ams.tma: restore tma code to debugger_dev branch

.github/ISSUE_TEMPLATE/bug_report.md

@@ -43,7 +43,7 @@ X.X.X</br>
 
 - What bootloader (fusèe, hekate, etc) was Atmosphère launched by:
 - Official release or unofficial build: 
-  - [ Official release version x.x.x (or) unofficial build ]
+  - [ Offical release version x.x.x (or) unofficial build ]
   - [ If using an unofficial build, include details on where/how you acquired the build. ] 
      - [ Ex: Self-compilation ]
      - [ Ex: Kosmos' distribution of Atmosphère ]

.gitignore

@@ -70,7 +70,6 @@ dkms.conf
 *.id1
 *.id2
 *.idb
-*.i64
 *.nam
 *.til
 

Makefile

@@ -50,12 +50,11 @@ dist: all
 	mkdir atmosphere-$(AMSVER)/atmosphere
 	mkdir atmosphere-$(AMSVER)/sept
 	mkdir atmosphere-$(AMSVER)/switch
-	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/010000000000000D
-	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000032
-	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000034
 	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000036
-	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000037
+	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000034
-	mkdir -p atmosphere-$(AMSVER)/atmosphere/fatal_errors
+	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000032
+	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000007
+	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/010000000000000D
 	cp fusee/fusee-primary/fusee-primary.bin atmosphere-$(AMSVER)/atmosphere/reboot_payload.bin
 	cp fusee/fusee-secondary/fusee-secondary.bin atmosphere-$(AMSVER)/atmosphere/fusee-secondary.bin
 	cp fusee/fusee-secondary/fusee-secondary.bin atmosphere-$(AMSVER)/sept/payload.bin
@@ -66,17 +65,14 @@ dist: all
 	cp common/defaults/loader.ini atmosphere-$(AMSVER)/atmosphere/loader.ini
 	cp common/defaults/system_settings.ini atmosphere-$(AMSVER)/atmosphere/system_settings.ini
 	cp -r common/defaults/kip_patches atmosphere-$(AMSVER)/atmosphere/kip_patches
-	cp -r common/defaults/hbl_html atmosphere-$(AMSVER)/atmosphere/hbl_html
-	cp stratosphere/dmnt/dmnt.nsp atmosphere-$(AMSVER)/atmosphere/titles/010000000000000D/exefs.nsp
-	cp stratosphere/eclct.stub/eclct.stub.nsp atmosphere-$(AMSVER)/atmosphere/titles/0100000000000032/exefs.nsp
-	cp stratosphere/fatal/fatal.nsp atmosphere-$(AMSVER)/atmosphere/titles/0100000000000034/exefs.nsp
 	cp stratosphere/creport/creport.nsp atmosphere-$(AMSVER)/atmosphere/titles/0100000000000036/exefs.nsp
-	cp stratosphere/ro/ro.nsp atmosphere-$(AMSVER)/atmosphere/titles/0100000000000037/exefs.nsp
+	cp stratosphere/fatal/fatal.nsp atmosphere-$(AMSVER)/atmosphere/titles/0100000000000034/exefs.nsp
+	cp stratosphere/eclct.stub/eclct.stub.nsp atmosphere-$(AMSVER)/atmosphere/titles/0100000000000032/exefs.nsp
+	cp troposphere/reboot_to_payload/reboot_to_payload.nro atmosphere-$(AMSVER)/switch/reboot_to_payload.nro
 	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000032/flags
 	touch atmosphere-$(AMSVER)/atmosphere/titles/0100000000000032/flags/boot2.flag
-	mkdir -p atmosphere-$(AMSVER)/atmosphere/titles/0100000000000037/flags
+	cp stratosphere/tma/tma.nsp atmosphere-$(AMSVER)/atmosphere/titles/0100000000000007/exefs.nsp
-	touch atmosphere-$(AMSVER)/atmosphere/titles/0100000000000037/flags/boot2.flag
+	cp stratosphere/dmnt/dmnt.nsp atmosphere-$(AMSVER)/atmosphere/titles/010000000000000D/exefs.nsp
-	cp troposphere/reboot_to_payload/reboot_to_payload.nro atmosphere-$(AMSVER)/switch/reboot_to_payload.nro
 	cd atmosphere-$(AMSVER); zip -r ../atmosphere-$(AMSVER).zip ./*; cd ../;
 	rm -r atmosphere-$(AMSVER)
 	mkdir out

common/defaults/hbl_html/accessible-urls/accessible-urls.txt

@@ -1 +0,0 @@
-^http*

common/defaults/loader.ini

@@ -1,8 +1,7 @@
 [hbl_config]
 title_id=010000000000100D
-override_any_app=true
 path=atmosphere/hbl.nsp
-override_key=R
+override_key=!R
 
 [default_config]
 override_key=!L

common/defaults/system_settings.ini

@@ -4,28 +4,8 @@ upload_enabled = u8!0x0
 ; Enable USB 3.0 superspeed for homebrew
 [usb]
 usb30_force_enabled = u8!0x0
-; Control whether RO should ease its validation of NROs.
-; (note: this is normally not necessary, and ips patches can be used.)
-[ro]
-ease_nro_restriction = u8!0x0
 ; Atmosphere custom settings
 [atmosphere]
-; Reboot from fatal automatically after some number of milliseconds.
-; If field is not present or 0, fatal will wait indefinitely for user input.
-fatal_auto_reboot_interval = u64!0x0
 ; Make the power menu's "reboot" button reboot to payload.
 ; Set to "normal" for normal reboot, "rcm" for rcm reboot.
 power_menu_reboot_function = str!payload
-; Controls whether dmnt cheats should be toggled on or off by 
-; default. 1 = toggled on by default, 0 = toggled off by default.
-dmnt_cheats_enabled_by_default = u8!0x1
-; Controls whether dmnt should always save cheat toggle state
-; for restoration on new game launch. 1 = always save toggles,
-; 0 = only save toggles if toggle file exists.
-dmnt_always_save_cheat_toggles = u8!0x0
-; Controls whether fs.mitm should redirect save files
-; to directories on the sd card.
-; 0 = Do not redirect, 1 = Redirect.
-; NOTE: EXPERIMENTAL
-; If you do not know what you are doing, do not touch this yet.
-fsmitm_redirect_saves_to_sd = u8!0x0

common/include/atmosphere.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

common/include/atmosphere/target_fw.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -25,12 +25,11 @@
 #define ATMOSPHERE_TARGET_FIRMWARE_600 6
 #define ATMOSPHERE_TARGET_FIRMWARE_620 7
 #define ATMOSPHERE_TARGET_FIRMWARE_700 8
-#define ATMOSPHERE_TARGET_FIRMWARE_800 9
 
-#define ATMOSPHERE_TARGET_FIRMWARE_CURRENT ATMOSPHERE_TARGET_FIRMWARE_800
+#define ATMOSPHERE_TARGET_FIRMWARE_CURRENT ATMOSPHERE_TARGET_FIRMWARE_700
 
 #define ATMOSPHERE_TARGET_FIRMWARE_MIN ATMOSPHERE_TARGET_FIRMWARE_100
-#define ATMOSPHERE_TARGET_FIRMWARE_MAX ATMOSPHERE_TARGET_FIRMWARE_800
+#define ATMOSPHERE_TARGET_FIRMWARE_MAX ATMOSPHERE_TARGET_FIRMWARE_700
 
 /* TODO: What should this be, for release? */
 #define ATMOSPHERE_TARGET_FIRMWARE_DEFAULT_FOR_DEBUG ATMOSPHERE_TARGET_FIRMWARE_CURRENT

common/include/atmosphere/version.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -19,9 +19,9 @@
 
 #define ATMOSPHERE_RELEASE_VERSION_MAJOR    0
 #define ATMOSPHERE_RELEASE_VERSION_MINOR    8
-#define ATMOSPHERE_RELEASE_VERSION_MICRO    9
+#define ATMOSPHERE_RELEASE_VERSION_MICRO    4
 
-#define ATMOSPHERE_SUPPORTED_HOS_VERSION_MAJOR 8
+#define ATMOSPHERE_SUPPORTED_HOS_VERSION_MAJOR 7
 #define ATMOSPHERE_SUPPORTED_HOS_VERSION_MINOR 0
 #define ATMOSPHERE_SUPPORTED_HOS_VERSION_MICRO 1
 

docs/building.md

@@ -1,8 +1,6 @@
 # Building Atmosphère
 The process for building Atmosphère is similar to building Fusée Gelée payloads and other Switch apps.
 
-In order to build Atmosphère you must have devkitARM and devkitA64 installed on your computer. You can find instructions on how to install and setup devkitARM and devkitA64 on various OSes [here](https://devkitpro.org/wiki/Getting_Started). You'll need to install the following packages via (dkp-)pacman: switch-dev switch-freetype devkitARM devkitarm-rules
+In order to build Atmosphère you must have devkitARM and devkitA64 installed on your computer. You can find instructions on how to install and setup devkitARM and devkitA64 on various OSes [here](https://devkitpro.org/wiki/Getting_Started).
 
-sept requires you have python installed with the pycrypto and pycryptodome PyPi packages (pip install pycrypto pycryptodome). You may also want to install the zip package from your package manager of choice to support the `make dist` recipe.
+Once you have finished installing devkitARM and devkitA64, simply clone the Atmosphère repo, change to it and run `make`.
-
-Once you have finished installing the devkitPro-provided toolchain/libraries, python, and the dependencies, simply clone the Atmosphère repo (clone with the -r flag), change your directory to it and run `make`.

docs/changelog.md

@@ -1,109 +1,4 @@
 # Changelog
-## 0.8.9
-+ A number of bugs were fixed, including:
-  + A data abort was fixed when mounting certain partitions on NAND.
-  + All Stratosphère system modules now only maintain a connection to `sm` when actively using it.
-    + This helps mitigate the scenario where sm hits the limit of 64 active connections and crashes.
-    + This sometimes caused crashes when custom non-Atmosphère sysmodules were active and the user played certain games (ex: Smash's Stage Builder).
-  + fatal now uses the 8.0.0 clkrst API, instead of silently failing to adjust clock rates on that firmware version.
-  + A wait loop is now performed when trying to get a session to `sm`, in the case where `sm:` is not yet registered.
-    + This fixes a race condition that could cause a failure to boot under certain circumstances.
-  + libstratosphere's handling of domain object closing has been improved.
-    + Previously, this code could cause crashes/extremely odd behavior (misinterpreting what object a service is) under certain circumstances.
-+ An optional automatic reboot timer was added to fatal.
-  + By setting the system setting `atmosphere!fatal_auto_reboot_interval` to a non-zero u64 value, fatal can be made to automatically reboot after a certain number of milliseconds.
-  + If the setting is zero or not present, fatal will wait for user input as usual.
-+ Atmosphère now provides a reimplementation of the `ro` system module.
-  + `ro` is responsible for loading dynamic libraries (NROs) on 3.0.0+.
-    + On 1.0.0-2.3.0, this is handled by `loader`.
-  + Atmosphere's `ro` provides this functionality (`ldr:ro`, `ro:dmnt`) on all firmware versions.
-  + An extension was implemented to provide support for applying IPS patches to NROs.
-    + All patches at paths like /atmosphere/nro_patches/<user-defined patch name>/<Hex Build-ID for NRO to patch>.ips will be applied, allowing for easy distribution of patches.
-    + Both the IPS and IPS32 formats are supported.
-+ Atmosphère now provides a reimplementation of the `spl` system module.
-  + `spl` (Secure Platform Services) is responsible for cryptographic operations, including all communications with the secure monitor (exosphère).
-  + In the future, this may be used to provide extensions to the API for interacting with exosphère from userland.
-+ General system stability improvements to enhance the user's experience.
-## 0.8.8
-+ Support was added for firmware version 8.0.0.
-+ Custom exception handlers were added to stratosphere modules.
-  + If a crash happens in a core atmosphere module now, instead of silently failing a reboot will occur to log the information to the SD card.
-+ A bug was fixed in creport that caused games to hang when crashing under certain circumstances.
-+ A bug was fixed that prevented maintenance mode from booting on 7.0.0+.
-+ General system stability improvements to enhance the user's experience.
-## 0.8.7
-+ A few bugs were fixed that could cause fatal to fail to show an error under certain circumstances.
-+ A bug was fixed that caused an error when launching certain games (e.g. Hellblade: Senua's Sacrifice).
-  + Loader had support added in ams-0.8.4 for a new (7.0.0+) flag bit in NPDMs during process creation, but forgot to allow this bit to be set when validating the NPDM.
-+ dmnt's cheat virtual machine received new instructions.
-  + These allow for saving, restoring, or clearing registers to a secondary bank, effectively doubling the number of values that can be stored.
-+ SHA256 code has been swapped from linux code to libnx's new hw-accelerated cryptography API.
-+ Extensions were added to smcGetInfo:
-  + A ConfigItem was added to detect whether the current unit has the RCM bug patched.
-  + A ConfigItem was added to retrieve the current Atmosphère build hash.
-+ Exosphère now tells the kernel to enable user-mode exception handlers, which should allow for better crash reporting/detection from Atmosphère's modules in the future..
-+ Opt-in support was added for redirecting game save files to directories on the SD card.
-  + Please note, this feature is **experimental**, and may cause problems. Please use at your own risk (and back up your saves before enabling it), as it still needs testing.
-  + This can be enabled by setting `atmosphere!fsmitm_redirect_saves_to_sd` to 1 in `system_settings.ini`.
-+ General system stability improvements to enhance the user's experience.
-## 0.8.6
-+ A number of bugs were fixed, including:
-  + A case of inverted logic was fixed in fs.mitm which prevented the flags system from working correctly.
-  + Time service access was corrected in both creport/fatal.
-    + This fixes the timestamps used in fatal/crash report filenames.
-  + A coherency issue was fixed in exosphère's Security Engine driver.
-    + This fixes some instability issues encountered when overclocking the CPU.
-  + Loader now unmaps NROs correctly, when ldr:ro is used.
-    + This fixes a crash when repeatedly launching the web applet on < 3.0.0.
-  + Usage of hidKeysDown was corrected to hidKeysHeld in several modules.
-    + This fixes a rare issue where keypresses may have been incorrectly detected.
-  + An issue with code filesystem unmounting was fixed in loader.
-    + This issue could occasionally cause a fatal error 0x1015 to be thrown on boot.
-  + Two bugs were fixed in the implementations of dmnt's cheat virtual machine.
-    + These could cause cheats to work incorrectly under certain circumstances.
-  + PM now uses a static buffer instead of a dynamically allocated one during process launch.
-    + This fixes a memory exhaustion problem when building with gcc 8.3.0.
-  + A workaround for a deadlock bug in Horizon's kernel on >= 6.0.0 was added in dmnt.
-    + This prevents a system hang when booting certain titles with cheats enabled (ex: Mario Kart 8 Deluxe).
-  + set.mitm now reads the system firmware version directly from the system version archive, instead of calling into set:sys.
-    + This fixes compatibility with 1.0.0, which now successfully boots again.
-+ dmnt's cheat virtual machine had some instruction set changes.
-  + A new opcode was added for beginning conditional blocks based on register contents.
-  + More addressing modes were added to the StoreRegisterToAddress opcode.
-  + These should allow for more complex cheats to be implemented.
-+ A new system for saving the state of cheat toggles between game boots was added.
-  + Toggles are now saved to `atmosphere/titles/<title id>/cheats/toggles.txt` when either toggles were successfully loaded from that file or the system setting `atmosphere!dmnt_always_save_cheat_toggles` is non-zero.
-  + This removes the need for manually setting cheats from all-on or all-off to the desired state on each game boot.
-+ The default behavior for loader's HBL support was changed.
-  + Instead of launching HBL when album is launched without R held, loader now launches HBL when album or any game is launched with R held.
-  + Loader will now override any app in addition to a specific title id when `hbl_config!override_any_app` is true in `loader.ini`.
-    + Accordingly, the `hbl_config!title_id=app` setting was deprecated. Support will be removed in Atmosphère 0.9.0.
-+ First-class support was added to loader and fs.mitm for enabling homebrew to launch web applets.
-  + Loader will now cause the "HtmlDocument" NCA path to resolve for whatever title HBL is taking over, even if it would not normally do so.
-  + fs.mitm will also now cause requests to mount the HtmlDocument content for HBL's title to open the `sdmc:/atmosphere/hbl_html` folder.
-    + By default, this just contains a URL whitelist.
-+ General system stability improvements to enhance the user's experience.
-## 0.8.5
-+ Support was added for overriding content on a per-title basis, separate from HBL override.
-  + This allows for using mods on the same title that one uses to launch HBL.
-  + By default, `!L` is used for title content override (this is configurable by editing `default_config!override_key` in `loader.ini`)
-  + This key combination can be set on a per-title basis by creating a `atmosphere/titles/<title id>/config.ini`, and editing `override_config!override_key`.
-+ Content headers were added for the embedded files inside of fusee-secondary.
-  + This will allow non-fusee bootloaders (like `hekate`) to extract the components bundled inside release binaries.
-  + This should greatly simplify the update process in the future, for users who do not launch Atmosphère using fusee.
-+ Support for cheat codes was added.
-  + These are handled by a new `dmnt` sysmodule, which will also reimplement Nintendo's Debug Monitor in the future.
-  + Cheat codes can be enabled/disabled at application launch via a per-title key combination. 
-    + For details, please see the [cheat loading documentation](https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/cheats.md#cheat-loating-process).
-  + Cheat codes are fully backwards compatible with the pre-existing format, although a number of bugs have been fixed and some new features have been added.
-    + For details, please see [the compatibility documentation](https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/cheats.md#cheat-code-compatibility).
-  + An HIPC service API was added (`dmnt:cht`), that will allow user homebrew to interface with and control Atmosphère's cheat manager.
-    + Please see [the relevant documentation](https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/modules/dmnt.md).
-    + Full client code can be found in [libstratosphere](https://github.com/Atmosphere-NX/libstratosphere/blob/master/include/stratosphere/services/dmntcht.h).
-    + Users interested in interfacing should see [EdiZon](https://github.com/WerWolv/EdiZon), which should have support for interfacing with Atmosphère's API shortly after 0.8.5 releases.
-+ A bug was fixed that would cause Atmosphère's fatal screen to not show on 1.0.0-2.3.0.
-+ A bug was fixed that caused Atmosphère's automatic ProdInfo backups to be corrupt.
-+ General system stability improvements to enhance the user's experience.
 ## 0.8.4
 + Support for 7.0.0/7.0.1 was added.
   + This is facilitated through a new payload, `sept`, which can be signed, encrypted, and then loaded by Nintendo's TSEC firmware.

docs/cheats.md

@@ -1,365 +0,0 @@
-# Cheats
-Atmosphère supports Action-Replay style cheat codes, with cheats loaded off of the SD card.
-
-## Cheat Loading Process
-By default, Atmosphère will do the following when deciding whether to attach to a new application process:
-
-+ Retrieve information about the new application process from `pm` and `loader`.
-+ Check whether a user-defined key combination is held, and stop if not.
-  + This defaults to "L is not held", and can be configured the same way as `fs.mitm` override keys.
-  + The ini key to configure this is `cheat_enable_key`.
-+ Check whether the process is a real application, and stop if not.
-  + This guards against applying cheat codes to the homebrew loader.
-+ Attempt to load cheats from `atmosphere/titles/<title_id>/cheats/<build_id>.txt`, where `build_id` is the hexadecimal representation of the first 8 bytes of the application's main executable's build id.
-  + If no cheats are found, then the cheat manager will stop.
-+ Open a kernel debug session for the new application process.
-+ Signal to a system event that a new cheat process has been attached to.
-
-This behavior ensures that cheat codes are only loaded when the user would want them to.
-
-In cases where dmnt has not activated the cheat manager, but the user wants to make it do so anyway, the cheat manager's service API provides a `ForceOpenCheatProcess` command that homebrew can use. This command will cause the cheat manager to try to force itself to attach to the process.
-
-By default, all cheat codes listed in the loaded .txt file will be toggled on. This is configurable by the user, and the default can be set to toggled off by editing the `atmosphere!dmnt_cheats_enabled_by_default` entry to 0 instead of 1.
-
-Users may use homebrew programs to toggle cheats on and off at runtime via the cheat manager's service API.
-
-## Cheat Code Compatibility
-
-Atmosphère manages cheat code through the execution of a small, custom virtual machine. Care has been taken to ensure that Atmosphère's cheat code format is fully backwards compatible with the pre-existing cheat code format, though new features have been added and bugs in the pre-existing cheat code applier have been fixed. Here is a short summary of the changes from the pre-existing format:
-
-+ A number of bugs were fixed in the processing of conditional instructions.
-  + The pre-existing implementation was fundamentally broken, and checked for the wrong value when detecting the end of a conditional block.
-  + The pre-existing implementation also did not properly decode instructions, and instead linearly scanned for the terminator value. This caused problems if an instruction happened to encode a terminator inside its immediate values.
-  + The pre-existing implementation did not bounds check, and thus certain conditional cheat codes could cause it to read out-of-bounds memory, and potentially crash due to a data abort.
-+ Support was added for nesting conditional blocks.
-+ An instruction was added to perform much more complex arbitrary arithmetic on two registers.
-+ An instruction was added to allow writing the contents of register to a memory address specified by another register.
-+ The pre-existing implementation did not correctly synchronize with the application process, and thus would cause heavy lag under certain circumstances (especially around loading screens). This has been fixed in Atmosphère's implementation.
-
-## Cheat Code Format
-
-The following provides documentation of the instruction format for the virtual machine used to manage cheat codes.
-
-Typically, instruction type is encoded in the upper nybble of the first instruction u32.
-
-### Code Type 0: Store Static Value to Memory
-
-Code type 0 allows writing a static value to a memory address.
-
-#### Encoding
-
-`0TMR00AA AAAAAAAA VVVVVVVV (VVVVVVVV)`
-
-+ T: width of memory write (1, 2, 4, or 8 bytes)
-+ M: memory region to write to (0 = Main NSO, 1 = Heap)
-+ R: Register to use as an offset from memory region base.
-+ A: Immediate offset to use from memory region base.
-+ V: Value to write.
-
----
-
-### Code Type 1: Begin Conditional Block
-
-Code type 1 performs a comparison of the contents of memory to a static value.
-
-If the condition is not met, all instructions until the appropriate conditional block terminator are skipped.
-
-#### Encoding
-
-`1TMC00AA AAAAAAAA VVVVVVVV (VVVVVVVV)`
-
-+ T: width of memory write (1, 2, 4, or 8 bytes)
-+ M: memory region to write to (0 = Main NSO, 1 = Heap)
-+ C: Condition to use, see below.
-+ A: Immediate offset to use from memory region base.
-+ V: Value to compare to.
-
-#### Conditions
-
-+ 1: >
-+ 2: >=
-+ 3: <
-+ 4: <=
-+ 5: ==
-+ 6: !=
-
----
-
-### Code Type 2: End Conditional Block
-
-Code type 2 marks the end of a conditional block (started by Code Type 1 or Code Type 8).
-
-#### Encoding
-
-`20000000`
-
----
-
-### Code Type 3: Start/End Loop
-
-Code type 3 allows for iterating in a loop a fixed number of times.
-
-#### Start Loop Encoding
-
-`300R0000 VVVVVVVV`
-
-+ R: Register to use as loop counter.
-+ V: Number of iterations to loop.
-
-#### End Loop Encoding
-
-`310R0000`
-
-+ R: Register to use as loop counter.
-
----
-
-### Code Type 4: Load Register with Static Value
-
-Code type 4 allows setting a register to a constant value.
-
-#### Encoding
-
-`400R0000 VVVVVVVV VVVVVVVV`
-
-+ R: Register to use.
-+ V: Value to load.
-
----
-
-### Code Type 5: Load Register with Memory Value
-
-Code type 5 allows loading a value from memory into a register, either using a fixed address or by dereferencing the destination register.
-
-#### Load From Fixed Address Encoding
-
-`5TMR00AA AAAAAAAA`
-
-+ T: width of memory read (1, 2, 4, or 8 bytes)
-+ M: memory region to write to (0 = Main NSO, 1 = Heap)
-+ R: Register to load value into.
-+ A: Immediate offset to use from memory region base.
-
-#### Load from Register Address Encoding
-
-`5TMR10AA AAAAAAAA`
-
-+ T: width of memory read (1, 2, 4, or 8 bytes)
-+ M: memory region to write to (0 = Main NSO, 1 = Heap)
-+ R: Register to load value into.
-+ A: Immediate offset to use from register R.
-
----
-
-### Code Type 6: Store Static Value to Register Memory Address
-
-Code type 6 allows writing a fixed value to a memory address specified by a register.
-
-#### Encoding
-
-`6T0RIor0 VVVVVVVV VVVVVVVV`
-
-+ T: width of memory write (1, 2, 4, or 8 bytes)
-+ R: Register used as base memory address.
-+ I: Increment register flag (0 = do not increment R, 1 = increment R by T).
-+ o: Offset register enable flag (0 = do not add r to address, 1 = add r to address).
-+ r: Register used as offset when o is 1.
-+ V: Value to write to memory.
-
----
-
-### Code Type 7: Legacy Arithmetic
-
-Code type 7 allows performing arithmetic on registers.
-
-However, it has been deprecated by Code type 9, and is only kept for backwards compatibility.
-
-#### Encoding
-
-`7T0RC000 VVVVVVVV`
-
-+ T: width of arithmetic operation (1, 2, 4, or 8 bytes)
-+ R: Register to apply arithmetic to.
-+ C: Arithmetic operation to apply, see below.
-+ V: Value to use for arithmetic operation.
-
-#### Arithmetic Types
-
-+ 0: Addition
-+ 1: Subtraction
-+ 2: Multiplication
-+ 3: Left Shift
-+ 4: Right Shift
-
----
-
-### Code Type 8: Begin Keypress Conditional Block
-
-Code type 8 enters or skips a conditional block based on whether a key combination is pressed.
-
-#### Encoding
-
-`8kkkkkkk`
-
-+ k: Keypad mask to check against, see below.
-
-Note that for multiple button combinations, the bitmasks should be ORd together.
-
-#### Keypad Values
-
-Note: This is the direct output of `hidKeysDown()`.
-
-+ 0000001: A
-+ 0000002: B
-+ 0000004: X
-+ 0000008: Y
-+ 0000010: Left Stick Pressed
-+ 0000020: Right Stick Pressed
-+ 0000040: L
-+ 0000080: R
-+ 0000100: ZL
-+ 0000200: ZR
-+ 0000400: Plus
-+ 0000800: Minus
-+ 0001000: Left
-+ 0002000: Up
-+ 0004000: Right
-+ 0008000: Down
-+ 0010000: Left Stick Left
-+ 0020000: Left Stick Up
-+ 0040000: Left Stick Right
-+ 0080000: Left Stick Down
-+ 0100000: Right Stick Left
-+ 0200000: Right Stick Up
-+ 0400000: Right Stick Right
-+ 0800000: Right Stick Down
-+ 1000000: SL
-+ 2000000: SR
-
----
-
-### Code Type 9: Perform Arithmetic
-
-Code type 9 allows performing arithmetic on registers.
-
-#### Register Arithmetic Encoding
-
-`9TCRS0s0`
-
-+ T: width of arithmetic operation (1, 2, 4, or 8 bytes)
-+ C: Arithmetic operation to apply, see below.
-+ R: Register to store result in.
-+ S: Register to use as left-hand operand.
-+ s: Register to use as right-hand operand.
-
-#### Immediate Value Arithmetic Encoding
-
-`9TCRS100 VVVVVVVV (VVVVVVVV)`
-
-+ T: width of arithmetic operation (1, 2, 4, or 8 bytes)
-+ C: Arithmetic operation to apply, see below.
-+ R: Register to store result in.
-+ S: Register to use as left-hand operand.
-+ V: Value to use as right-hand operand.
-
-#### Arithmetic Types
-
-+ 0: Addition
-+ 1: Subtraction
-+ 2: Multiplication
-+ 3: Left Shift
-+ 4: Right Shift
-+ 5: Logical And
-+ 6: Logical Or
-+ 7: Logical Not (discards right-hand operand)
-+ 8: Logical Xor
-+ 9: None/Move (discards right-hand operand)
-
----
-
-### Code Type 10: Store Register to Memory Address
-
-Code type 10 allows writing a register to memory.
-
-#### Encoding
-
-`ATSRIOxa (aaaaaaaa)`
-
-+ T: width of memory write (1, 2, 4, or 8 bytes)
-+ S: Register to write to memory.
-+ R: Register to use as base address.
-+ I: Increment register flag (0 = do not increment R, 1 = increment R by T).
-+ O: Offset type, see below.
-+ x: Register used as offset when O is 1, Memory type when O is 3, 4 or 5.
-+ a: Value used as offset when O is 2, 4 or 5.
-
-#### Offset Types
-
-+ 0: No Offset
-+ 1: Use Offset Register
-+ 2: Use Fixed Offset
-+ 3: Memory Region + Base Register
-+ 4: Memory Region + Relative Address (ignore address register)
-+ 5: Memory Region + Relative Address + Offset Register
----
-
-### Code Type 11: Reserved
-
-Code Type 11 is currently reserved for future use.
-
----
-
-### Code Type 12-15: Extended-Width Instruction
-
-Code Types 12-15 signal to the VM to treat the upper two nybbles of the first dword as instruction type, instead of just the upper nybble.
-
-This reserves an additional 64 opcodes for future use.
-
----
-
-### Code Type 0xC0: Begin Register Conditional Block
-
-Code type 0xC0 performs a comparison of the contents of a register and another value. This code support multiple operand types, see below.
-
-If the condition is not met, all instructions until the appropriate conditional block terminator are skipped.
-
-#### Encoding
-
-```
-C0TcSX##
-C0TcS0Ma aaaaaaaa
-C0TcS1Mr
-C0TcS2Ra aaaaaaaa
-C0TcS3Rr
-C0TcS400 VVVVVVVV (VVVVVVVV)
-C0TcS5X0
-```
-
-+ T: width of memory write (1, 2, 4, or 8 bytes)
-+ c: Condition to use, see below.
-+ S: Source Register
-+ X: Operand Type, see below.
-+ M: Memory Type (operand types 0 and 1)
-+ R: Address Register (operand types 2 and 3)
-+ a: Relative Address (operand types 0 and 2)
-+ r: Offset Register (operand types 1 and 3)
-+ X: Other Register (used for operand type 5)
-+ V: Value to compare to (operand type 4)
-
-#### Operand Type
-
-+ 0: Memory Base + Relative Offset
-+ 1: Memory Base + Offset Register
-+ 2: Register + Relative Offset
-+ 3: Register + Offset Register
-+ 4: Static Value
-+ 5: Other Register
-
-#### Conditions
-
-+ 1: >
-+ 2: >=
-+ 3: <
-+ 4: <=
-+ 5: ==
-+ 6: !=

docs/components/fusee/BCT.md

@@ -1,51 +1,19 @@
 # BCT.ini
-BCT.ini is the configuration file used by fusée-primary and fusée-secondary. It is read by fusee-primary.bin to setup and boot fusee-secondary.bin and is also read by fusee-secondary.bin to configure Exosphère, specify the environment it should boot, or configure other miscellaneous options such as setting a custom boot splashscreen.
+BCT.ini is the configuration file used by fusée-primary and fusée-secondary. It is read by fusee-primary.bin to setup and boot fusee-secondary.bin and is also read by fusee-secondary.bin to configure Exosphère or to specify the environment it should boot.
 
 ## Configuration
-This file is located in the `atmosphere` folder on your SD card. The default configuration file will look similar to this.
+This file is located at the root of your SD.
 ```
 BCT0
 [stage1]
-stage2_path = atmosphere/fusee-secondary.bin
+stage2_path = fusee-secondary.bin
 stage2_addr = 0xF0000000
 stage2_entrypoint = 0xF0000000
-
-[exosphere]
-; Note: Disabling debugmode will cause parts of ams.tma to not work, in the future.
-debugmode = 1 
-debugmode_user = 0
-
-[stratosphere]
-; To force-enable nogc, add nogc = 1
-; To force-disable nogc, add nogc = 0
 ```
-
+Add the following lines and replace the `X` according to the following list if you have trouble booting past the firmware version detection.
-## Adding a Custom Boot Splashscreen
-Add the following lines to BCT.ini and change the value of `custom_splash` to the actual path and filename of your boot splashscreen.
-```
-[stage2]
-custom_splash = /path/to/your/bootlogo.bmp
-```
-
-The boot splashscreen must be a BMP file, it must be 720x1280 (1280x720 rotated 90 degrees left/counterclockwise/anti-clockwise) resolution, and be in 32-bit ARGB format. You can use image editing software such as GIMP or Photoshop to export the image in this format.
-
-## Configuring "nogc" Protection
-Nogc is a feature provided by fusée-secondary which disables the Nintendo Switch's Game Card reader. Its purpose is to prevent the reader from being updated when the console has been updated without burning fuses from a firmware lower than 4.0.0, to a newer firmware that is at least 4.0.0 or higher. By default, Atmosphère will protect the Game Card reader automatically, but you are free to change it.
-
-To change its functionality, add the following line to the `stratosphere` section and change the value of `X` according to the following list.
-```
-nogc = X
-```
-```
-1 = force-enable nogc, so Atmosphère will always disable the Game Card reader.
-0 = force-disable nogc, so Atmosphère will always enable the Game Card reader.
-```
-
-
-## Changing Target Firmware
-Add the following line to the `exosphere` section and replace the `X` according to the following list if you have trouble booting past the firmware version detection.
 `target_firmware` is the OFW major version. 
 ```
+[exosphere]
 target_firmware = X
 ```
 ```
@@ -54,20 +22,5 @@ target_firmware = X
 3.X.X = 3
 4.X.X = 4
 5.X.X = 5
-6.X.X = 6
+6.0.0 = 6
-6.2.0 = 7
-7.X.X = 8
-```
-
-Note that 6.X.X indicates 6.0.0 through 6.1.0.
-
-## Configuring Debugging Modes
-By default, Atmosphère signals to the Horizon kernel that debugging is enabled while leaving usermode debugging disabled, since this can cause undesirable side-effects. If you wish to change these behaviours, go to the `exosphere` section and change the value of `X` according to the following list.
-```
-debugmode = X
-debugmode_user = X
-```
-```
-1 = enable
-0 = disable
 ```

docs/modules/dmnt.md

@@ -1,38 +0,0 @@
-# dmnt
-
-dmnt is a reimplementation of Nintendo's debug monitor. It provides Atmosphère a rich set of debugging functionality, so that users can easily analyze the behaviors of programs. In addition, Atmosphère implements an extension in dmnt to provide cheat code functionality.
-
-## Atmosphère Cheat Extension
-
-In addition to the functionality provided by Nintendo's debug monitor, Atmosphère's dmnt has an extension for providing cheat code functionality. A HIPC Service API is provided for interacting with the cheat code manager, through the service `dmnt:cht`.
-
-Those looking for more information on the cheat code functionality may wish to read `cheats.md`.
-
-The SwIPC definition for `dmnt:cht` follows.
-```
-interface DmntCheatService is dmnt:cht {
-  [65000] HasCheatProcess() -> bool;
-  [65001] GetCheatProcessEvent() -> KObject;
-  [65002] GetCheatProcessMetadata() -> CheatProcessMetadata;
-  [65003] ForceOpenCheatProcess();
-
-  [65100] GetCheatProcessMappingCount() -> u64;
-  [65101] GetCheatProcessMappings(u64 offset) -> buffer<MemoryInfo, 6>, u64 count;
-  [65102] ReadCheatProcessMemory(u64 address, u64 size) -> buffer<u8, 6> data;
-  [65103] WriteCheatProcessMemory(u64 address, u64 size, buffer<u8, 5> data);
-  [65104] QueryCheatProcessMemory(u64 address) -> MemoryInfo;
-
-  [65200] GetCheatCount() -> u64;
-  [65201] GetCheats(u64 offset) -> buffer<CheatEntry, 6>, u64 count;
-  [65202] GetCheatById(u32 cheat_id) -> buffer<CheatEntry, 6> cheat;
-  [65203] ToggleCheat(u32 cheat_id);
-  [65204] AddCheat(buffer<CheatDefinition, 5> cheat, bool enabled) -> u32 cheat_id;
-  [65203] RemoveCheat(u32 cheat_id);
-
-  [65300] GetFrozenAddressCount() -> u64;
-  [65301] GetFrozenAddresses(u64 offset) -> buffer<FrozenAddressEntry, 6>, u64 count;
-  [65302] GetFrozenAddress(u64 address) -> FrozenAddressEntry;
-  [65303] EnableFrozenAddress(u64 address, u64 width) -> u64 value;
-  [65304] DisableFrozenAddress(u64 address);
-}
-```

docs/modules/fs_mitm.md

@@ -1,2 +1,2 @@
 # fs_mitm
-fs_mitm is a sysmodule that enables intercepting file system operations. This module can log, deny, delay, replace, or redirect any request made to the filesystem. It enables LayeredFS to function, which allows for replacement of game assets.
+fs_mitm is a sysmodule that enables intercepting file system operations. This module can log, deny, delay, replace, or redirect any request made to the filesystem. It enables LayeredFS to function, which allows for game mods.

docs/modules/loader.md

@@ -55,38 +55,13 @@ When authoring patches, [hactool](https://github.com/SciresM/hactool) can be use
 
 Atmosphère can use the loader module in order to turn any game on your Switch's home menu into a launchpoint for the Homebrew Menu, rather than launching it through the album applet. This allows one to launch the Homebrew Menu with access to the ~3.2GB of RAM that the Switch reserves for games and applications, as opposed to the 442MB of RAM we are limited to when launching the Homebrew Menu from the album. This also means that it is no longer necessary to install homebrew as `.nsp` files on your Switch so long as you are using this method, as the only reason to do so is to allow the homebrew to access all of the Switch's available memory.
 
-In order to setup this method you will need the latest release of [hbmenu](https://github.com/switchbrew/nx-hbmenu/releases), and the latest release of [hbloader](https://github.com/switchbrew/nx-hbloader/releases). Place `hbmenu.nro` on the root of your Switch's SD Card, and place `hbl.nsp` in the atmosphere folder. From there, simply launch any title while holding the button specified in `loader.ini`.
+In order to setup this method you will need the latest release of [hbmenu](https://github.com/switchbrew/nx-hbmenu/releases), and the latest release of [hbloader](https://github.com/switchbrew/nx-hbloader/releases). Place `hbmenu.nro` on the root of your Switch's SD Card, and place `hbl.nsp` in the atmosphere folder. From there, simply configure `loader.ini` in the atmosphere folder by replacing the Title ID in the ini (title_id in the [hbl_config] section) (it is the Title ID for the album by default) with the Title ID of whatever game you wish to use to launch the Homebrew Menu. A list of Title IDs for Switch Games can be found [here](https://switchbrew.org/wiki/Title_list/Games). Afterwards you may reinsert your SD Card into your Switch and boot into Atmosphère as you normally would. You should now be able to boot into the Homebrew Menu by launching your designated game of choice.
-
-In addition, loader has extensions to enable homebrew to launch web applets. This normally requires the application launching the applet have HTML Manual content inside an installed NCA; Atmosphère's loader will automatically ensure that the commands used to check this succeed, and will (in tandem with `fs.mitm`) redirect the relevant filesystem to the `sdmc:/atmosphere/hbl_html/` subdirectory.
 
 ### Button Overrides
 
-By default `loader.ini` is configured to launch the Homebrew Menu when launching any game while holding down the override key (defaults to R). If you wish to change this, you can modify the override_key section of `loader.ini`. Alternatively, if you would like to only allow hbmenu on a specific app, configure `loader.ini` in the atmosphere folder by replacing the Title ID in the ini (title_id in the [hbl_config] section, it is the Title ID for the album by default) with the Title ID of whatever game you wish to use to launch the Homebrew Menu, and set override_any_app to false. A list of Title IDs for Switch Games can be found [here](https://switchbrew.org/wiki/Title_list/Games).
+By default `loader.ini` is configured to launch the Homebrew Menu when launching the game normally, and launching the game when selecting the game while holding down R. If you wish to change this, you can modify the override_key section of `loader.ini`. Placing an exclamation point in front of whatever button you wish to use will make it so that you will only launch the actual game while holding down that button, otherwise you will go into the Homebrew Menu. Removing the exclamation point will reverse this, meaning that you will boot into the Homebrew Menu only while holding down the assigned button when launching the game.
 
-To invert the behaviour of the override key, place an exclamation point in front of whatever button you wish to use. It will launch the actual game while holding down that button, instead of going into the Homebrew Menu. For example, `override_key=!R` will run the game only while holding down R when launching it, otherwise it will boot into the Homebrew Menu. Afterwards you may reinsert your SD Card into your Switch and boot into Atmosphère as you normally would. You should now be able to boot into the Homebrew Menu by launching your designated title of choice.
+For example, `override_key=!R` will run the game only while holding down R when launching it, otherwise it will boot into the Homebrew Menu. `override_key=R` will only boot into the Homebrew Menu while holding down R when launching the game, otherwise it will launch the game as normal.
-
-A list of valid buttons can be found here:
-
-| Formal Name | .ini Name |
-| ----------- | --------- |
-| A Button    | A         |
-| B Button    | B         |
-| X Button    | X         |
-| Y Button    | Y         |
-| Left Stick  | LS        |
-| Right Stick | RS        |
-| L Button    | L         |
-| R Button    | R         |
-| ZL Button   | ZL        |
-| ZR Button   | ZR        |
-| + Button    | PLUS      |
-| - Button    | MINUS     |
-| Left Dpad   | DLEFT     |
-| Up Dpad     | DUP       |
-| Right Dpad  | DRIGHT    |
-| Down Dpad   | DDOWN     |
-| SL Button   | SL        |
-| SR Button   | SR        |
 
 ### SM MITM Integration
 

docs/modules/set_mitm.md

@@ -50,30 +50,5 @@ upload_enabled = u8!0x0
 
 ### Atmosphère Custom Settings
 
-At the time of writing, Atmosphère implements two custom settings, found in the `atmosphere` section.\
+At present, Atmosphère implements no custom settings. However, this is subject to change in the future, and any\
-
+custom settings will be documented here as they are added.
-While not used for set_mitm, `power_menu_reboot_function` is loaded and controls the reboot behaviour of the console. By default, this value\
-is "payload", where the console will automatically reboot into the RCM payload stored in `sdmc:/atmosphere/reboot_payload.bin`.\
-(This payload is also used for fatal, upon a serious crash.) Setting the value to "rcm" reboots directly into RCM, and setting the value\
-to "normal" skips these behaviours.
-
-```
-[atmosphere]
-power_menu_reboot_function = str!payload
-```
-
-`dmnt_cheats_enabled_by_default` controls the behaviour of dmnt's cheat functionality. By default, this value is "0x1", enabling any cheats\
-defined by the user. Check [cheats](../cheats.md) for more information about Atmosphère's cheat functionality.
-
-```
-[atmosphere]
-dmnt_cheats_enabled_by_default = u8!0x1
-```
-
-`dmnt_always_save_cheat_toggles` controls the behaviour of dmnt's cheat toggle functionality. By default, this value is "0x0", causing toggles to\
-only be saved on game quit if a toggle file existed on game boot. Check [cheats](../cheats.md) for more information about Atmosphère's cheat functionality.
-
-```
-[atmosphere]
-dmnt_always_save_cheat_toggles = u8!0x0
-```

exosphere/Makefile

@@ -10,7 +10,6 @@ TOPDIR ?= $(CURDIR)
 include $(DEVKITPRO)/devkitA64/base_rules
 
 AMSBRANCH := $(shell git symbolic-ref --short HEAD)
-AMSHASH = $(shell git rev-parse --short=16 HEAD)
 AMSREV := $(AMSBRANCH)-$(shell git rev-parse --short HEAD)
 
 ifneq (, $(strip $(shell git status --porcelain 2>/dev/null)))
@@ -34,7 +33,7 @@ INCLUDES	:=	include ../common/include
 # options for code generation
 #---------------------------------------------------------------------------------
 ARCH	:=	-march=armv8-a -mtune=cortex-a57 -mgeneral-regs-only #<- important
-DEFINES	:=	-D__CCPLEX__ -DATMOSPHERE_GIT_BRANCH=\"$(AMSBRANCH)\" -DATMOSPHERE_GIT_REV=\"$(AMSREV)\" -DATMOSPHERE_RELEASE_VERSION_HASH="0x$(AMSHASH)"
+DEFINES	:=	-D__CCPLEX__ -DATMOSPHERE_GIT_BRANCH=\"$(AMSBRANCH)\" -DATMOSPHERE_GIT_REV=\"$(AMSREV)\"
 CFLAGS	:= \
 	-g \
 	-O2 \

exosphere/lp0fw/src/car.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/car.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/cluster.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/cluster.h

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/emc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/emc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/flow.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/flow.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/fuse.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/fuse.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/i2c.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/i2c.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/lp0.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/lp0.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/mc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/mc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/misc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/misc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/pmc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/se.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/se.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/secmon.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/secmon.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/start.s

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/sysreg.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/timer.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/lp0fw/src/utils.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/rebootstub/src/i2c.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/rebootstub/src/i2c.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/rebootstub/src/max77620.h

@@ -2,7 +2,7 @@
  * Defining registers address and its bit definitions of MAX77620 and MAX20024
  *
  * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/rebootstub/src/shutdown.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/rebootstub/src/start.s

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/rebootstub/src/timer.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/rebootstub/src/utils.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/emc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/emc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/i2c.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/i2c.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/pmc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/sc7.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/sc7.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/start.s

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/timer.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/sc7fw/src/utils.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/actmon.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/actmon.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/arm.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/arm.s

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/bootconfig.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -100,8 +100,6 @@ uint64_t bootconfig_get_value_for_sysctr0(void) {
 }
 
 uint64_t bootconfig_get_memory_arrangement(void) {
-    /* TODO: This function has changed pretty significantly since we implemented it. */
-    /* Not relevant for retail, but we'll probably want this to be accurate sooner or later. */
     if (bootconfig_is_debug_mode()) {
         if (fuse_get_dram_id() == 4) {
             if (LOADED_BOOTCONFIG->unsigned_config.data[0x23]) {
@@ -125,7 +123,7 @@ uint64_t bootconfig_get_memory_arrangement(void) {
     }
 }
 
-uint64_t bootconfig_get_kernel_configuration(void) {
+uint64_t bootconfig_get_kernel_memory_configuration(void) {
     if (bootconfig_is_debug_mode()) {
         uint64_t high_val = 0;
         if (fuse_get_dram_id() == 4) {

exosphere/src/bootconfig.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -21,14 +21,6 @@
 #include <stdint.h>
 #include "memory_map.h"
 
-/* This is kind of ConfigItem, but it's stored in BootConfig, so... */
-typedef enum {
-    KERNELCONFIGFLAG_INITIALIZE_MEMORY_TO_PATTERN   = (1 << 0),
-    KERNELCONFIGFLAG_ENABLE_USER_EXCEPTION_HANDLERS = (1 << 1),
-    KERNELCONFIGFLAG_ENABLE_USER_PMU_ACCESS         = (1 << 2),
-    KERNELCONFIGFLAG_CALL_SMC_PANIC_ON_KERNEL_ERROR = (1 << 8),
-} KernelConfigFlag;
-
 /* This provides management for Switch BootConfig. */
 
 #define LOADED_BOOTCONFIG (get_loaded_bootconfig())
@@ -86,7 +78,7 @@ bool bootconfig_take_extabt_serror_to_el3(void);
 uint64_t bootconfig_get_value_for_sysctr0(void);
 
 uint64_t bootconfig_get_memory_arrangement(void);
-uint64_t bootconfig_get_kernel_configuration(void);
+uint64_t bootconfig_get_kernel_memory_configuration(void);
 
 bool bootconfig_is_recovery_boot(void);
 uint64_t bootconfig_get_boot_reason(void);

exosphere/src/bootup.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/bootup.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/bpmp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/car.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/car.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/coldboot_init.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/coldboot_main.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/configitem.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -35,13 +35,13 @@
 #undef u8
 #undef u32
 
-static bool g_hiz_mode_enabled = false;
+static bool g_battery_profile = false;
 static bool g_debugmode_override_user = false, g_debugmode_override_priv = false;
 
 uint32_t configitem_set(bool privileged, ConfigItem item, uint64_t value) {
     switch (item) {
-        case CONFIGITEM_HIZMODE:
+        case CONFIGITEM_BATTERYPROFILE:
-            g_hiz_mode_enabled = (value != 0);
+            g_battery_profile = (value != 0);
             break;
         case CONFIGITEM_NEEDS_REBOOT:
             /* Force a reboot, if requested. */
@@ -133,12 +133,8 @@ bool configitem_is_retail(void) {
     return is_retail != 0;
 }
 
-bool configitem_is_hiz_mode_enabled(void) {
+bool configitem_should_profile_battery(void) {
-    return g_hiz_mode_enabled;
+    return g_battery_profile;
-}
-
-void configitem_set_hiz_mode_enabled(bool enabled) {
-    g_hiz_mode_enabled = enabled;
 }
 
 bool configitem_is_debugmode_priv(void) {
@@ -210,16 +206,11 @@ uint32_t configitem_get(bool privileged, ConfigItem item, uint64_t *p_outvalue)
                 *p_outvalue = (int)(bootconfig_is_debug_mode());
             }
             break;
-        case CONFIGITEM_KERNELCONFIGURATION:
+        case CONFIGITEM_KERNELMEMORYCONFIGURATION:
-            {
+            *p_outvalue = bootconfig_get_kernel_memory_configuration();
-                uint64_t config = bootconfig_get_kernel_configuration();
-                /* Always enable usermode exception handlers. */
-                config |= KERNELCONFIGFLAG_ENABLE_USER_EXCEPTION_HANDLERS;
-                *p_outvalue = config;
-            }
             break;
-        case CONFIGITEM_HIZMODE:
+        case CONFIGITEM_BATTERYPROFILE:
-            *p_outvalue = (int)g_hiz_mode_enabled;
+            *p_outvalue = (int)g_battery_profile;
             break;
         case CONFIGITEM_ISQUESTUNIT:
             /* Added on 3.0, used to determine whether console is a kiosk unit. */
@@ -269,14 +260,6 @@ uint32_t configitem_get(bool privileged, ConfigItem item, uint64_t *p_outvalue)
             /* UNOFFICIAL: The fact that we are executing means we aren't in the process of shutting down. */
             *p_outvalue = 0;
             break;
-        case CONFIGITEM_EXOSPHERE_VERHASH:
-            /* UNOFFICIAL: Gets information about the current exosphere git commit hash. */
-            *p_outvalue = ATMOSPHERE_RELEASE_VERSION_HASH;
-            break;
-        case CONFIGITEM_HAS_RCM_BUG_PATCH:
-            /* UNOFFICIAL: Gets whether this unit has the RCM bug patched. */
-            *p_outvalue = (int)(fuse_has_rcm_bug_patch());;
-            break;
         default:
             result = 2;
             break;

exosphere/src/configitem.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -32,8 +32,8 @@ typedef enum {
     CONFIGITEM_BOOTREASON = 9,
     CONFIGITEM_MEMORYARRANGE = 10,
     CONFIGITEM_ISDEBUGMODE = 11,
-    CONFIGITEM_KERNELCONFIGURATION = 12,
+    CONFIGITEM_KERNELMEMORYCONFIGURATION = 12,
-    CONFIGITEM_HIZMODE = 13,
+    CONFIGITEM_BATTERYPROFILE = 13,
     CONFIGITEM_ISQUESTUNIT = 14,
     CONFIGITEM_NEWHARDWARETYPE_5X = 15,
     CONFIGITEM_NEWKEYGENERATION_5X = 16,
@@ -43,8 +43,6 @@ typedef enum {
     CONFIGITEM_EXOSPHERE_VERSION = 65000,
     CONFIGITEM_NEEDS_REBOOT = 65001,
     CONFIGITEM_NEEDS_SHUTDOWN = 65002,
-    CONFIGITEM_EXOSPHERE_VERHASH = 65003,
-    CONFIGITEM_HAS_RCM_BUG_PATCH = 65004,
 } ConfigItem;
 
 #define REBOOT_KIND_NO_REBOOT     0
@@ -56,11 +54,10 @@ uint32_t configitem_get(bool privileged, ConfigItem item, uint64_t *p_outvalue);
 
 bool configitem_is_recovery_boot(void);
 bool configitem_is_retail(void);
-bool configitem_is_hiz_mode_enabled(void);
+bool configitem_should_profile_battery(void);
 bool configitem_is_debugmode_priv(void);
 
 void configitem_set_debugmode_override(bool user, bool priv);
-void configitem_set_hiz_mode_enabled(bool enabled);
 
 uint64_t configitem_get_hardware_type(void);
 

exosphere/src/cpu_context.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/cpu_context.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/exocfg.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/exocfg.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/flow.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/fuse.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -23,10 +23,6 @@
 #include "exocfg.h"
 
 #include "masterkey.h"
-
-static bool g_has_checked_for_rcm_bug_patch = false;
-static bool g_has_rcm_bug_patch = false;
-
 /* Prototypes for internal commands. */
 void fuse_make_regs_visible(void);
 
@@ -41,11 +37,6 @@ void fuse_init(void)
     fuse_secondary_private_key_disable();
     fuse_disable_programming();
 
-    /* TODO: Should we allow this to be done later? */
-    if (!g_has_checked_for_rcm_bug_patch) {
-        (void)(fuse_has_rcm_bug_patch());
-    }
-
     /* TODO: Overrides (iROM patches) and various reads happen here */
 }
 
@@ -266,39 +257,3 @@ void fuse_get_hardware_info(void *dst) {
 
     memcpy(dst, hw_info, 0x10);
 }
-
-bool fuse_has_rcm_bug_patch(void) {
-    /* Only check for RCM bug patch once, and cache our result. */
-    if (!g_has_checked_for_rcm_bug_patch) {
-        /* Patched units have this bit set in reserved_sw, according to reports. */
-        if (FUSE_CHIP_REGS->FUSE_RESERVED_SW & 0x80) {
-            g_has_rcm_bug_patch = true;
-        }
-
-        /* Also check for an ipatch. */
-        {
-            uint32_t word_count = FUSE_CHIP_REGS->FUSE_FIRST_BOOTROM_PATCH_SIZE & 0x7f;
-            uint32_t word_addr = 191;
-
-            while (word_count) {
-                uint32_t word0 = fuse_hw_read(word_addr);
-                uint32_t ipatch_count = (word0 >> 16) & 0xf;
-
-                for (uint32_t i = 0; i < ipatch_count; i++) {
-                    uint32_t word = fuse_hw_read(word_addr - (i + 1));
-                    uint32_t addr = (word >> 16) * 2;
-
-                    if (addr == 0x769a) {
-                        g_has_rcm_bug_patch = true;
-                    }
-                }
-
-                word_addr -= word_count;
-                word_count = word0 >> 25;
-            }
-        }
-    }
-    g_has_checked_for_rcm_bug_patch = true;
-
-    return g_has_rcm_bug_patch;
-}

exosphere/src/fuse.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -74,7 +74,7 @@ typedef struct {
     uint32_t FUSE_CP_REV;
     uint32_t _0x94;
     uint32_t FUSE_TSENSOR_0;
-    uint32_t FUSE_FIRST_BOOTROM_PATCH_SIZE;
+    uint32_t FUSE_FIRST_BOOTROM_PATCH_SIZE_REG;
     uint32_t FUSE_SECURITY_MODE;
     uint32_t FUSE_PRIVATE_KEY[0x4];
     uint32_t FUSE_DEVICE_KEY;
@@ -215,6 +215,4 @@ uint32_t fuse_get_hardware_type(void);
 uint32_t fuse_get_retail_type(void);
 void fuse_get_hardware_info(void *dst);
 
-bool fuse_has_rcm_bug_patch(void);
-
 #endif

exosphere/src/gcm.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/gcm.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/i2c.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/i2c.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/interrupt.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/interrupt.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/masterkey.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/masterkey.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/mc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -140,19 +140,13 @@ void configure_kernel_carveout(unsigned int carveout_id, uint64_t address, uint6
     carveout->size_big_pages = (uint32_t)(size >> 17);
     carveout->client_access_0 = (BIT(CSR_PTCR) | BIT(CSR_DISPLAY0A) | BIT(CSR_DISPLAY0AB) | BIT(CSR_DISPLAY0B) | BIT(CSR_DISPLAY0BB) | BIT(CSR_DISPLAY0C) | BIT(CSR_DISPLAY0CB) | BIT(CSR_AFIR) | BIT(CSR_DISPLAYHC) | BIT(CSR_DISPLAYHCB) | BIT(CSR_HDAR) | BIT(CSR_HOST1XDMAR) | BIT(CSR_HOST1XR) | BIT(CSR_NVENCSRD) | BIT(CSR_PPCSAHBDMAR) | BIT(CSR_PPCSAHBSLVR));
     carveout->client_access_1 = (BIT(CSR_MPCORER) | BIT(CSW_NVENCSWR) | BIT(CSW_AFIW) | BIT(CSW_HDAW) | BIT(CSW_HOST1XW) | BIT(CSW_MPCOREW) | BIT(CSW_PPCSAHBDMAW) | BIT(CSW_PPCSAHBSLVW));
-    if (exosphere_get_target_firmware() >= ATMOSPHERE_TARGET_FIRMWARE_800) {
+    carveout->client_access_2 = (BIT(CSR_XUSB_HOSTR) | BIT(CSW_XUSB_HOSTW) | BIT(CSR_XUSB_DEVR) | BIT(CSW_XUSB_DEVW) | BIT(CSR_TSECSRD) | BIT(CSW_TSECSWR));
-        carveout->client_access_2 = (BIT(CSR_XUSB_HOSTR) | BIT(CSW_XUSB_HOSTW) | BIT(CSR_XUSB_DEVR) | BIT(CSW_XUSB_DEVW)); 
+    carveout->client_access_3 = (BIT(CSR_SDMMCRA) | BIT(CSR_SDMMCRAA) | BIT(CSR_SDMMCRAB) | BIT(CSW_SDMMCWA) | BIT(CSW_SDMMCWAA) | BIT(CSW_SDMMCWAB) | BIT(CSR_VICSRD) | BIT(CSW_VICSWR) | BIT(CSR_DISPLAYD) | BIT(CSR_NVDECSRD) | BIT(CSW_NVDECSWR) | BIT(CSR_APER) | BIT(CSW_APEW) | BIT(CSR_NVJPGSRD) | BIT(CSW_NVJPGSWR));
-        carveout->client_access_3 = (BIT(CSR_SDMMCRA) | BIT(CSR_SDMMCRAA) | BIT(CSR_SDMMCRAB) | BIT(CSW_SDMMCWA) | BIT(CSW_SDMMCWAA) | BIT(CSW_SDMMCWAB) | BIT(CSR_VICSRD) | BIT(CSW_VICSWR) | BIT(CSR_DISPLAYD) | BIT(CSR_NVDECSRD) | BIT(CSW_NVDECSWR) | BIT(CSR_APER) | BIT(CSW_APEW) | BIT(CSR_NVJPGSRD) | BIT(CSW_NVJPGSWR));
+    carveout->client_access_4 = (BIT(CSR_SESRD) | BIT(CSW_SESWR));
-        carveout->client_access_4 = (BIT(CSR_SESRD) | BIT(CSW_SESWR) | BIT(CSR_TSECSRDB) | BIT(CSW_TSECSWRB));
-    } else {
-        carveout->client_access_2 = (BIT(CSR_XUSB_HOSTR) | BIT(CSW_XUSB_HOSTW) | BIT(CSR_XUSB_DEVR) | BIT(CSW_XUSB_DEVW) | BIT(CSR_TSECSRD) | BIT(CSW_TSECSWR));
-        carveout->client_access_3 = (BIT(CSR_SDMMCRA) | BIT(CSR_SDMMCRAA) | BIT(CSR_SDMMCRAB) | BIT(CSW_SDMMCWA) | BIT(CSW_SDMMCWAA) | BIT(CSW_SDMMCWAB) | BIT(CSR_VICSRD) | BIT(CSW_VICSWR) | BIT(CSR_DISPLAYD) | BIT(CSR_NVDECSRD) | BIT(CSW_NVDECSWR) | BIT(CSR_APER) | BIT(CSW_APEW) | BIT(CSR_NVJPGSRD) | BIT(CSW_NVJPGSWR));
-        carveout->client_access_4 = (BIT(CSR_SESRD) | BIT(CSW_SESWR));
-    }
     carveout->client_force_internal_access_0 = ((exosphere_get_target_firmware() >= ATMOSPHERE_TARGET_FIRMWARE_400) && (carveout_id == 4)) ? BIT(CSR_AVPCARM7R) : 0;
     carveout->client_force_internal_access_1 = ((exosphere_get_target_firmware() >= ATMOSPHERE_TARGET_FIRMWARE_400) && (carveout_id == 4)) ? BIT(CSW_AVPCARM7W) : 0;
     carveout->client_force_internal_access_2 = 0;
     carveout->client_force_internal_access_3 = 0;
     carveout->client_force_internal_access_4 = 0;
-    carveout->config = (exosphere_get_target_firmware() >= ATMOSPHERE_TARGET_FIRMWARE_800) ? 0x4CB : 0x8B;
+    carveout->config = 0x8B;
 }

exosphere/src/mc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/memory_map.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/misc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/mmu.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,

exosphere/src/package2.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2019 Atmosphère-NX
+ * Copyright (c) 2018 Atmosphère-NX
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -144,7 +144,6 @@ static void setup_se(void) {
                 master_kek_source_ind = MASTERKEY_REVISION_620 - MASTERKEY_REVISION_620;
                 break;
             case ATMOSPHERE_TARGET_FIRMWARE_700:
-            case ATMOSPHERE_TARGET_FIRMWARE_800:
                 master_kek_source_ind = MASTERKEY_REVISION_700_CURRENT - MASTERKEY_REVISION_620;
                 break;
             default:
@@ -180,7 +179,6 @@ static void setup_se(void) {
         case ATMOSPHERE_TARGET_FIRMWARE_600:
         case ATMOSPHERE_TARGET_FIRMWARE_620:
         case ATMOSPHERE_TARGET_FIRMWARE_700:
-        case ATMOSPHERE_TARGET_FIRMWARE_800:
             derive_new_device_keys(KEYSLOT_SWITCH_5XNEWDEVICEKEYGENKEY);
             break;
     }
@@ -336,15 +334,10 @@ static bool validate_package2_metadata(package2_meta_t *metadata) {
         }
 
         /* Ensure no overlap with later sections. */
-        if (metadata->section_sizes[section] != 0) {
+        for (unsigned int later_section = section + 1; later_section < PACKAGE2_SECTION_MAX; later_section++) {
-            for (unsigned int later_section = section + 1; later_section < PACKAGE2_SECTION_MAX; later_section++) {
+            uint32_t later_section_end = metadata->section_offsets[later_section] + metadata->section_sizes[later_section];
-                if (metadata->section_sizes[later_section] == 0) {
+            if (overlaps(metadata->section_offsets[section], section_end, metadata->section_offsets[later_section], later_section_end)) {
-                    continue;
+                return false;
-                }
-                uint32_t later_section_end = metadata->section_offsets[later_section] + metadata->section_sizes[later_section];
-                if (overlaps(metadata->section_offsets[section], section_end, metadata->section_offsets[later_section], later_section_end)) {
-                    return false;
-                }
             }
         }
 
@@ -494,7 +487,6 @@ static void copy_warmboot_bin_to_dram() {
             warmboot_src = (uint8_t *)0x4003D800;
             break;
         case ATMOSPHERE_TARGET_FIRMWARE_700:
-        case ATMOSPHERE_TARGET_FIRMWARE_800:
             warmboot_src = (uint8_t *)0x4003E000;
             break;
     }
@@ -562,7 +554,6 @@ void load_package2(coldboot_crt0_reloc_list_t *reloc_list) {
                 MAKE_REG32(PMC_BASE + 0x360) = 0xA8;
                 break;
             case ATMOSPHERE_TARGET_FIRMWARE_700:
-            case ATMOSPHERE_TARGET_FIRMWARE_800:
                 MAKE_REG32(PMC_BASE + 0x360) = 0x129;
                 break;
         }