CTCaer
9d0ed664cb
sdmmc: modernize SD/eMMC cmds
...
Add up to SDA 8.0.0 and eMMC 5.1 and correct some
2026-06-17 06:29:50 +02:00
CTCaer
e69ef9ee0d
sdmmc: identify SD Express cards
2026-06-17 06:27:44 +02:00
CTCaer
de7cf0cf83
sdmmc: add get sda spec version function
...
Returned number is major version.
2026-06-17 06:25:34 +02:00
CTCaer
4626816d40
sdmmc: refactor ICR/OCR defines
...
And others.
Also add some debug prints and move ocr argument to get op cond.
2026-06-17 06:25:29 +02:00
NaGa
1c7792e386
emuSD & other fixes
2026-04-08 17:03:38 +02:00
NaGa
517aa92740
1250 vdd2
2026-04-01 02:35:39 +02:00
NaGa
45318f691f
.
2026-03-28 01:42:43 +01:00
CTCaer
a60510f7de
bdk: mc: add offset to arc aperture
...
And increase it back to 4KB for TSEC only, since the firmware actually checks for it.
2026-03-27 20:44:29 +01:00
CTCaer
1561af252f
bdk: sdmmc: parse bkops info
2026-03-27 20:44:15 +01:00
CTCaer
f6cecdc783
bdk: memory map: define max use from sdram params
2026-03-27 20:44:15 +01:00
CTCaer
387b5b07ed
bdk: sdmmc: rename bkops define
...
And remove dead code.
2026-03-27 20:44:15 +01:00
CTCaer
e7deafd6a1
bdk: smmu: reset heap on disable
...
And rename domain init/deinit
2026-03-27 20:42:31 +01:00
CTCaer
3e6df2459d
bdk: sdram: add missing T210 1GB density timings
2026-03-27 20:42:31 +01:00
CTCaer
7ca071a67c
bdk: lvgl: add creme accent support
2026-03-27 20:42:31 +01:00
CTCaer
07408305f5
bdk: lvgl: correct slider knob signal coordinates
...
It should always point to the middle of the knob and not be variable with offset.
2026-03-27 20:42:31 +01:00
CTCaer
64a5d48ab5
touch: increase max allowed touched area
2026-03-27 20:42:31 +01:00
CTCaer
a02624cd39
bdk: mc: reduce ahb aperture by 4KB
...
The state machine automatically uses TOM + 4KB as real top address.
This can cause issues with HW that accesses that low RAM range,
since once the request enters ARC can't be redirected to MC and can hang.
2026-03-27 20:42:31 +01:00
CTCaer
88ba35b73f
bdk: mc: always enable ahb redirection
2026-03-27 20:42:31 +01:00
CTCaer
f975364a8e
bdk: touch: add clone support
...
From LCD on OLED sku.
2026-03-27 20:42:31 +01:00
CTCaer
72623d5a80
bdk: ini: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
12d970fa64
bdk: pmc: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
9bca3c0253
bdk: kfuse: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
fcbae9d581
bdk: clock: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
a8325f4ec4
bdk: tsec: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
0e49d62bed
bdk: se: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
1101db8f19
bdk: power: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
45446486f2
bdk: dram: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
10fceea4be
bdk: touch: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
f26e9f0504
bdk: i2c: homogenize return values
2026-03-27 20:16:31 +01:00
CTCaer
58064bda34
bdk: vic: expose idle wait
2026-03-27 20:08:45 +01:00
CTCaer
1319984285
bdk: touch: check event count for wait event
...
And increase checks during autotune execution.
2026-03-27 20:08:45 +01:00
CTCaer
8881faa91b
bdk: touch: simplify input reporting
...
Additionally, touch polling now returns 1 for no event result.
2026-03-27 20:08:45 +01:00
CTCaer
0e64b9384f
bdk: touch: switch to custom chip info cmd
...
And also check if chip id is correct on init.
2026-03-27 20:08:45 +01:00
CTCaer
e3fba92e00
bdk: touch: use packet i2c for all transfers
...
The repeating byte doesn't exist in i2c packet mode.
Additionally, adjust split transfers to one.
2026-03-27 20:08:45 +01:00
CTCaer
2a7e148011
bdk: touch: refactor
...
And also use packet mode for big tx/rx combo i2c trasnfers.
2026-03-27 20:08:45 +01:00
CTCaer
476c070cf4
bdk: i2c: optimize packet mode functions
...
- Allow xfer packet to send up to 20 bytes before receiving
- Remove interrupt use since it's only polling
- Check proper status for TX finish.
2026-03-27 20:08:45 +01:00
CTCaer
8f6dce1368
bdk: i2c: refactor
2026-03-27 20:08:45 +01:00
CTCaer
10c2d3d379
bdk: clk: add missing macro
2026-03-27 20:08:45 +01:00
CTCaer
e2ff75291b
bdk: touch: refactor/improve
...
- Remove useless poll wait
- Use more defines
- Deduplicate code
- Add more checks
- Add switch sense mode
2026-03-27 20:08:45 +01:00
CTCaer
45a08c058f
bdk: clk: reduce i2c freq input to save power
2026-03-27 20:08:45 +01:00
CTCaer
7a37ddc45e
bdk: vic: add hw version that this driver aims for
...
Also TRM lies about best cache width, like always.
The higher the faster. The lower the simpler alignment.
A balanced one is used by default.
2026-03-27 20:08:45 +01:00
CTCaer
de3a74d351
bdk: bm92t: do not parse non fixed pdos
2026-03-27 20:08:45 +01:00
CTCaer
eb62a31a1a
bdk: sdmmc: remove dependency to ram for init
2026-03-27 20:08:45 +01:00
CTCaer
bf5372628a
bdk: mem: rename sdmmc dma buffer
2026-03-27 20:05:57 +01:00
CTCaer
aba56fd173
bdk: move exception type base away from IRQ stack
...
Allow a more heavy stack usage by IRQ handlers.
2026-03-27 20:05:57 +01:00
CTCaer
618e3007b5
bdk: lvgl: complete black theme
...
This has the side-effect to make any theme color component from 0x0B to 0xC7 work.
2026-03-27 19:38:45 +01:00
CTCaer
378d38b850
bdk: add missing header guards
2026-03-27 19:38:45 +01:00
CTCaer
f155346238
bdk: ianos: restructure for future expansion
2026-03-27 19:38:08 +01:00
CTCaer
b3c95990ed
bdk: pmc: refactor register defines and structs
2026-03-27 19:36:58 +01:00
CTCaer
b86701823c
bdk: pinmux: always detach I2C4 pins from I2C3 pm
...
Generally I2C3 communication can work via I2C3 or I2C4 pins.
Defaults are fine as long as one of the pin groups are floating or grounded or
both share I2C traces.
In NX boards I2C4 SDA is used for GC and connected to 1V8.
So if a GC is slotted, I2C3 works, if not, no communication is possible.
This config was done previously inside I2C3 consumer driver (touchscreen).
Now it's moved inside pinmux_config_i2c.
2026-03-27 19:36:58 +01:00
CTCaer