Sys-clk-OC: Option to regard Power Delivery chargers supplying >=18W (typically, 9V/2A) as official chargers

README.md

@@ -19,9 +19,11 @@ Overclocking suite for Switch **(Mariko Only)** running on Atmosphere CFW. Suppo
 - **CPU/GPU/RAM Overclock** up to **2397.0/1344.0/2131.2 MHz**
 - **Auto-Boost CPU for faster game loading**
 - **Fan Control Optimization** at high load
-- **Modded sys-clk and ReverseNX**(-Tools and -RT), **no need to change clocks manually** after toggling modes in ReverseNX
+- **Modded sys-clk and ReverseNX**(-Tools and -RT)
-- Disable background services, less heat and power consumption in standby mode
+  - Option to regard Power Delivery chargers supplying >=18W (typically, 9V/2A) as official chargers
+  - **No need to change clocks manually** after toggling modes in ReverseNX
   - Profile-aware clock override for all games
+- Disable background services, less heat and power consumption in standby mode
 - Game recording and SysDVR streaming @ 60fps with high video bitrate
 - Remove copyright watermark in screenshots/recordings, courtesy of [HookedBehemoth](https://github.com/HookedBehemoth/exefs_patches)
 - **TinyMemBenchNX**: DRAM throughput and latency test based on [tinymembench](https://github.com/ssvb/tinymembench)
@@ -43,11 +45,12 @@ Overclocking suite for Switch **(Mariko Only)** running on Atmosphere CFW. Suppo
     - To **disable this feature**, simply remove `boost_start.flag` and `boost.flag` in `/config/sys-clk/ `.
 - **Fan Control Optimization** at high load
   - Higher tolerable temperature and smoother fan curve. Set `holdable_tskin` to 56˚C. Previously it's set to 48˚C, so by default the fan would go crazy (80~100%) easily with a slight degree of OC.
-- **Modded sys-clk and ReverseNX**(-Tools and -RT), **no need to change clocks manually** after toggling modes in ReverseNX
+- **Modded sys-clk and ReverseNX**(-Tools and -RT)
+  - Option to regard Power Delivery chargers that could supply >=18W (typically, 9V/2A) as official chargers.
+    - To **disable this feature**, remove `/config/sys-clk/pd18w_official.flag `.
+  - **No need to change clocks manually** after toggling modes in ReverseNX
     - Add `/config/sys-clk/downclock_dock.flag` to use handheld clocks in Docked mode when Handheld mode is set in ReverseNX.
-  - To **disable this feature**, use original version of ReverseNX and delete `/config/sys-clk/ReverseNX_sync.flag`.
+    - To **disable this feature**, use original version of ReverseNX-RT and delete `/config/sys-clk/ReverseNX_sync.flag`.
-- Disable background services, less heat and power consumption in standby mode
-  - **Remove** the "Disable Background service" part in `/atmosphere/config/system_settings.ini` if you **use Nintendo Online services**.
   - Profile-aware clock override for all games
     - Add `[A111111111111111]` title config in `/config/sys-clk/config.ini` to set frequency override globally:
       ```ini
@@ -63,7 +66,8 @@ Overclocking suite for Switch **(Mariko Only)** running on Atmosphere CFW. Suppo
       handheld_cpu=
       handheld_gpu=
       ```
-
+- Disable background services, less heat and power consumption in standby mode
+  - **Remove** the "Disable Background service" part in `/atmosphere/config/system_settings.ini` if you **use Nintendo Online services**.
 - Game recording and SysDVR streaming @ 60fps with high video bitrate (7.5Mbps)
   - (Recommended)[dvr-patches](https://github.com/exelix11/dvr-patches): Allow recording in any games.
   - For optimal streaming experience, SysDVR via USB interface is recommended.

Source/sys-clk-OC/sysmodule/src/clocks.cpp

@@ -11,9 +11,42 @@
 #include <nxExt.h>
 #include "clocks.h"
 #include "errors.h"
+#include "file_utils.h"
 
 bool Clocks::isMariko = false;
 
+typedef enum {
+    None         = 0,
+    PD           = 1,
+    TypeC_1500mA = 2,
+    TypeC_3000mA = 3,
+    DCP          = 4,
+    CDP          = 5,
+    SDP          = 6,
+    Apple_500mA  = 7,
+    Apple_1000mA = 8,
+    Apple_2000mA = 9
+} BatteryChargeInfoFieldsChargerType;
+
+typedef struct {
+    uint32_t InputCurrentLimit;     //Input (Sink) current limit in mA
+    uint32_t VBUSCurrentLimit;      //Output (Source/VBUS/OTG) current limit in mA
+    uint32_t ChargeCurrentLimit;    //Battery charging current limit in mA (512mA when Docked, 768mA when BatteryTemperature < 17.0 C)
+    uint32_t ChargeVoltageLimit;    //Battery charging voltage limit in mV (3952mV when BatteryTemperature >= 51.0 C)
+    uint32_t unk_x10;               //Possibly an emum, getting the same value as PowerRole in all tested cases
+    uint32_t unk_x14;               //Possibly flags
+    uint16_t PDControllerState;     //Power Delivery Controller State
+    uint32_t BatteryTemperature;    //Battery temperature in milli C
+    uint32_t RawBatteryCharge;      //Raw battery charged capacity per cent-mille (i.e. 100% = 100000 pcm)
+    uint32_t VoltageAvg;            //Voltage avg in mV (more in Notes)
+    uint32_t BatteryAge;            //Battery age (capacity full / capacity design) per cent-mille (i.e. 100% = 100000 pcm)
+    uint16_t PowerRole;             //Sink or Source
+    BatteryChargeInfoFieldsChargerType ChargerType;
+    uint32_t ChargerVoltageLimit;   //Charger and external device voltage limit in mV
+    uint32_t ChargerCurrentLimit;   //Charger and external device current limit in mA
+    uint16_t Flags;                 //Unknown flags
+} BatteryChargeInfoFields;
+
 void Clocks::GetList(SysClkModule module, std::uint32_t **outClocks)
 {
     switch(module)
@@ -193,6 +226,10 @@ void Clocks::ResetToStock(unsigned int module)
     }
 }
 
+Result psmGetBatteryChargeInfoFields(Service* psmService, BatteryChargeInfoFields *out) {
+    return serviceDispatchOut(psmService, 17, *out);
+}
+
 SysClkProfile Clocks::GetCurrentProfile()
 {
     std::uint32_t mode = 0;
@@ -204,22 +241,35 @@ SysClkProfile Clocks::GetCurrentProfile()
         return SysClkProfile_Docked;
     }
 
+    if(FileUtils::IsPd18wAsOfficialChargerEnabled())
+    {
+        static Service* psmService = psmGetServiceSession();
+        static BatteryChargeInfoFields* _Fields = new BatteryChargeInfoFields;
+        psmGetBatteryChargeInfoFields(psmService, _Fields);
+        if(_Fields->ChargerType == PD)
+        {
+            uint8_t ChargerWatts = (_Fields->ChargerVoltageLimit * _Fields->ChargerCurrentLimit)/1000000.0;
+            if(ChargerWatts >= 17)
+                return SysClkProfile_HandheldChargingOfficial;
+        }
+    }
+
     PsmChargerType chargerType;
 
     rc = psmGetChargerType(&chargerType);
     ASSERT_RESULT_OK(rc, "psmGetChargerType");
 
-    if(chargerType == PsmChargerType_EnoughPower)
+    switch(chargerType)
     {
+        case PsmChargerType_EnoughPower:
             return SysClkProfile_HandheldChargingOfficial;
-    }
+        case PsmChargerType_LowPower:
-    else if(chargerType == PsmChargerType_LowPower || chargerType == PsmChargerType_NotSupported)
+        case PsmChargerType_NotSupported:
-    {
             return SysClkProfile_HandheldChargingUSB;
-    }
+        default:
-
             return SysClkProfile_Handheld;
     }
+}
 
 void Clocks::SetHz(SysClkModule module, std::uint32_t hz)
 {

Source/sys-clk-OC/sysmodule/src/file_utils.cpp

@@ -21,6 +21,7 @@ static bool g_log_enabled = false;
 static bool g_boost_enabled = false;
 static bool g_boost_start_enabled = false;
 static bool g_downclock_dock_enabled = false;
+static bool g_pd18w_as_official_charger_enabled = false;
 static bool g_reversenx_tool_exist = false;
 static bool g_reversenx_sync_enabled = false;
 static std::uint64_t g_last_flag_check = 0;
@@ -183,6 +184,13 @@ void FileUtils::InitCheckFlags()
         fclose(file);
     }
 
+    file = fopen(FILE_PD18W_AS_OFFICIAL_CHARGER_FLAG_PATH, "r");
+    if (file)
+    {
+        g_pd18w_as_official_charger_enabled = true;
+        fclose(file);
+    }
+
     file = fopen(FILE_REVERSENX_SYNC_FLAG_PATH, "r");
     if (file)
     {
@@ -213,6 +221,11 @@ bool FileUtils::IsDownclockDockEnabled()
     return g_downclock_dock_enabled;
 }
 
+bool FileUtils::IsPd18wAsOfficialChargerEnabled()
+{
+    return g_pd18w_as_official_charger_enabled;
+}
+
 bool FileUtils::IsReverseNXToolExist()
 {
     return g_reversenx_tool_exist;

Source/sys-clk-OC/sysmodule/src/file_utils.h

@@ -25,6 +25,7 @@
 #define FILE_BOOST_FLAG_PATH FILE_CONFIG_DIR "/boost.flag"
 #define FILE_BOOST_START_FLAG_PATH FILE_CONFIG_DIR "/boost_start.flag"
 #define FILE_DOWNCLOCK_DOCK_FLAG_PATH FILE_CONFIG_DIR "/downclock_dock.flag"
+#define FILE_PD18W_AS_OFFICIAL_CHARGER_FLAG_PATH FILE_CONFIG_DIR "/pd18w_official.flag"
 #define FILE_SALTYNX_PATH "/atmosphere/contents/0000000000534C56/flags/boot2.flag" // Just check for SaltyNX boot flag
 #define FILE_REVERSENX_SYNC_FLAG_PATH FILE_CONFIG_DIR "/ReverseNX_sync.flag"
 #define FILE_REVERSENX_RT_CONF_PATH FILE_CONFIG_DIR "/ReverseNX-RT.conf"
@@ -39,6 +40,7 @@ class FileUtils
     static bool IsBoostEnabled();
     static bool IsBoostStartEnabled();
     static bool IsDownclockDockEnabled();
+    static bool IsPd18wAsOfficialChargerEnabled();
     static bool IsReverseNXSyncEnabled();
     static bool IsReverseNXToolExist();
     static void InitializeAsync();