diff --git a/Source/hoc-clk/common/include/hocclk/board.h b/Source/hoc-clk/common/include/hocclk/board.h
index 52e1d0d8..cea5fe6f 100644
--- a/Source/hoc-clk/common/include/hocclk/board.h
+++ b/Source/hoc-clk/common/include/hocclk/board.h
@@ -158,6 +158,12 @@ typedef enum {
     RamDisplayMode_EnumMax,
 } RamDisplayMode;
 
+typedef enum {
+    MemoryFrequencyMeasurementMode_Actmon = 0,
+    MemoryFrequencyMeasurementMode_PLL,
+    MemoryFrequencyMeasurementMode_EnumMax,
+} MemoryFrequencyMeasurementMode;
+
 #define HOCCLK_ENUM_VALID(n, v) ((v) < n##_EnumMax)
 
 // Packed u32
diff --git a/Source/hoc-clk/common/include/hocclk/config.h b/Source/hoc-clk/common/include/hocclk/config.h
index 60da66dc..7fa0170a 100644
--- a/Source/hoc-clk/common/include/hocclk/config.h
+++ b/Source/hoc-clk/common/include/hocclk/config.h
@@ -68,6 +68,8 @@ typedef enum {
     HocClkConfigValue_CpuGovernorMinimumFreq,
     HocClkConfigValue_DisplayVoltage,
 
+    HocClkConfigValue_MemoryFrequencyMeasurementMode,
+
     KipConfigValue_custRev,
     // KipConfigValue_mtcConf,
     KipConfigValue_hpMode,
@@ -257,6 +259,9 @@ static inline const char* hocclkFormatConfigValue(HocClkConfigValue val, bool pr
         case HocClkConfigValue_DisplayVoltage:
             return pretty ? "Display Voltage" : "display_voltage";
 
+        case HocClkConfigValue_MemoryFrequencyMeasurementMode:
+            return pretty ? "Memory Frequency Measurement Mode" : "mem_freq_measurement_mode";
+
         // KIP config values
         case KipConfigValue_custRev:
             return pretty ? "Custom Revision" : "kip_cust_rev";
@@ -436,6 +441,7 @@ static inline uint64_t hocclkDefaultConfigValue(HocClkConfigValue val)
         case HocClkConfigValue_GPUScheduling:
         case HocClkConfigValue_LiveCpuUv:
         case HocClkConfigValue_GPUSchedulingMethod:
+        case HocClkConfigValue_MemoryFrequencyMeasurementMode:
             return 0ULL;
         case HocClkConfigValue_EristaMaxCpuClock:
             return 1785ULL;
@@ -592,6 +598,7 @@ static inline uint64_t hocclkValidConfigValue(HocClkConfigValue val, uint64_t in
         case HocClkConfigValue_GPUScheduling:
         case HocClkConfigValue_RAMVoltDisplayMode:
         case HocClkConfigValue_CpuGovernorMinimumFreq:
+        case HocClkConfigValue_MemoryFrequencyMeasurementMode:
             return true;
         case HocClkConfigValue_BatteryChargeCurrent:
             return ((input >= 1024) && (input <= 3072)) || !input;
diff --git a/Source/hoc-clk/common/include/registers.h b/Source/hoc-clk/common/include/registers.h
index 82977371..da944663 100644
--- a/Source/hoc-clk/common/include/registers.h
+++ b/Source/hoc-clk/common/include/registers.h
@@ -525,3 +525,24 @@
 #define CL_DVFS_I2C_STS_0 0x48
 #define CL_DVFS_INTR_STS_0 0x5C
 #define CL_DVFS_I2C_CLK_DIVISOR_REGISTER_0 0x16C
+
+#define CLK_SOURCE_EMC  0x19c
+
+#define PLLC_BASE   0x080
+#define PLLM_BASE   0x090
+#define PLLP_BASE   0x0a0
+#define PLLA_BASE   0x0b0
+#define PLLU_BASE   0x0c0
+#define _PLLD_BASE   0x0d0
+#define PLLX_BASE   0x0e0
+#define PLLE_BASE   0x0e8
+#define PLLC2_BASE  0x4e8
+#define PLLC3_BASE  0x4fc
+#define PLLD2_BASE  0x4b8
+#define PLLRE_BASE  0x4c4
+#define PLLC4_BASE  0x5a4
+#define PLLMB_BASE  0x5e8
+#define PLLA1_BASE  0x6a4
+#define PLLDP_BASE  0x590
+
+#define OSC_HZ 38400000ULL
\ No newline at end of file
diff --git a/Source/hoc-clk/overlay/src/ui/gui/base_menu_gui.cpp b/Source/hoc-clk/overlay/src/ui/gui/base_menu_gui.cpp
index d2672cc0..c2f861da 100644
--- a/Source/hoc-clk/overlay/src/ui/gui/base_menu_gui.cpp
+++ b/Source/hoc-clk/overlay/src/ui/gui/base_menu_gui.cpp
@@ -121,7 +121,7 @@ void BaseMenuGui::preDraw(tsl::gfx::Renderer* renderer) {
 
     // === VOLTAGES ===
     renderer->drawString(displayStrings[8], false, dataPositions[0], y, SMALL_TEXT_SIZE, tsl::infoTextColor);   // CPU voltage
-    renderer->drawString(displayStrings[9], false, dataPositions[1] + 9, y, SMALL_TEXT_SIZE, tsl::infoTextColor);   // GPU voltage
+    renderer->drawString(displayStrings[9], false, dataPositions[1], y, SMALL_TEXT_SIZE, tsl::infoTextColor);   // GPU voltage
 
     renderer->drawStringWithColoredSections(displayStrings[10], false, {""}, dataPositions[2], y, SMALL_TEXT_SIZE, tsl::infoTextColor, tsl::separatorColor);
 
diff --git a/Source/hoc-clk/overlay/src/ui/gui/misc_gui.cpp b/Source/hoc-clk/overlay/src/ui/gui/misc_gui.cpp
index c2cee1c8..5c71a16e 100644
--- a/Source/hoc-clk/overlay/src/ui/gui/misc_gui.cpp
+++ b/Source/hoc-clk/overlay/src/ui/gui/misc_gui.cpp
@@ -42,6 +42,7 @@ class CpuSubmenuGui;
 class GpuSubmenuGui;
 class GpuCustomTableSubmenuGui;
 class RamTableEditor;
+class ExperimentalSettingsSubMenuGui;
 
 MiscGui::MiscGui()
 {
@@ -458,100 +459,19 @@ void MiscGui::listUI()
     displaySubMenu->setValue(R_ARROW);
     this->listElement->addItem(displaySubMenu);
 
-    #if IS_MINIMAL == 0
-        // std::vector<NamedValue> chargerCurrents = {
-        //     NamedValue("Disabled", 0),
-        //     NamedValue("1024mA", 1024),
-        //     NamedValue("1280mA", 1280),
-        //     NamedValue("1536mA", 1536),
-        //     NamedValue("1792mA", 1792),
-        //     NamedValue("2048mA", 2048),
-        //     NamedValue("2304mA", 2304),
-        //     NamedValue("2560mA", 2560),
-        //     NamedValue("2816mA", 2816),
-        //     NamedValue("3072mA", 3072),
-        // };
-        if(this->configList->values[HocClkConfigValue_EnableExperimentalSettings]) {
-            this->listElement->addItem(new tsl::elm::CategoryHeader("Experimental"));
-
-            addConfigToggle(HocClkConfigValue_LiveCpuUv, nullptr);
-            std::vector<NamedValue> gpuSchedMethodValues = {
-                NamedValue("INI", GpuSchedulingOverrideMethod_Ini),
-                NamedValue("NV Service", GpuSchedulingOverrideMethod_NvService),
-            };
-            addConfigButton(
-                HocClkConfigValue_GPUSchedulingMethod,
-                "GPU Scheduling Override Method",
-                ValueRange(0, 0, 1, "", 0),
-                "GPU Scheduling Override Method",
-                &thresholdsDisabled,
-                {},
-                gpuSchedMethodValues,
-                false
-            );
-            tsl::elm::CustomDrawer* chargeWarningText = new tsl::elm::CustomDrawer([](tsl::gfx::Renderer *renderer, s32 x, s32 y, s32 w, s32 h) {
-                renderer->drawString("\uE150 Overriding the charge current", false, x + 20, y + 30, 18, tsl::style::color::ColorText);
-                renderer->drawString("can be dangerous and may cause", false, x + 20, y + 50, 18, tsl::style::color::ColorText);
-                renderer->drawString("damage to your battery or charger!", false, x + 20, y + 70, 18, tsl::style::color::ColorText);
-            });
-            chargeWarningText->setBoundaries(0, 0, tsl::cfg::FramebufferWidth, 90);
-            this->listElement->addItem(chargeWarningText);
-
-            if(!IsHoag()) {
-                    std::vector<NamedValue> chargerCurrents = {
-                        NamedValue("Disabled", 0),
-                        NamedValue("1024mA", 1024),
-                        NamedValue("1280mA", 1280),
-                        NamedValue("1536mA", 1536),
-                        NamedValue("1792mA", 1792),
-                        NamedValue("2048mA", 2048),
-                        NamedValue("2304mA", 2304),
-                        NamedValue("2560mA", 2560),
-                        NamedValue("2816mA", 2816),
-                        NamedValue("3072mA", 3072),
-                    };
-
-                    ValueThresholds chargerThresholds(2048, 2049);
-
-                    addConfigButton(
-                        HocClkConfigValue_BatteryChargeCurrent,
-                        "Charge Current Override",
-                        ValueRange(0, 0, 1, "", 0),
-                        "Charge Current Override",
-                        &chargerThresholds,
-                        {},
-                        chargerCurrents,
-                        false
-                    );
+    if(this->configList->values[HocClkConfigValue_EnableExperimentalSettings]) {
+        tsl::elm::ListItem* experimentalSubMenu = new tsl::elm::ListItem("Experimental Settings");
+        experimentalSubMenu->setClickListener([](u64 keys) {
+            if (keys & HidNpadButton_A) {
+                tsl::changeTo<ExperimentalSettingsSubMenuGui>();
+                return true;
             }
-            else {
-                std::vector<NamedValue> chargerCurrents = {
-                    NamedValue("Disabled", 0),
-                    NamedValue("1024mA", 1024),
-                    NamedValue("1280mA", 1280),
-                    NamedValue("1536mA", 1536),
-                    NamedValue("1792mA", 1792),
-                    NamedValue("2048mA", 2048),
-                    NamedValue("2304mA", 2304),
-                    NamedValue("2560mA", 2560),
-                };
+            return false;
+        });
+        experimentalSubMenu->setValue(R_ARROW);
+        this->listElement->addItem(experimentalSubMenu);
+    }
 
-                ValueThresholds chargerThresholds(1792, 1793);
-
-                addConfigButton(
-                    HocClkConfigValue_BatteryChargeCurrent,
-                    "Charge Current Override",
-                    ValueRange(0, 0, 1, "", 0),
-                    "Charge Current Override",
-                    &chargerThresholds,
-                    {},
-                    chargerCurrents,
-                    false
-                );
-
-            }
-        }
-    #endif
 }
 
 class GeneralSettingsSubMenuGui : public MiscGui {
@@ -579,9 +499,125 @@ protected:
             {},
             false
         );
+
+        tsl::elm::CustomDrawer* exSetWarning = new tsl::elm::CustomDrawer([](tsl::gfx::Renderer *renderer, s32 x, s32 y, s32 w, s32 h) {
+            renderer->drawString("\uE150 Experimental Settings", false, x + 20, y + 30, 18, tsl::style::color::ColorText);
+            renderer->drawString("are a work in progress! Use with caution!", false, x + 20, y + 50, 18, tsl::style::color::ColorText);
+            renderer->drawString("Here be dragons!", false, x + 20, y + 70, 18, tsl::style::color::ColorText);
+        });
+        exSetWarning->setBoundaries(0, 0, tsl::cfg::FramebufferWidth, 90);
+        this->listElement->addItem(exSetWarning);
+
+        addConfigToggle(HocClkConfigValue_EnableExperimentalSettings, nullptr);
     }
 };
 
+class ExperimentalSettingsSubMenuGui : public MiscGui {
+public:
+    ExperimentalSettingsSubMenuGui() { }
+
+protected:
+    void listUI() override {
+        this->listElement->addItem(new tsl::elm::CategoryHeader("Experimental Settings"));
+        ValueThresholds thresholdsDisabled(0, 0);
+
+        addConfigToggle(HocClkConfigValue_LiveCpuUv, nullptr);
+        std::vector<NamedValue> gpuSchedMethodValues = {
+            NamedValue("INI", GpuSchedulingOverrideMethod_Ini),
+            NamedValue("NV Service", GpuSchedulingOverrideMethod_NvService),
+        };
+        addConfigButton(
+            HocClkConfigValue_GPUSchedulingMethod,
+            "GPU Scheduling Override Method",
+            ValueRange(0, 0, 1, "", 0),
+            "GPU Scheduling Override Method",
+            &thresholdsDisabled,
+            {},
+            gpuSchedMethodValues,
+            false
+        );
+
+        
+        std::vector<NamedValue> ramRFMeasurementMethods = {
+            NamedValue("Actmon", MemoryFrequencyMeasurementMode_Actmon),
+            NamedValue("PLL", MemoryFrequencyMeasurementMode_PLL),
+        };
+        addConfigButton(
+            HocClkConfigValue_MemoryFrequencyMeasurementMode,
+            "Memory Frequency Measurement Mode",
+            ValueRange(0, 0, 1, "", 0),
+            "Memory Frequency Measurement Mode",
+            &thresholdsDisabled,
+            {},
+            ramRFMeasurementMethods,
+            false
+        );
+
+
+        tsl::elm::CustomDrawer* chargeWarningText = new tsl::elm::CustomDrawer([](tsl::gfx::Renderer *renderer, s32 x, s32 y, s32 w, s32 h) {
+            renderer->drawString("\uE150 Overriding the charge current", false, x + 20, y + 30, 18, tsl::style::color::ColorText);
+            renderer->drawString("can be dangerous and may cause", false, x + 20, y + 50, 18, tsl::style::color::ColorText);
+            renderer->drawString("damage to your battery or charger!", false, x + 20, y + 70, 18, tsl::style::color::ColorText);
+        });
+        chargeWarningText->setBoundaries(0, 0, tsl::cfg::FramebufferWidth, 90);
+        this->listElement->addItem(chargeWarningText);
+
+        if(!IsHoag()) {
+                std::vector<NamedValue> chargerCurrents = {
+                    NamedValue("Disabled", 0),
+                    NamedValue("1024mA", 1024),
+                    NamedValue("1280mA", 1280),
+                    NamedValue("1536mA", 1536),
+                    NamedValue("1792mA", 1792),
+                    NamedValue("2048mA", 2048),
+                    NamedValue("2304mA", 2304),
+                    NamedValue("2560mA", 2560),
+                    NamedValue("2816mA", 2816),
+                    NamedValue("3072mA", 3072),
+                };
+
+                ValueThresholds chargerThresholds(2048, 2049);
+
+                addConfigButton(
+                    HocClkConfigValue_BatteryChargeCurrent,
+                    "Charge Current Override",
+                    ValueRange(0, 0, 1, "", 0),
+                    "Charge Current Override",
+                    &chargerThresholds,
+                    {},
+                    chargerCurrents,
+                    false
+                );
+        } else {
+            std::vector<NamedValue> chargerCurrents = {
+                NamedValue("Disabled", 0),
+                NamedValue("1024mA", 1024),
+                NamedValue("1280mA", 1280),
+                NamedValue("1536mA", 1536),
+                NamedValue("1792mA", 1792),
+                NamedValue("2048mA", 2048),
+                NamedValue("2304mA", 2304),
+                NamedValue("2560mA", 2560),
+            };
+
+            ValueThresholds chargerThresholds(1792, 1793);
+
+            addConfigButton(
+                HocClkConfigValue_BatteryChargeCurrent,
+                "Charge Current Override",
+                ValueRange(0, 0, 1, "", 0),
+                "Charge Current Override",
+                &chargerThresholds,
+                {},
+                chargerCurrents,
+                false
+            );
+
+        }
+    }
+};
+
+
 class GovernorSettingsSubMenuGui : public MiscGui {
 public:
     GovernorSettingsSubMenuGui() { }
@@ -1314,7 +1350,7 @@ protected:
             addConfigButton(
                 KipConfigValue_eristaGpuVmin,
                 "GPU Minimum Voltage",
-                ValueRange(700, 875, 5, "mV", 1),
+                ValueRange(675, 875, 5, "mV", 1),
                 "GPU Minimum Voltage",
                 &thresholdsDisabled,
                 {},
diff --git a/Source/hoc-clk/sysmodule/perms.json b/Source/hoc-clk/sysmodule/perms.json
index 5da29946..2d03d800 100644
--- a/Source/hoc-clk/sysmodule/perms.json
+++ b/Source/hoc-clk/sysmodule/perms.json
@@ -86,7 +86,8 @@
                 "is_ro": false,
                 "is_io": true
             }
-        }, {
+        },
+		{
 			"type": "syscalls",
 			"value": {
 				"svcUnknown":	"0x00",
diff --git a/Source/hoc-clk/sysmodule/src/board/board.cpp b/Source/hoc-clk/sysmodule/src/board/board.cpp
index f53f4514..34429b8b 100644
--- a/Source/hoc-clk/sysmodule/src/board/board.cpp
+++ b/Source/hoc-clk/sysmodule/src/board/board.cpp
@@ -44,6 +44,8 @@
 #include "../file_utils.hpp"
 namespace board {
 
+    u64 clkVirtAddr, dsiVirtAddr;
+
     HocClkSocType gSocType;
     u8 gDramID;
     HocClkConsoleType gConsoleType = HocClkConsoleType_Iowa;
@@ -145,14 +147,12 @@ namespace board {
 
         StartMiscThread(pwmCheck, &iCon);
 
-        u64 clkVirtAddr, dsiVirtAddr;
-
         rc = QueryMemoryMapping(&clkVirtAddr, 0x60006000, 0x1000);
         ASSERT_RESULT_OK(rc, "QueryMemoryMapping (clk)");
 
         rc = QueryMemoryMapping(&dsiVirtAddr, 0x54300000, 0x40000);
         ASSERT_RESULT_OK(rc, "QueryMemoryMapping (dsi)");
-
+        
         display::DisplayRefreshConfig cfg = {.clkVirtAddr = clkVirtAddr, .dsiVirtAddr = dsiVirtAddr, .isLite = (GetConsoleType() == HocClkConsoleType_Hoag), .isRetroSUPER = integrations::GetRETROSuperStatus()};
         display::Initialize(&cfg);
 
diff --git a/Source/hoc-clk/sysmodule/src/board/board.hpp b/Source/hoc-clk/sysmodule/src/board/board.hpp
index cbe599a5..90318892 100644
--- a/Source/hoc-clk/sysmodule/src/board/board.hpp
+++ b/Source/hoc-clk/sysmodule/src/board/board.hpp
@@ -40,7 +40,7 @@
 #define HOSSVC_HAS_TC (hosversionAtLeast(5,0,0))
 
 namespace board {
-
+    extern u64 clkVirtAddr, dsiVirtAddr;
     void Initialize();
     void Exit();
     HocClkSocType GetSocType();
diff --git a/Source/hoc-clk/sysmodule/src/board/board_freq.cpp b/Source/hoc-clk/sysmodule/src/board/board_freq.cpp
index 5ab9ad9f..4400edfd 100644
--- a/Source/hoc-clk/sysmodule/src/board/board_freq.cpp
+++ b/Source/hoc-clk/sysmodule/src/board/board_freq.cpp
@@ -31,7 +31,8 @@
 #include "board.hpp"
 #include "board_name.hpp"
 #include "../errors.hpp"
-
+#include "pllmb.hpp"
+#include "../config.hpp"
 namespace board {
 
     PcvModule GetPcvModule(HocClkModule hocclkModule) {
@@ -141,10 +142,9 @@ namespace board {
             case HocClkModule_GPU:
                 return t210ClkGpuFreq();
             case HocClkModule_MEM:
-                return t210ClkMemFreq();
+                return config::GetConfigValue(HocClkConfigValue_MemoryFrequencyMeasurementMode) == MemoryFrequencyMeasurementMode_PLL ? pllmb::getRamClockRatePLLMB() : t210ClkMemFreq();
             case HocClkModule_Display:
                 return GetDisplayRate(hz);
-            return hz;
             default:
                 ASSERT_ENUM_VALID(HocClkModule, module);
         }
diff --git a/Source/hoc-clk/sysmodule/src/board/pllmb.cpp b/Source/hoc-clk/sysmodule/src/board/pllmb.cpp
new file mode 100644
index 00000000..66aed25f
--- /dev/null
+++ b/Source/hoc-clk/sysmodule/src/board/pllmb.cpp
@@ -0,0 +1,132 @@
+#include "pllmb.hpp"
+
+namespace pllmb {
+    static const u8 qlin_hw_to_pdiv[17] = {
+        1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, 16, 18, 20, 24, 30, 32
+    };
+
+    enum pdiv_type {
+        PDIV_QLIN, 
+        PDIV_POW2 
+    };
+
+    struct pll_desc_t {
+        u32       base_offset;
+        u8        divm_shift;
+        u8        divm_width;
+        u8        divn_shift;
+        u8        divn_width;
+        u8        divp_shift;
+        u8        divp_width;
+        pdiv_type ptype;
+    };
+
+    static const pll_desc_t pll_table[] = {
+        { PLLM_BASE,  0, 8,  8, 8, 20, 5, PDIV_QLIN },
+        { PLLMB_BASE, 0, 8,  8, 8, 20, 5, PDIV_QLIN },
+        { PLLP_BASE,  0, 8,  8, 8, 20, 5, PDIV_POW2 },
+        { PLLA_BASE,  0, 8,  8, 8, 20, 5, PDIV_POW2 },
+        { PLLU_BASE,  0, 8,  8, 8, 20, 5, PDIV_POW2 },
+        { _PLLD_BASE,  0, 8,  8, 8, 20, 5, PDIV_POW2 },
+        { PLLX_BASE,  0, 8,  8, 8, 20, 5, PDIV_QLIN },
+        { PLLA1_BASE, 0, 8,  8, 8, 20, 5, PDIV_QLIN },
+        { PLLDP_BASE, 0, 8,  8, 8, 20, 5, PDIV_QLIN },
+        { PLLD2_BASE, 0, 8,  8, 8, 20, 5, PDIV_QLIN },
+        { PLLC4_BASE, 0, 8,  8, 8, 20, 5, PDIV_QLIN },
+        { PLLRE_BASE, 0, 8,  8, 8, 16, 4, PDIV_QLIN },
+        { PLLC_BASE,  0, 8, 10, 8, 20, 5, PDIV_QLIN },
+        { PLLC2_BASE, 0, 8, 10, 8, 20, 5, PDIV_QLIN },
+        { PLLC3_BASE, 0, 8, 10, 8, 20, 5, PDIV_QLIN },
+    };
+
+    static inline u32 clk_read32(u32 offset)
+    {
+        return *(volatile u32 *)(uintptr_t)(board::clkVirtAddr + offset);
+    }
+
+    static inline u32 extract(u32 val, u8 shift, u8 width)
+    {
+        return (val >> shift) & ((1u << width) - 1u);
+    }
+
+    static u64 pll_rate_from_desc(const pll_desc_t &pll, u64 osc_hz,
+                                  bool undivided)
+    {
+        u32 base = clk_read32(pll.base_offset);
+        u32 divm = extract(base, pll.divm_shift, pll.divm_width);
+        u32 divn = extract(base, pll.divn_shift, pll.divn_width);
+
+        if (divm == 0 || divn == 0)
+            return 0;
+
+        u64 vco = osc_hz * divn / divm;
+
+        if (undivided)
+            return vco;
+
+        u32 hw_p = extract(base, pll.divp_shift, pll.divp_width);
+        u32 pdiv;
+
+        if (pll.ptype == PDIV_QLIN)
+            pdiv = (hw_p < 17) ? qlin_hw_to_pdiv[hw_p] : 1;
+        else
+            pdiv = 1u << hw_p;
+
+        return vco / pdiv;
+    }
+
+    static u64 pll_rate_by_offset(u32 base_offset, u64 osc_hz,
+                                  bool undivided)
+    {
+        for (const auto &pll : pll_table) {
+            if (pll.base_offset == base_offset)
+                return pll_rate_from_desc(pll, osc_hz, undivided);
+        }
+        return 0;
+    }
+
+    u64 getRamClockRatePLLMB()
+    {
+        u32 clk_src = clk_read32(CLK_SOURCE_EMC);
+        u32 src     = (clk_src >> 29) & 0x7;
+        u32 div     = (clk_src >>  0) & 0xff;
+
+        u32  pll_off;
+        bool undivided = false;
+
+        switch (src) {
+            case EMC_SRC_PLLM:
+                pll_off = PLLM_BASE;
+                break;
+            case EMC_SRC_PLLM_UD:
+                pll_off = PLLM_BASE;
+                undivided = true;
+                break;
+            case EMC_SRC_PLLMB:
+                pll_off = PLLMB_BASE;
+                break;
+            case EMC_SRC_PLLMB_UD:
+                pll_off = PLLMB_BASE;
+                undivided = true;
+                break;
+            case EMC_SRC_PLLP:
+                pll_off = PLLP_BASE;
+                break;
+            case EMC_SRC_PLLP_UD:
+                pll_off = PLLP_BASE;
+                undivided = true;
+                break;
+            case EMC_SRC_PLLC:
+                pll_off = PLLC_BASE;
+                break;
+            case EMC_SRC_CLK_M:
+                return OSC_HZ;
+            default:
+                return 0;
+        }
+
+        u64 pll_hz = pll_rate_by_offset(pll_off, OSC_HZ, undivided);
+        return pll_hz / (div + 2) * 2;
+    }
+
+}
\ No newline at end of file
diff --git a/Source/hoc-clk/sysmodule/src/board/pllmb.hpp b/Source/hoc-clk/sysmodule/src/board/pllmb.hpp
new file mode 100644
index 00000000..fcb089d0
--- /dev/null
+++ b/Source/hoc-clk/sysmodule/src/board/pllmb.hpp
@@ -0,0 +1,21 @@
+#pragma once
+#include <cstdint>
+#include <switch.h>
+#include <hocclk.h>
+#include "board.hpp"  
+#include <registers.h>
+namespace pllmb {
+
+    typedef enum PLLSource {
+         EMC_SRC_PLLM      = 0,
+         EMC_SRC_PLLC      = 1,
+         EMC_SRC_PLLP      = 2,
+         EMC_SRC_CLK_M     = 3,
+         EMC_SRC_PLLM_UD   = 4,
+         EMC_SRC_PLLMB_UD  = 5,
+         EMC_SRC_PLLMB     = 6,
+         EMC_SRC_PLLP_UD   = 7
+    } PLLSource;
+
+    u64 getRamClockRatePLLMB();
+}
\ No newline at end of file
diff --git a/Source/hoc-clk/sysmodule/src/clock_manager.cpp b/Source/hoc-clk/sysmodule/src/clock_manager.cpp
index 115a0843..f03c9d60 100644
--- a/Source/hoc-clk/sysmodule/src/clock_manager.cpp
+++ b/Source/hoc-clk/sysmodule/src/clock_manager.cpp
@@ -545,8 +545,6 @@ namespace clockManager {
 
     void Initialize()
     {
-        config::Initialize();
-
         gContext = {};
         gContext.applicationId = 0;
         gContext.profile = HocClkProfile_Handheld;
@@ -592,7 +590,6 @@ namespace clockManager {
     void Exit()
     {
         governor::exitThreads();
-        config::Exit();
     }
 
     HocClkContext GetCurrentContext()
diff --git a/Source/hoc-clk/sysmodule/src/main.cpp b/Source/hoc-clk/sysmodule/src/main.cpp
index ec43aca2..dabf2e53 100644
--- a/Source/hoc-clk/sysmodule/src/main.cpp
+++ b/Source/hoc-clk/sysmodule/src/main.cpp
@@ -134,6 +134,7 @@ int main(int argc, char** argv)
         fatalThrow(rc);
         return 1;
     }
+    config::Initialize();
 
     board::Initialize();
     processManagement::Initialize();
@@ -164,7 +165,7 @@ int main(int argc, char** argv)
     clockManager::Exit();
     processManagement::Exit();
     board::Exit();
-
+    config::Exit();
     fileUtils::LogLine("Exit");
     svcSleepThread(1000000ULL);
     fileUtils::Exit();
diff --git a/dist/README.md b/dist/README.md
index 6b62de66..ee2b64e6 100644
--- a/dist/README.md
+++ b/dist/README.md
@@ -32,7 +32,7 @@ It enables advanced CPU, GPU, and RAM tuning with user-friendly configuration to
 
 ---
 
-## Features
+## Default clocks
 
 * **CPU:** Up to 1963MHz (Mariko) / 1785MHz (Erista)
 * **GPU:** Up to 1075MHz (Mariko) / 921MHz (Erista)
@@ -93,7 +93,8 @@ Refer to COMPILATION.md
 * 665
 
 ### CPU clocks
-* 2601 → mariko absolute max, very dangerous
+* 2703 → mariko absolute max, dangerous
+* 2601 → unsafe
 * 2499
 * 2397 → mariko safe max with UV (low speedo)
 * 2295
@@ -113,9 +114,6 @@ Refer to COMPILATION.md
 * 816
 * 714
 * 612 → sleep mode
-  
-**Notes:**
-1. On Erista, CPU in handheld is capped to 1581MHz
 
 ### GPU clocks
 * 1536 → absolute max clock on mariko. very dangerous
@@ -142,27 +140,33 @@ Refer to COMPILATION.md
 * 76 → boost mode
 
 **Notes:**
-1. GPU overclock is capped at 460MHz on erista in handheld
-2. On Mariko, cap with No uv is 614MHz, with SLT it is 691MHz and with HiOPT it's 768MHz
-3. Clocks higher than 768MHz on erista need the official charger is plugged in.
-4. On Mariko, cap with No uv is 844MHz, with SLT it is 921MHz and with HiOPT it's 998MHz
+1. On Erista, CPU in handheld is capped to 1581MHz
+2. GPU overclock is capped at 460MHz on erista in handheld
+3. On Mariko, cap with No uv is 614MHz, with SLT it is 691MHz and with HiOPT it's 768MHz
+4. Clocks higher than 768MHz on erista need the official charger is plugged in.
+5. On Mariko, cap with No uv is 844MHz, with SLT it is 921MHz and with HiOPT it's 998MHz
+
 
 ---
 
 ## Credits
 * **Lightos's Cat** - Cat
 
-* **Souldbminer** – hoc-clk and loader development
-* **Lightos** – loader patches development
+* **Souldbminer** - hoc-clk and loader development
+* **Lightos** - Loader patches development, hoc-clk development, guides
 * **SciresM** - Atmosphere CFW
-* **CTCaer** - L4T, Hekate, perfect ram timings
-* **KazushiMe** – Switch OC Suite
-* **hanai3bi (meha)** – Switch OC Suite, EOS, sys-clk-eos
-* **NaGaa95** – L4T-OC-kernel
-* **B3711 (halop)** – EOS
-* **sys-clk team (m4xw, p-sam, natinusala)** – sys-clk
-* **b0rd2death** – Ultrahand sys-clk & Status Monitor fork
+* **CTCaer** - L4T, Hekate, proper RAM timings
+* **KazushiMe** - Switch OC Suite
+* **Hanai3bi (Meha)** - Switch OC Suite, EOS, sys-clk-eos
+* **NaGaa95** - L4T-OC kernel, Status Monitor fork
+* **B3711 (halop)** - EOS
+* **sys-clk team (m4xw, p-sam, natinusala)** - sys-clk
+* **Dominatorul** - Soctherm driver, guides, general help
+* **b0rd2death** - Ultrahand sys-clk & Status Monitor fork
 * **MasaGratoR and ZachyCatGames** - General help
-* **MasaGratoR** - Status Monitor & Display Refresh Rate Driver
-* **Dom, Samybigio, Arcdelta, Miki, Happy, Flopsider, Winnerboi77, Blaise, Alvise, TDRR, agjeococh, frost, letum00 and Xenshen** - Testing
-* **Samybigio2011** - Italian translations
+* **MasaGratoR** - Status Monitor & Display Refresh Rate driver
+* **Dominatorul, Samybigio, Arcdelta, Miki, Happy, Flopsider, Winnerboi77, Blaise, Alvise, TDRR, agjeococh, frost, letum00, and Xenshen** - Testing
+* **Samybigio2011, Miki** - Italian translations
+* **angelblaster** - Korean translations
+* **q1332348216-glitch** - Chinese translations
+* **Nvidia** - [Tegra X1 Technical Reference Manual](https://developer.nvidia.com/embedded/dlc/tegra-x1-technical-reference-manual), soctherm driver, L4T
diff --git a/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp b/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp
index bb078c98..6dcb537f 100644
Binary files a/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp and b/dist/atmosphere/contents/00FF0000636C6BFF/exefs.nsp differ
diff --git a/dist/config/horizon-oc/lang/lang/it.json b/dist/config/horizon-oc/lang/lang/it.json
index d7056f36..5e65fdae 100644
--- a/dist/config/horizon-oc/lang/lang/it.json
+++ b/dist/config/horizon-oc/lang/lang/it.json
@@ -2,140 +2,140 @@
     "Information": "Informazioni",
     "IDDQ:": "IDDQ:",
     "Module: ": "Modulo:",
-    "sys-dock status:": "stato del dock di sistema:",
+    "sys-dock status:": "stato di sys-dock",
     "SaltyNX status:": "Stato di SaltyNX:",
-    "RR Display status:": "Stato di visualizzazione RR:",
-    "Wafer Position:": "Posizione del wafer:",
+    "RR Display status:": "Stato del RR:",
+    "Wafer Position:": "Posizione nel Wafer:",
     "Credits": "Crediti",
     "Developers": "Sviluppatori",
     "Contributors": "Collaboratori",
     "Testers": "Tester",
-    "Special Thanks": "Un ringraziamento speciale",
+    "Special Thanks": "Un Ringraziamento Speciale",
     "Unknown": "Sconosciuto",
     "Installed": "Installato",
     "Not Installed": "Non installato",
     "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "LA LICENZA PER GLI ARTICOLI DI BIRRA",
+    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE",
     "Default": "Predefinito",
-    "Do Not Override": "Non sovrascrivere",
+    "Do Not Override": "Non Sovrascrivere",
     "Disabled": "Disabilitato",
     "Enabled": "Abilitato",
     " \\ue0e3 Reset": "\\ue0e3 Ripristina",
-    "Display": "Visualizzazione",
+    "Display": "Schermo",
     "Application changed\\n\\n": "Applicazione modificata\\n\\n",
     "The running application changed\\n\\n": "L'applicazione in esecuzione è cambiata\\n\\n",
     "while editing was going on.": "mentre era in corso la modifica.",
-    "Board": "Consiglio",
+    "Board": "Scheda",
     "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al modulo di sistema hoc-clk.\\n\\n",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al sysmodule hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n",
     "correctly installed and enabled.": "correttamente installato e abilitato.",
     "Fatal error": "Errore fatale",
-    "Temporary Overrides ": "Sostituzioni temporanee",
-    "Sleep Mode": "Modalità di sospensione",
-    "Stock": "Magazzino",
-    "Dev OC": "OC di sviluppo",
-    "Boost Mode": "Modalità potenziamento",
-    "Safe Max": "Sicuro massimo",
-    "Unsafe Max": "Non sicuro Max",
-    "Absolute Max": "Massimo assoluto",
-    "Handheld Safe Max": "Cassaforte portatile max",
+    "Temporary Overrides ": "Sostituzioni Temporanee",
+    "Sleep Mode": "Modalità di Sospensione",
+    "Stock": "Originale",
+    "Dev OC": "OC dev",
+    "Boost Mode": "Modalità Boost",
+    "Safe Max": "Massimo Sicuro",
+    "Unsafe Max": "Massimo Non Sicuro",
+    "Absolute Max": "Massimo Assoluto",
+    "Handheld Safe Max": "Massimo Sicuro Modalità Portatile",
     "Enable": "Abilita",
-    "Edit App Profile": "Modifica profilo dell'app",
-    "Edit Global Profile": "Modifica profilo globale",
-    "Temporary Overrides": "Sostituzioni temporanee",
+    "Edit App Profile": "Modifica Profilo Dell'App",
+    "Edit Global Profile": "Modifica Profilo Globale",
+    "Temporary Overrides": "Sostituzioni Temporanee",
     "Settings": "Impostazioni",
-    "About": "Circa",
+    "About": "A Riguardo Di",
     "Compiling with minimal features": "Compilazione con funzionalità minime",
-    "General Settings": "Impostazioni generali",
-    "Governor Settings": "Impostazioni del governatore",
-    "Safety Settings": "Impostazioni di sicurezza",
-    "Save KIP Settings": "Salva le impostazioni KIP",
+    "General Settings": "Impostazioni Generali",
+    "Governor Settings": "Impostazioni Del Governor",
+    "Safety Settings": "Impostazioni Di Sicurezza",
+    "Save KIP Settings": "Salva le impostazioni del KIP",
     "RAM Settings": "Impostazioni della RAM",
     "CPU Settings": "Impostazioni della CPU",
     "GPU Settings": "Impostazioni della GPU",
-    "Display Settings": "Impostazioni di visualizzazione",
+    "Display Settings": "Impostazioni dello Schermo",
     "Experimental": "Sperimentale",
-    "GPU Scheduling Override Method": "Metodo di override della pianificazione GPU",
+    "GPU Scheduling Override Method": "Metodo di override dello scheduling GPU",
     "can be dangerous and may cause": "può essere pericoloso e può causare",
     "damage to your battery or charger!": "danni alla batteria o al caricabatterie!",
-    "Charge Current Override": "Override della corrente di carica",
-    "RAM Voltage Display Mode": "Modalità di visualizzazione della tensione RAM",
+    "Charge Current Override": "Override della Corrente di Carica",
+    "RAM Voltage Display Mode": "Modalità di Visualizzazione della Tensione RAM",
     "Polling Interval": "Intervallo di polling",
-    "CPU Governor Minimum Frequency": "Frequenza minima del governatore della CPU",
+    "CPU Governor Minimum Frequency": "Frequenza minima del Governor della CPU",
     "refresh rates may cause stress": "le frequenze di aggiornamento possono causare stress",
     "or damage to your display! ": "o danni al display!",
     "Proceed at your own risk!": "Procedi a tuo rischio e pericolo!",
-    "Max Handheld Display": "Display portatile massimo",
-    "Display Clock": "Visualizza orologio",
-    "Official Rating": "Valutazione ufficiale",
+    "Max Handheld Display": "Display Massimo in Modalità Portatile",
+    "Display Clock": "Frequenza del Display",
+    "Official Rating": "Rating Ufficiale",
     "TDP Threshold": "Soglia TDP",
     "Power": "Potenza",
-    "Thermal Throttle Limit": "Limite della valvola termica",
+    "Thermal Throttle Limit": "Limite Termico",
     "HP Mode": "Modalità HP",
     "Default (Mariko)": "Predefinito (Mariko)",
     "Default (Erista)": "Predefinito (Erista)",
     "Rating": "Valutazione",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
+    "Safe Max (Mariko)": "Massimo Sicuro (Mariko)",
+    "Safe Max (Erista)": "Massimo Sicuro (Erista)",
     "RAM VDD2 Voltage": "Tensione RAM VDD2",
     "Voltage": "Voltaggio",
     "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM",
     "RAM Frequency Editor": "Editor della frequenza RAM",
     "JEDEC.": "JEDEC.",
-    "High speedo needed!": "È necessaria l'alta velocità!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL estremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL estremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL estremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (è necessario un ridicolo Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (è necessario un ridicolo Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (è necessario un ridicolo Speedo/PLL)",
-    "Ram Max Clock": "Orologio Ram Max",
-    "RAM Latency Editor": "Editor della latenza RAM",
-    "RAM Timing Reductions": "Riduzioni della temporizzazione della RAM",
-    "Memory Timings": "Tempi di memoria",
+    "High speedo needed!": "Alto Valore Speedo Necessario!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL altissimo)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL altissimo)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL altissimo)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (richiede Speedo/PLL estremo)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (richiede Speedo/PLL estremo)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (richiede Speedo/PLL estremo)",
+    "Ram Max Clock": "Frequenza Massima Ram",
+    "RAM Latency Editor": "Editor della Latenza RAM",
+    "RAM Timing Reductions": "Riduzioni dei Timing della RAM",
+    "Memory Timings": "Timing di Memoria",
     "Advanced": "Avanzato",
-    "t6 tRTW Fine Tune": "t6 tRTW Sintonia fine",
-    "tRTW Fine Tune": "tRTW Sintonia fine",
-    "t7 tWTR Fine Tune": "t7 tWTR Sintonia fine",
-    "tWTR Fine Tune": "tWTR Sintonia fine",
-    "Memory Latencies": "Latenza della memoria",
-    "Read Latency": "Leggi latenza",
-    "Write Latency": "Scrivi latenza",
-    "CPU Boost Clock": "Orologio di potenziamento della CPU",
-    "CPU UV": "UV della CPU",
+    "t6 tRTW Fine Tune": "Regolazione Fine t6 tRTW",
+    "tRTW Fine Tune": "Regolazione Fine tRTW",
+    "t7 tWTR Fine Tune": "Regolazione Fine t7 tWTR",
+    "tWTR Fine Tune": "Regolazione Fine tWTR",
+    "Memory Latencies": "Latenza della Memoria",
+    "Read Latency": "Latenza di Lettura",
+    "Write Latency": "Latenza di Scrittura",
+    "CPU Boost Clock": "Frequenza CPU in Boost",
+    "CPU UV": "Undervolt CPU",
     "CPU Unlock": "Sblocco della CPU",
-    "CPU VMIN": "CPUVMIN",
+    "CPU VMIN": "CPU VMIN",
     "CPU Max Voltage": "Voltaggio massimo della CPU",
-    "CPU Max Clock": "Orologio massimo della CPU",
-    "Extreme UV Table": "Tavolo UV estremo",
+    "CPU Max Clock": "Frequenza massima della CPU",
+    "Extreme UV Table": "Tabella UV estremo",
     "CPU UV Table": "Tabella UV della CPU",
-    "CPU Low UV": "CPU con raggi UV bassi",
-    "CPU High UV": "UV elevato della CPU",
-    "CPU Low VMIN": "VMIN CPU basso",
-    "CPU High VMIN": "CPU alta VMIN",
-    "No Undervolt": "Nessuna sottotensione",
+    "CPU Low UV": "CPU UV Bassa Frequenza",
+    "CPU High UV": "CPU UV Alta Frequenza",
+    "CPU Low VMIN": "CPU VMIN Bassa Frequenza",
+    "CPU High VMIN": "CPU VMIN Alta Frequenza",
+    "No Undervolt": "Nessun Undervolt",
     "SLT Table": "Tabella SLT",
     "HiOPT Table": "Tabella HiOPT",
-    "GPU Undervolt Table": "Tabella di sottotensione GPU",
-    "GPU Minimum Voltage": "Voltaggio minimo della GPU",
+    "GPU Undervolt Table": "Tabella di Undervolt GPU",
+    "GPU Minimum Voltage": "Voltaggio Minimo della GPU",
     "Calculate GPU Vmin": "Calcola GPU Vmin",
-    "GPU VMIN": "GPUVMIN",
+    "GPU VMIN": "GPU VMIN",
     "GPU Maximum Voltage": "Voltaggio massimo della GPU",
-    "GPU Voltage Offset": "Offset di tensione della GPU",
+    "GPU Voltage Offset": "Offset di Voltaggio della GPU",
     "Do not override": "Non sovrascrivere",
     "Enabled (Default)": "Abilitato (impostazione predefinita)",
     "96.6% limit": "Limite del 96,6%.",
     "99.7% limit": "Limite del 99,7%.",
-    "GPU Scheduling Override": "Override della pianificazione GPU",
+    "GPU Scheduling Override": "Override dello Scheduling GPU",
     "Official Service": "Servizio ufficiale",
     "GPU DVFS Mode": "Modalità DVFS GPU",
     "GPU DVFS Offset": "Offset DVFS della GPU",
-    "GPU Voltage Table": "Tabella delle tensioni della GPU",
-    "GPU Custom Table (mV)": "Tabella personalizzata GPU (mV)",
+    "GPU Voltage Table": "Tabella delle Tensioni della GPU",
+    "GPU Custom Table (mV)": "Tabella GPU Personalizzata (mV)",
     "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT",
     "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare",
-    "permanent damage to your Switch!": "danni permanenti al tuo Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz attivi",
+    "permanent damage to your Switch!": "danni permanenti alla tua Switch!",
+    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz su",
     "SLT or HiOPT can cause ": "SLT o HiOPT possono causare"
 }
diff --git a/dist/switch/.overlays/horizon-oc-overlay.ovl b/dist/switch/.overlays/horizon-oc-overlay.ovl
index 267196f0..1ae443fd 100644
Binary files a/dist/switch/.overlays/horizon-oc-overlay.ovl and b/dist/switch/.overlays/horizon-oc-overlay.ovl differ