Files
OmniNX-Installer-Payload/bdk/thermal/fan.c
T
niklascfw 1b4a81239b Update BDK to hekate v6.5.5
Replaces the old vendored BDK with the one from hekate v6.5.5 (CTCaer's
2025/2026 refactors: sdmmc, SE, minerva v1.6, display, heap, return
value homogenisation). OmniNX additions re-applied on top:
bq24193_charger_connected() and jc_clear_input(); s_vprintf now ships
with the BDK.

Ported to the new API:
- sd_mount(), sdmmc_storage_* and ini_parse() now return 0 on success.
  The installer checked ini_parse() != 1, which would have made it miss
  manifest.ini and run every install as a clean install.
- SD helpers come from bdk/storage/sd.c (source/nx_sd.* removed),
  ffsystem.c from the BDK, diskio.c/ffconf.h from hekate (ffconf keeps
  the sd:/ volume prefix).
- minerva_init() needs the minerva storage; the installer still drops
  to 800 MHz afterwards.
- Payload launch follows hekate (sd_file_read, hw_deinit); coreboot
  path removed upstream.
- Stack moved to 0x96000000: the old 0x83100000 is inside the new heap.
- GUI/USB/compression parts of the BDK are not built.
2026-11-12 23:17:18 +01:00

129 lines
3.1 KiB
C

/*
* Fan driver for Nintendo Switch
*
* Copyright (c) 2018-2024 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <thermal/fan.h>
#include <power/regulator_5v.h>
#include <soc/bpmp.h>
#include <soc/clock.h>
#include <soc/fuse.h>
#include <soc/gpio.h>
#include <soc/hw_init.h>
#include <soc/pinmux.h>
#include <soc/timer.h>
#include <soc/t210.h>
void fan_set_duty(u32 duty)
{
static bool fan_init = false;
static u16 curr_duty = -1;
if (duty > 236)
duty = 236;
if (curr_duty == duty)
return;
curr_duty = duty;
if (!fan_init)
{
// Fan tachometer.
u32 pull_resistor = hw_get_chip_id() == GP_HIDREV_MAJOR_T210 ? PINMUX_PULL_UP : 0;
PINMUX_AUX(PINMUX_AUX_CAM1_PWDN) = PINMUX_TRISTATE | PINMUX_INPUT_ENABLE | pull_resistor | 1;
gpio_direction_input(GPIO_PORT_S, GPIO_PIN_7);
// Enable PWM if disabled.
if (fuse_read_hw_type() == FUSE_NX_HW_TYPE_AULA)
clock_enable_pwm();
PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (0x100 << 16); // Max PWM to disable fan.
PINMUX_AUX(PINMUX_AUX_LCD_GPIO2) = 1; // Set source to PWM1.
gpio_config(GPIO_PORT_V, GPIO_PIN_4, GPIO_MODE_SPIO); // Fan power mode.
fan_init = true;
}
// Inverted polarity.
u32 inv_duty = 236 - duty;
// If disabled send a 0 duty.
if (inv_duty == 236)
{
PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (0x100 << 16); // Bit 24 is absolute 0%.
regulator_5v_disable(REGULATOR_5V_FAN);
// Disable fan.
PINMUX_AUX(PINMUX_AUX_LCD_GPIO2) = PINMUX_INPUT_ENABLE | PINMUX_PARKED |
PINMUX_TRISTATE | PINMUX_PULL_DOWN; // Set source to PWM1.
}
else // Set PWM duty.
{
// Fan power supply.
regulator_5v_enable(REGULATOR_5V_FAN);
PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (inv_duty << 16);
// Enable fan.
PINMUX_AUX(PINMUX_AUX_LCD_GPIO2) = 1; // Set source to PWM1.
}
}
void fan_get_speed(u32 *duty, u32 *rpm)
{
if (rpm)
{
u32 irq_count = 0;
bool should_read = true;
// Poll irqs for 2 seconds. (5 seconds for accurate count).
int timer = get_tmr_us() + 2000000;
while ((timer - get_tmr_us()) > 0)
{
bool irq_val = gpio_read(GPIO_PORT_S, GPIO_PIN_7);
if (irq_val && should_read)
{
irq_count++;
should_read = false;
}
else if (!irq_val)
should_read = true;
}
// Halve the irq count.
irq_count /= 2;
// Calculate rpm based on triggered interrupts.
*rpm = irq_count * (60 / 2);
}
if (duty)
*duty = 236 - ((PWM(PWM_CONTROLLER_PWM_CSR_1) >> 16) & 0xFF);
}
void fan_set_from_temp(u32 temp)
{
if (temp >= 52)
fan_set_duty(102);
else if (temp >= 47)
fan_set_duty(76);
else if (temp >= 42)
fan_set_duty(51);
else if (temp <= 39)
fan_set_duty(0);
}