diff --git a/Source/hoc-clk/build.sh b/Source/hoc-clk/build.sh old mode 100644 new mode 100755 index a6398b0f..9bac30d8 --- a/Source/hoc-clk/build.sh +++ b/Source/hoc-clk/build.sh @@ -11,7 +11,7 @@ fi echo echo "*** Compiling hoc-clk ***" -TITLE_ID="$(grep -oP '"title_id":\s*"0x\K(\w+)' "$ROOT_DIR/sysmodule/perms.json")" +TITLE_ID="$(sed -n 's/.*"title_id"[[:space:]]*:[[:space:]]*"0x\([^"]*\)".*/\1/p' "$ROOT_DIR/sysmodule/perms.json")" pushd "$ROOT_DIR/sysmodule" make -j$CORES diff --git a/build.sh b/build.sh old mode 100644 new mode 100755 index c00e1311..c1ec4bca --- a/build.sh +++ b/build.sh @@ -45,11 +45,13 @@ cp -v build/exosphere/out/nintendo_nx_arm64_armv8a/release/exosphere.bin dist/at cd Source/hoc-clk/ ./build.sh -cp -r dist/ ../../ +mkdir -p ../../dist +cp -r dist/. ../../dist/ cd ../../ echo "*** Compiling horizon-oc-monitor ***" cd Source/Horizon-OC-Monitor/ make -j$CORES +mkdir -p ../../dist/switch/.overlays cp -v Horizon-OC-Monitor.ovl ../../dist/switch/.overlays/Horizon-OC-Monitor.ovl diff --git a/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp b/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp index 22188966..9de57192 100644 Binary files a/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp and b/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp differ diff --git a/dist/atmosphere/exosphere.bin b/dist/atmosphere/exosphere.bin old mode 100644 new mode 100755 diff --git a/dist/atmosphere/kips/hoc.kip b/dist/atmosphere/kips/hoc.kip index 3c84a553..8c85f0e6 100644 Binary files a/dist/atmosphere/kips/hoc.kip and b/dist/atmosphere/kips/hoc.kip differ diff --git a/dist/config/horizon-oc/lang/es.json b/dist/config/horizon-oc/lang/es.json index 546b4429..a938c1e3 100644 --- a/dist/config/horizon-oc/lang/es.json +++ b/dist/config/horizon-oc/lang/es.json @@ -2,140 +2,140 @@ "Information": "Información", "IDDQ:": "IDDQ:", "Module: ": "Módulo:", - "sys-dock status:": "estado del sys-dock:", + "sys-dock status:": "Estado de sys-dock:", "SaltyNX status:": "Estado de SaltyNX:", - "RR Display status:": "Estado de visualización RR:", - "Wafer Position:": "Posición de la oblea:", + "RR Display status:": "Estado de pantalla RR:", + "Wafer Position:": "Posición del wafer:", "Credits": "Créditos", "Developers": "Desarrolladores", "Contributors": "Colaboradores", - "Testers": "Probadores", - "Special Thanks": "agradecimiento especial", + "Testers": "Testers", + "Special Thanks": "Agradecimientos especiales", "Unknown": "Desconocido", "Installed": "Instalado", "Not Installed": "No instalado", "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "LA LICENCIA DE CERVEZA", + "THE BEER-WARE LICENSE": "LICENCIA BEER-WARE", "Default": "Predeterminado", - "Do Not Override": "No anular", - "Disabled": "Discapacitado", - "Enabled": "Habilitado", + "Do Not Override": "No sobrescribir", + "Disabled": "Desactivado", + "Enabled": "Activado", " \\ue0e3 Reset": "\\ue0e3 Restablecer", "Display": "Pantalla", - "Application changed\\n\\n": "Aplicación modificada\\n\\n", - "The running application changed\\n\\n": "La aplicación en ejecución cambió\\n\\n", - "while editing was going on.": "mientras se realizaba la edición.", - "Board": "tablero", + "Application changed\\n\\n": "Aplicación cambiada\\n\\n", + "The running application changed\\n\\n": "La aplicación en ejecución ha cambiado\\n\\n", + "while editing was going on.": "mientras se estaba editando.", + "Board": "Placa", "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al módulo del sistema hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Por favor asegúrese de que todo esté\\n\\n", - "correctly installed and enabled.": "correctamente instalado y habilitado.", - "Fatal error": "error fatal", - "Temporary Overrides ": "Anulaciones temporales", - "Sleep Mode": "Modo de suspensión", - "Stock": "Valores", - "Dev OC": "Desarrollador OC", - "Boost Mode": "Modo de impulso", + "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al sysmodule hoc-clk.\\n\\n", + "Please make sure everything is\\n\\n": "Asegúrate de que todo esté\\n\\n", + "correctly installed and enabled.": "correctamente instalado y activado.", + "Fatal error": "Error fatal", + "Temporary Overrides ": "Ajustes temporales", + "Sleep Mode": "Modo reposo", + "Stock": "Valores de fábrica", + "Dev OC": "OC de desarrollo", + "Boost Mode": "Modo boost", "Safe Max": "Máximo seguro", - "Unsafe Max": "Máximo inseguro", + "Unsafe Max": "Máximo no seguro", "Absolute Max": "Máximo absoluto", - "Handheld Safe Max": "Caja fuerte de mano máx.", - "Enable": "Habilitar", + "Handheld Safe Max": "Máximo seguro en portátil", + "Enable": "Activar", "Edit App Profile": "Editar perfil de aplicación", "Edit Global Profile": "Editar perfil global", - "Temporary Overrides": "Anulaciones temporales", + "Temporary Overrides": "Ajustes temporales", "Settings": "Configuración", "About": "Acerca de", - "Compiling with minimal features": "Compilando con características mínimas", - "General Settings": "Configuraciones generales", - "Governor Settings": "Configuración del gobernador", - "Safety Settings": "Configuraciones de seguridad", - "Save KIP Settings": "Guardar configuración de KIP", + "Compiling with minimal features": "Compilado con funciones mínimas", + "General Settings": "Configuración general", + "Governor Settings": "Configuración del governor", + "Safety Settings": "Configuración de seguridad", + "Save KIP Settings": "Guardar configuración KIP", "RAM Settings": "Configuración de RAM", - "CPU Settings": "Configuración de la CPU", + "CPU Settings": "Configuración de CPU", "GPU Settings": "Configuración de GPU", "Display Settings": "Configuración de pantalla", "Experimental": "Experimental", - "GPU Scheduling Override Method": "Método de anulación de programación de GPU", - "can be dangerous and may cause": "puede ser peligroso y puede causar", - "damage to your battery or charger!": "¡Daños a su batería o cargador!", - "Charge Current Override": "Anulación de corriente de carga", + "GPU Scheduling Override Method": "Método de sobrescritura del scheduling de GPU", + "can be dangerous and may cause": "puede ser peligroso y causar", + "damage to your battery or charger!": "daños a la batería o al cargador.", + "Charge Current Override": "Sobrescritura de corriente de carga", "RAM Voltage Display Mode": "Modo de visualización de voltaje de RAM", "Polling Interval": "Intervalo de sondeo", - "CPU Governor Minimum Frequency": "Frecuencia mínima del gobernador de CPU", - "refresh rates may cause stress": "Las frecuencias de actualización pueden causar estrés.", - "or damage to your display! ": "o daños a su pantalla!", - "Proceed at your own risk!": "¡Continúe bajo su propio riesgo!", - "Max Handheld Display": "Pantalla portátil máxima", - "Display Clock": "Reloj de pantalla", - "Official Rating": "Calificación oficial", + "CPU Governor Minimum Frequency": "Frecuencia mínima del governor de CPU", + "refresh rates may cause stress": "las tasas de refresco pueden causar estrés", + "or damage to your display! ": "o dañar la pantalla.", + "Proceed at your own risk!": "¡Úsalo bajo tu propio riesgo!", + "Max Handheld Display": "Frecuencia máxima de pantalla en portátil", + "Display Clock": "Frecuencia de pantalla", + "Official Rating": "Valor oficial", "TDP Threshold": "Umbral de TDP", - "Power": "poder", - "Thermal Throttle Limit": "Límite del acelerador térmico", - "HP Mode": "Modo HP", + "Power": "Potencia", + "Thermal Throttle Limit": "Límite de thermal throttling", + "HP Mode": "Modo alto rendimiento", "Default (Mariko)": "Predeterminado (Mariko)", "Default (Erista)": "Predeterminado (Erista)", - "Rating": "Calificación", - "Safe Max (Mariko)": "Max seguro (Mariko)", - "Safe Max (Erista)": "Safe Max (Erista)", - "RAM VDD2 Voltage": "Voltaje RAM VDD2", - "Voltage": "voltaje", - "RAM VDDQ Voltage": "Voltaje RAM VDDQ", - "RAM Frequency Editor": "Editor de frecuencia RAM", - "JEDEC.": "JEDEC.", - "High speedo needed!": "¡Se necesita alta velocidad!", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Necesita Speedo/PLL extremo)", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Necesita Speedo/PLL extremo)", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Necesita Speedo/PLL extremo)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Necesita Speedo/PLL ridículo)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Necesita Speedo/PLL ridículo)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Necesita Speedo/PLL ridículo)", - "Ram Max Clock": "Ram Max Reloj", - "RAM Latency Editor": "Editor de latencia de RAM", - "RAM Timing Reductions": "Reducciones de tiempo de RAM", - "Memory Timings": "Tiempos de memoria", + "Rating": "Valor", + "Safe Max (Mariko)": "Máximo seguro (Mariko)", + "Safe Max (Erista)": "Máximo seguro (Erista)", + "RAM VDD2 Voltage": "Voltaje VDD2 de RAM", + "Voltage": "Voltaje", + "RAM VDDQ Voltage": "Voltaje VDDQ de RAM", + "RAM Frequency Editor": "Editor de frecuencia de RAM", + "JEDEC.": "JEDEC", + "High speedo needed!": "¡Se necesita alto speedo!", + "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (requiere Speedo/PLL extremo)", + "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (requiere Speedo/PLL extremo)", + "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (requiere Speedo/PLL extremo)", + "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (requiere Speedo/PLL muy alto)", + "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (requiere Speedo/PLL muy alto)", + "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (requiere Speedo/PLL muy alto)", + "Ram Max Clock": "Frecuencia máxima de RAM", + "RAM Latency Editor": "Editor de latencias de RAM", + "RAM Timing Reductions": "Reducción de timings de RAM", + "Memory Timings": "Timings de memoria", "Advanced": "Avanzado", - "t6 tRTW Fine Tune": "t6 tRTW Ajuste fino", + "t6 tRTW Fine Tune": "Ajuste fino t6 tRTW", "tRTW Fine Tune": "Ajuste fino tRTW", - "t7 tWTR Fine Tune": "t7 tWTR Ajuste fino", - "tWTR Fine Tune": "Ajuste fino de tWTR", - "Memory Latencies": "Latencias de la memoria", - "Read Latency": "Leer latencia", + "t7 tWTR Fine Tune": "Ajuste fino t7 tWTR", + "tWTR Fine Tune": "Ajuste fino tWTR", + "Memory Latencies": "Latencias de memoria", + "Read Latency": "Latencia de lectura", "Write Latency": "Latencia de escritura", - "CPU Boost Clock": "Reloj de aumento de CPU", - "CPU UV": "procesador ultravioleta", + "CPU Boost Clock": "Frecuencia boost de CPU", + "CPU UV": "Undervolt de CPU", "CPU Unlock": "Desbloqueo de CPU", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "Voltaje máximo de la CPU", - "CPU Max Clock": "Reloj máximo de CPU", - "Extreme UV Table": "Mesa UV extrema", - "CPU UV Table": "Tabla UV de CPU", - "CPU Low UV": "CPU baja radiación ultravioleta", - "CPU High UV": "CPU alta UV", + "CPU VMIN": "VMIN de CPU", + "CPU Max Voltage": "Voltaje máximo de CPU", + "CPU Max Clock": "Frecuencia máxima de CPU", + "Extreme UV Table": "Tabla de undervolt extrema", + "CPU UV Table": "Tabla de undervolt de CPU", + "CPU Low UV": "Undervolt bajo de CPU", + "CPU High UV": "Undervolt alto de CPU", "CPU Low VMIN": "VMIN bajo de CPU", "CPU High VMIN": "VMIN alto de CPU", - "No Undervolt": "Sin subvoltaje", - "SLT Table": "Mesa TR", + "No Undervolt": "Sin undervolt", + "SLT Table": "Tabla SLT", "HiOPT Table": "Tabla HiOPT", - "GPU Undervolt Table": "Tabla de subvoltaje de GPU", + "GPU Undervolt Table": "Tabla de undervolt de GPU", "GPU Minimum Voltage": "Voltaje mínimo de GPU", - "Calculate GPU Vmin": "Calcular GPU Vmin", - "GPU VMIN": "GPU VMIN", + "Calculate GPU Vmin": "Calcular Vmin de GPU", + "GPU VMIN": "VMIN de GPU", "GPU Maximum Voltage": "Voltaje máximo de GPU", - "GPU Voltage Offset": "Compensación de voltaje de GPU", - "Do not override": "no anular", - "Enabled (Default)": "Habilitado (predeterminado)", - "96.6% limit": "límite del 96,6%", - "99.7% limit": "límite del 99,7%", - "GPU Scheduling Override": "Anulación de programación de GPU", - "Official Service": "Servicio Oficial", - "GPU DVFS Mode": "Modo GPU DVFS", - "GPU DVFS Offset": "Compensación DVFS de GPU", + "GPU Voltage Offset": "Offset de voltaje de GPU", + "Do not override": "No sobrescribir", + "Enabled (Default)": "Activado (predeterminado)", + "96.6% limit": "Límite 96,6%", + "99.7% limit": "Límite 99,7%", + "GPU Scheduling Override": "Sobrescritura de scheduling de GPU", + "Official Service": "Servicio oficial", + "GPU DVFS Mode": "Modo DVFS de GPU", + "GPU DVFS Offset": "Offset DVFS de GPU", "GPU Voltage Table": "Tabla de voltaje de GPU", "GPU Custom Table (mV)": "Tabla personalizada de GPU (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075MHz sin UV, 1152MHz en SLT", - "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar", - "permanent damage to your Switch!": "¡Daño permanente a tu Switch!", - "921MHz without UV and 960MHz on": "921MHz sin UV y 960MHz encendido", - "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar" -} + "1075MHz without UV, 1152MHz on SLT": "1075MHz sin undervolt, 1152MHz en SLT", + "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar ", + "permanent damage to your Switch!": "¡daño permanente a tu Switch!", + "921MHz without UV and 960MHz on": "921MHz sin undervolt y 960MHz en", + "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar " +} \ No newline at end of file diff --git a/dist/config/horizon-oc/lang/fr.json b/dist/config/horizon-oc/lang/fr.json index 2494473a..e4e41177 100644 --- a/dist/config/horizon-oc/lang/fr.json +++ b/dist/config/horizon-oc/lang/fr.json @@ -1,11 +1,11 @@ { "Information": "Informations", - "IDDQ:": "IDDQ :", - "Module: ": "Module :", - "sys-dock status:": "état du dock système :", - "SaltyNX status:": "Statut SaltyNX :", - "RR Display status:": "Etat d'affichage RR :", - "Wafer Position:": "Position de la plaquette :", + "IDDQ:": "IDDQ :", + "Module: ": "Module :", + "sys-dock status:": "Statut de sys-dock :", + "SaltyNX status:": "Statut de SaltyNX :", + "RR Display status:": "Statut de l'affichage RR :", + "Wafer Position:": "Position du wafer :", "Credits": "Crédits", "Developers": "Développeurs", "Contributors": "Contributeurs", @@ -15,127 +15,127 @@ "Installed": "Installé", "Not Installed": "Non installé", "X: %u Y: %u": "X : %u Y : %u", - "THE BEER-WARE LICENSE": "LA LICENCE DE LA BIÈRE", + "THE BEER-WARE LICENSE": "LA LICENCE BEER-WARE", "Default": "Par défaut", "Do Not Override": "Ne pas remplacer", "Disabled": "Désactivé", "Enabled": "Activé", " \\ue0e3 Reset": "\\ue0e3 Réinitialiser", - "Display": "Affichage", + "Display": "Écran", "Application changed\\n\\n": "Application modifiée\\n\\n", "The running application changed\\n\\n": "L'application en cours d'exécution a changé\\n\\n", - "while editing was going on.": "pendant le montage.", - "Board": "Conseil", + "while editing was going on.": "pendant la modification.", + "Board": "Carte", "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au module système hoc-clk.\\n\\n", + "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au sysmodule hoc-clk.\\n\\n", "Please make sure everything is\\n\\n": "Veuillez vous assurer que tout est\\n\\n", "correctly installed and enabled.": "correctement installé et activé.", "Fatal error": "Erreur fatale", - "Temporary Overrides ": "Remplacements temporaires", + "Temporary Overrides ": "Forçages temporaires ", "Sleep Mode": "Mode veille", - "Stock": "Actions", - "Dev OC": "Développeur OC", + "Stock": "D'origine", + "Dev OC": "OC Développeur", "Boost Mode": "Mode Boost", - "Safe Max": "Coffre-fort maximum", - "Unsafe Max": "Dangereux Max", + "Safe Max": "Max sûr", + "Unsafe Max": "Max non sûr", "Absolute Max": "Max absolu", - "Handheld Safe Max": "Coffre-fort portatif Max", + "Handheld Safe Max": "Max sûr (mode portable)", "Enable": "Activer", - "Edit App Profile": "Modifier le profil de l'application", + "Edit App Profile": "Modifier le profil de l'app", "Edit Global Profile": "Modifier le profil global", - "Temporary Overrides": "Remplacements temporaires", + "Temporary Overrides": "Forçages temporaires", "Settings": "Paramètres", "About": "À propos", - "Compiling with minimal features": "Compilation avec des fonctionnalités minimales", + "Compiling with minimal features": "Compilation avec fonctionnalités minimales", "General Settings": "Paramètres généraux", "Governor Settings": "Paramètres du gouverneur", "Safety Settings": "Paramètres de sécurité", "Save KIP Settings": "Enregistrer les paramètres KIP", - "RAM Settings": "Paramètres de la RAM", - "CPU Settings": "Paramètres du processeur", - "GPU Settings": "Paramètres du processeur graphique", + "RAM Settings": "Paramètres RAM", + "CPU Settings": "Paramètres CPU", + "GPU Settings": "Paramètres GPU", "Display Settings": "Paramètres d'affichage", "Experimental": "Expérimental", - "GPU Scheduling Override Method": "Méthode de remplacement de la planification GPU", - "can be dangerous and may cause": "peut être dangereux et provoquer", - "damage to your battery or charger!": "dommages à votre batterie ou à votre chargeur !", - "Charge Current Override": "Remplacement du courant de charge", - "RAM Voltage Display Mode": "Mode d'affichage de la tension de la RAM", + "GPU Scheduling Override Method": "Méthode de Forçage de l'ordonnancement GPU", + "can be dangerous and may cause": "peut être dangereux et causer des", + "damage to your battery or charger!": "dommages à votre batterie ou chargeur !", + "Charge Current Override": "Forçage du courant de charge", + "RAM Voltage Display Mode": "Mode d'affichage de la tension RAM", "Polling Interval": "Intervalle d'interrogation", - "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur du processeur", - "refresh rates may cause stress": "les taux de rafraîchissement peuvent causer du stress", - "or damage to your display! ": "ou endommager votre écran !", - "Proceed at your own risk!": "Procédez à vos propres risques !", - "Max Handheld Display": "Affichage portable maximum", - "Display Clock": "Affichage de l'horloge", + "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur CPU", + "refresh rates may cause stress": "les taux de rafraîchissement peuvent stresser", + "or damage to your display! ": "ou endommager votre écran !", + "Proceed at your own risk!": "À utiliser à vos propres risques !", + "Max Handheld Display": "Affichage portable max", + "Display Clock": "Fréquence d'affichage", "Official Rating": "Classement officiel", "TDP Threshold": "Seuil TDP", - "Power": "Puissance", - "Thermal Throttle Limit": "Limite d'accélérateur thermique", + "Power": "Alimentation", + "Thermal Throttle Limit": "Limite d'étranglement thermique", "HP Mode": "Mode HP", "Default (Mariko)": "Par défaut (Mariko)", "Default (Erista)": "Par défaut (Erista)", - "Rating": "Note", - "Safe Max (Mariko)": "Coffre-fort Max (Mariko)", - "Safe Max (Erista)": "Coffre-fort Max (Erista)", - "RAM VDD2 Voltage": "Tension de la RAM VDD2", + "Rating": "Évaluation", + "Safe Max (Mariko)": "Max sûr (Mariko)", + "Safe Max (Erista)": "Max sûr (Erista)", + "RAM VDD2 Voltage": "Tension RAM VDD2", "Voltage": "Tension", - "RAM VDDQ Voltage": "Tension VDDQ de la RAM", + "RAM VDDQ Voltage": "Tension RAM VDDQ", "RAM Frequency Editor": "Éditeur de fréquence RAM", "JEDEC.": "JEDEC.", - "High speedo needed!": "Besoin d'un speedo haut !", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite un Speedo/PLL extrême)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite un Speedo/PLL extrême)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite un Speedo/PLL extrême)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite un Speedo/PLL ridicule)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite un Speedo/PLL ridicule)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite un Speedo/PLL ridicule)", - "Ram Max Clock": "Ram Max Horloge", + "High speedo needed!": "Speedo élevé requis !", + "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite Speedo/PLL extrême)", + "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite Speedo/PLL extrême)", + "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite Speedo/PLL extrême)", + "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite Speedo/PLL ridicule)", + "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite Speedo/PLL ridicule)", + "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite Speedo/PLL ridicule)", + "Ram Max Clock": "Fréquence RAM max", "RAM Latency Editor": "Éditeur de latence RAM", - "RAM Timing Reductions": "Réductions de synchronisation de la RAM", - "Memory Timings": "Horaires de mémoire", + "RAM Timing Reductions": "Réductions des timings RAM", + "Memory Timings": "Timings mémoire", "Advanced": "Avancé", - "t6 tRTW Fine Tune": "t6 tRTW réglage fin", - "tRTW Fine Tune": "tRTW Réglage fin", - "t7 tWTR Fine Tune": "t7 tWTR réglage fin", - "tWTR Fine Tune": "Réglage fin du tWTR", - "Memory Latencies": "Latences de mémoire", + "t6 tRTW Fine Tune": "Ajustement précis t6 tRTW", + "tRTW Fine Tune": "Ajustement précis tRTW", + "t7 tWTR Fine Tune": "Ajustement précis t7 tWTR", + "tWTR Fine Tune": "Ajustement précis tWTR", + "Memory Latencies": "Latences mémoire", "Read Latency": "Latence de lecture", "Write Latency": "Latence d'écriture", - "CPU Boost Clock": "Horloge d'augmentation du processeur", - "CPU UV": "UV du processeur", - "CPU Unlock": "Déverrouillage du processeur", + "CPU Boost Clock": "Fréquence Boost CPU", + "CPU UV": "UV CPU", + "CPU Unlock": "Déverrouillage CPU", "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "Tension maximale du processeur", - "CPU Max Clock": "Horloge maximale du processeur", - "Extreme UV Table": "Table UV Extrême", - "CPU UV Table": "Tableau UV du processeur", - "CPU Low UV": "CPU faible UV", - "CPU High UV": "CPU UV élevé", - "CPU Low VMIN": "CPU faible VMIN", - "CPU High VMIN": "Processeur VMIN élevé", - "No Undervolt": "Pas de sous-tension", - "SLT Table": "Tableau SLT", - "HiOPT Table": "Tableau HiOPT", - "GPU Undervolt Table": "Tableau de sous-tension GPU", - "GPU Minimum Voltage": "Tension minimale du GPU", - "Calculate GPU Vmin": "Calculer la Vmin du GPU", + "CPU Max Voltage": "Tension CPU max", + "CPU Max Clock": "Fréquence CPU max", + "Extreme UV Table": "Table d'UV extrême", + "CPU UV Table": "Table d'UV CPU", + "CPU Low UV": "UV CPU faible", + "CPU High UV": "UV CPU élevé", + "CPU Low VMIN": "VMIN CPU faible", + "CPU High VMIN": "VMIN CPU élevé", + "No Undervolt": "Aucun Undervolt", + "SLT Table": "Table SLT", + "HiOPT Table": "Table HiOPT", + "GPU Undervolt Table": "Table d'undervolt GPU", + "GPU Minimum Voltage": "Tension GPU minimale", + "Calculate GPU Vmin": "Calculer Vmin GPU", "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "Tension maximale du GPU", - "GPU Voltage Offset": "Décalage de tension du GPU", - "Do not override": "Ne remplacez pas", + "GPU Maximum Voltage": "Tension GPU maximale", + "GPU Voltage Offset": "Offset de tension GPU", + "Do not override": "Ne pas remplacer", "Enabled (Default)": "Activé (par défaut)", - "96.6% limit": "Limite de 96,6 %", - "99.7% limit": "Limite de 99,7 %", - "GPU Scheduling Override": "Remplacement de la planification GPU", + "96.6% limit": "Limite de 96,6 %", + "99.7% limit": "Limite de 99,7 %", + "GPU Scheduling Override": "Forçage de l'ordonnancement GPU", "Official Service": "Service officiel", "GPU DVFS Mode": "Mode GPU DVFS", - "GPU DVFS Offset": "Décalage GPU DVFS", - "GPU Voltage Table": "Tableau de tension du GPU", - "GPU Custom Table (mV)": "Tableau personnalisé GPU (mV)", + "GPU DVFS Offset": "Offset GPU DVFS", + "GPU Voltage Table": "Table de tension GPU", + "GPU Custom Table (mV)": "Table de GPU personnalisée (mV)", "1075MHz without UV, 1152MHz on SLT": "1075 MHz sans UV, 1152 MHz sur SLT", - "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut provoquer", - "permanent damage to your Switch!": "dommages permanents à votre Switch !", - "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz activé", - "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent provoquer" + "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut causer des", + "permanent damage to your Switch!": "dommages permanents à votre Switch !", + "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz sur", + "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent causer des" } diff --git a/dist/config/horizon-oc/lang/it.json b/dist/config/horizon-oc/lang/it.json index d7056f36..5e65fdae 100644 --- a/dist/config/horizon-oc/lang/it.json +++ b/dist/config/horizon-oc/lang/it.json @@ -2,140 +2,140 @@ "Information": "Informazioni", "IDDQ:": "IDDQ:", "Module: ": "Modulo:", - "sys-dock status:": "stato del dock di sistema:", + "sys-dock status:": "stato di sys-dock", "SaltyNX status:": "Stato di SaltyNX:", - "RR Display status:": "Stato di visualizzazione RR:", - "Wafer Position:": "Posizione del wafer:", + "RR Display status:": "Stato del RR:", + "Wafer Position:": "Posizione nel Wafer:", "Credits": "Crediti", "Developers": "Sviluppatori", "Contributors": "Collaboratori", "Testers": "Tester", - "Special Thanks": "Un ringraziamento speciale", + "Special Thanks": "Un Ringraziamento Speciale", "Unknown": "Sconosciuto", "Installed": "Installato", "Not Installed": "Non installato", "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "LA LICENZA PER GLI ARTICOLI DI BIRRA", + "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE", "Default": "Predefinito", - "Do Not Override": "Non sovrascrivere", + "Do Not Override": "Non Sovrascrivere", "Disabled": "Disabilitato", "Enabled": "Abilitato", " \\ue0e3 Reset": "\\ue0e3 Ripristina", - "Display": "Visualizzazione", + "Display": "Schermo", "Application changed\\n\\n": "Applicazione modificata\\n\\n", "The running application changed\\n\\n": "L'applicazione in esecuzione è cambiata\\n\\n", "while editing was going on.": "mentre era in corso la modifica.", - "Board": "Consiglio", + "Board": "Scheda", "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al modulo di sistema hoc-clk.\\n\\n", + "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al sysmodule hoc-clk.\\n\\n", "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n", "correctly installed and enabled.": "correttamente installato e abilitato.", "Fatal error": "Errore fatale", - "Temporary Overrides ": "Sostituzioni temporanee", - "Sleep Mode": "Modalità di sospensione", - "Stock": "Magazzino", - "Dev OC": "OC di sviluppo", - "Boost Mode": "Modalità potenziamento", - "Safe Max": "Sicuro massimo", - "Unsafe Max": "Non sicuro Max", - "Absolute Max": "Massimo assoluto", - "Handheld Safe Max": "Cassaforte portatile max", + "Temporary Overrides ": "Sostituzioni Temporanee", + "Sleep Mode": "Modalità di Sospensione", + "Stock": "Originale", + "Dev OC": "OC dev", + "Boost Mode": "Modalità Boost", + "Safe Max": "Massimo Sicuro", + "Unsafe Max": "Massimo Non Sicuro", + "Absolute Max": "Massimo Assoluto", + "Handheld Safe Max": "Massimo Sicuro Modalità Portatile", "Enable": "Abilita", - "Edit App Profile": "Modifica profilo dell'app", - "Edit Global Profile": "Modifica profilo globale", - "Temporary Overrides": "Sostituzioni temporanee", + "Edit App Profile": "Modifica Profilo Dell'App", + "Edit Global Profile": "Modifica Profilo Globale", + "Temporary Overrides": "Sostituzioni Temporanee", "Settings": "Impostazioni", - "About": "Circa", + "About": "A Riguardo Di", "Compiling with minimal features": "Compilazione con funzionalità minime", - "General Settings": "Impostazioni generali", - "Governor Settings": "Impostazioni del governatore", - "Safety Settings": "Impostazioni di sicurezza", - "Save KIP Settings": "Salva le impostazioni KIP", + "General Settings": "Impostazioni Generali", + "Governor Settings": "Impostazioni Del Governor", + "Safety Settings": "Impostazioni Di Sicurezza", + "Save KIP Settings": "Salva le impostazioni del KIP", "RAM Settings": "Impostazioni della RAM", "CPU Settings": "Impostazioni della CPU", "GPU Settings": "Impostazioni della GPU", - "Display Settings": "Impostazioni di visualizzazione", + "Display Settings": "Impostazioni dello Schermo", "Experimental": "Sperimentale", - "GPU Scheduling Override Method": "Metodo di override della pianificazione GPU", + "GPU Scheduling Override Method": "Metodo di override dello scheduling GPU", "can be dangerous and may cause": "può essere pericoloso e può causare", "damage to your battery or charger!": "danni alla batteria o al caricabatterie!", - "Charge Current Override": "Override della corrente di carica", - "RAM Voltage Display Mode": "Modalità di visualizzazione della tensione RAM", + "Charge Current Override": "Override della Corrente di Carica", + "RAM Voltage Display Mode": "Modalità di Visualizzazione della Tensione RAM", "Polling Interval": "Intervallo di polling", - "CPU Governor Minimum Frequency": "Frequenza minima del governatore della CPU", + "CPU Governor Minimum Frequency": "Frequenza minima del Governor della CPU", "refresh rates may cause stress": "le frequenze di aggiornamento possono causare stress", "or damage to your display! ": "o danni al display!", "Proceed at your own risk!": "Procedi a tuo rischio e pericolo!", - "Max Handheld Display": "Display portatile massimo", - "Display Clock": "Visualizza orologio", - "Official Rating": "Valutazione ufficiale", + "Max Handheld Display": "Display Massimo in Modalità Portatile", + "Display Clock": "Frequenza del Display", + "Official Rating": "Rating Ufficiale", "TDP Threshold": "Soglia TDP", "Power": "Potenza", - "Thermal Throttle Limit": "Limite della valvola termica", + "Thermal Throttle Limit": "Limite Termico", "HP Mode": "Modalità HP", "Default (Mariko)": "Predefinito (Mariko)", "Default (Erista)": "Predefinito (Erista)", "Rating": "Valutazione", - "Safe Max (Mariko)": "Safe Max (Mariko)", - "Safe Max (Erista)": "Safe Max (Erista)", + "Safe Max (Mariko)": "Massimo Sicuro (Mariko)", + "Safe Max (Erista)": "Massimo Sicuro (Erista)", "RAM VDD2 Voltage": "Tensione RAM VDD2", "Voltage": "Voltaggio", "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM", "RAM Frequency Editor": "Editor della frequenza RAM", "JEDEC.": "JEDEC.", - "High speedo needed!": "È necessaria l'alta velocità!", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL estremo)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL estremo)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL estremo)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (è necessario un ridicolo Speedo/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (è necessario un ridicolo Speedo/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (è necessario un ridicolo Speedo/PLL)", - "Ram Max Clock": "Orologio Ram Max", - "RAM Latency Editor": "Editor della latenza RAM", - "RAM Timing Reductions": "Riduzioni della temporizzazione della RAM", - "Memory Timings": "Tempi di memoria", + "High speedo needed!": "Alto Valore Speedo Necessario!", + "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL altissimo)", + "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL altissimo)", + "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL altissimo)", + "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (richiede Speedo/PLL estremo)", + "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (richiede Speedo/PLL estremo)", + "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (richiede Speedo/PLL estremo)", + "Ram Max Clock": "Frequenza Massima Ram", + "RAM Latency Editor": "Editor della Latenza RAM", + "RAM Timing Reductions": "Riduzioni dei Timing della RAM", + "Memory Timings": "Timing di Memoria", "Advanced": "Avanzato", - "t6 tRTW Fine Tune": "t6 tRTW Sintonia fine", - "tRTW Fine Tune": "tRTW Sintonia fine", - "t7 tWTR Fine Tune": "t7 tWTR Sintonia fine", - "tWTR Fine Tune": "tWTR Sintonia fine", - "Memory Latencies": "Latenza della memoria", - "Read Latency": "Leggi latenza", - "Write Latency": "Scrivi latenza", - "CPU Boost Clock": "Orologio di potenziamento della CPU", - "CPU UV": "UV della CPU", + "t6 tRTW Fine Tune": "Regolazione Fine t6 tRTW", + "tRTW Fine Tune": "Regolazione Fine tRTW", + "t7 tWTR Fine Tune": "Regolazione Fine t7 tWTR", + "tWTR Fine Tune": "Regolazione Fine tWTR", + "Memory Latencies": "Latenza della Memoria", + "Read Latency": "Latenza di Lettura", + "Write Latency": "Latenza di Scrittura", + "CPU Boost Clock": "Frequenza CPU in Boost", + "CPU UV": "Undervolt CPU", "CPU Unlock": "Sblocco della CPU", - "CPU VMIN": "CPUVMIN", + "CPU VMIN": "CPU VMIN", "CPU Max Voltage": "Voltaggio massimo della CPU", - "CPU Max Clock": "Orologio massimo della CPU", - "Extreme UV Table": "Tavolo UV estremo", + "CPU Max Clock": "Frequenza massima della CPU", + "Extreme UV Table": "Tabella UV estremo", "CPU UV Table": "Tabella UV della CPU", - "CPU Low UV": "CPU con raggi UV bassi", - "CPU High UV": "UV elevato della CPU", - "CPU Low VMIN": "VMIN CPU basso", - "CPU High VMIN": "CPU alta VMIN", - "No Undervolt": "Nessuna sottotensione", + "CPU Low UV": "CPU UV Bassa Frequenza", + "CPU High UV": "CPU UV Alta Frequenza", + "CPU Low VMIN": "CPU VMIN Bassa Frequenza", + "CPU High VMIN": "CPU VMIN Alta Frequenza", + "No Undervolt": "Nessun Undervolt", "SLT Table": "Tabella SLT", "HiOPT Table": "Tabella HiOPT", - "GPU Undervolt Table": "Tabella di sottotensione GPU", - "GPU Minimum Voltage": "Voltaggio minimo della GPU", + "GPU Undervolt Table": "Tabella di Undervolt GPU", + "GPU Minimum Voltage": "Voltaggio Minimo della GPU", "Calculate GPU Vmin": "Calcola GPU Vmin", - "GPU VMIN": "GPUVMIN", + "GPU VMIN": "GPU VMIN", "GPU Maximum Voltage": "Voltaggio massimo della GPU", - "GPU Voltage Offset": "Offset di tensione della GPU", + "GPU Voltage Offset": "Offset di Voltaggio della GPU", "Do not override": "Non sovrascrivere", "Enabled (Default)": "Abilitato (impostazione predefinita)", "96.6% limit": "Limite del 96,6%.", "99.7% limit": "Limite del 99,7%.", - "GPU Scheduling Override": "Override della pianificazione GPU", + "GPU Scheduling Override": "Override dello Scheduling GPU", "Official Service": "Servizio ufficiale", "GPU DVFS Mode": "Modalità DVFS GPU", "GPU DVFS Offset": "Offset DVFS della GPU", - "GPU Voltage Table": "Tabella delle tensioni della GPU", - "GPU Custom Table (mV)": "Tabella personalizzata GPU (mV)", + "GPU Voltage Table": "Tabella delle Tensioni della GPU", + "GPU Custom Table (mV)": "Tabella GPU Personalizzata (mV)", "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT", "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare", - "permanent damage to your Switch!": "danni permanenti al tuo Switch!", - "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz attivi", + "permanent damage to your Switch!": "danni permanenti alla tua Switch!", + "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz su", "SLT or HiOPT can cause ": "SLT o HiOPT possono causare" } diff --git a/dist/config/horizon-oc/lang/lang/de.json b/dist/config/horizon-oc/lang/lang/de.json deleted file mode 100644 index d2eedf0b..00000000 --- a/dist/config/horizon-oc/lang/lang/de.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Informationen", - "IDDQ:": "IDDQ:", - "Module: ": "Modul:", - "sys-dock status:": "Sys-Dock-Status:", - "SaltyNX status:": "SaltyNX-Status:", - "RR Display status:": "RR Anzeigestatus:", - "Wafer Position:": "Waferposition:", - "Credits": "Credits", - "Developers": "Entwickler", - "Contributors": "Mitwirkende", - "Testers": "Tester", - "Special Thanks": "Besonderer Dank", - "Unknown": "Unbekannt", - "Installed": "Installiert", - "Not Installed": "Nicht installiert", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "DIE BIERWAREN-LIZENZ", - "Default": "Standard", - "Do Not Override": "Nicht überschreiben", - "Disabled": "Deaktiviert", - "Enabled": "Aktiviert", - " \\ue0e3 Reset": "\\ue0e3 Zurücksetzen", - "Display": "Anzeige", - "Application changed\\n\\n": "Anwendung geändert\\n\\n", - "The running application changed\\n\\n": "Die laufende Anwendung hat sich geändert\\n\\n", - "while editing was going on.": "während die Bearbeitung im Gange war.", - "Board": "Vorstand", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Es konnte keine Verbindung zum hoc-clk-Systemmodul hergestellt werden.\\n\\n", - "Please make sure everything is\\n\\n": "Bitte stellen Sie sicher, dass alles in Ordnung ist\\n\\n", - "correctly installed and enabled.": "korrekt installiert und aktiviert.", - "Fatal error": "Fataler Fehler", - "Temporary Overrides ": "Temporäre Überschreibungen", - "Sleep Mode": "Schlafmodus", - "Stock": "Lager", - "Dev OC": "Entwickler OC", - "Boost Mode": "Boost-Modus", - "Safe Max": "Sicher max", - "Unsafe Max": "Unsicher max", - "Absolute Max": "Absolutes Maximum", - "Handheld Safe Max": "Handsafe max", - "Enable": "Aktivieren", - "Edit App Profile": "App-Profil bearbeiten", - "Edit Global Profile": "Globales Profil bearbeiten", - "Temporary Overrides": "Temporäre Überschreibungen", - "Settings": "Einstellungen", - "About": "Über", - "Compiling with minimal features": "Kompilieren mit minimalen Funktionen", - "General Settings": "Allgemeine Einstellungen", - "Governor Settings": "Gouverneurseinstellungen", - "Safety Settings": "Sicherheitseinstellungen", - "Save KIP Settings": "Speichern Sie die KIP-Einstellungen", - "RAM Settings": "RAM-Einstellungen", - "CPU Settings": "CPU-Einstellungen", - "GPU Settings": "GPU-Einstellungen", - "Display Settings": "Anzeigeeinstellungen", - "Experimental": "Experimentell", - "GPU Scheduling Override Method": "GPU-Planungsüberschreibungsmethode", - "can be dangerous and may cause": "kann gefährlich sein und verursachen", - "damage to your battery or charger!": "Schäden an Ihrem Akku oder Ladegerät!", - "Charge Current Override": "Ladestrom-Überbrückung", - "RAM Voltage Display Mode": "RAM-Spannungsanzeigemodus", - "Polling Interval": "Abfrageintervall", - "CPU Governor Minimum Frequency": "Mindestfrequenz des CPU-Reglers", - "refresh rates may cause stress": "Bildwiederholraten können Stress verursachen", - "or damage to your display! ": "oder Schäden an Ihrem Display!", - "Proceed at your own risk!": "Das Vorgehen erfolgt auf eigene Gefahr!", - "Max Handheld Display": "Max Handheld-Display", - "Display Clock": "Uhr anzeigen", - "Official Rating": "Offizielle Bewertung", - "TDP Threshold": "TDP-Schwellenwert", - "Power": "Macht", - "Thermal Throttle Limit": "Thermische Drosselgrenze", - "HP Mode": "HP-Modus", - "Default (Mariko)": "Standard (Mariko)", - "Default (Erista)": "Standard (Erista)", - "Rating": "Bewertung", - "Safe Max (Mariko)": "Safe Max (Mariko)", - "Safe Max (Erista)": "Safe Max (Erista)", - "RAM VDD2 Voltage": "RAM VDD2 Spannung", - "Voltage": "Spannung", - "RAM VDDQ Voltage": "RAM-VDDQ-Spannung", - "RAM Frequency Editor": "RAM-Frequenzeditor", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Hoher Tacho erforderlich!", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (Benötigt extremen Tacho/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (Benötigt extremen Tacho/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (Benötigt extremen Tacho/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (Benötigt lächerlichen Tacho/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (Benötigt lächerlichen Tacho/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (Benötigt lächerlichen Tacho/PLL)", - "Ram Max Clock": "Ram Max Uhr", - "RAM Latency Editor": "RAM-Latenz-Editor", - "RAM Timing Reductions": "Reduzierung des RAM-Timings", - "Memory Timings": "Speicherzeiten", - "Advanced": "Fortgeschritten", - "t6 tRTW Fine Tune": "t6 tRTW Feinabstimmung", - "tRTW Fine Tune": "tRTW-Feinabstimmung", - "t7 tWTR Fine Tune": "t7 tWTR Feinabstimmung", - "tWTR Fine Tune": "tWTR-Feinabstimmung", - "Memory Latencies": "Speicherlatenzen", - "Read Latency": "Leselatenz", - "Write Latency": "Schreiblatenz", - "CPU Boost Clock": "CPU-Boost-Takt", - "CPU UV": "CPU-UV", - "CPU Unlock": "CPU-Entsperrung", - "CPU VMIN": "CPU-VMIN", - "CPU Max Voltage": "Maximale CPU-Spannung", - "CPU Max Clock": "Maximaler CPU-Takt", - "Extreme UV Table": "Extremer UV-Tisch", - "CPU UV Table": "CPU-UV-Tisch", - "CPU Low UV": "CPU-niedrige UV-Strahlung", - "CPU High UV": "CPU Hohe UV-Strahlung", - "CPU Low VMIN": "CPU niedrig VMIN", - "CPU High VMIN": "CPU hoch VMIN", - "No Undervolt": "Kein Undervolt", - "SLT Table": "SLT-Tisch", - "HiOPT Table": "HiOPT-Tabelle", - "GPU Undervolt Table": "GPU-Unterspannungstabelle", - "GPU Minimum Voltage": "GPU-Mindestspannung", - "Calculate GPU Vmin": "Berechnen Sie die GPU-Vmin", - "GPU VMIN": "GPU-VMIN", - "GPU Maximum Voltage": "Maximale GPU-Spannung", - "GPU Voltage Offset": "GPU-Spannungsoffset", - "Do not override": "Nicht überschreiben", - "Enabled (Default)": "Aktiviert (Standard)", - "96.6% limit": "96,6 %-Grenze", - "99.7% limit": "99,7 %-Grenze", - "GPU Scheduling Override": "GPU-Planungsüberschreibung", - "Official Service": "Offizieller Dienst", - "GPU DVFS Mode": "GPU-DVFS-Modus", - "GPU DVFS Offset": "GPU-DVFS-Offset", - "GPU Voltage Table": "GPU-Spannungstabelle", - "GPU Custom Table (mV)": "Benutzerdefinierte GPU-Tabelle (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075 MHz ohne UV, 1152 MHz auf SLT", - "or 1228MHz on HiOPT can cause ": "oder 1228 MHz auf HiOPT kann dazu führen", - "permanent damage to your Switch!": "Dauerhafter Schaden an Ihrem Switch!", - "921MHz without UV and 960MHz on": "921 MHz ohne UV und 960 MHz eingeschaltet", - "SLT or HiOPT can cause ": "SLT oder HiOPT können dazu führen" -} diff --git a/dist/config/horizon-oc/lang/lang/en.json b/dist/config/horizon-oc/lang/lang/en.json deleted file mode 100644 index 727fab93..00000000 --- a/dist/config/horizon-oc/lang/lang/en.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Information", - "IDDQ:": "IDDQ:", - "Module: ": "Module: ", - "sys-dock status:": "sys-dock status:", - "SaltyNX status:": "SaltyNX status:", - "RR Display status:": "RR Display status:", - "Wafer Position:": "Wafer Position:", - "Credits": "Credits", - "Developers": "Developers", - "Contributors": "Contributors", - "Testers": "Testers", - "Special Thanks": "Special Thanks", - "Unknown": "Unknown", - "Installed": "Installed", - "Not Installed": "Not Installed", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE", - "Default": "Default", - "Do Not Override": "Do Not Override", - "Disabled": "Disabled", - "Enabled": "Enabled", - " \\ue0e3 Reset": " \\ue0e3 Reset", - "Display": "Display", - "Application changed\\n\\n": "Application changed\\n\\n", - "The running application changed\\n\\n": "The running application changed\\n\\n", - "while editing was going on.": "while editing was going on.", - "Board": "Board", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Could not connect to hoc-clk sysmodule.\\n\\n", - "Please make sure everything is\\n\\n": "Please make sure everything is\\n\\n", - "correctly installed and enabled.": "correctly installed and enabled.", - "Fatal error": "Fatal error", - "Temporary Overrides ": "Temporary Overrides ", - "Sleep Mode": "Sleep Mode", - "Stock": "Stock", - "Dev OC": "Dev OC", - "Boost Mode": "Boost Mode", - "Safe Max": "Safe Max", - "Unsafe Max": "Unsafe Max", - "Absolute Max": "Absolute Max", - "Handheld Safe Max": "Handheld Safe Max", - "Enable": "Enable", - "Edit App Profile": "Edit App Profile", - "Edit Global Profile": "Edit Global Profile", - "Temporary Overrides": "Temporary Overrides", - "Settings": "Settings", - "About": "About", - "Compiling with minimal features": "Compiling with minimal features", - "General Settings": "General Settings", - "Governor Settings": "Governor Settings", - "Safety Settings": "Safety Settings", - "Save KIP Settings": "Save KIP Settings", - "RAM Settings": "RAM Settings", - "CPU Settings": "CPU Settings", - "GPU Settings": "GPU Settings", - "Display Settings": "Display Settings", - "Experimental": "Experimental", - "GPU Scheduling Override Method": "GPU Scheduling Override Method", - "can be dangerous and may cause": "can be dangerous and may cause", - "damage to your battery or charger!": "damage to your battery or charger!", - "Charge Current Override": "Charge Current Override", - "RAM Voltage Display Mode": "RAM Voltage Display Mode", - "Polling Interval": "Polling Interval", - "CPU Governor Minimum Frequency": "CPU Governor Minimum Frequency", - "refresh rates may cause stress": "refresh rates may cause stress", - "or damage to your display! ": "or damage to your display! ", - "Proceed at your own risk!": "Proceed at your own risk!", - "Max Handheld Display": "Max Handheld Display", - "Display Clock": "Display Clock", - "Official Rating": "Official Rating", - "TDP Threshold": "TDP Threshold", - "Power": "Power", - "Thermal Throttle Limit": "Thermal Throttle Limit", - "HP Mode": "HP Mode", - "Default (Mariko)": "Default (Mariko)", - "Default (Erista)": "Default (Erista)", - "Rating": "Rating", - "Safe Max (Mariko)": "Safe Max (Mariko)", - "Safe Max (Erista)": "Safe Max (Erista)", - "RAM VDD2 Voltage": "RAM VDD2 Voltage", - "Voltage": "Voltage", - "RAM VDDQ Voltage": "RAM VDDQ Voltage", - "RAM Frequency Editor": "RAM Frequency Editor", - "JEDEC.": "JEDEC.", - "High speedo needed!": "High speedo needed!", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Needs extreme Speedo/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Needs extreme Speedo/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Needs extreme Speedo/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Needs ridiculous Speedo/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Needs ridiculous Speedo/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Needs ridiculous Speedo/PLL)", - "Ram Max Clock": "Ram Max Clock", - "RAM Latency Editor": "RAM Latency Editor", - "RAM Timing Reductions": "RAM Timing Reductions", - "Memory Timings": "Memory Timings", - "Advanced": "Advanced", - "t6 tRTW Fine Tune": "t6 tRTW Fine Tune", - "tRTW Fine Tune": "tRTW Fine Tune", - "t7 tWTR Fine Tune": "t7 tWTR Fine Tune", - "tWTR Fine Tune": "tWTR Fine Tune", - "Memory Latencies": "Memory Latencies", - "Read Latency": "Read Latency", - "Write Latency": "Write Latency", - "CPU Boost Clock": "CPU Boost Clock", - "CPU UV": "CPU UV", - "CPU Unlock": "CPU Unlock", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "CPU Max Voltage", - "CPU Max Clock": "CPU Max Clock", - "Extreme UV Table": "Extreme UV Table", - "CPU UV Table": "CPU UV Table", - "CPU Low UV": "CPU Low UV", - "CPU High UV": "CPU High UV", - "CPU Low VMIN": "CPU Low VMIN", - "CPU High VMIN": "CPU High VMIN", - "No Undervolt": "No Undervolt", - "SLT Table": "SLT Table", - "HiOPT Table": "HiOPT Table", - "GPU Undervolt Table": "GPU Undervolt Table", - "GPU Minimum Voltage": "GPU Minimum Voltage", - "Calculate GPU Vmin": "Calculate GPU Vmin", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "GPU Maximum Voltage", - "GPU Voltage Offset": "GPU Voltage Offset", - "Do not override": "Do not override", - "Enabled (Default)": "Enabled (Default)", - "96.6% limit": "96.6% limit", - "99.7% limit": "99.7% limit", - "GPU Scheduling Override": "GPU Scheduling Override", - "Official Service": "Official Service", - "GPU DVFS Mode": "GPU DVFS Mode", - "GPU DVFS Offset": "GPU DVFS Offset", - "GPU Voltage Table": "GPU Voltage Table", - "GPU Custom Table (mV)": "GPU Custom Table (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075MHz without UV, 1152MHz on SLT", - "or 1228MHz on HiOPT can cause ": "or 1228MHz on HiOPT can cause ", - "permanent damage to your Switch!": "permanent damage to your Switch!", - "921MHz without UV and 960MHz on": "921MHz without UV and 960MHz on", - "SLT or HiOPT can cause ": "SLT or HiOPT can cause " -} diff --git a/dist/config/horizon-oc/lang/lang/es.json b/dist/config/horizon-oc/lang/lang/es.json deleted file mode 100644 index a938c1e3..00000000 --- a/dist/config/horizon-oc/lang/lang/es.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Información", - "IDDQ:": "IDDQ:", - "Module: ": "Módulo:", - "sys-dock status:": "Estado de sys-dock:", - "SaltyNX status:": "Estado de SaltyNX:", - "RR Display status:": "Estado de pantalla RR:", - "Wafer Position:": "Posición del wafer:", - "Credits": "Créditos", - "Developers": "Desarrolladores", - "Contributors": "Colaboradores", - "Testers": "Testers", - "Special Thanks": "Agradecimientos especiales", - "Unknown": "Desconocido", - "Installed": "Instalado", - "Not Installed": "No instalado", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "LICENCIA BEER-WARE", - "Default": "Predeterminado", - "Do Not Override": "No sobrescribir", - "Disabled": "Desactivado", - "Enabled": "Activado", - " \\ue0e3 Reset": "\\ue0e3 Restablecer", - "Display": "Pantalla", - "Application changed\\n\\n": "Aplicación cambiada\\n\\n", - "The running application changed\\n\\n": "La aplicación en ejecución ha cambiado\\n\\n", - "while editing was going on.": "mientras se estaba editando.", - "Board": "Placa", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al sysmodule hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Asegúrate de que todo esté\\n\\n", - "correctly installed and enabled.": "correctamente instalado y activado.", - "Fatal error": "Error fatal", - "Temporary Overrides ": "Ajustes temporales", - "Sleep Mode": "Modo reposo", - "Stock": "Valores de fábrica", - "Dev OC": "OC de desarrollo", - "Boost Mode": "Modo boost", - "Safe Max": "Máximo seguro", - "Unsafe Max": "Máximo no seguro", - "Absolute Max": "Máximo absoluto", - "Handheld Safe Max": "Máximo seguro en portátil", - "Enable": "Activar", - "Edit App Profile": "Editar perfil de aplicación", - "Edit Global Profile": "Editar perfil global", - "Temporary Overrides": "Ajustes temporales", - "Settings": "Configuración", - "About": "Acerca de", - "Compiling with minimal features": "Compilado con funciones mínimas", - "General Settings": "Configuración general", - "Governor Settings": "Configuración del governor", - "Safety Settings": "Configuración de seguridad", - "Save KIP Settings": "Guardar configuración KIP", - "RAM Settings": "Configuración de RAM", - "CPU Settings": "Configuración de CPU", - "GPU Settings": "Configuración de GPU", - "Display Settings": "Configuración de pantalla", - "Experimental": "Experimental", - "GPU Scheduling Override Method": "Método de sobrescritura del scheduling de GPU", - "can be dangerous and may cause": "puede ser peligroso y causar", - "damage to your battery or charger!": "daños a la batería o al cargador.", - "Charge Current Override": "Sobrescritura de corriente de carga", - "RAM Voltage Display Mode": "Modo de visualización de voltaje de RAM", - "Polling Interval": "Intervalo de sondeo", - "CPU Governor Minimum Frequency": "Frecuencia mínima del governor de CPU", - "refresh rates may cause stress": "las tasas de refresco pueden causar estrés", - "or damage to your display! ": "o dañar la pantalla.", - "Proceed at your own risk!": "¡Úsalo bajo tu propio riesgo!", - "Max Handheld Display": "Frecuencia máxima de pantalla en portátil", - "Display Clock": "Frecuencia de pantalla", - "Official Rating": "Valor oficial", - "TDP Threshold": "Umbral de TDP", - "Power": "Potencia", - "Thermal Throttle Limit": "Límite de thermal throttling", - "HP Mode": "Modo alto rendimiento", - "Default (Mariko)": "Predeterminado (Mariko)", - "Default (Erista)": "Predeterminado (Erista)", - "Rating": "Valor", - "Safe Max (Mariko)": "Máximo seguro (Mariko)", - "Safe Max (Erista)": "Máximo seguro (Erista)", - "RAM VDD2 Voltage": "Voltaje VDD2 de RAM", - "Voltage": "Voltaje", - "RAM VDDQ Voltage": "Voltaje VDDQ de RAM", - "RAM Frequency Editor": "Editor de frecuencia de RAM", - "JEDEC.": "JEDEC", - "High speedo needed!": "¡Se necesita alto speedo!", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (requiere Speedo/PLL extremo)", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (requiere Speedo/PLL extremo)", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (requiere Speedo/PLL extremo)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (requiere Speedo/PLL muy alto)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (requiere Speedo/PLL muy alto)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (requiere Speedo/PLL muy alto)", - "Ram Max Clock": "Frecuencia máxima de RAM", - "RAM Latency Editor": "Editor de latencias de RAM", - "RAM Timing Reductions": "Reducción de timings de RAM", - "Memory Timings": "Timings de memoria", - "Advanced": "Avanzado", - "t6 tRTW Fine Tune": "Ajuste fino t6 tRTW", - "tRTW Fine Tune": "Ajuste fino tRTW", - "t7 tWTR Fine Tune": "Ajuste fino t7 tWTR", - "tWTR Fine Tune": "Ajuste fino tWTR", - "Memory Latencies": "Latencias de memoria", - "Read Latency": "Latencia de lectura", - "Write Latency": "Latencia de escritura", - "CPU Boost Clock": "Frecuencia boost de CPU", - "CPU UV": "Undervolt de CPU", - "CPU Unlock": "Desbloqueo de CPU", - "CPU VMIN": "VMIN de CPU", - "CPU Max Voltage": "Voltaje máximo de CPU", - "CPU Max Clock": "Frecuencia máxima de CPU", - "Extreme UV Table": "Tabla de undervolt extrema", - "CPU UV Table": "Tabla de undervolt de CPU", - "CPU Low UV": "Undervolt bajo de CPU", - "CPU High UV": "Undervolt alto de CPU", - "CPU Low VMIN": "VMIN bajo de CPU", - "CPU High VMIN": "VMIN alto de CPU", - "No Undervolt": "Sin undervolt", - "SLT Table": "Tabla SLT", - "HiOPT Table": "Tabla HiOPT", - "GPU Undervolt Table": "Tabla de undervolt de GPU", - "GPU Minimum Voltage": "Voltaje mínimo de GPU", - "Calculate GPU Vmin": "Calcular Vmin de GPU", - "GPU VMIN": "VMIN de GPU", - "GPU Maximum Voltage": "Voltaje máximo de GPU", - "GPU Voltage Offset": "Offset de voltaje de GPU", - "Do not override": "No sobrescribir", - "Enabled (Default)": "Activado (predeterminado)", - "96.6% limit": "Límite 96,6%", - "99.7% limit": "Límite 99,7%", - "GPU Scheduling Override": "Sobrescritura de scheduling de GPU", - "Official Service": "Servicio oficial", - "GPU DVFS Mode": "Modo DVFS de GPU", - "GPU DVFS Offset": "Offset DVFS de GPU", - "GPU Voltage Table": "Tabla de voltaje de GPU", - "GPU Custom Table (mV)": "Tabla personalizada de GPU (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075MHz sin undervolt, 1152MHz en SLT", - "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar ", - "permanent damage to your Switch!": "¡daño permanente a tu Switch!", - "921MHz without UV and 960MHz on": "921MHz sin undervolt y 960MHz en", - "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar " -} \ No newline at end of file diff --git a/dist/config/horizon-oc/lang/lang/fr.json b/dist/config/horizon-oc/lang/lang/fr.json deleted file mode 100644 index e4e41177..00000000 --- a/dist/config/horizon-oc/lang/lang/fr.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Informations", - "IDDQ:": "IDDQ :", - "Module: ": "Module :", - "sys-dock status:": "Statut de sys-dock :", - "SaltyNX status:": "Statut de SaltyNX :", - "RR Display status:": "Statut de l'affichage RR :", - "Wafer Position:": "Position du wafer :", - "Credits": "Crédits", - "Developers": "Développeurs", - "Contributors": "Contributeurs", - "Testers": "Testeurs", - "Special Thanks": "Remerciements spéciaux", - "Unknown": "Inconnu", - "Installed": "Installé", - "Not Installed": "Non installé", - "X: %u Y: %u": "X : %u Y : %u", - "THE BEER-WARE LICENSE": "LA LICENCE BEER-WARE", - "Default": "Par défaut", - "Do Not Override": "Ne pas remplacer", - "Disabled": "Désactivé", - "Enabled": "Activé", - " \\ue0e3 Reset": "\\ue0e3 Réinitialiser", - "Display": "Écran", - "Application changed\\n\\n": "Application modifiée\\n\\n", - "The running application changed\\n\\n": "L'application en cours d'exécution a changé\\n\\n", - "while editing was going on.": "pendant la modification.", - "Board": "Carte", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au sysmodule hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Veuillez vous assurer que tout est\\n\\n", - "correctly installed and enabled.": "correctement installé et activé.", - "Fatal error": "Erreur fatale", - "Temporary Overrides ": "Forçages temporaires ", - "Sleep Mode": "Mode veille", - "Stock": "D'origine", - "Dev OC": "OC Développeur", - "Boost Mode": "Mode Boost", - "Safe Max": "Max sûr", - "Unsafe Max": "Max non sûr", - "Absolute Max": "Max absolu", - "Handheld Safe Max": "Max sûr (mode portable)", - "Enable": "Activer", - "Edit App Profile": "Modifier le profil de l'app", - "Edit Global Profile": "Modifier le profil global", - "Temporary Overrides": "Forçages temporaires", - "Settings": "Paramètres", - "About": "À propos", - "Compiling with minimal features": "Compilation avec fonctionnalités minimales", - "General Settings": "Paramètres généraux", - "Governor Settings": "Paramètres du gouverneur", - "Safety Settings": "Paramètres de sécurité", - "Save KIP Settings": "Enregistrer les paramètres KIP", - "RAM Settings": "Paramètres RAM", - "CPU Settings": "Paramètres CPU", - "GPU Settings": "Paramètres GPU", - "Display Settings": "Paramètres d'affichage", - "Experimental": "Expérimental", - "GPU Scheduling Override Method": "Méthode de Forçage de l'ordonnancement GPU", - "can be dangerous and may cause": "peut être dangereux et causer des", - "damage to your battery or charger!": "dommages à votre batterie ou chargeur !", - "Charge Current Override": "Forçage du courant de charge", - "RAM Voltage Display Mode": "Mode d'affichage de la tension RAM", - "Polling Interval": "Intervalle d'interrogation", - "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur CPU", - "refresh rates may cause stress": "les taux de rafraîchissement peuvent stresser", - "or damage to your display! ": "ou endommager votre écran !", - "Proceed at your own risk!": "À utiliser à vos propres risques !", - "Max Handheld Display": "Affichage portable max", - "Display Clock": "Fréquence d'affichage", - "Official Rating": "Classement officiel", - "TDP Threshold": "Seuil TDP", - "Power": "Alimentation", - "Thermal Throttle Limit": "Limite d'étranglement thermique", - "HP Mode": "Mode HP", - "Default (Mariko)": "Par défaut (Mariko)", - "Default (Erista)": "Par défaut (Erista)", - "Rating": "Évaluation", - "Safe Max (Mariko)": "Max sûr (Mariko)", - "Safe Max (Erista)": "Max sûr (Erista)", - "RAM VDD2 Voltage": "Tension RAM VDD2", - "Voltage": "Tension", - "RAM VDDQ Voltage": "Tension RAM VDDQ", - "RAM Frequency Editor": "Éditeur de fréquence RAM", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Speedo élevé requis !", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite Speedo/PLL extrême)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite Speedo/PLL extrême)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite Speedo/PLL extrême)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite Speedo/PLL ridicule)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite Speedo/PLL ridicule)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite Speedo/PLL ridicule)", - "Ram Max Clock": "Fréquence RAM max", - "RAM Latency Editor": "Éditeur de latence RAM", - "RAM Timing Reductions": "Réductions des timings RAM", - "Memory Timings": "Timings mémoire", - "Advanced": "Avancé", - "t6 tRTW Fine Tune": "Ajustement précis t6 tRTW", - "tRTW Fine Tune": "Ajustement précis tRTW", - "t7 tWTR Fine Tune": "Ajustement précis t7 tWTR", - "tWTR Fine Tune": "Ajustement précis tWTR", - "Memory Latencies": "Latences mémoire", - "Read Latency": "Latence de lecture", - "Write Latency": "Latence d'écriture", - "CPU Boost Clock": "Fréquence Boost CPU", - "CPU UV": "UV CPU", - "CPU Unlock": "Déverrouillage CPU", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "Tension CPU max", - "CPU Max Clock": "Fréquence CPU max", - "Extreme UV Table": "Table d'UV extrême", - "CPU UV Table": "Table d'UV CPU", - "CPU Low UV": "UV CPU faible", - "CPU High UV": "UV CPU élevé", - "CPU Low VMIN": "VMIN CPU faible", - "CPU High VMIN": "VMIN CPU élevé", - "No Undervolt": "Aucun Undervolt", - "SLT Table": "Table SLT", - "HiOPT Table": "Table HiOPT", - "GPU Undervolt Table": "Table d'undervolt GPU", - "GPU Minimum Voltage": "Tension GPU minimale", - "Calculate GPU Vmin": "Calculer Vmin GPU", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "Tension GPU maximale", - "GPU Voltage Offset": "Offset de tension GPU", - "Do not override": "Ne pas remplacer", - "Enabled (Default)": "Activé (par défaut)", - "96.6% limit": "Limite de 96,6 %", - "99.7% limit": "Limite de 99,7 %", - "GPU Scheduling Override": "Forçage de l'ordonnancement GPU", - "Official Service": "Service officiel", - "GPU DVFS Mode": "Mode GPU DVFS", - "GPU DVFS Offset": "Offset GPU DVFS", - "GPU Voltage Table": "Table de tension GPU", - "GPU Custom Table (mV)": "Table de GPU personnalisée (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075 MHz sans UV, 1152 MHz sur SLT", - "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut causer des", - "permanent damage to your Switch!": "dommages permanents à votre Switch !", - "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz sur", - "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent causer des" -} diff --git a/dist/config/horizon-oc/lang/lang/it.json b/dist/config/horizon-oc/lang/lang/it.json deleted file mode 100644 index 5e65fdae..00000000 --- a/dist/config/horizon-oc/lang/lang/it.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Informazioni", - "IDDQ:": "IDDQ:", - "Module: ": "Modulo:", - "sys-dock status:": "stato di sys-dock", - "SaltyNX status:": "Stato di SaltyNX:", - "RR Display status:": "Stato del RR:", - "Wafer Position:": "Posizione nel Wafer:", - "Credits": "Crediti", - "Developers": "Sviluppatori", - "Contributors": "Collaboratori", - "Testers": "Tester", - "Special Thanks": "Un Ringraziamento Speciale", - "Unknown": "Sconosciuto", - "Installed": "Installato", - "Not Installed": "Non installato", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE", - "Default": "Predefinito", - "Do Not Override": "Non Sovrascrivere", - "Disabled": "Disabilitato", - "Enabled": "Abilitato", - " \\ue0e3 Reset": "\\ue0e3 Ripristina", - "Display": "Schermo", - "Application changed\\n\\n": "Applicazione modificata\\n\\n", - "The running application changed\\n\\n": "L'applicazione in esecuzione è cambiata\\n\\n", - "while editing was going on.": "mentre era in corso la modifica.", - "Board": "Scheda", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al sysmodule hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n", - "correctly installed and enabled.": "correttamente installato e abilitato.", - "Fatal error": "Errore fatale", - "Temporary Overrides ": "Sostituzioni Temporanee", - "Sleep Mode": "Modalità di Sospensione", - "Stock": "Originale", - "Dev OC": "OC dev", - "Boost Mode": "Modalità Boost", - "Safe Max": "Massimo Sicuro", - "Unsafe Max": "Massimo Non Sicuro", - "Absolute Max": "Massimo Assoluto", - "Handheld Safe Max": "Massimo Sicuro Modalità Portatile", - "Enable": "Abilita", - "Edit App Profile": "Modifica Profilo Dell'App", - "Edit Global Profile": "Modifica Profilo Globale", - "Temporary Overrides": "Sostituzioni Temporanee", - "Settings": "Impostazioni", - "About": "A Riguardo Di", - "Compiling with minimal features": "Compilazione con funzionalità minime", - "General Settings": "Impostazioni Generali", - "Governor Settings": "Impostazioni Del Governor", - "Safety Settings": "Impostazioni Di Sicurezza", - "Save KIP Settings": "Salva le impostazioni del KIP", - "RAM Settings": "Impostazioni della RAM", - "CPU Settings": "Impostazioni della CPU", - "GPU Settings": "Impostazioni della GPU", - "Display Settings": "Impostazioni dello Schermo", - "Experimental": "Sperimentale", - "GPU Scheduling Override Method": "Metodo di override dello scheduling GPU", - "can be dangerous and may cause": "può essere pericoloso e può causare", - "damage to your battery or charger!": "danni alla batteria o al caricabatterie!", - "Charge Current Override": "Override della Corrente di Carica", - "RAM Voltage Display Mode": "Modalità di Visualizzazione della Tensione RAM", - "Polling Interval": "Intervallo di polling", - "CPU Governor Minimum Frequency": "Frequenza minima del Governor della CPU", - "refresh rates may cause stress": "le frequenze di aggiornamento possono causare stress", - "or damage to your display! ": "o danni al display!", - "Proceed at your own risk!": "Procedi a tuo rischio e pericolo!", - "Max Handheld Display": "Display Massimo in Modalità Portatile", - "Display Clock": "Frequenza del Display", - "Official Rating": "Rating Ufficiale", - "TDP Threshold": "Soglia TDP", - "Power": "Potenza", - "Thermal Throttle Limit": "Limite Termico", - "HP Mode": "Modalità HP", - "Default (Mariko)": "Predefinito (Mariko)", - "Default (Erista)": "Predefinito (Erista)", - "Rating": "Valutazione", - "Safe Max (Mariko)": "Massimo Sicuro (Mariko)", - "Safe Max (Erista)": "Massimo Sicuro (Erista)", - "RAM VDD2 Voltage": "Tensione RAM VDD2", - "Voltage": "Voltaggio", - "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM", - "RAM Frequency Editor": "Editor della frequenza RAM", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Alto Valore Speedo Necessario!", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL altissimo)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL altissimo)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL altissimo)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (richiede Speedo/PLL estremo)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (richiede Speedo/PLL estremo)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (richiede Speedo/PLL estremo)", - "Ram Max Clock": "Frequenza Massima Ram", - "RAM Latency Editor": "Editor della Latenza RAM", - "RAM Timing Reductions": "Riduzioni dei Timing della RAM", - "Memory Timings": "Timing di Memoria", - "Advanced": "Avanzato", - "t6 tRTW Fine Tune": "Regolazione Fine t6 tRTW", - "tRTW Fine Tune": "Regolazione Fine tRTW", - "t7 tWTR Fine Tune": "Regolazione Fine t7 tWTR", - "tWTR Fine Tune": "Regolazione Fine tWTR", - "Memory Latencies": "Latenza della Memoria", - "Read Latency": "Latenza di Lettura", - "Write Latency": "Latenza di Scrittura", - "CPU Boost Clock": "Frequenza CPU in Boost", - "CPU UV": "Undervolt CPU", - "CPU Unlock": "Sblocco della CPU", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "Voltaggio massimo della CPU", - "CPU Max Clock": "Frequenza massima della CPU", - "Extreme UV Table": "Tabella UV estremo", - "CPU UV Table": "Tabella UV della CPU", - "CPU Low UV": "CPU UV Bassa Frequenza", - "CPU High UV": "CPU UV Alta Frequenza", - "CPU Low VMIN": "CPU VMIN Bassa Frequenza", - "CPU High VMIN": "CPU VMIN Alta Frequenza", - "No Undervolt": "Nessun Undervolt", - "SLT Table": "Tabella SLT", - "HiOPT Table": "Tabella HiOPT", - "GPU Undervolt Table": "Tabella di Undervolt GPU", - "GPU Minimum Voltage": "Voltaggio Minimo della GPU", - "Calculate GPU Vmin": "Calcola GPU Vmin", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "Voltaggio massimo della GPU", - "GPU Voltage Offset": "Offset di Voltaggio della GPU", - "Do not override": "Non sovrascrivere", - "Enabled (Default)": "Abilitato (impostazione predefinita)", - "96.6% limit": "Limite del 96,6%.", - "99.7% limit": "Limite del 99,7%.", - "GPU Scheduling Override": "Override dello Scheduling GPU", - "Official Service": "Servizio ufficiale", - "GPU DVFS Mode": "Modalità DVFS GPU", - "GPU DVFS Offset": "Offset DVFS della GPU", - "GPU Voltage Table": "Tabella delle Tensioni della GPU", - "GPU Custom Table (mV)": "Tabella GPU Personalizzata (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT", - "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare", - "permanent damage to your Switch!": "danni permanenti alla tua Switch!", - "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz su", - "SLT or HiOPT can cause ": "SLT o HiOPT possono causare" -} diff --git a/dist/config/horizon-oc/lang/lang/ja.json b/dist/config/horizon-oc/lang/lang/ja.json deleted file mode 100644 index fe415367..00000000 --- a/dist/config/horizon-oc/lang/lang/ja.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "情報", - "IDDQ:": "IDQ:", - "Module: ": "モジュール:", - "sys-dock status:": "システムドックのステータス:", - "SaltyNX status:": "SaltyNX ステータス:", - "RR Display status:": "RR 表示ステータス:", - "Wafer Position:": "ウェーハの位置:", - "Credits": "クレジット", - "Developers": "開発者", - "Contributors": "貢献者", - "Testers": "テスター", - "Special Thanks": "特別な感謝の気持ち", - "Unknown": "不明", - "Installed": "インストール済み", - "Not Installed": "インストールされていません", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "ビール製品ライセンス", - "Default": "デフォルト", - "Do Not Override": "上書きしないでください", - "Disabled": "障害者", - "Enabled": "有効", - " \\ue0e3 Reset": "\\ue0e3 リセット", - "Display": "ディスプレイ", - "Application changed\\n\\n": "アプリケーションが変更されました\\n\\n", - "The running application changed\\n\\n": "実行中のアプリケーションが変更されました\\n\\n", - "while editing was going on.": "編集を進めている最中でした。", - "Board": "理事会", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk sysmodule に接続できませんでした。\\n\\n", - "Please make sure everything is\\n\\n": "すべてが正しいことを確認してください\\n\\n", - "correctly installed and enabled.": "正しくインストールされ、有効になっています。", - "Fatal error": "致命的なエラー", - "Temporary Overrides ": "一時的なオーバーライド", - "Sleep Mode": "スリープモード", - "Stock": "在庫", - "Dev OC": "開発OC", - "Boost Mode": "ブーストモード", - "Safe Max": "セーフマックス", - "Unsafe Max": "危険なマックス", - "Absolute Max": "絶対最大値", - "Handheld Safe Max": "手持ち金庫マックス", - "Enable": "有効にする", - "Edit App Profile": "アプリプロファイルの編集", - "Edit Global Profile": "グローバルプロファイルの編集", - "Temporary Overrides": "一時的なオーバーライド", - "Settings": "設定", - "About": "について", - "Compiling with minimal features": "最小限の機能でコンパイルする", - "General Settings": "一般設定", - "Governor Settings": "ガバナーの設定", - "Safety Settings": "安全設定", - "Save KIP Settings": "KIP 設定の保存", - "RAM Settings": "RAM設定", - "CPU Settings": "CPUの設定", - "GPU Settings": "GPU設定", - "Display Settings": "表示設定", - "Experimental": "実験的", - "GPU Scheduling Override Method": "GPU スケジューリング オーバーライド メソッド", - "can be dangerous and may cause": "危険であり、原因となる可能性があります", - "damage to your battery or charger!": "バッテリーまたは充電器が損傷します。", - "Charge Current Override": "充電電流オーバーライド", - "RAM Voltage Display Mode": "RAM電圧表示モード", - "Polling Interval": "ポーリング間隔", - "CPU Governor Minimum Frequency": "CPU ガバナの最小周波数", - "refresh rates may cause stress": "リフレッシュレートがストレスを引き起こす可能性がある", - "or damage to your display! ": "ディスプレイに損傷を与えてしまいます。", - "Proceed at your own risk!": "自己責任で進めてください！", - "Max Handheld Display": "最大ハンドヘルドディスプレイ", - "Display Clock": "時計の表示", - "Official Rating": "公式評価", - "TDP Threshold": "TDP しきい値", - "Power": "パワー", - "Thermal Throttle Limit": "サーマルスロットル制限", - "HP Mode": "HPモード", - "Default (Mariko)": "デフォルト（マリコ）", - "Default (Erista)": "デフォルト（エリスタ）", - "Rating": "評価", - "Safe Max (Mariko)": "セーフマックス（マリコ）", - "Safe Max (Erista)": "セーフマックス(エリスタ)", - "RAM VDD2 Voltage": "RAM VDD2 電圧", - "Voltage": "電圧", - "RAM VDDQ Voltage": "RAM VDDQ 電圧", - "RAM Frequency Editor": "RAM周波数エディター", - "JEDEC.": "JEDEC。", - "High speedo needed!": "ハイスピードが必要です！", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (エクストリーム Speedo/PLL が必要)", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (エクストリーム Speedo/PLL が必要)", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (エクストリーム Speedo/PLL が必要)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (とんでもない Speedo/PLL が必要)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (とんでもない Speedo/PLL が必要)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (とんでもない Speedo/PLL が必要)", - "Ram Max Clock": "ラムマックスクロック", - "RAM Latency Editor": "RAM レイテンシ エディター", - "RAM Timing Reductions": "RAM タイミングの削減", - "Memory Timings": "メモリタイミング", - "Advanced": "上級者向け", - "t6 tRTW Fine Tune": "t6 tRTW 微調整", - "tRTW Fine Tune": "tRTW 微調整", - "t7 tWTR Fine Tune": "t7 tWTR ファインチューン", - "tWTR Fine Tune": "tWTR ファインチューン", - "Memory Latencies": "メモリレイテンシ", - "Read Latency": "読み取りレイテンシー", - "Write Latency": "書き込みレイテンシ", - "CPU Boost Clock": "CPUブーストクロック", - "CPU UV": "CPU UV", - "CPU Unlock": "CPUロック解除", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "CPU最大電圧", - "CPU Max Clock": "CPU最大クロック", - "Extreme UV Table": "エクストリーム UV テーブル", - "CPU UV Table": "CPU UV テーブル", - "CPU Low UV": "CPU 低 UV", - "CPU High UV": "CPU 高紫外線", - "CPU Low VMIN": "CPU 低 VMIN", - "CPU High VMIN": "CPU の高い VMIN", - "No Undervolt": "不足電圧なし", - "SLT Table": "SLTテーブル", - "HiOPT Table": "HiOPT テーブル", - "GPU Undervolt Table": "GPUアンダーボルトテーブル", - "GPU Minimum Voltage": "GPUの最小電圧", - "Calculate GPU Vmin": "GPU Vmin を計算する", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "GPU最大電圧", - "GPU Voltage Offset": "GPU電圧オフセット", - "Do not override": "上書きしないでください", - "Enabled (Default)": "有効 (デフォルト)", - "96.6% limit": "96.6%制限", - "99.7% limit": "99.7%制限", - "GPU Scheduling Override": "GPU スケジュールのオーバーライド", - "Official Service": "正式サービス", - "GPU DVFS Mode": "GPU DVFS モード", - "GPU DVFS Offset": "GPU DVFS オフセット", - "GPU Voltage Table": "GPU電圧テーブル", - "GPU Custom Table (mV)": "GPUカスタムテーブル(mV)", - "1075MHz without UV, 1152MHz on SLT": "UVなしで1075MHz、SLTで1152MHz", - "or 1228MHz on HiOPT can cause ": "HiOPT で 1228MHz を使用すると、次のような問題が発生する可能性があります。", - "permanent damage to your Switch!": "Switch に永久的なダメージを与えます!", - "921MHz without UV and 960MHz on": "921MHz（UVなし）、960MHz（UVあり）", - "SLT or HiOPT can cause ": "SLT または HiOPT が原因となる可能性があります" -} diff --git a/dist/config/horizon-oc/lang/lang/jp.json b/dist/config/horizon-oc/lang/lang/jp.json deleted file mode 100644 index af92cbf7..00000000 --- a/dist/config/horizon-oc/lang/lang/jp.json +++ /dev/null @@ -1,146 +0,0 @@ -{ - "Information": "Information", - "IDDQ:": "IDDQ:", - "Module: ": "Module:", - "sys-dock status:": "sys-dock status:", - "SaltyNX status:": "SaltyNX status:", - "RR Display status:": "RR Display status:", - "Wafer Position:": "Wafer Position:", - "Credits": "Credits", - "Developers": "Developers", - "Contributors": "Contributors", - "Testers": "Testers", - "Special Thanks": "Special Thanks", - "Unknown": "Unknown", - "Installed": "Installed", - "Not Installed": "Not Installed", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE", - "Default": "Default", - "Do Not Override": "Do Not Override", - "Disabled": "Disabled", - "Enabled": "Enabled", - " \\ue0e3 Reset": "\\ue0e3 Reset", - "Display": "Display", - "Application changed\\n\\n": "Application changed\\n\\n", - "The running application changed\\n\\n": "The running application changed\\n\\n", - "while editing was going on.": "while editing was going on.", - "App ID": "App ID", - "Profile": "Profile", - "Board": "Board", - "USB Charger": "USB Charger", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Could not connect to hoc-clk sysmodule.\\n\\n", - "Please make sure everything is\\n\\n": "Please make sure everything is\\n\\n", - "correctly installed and enabled.": "correctly installed and enabled.", - "Fatal error": "Fatal error", - "Temporary Overrides ": "Temporary Overrides", - "Sleep Mode": "Sleep Mode", - "Stock": "Stock", - "Dev OC": "Dev OC", - "Boost Mode": "Boost Mode", - "Safe Max": "Safe Max", - "Unsafe Max": "Unsafe Max", - "Absolute Max": "Absolute Max", - "Handheld": "Handheld", - "Handheld Safe Max": "Handheld Safe Max", - "Docked": "Docked", - "Enable": "Enable", - "Edit App Profile": "Edit App Profile", - "Edit Global Profile": "Edit Global Profile", - "Temporary Overrides": "Temporary Overrides", - "Settings": "Settings", - "About": "About", - "Compiling with minimal features": "Compiling with minimal features", - "General Settings": "General Settings", - "Governor Settings": "Governor Settings", - "Safety Settings": "Safety Settings", - "Save KIP Settings": "Save KIP Settings", - "RAM Settings": "RAM Settings", - "CPU Settings": "CPU Settings", - "GPU Settings": "GPU Settings", - "Display Settings": "Display Settings", - "Experimental": "Experimental", - "GPU Scheduling Override Method": "GPU Scheduling Override Method", - "can be dangerous and may cause": "can be dangerous and may cause", - "damage to your battery or charger!": "damage to your battery or charger!", - "Charge Current Override": "Charge Current Override", - "RAM Voltage Display Mode": "RAM Voltage Display Mode", - "Polling Interval": "Polling Interval", - "CPU Governor Minimum Frequency": "CPU Governor Minimum Frequency", - "refresh rates may cause stress": "refresh rates may cause stress", - "or damage to your display! ": "or damage to your display!", - "Proceed at your own risk!": "Proceed at your own risk!", - "Max Handheld Display": "Max Handheld Display", - "Display Clock": "Display Clock", - "Official Rating": "Official Rating", - "TDP Threshold": "TDP Threshold", - "Power": "Power", - "Thermal Throttle Limit": "Thermal Throttle Limit", - "HP Mode": "HP Mode", - "Default (Mariko)": "Default (Mariko)", - "Default (Erista)": "Default (Erista)", - "Rating": "Rating", - "Safe Max (Mariko)": "Safe Max (Mariko)", - "Safe Max (Erista)": "Safe Max (Erista)", - "RAM VDD2 Voltage": "RAM VDD2 Voltage", - "Voltage": "Voltage", - "RAM VDDQ Voltage": "RAM VDDQ Voltage", - "RAM Frequency Editor": "RAM Frequency Editor", - "JEDEC.": "JEDEC.", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Needs extreme Speedo/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Needs extreme Speedo/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Needs extreme Speedo/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Needs ridiculous Speedo/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Needs ridiculous Speedo/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Needs ridiculous Speedo/PLL)", - "Ram Max Clock": "Ram Max Clock", - "RAM Latency Editor": "RAM Latency Editor", - "RAM Timing Reductions": "RAM Timing Reductions", - "Memory Timings": "Memory Timings", - "tREFI": "tREFI", - "Advanced": "Advanced", - "t6 tRTW Fine Tune": "t6 tRTW Fine Tune", - "tRTW Fine Tune": "tRTW Fine Tune", - "t7 tWTR Fine Tune": "t7 tWTR Fine Tune", - "tWTR Fine Tune": "tWTR Fine Tune", - "Memory Latencies": "Memory Latencies", - "Read Latency": "Read Latency", - "Write Latency": "Write Latency", - "CPU Boost Clock": "CPU Boost Clock", - "CPU UV": "CPU UV", - "CPU Unlock": "CPU Unlock", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "CPU Max Voltage", - "CPU Max Clock": "CPU Max Clock", - "Extreme UV Table": "Extreme UV Table", - "CPU UV Table": "CPU UV Table", - "CPU Low UV": "CPU Low UV", - "CPU High UV": "CPU High UV", - "CPU Low VMIN": "CPU Low VMIN", - "CPU High VMIN": "CPU High VMIN", - "No Undervolt": "No Undervolt", - "SLT Table": "SLT Table", - "HiOPT Table": "HiOPT Table", - "GPU Undervolt Table": "GPU Undervolt Table", - "GPU Minimum Voltage": "GPU Minimum Voltage", - "Calculate GPU Vmin": "Calculate GPU Vmin", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "GPU Maximum Voltage", - "GPU Voltage Offset": "GPU Voltage Offset", - "Do not override": "Do not override", - "Enabled (Default)": "Enabled (Default)", - "96.6% limit": "96.6% limit", - "99.7% limit": "99.7% limit", - "GPU Scheduling Override": "GPU Scheduling Override", - "Official Service": "Official Service", - "GPU DVFS Mode": "GPU DVFS Mode", - "GPU DVFS Offset": "GPU DVFS Offset", - "GPU Voltage Table": "GPU Voltage Table", - "GPU Custom Table (mV)": "GPU Custom Table (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075MHz without UV, 1152MHz on SLT", - "or 1228MHz on HiOPT can cause ": "or 1228MHz on HiOPT can cause", - "permanent damage to your Switch!": "permanent damage to your Switch!", - "921MHz without UV and 960MHz on": "921MHz without UV and 960MHz on", - "SLT or HiOPT can cause ": "SLT or HiOPT can cause" -} diff --git a/dist/config/horizon-oc/lang/lang/ko.json b/dist/config/horizon-oc/lang/lang/ko.json deleted file mode 100644 index 09e73e66..00000000 --- a/dist/config/horizon-oc/lang/lang/ko.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "정보", - "IDDQ:": "IDDQ:", - "Module: ": "모듈:", - "sys-dock status:": "sys-dock 상태:", - "SaltyNX status:": "SaltyNX 상태:", - "RR Display status:": "RR 표시 상태:", - "Wafer Position:": "웨이퍼 위치:", - "Credits": "크레딧", - "Developers": "개발자", - "Contributors": "기여자", - "Testers": "테스터", - "Special Thanks": "특별한 분", - "Unknown": "알 수 없음", - "Installed": "설치됨", - "Not Installed": "설치되지 않음", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "맥주 제품 라이센스", - "Default": "기본값", - "Do Not Override": "재정의하지 마십시오", - "Disabled": "비활성화", - "Enabled": "활성화됨", - " \\ue0e3 Reset": "\\ue0e3 재설정", - "Display": "디스플레이", - "Application changed\\n\\n": "애플리케이션이 변경되었습니다.\\n\\n", - "The running application changed\\n\\n": "실행 중인 애플리케이션이 변경되었습니다.\\n\\n", - "while editing was going on.": "편집이 진행되는 동안.", - "Board": "보드", - "%u.%u%u mV": "%u.%u%umV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk 시스템 모듈에 연결할 수 없습니다.\\n\\n", - "Please make sure everything is\\n\\n": "모든 것이 올바른지 확인하십시오.\\n\\n", - "correctly installed and enabled.": "올바르게 설치되고 활성화되었습니다.", - "Fatal error": "치명적인 오류", - "Temporary Overrides ": "임시 재정의", - "Sleep Mode": "절전 모드", - "Stock": "주식", - "Dev OC": "개발 OC", - "Overwrite Boost Mode": "부스트 모드 덮어쓰기", - "Safe Max": "안전함 최대값", - "Unsafe Max": "불안정 최대값", - "Absolute Max": "절대 최대값", - "Handheld Safe Max": "휴대모드 안전함 최대값", - "Enable": "활성화", - "Edit App Profile": "앱 프로필 편집", - "Edit Global Profile": "글로벌 프로필 편집", - "Temporary Overrides": "임시 재정의", - "Settings": "설정", - "About": "소개", - "Compiling with minimal features": "최소한의 기능으로 컴파일하기", - "General Settings": "일반 설정", - "Governor Settings": "거버너 설정", - "Safety Settings": "안전 설정", - "Save KIP Settings": "KIP 설정 저장", - "RAM Settings": "RAM 설정", - "CPU Settings": "CPU 설정", - "GPU Settings": "GPU 설정", - "Display Settings": "디스플레이 설정", - "Experimental": "실험적", - "GPU Scheduling Override Method": "GPU 스케줄링 재정의 방법", - "can be dangerous and may cause": "위험할 수 있고 원인이 될 수 있습니다.", - "damage to your battery or charger!": "배터리나 충전기가 손상되었습니다!", - "Charge Current Override": "충전 전류 오버라이드", - "RAM Voltage Display Mode": "RAM 전압 표시 모드", - "Polling Interval": "폴링 간격", - "CPU Governor Minimum Frequency": "CPU 거버너 최소 주파수", - "refresh rates may cause stress": "디스플레이 주사율 빈도 변경은", - "or damage to your display! ": "기기에 손상이 발생될 수 있습니다!", - "Proceed at your own risk!": "책임하에 주의해서 사용하십시오!", - "Max Handheld Display": "최대 휴대용 디스플레이", - "Display Clock": "디스플레이 클럭", - "Official Rating": "공식 등급", - "TDP Threshold": "TDP 임계값", - "Power": "힘", - "Thermal Throttle Limit": "열 스로틀 한계", - "HP Mode": "HP 모드", - "Default (Mariko)": "기본값(마리코)", - "Default (Erista)": "기본값(에리스타)", - "Rating": "표준값", - "Safe Max (Mariko)": "안전함 최대치(마리코)", - "Safe Max (Erista)": "안전함 최대치(에리스타)", - "RAM VDD2 Voltage": "RAM VDD2 전압", - "Voltage": "전압", - "RAM VDDQ Voltage": "RAM VDDQ 전압", - "RAM Frequency Editor": "RAM 주파수 편집기", - "JEDEC.": "JEDEC.", - "High speedo needed!": "높은 스피도값이 필요합니다!", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz(극단적인 Speedo/PLL 필요)", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz(극단적인 Speedo/PLL 필요)", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz(극단적인 Speedo/PLL 필요)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (말도 안 되는 Speedo/PLL 필요)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz(터무니없는 Speedo/PLL 필요)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz(터무니없는 Speedo/PLL 필요)", - "Ram Max Clock": "RAM 최대 클럭", - "RAM Latency Editor": "RAM 지연 시간 편집기", - "RAM Timing Reductions": "RAM 타이밍 편집기", - "Memory Timings": "메모리 타이밍", - "Advanced": "고급", - "t6 tRTW Fine Tune": "t6 tRTW 미세 조정", - "tRTW Fine Tune": "tRTW 미세 조정", - "t7 tWTR Fine Tune": "t7 tWTR 미세 조정", - "tWTR Fine Tune": "tWTR 미세 조정", - "Memory Latencies": "메모리 지연 시간", - "Read Latency": "읽기 지연 시간", - "Write Latency": "쓰기 지연 시간", - "CPU Boost Clock": "CPU 부스트 클럭", - "CPU UV": "CPU 언더볼트", - "CPU Unlock": "CPU 잠금 해제", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "CPU 최대 전압", - "CPU Max Clock": "CPU 최대 클럭", - "Extreme UV Table": "익스트림 테이블", - "CPU UV Table": "CPU 언더볼트 테이블", - "CPU Low UV": "CPU 저주파 언더볼트", - "CPU High UV": "CPU 고주파 언더볼트", - "CPU Low VMIN": "CPU 저주파 최소 전압", - "CPU High VMIN": "CPU 고주파 최소 전압", - "No Undervolt": "언더볼트 없음", - "SLT Table": "SLT 테이블", - "HiOPT Table": "HiOPT 테이블", - "GPU Undervolt Table": "GPU 언더볼트 테이블", - "GPU Minimum Voltage": "GPU 최소 전압", - "Calculate GPU Vmin": "GPU Vmin 계산", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "GPU 최대 전압", - "GPU Voltage Offset": "GPU 전압 오프셋", - "Do not override": "재정의하지 않음", - "Enabled (Default)": "활성화됨(기본값)", - "96.6% limit": "96.6% 한도", - "99.7% limit": "99.7% 한도", - "GPU Scheduling Override": "GPU 스케줄링 재정의", - "Official Service": "공식 서비스", - "GPU DVFS Mode": "GPU DVFS 모드", - "GPU DVFS Offset": "GPU DVFS 오프셋", - "GPU Voltage Table": "GPU 전압 테이블", - "GPU Custom Table (mV)": "GPU 사용자 정의 테이블(mV)", - "1075MHz without UV, 1152MHz on SLT": "UV 없이 1075MHz, SLT에서 1152MHz", - "or 1228MHz on HiOPT can cause ": "또는 HiOPT에서 1228MHz를 사용하면", - "permanent damage to your Switch!": "스위치가 영구적으로 손상될 수 있습니다!", - "921MHz without UV and 960MHz on": "UV가 없는 경우 921MHz, 켜진 경우에는 960MHz", - "SLT or HiOPT can cause ": "SLT 또는 HiOPT는 다음을 유발할 수 있습니다." -} diff --git a/dist/config/horizon-oc/lang/lang/nl.json b/dist/config/horizon-oc/lang/lang/nl.json deleted file mode 100644 index 1005d3c2..00000000 --- a/dist/config/horizon-oc/lang/lang/nl.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Informatie", - "IDDQ:": "IDDQ:", - "Module: ": "module:", - "sys-dock status:": "sys-dock-status:", - "SaltyNX status:": "SaltyNX-status:", - "RR Display status:": "RR Weergavestatus:", - "Wafer Position:": "Waferpositie:", - "Credits": "Kredieten", - "Developers": "Ontwikkelaars", - "Contributors": "Bijdragers", - "Testers": "Testers", - "Special Thanks": "Speciale dank", - "Unknown": "Onbekend", - "Installed": "Geïnstalleerd", - "Not Installed": "Niet geïnstalleerd", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "DE LICENTIE VOOR BIERWAREN", - "Default": "Standaard", - "Do Not Override": "Niet overschrijven", - "Disabled": "Uitgeschakeld", - "Enabled": "Ingeschakeld", - " \\ue0e3 Reset": "\\ue0e3 Opnieuw instellen", - "Display": "Weergave", - "Application changed\\n\\n": "Applicatie gewijzigd\\n\\n", - "The running application changed\\n\\n": "De actieve applicatie is gewijzigd\\n\\n", - "while editing was going on.": "terwijl er werd bewerkt.", - "Board": "Bord", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Kan geen verbinding maken met hoc-clk sysmodule.\\n\\n", - "Please make sure everything is\\n\\n": "Zorg ervoor dat alles in orde is\\n\\n", - "correctly installed and enabled.": "correct geïnstalleerd en ingeschakeld.", - "Fatal error": "Fatale fout", - "Temporary Overrides ": "Tijdelijke overschrijvingen", - "Sleep Mode": "Slaapmodus", - "Stock": "Voorraad", - "Dev OC": "Ontwikkelaar OC", - "Boost Mode": "Boost-modus", - "Safe Max": "Veilig Max", - "Unsafe Max": "OnveiligMax", - "Absolute Max": "Absoluut Max", - "Handheld Safe Max": "Handkluis Max", - "Enable": "Inschakelen", - "Edit App Profile": "App-profiel bewerken", - "Edit Global Profile": "Globaal profiel bewerken", - "Temporary Overrides": "Tijdelijke overschrijvingen", - "Settings": "Instellingen", - "About": "Over", - "Compiling with minimal features": "Compileren met minimale functies", - "General Settings": "Algemene instellingen", - "Governor Settings": "Gouverneur instellingen", - "Safety Settings": "Veiligheidsinstellingen", - "Save KIP Settings": "Sla KIP-instellingen op", - "RAM Settings": "RAM-instellingen", - "CPU Settings": "CPU-instellingen", - "GPU Settings": "GPU-instellingen", - "Display Settings": "Weergave-instellingen", - "Experimental": "Experimenteel", - "GPU Scheduling Override Method": "Methode voor het overschrijven van GPU-planning", - "can be dangerous and may cause": "kan gevaarlijk zijn en kan veroorzaken", - "damage to your battery or charger!": "schade aan uw accu of lader!", - "Charge Current Override": "Laadstroom overschrijven", - "RAM Voltage Display Mode": "Weergavemodus RAM-spanning", - "Polling Interval": "Polling-interval", - "CPU Governor Minimum Frequency": "Minimale frequentie CPU-regelaar", - "refresh rates may cause stress": "vernieuwingsfrequenties kunnen stress veroorzaken", - "or damage to your display! ": "of schade aan uw display!", - "Proceed at your own risk!": "Ga verder op eigen risico!", - "Max Handheld Display": "Maximaal handheld-display", - "Display Clock": "Klok weergeven", - "Official Rating": "Officiële beoordeling", - "TDP Threshold": "TDP-drempel", - "Power": "Macht", - "Thermal Throttle Limit": "Thermische gaslimiet", - "HP Mode": "HP-modus", - "Default (Mariko)": "Standaard (Mariko)", - "Default (Erista)": "Standaard (Erista)", - "Rating": "Beoordeling", - "Safe Max (Mariko)": "Veilig Max (Mariko)", - "Safe Max (Erista)": "Veilige Max (Erista)", - "RAM VDD2 Voltage": "RAM VDD2-spanning", - "Voltage": "Spanning", - "RAM VDDQ Voltage": "RAM VDDQ-spanning", - "RAM Frequency Editor": "RAM-frequentie-editor", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Hoge snelheid nodig!", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (vereist extreme snelheidsmeter/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (vereist extreme snelheidsmeter/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (vereist extreme snelheidsmeter/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (heeft een belachelijke snelheidsmeter/PLL nodig)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (heeft een belachelijke snelheidsmeter/PLL nodig)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (heeft een belachelijke snelheidsmeter/PLL nodig)", - "Ram Max Clock": "Ram Max-klok", - "RAM Latency Editor": "RAM-latentie-editor", - "RAM Timing Reductions": "RAM-timingreducties", - "Memory Timings": "Geheugentijden", - "Advanced": "Geavanceerd", - "t6 tRTW Fine Tune": "t6 tRTW Fijnafstemming", - "tRTW Fine Tune": "tRTW Fijnafstemming", - "t7 tWTR Fine Tune": "t7 tWTR Fijnafstemming", - "tWTR Fine Tune": "tWTR Fijnafstemming", - "Memory Latencies": "Geheugenlatenties", - "Read Latency": "Lees Latentie", - "Write Latency": "Schrijf latentie", - "CPU Boost Clock": "CPU-boostklok", - "CPU UV": "CPU-UV", - "CPU Unlock": "CPU-ontgrendeling", - "CPU VMIN": "CPU-VMIN", - "CPU Max Voltage": "Maximale CPU-spanning", - "CPU Max Clock": "CPU maximale klok", - "Extreme UV Table": "Extreme UV-tafel", - "CPU UV Table": "CPU UV-tabel", - "CPU Low UV": "CPU Lage UV", - "CPU High UV": "CPU Hoge UV", - "CPU Low VMIN": "CPU Lage VMIN", - "CPU High VMIN": "CPU Hoge VMIN", - "No Undervolt": "Geen ondervolt", - "SLT Table": "SLT-tabel", - "HiOPT Table": "HiOPT-tabel", - "GPU Undervolt Table": "GPU-undervolttabel", - "GPU Minimum Voltage": "GPU-minimale spanning", - "Calculate GPU Vmin": "Bereken GPU Vmin", - "GPU VMIN": "GPU-VMIN", - "GPU Maximum Voltage": "GPU maximale spanning", - "GPU Voltage Offset": "GPU-spanningsoffset", - "Do not override": "Niet overschrijven", - "Enabled (Default)": "Ingeschakeld (standaard)", - "96.6% limit": "96,6% limiet", - "99.7% limit": "99,7% limiet", - "GPU Scheduling Override": "GPU-planning negeren", - "Official Service": "Officiële dienst", - "GPU DVFS Mode": "GPU DVFS-modus", - "GPU DVFS Offset": "GPU DVFS-offset", - "GPU Voltage Table": "GPU-spanningstabel", - "GPU Custom Table (mV)": "Aangepaste GPU-tabel (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075MHz zonder UV, 1152MHz op SLT", - "or 1228MHz on HiOPT can cause ": "of 1228MHz op HiOPT kan dit veroorzaken", - "permanent damage to your Switch!": "blijvende schade aan uw Switch!", - "921MHz without UV and 960MHz on": "921MHz zonder UV en 960MHz aan", - "SLT or HiOPT can cause ": "SLT of HiOPT kunnen dit veroorzaken" -} diff --git a/dist/config/horizon-oc/lang/lang/pl.json b/dist/config/horizon-oc/lang/lang/pl.json deleted file mode 100644 index 1233aa93..00000000 --- a/dist/config/horizon-oc/lang/lang/pl.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Informacje", - "IDDQ:": "IDDQ:", - "Module: ": "Moduł:", - "sys-dock status:": "stan sys-dock:", - "SaltyNX status:": "Stan SaltyNX:", - "RR Display status:": "Stan wyświetlacza:", - "Wafer Position:": "Pozycja wafla:", - "Credits": "Kredyty", - "Developers": "Deweloperzy", - "Contributors": "Współautorzy", - "Testers": "Testery", - "Special Thanks": "Specjalne podziękowania", - "Unknown": "Nieznany", - "Installed": "Zainstalowany", - "Not Installed": "Nie zainstalowano", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "LICENCJA NA WYROBY PIWNE", - "Default": "Domyślne", - "Do Not Override": "Nie zastępuj", - "Disabled": "Niepełnosprawny", - "Enabled": "Włączone", - " \\ue0e3 Reset": "\\ue0e3 Zresetuj", - "Display": "Wyświetlacz", - "Application changed\\n\\n": "Aplikacja została zmieniona\\n\\n", - "The running application changed\\n\\n": "Działająca aplikacja została zmieniona\\n\\n", - "while editing was going on.": "podczas gdy edycja była w toku.", - "Board": "Deska", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Nie można połączyć się z modułem sysmodule hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Upewnij się, że wszystko jest\\n\\n", - "correctly installed and enabled.": "poprawnie zainstalowany i włączony.", - "Fatal error": "Fatalny błąd", - "Temporary Overrides ": "Tymczasowe nadpisania", - "Sleep Mode": "Tryb uśpienia", - "Stock": "Zapas", - "Dev OC": "Dev OC", - "Boost Mode": "Tryb wzmocnienia", - "Safe Max": "Bezpieczny maks", - "Unsafe Max": "Niebezpieczny maks", - "Absolute Max": "Absolutny maks", - "Handheld Safe Max": "Sejf ręczny Max", - "Enable": "Włącz", - "Edit App Profile": "Edytuj profil aplikacji", - "Edit Global Profile": "Edytuj profil globalny", - "Temporary Overrides": "Tymczasowe nadpisania", - "Settings": "Ustawienia", - "About": "O", - "Compiling with minimal features": "Kompilacja z minimalnymi funkcjami", - "General Settings": "Ustawienia ogólne", - "Governor Settings": "Ustawienia gubernatora", - "Safety Settings": "Ustawienia bezpieczeństwa", - "Save KIP Settings": "Zapisz ustawienia KIP", - "RAM Settings": "Ustawienia pamięci RAM", - "CPU Settings": "Ustawienia procesora", - "GPU Settings": "Ustawienia GPU", - "Display Settings": "Ustawienia wyświetlania", - "Experimental": "Eksperymentalny", - "GPU Scheduling Override Method": "Metoda obejścia harmonogramu GPU", - "can be dangerous and may cause": "może być niebezpieczne i powodować", - "damage to your battery or charger!": "uszkodzenie akumulatora lub ładowarki!", - "Charge Current Override": "Obejście prądu ładowania", - "RAM Voltage Display Mode": "Tryb wyświetlania napięcia RAM", - "Polling Interval": "Interwał odpytywania", - "CPU Governor Minimum Frequency": "Minimalna częstotliwość regulatora procesora", - "refresh rates may cause stress": "częstotliwości odświeżania mogą powodować stres", - "or damage to your display! ": "lub uszkodzenie wyświetlacza!", - "Proceed at your own risk!": "Postępuj na własne ryzyko!", - "Max Handheld Display": "Maksymalny wyświetlacz ręczny", - "Display Clock": "Wyświetl zegar", - "Official Rating": "Oficjalna ocena", - "TDP Threshold": "Próg TDP", - "Power": "Moc", - "Thermal Throttle Limit": "Limit przepustnicy termicznej", - "HP Mode": "Tryb HP", - "Default (Mariko)": "Domyślny (Mariko)", - "Default (Erista)": "Domyślny (Erista)", - "Rating": "Ocena", - "Safe Max (Mariko)": "Bezpieczny Max (Mariko)", - "Safe Max (Erista)": "Bezpieczny Max (Erista)", - "RAM VDD2 Voltage": "Napięcie pamięci RAM VDD2", - "Voltage": "Napięcie", - "RAM VDDQ Voltage": "Napięcie RAM VDDQ", - "RAM Frequency Editor": "Edytor częstotliwości RAM", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Potrzebna duża prędkość!", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (wymaga ekstremalnego Speedo/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (wymaga ekstremalnego Speedo/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (wymaga ekstremalnego Speedo/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (potrzebuje śmiesznego Speedo/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (potrzebuje śmiesznego Speedo/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (potrzebuje śmiesznego Speedo/PLL)", - "Ram Max Clock": "Zegar Ram Max", - "RAM Latency Editor": "Edytor opóźnień pamięci RAM", - "RAM Timing Reductions": "Zmniejszenie taktowania pamięci RAM", - "Memory Timings": "Taktowanie pamięci", - "Advanced": "Zaawansowane", - "t6 tRTW Fine Tune": "t6 tRTW Dostrój", - "tRTW Fine Tune": "tRTW Dostosuj", - "t7 tWTR Fine Tune": "t7 tWTR Dostosuj", - "tWTR Fine Tune": "tWTR Dostosuj", - "Memory Latencies": "Opóźnienia pamięci", - "Read Latency": "Przeczytaj Opóźnienie", - "Write Latency": "Opóźnienie zapisu", - "CPU Boost Clock": "Zegar wzmocnienia procesora", - "CPU UV": "Procesor UV", - "CPU Unlock": "Odblokowanie procesora", - "CPU VMIN": "Procesor VMIN", - "CPU Max Voltage": "Maksymalne napięcie procesora", - "CPU Max Clock": "Maks. zegar procesora", - "Extreme UV Table": "Ekstremalny stół UV", - "CPU UV Table": "Tabela UV procesora", - "CPU Low UV": "Niskie promieniowanie UV procesora", - "CPU High UV": "Wysokie promieniowanie UV procesora", - "CPU Low VMIN": "Niski poziom VMIN procesora", - "CPU High VMIN": "Wysoki poziom VMIN procesora", - "No Undervolt": "Brak Undervolta", - "SLT Table": "Stół SLT", - "HiOPT Table": "Stół HiOPT", - "GPU Undervolt Table": "Tabela niedoboru napięcia GPU", - "GPU Minimum Voltage": "Minimalne napięcie procesora graficznego", - "Calculate GPU Vmin": "Oblicz Vmin GPU", - "GPU VMIN": "VMIN GPU", - "GPU Maximum Voltage": "Maksymalne napięcie procesora graficznego", - "GPU Voltage Offset": "Przesunięcie napięcia GPU", - "Do not override": "Nie zastępuj", - "Enabled (Default)": "Włączone (domyślnie)", - "96.6% limit": "Limit 96,6%.", - "99.7% limit": "Limit 99,7%.", - "GPU Scheduling Override": "Zastąpienie harmonogramu GPU", - "Official Service": "Oficjalny serwis", - "GPU DVFS Mode": "Tryb DVFS procesora graficznego", - "GPU DVFS Offset": "Przesunięcie DVFS GPU", - "GPU Voltage Table": "Tabela napięć GPU", - "GPU Custom Table (mV)": "Tabela niestandardowa GPU (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075 MHz bez UV, 1152 MHz na SLT", - "or 1228MHz on HiOPT can cause ": "lub 1228 MHz na HiOPT może powodować", - "permanent damage to your Switch!": "trwałe uszkodzenie Switcha!", - "921MHz without UV and 960MHz on": "921 MHz bez UV i 960 MHz włączone", - "SLT or HiOPT can cause ": "Przyczyną mogą być SLT lub HiOPT" -} diff --git a/dist/config/horizon-oc/lang/lang/pt.json b/dist/config/horizon-oc/lang/lang/pt.json deleted file mode 100644 index fbddab17..00000000 --- a/dist/config/horizon-oc/lang/lang/pt.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Informação", - "IDDQ:": "IDDQ:", - "Module: ": "Módulo:", - "sys-dock status:": "status do dock do sistema:", - "SaltyNX status:": "Status do SaltyNX:", - "RR Display status:": "Status de exibição do RR:", - "Wafer Position:": "Posição da bolacha:", - "Credits": "Créditos", - "Developers": "Desenvolvedores", - "Contributors": "Colaboradores", - "Testers": "Testadores", - "Special Thanks": "Agradecimentos especiais", - "Unknown": "Desconhecido", - "Installed": "Instalado", - "Not Installed": "Não instalado", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "A LICENÇA DE CERVEJA", - "Default": "Padrão", - "Do Not Override": "Não substituir", - "Disabled": "Desativado", - "Enabled": "Habilitado", - " \\ue0e3 Reset": "\\ue0e3 Redefinir", - "Display": "Exibição", - "Application changed\\n\\n": "Aplicativo alterado\\n\\n", - "The running application changed\\n\\n": "O aplicativo em execução foi alterado\\n\\n", - "while editing was going on.": "enquanto a edição estava acontecendo.", - "Board": "Conselho", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Não foi possível conectar-se ao sysmodule hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Verifique se tudo está\\n\\n", - "correctly installed and enabled.": "corretamente instalado e ativado.", - "Fatal error": "Erro fatal", - "Temporary Overrides ": "Substituições temporárias", - "Sleep Mode": "Modo de suspensão", - "Stock": "Estoque", - "Dev OC": "Desenvolvedor OC", - "Boost Mode": "Modo de reforço", - "Safe Max": "Máx. Seguro", - "Unsafe Max": "Máximo inseguro", - "Absolute Max": "Máximo absoluto", - "Handheld Safe Max": "Portátil Seguro Máx.", - "Enable": "Habilitar", - "Edit App Profile": "Editar perfil do aplicativo", - "Edit Global Profile": "Editar perfil global", - "Temporary Overrides": "Substituições temporárias", - "Settings": "Configurações", - "About": "Sobre", - "Compiling with minimal features": "Compilando com recursos mínimos", - "General Settings": "Configurações Gerais", - "Governor Settings": "Configurações do Governador", - "Safety Settings": "Configurações de segurança", - "Save KIP Settings": "Salvar configurações KIP", - "RAM Settings": "Configurações de RAM", - "CPU Settings": "Configurações de CPU", - "GPU Settings": "Configurações de GPU", - "Display Settings": "Configurações de exibição", - "Experimental": "Experimental", - "GPU Scheduling Override Method": "Método de substituição de agendamento de GPU", - "can be dangerous and may cause": "pode ser perigoso e causar", - "damage to your battery or charger!": "danos à sua bateria ou carregador!", - "Charge Current Override": "Substituição de corrente de carga", - "RAM Voltage Display Mode": "Modo de exibição de tensão RAM", - "Polling Interval": "Intervalo de votação", - "CPU Governor Minimum Frequency": "Frequência Mínima do Governador da CPU", - "refresh rates may cause stress": "taxas de atualização podem causar estresse", - "or damage to your display! ": "ou danos ao seu monitor!", - "Proceed at your own risk!": "Prossiga por sua conta e risco!", - "Max Handheld Display": "Visor portátil máximo", - "Display Clock": "Exibir relógio", - "Official Rating": "Classificação Oficial", - "TDP Threshold": "Limite de TDP", - "Power": "Poder", - "Thermal Throttle Limit": "Limite de aceleração térmica", - "HP Mode": "Modo HP", - "Default (Mariko)": "Padrão (Mariko)", - "Default (Erista)": "Padrão (Erista)", - "Rating": "Avaliação", - "Safe Max (Mariko)": "Máximo Seguro (Mariko)", - "Safe Max (Erista)": "Seguro Max (Erista)", - "RAM VDD2 Voltage": "Tensão RAM VDD2", - "Voltage": "Tensão", - "RAM VDDQ Voltage": "Tensão RAM VDDQ", - "RAM Frequency Editor": "Editor de frequência RAM", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Alta velocidade necessária!", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (precisa de Speedo/PLL extremo)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (precisa de Speedo/PLL extremo)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (precisa de Speedo/PLL extremo)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (precisa de Speedo/PLL ridículo)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (precisa de Speedo/PLL ridículo)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (precisa de Speedo/PLL ridículo)", - "Ram Max Clock": "Relógio máximo de Ram", - "RAM Latency Editor": "Editor de latência de RAM", - "RAM Timing Reductions": "Reduções de tempo de RAM", - "Memory Timings": "Tempos de memória", - "Advanced": "Avançado", - "t6 tRTW Fine Tune": "t6 tRTW Ajuste fino", - "tRTW Fine Tune": "Ajuste fino tRTW", - "t7 tWTR Fine Tune": "t7 tWTR Ajuste fino", - "tWTR Fine Tune": "Ajuste fino tWTR", - "Memory Latencies": "Latências de memória", - "Read Latency": "Latência de leitura", - "Write Latency": "Latência de gravação", - "CPU Boost Clock": "Relógio de aumento da CPU", - "CPU UV": "UV da CPU", - "CPU Unlock": "Desbloqueio da CPU", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "Tensão máxima da CPU", - "CPU Max Clock": "Relógio máximo da CPU", - "Extreme UV Table": "Mesa UV Extrema", - "CPU UV Table": "Tabela UV da CPU", - "CPU Low UV": "UV baixo da CPU", - "CPU High UV": "CPU alta UV", - "CPU Low VMIN": "CPU baixa VMIN", - "CPU High VMIN": "VMIN alto da CPU", - "No Undervolt": "Sem subtensão", - "SLT Table": "Tabela SLT", - "HiOPT Table": "Tabela HiOPT", - "GPU Undervolt Table": "Tabela de subtensão da GPU", - "GPU Minimum Voltage": "Tensão mínima da GPU", - "Calculate GPU Vmin": "Calcular Vmin da GPU", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "Tensão máxima da GPU", - "GPU Voltage Offset": "Compensação de tensão da GPU", - "Do not override": "Não substitua", - "Enabled (Default)": "Habilitado (padrão)", - "96.6% limit": "Limite de 96,6%", - "99.7% limit": "Limite de 99,7%", - "GPU Scheduling Override": "Substituição de agendamento de GPU", - "Official Service": "Serviço Oficial", - "GPU DVFS Mode": "Modo GPU DVFS", - "GPU DVFS Offset": "Deslocamento DVFS da GPU", - "GPU Voltage Table": "Tabela de tensão da GPU", - "GPU Custom Table (mV)": "Tabela personalizada de GPU (mV)", - "1075MHz without UV, 1152MHz on SLT": "1075 MHz sem UV, 1152 MHz em SLT", - "or 1228MHz on HiOPT can cause ": "ou 1228 MHz em HiOPT pode causar", - "permanent damage to your Switch!": "danos permanentes ao seu Switch!", - "921MHz without UV and 960MHz on": "921 MHz sem UV e 960 MHz ativado", - "SLT or HiOPT can cause ": "SLT ou HiOPT podem causar" -} diff --git a/dist/config/horizon-oc/lang/lang/ru.json b/dist/config/horizon-oc/lang/lang/ru.json deleted file mode 100644 index 7edb4408..00000000 --- a/dist/config/horizon-oc/lang/lang/ru.json +++ /dev/null @@ -1,179 +0,0 @@ -{ - "Information": "Информация", - "IDDQ:": "IDDQ:", - "Module: ": "Module:", - "sys-dock status:": "Статус sys-dock:", - "SaltyNX status:": "Статус SaltyNX:", - "RR Display status:": "Статус RR Display:", - "Wafer Position:": "Wafer Position:", - "Credits": "Благодарности", - "Developers": "Разработчики", - "Contributors": "Внесли вклад", - "Testers": "Тестеры", - "Special Thanks": "Особая благодарность", - "Unknown": "Неизвестно", - "Installed": "Установлено", - "Not Installed": "Не установлено", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "BEER-WARE LICENSE", - "Default": "По умолчанию", - "Do Not Override": "Не менять", - "Disabled": "Отключено", - "Enabled": "Включено", - "Auto": "Авто", - " \\ue0e3 Reset": "\\ue0e3 Сброс", - "Display": "Дисплей", - "Application changed\\n\\n": "Приложение изменено\\n\\n", - "The running application changed\\n\\n": "Запущенное приложение изменилось\\n\\n", - "while editing was going on.": "пока шло редактирование.", - "Board": "Board", - "%u.%u%u mV": "%u.%u%u мВ", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к сис-модулю hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все\\n\\n", - "correctly installed and enabled.": "правильно установлено и включено.", - "Fatal error": "Фатальная ошибка", - "Temporary Overrides ": "Временный профиль", - "Sleep Mode": "Спящий режим", - "Stock": "Стандарт", - "Dev OC": "Разгон dev-кита", - "Boost Mode": "Режим буста", - "Safe Max": "Безопасный макс.", - "Unsafe Max": "Опасный макс.", - "Absolute Max": "Абсолютный макс.", - "Handheld Safe Max": "Портативный безопасный макс.", - "Enable": "Включено", - "Edit App Profile": "Профиль приложения", - "Edit Global Profile": "Глобальный профиль", - "Temporary Overrides": "Временный профиль", - "Settings": "Настройки", - "About": "Сведения", - "Compiling with minimal features": "Собрано с урезанием функций", - "\uE150 Settings marked in blue": "Настройки помеченные синим", - "don't require a reboot to apply!": "Синие настройки применяются сразу!", - "General Settings": "Основные настройки", - "Governor Settings": "Настройки говернора", - "Safety Settings": "Настройки безопасности", - "Save KIP Settings": "Сохранить настройки KIP", - "RAM Settings": "Настройки RAM", - "CPU Settings": "Настройки CPU", - "GPU Settings": "Настройки GPU", - "Display Settings": "Настройки дисплея", - "Experimental": "Экспериментальный", - "Enable Experimental Settings": "Экспериментальные настройки", - "\uE150 Experimental Settings are incomplete ": "Экспериментальные настройки не закончены", - "and may not work correctly or at all!": "Экспериментальные настройки не", - "Here be dragons!": "закончены и могут не работать!", - "Experimental Settings": "Экспериментальные", - "Live CPU Undervolt": "Мгновенный андервольт CPU", - "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU", - "Memory Frequency Measurement Mode": "Режим измерения частоты RAM", - "\uE150 Overriding the charge current": "Перезапись зарядного тока может", - "can be dangerous and may cause": "Перезапись зарядного тока может", - "damage to your battery or charger!": "повреждить аккумулятор или зарядку!", - "Charge Current Override": "Перезапись зарядного тока", - "RAM Voltage Display Mode": "Показ вольтажа RAM", - "RAM Display Unit": "Показ единицы измерения RAM", - "Polling Interval": "Интервал опроса", - "CPU Governor Minimum Frequency": "Минимальная частота говернора CPU", - "\uE150 Usage of unsafe display": "\uE150 Использование не безопасной", - "refresh rates may cause stress": "Не безопасная частота", - "or damage to your display! ": "может повредить ваш экран", - "Proceed at your own risk!": "Действуйте на свой страх и риск!", - "Max Handheld Display Hz": "Макс. в портативе", - "Display Clock": "Частота экрана", - "Official Rating": "Официальный рейтинг", - "TDP Threshold": "Порог TDP", - "Power": "Мощность", - "Thermal Throttle Limit": "Предел троттлинга", - "HP Mode": "Режим HP", - "Default (Mariko)": "По умолчанию (M)", - "Default (Erista)": "По умолчанию (E)", - "Rating": "Рейтинг", - "Safe Max (Mariko)": "Сейф Макс (M)", - "Safe Max (Erista)": "Сейф Макс (E)", - "RAM VDD2 Voltage": "Вольтаж VDD2", - "Voltage": "Вольтаж", - "RAM VDDQ Voltage": "Вольтаж VDDQ", - "Step Mode": "Частотный шаг", - "RAM Frequency Editor": "Редактор частоты", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Для высоких speedo", - "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (нужны невероятные speedo/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (нужны невероятные speedo/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (нужны невероятные speedo/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (нужны безумные speedo/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (нужны безумные speedo/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (нужны безумные speedo/PLL)", - "Ram Max Clock": "Макс. частота", - "RAM Latency Editor": "Редактор задержек", - "1333 Latency Max": "1333 задержка", - "1600 Latency Max": "1600 задержка", - "1866 Latency Max": "1866 задержка", - "2133 Latency Max": "2133 задержка", - "RAM Timing Reductions": "Настройка таймингов", - "Memory Timings": "Тайминги RAM", - "RAM-Timing tBreak": "Разбитие таблицы таймингов", - "Memory": "RAM", - "mem": "RAM", - "MEM": "RAM", - "Profile": "Профиль", - "Governor": "Говернор", - "Advanced": "Расширенные", - "Docked": "В доке", - "Handheld": "Портатив", - "Charging": "На зарядке", - "USB Charger": "USB Зарядка", - "PD Charger": "PD Зарядка", - "Handheld TDP": "TPD в портативе", - "Thermal Throttle": "Троттлинг", - "Uncapped Clocks": "Максимальные частоты", - "SoC DVB Shift": "SoC DVB сдвиг", - "SoC Max Volt": "Макс. вольт SoC", - "Overwrite Boost Mode": "Перезапись буста", - "Display Refresh Rate Changing": "Изменение частоты экрана", - "Low t6 tRTW": "Нижний t6 tRTW", - "Low t7 tWTR": "Нижний t7 tWTR", - "1333WL t2 RP Cap": "Предел 1333WL t2 RP", - "t6 tRTW Fine Tune": " Точная настройка t6 tRTW", - "tRTW Fine Tune": " Точная настройка tRTW", - "t7 tWTR Fine Tune": " Точная настройка t7 tWTR", - "tWTR Fine Tune": " Точная настройка tWTR", - "Memory Latencies": "Задержки памяти", - "Read Latency": "Задержка чтения", - "Write Latency": "Задержка записи", - "CPU Boost Clock": "Частота буста", - "CPU UV": "Андервольт CPU", - "CPU Unlock": "Разблокировка CPU", - "CPU VMIN": "Мин. вольтаж", - "CPU Max Voltage": "Макс. вольтаж", - "CPU Max Clock": "Макс. частота", - "Extreme UV Table": "Экстримальная", - "CPU UV Table": "Таблица андервольта", - "CPU Low UV": "Андервольт нижних частот", - "CPU High UV": "Андервольт верхних частот", - "CPU Low VMIN": "Мин. вольт. нижних частот", - "CPU High VMIN": "Мин. вольт. верхних частот", - "No Undervolt": "Без андервольта", - "SLT Table": "Таблица SLT", - "HiOPT Table": "Таблица HiOPT", - "GPU Undervolt Table": "Таблица андервольта", - "GPU Minimum Voltage": "Мин. вольтаж", - "Calculate GPU Vmin": "Вычисление мин. вольтаж", - "GPU VMIN": "Мин. вольтаж", - "GPU Maximum Voltage": "Макс. вольтаж", - "GPU Voltage Offset": "Смещение вольтажа", - "Do not override": "Не менять", - "Enabled (Default)": "Включено (По умолчанию)", - "96.6% limit": "≤96,6%", - "99.7% limit": "≤99,7%", - "GPU Scheduling Override": "Перезапись планировщика", - "Official Service": "Официальная служба", - "GPU DVFS Mode": "Режим DVFS", - "GPU DVFS Offset": "Смещение DVFS", - "GPU Voltage Table": "Таблица вольтажей", - "GPU Custom Table (mV)": "Ручная таблица (мВ)", - "\uE150 Setting GPU Clocks past": "\uE150 Установка частот GPU выше", - "1228MHz without a proper undervolt": "Установка частот GPU выше 1228 МГц", - "can cause degradation or damage": "без хорошего андервольта может", - "to your console!": "повредить вашу консоль!" -} diff --git a/dist/config/horizon-oc/lang/lang/uk.json b/dist/config/horizon-oc/lang/lang/uk.json deleted file mode 100644 index c0239f8a..00000000 --- a/dist/config/horizon-oc/lang/lang/uk.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "Інформація", - "IDDQ:": "IDDQ:", - "Module: ": "Модуль:", - "sys-dock status:": "стан sys-dock:", - "SaltyNX status:": "Статус SaltyNX:", - "RR Display status:": "Статус дисплея RR:", - "Wafer Position:": "Позиція пластини:", - "Credits": "Кредити", - "Developers": "Розробники", - "Contributors": "Дописувачі", - "Testers": "Тестери", - "Special Thanks": "Особлива подяка", - "Unknown": "Невідомий", - "Installed": "встановлено", - "Not Installed": "Не встановлено", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "ЛІЦЕНЗІЯ НА ПИВНИЙ ПОСУД", - "Default": "За замовчуванням", - "Do Not Override": "Не перевизначати", - "Disabled": "Вимкнено", - "Enabled": "Увімкнено", - " \\ue0e3 Reset": "\\ue0e3 Скидання", - "Display": "Дисплей", - "Application changed\\n\\n": "Додаток змінено\\n\\n", - "The running application changed\\n\\n": "Запущена програма змінена\\n\\n", - "while editing was going on.": "поки йшло редагування.", - "Board": "дошка", - "%u.%u%u mV": "%u.%u%u мВ", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Не вдалося підключитися до системного модуля hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Переконайтеся, що все\\n\\n", - "correctly installed and enabled.": "правильно встановлено та включено.", - "Fatal error": "Фатальна помилка", - "Temporary Overrides ": "Тимчасові перевизначення", - "Sleep Mode": "Режим сну", - "Stock": "Запас", - "Dev OC": "Розробник OC", - "Boost Mode": "Режим посилення", - "Safe Max": "Безпечний макс", - "Unsafe Max": "Небезпечний макс", - "Absolute Max": "Абсолютний макс", - "Handheld Safe Max": "Портативний сейф Макс", - "Enable": "Увімкнути", - "Edit App Profile": "Редагувати профіль програми", - "Edit Global Profile": "Редагувати глобальний профіль", - "Temporary Overrides": "Тимчасові перевизначення", - "Settings": "Налаштування", - "About": "про", - "Compiling with minimal features": "Компіляція з мінімальними можливостями", - "General Settings": "Загальні налаштування", - "Governor Settings": "Налаштування губернатора", - "Safety Settings": "Налаштування безпеки", - "Save KIP Settings": "Зберегти налаштування KIP", - "RAM Settings": "Налаштування оперативної пам'яті", - "CPU Settings": "Налаштування ЦП", - "GPU Settings": "Налаштування GPU", - "Display Settings": "Налаштування дисплея", - "Experimental": "Експериментальний", - "GPU Scheduling Override Method": "Метод перевизначення планування GPU", - "can be dangerous and may cause": "може бути небезпечним і може спричинити", - "damage to your battery or charger!": "пошкодження акумулятора або зарядного пристрою!", - "Charge Current Override": "Перевизначення струму заряду", - "RAM Voltage Display Mode": "Режим відображення напруги RAM", - "Polling Interval": "Інтервал опитування", - "CPU Governor Minimum Frequency": "Мінімальна частота регулятора ЦП", - "refresh rates may cause stress": "частоти оновлення можуть викликати стрес", - "or damage to your display! ": "або пошкодження дисплея!", - "Proceed at your own risk!": "Продовжуйте на свій страх і ризик!", - "Max Handheld Display": "Максимальний портативний дисплей", - "Display Clock": "Відображення годинника", - "Official Rating": "Офіційний рейтинг", - "TDP Threshold": "Поріг TDP", - "Power": "потужність", - "Thermal Throttle Limit": "Термічний дросельний ліміт", - "HP Mode": "Режим HP", - "Default (Mariko)": "За замовчуванням (Маріко)", - "Default (Erista)": "За замовчуванням (Erista)", - "Rating": "Рейтинг", - "Safe Max (Mariko)": "Сейф Макс (Маріко)", - "Safe Max (Erista)": "Сейф Макс (Еріста)", - "RAM VDD2 Voltage": "Напруга RAM VDD2", - "Voltage": "Напруга", - "RAM VDDQ Voltage": "Напруга RAM VDDQ", - "RAM Frequency Editor": "Редактор частоти оперативної пам'яті", - "JEDEC.": "JEDEC.", - "High speedo needed!": "Потрібна висока швидкість!", - "3333MHz (Needs extreme Speedo/PLL)": "3333 МГц (потрібна екстремальна швидкість/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 МГц (потрібна екстремальна швидкість/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 МГц (потрібна екстремальна швидкість/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 МГц (потрібен смішний Speedo/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 МГц (потрібен смішний Speedo/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 МГц (потрібен смішний Speedo/PLL)", - "Ram Max Clock": "Годинник Ram Max", - "RAM Latency Editor": "Редактор затримки оперативної пам'яті", - "RAM Timing Reductions": "Скорочення оперативної пам'яті", - "Memory Timings": "Таймінг пам'яті", - "Advanced": "Просунутий", - "t6 tRTW Fine Tune": "t6 tRTW Точне налаштування", - "tRTW Fine Tune": "Точне налаштування tRTW", - "t7 tWTR Fine Tune": "t7 tWTR Точне налаштування", - "tWTR Fine Tune": "Точна настройка tWTR", - "Memory Latencies": "Затримки пам'яті", - "Read Latency": "Прочитати затримку", - "Write Latency": "Затримка запису", - "CPU Boost Clock": "CPU Boost Clock", - "CPU UV": "CPU UV", - "CPU Unlock": "Розблокування ЦП", - "CPU VMIN": "CPU VMIN", - "CPU Max Voltage": "Максимальна напруга ЦП", - "CPU Max Clock": "Максимальна частота ЦП", - "Extreme UV Table": "Екстремальний ультрафіолетовий стіл", - "CPU UV Table": "CPU UV Таблиця", - "CPU Low UV": "CPU Low UV", - "CPU High UV": "CPU High UV", - "CPU Low VMIN": "CPU Low VMIN", - "CPU High VMIN": "CPU High VMIN", - "No Undervolt": "Без андервольта", - "SLT Table": "Таблиця SLT", - "HiOPT Table": "Таблиця HiOPT", - "GPU Undervolt Table": "Таблиця зниження напруги GPU", - "GPU Minimum Voltage": "Мінімальна напруга GPU", - "Calculate GPU Vmin": "Розрахувати GPU Vmin", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "Максимальна напруга GPU", - "GPU Voltage Offset": "Зсув напруги GPU", - "Do not override": "Не перевизначати", - "Enabled (Default)": "Увімкнено (за замовчуванням)", - "96.6% limit": "96,6% обмеження", - "99.7% limit": "Обмеження 99,7%.", - "GPU Scheduling Override": "Перевизначення планування GPU", - "Official Service": "Офіційний сервіс", - "GPU DVFS Mode": "Режим GPU DVFS", - "GPU DVFS Offset": "GPU DVFS Offset", - "GPU Voltage Table": "Таблиця напруги GPU", - "GPU Custom Table (mV)": "Спеціальна таблиця GPU (мВ)", - "1075MHz without UV, 1152MHz on SLT": "1075 МГц без УФ, 1152 МГц на SLT", - "or 1228MHz on HiOPT can cause ": "або 1228 МГц на HiOPT може спричинити", - "permanent damage to your Switch!": "незворотне пошкодження вашого комутатора!", - "921MHz without UV and 960MHz on": "921 МГц без УФ і 960 МГц увімкнено", - "SLT or HiOPT can cause ": "SLT або HiOPT можуть спричинити" -} diff --git a/dist/config/horizon-oc/lang/lang/zh-cn.json b/dist/config/horizon-oc/lang/lang/zh-cn.json deleted file mode 100644 index 53989929..00000000 --- a/dist/config/horizon-oc/lang/lang/zh-cn.json +++ /dev/null @@ -1,157 +0,0 @@ -{ - "Information": "信息", - "IDDQ:": "IDDQ:", - "Module: ": "模块: ", - "sys-dock status:": "sys-dock 状态:", - "SaltyNX status:": "SaltyNX 状态:", - "RR Display status:": "RR 显示状态:", - "Wafer Position:": "晶圆位置:", - "Credits": "致谢", - "Developers": "开发者", - "Contributors": "贡献者", - "Testers": "测试者", - "Special Thanks": "特别感谢", - "Unknown": "未知", - "Installed": "已安装", - "Not Installed": "未安装", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "啤酒软件许可协议", - "Default": "默认", - "Do Not Override": "不修改", - "Disabled": "已禁用", - "Enabled": "已启用", - " \\ue0e3 Reset": " \\ue0e3 重置", - "Display": "显示", - "Application changed\\n\\n": "应用已变更\\n\\n", - "The running application changed\\n\\n": "正在运行的应用已变更\\n\\n", - "while editing was going on.": "编辑过程中发生变更。", - "Board": "主板", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接到 hoc-clk 系统模块。\\n\\n", - "Please make sure everything is\\n\\n": "请确保所有内容均已\\n\\n", - "correctly installed and enabled.": "正确安装并启用。", - "Fatal error": "致命错误", - "Temporary Overrides ": "临时配置 ", - "Sleep Mode": "睡眠模式", - "Stock": "原厂默认", - "Dev OC": "开发者超频", - "Boost Mode": "加速模式", - "Safe Max": "安全最大值", - "Unsafe Max": "危险最大值", - "Absolute Max": "绝对最大值", - "Handheld Safe Max": "掌机模式安全最大值", - "Enable": "启用", - "Edit App Profile": "编辑应用配置", - "Edit Global Profile": "编辑全局配置", - "Temporary Overrides": "临时配置", - "Settings": "设置", - "About": "关于", - "Compiling with minimal features": "以最小功能编译", - "General Settings": "通用设置", - "Governor Settings": "调频器设置", - "Safety Settings": "安全设置", - "Save KIP Settings": "保存 KIP 设置", - "RAM Settings": "内存设置", - "CPU Settings": "CPU 设置", - "GPU Settings": "GPU 设置", - "Display Settings": "显示设置", - "Experimental": "实验性功能", - "GPU Scheduling Override Method": "GPU 调度覆盖方式", - "can be dangerous and may cause": "存在风险，可能导致", - "damage to your battery or charger!": "电池或充电器损坏！", - "Charge Current Override": "充电电流修改", - "RAM Voltage Display Mode": "内存电压显示模式", - "Polling Interval": "刷新间隔", - "CPU Governor Minimum Frequency": "CPU 调频器最低频率", - "\uE150 Usage of unsafe display": "\uE150 不安全的显示屏", - "refresh rates may cause stress": "刷新率可能会对", - "or damage to your display! ": "显示屏造成压力或损坏！ ", - "Proceed at your own risk!": "操作风险自负！", - "Max Handheld Display": "掌机模式最大显示率", - "Display Clock": "显示时钟", - "Official Rating": "官方额定值", - "TDP Threshold": "TDP 阈值", - "Power": "电源", - "Thermal Throttle Limit": "温控设置", - "HP Mode": "高性能模式", - "Default (Mariko)": "默认 (Mariko)", - "Default (Erista)": "默认 (Erista)", - "Rating": "额定值", - "Safe Max (Mariko)": "安全最大值 (Mariko)", - "Safe Max (Erista)": "安全最大值 (Erista)", - "RAM VDD2 Voltage": "内存 VDD2 电压", - "Voltage": "电压", - "RAM VDDQ Voltage": "内存 VDDQ 电压", - "RAM Frequency Editor": "内存频率编辑器", - "JEDEC.": "JEDEC 标准。", - "High speedo needed!": "需要高 Speedo 配置！", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极限 Speedo/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极限 Speedo/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极限 Speedo/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极端 Speedo/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极端 Speedo/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极端 Speedo/PLL)", - "Ram Max Clock": "内存最大频率", - "RAM Latency Editor": "内存延迟编辑器", - "RAM Timing Reductions": "内存时序优化", - "Memory Timings": "内存时序", - "Memory": "内存", - "mem": "内存", - "Governor": "调频器", - "Advanced": "高级", - "Docked": "底座模式", - "Handheld": "掌机模式", - "Charging": "充电中", - "USB Charger": "USB 充电器", - "PD Charger": "PD 充电器", - "Handheld TDP": "掌机模式功耗限制", - "Thermal Throttle": "温度控制", - "Uncapped Clocks": "解除频率上限", - "Soc DVB Shift": "SoC DVB偏移", - "Overwrite Boost Mode": "接管官方CPU调度", - "Display Refresh Rate Changing": "显示刷新率变更", - "t6 tRTW Fine Tune": "t6 tRTW 微调", - "tRTW Fine Tune": "tRTW 微调", - "t7 tWTR Fine Tune": "t7 tWTR 微调", - "tWTR Fine Tune": "tWTR 微调", - "Memory Latencies": "内存延迟", - "Read Latency": "读取延迟", - "Write Latency": "写入延迟", - "CPU Boost Clock": "CPU 超频频率", - "CPU UV": "CPU 降压", - "CPU Unlock": "CPU 解锁", - "CPU VMIN": "CPU 最低电压", - "CPU Max Voltage": "CPU 最大电压", - "CPU Max Clock": "CPU 最大频率", - "Extreme UV Table": "极限降压表", - "CPU UV Table": "CPU 降压表", - "CPU Low UV": "CPU 低压降压", - "CPU High UV": "CPU 高压降压", - "CPU Low VMIN": "CPU 低压最低电压", - "CPU High VMIN": "CPU 高压最低电压", - "No Undervolt": "不降压", - "SLT Table": "SLT 表", - "HiOPT Table": "HiOPT 表", - "GPU Undervolt Table": "GPU 降压表", - "GPU Minimum Voltage": "GPU 最低电压", - "Calculate GPU Vmin": "计算 GPU 最低电压", - "GPU VMIN": "GPU 最低电压", - "GPU Maximum Voltage": "GPU 最大电压", - "GPU Voltage Offset": "GPU 电压偏移", - "Do not override": "不修改", - "Enabled (Default)": "已启用 (默认)", - "96.6% limit": "96.6% 限制", - "99.7% limit": "99.7% 限制", - "GPU Scheduling Override": "GPU 调度修改", - "Official Service": "官方服务", - "GPU DVFS Mode": "GPU DVFS 模式", - "GPU DVFS Offset": "GPU DVFS 偏移", - "GPU Voltage Table": "GPU 电压表", - "GPU Custom Table (mV)": "GPU 自定义表 (mV)", - "\uE150 Setting GPU Clocks past": "\uE150 将 GPU 频率设置超过", - "1075MHz without UV, 1152MHz on SLT": "1075MHz 无降压，SLT 表下 1152MHz", - "or 1228MHz on HiOPT can cause ": "或 HiOPT 表下 1228MHz 可能导致 ", - "permanent damage to your Switch!": "Switch 永久损坏！", - "921MHz without UV and 960MHz on": "921MHz 无降压，SLT/HiOPT 表下 960MHz", - "SLT or HiOPT can cause ": "可能导致 " -} diff --git a/dist/config/horizon-oc/lang/lang/zh-tw.json b/dist/config/horizon-oc/lang/lang/zh-tw.json deleted file mode 100644 index 5a8a5dfa..00000000 --- a/dist/config/horizon-oc/lang/lang/zh-tw.json +++ /dev/null @@ -1,141 +0,0 @@ -{ - "Information": "資訊", - "IDDQ:": "國際電話號碼：", - "Module: ": "模組：", - "sys-dock status:": "系統塢站狀態：", - "SaltyNX status:": "SaltyNX 狀態：", - "RR Display status:": "RR 顯示狀態：", - "Wafer Position:": "晶圓位置：", - "Credits": "製作人員", - "Developers": "開發商", - "Contributors": "貢獻者", - "Testers": "測試人員", - "Special Thanks": "特別感謝", - "Unknown": "未知", - "Installed": "已安裝", - "Not Installed": "未安裝", - "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "啤酒製品許可證", - "Default": "預設", - "Do Not Override": "不要覆蓋", - "Disabled": "殘障人士", - "Enabled": "啟用", - " \\ue0e3 Reset": "\\ue0e3 重設", - "Display": "顯示", - "Application changed\\n\\n": "應用程式已更改\\n\\n", - "The running application changed\\n\\n": "正在運行的應用程式已更改\\n\\n", - "while editing was going on.": "當編輯正在進行時。", - "Board": "董事會", - "%u.%u%u mV": "%u.%u%u mV", - "Could not connect to hoc-clk sysmodule.\\n\\n": "無法連接到 hoc-clk 系統模組。 \\n\\n", - "Please make sure everything is\\n\\n": "請確保一切正常\\n\\n", - "correctly installed and enabled.": "正確安裝並啟用。", - "Fatal error": "致命錯誤", - "Temporary Overrides ": "臨時覆蓋", - "Sleep Mode": "睡眠模式", - "Stock": "庫存", - "Dev OC": "開發OC", - "Boost Mode": "升壓模式", - "Safe Max": "安全最大值", - "Unsafe Max": "不安全最大值", - "Absolute Max": "絕對最大值", - "Handheld Safe Max": "手持式安全最大", - "Enable": "啟用", - "Edit App Profile": "編輯應用程式設定檔", - "Edit Global Profile": "編輯全域設定檔", - "Temporary Overrides": "臨時覆蓋", - "Settings": "設定", - "About": "關於", - "Compiling with minimal features": "使用最少的功能進行編譯", - "General Settings": "常規設定", - "Governor Settings": "調速器設定", - "Safety Settings": "安全設定", - "Save KIP Settings": "儲存 KIP 設定", - "RAM Settings": "記憶體設定", - "CPU Settings": "中央處理器設定", - "GPU Settings": "GPU設定", - "Display Settings": "顯示設定", - "Experimental": "實驗性的", - "GPU Scheduling Override Method": "GPU調度覆蓋方法", - "can be dangerous and may cause": "可能很危險並可能導致", - "damage to your battery or charger!": "損壞電池或充電器！", - "Charge Current Override": "充電電流覆蓋", - "RAM Voltage Display Mode": "RAM電壓顯示模式", - "Polling Interval": "輪詢間隔", - "CPU Governor Minimum Frequency": "CPU調速器最低頻率", - "refresh rates may cause stress": "刷新率可能會造成壓力", - "or damage to your display! ": "或損壞您的顯示器！", - "Proceed at your own risk!": "請自行承擔風險！", - "Max Handheld Display": "最大手持顯示器", - "Display Clock": "顯示時鐘", - "Official Rating": "官方評級", - "TDP Threshold": "TDP閾值", - "Power": "電源", - "Thermal Throttle Limit": "熱油門限制", - "HP Mode": "惠普模式", - "Default (Mariko)": "預設（真理子）", - "Default (Erista)": "預設（埃里斯塔）", - "Rating": "評級", - "Safe Max (Mariko)": "安全最大（真理子）", - "Safe Max (Erista)": "安全最大（埃里斯塔）", - "RAM VDD2 Voltage": "RAM VDD2 電壓", - "Voltage": "電壓", - "RAM VDDQ Voltage": "RAM VDDQ 電壓", - "RAM Frequency Editor": "RAM頻率編輯器", - "JEDEC.": "JEDEC。", - "High speedo needed!": "需要高速！", - "3333MHz (Needs extreme Speedo/PLL)": "3333MHz（需要極高的 Speedo/PLL）", - "3366MHz (Needs extreme Speedo/PLL)": "3366MHz（需要極高的 Speedo/PLL）", - "3400MHz (Needs extreme Speedo/PLL)": "3400MHz（需要極高的 Speedo/PLL）", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz（需要荒謬的 Speedo/PLL）", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz（需要荒謬的 Speedo/PLL）", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz（需要荒謬的 Speedo/PLL）", - "Ram Max Clock": "記憶體最大時鐘", - "RAM Latency Editor": "RAM 延遲編輯器", - "RAM Timing Reductions": "RAM 時序減少", - "Memory Timings": "記憶體時序", - "Advanced": "進階", - "t6 tRTW Fine Tune": "t6 tRTW 微調", - "tRTW Fine Tune": "tRTW 微調", - "t7 tWTR Fine Tune": "t7 tWTR 微調", - "tWTR Fine Tune": "tWTR 微調", - "Memory Latencies": "記憶體延遲", - "Read Latency": "讀取延遲", - "Write Latency": "寫入延遲", - "CPU Boost Clock": "CPU 升壓時鐘", - "CPU UV": "中央處理器紫外線", - "CPU Unlock": "CPU解鎖", - "CPU VMIN": "CPU最低電壓", - "CPU Max Voltage": "CPU最大電壓", - "CPU Max Clock": "CPU 最大時脈", - "Extreme UV Table": "極端紫外線表", - "CPU UV Table": "CPU UV表", - "CPU Low UV": "CPU低紫外線", - "CPU High UV": "CPU高紫外線", - "CPU Low VMIN": "CPU 低 VMIN", - "CPU High VMIN": "CPU 高 VMIN", - "No Undervolt": "無欠壓", - "SLT Table": "SLT表", - "HiOPT Table": "HiOPT表", - "GPU Undervolt Table": "GPU 欠壓表", - "GPU Minimum Voltage": "GPU最低電壓", - "Calculate GPU Vmin": "計算 GPU Vmin", - "GPU VMIN": "GPU VMIN", - "GPU Maximum Voltage": "GPU最大電壓", - "GPU Voltage Offset": "GPU電壓偏移", - "Do not override": "不要覆蓋", - "Enabled (Default)": "啟用（預設）", - "96.6% limit": "96.6%限制", - "99.7% limit": "99.7%限制", - "GPU Scheduling Override": "GPU 調度覆蓋", - "Official Service": "官方服務", - "GPU DVFS Mode": "GPU DVFS 模式", - "GPU DVFS Offset": "GPU DVFS 偏移", - "GPU Voltage Table": "GPU電壓表", - "GPU Custom Table (mV)": "GPU 自訂表 (mV)", - "1075MHz without UV, 1152MHz on SLT": "無 UV 時為 1075MHz，SLT 時為 1152MHz", - "or 1228MHz on HiOPT can cause ": "或 HiOPT 上的 1228MHz 可能會導致", - "permanent damage to your Switch!": "對您的 Switch 造成永久性損壞！", - "921MHz without UV and 960MHz on": "無 UV 時為 921MHz，開啟時為 960MHz", - "SLT or HiOPT can cause ": "SLT 或 HiOPT 可能會導致" -} diff --git a/dist/config/horizon-oc/lang/ru.json b/dist/config/horizon-oc/lang/ru.json index 4cfdb1bd..7edb4408 100644 --- a/dist/config/horizon-oc/lang/ru.json +++ b/dist/config/horizon-oc/lang/ru.json @@ -1,141 +1,179 @@ { "Information": "Информация", - "IDDQ:": "ИДДК:", - "Module: ": "Модуль:", - "sys-dock status:": "Статус системной док-станции:", + "IDDQ:": "IDDQ:", + "Module: ": "Module:", + "sys-dock status:": "Статус sys-dock:", "SaltyNX status:": "Статус SaltyNX:", - "RR Display status:": "Статус отображения RR:", - "Wafer Position:": "Позиция вафли:", - "Credits": "Кредиты", + "RR Display status:": "Статус RR Display:", + "Wafer Position:": "Wafer Position:", + "Credits": "Благодарности", "Developers": "Разработчики", - "Contributors": "Авторы", + "Contributors": "Внесли вклад", "Testers": "Тестеры", "Special Thanks": "Особая благодарность", "Unknown": "Неизвестно", "Installed": "Установлено", "Not Installed": "Не установлено", "X: %u Y: %u": "X: %u Y: %u", - "THE BEER-WARE LICENSE": "ЛИЦЕНЗИЯ НА ПРОДАЖУ ПИВА", + "THE BEER-WARE LICENSE": "BEER-WARE LICENSE", "Default": "По умолчанию", - "Do Not Override": "Не переопределять", + "Do Not Override": "Не менять", "Disabled": "Отключено", "Enabled": "Включено", + "Auto": "Авто", " \\ue0e3 Reset": "\\ue0e3 Сброс", "Display": "Дисплей", "Application changed\\n\\n": "Приложение изменено\\n\\n", "The running application changed\\n\\n": "Запущенное приложение изменилось\\n\\n", "while editing was going on.": "пока шло редактирование.", - "Board": "Совет", + "Board": "Board", "%u.%u%u mV": "%u.%u%u мВ", - "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к системному модулю hoc-clk.\\n\\n", - "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все в порядке\\n\\n", - "correctly installed and enabled.": "правильно установлен и включен.", - "Fatal error": "Неустранимая ошибка", - "Temporary Overrides ": "Временные переопределения", + "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к сис-модулю hoc-clk.\\n\\n", + "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все\\n\\n", + "correctly installed and enabled.": "правильно установлено и включено.", + "Fatal error": "Фатальная ошибка", + "Temporary Overrides ": "Временный профиль", "Sleep Mode": "Спящий режим", - "Stock": "Акции", - "Dev OC": "Разработчик OC", - "Boost Mode": "Режим повышения", - "Safe Max": "Сейф Макс", - "Unsafe Max": "Небезопасный Макс", - "Absolute Max": "Абсолютный Макс", - "Handheld Safe Max": "Ручной сейф Макс", - "Enable": "Включить", - "Edit App Profile": "Редактировать профиль приложения", - "Edit Global Profile": "Редактировать глобальный профиль", - "Temporary Overrides": "Временные переопределения", + "Stock": "Стандарт", + "Dev OC": "Разгон dev-кита", + "Boost Mode": "Режим буста", + "Safe Max": "Безопасный макс.", + "Unsafe Max": "Опасный макс.", + "Absolute Max": "Абсолютный макс.", + "Handheld Safe Max": "Портативный безопасный макс.", + "Enable": "Включено", + "Edit App Profile": "Профиль приложения", + "Edit Global Profile": "Глобальный профиль", + "Temporary Overrides": "Временный профиль", "Settings": "Настройки", - "About": "О", - "Compiling with minimal features": "Компиляция с минимальными возможностями", - "General Settings": "Общие настройки", - "Governor Settings": "Настройки губернатора", + "About": "Сведения", + "Compiling with minimal features": "Собрано с урезанием функций", + "\uE150 Settings marked in blue": "Настройки помеченные синим", + "don't require a reboot to apply!": "Синие настройки применяются сразу!", + "General Settings": "Основные настройки", + "Governor Settings": "Настройки говернора", "Safety Settings": "Настройки безопасности", - "Save KIP Settings": "Сохранить настройки КИП", - "RAM Settings": "Настройки ОЗУ", - "CPU Settings": "Настройки процессора", - "GPU Settings": "Настройки графического процессора", + "Save KIP Settings": "Сохранить настройки KIP", + "RAM Settings": "Настройки RAM", + "CPU Settings": "Настройки CPU", + "GPU Settings": "Настройки GPU", "Display Settings": "Настройки дисплея", "Experimental": "Экспериментальный", - "GPU Scheduling Override Method": "Метод переопределения планирования графического процессора", - "can be dangerous and may cause": "может быть опасным и может вызвать", - "damage to your battery or charger!": "повреждение аккумулятора или зарядного устройства!", - "Charge Current Override": "Блокировка зарядного тока", - "RAM Voltage Display Mode": "Режим отображения напряжения ОЗУ", + "Enable Experimental Settings": "Экспериментальные настройки", + "\uE150 Experimental Settings are incomplete ": "Экспериментальные настройки не закончены", + "and may not work correctly or at all!": "Экспериментальные настройки не", + "Here be dragons!": "закончены и могут не работать!", + "Experimental Settings": "Экспериментальные", + "Live CPU Undervolt": "Мгновенный андервольт CPU", + "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU", + "Memory Frequency Measurement Mode": "Режим измерения частоты RAM", + "\uE150 Overriding the charge current": "Перезапись зарядного тока может", + "can be dangerous and may cause": "Перезапись зарядного тока может", + "damage to your battery or charger!": "повреждить аккумулятор или зарядку!", + "Charge Current Override": "Перезапись зарядного тока", + "RAM Voltage Display Mode": "Показ вольтажа RAM", + "RAM Display Unit": "Показ единицы измерения RAM", "Polling Interval": "Интервал опроса", - "CPU Governor Minimum Frequency": "Минимальная частота регулятора ЦП", - "refresh rates may cause stress": "частота обновления может вызвать стресс", - "or damage to your display! ": "или повреждение дисплея!", + "CPU Governor Minimum Frequency": "Минимальная частота говернора CPU", + "\uE150 Usage of unsafe display": "\uE150 Использование не безопасной", + "refresh rates may cause stress": "Не безопасная частота", + "or damage to your display! ": "может повредить ваш экран", "Proceed at your own risk!": "Действуйте на свой страх и риск!", - "Max Handheld Display": "Макс. портативный дисплей", - "Display Clock": "Дисплей Часы", + "Max Handheld Display Hz": "Макс. в портативе", + "Display Clock": "Частота экрана", "Official Rating": "Официальный рейтинг", "TDP Threshold": "Порог TDP", "Power": "Мощность", - "Thermal Throttle Limit": "Температурный предел дроссельной заслонки", + "Thermal Throttle Limit": "Предел троттлинга", "HP Mode": "Режим HP", - "Default (Mariko)": "По умолчанию (Марико)", - "Default (Erista)": "По умолчанию (Эриста)", + "Default (Mariko)": "По умолчанию (M)", + "Default (Erista)": "По умолчанию (E)", "Rating": "Рейтинг", - "Safe Max (Mariko)": "Сейф Макс (Марико)", - "Safe Max (Erista)": "Сейф Макс (Эриста)", - "RAM VDD2 Voltage": "Напряжение ОЗУ VDD2", - "Voltage": "Напряжение", - "RAM VDDQ Voltage": "Напряжение ОЗУ VDDQ", - "RAM Frequency Editor": "Редактор частоты оперативной памяти", - "JEDEC.": "ДЖЕДЕК.", - "High speedo needed!": "Нужен высокий спидометр!", - "3333MHz (Needs extreme Speedo/PLL)": "3333 МГц (требуется экстремальный спидометр/PLL)", - "3366MHz (Needs extreme Speedo/PLL)": "3366 МГц (требуется экстремальный спидометр/PLL)", - "3400MHz (Needs extreme Speedo/PLL)": "3400 МГц (требуется экстремальный спидометр/PLL)", - "3433MHz (Needs ridiculous Speedo/PLL)": "3433 МГц (нужен нелепый спидометр/PLL)", - "3466MHz (Needs ridiculous Speedo/PLL)": "3466 МГц (нужен нелепый спидометр/PLL)", - "3500MHz (Needs ridiculous Speedo/PLL)": "3500 МГц (нужен нелепый спидометр/PLL)", - "Ram Max Clock": "Рам Макс Часы", - "RAM Latency Editor": "Редактор задержки оперативной памяти", - "RAM Timing Reductions": "Сокращение таймингов ОЗУ", - "Memory Timings": "Тайминги памяти", - "Advanced": "Расширенный", - "t6 tRTW Fine Tune": "t6 tRTW Точная настройка", - "tRTW Fine Tune": "tRTW Точная настройка", - "t7 tWTR Fine Tune": "t7 tWTR Тонкая настройка", - "tWTR Fine Tune": "tWTR Тонкая настройка", + "Safe Max (Mariko)": "Сейф Макс (M)", + "Safe Max (Erista)": "Сейф Макс (E)", + "RAM VDD2 Voltage": "Вольтаж VDD2", + "Voltage": "Вольтаж", + "RAM VDDQ Voltage": "Вольтаж VDDQ", + "Step Mode": "Частотный шаг", + "RAM Frequency Editor": "Редактор частоты", + "JEDEC.": "JEDEC.", + "High speedo needed!": "Для высоких speedo", + "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (нужны невероятные speedo/PLL)", + "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (нужны невероятные speedo/PLL)", + "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (нужны невероятные speedo/PLL)", + "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (нужны безумные speedo/PLL)", + "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (нужны безумные speedo/PLL)", + "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (нужны безумные speedo/PLL)", + "Ram Max Clock": "Макс. частота", + "RAM Latency Editor": "Редактор задержек", + "1333 Latency Max": "1333 задержка", + "1600 Latency Max": "1600 задержка", + "1866 Latency Max": "1866 задержка", + "2133 Latency Max": "2133 задержка", + "RAM Timing Reductions": "Настройка таймингов", + "Memory Timings": "Тайминги RAM", + "RAM-Timing tBreak": "Разбитие таблицы таймингов", + "Memory": "RAM", + "mem": "RAM", + "MEM": "RAM", + "Profile": "Профиль", + "Governor": "Говернор", + "Advanced": "Расширенные", + "Docked": "В доке", + "Handheld": "Портатив", + "Charging": "На зарядке", + "USB Charger": "USB Зарядка", + "PD Charger": "PD Зарядка", + "Handheld TDP": "TPD в портативе", + "Thermal Throttle": "Троттлинг", + "Uncapped Clocks": "Максимальные частоты", + "SoC DVB Shift": "SoC DVB сдвиг", + "SoC Max Volt": "Макс. вольт SoC", + "Overwrite Boost Mode": "Перезапись буста", + "Display Refresh Rate Changing": "Изменение частоты экрана", + "Low t6 tRTW": "Нижний t6 tRTW", + "Low t7 tWTR": "Нижний t7 tWTR", + "1333WL t2 RP Cap": "Предел 1333WL t2 RP", + "t6 tRTW Fine Tune": " Точная настройка t6 tRTW", + "tRTW Fine Tune": " Точная настройка tRTW", + "t7 tWTR Fine Tune": " Точная настройка t7 tWTR", + "tWTR Fine Tune": " Точная настройка tWTR", "Memory Latencies": "Задержки памяти", "Read Latency": "Задержка чтения", "Write Latency": "Задержка записи", - "CPU Boost Clock": "Тактовая частота процессора", - "CPU UV": "УФ процессора", - "CPU Unlock": "Разблокировка процессора", - "CPU VMIN": "ЦП VMIN", - "CPU Max Voltage": "Максимальное напряжение процессора", - "CPU Max Clock": "Максимальная частота процессора", - "Extreme UV Table": "Стол для экстремального УФ-излучения", - "CPU UV Table": "UV-таблица процессора", - "CPU Low UV": "ЦП с низким УФ-излучением", - "CPU High UV": "Процессор с высоким УФ", - "CPU Low VMIN": "Низкий VMIN процессора", - "CPU High VMIN": "Высокий VMIN процессора", - "No Undervolt": "Нет Андервольта", - "SLT Table": "Таблица ТА", + "CPU Boost Clock": "Частота буста", + "CPU UV": "Андервольт CPU", + "CPU Unlock": "Разблокировка CPU", + "CPU VMIN": "Мин. вольтаж", + "CPU Max Voltage": "Макс. вольтаж", + "CPU Max Clock": "Макс. частота", + "Extreme UV Table": "Экстримальная", + "CPU UV Table": "Таблица андервольта", + "CPU Low UV": "Андервольт нижних частот", + "CPU High UV": "Андервольт верхних частот", + "CPU Low VMIN": "Мин. вольт. нижних частот", + "CPU High VMIN": "Мин. вольт. верхних частот", + "No Undervolt": "Без андервольта", + "SLT Table": "Таблица SLT", "HiOPT Table": "Таблица HiOPT", - "GPU Undervolt Table": "Таблица пониженного напряжения графического процессора", - "GPU Minimum Voltage": "Минимальное напряжение графического процессора", - "Calculate GPU Vmin": "Рассчитать Vmin графического процессора", - "GPU VMIN": "Вмин графического процессора", - "GPU Maximum Voltage": "Максимальное напряжение графического процессора", - "GPU Voltage Offset": "Смещение напряжения графического процессора", - "Do not override": "Не переопределять", - "Enabled (Default)": "Включено (по умолчанию)", - "96.6% limit": "Предел 96,6%", - "99.7% limit": "лимит 99,7%", - "GPU Scheduling Override": "Переопределение планирования графического процессора", + "GPU Undervolt Table": "Таблица андервольта", + "GPU Minimum Voltage": "Мин. вольтаж", + "Calculate GPU Vmin": "Вычисление мин. вольтаж", + "GPU VMIN": "Мин. вольтаж", + "GPU Maximum Voltage": "Макс. вольтаж", + "GPU Voltage Offset": "Смещение вольтажа", + "Do not override": "Не менять", + "Enabled (Default)": "Включено (По умолчанию)", + "96.6% limit": "≤96,6%", + "99.7% limit": "≤99,7%", + "GPU Scheduling Override": "Перезапись планировщика", "Official Service": "Официальная служба", - "GPU DVFS Mode": "Режим графического процессора DVFS", - "GPU DVFS Offset": "Смещение DVFS графического процессора", - "GPU Voltage Table": "Таблица напряжений графического процессора", - "GPU Custom Table (mV)": "Пользовательская таблица графического процессора (мВ)", - "1075MHz without UV, 1152MHz on SLT": "1075 МГц без УФ, 1152 МГц на SLT", - "or 1228MHz on HiOPT can cause ": "или 1228 МГц на HiOPT может привести к", - "permanent damage to your Switch!": "необратимое повреждение вашего коммутатора!", - "921MHz without UV and 960MHz on": "921 МГц без УФ и 960 МГц с включенным", - "SLT or HiOPT can cause ": "SLT или HiOPT могут вызвать" + "GPU DVFS Mode": "Режим DVFS", + "GPU DVFS Offset": "Смещение DVFS", + "GPU Voltage Table": "Таблица вольтажей", + "GPU Custom Table (mV)": "Ручная таблица (мВ)", + "\uE150 Setting GPU Clocks past": "\uE150 Установка частот GPU выше", + "1228MHz without a proper undervolt": "Установка частот GPU выше 1228 МГц", + "can cause degradation or damage": "без хорошего андервольта может", + "to your console!": "повредить вашу консоль!" } diff --git a/dist/switch/.overlays/Horizon-OC-Monitor.ovl b/dist/switch/.overlays/Horizon-OC-Monitor.ovl index 8445c3c4..125e34cf 100644 Binary files a/dist/switch/.overlays/Horizon-OC-Monitor.ovl and b/dist/switch/.overlays/Horizon-OC-Monitor.ovl differ diff --git a/dist/switch/.overlays/horizon-oc-overlay.ovl b/dist/switch/.overlays/horizon-oc-overlay.ovl index a546ef38..76d055a0 100644 Binary files a/dist/switch/.overlays/horizon-oc-overlay.ovl and b/dist/switch/.overlays/horizon-oc-overlay.ovl differ