Install: Hekate 8GB after copy (fuse >4GiB), dram_fuse helper, RAM test target

- Add dram_fuse.c/h for shared fuse-to-MiB mapping
- After successful update/clean install copy: if hekate_8gb.bin exists and
  fuse reports more than 4 GiB, copy to sd:/payload.bin and
  sd:/bootloader/update.bin, then remove source; otherwise remove helper only
- Makefile: make ram-test builds output/RAM-Test.bin (tools/ram_test_main.c)

Made-with: Cursor

tools/ram_test_main.c

@@ -0,0 +1,70 @@
+/*
+ * Minimal RAM info test payload (fuse DRAM ID + SK table -> MiB).
+ * Build: make ram-test  ->  output/RAM-Test.bin
+ */
+
+#include <display/di.h>
+#include <mem/heap.h>
+#include <mem/minerva.h>
+#include <memory_map.h>
+#include <soc/bpmp.h>
+#include <soc/fuse.h>
+#include <soc/hw_init.h>
+#include <soc/t210.h>
+#include <utils/util.h>
+
+#include "dram_fuse.h"
+#include "gfx.h"
+
+#undef COLOR_CYAN
+#undef COLOR_WHITE
+#define COLOR_CYAN   0xFF00FFFF
+#define COLOR_WHITE  0xFFFFFFFF
+
+/* Required by BDK */
+boot_cfg_t __attribute__((section("._boot_cfg"))) b_cfg;
+volatile nyx_storage_t *nyx_str = (nyx_storage_t *)NYX_STORAGE_ADDR;
+
+extern void pivot_stack(u32 stack_top);
+
+void ipl_main(void)
+{
+	hw_init();
+	pivot_stack(IPL_STACK_TOP);
+	heap_init(IPL_HEAP_START);
+
+	minerva_init();
+	minerva_change_freq(FREQ_800);
+
+	display_init();
+	u32 *fb = display_init_framebuffer_pitch();
+	gfx_init_ctxt(fb, 720, 1280, 720);
+	gfx_con_init();
+	display_backlight_pwm_init();
+	display_backlight_brightness(100, 1000);
+
+	bpmp_clk_rate_set(BPMP_CLK_DEFAULT_BOOST);
+
+	gfx_clear_grey(0x1B);
+	gfx_con_setpos(0, 0);
+	gfx_con_setcol(COLOR_CYAN, gfx_con.fillbg, gfx_con.bgcol);
+	gfx_printf("RAM test payload\n\n");
+	gfx_con_setcol(COLOR_WHITE, gfx_con.fillbg, gfx_con.bgcol);
+
+	u32 raw = fuse_read_dramid(true);
+	u32 nid = fuse_read_dramid(false);
+	u32 chip = hw_get_chip_id();
+	int mib = dram_capacity_mib_from_fuse();
+
+	gfx_printf("SoC:       %s\n", chip == GP_HIDREV_MAJOR_T210B01 ? "Mariko (T210B01)" : "Erista (T210)");
+	gfx_printf("DRAM fuse: raw %d  norm %d\n", raw, nid);
+	if (mib > 0)
+		gfx_printf("Table MiB: %d (fuse SKU, not probe)\n", mib);
+	else
+		gfx_printf("Table MiB: (unknown id for this SoC)\n");
+
+	gfx_printf("\nHang — power off or inject payload.\n");
+
+	while (1)
+		msleep(500);
+}