",
|
"Display Clock": "螢幕更新率",
|
||||||
"with caution to avoid damage": "請謹慎操作以避免損壞",
|
" Adjust the display voltage": "請謹慎調整顯示電壓",
|
||||||
"to your display panel! ": "顯示面板！",
|
"with caution to avoid damage": "請謹慎以避免損壞",
|
||||||
"Display Voltage": "顯示電壓",
|
"to your display panel! ": "螢幕面板！",
|
||||||
|
"Display Voltage": "螢幕電壓",
|
||||||
|
|
||||||
"Thermal Throttle Limit": "熱油門限制",
|
"Uncapped Clocks": "解鎖頻率",
|
||||||
"Official Rating": "官方評級",
|
"Thermal Throttle": "過熱保護",
|
||||||
|
"Thermal Throttle Limit": "過熱保護溫度",
|
||||||
|
"Official Rating": "官方額定值",
|
||||||
"TDP Threshold": "TDP閾值",
|
"TDP Threshold": "TDP閾值",
|
||||||
"Power": "電源",
|
"Power": "電源",
|
||||||
"HP Mode": "高效能模式",
|
"HP Mode": "高性能模式",
|
||||||
|
|
||||||
"DVB Shift": "DVB 偏移",
|
"DVB Shift": "DVB偏移",
|
||||||
"SoC Max Volt": "SoC 最大電壓",
|
"SoC Max Volt": "SoC最高電壓",
|
||||||
"Step Mode": "步進模式",
|
"Step Mode": "步進模式",
|
||||||
"RAM VDD2 Voltage": "RAM VDD2 電壓",
|
"RAM VDD2 Voltage": "記憶體VDD2電壓",
|
||||||
"RAM VDDQ Voltage": "RAM VDDQ 電壓",
|
"RAM VDDQ Voltage": "記憶體VDDQ電壓",
|
||||||
"Voltage": "電壓",
|
"Voltage": "電壓",
|
||||||
"RAM Frequency Editor": "RAM頻率編輯器",
|
"RAM Frequency Editor": "記憶體頻率編輯",
|
||||||
"Ram Max Clock": "記憶體最大時脈",
|
"Ram Max Clock": "記憶體最高頻率",
|
||||||
"RAM Latency Editor": "RAM 延遲編輯器",
|
"RAM Latency Editor": "記憶體延遲編輯",
|
||||||
"RAM Timing Reductions": "RAM 時序減少",
|
"RAM Timing Reductions": "記憶體時序最佳化",
|
||||||
|
"SOC Voltage Table": "自訂SOC電壓",
|
||||||
|
"SOC Custom Voltages": "自訂SOC電壓",
|
||||||
"Memory Timings": "記憶體時序",
|
"Memory Timings": "記憶體時序",
|
||||||
"Advanced": "進階",
|
"Advanced": "進階",
|
||||||
"t6 tRTW Fine Tune": "t6 tRTW 微調",
|
"t6 tRTW Fine Tune": "t6 tRTW微調",
|
||||||
"tRTW Fine Tune": "tRTW 微調",
|
"tRTW Fine Tune": "tRTW微調",
|
||||||
"t7 tWTR Fine Tune": "t7 tWTR 微調",
|
"t7 tWTR Fine Tune": "t7 tWTR微調",
|
||||||
"tWTR Fine Tune": "tWTR 微調",
|
"tWTR Fine Tune": "tWTR微調",
|
||||||
"Memory Latencies": "記憶體延遲",
|
"Memory Latencies": "記憶體延遲",
|
||||||
"Read Latency": "讀取延遲",
|
"Read Latency": "讀取延遲",
|
||||||
"Write Latency": "寫入延遲",
|
"Write Latency": "寫入延遲",
|
||||||
"High speedo needed!": "需要高 Speedo 值！",
|
"Latency Graph": "延遲可視化圖",
|
||||||
"3333MHz (Needs extreme Speedo/PLL)": "3333MHz（需要極高的 Speedo/PLL）",
|
"Latency Max": "延遲最高頻率"
|
||||||
"3366MHz (Needs extreme Speedo/PLL)": "3366MHz（需要極高的 Speedo/PLL）",
|
"1333 Latency Max": "1333延遲最高頻率",
|
||||||
"3400MHz (Needs extreme Speedo/PLL)": "3400MHz（需要極高的 Speedo/PLL）",
|
"1600 Latency Max": "1600延遲最高頻率",
|
||||||
"3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz（需要荒謬的 Speedo/PLL）",
|
"1866 Latency Max": "1866延遲最高頻率",
|
||||||
"3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz（需要荒謬的 Speedo/PLL）",
|
"2133 Latency Max": "2133延遲最高頻率",
|
||||||
"3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz（需要荒謬的 Speedo/PLL）",
|
"Read": "讀取",
|
||||||
"JEDEC.": "JEDEC。",
|
"Write": "寫入",
|
||||||
|
"Same": "相同"
|
||||||
|
"High speedo needed!": "需要高體質！",
|
||||||
|
"3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要極高體質)",
|
||||||
|
"3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要極高體質)",
|
||||||
|
"3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要極高體質)",
|
||||||
|
"3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要極限體質)",
|
||||||
|
"3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要極限體質)",
|
||||||
|
"3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要極限體質)",
|
||||||
|
"JEDEC.": "JEDEC",
|
||||||
|
"RAM-Timing tBreak": "記憶體時序切換閾值",
|
||||||
|
|
||||||
"CPU Boost Clock": "CPU 升壓時脈",
|
"CPU Boost Clock": "CPU加速頻率",
|
||||||
"CPU UV": "CPU 降壓",
|
"Auto CPU RAM OC": "高記憶體頻率自動提頻CPU",
|
||||||
|
"Auto CPU RAM OC CPU clock": "自動提頻CPU頻率",
|
||||||
|
"Auto CPU RAM OC Threshold": "自動提頻觸發閾值",
|
||||||
|
"Overwrite Boost Mode": "接管系統CPU調度",
|
||||||
|
"CPU UV": "CPU降壓",
|
||||||
"CPU Unlock": "CPU解鎖",
|
"CPU Unlock": "CPU解鎖",
|
||||||
"CPU VMIN": "CPU 最低電壓",
|
"CPU VMIN": "CPU最低電壓",
|
||||||
"CPU Max Voltage": "CPU最大電壓",
|
"CPU Max Voltage": "CPU最高電壓",
|
||||||
"CPU Max Clock": "CPU 最大時脈",
|
"CPU Max Clock": "CPU最高頻率",
|
||||||
"Extreme UV Table": "極限降壓表",
|
"Extreme UV Table": "極限降壓",
|
||||||
"CPU UV Table": "CPU 降壓表",
|
"CPU UV Table": "CPU降壓模式",
|
||||||
"CPU Low UV": "CPU 低壓降壓",
|
"CPU Low UV": "CPU低頻降壓",
|
||||||
"CPU High UV": "CPU 高壓降壓",
|
"CPU High UV": "CPU高頻降壓",
|
||||||
"CPU Low VMIN": "CPU 低 VMIN",
|
"CPU Low VMIN": "CPU低頻最低電壓",
|
||||||
"CPU High VMIN": "CPU 高 VMIN",
|
"CPU High VMIN": "CPU高頻最低電壓",
|
||||||
|
|
||||||
"No Undervolt": "無欠壓",
|
"No Undervolt": "無降壓",
|
||||||
"SLT Table": "SLT表",
|
"SLT Table": "SLT",
|
||||||
"HiOPT Table": "HiOPT表",
|
"HiOPT Table": "HiOPT",
|
||||||
"GPU Undervolt Table": "GPU 欠壓表",
|
"High UV Table": "高降壓",
|
||||||
|
"GPU Undervolt Table": "GPU降壓模式",
|
||||||
"GPU Minimum Voltage": "GPU最低電壓",
|
"GPU Minimum Voltage": "GPU最低電壓",
|
||||||
"Calculate GPU Vmin": "計算 GPU Vmin",
|
"Calculate GPU Vmin": "計算GPU最低電壓",
|
||||||
"GPU VMIN": "GPU VMIN",
|
"GPU VMIN": "GPU最低電壓",
|
||||||
"GPU Maximum Voltage": "GPU最大電壓",
|
"GPU Maximum Voltage": "GPU最高電壓",
|
||||||
"GPU Voltage Offset": "GPU電壓偏移",
|
"GPU Voltage Offset": "GPU電壓偏移",
|
||||||
"GPU DVFS Mode": "GPU DVFS 模式",
|
"GPU DVFS Mode": "GPU DVFS模式",
|
||||||
"GPU DVFS Offset": "GPU DVFS 偏移",
|
"GPU DVFS Offset": "GPU DVFS偏移",
|
||||||
"GPU Voltage Table": "GPU電壓表",
|
"GPU Voltage Table": "自訂GPU電壓",
|
||||||
"GPU Custom Table (mV)": "GPU 自訂表 (mV)",
|
"GPU Custom Table (mV)": "GPU自訂電壓(mV)",
|
||||||
"Official Service": "官方服務",
|
"Official Service": "官方服務",
|
||||||
"96.6% limit": "96.6%限制",
|
"96.6% limit": "使用率最高96.6%",
|
||||||
"99.7% limit": "99.7%限制",
|
"99.7% limit": "使用率最高99.7%",
|
||||||
" Setting GPU Clocks past": "將 GPU 頻率設定超過",
|
" Setting GPU Clocks past": "警告:未進行合理降壓的前提下，",
|
||||||
"1228MHz without a proper undervolt": "1228MHz 未適當降壓",
|
"1305MHz without a proper undervolt": "將GPU頻率拉到1228MHz以上（1305MHz），",
|
||||||
"can cause degradation or damage": "可能導致劣化或損壞",
|
"can cause degradation or damage": "會加速硬體老化損耗，",
|
||||||
"to your console!": "您的主機！",
|
"to your console!": "甚至對主機造成永久性硬體損壞！",
|
||||||
"1075MHz without UV, 1152MHz on SLT": "無 UV 時為 1075MHz，SLT 時為 1152MHz",
|
"1075MHz without UV, 1152MHz on SLT": "無降壓1075MHz，SLT下1152MHz",
|
||||||
"or 1228MHz on HiOPT can cause ": "或 HiOPT 上的 1228MHz 可能會導致",
|
"or 1228MHz on HiOPT can cause ": "或HiOPT下1228MHz可能會傷主機，",
|
||||||
"permanent damage to your Switch!": "對您的 Switch 造成永久性損壞！",
|
"permanent damage to your Switch!": "乃至造成無法挽回的損失！",
|
||||||
"921MHz without UV and 960MHz on": "無 UV 時為 921MHz，開啟時為 960MHz",
|
"921MHz without UV and 960MHz on": "無降壓921MHz，SLT/HiOPT 表下 960MHz",
|
||||||
"SLT or HiOPT can cause ": "SLT 或 HiOPT 可能會導致",
|
"SLT or HiOPT can cause ": "可能導致",
|
||||||
|
|
||||||
"Default (Mariko)": "預設 (Mariko)",
|
"Default (Mariko)": "預設(續航版)",
|
||||||
"Default (Erista)": "預設 (Erista)",
|
"Default (Erista)": "預設(初版)",
|
||||||
"Rating": "評級",
|
"Rating": "額定值",
|
||||||
"Safe Max (Mariko)": "安全最大值 (Mariko)",
|
"Safe Max (Mariko)": "安全最大值(續航版)",
|
||||||
"Safe Max (Erista)": "安全最大值 (Erista)",
|
"Safe Max (Erista)": "安全最大值(初版)",
|
||||||
|
|
||||||
"Voltages": "電壓",
|
"Voltages": "電壓",
|
||||||
"RAM Voltage:": "記憶體電壓：",
|
"RAM Voltage:": "記憶體電壓:",
|
||||||
"Display Voltage:": "顯示電壓：",
|
"Display Voltage:": "螢幕電壓:",
|
||||||
"Temperatures": "溫度",
|
"Temperatures": "溫度",
|
||||||
"PLLX Temp:": "PLLX 溫度：",
|
"PLLX Temp:": "PLLX溫度:",
|
||||||
"AOTAG Temp:": "AOTAG 溫度：",
|
"AOTAG Temp:": "AOTAG溫度:",
|
||||||
"BQ24193 Temp:": "BQ24193 溫度：",
|
"BQ24193 Temp:": "BQ24193溫度:",
|
||||||
"Normal": "正常",
|
"Normal": "正常",
|
||||||
"Warm": "溫熱",
|
"Warm": "溫熱",
|
||||||
"Hot": "過熱",
|
"Hot": "較熱",
|
||||||
"Overheat": "嚴重過熱",
|
"Overheat": "過熱",
|
||||||
"Not Patched": "未修補",
|
"Not Patched": "未修補",
|
||||||
"Invalid": "無效",
|
"Invalid": "無效",
|
||||||
"RAM Bandwidth": "記憶體頻寬",
|
"RAM Bandwidth": "記憶體頻寬",
|
||||||
"RAM BW (Peak):": "RAM頻寬(峰值)：",
|
"RAM BW (Peak):": "記憶體頻寬(最高):",
|
||||||
"RAM BW (All):": "RAM頻寬(全部)：",
|
"RAM BW (All):": "記憶體頻寬(目前):",
|
||||||
"RAM BW (CPU):": "RAM頻寬(CPU)：",
|
"RAM BW (CPU):": "記憶體頻寬(CPU):",
|
||||||
"RAM BW (GPU):": "RAM頻寬(GPU)：",
|
"RAM BW (GPU):": "記憶體頻寬(GPU):",
|
||||||
"Hardware Info": "硬體資訊",
|
"Hardware Info": "硬體資訊",
|
||||||
"Console Type:": "主機類型：",
|
"Console Type:": "主機類型:",
|
||||||
"Speedo:": "Speedo：",
|
"Speedo:": "體質分:",
|
||||||
"DRAM Module: ": "DRAM 模組：",
|
"DRAM Module: ": "記憶體顆粒: ",
|
||||||
"Software Info": "軟體資訊",
|
"Software Info": "軟體資訊",
|
||||||
"KIP version:": "KIP 版本：",
|
"KIP version:": "KIP版本:",
|
||||||
"sys-dock status:": "系統塢站狀態：",
|
"sys-dock status:": "sys-dock狀態:",
|
||||||
"SaltyNX status:": "SaltyNX 狀態：",
|
"SaltyNX status:": "SaltyNX狀態:",
|
||||||
"RR Display status:": "RR 顯示狀態：",
|
"RR Display status:": "RR顯示狀態:",
|
||||||
"Wafer Position:": "晶圓位置：",
|
"General Info": "其他資訊",
|
||||||
"IDDQ:": "IDDQ：",
|
"Wafer Position:": "晶圓位置:",
|
||||||
"Module: ": "模組：",
|
"IDDQ:": "IDDQ:",
|
||||||
"Board": "主板",
|
"Module: ": "模組: ",
|
||||||
"Display": "顯示",
|
|
||||||
|
|
||||||
"Developers": "開發商",
|
"App ID": "應用ID",
|
||||||
"Contributors": "貢獻者",
|
"Profile": "目前配置",
|
||||||
"Testers": "測試人員",
|
"Docked": "底座模式",
|
||||||
|
"Handheld": "掌機模式",
|
||||||
|
"PD Charger": "PD充電器",
|
||||||
|
"USB Charger": "USB充電器",
|
||||||
|
"Memory": "記憶體",
|
||||||
|
"MEM": "記憶體",
|
||||||
|
"Governor": "調頻器",
|
||||||
|
"Board": "主機板",
|
||||||
|
"Display": "螢幕",
|
||||||
|
"BAT": "電池",
|
||||||
|
"Fan": "風扇",
|
||||||
|
"Now": "目前",
|
||||||
|
"Avg": "平均",
|
||||||
|
"OLED": "螢幕",
|
||||||
|
"LCD": "螢幕"
|
||||||
|
|
||||||
|
"Releases": "發行版本",
|
||||||
|
"Horizon OC + Extensions": "Horizon OC+附加包",
|
||||||
|
"Status": "狀態",
|
||||||
|
"Downloading": "正在下載",
|
||||||
|
"Extracting": "正在解壓",
|
||||||
|
"Download cancelled": "下載已取消",
|
||||||
|
"Download failed -- check network": "下載失敗，請檢查網路",
|
||||||
|
"Extraction cancelled": "解壓已取消",
|
||||||
|
"Extraction failed -- archive may be corrupt": "解壓失敗，文件可能損壞",
|
||||||
|
"Update complete! Restart required.": "更新完成，重啟生效",
|
||||||
|
|
||||||
|
"Developers": "開發",
|
||||||
|
"Contributors": "貢獻",
|
||||||
|
"Testers": "測試",
|
||||||
"Translators": "翻譯",
|
"Translators": "翻譯",
|
||||||
"Special Thanks": "特別感謝",
|
"Special Thanks": "特別感謝",
|
||||||
|
|
||||||
"X: %u Y: %u": "X: %u Y: %u",
|
"X: %u Y: %u": "X: %u Y: %u",
|
||||||
"%u.%u%u mV": "%u.%u%u mV",
|
"%u.%u%u mV": "%u.%u%u mV",
|
||||||
"Compiling with minimal features": "使用最少的功能進行編譯",
|
"Compiling with minimal features": "以最小功能編譯",
|
||||||
"THE BEER-WARE LICENSE": "啤酒製品許可證"
|
"THE BEER-WARE LICENSE": "啤酒軟體許可協議"
|
||||||
}
|
}
|
||||||
|
|||||||
Reference in New Issue
Block a user