utils: Fix ms timer accuracy

Additionally add BPMP delay timers for future use.

bootloader/soc/bpmp.c

@@ -216,3 +216,37 @@ void bpmp_clk_rate_set(bpmp_freq_t fid)
 	}
 }
 
+// The following functions halt BPMP to reduce power while sleeping.
+// They are not as accurate as RTC at big values but they guarantee time+ delay.
+void bpmp_usleep(u32 us)
+{
+	u32 delay;
+
+	// Each iteration takes 1us.
+	while (us)
+	{
+		delay = (us > HALT_COP_MAX_CNT) ? HALT_COP_MAX_CNT : us;
+		us -= delay;
+
+		FLOW_CTLR(FLOW_CTLR_HALT_COP_EVENTS) = HALT_COP_WAIT_EVENT | HALT_COP_USEC | delay;
+	}
+}
+
+void bpmp_msleep(u32 ms)
+{
+	u32 delay;
+
+	// Iteration time is variable. ~200 - 1000us.
+	while (ms)
+	{
+		delay = (ms > HALT_COP_MAX_CNT) ? HALT_COP_MAX_CNT : ms;
+		ms -= delay;
+
+		FLOW_CTLR(FLOW_CTLR_HALT_COP_EVENTS) = HALT_COP_WAIT_EVENT | HALT_COP_MSEC | delay;
+	}
+}
+
+void bpmp_halt()
+{
+	FLOW_CTLR(FLOW_CTLR_HALT_COP_EVENTS) = HALT_COP_WAIT_EVENT | HALT_COP_JTAG;
+}

bootloader/soc/bpmp.h

@@ -47,5 +47,8 @@ void bpmp_mmu_set_entry(int idx, bpmp_mmu_entry_t *entry, bool apply);
 void bpmp_mmu_enable();
 void bpmp_mmu_disable();
 void bpmp_clk_rate_set(bpmp_freq_t fid);
+void bpmp_usleep(u32 us);
+void bpmp_msleep(u32 ms);
+void bpmp_halt();
 
 #endif

bootloader/soc/cluster.h

@@ -19,19 +19,6 @@
 
 #include "../utils/types.h"
 
-/*! Flow controller registers. */
-#define FLOW_CTLR_HALT_CPU0_EVENTS 0x0
-#define FLOW_CTLR_HALT_CPU1_EVENTS 0x14
-#define FLOW_CTLR_HALT_CPU2_EVENTS 0x1C
-#define FLOW_CTLR_HALT_CPU3_EVENTS 0x24
-#define FLOW_CTLR_HALT_COP_EVENTS 0x4
-#define FLOW_CTLR_CPU0_CSR 0x8
-#define FLOW_CTLR_CPU1_CSR 0x18
-#define FLOW_CTLR_CPU2_CSR 0x20
-#define FLOW_CTLR_CPU3_CSR 0x28
-#define FLOW_CTLR_RAM_REPAIR 0x40
-#define FLOW_CTLR_BPMP_CLUSTER_CONTROL 0x98
-
 void cluster_boot_cpu0(u32 entry);
 
 #endif

bootloader/soc/t210.h

@@ -189,4 +189,24 @@
 #define  EMC_HEKA_UPD (1 << 30)
 #define  EMC_SEPT_RUN (1 << 31)
 
+/*! Flow controller registers. */
+#define FLOW_CTLR_HALT_COP_EVENTS  0x4
+#define  HALT_COP_SEC        (1 << 23)
+#define  HALT_COP_MSEC       (1 << 24)
+#define  HALT_COP_USEC       (1 << 25)
+#define  HALT_COP_JTAG       (1 << 28)
+#define  HALT_COP_WAIT_EVENT (1 << 30)
+#define  HALT_COP_WAIT_IRQ   (1 << 31)
+#define  HALT_COP_MAX_CNT        0xFF
+#define FLOW_CTLR_HALT_CPU0_EVENTS 0x0
+#define FLOW_CTLR_HALT_CPU1_EVENTS 0x14
+#define FLOW_CTLR_HALT_CPU2_EVENTS 0x1C
+#define FLOW_CTLR_HALT_CPU3_EVENTS 0x24
+#define FLOW_CTLR_CPU0_CSR 0x8
+#define FLOW_CTLR_CPU1_CSR 0x18
+#define FLOW_CTLR_CPU2_CSR 0x20
+#define FLOW_CTLR_CPU3_CSR 0x28
+#define FLOW_CTLR_RAM_REPAIR 0x40
+#define FLOW_CTLR_BPMP_CLUSTER_CONTROL 0x98
+
 #endif