diff --git a/README.md b/README.md
index 7137d4bd..3c0a3b20 100644
--- a/README.md
+++ b/README.md
@@ -4,72 +4,68 @@
Overclocking suite for Horizon OS (HOS) running on Atmosphere CFW.
-This project will not be actively maintained or regularly updated along with Atmosphere CFW.
-
## DISCLAIMER: USE AT YOUR OWN RISK!
-- Overclocking in general (often combined with overvolting and overheating) will _degrade internal components_ - SoC, VRM(Voltage Regulator Module), Battery, etc. - _faster_ than you and the manufacturer have expected.
+- Overclocking in general will shorten the lifespan of some hardware components.
+
+- Due to HorizonOS design, instabilities from unsafe RAM clocks may cause filesystem corruption. **Always make backup before usage.**
-- Higher RAM clocks without proper timings could be UNSTABLE and cause graphical glitches / instabilities / filesystem corruption. **Always make backup before usage.**
## Features
-- **DRAM Overclock**
+- Erista variant (HAC-001)
+ - DRAM Overclock
+ - Safe: 1862.4 MHz
+ - Unsafe:
+ - DRAM bus overvolting
- - Most games are **bottlenecked by RAM bandwidth**
+ - Modded sys-clk and ReverseNX-RT
+ - CPU & GPU frequency governor (Experimental)
+ - Fast-charging (2A) toggle, set charge limit (20% - 100%)
+ - Global Profile
+ - Sync ReverseNX Mode
+
+- Mariko variant (HAC-001-01, HDH-001, HEG-001)
+ - CPU / GPU Overclock
+ - Safe: 1963 / 921 MHz
+ - Unsafe:
+ - Enable "Allow Unsafe Frequencies" in overlay to unlock frequencies up to 2397 / 1305 MHz
+ - See [README for sys-clk-OC](https://github.com/KazushiMe/Switch-OC-Suite/blob/master/Source/sys-clk-OC/README.md)
- - Safe:
- - Mariko: 1996.8 MHz has been tested stable for all (Samsung / Micron / Hynix), with built-in timing auto-adjustment.
- - Erista: 1862.4 MHz.
+ - DRAM Overclock
+ - Safe: 1996.8 MHz with built-in timing adjustment
+ - Unsafe:
+ - [DRAM bus overvolting](https://gist.github.com/KazushiMe/6bb0fcbefe0e03b1274079522516d56d).
- - Unsafe: higher than 1996.8 MHz or overvolting
-
+ - Modded sys-clk and ReverseNX-RT
+ - Auto CPU Boost
+ - CPU & GPU frequency governor (Experimental)
+ - Fast-charging (2A) toggle, set charge limit (20% - 100%)
+ - Global Profile
+ - Sync ReverseNX Mode
- - Timing:
- - Timing parameters could be auto-adjusted (default) or overwritten with user-provided mtc table.
- - Customization: No GUI tool, requires [rebuilding](#Build).
+- Auto CPU Boost
+ - For faster game loading
+ - Enable CPU Boost (1785 MHz) when CPU Core#3 (System Core) is stressed (mainly I/O operations).
+ - Effective only when charger is connected.
- - DRAM bus overvolting (Erista Only).
- - Mariko: [use this to set DRAM bus voltage](https://gist.github.com/KazushiMe/6bb0fcbefe0e03b1274079522516d56d).
+- CPU & GPU frequency governor (Experimental)
+ - Adjust frequency based on load. Might decrease power draw but can introduce stutters. Can be turned off for specific titles.
-
+- Fast-charging (2A) toggle, set charge limit (20% - 100%)
+ - Long-term use of charge limit may render the battery gauge inaccurate. Performing full cycles could help recalibration, or try [battery_desync_fix_nx](https://github.com/CTCaer/battery_desync_fix_nx).
-- **Modded sys-clk and ReverseNX**(-RT)
+- Global profile
+ - Designated a dummy title id `0xA111111111111111`.
+ - Priority: "Temp overrides" > "Application profile" > "Global profile" > "System default".
- - CPU & GPU frequency governor (Experimental)
- - Adjust frequency based on load. Might decrease power draw but can introduce stutters.
-
- - Global profile
- - Designated a dummy title id `0xA111111111111111`.
- - Priority: "Temp overrides" > "Application profile" > "Global profile" > "System default".
-
- - Miscellaneous
- - Sync ReverseNX Mode: No need to change clocks manually after toggling modes in ReverseNX
+- Sync ReverseNX Mode
+ - No need to change clocks manually after toggling modes in ReverseNX (-RT and -Tool)
- **[System Settings (Optional)](https://github.com/KazushiMe/Switch-OC-Suite/blob/master/system_settings.md)**
-### Mariko Only
-
-- **CPU/GPU Overclock**
-
- - Safe: CPU/GPU @ 1963/921 MHz
-
- - Unsafe: **NOT RECOMMENDED**
- - **Disabled by default**, toggle "Allow Unsafe Frequencies" on in overlay or add `allow_unsafe_freq=1` to `config.ini`
- - Power draw will be significant higher than what the mainboard was designed to tolerate at anything higher than 1963/921 MHz.
- - See [README for sys-clk-OC](https://github.com/KazushiMe/Switch-OC-Suite/blob/master/Source/sys-clk-OC/README.md)
-
- - Auto CPU Boost: For faster game loading
- - Enable CPU Boost (1785 MHz, could be configured higher) when CPU Core#3 (System Core) is stressed, especially when the game is loading assets from eMMC/SD card (I/O ops).
- - Auto-Boost will be enabled only when charger is connected.
-
- - View charger & battery info, toggle fast-charging(2A) or set charge limit (20% - 100%) in overlay
- - Note: Long-term use of charge limit may render the battery gauge inaccurate. Performing full cycles could help recalibration, or try [battery_desync_fix_nx](https://github.com/CTCaer/battery_desync_fix_nx).
-
-
-
## Installation
1. Download latest [release](https://github.com/KazushiMe/Switch-OC-Suite/releases/latest).
@@ -78,7 +74,7 @@ This project will not be actively maintained or regularly updated along with Atm
3. Grab `x.x.x_loader.kip` for your Atmosphere version, rename it to `loader.kip` and place it in `/atmosphere/kips/`.
-4. Customization
+4. Customization via [online loader configurator](https://kazushime.github.io/Switch-OC-Suite/):
| Defaults | Mariko | Erista |
@@ -93,24 +89,14 @@ This project will not be actively maintained or regularly updated along with Atm
- - [Online loader configurator](https://kazushime.github.io/Switch-OC-Suite/)
- - Tested with latest Chrome(107) and Safari (16) (as of November 2022), older browsers may not work properly.
-
-5. **Hekate-ipl bootloader**
- - Rename the kip to `loader.kip` and add `kip1=atmosphere/kips/loader.kip` in `bootloader/hekate_ipl.ini`
- - Erista: Minerva module conflicts with HOS DRAM training. Recompile with frequency changed is recommeded, although you could simply remove `bootloader/sys/libsys_minerva.bso`.
-
- **Atmosphere Fusee bootloader:**
- - Fusee will load any kips in `/atmosphere/kips/` automatically.
-
-
-### Patching sysmodules manually
-
-This method is only served as reference as it could damage your MMC file system if not handled properly.
-
-Patched sysmodules would be persistent until pcv or ptm was updated in new HOS (normally in `x.0.0`).
+5. Hekate-ipl bootloader Only
+ - Add `kip1=atmosphere/kips/loader.kip` to boot entry section in `bootloader/hekate_ipl.ini`.
+ Deprecated: patching sysmodules manually
+ This method is only served as reference as it could damage your MMC file system if not handled properly.
+
+ Patched sysmodules would be persistent until pcv or ptm was updated in new HOS (normally in `x.0.0`).
Tools:
- Lockpick_RCM
@@ -125,21 +111,18 @@ Patched sysmodules would be persistent until pcv or ptm was updated in new HOS (
3. Configure and run `test_patch.sh` to generate patched pcv & ptm sysmodules in nca
4. Replace nca in `SYSTEM:/Contents/registered/` with TegraExplorer
5. `ValidateAcidSignature()` should be stubbed to allow unsigned sysmodules to load (a.k.a. `loader_patch`)
-
-
## Build
-### Loader KIP
-
+
Grab necessary patches from the repo, then compile sys-clk, ReverseNX-RT and Atmosphere loader with devkitpro.
If you are to install nro forwarders, stub `ValidateAcidSignature()` with `R_SUCCEED();` in `Atmosphere/stratosphere/loader/source/ldr_meta.cpp` to make them work again.
-Uncompress the kip to make it work with config editor: `hactool -t kip1 Atmosphere/stratosphere/loader/out/nintendo_nx_arm64_armv8a/release/loader.kip --uncompress=./loader.kip`
-
+Uncompress the kip to make it work with configurator: `hactool -t kip1 Atmosphere/stratosphere/loader/out/nintendo_nx_arm64_armv8a/release/loader.kip --uncompress=./loader.kip`
+
## Acknowledgement