Commit Graph
594 Commits
Author SHA1 Message Date
CTCaer ba71fb0dba bdk: se: optimize and update aes cmac hashing
`se_aes_cmac_128` was also renamed to `se_aes_hash_cmac`.
By following the convention of 128bit functions not having size in their name.
2026-03-27 09:59:42 +01:00
CTCaer d1066da9fa bdk: se: handle original and updated IV in one go
IV set now requires a size where the second block is updated IV
IV clear now clears both.
2026-03-27 09:59:42 +01:00
CTCaer 542fba6fbd bdk: se: support partial blocks for all aes modes 2026-03-27 09:59:42 +01:00
CTCaer 1295152f20 bdk: se: do a trivial refactor pass 2026-03-27 09:59:42 +01:00
CTCaer 9ebd03802f bdk: heap: use ultra fast defragmentation
The defragmentation runs on every free and it only merges subsequent nodes.
So there's no point of looping all nodes.
So, just check if previous and next nodes are mergeable.
This makes free performant and achieves the same exact functionality.
2026-03-27 09:59:42 +01:00
CTCaer d391ef3b0f bdk: max17050: simplify calculations
And make current readings a tiny bit (±0.16%) more accurate.
2026-03-27 09:58:48 +01:00
CTCaer 9ef684037b bdk: max17050: remove unused cached batt voltage 2026-03-27 09:58:48 +01:00
CTCaer 19279fa57d bdk: joycon: improve charger config
Utilize charger config set command which allows for supplement mode.
Additionally, remove ping config when SIO and parse buttons/sticks on subcmd reports.
2026-03-27 09:58:48 +01:00
CTCaer 2004b38f41 bdk: ccplex: do not disable mselect on cpu pwrgate 2026-03-27 09:57:59 +01:00
CTCaer 8220466523 bdk: heap: add more safe guards
- Use magic for used regions
- Deduplicate calloc
Enable a print/abort in _heap_free() for debugging.
2026-03-27 09:57:59 +01:00
CTCaer d379a17444 bdk: display: improve and deduplicate more
- Add delay after a DSI soft reset
- Remove more duplicated configs
- Improve code to save code size
- Improve comments
- Do not allow display_backlight to be used with OLED
2026-03-27 09:57:59 +01:00
CTCaer db4c6a0b69 bdk: util: use volatile base for reg_write_array 2026-03-27 09:57:59 +01:00
CTCaer 8b86bf3808 bdk: display: use a scratch reg for backlight
Spare registers normally have hidden hw config usage, so avoid them just in case.
2026-03-27 09:57:59 +01:00
CTCaer 46fa18be89 bdk: display: simplify macros
Expand register index in parent macro and remove _DI/_DSIREG macros.
2026-03-27 09:57:59 +01:00
CTCaer c17881f2c3 bdk: display: use spare reg to store dcs bl duty
And also remove backlight pwm restoring from coreboot hw deinit path.
2026-03-27 09:57:59 +01:00
CTCaer c907d143b7 bdk: fatfs: improve fat read/write
- Convert access from min cluster size to block size
  Also allow read/writes to less than cluster size
- In case of intercluster access throw an error
- Do not error on zero size

On reads buffer still needs to be block (instead of cluster) aligned.
On writes, buffer still needs to be readable out of bounds.
2026-03-27 09:57:59 +01:00
CTCaer ffc0aa2c3d bdk: fuse: return array size with fuse_read_array 2026-03-27 09:57:23 +01:00
CTCaer 76922b7b87 bdk: minerva: add IRB support
Aka no table support.
2026-03-27 09:55:12 +01:00
CTCaer 03cb1aac29 bdk: clock: update some defines 2026-03-27 09:54:06 +01:00
CTCaer 61cb77a016 bdk: sdmmc: add defines for max block number 2026-03-27 09:54:06 +01:00
CTCaer 8d525a3c50 bdk: add reserved cfg to ipl meta and nyx storage 2026-03-27 09:51:47 +01:00
CTCaer ef0ab0b0f1 bdk: sdmmc: correct drive ohms comment 2026-03-27 09:51:47 +01:00
CTCaer 7b7906efc2 bdk: clock: add i2c to the errata affected list 2026-03-27 09:51:47 +01:00
CTCaer e29d139946 bdk: fuse: allow overriding dram id fuses
This should be set before running sdram init.
fuse_read_dramid(true) will still return the real id.
2026-03-27 09:51:47 +01:00
CTCaer b862311c0c bdl: minerva: add deinit function
Removes dependency to Nyx storage for hw init too.
2026-03-27 09:51:46 +01:00
CTCaer 11b49e3bbc bdk: nyx: rename disp_id to panel_id 2026-03-27 09:51:46 +01:00
CTCaer ac245a0b6f bdk: minerva: remove dependency to Nyx storage
minerva_str_t must be used now and passed directly to minerva_init.
2026-03-27 09:51:46 +01:00
CTCaer c0300b1cee bdk: display: remove dependency to Nyx storage
display_get_verbose_panel_id should now be used to get the full panel id.
2026-03-27 09:51:46 +01:00
CTCaer 1eaa801d6a bdk: bpmp: add write commits
And deduplicate bpmp_clk_rate_relaxed in bpmp_clk_rate_set.
2026-03-27 09:51:46 +01:00
CTCaer 25359b23b9 bdk: clock: add sdmmc1 to the errata affected list 2026-03-27 09:51:46 +01:00
CTCaer db08514ff0 bdk: clock: allow pll lock wait to timeout
Also enable PLLC4 p/f lock and reduce time waiting before disabling.
2026-03-27 09:51:46 +01:00
CTCaer 877e2c7c2e bdk: clock: improve PLLC init
- Use 6 as divm and div1 for OUT1 to avoid having very high frequency on OUT0
 There seems to be an undocumented silicon errata where PLLC OUT0 produces EMI
 to input mux logic in modules, even when not using it.
- Always check if PLL is enabled and disable first in order to avoid a silicon
 errata with hybrid PLLs
- Fix PLLC_FLL_LD_MEM value
2026-03-27 09:51:46 +01:00
CTCaer fa2d7854d3 bdk: clock: streamline sdmmc func naming
Additionally, restored the pclock variable because of _clock_sdmmc_config_clock_host store order.
2026-03-27 09:51:46 +01:00
CTCaer ac0d98ad29 bdk: clock: use SET/CLR registers for all modules
This is not mandatory but removes unnecessary load-mask/or-stores.

On the other hand, due to an undocumented T210 silicon errata,
these are mandatory for SDMMC modules.
This is because a fraction of T210 chips can glitch out and cause SoC hang.
T210B01 is not affected.
2026-03-27 09:51:46 +01:00
CTCaer a365af0492 bdk: bpmp: add binX clock defines 2026-03-27 09:48:54 +01:00
CTCaer 28dce16877 bdk: fuse: add sense function 2026-03-27 09:48:54 +01:00
CTCaer f541f14699 bdk: fuse: add extra info on regs 2026-03-27 09:48:54 +01:00
CTCaer 518cfd401a bdk: fuse: correct masking on array read cmd 2026-03-27 09:48:54 +01:00
CTCaer 44dd00c29a bdk: t210: add mc channel macros 2026-03-27 09:48:54 +01:00
CTCaer 0fa5db1d74 bdk: emc/mc: don't use [io]_rsvd naming for unused regs 2026-03-27 09:48:53 +01:00
CTCaer 76d5cf591f bdk: lvgl: make sure task has a task to call 2026-03-27 09:48:53 +01:00
CTCaer 67157b1867 bdk: ini: switch back to ASCII ordering
For combining multiple inis.
2026-03-27 09:44:07 +01:00
CTCaer af72bb5b94 bdk: dirlist: use flags instead of arguments
A new flag was also added that forces an ASCII ordering instead of Alphabetical one.
2026-03-27 09:44:07 +01:00
CTCaer e19cf3038b bdk: minerva: allow sdmmc la to be skipped on L4T 2026-03-27 09:44:07 +01:00
CTCaer b52f5edce6 bdk: hwinit: refactor MBIST WAR & add description
The biggest take here is that the split approach of having it in Bootrom and
Bootloader is that it's only for boot. Any later powerdown must rerun the WAR
for that particular power domain.
2026-03-27 09:44:07 +01:00
CTCaer 393d135105 bdk: hwinit: fix RAM_SVOP_PDP try no 2
Previously the correct reg name was used but register address was not fixed.
So finally fix it.
2026-03-27 09:44:07 +01:00
CTCaer 6cc3aee389 bdk: storage: small mmc refactoring
- Correct some Response Type names
- And use _def for mmc defines similarly to sd_def
2026-03-27 09:44:07 +01:00
CTCaer 030576ff3f bdk: mc: carveouts are not set by cfg so fix them
For HOS <= 3.0.2 the carveouts are set by bootloader and sdram config actually does not set them.
So add which need different value from reset and also make sure that data is flushed for WPR config.
2026-03-27 09:44:07 +01:00
CTCaer 44e4c0ab21 bdk: make use of new MC/EMC defines 2026-03-27 09:44:07 +01:00
CTCaer f45adfd92f bdk: rework MC/EMC register defines from scratch
And add register structs also.
2026-03-27 09:44:06 +01:00