OmniNX/AllgemeinerProblemLoeser
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Start rewrite

Browse Source 
- Rewrite everything
- Starting with up-to-date lockpickrcm
This commit is contained in:
Such Meme, Many Skill
2019-11-21 16:02:45 +01:00
parent e8ddc9cf2f
commit ff062a232b
95 changed files with 7043 additions and 1844 deletions
Download Patch File Download Diff File Expand all files Collapse all files

112
source/gfx/di.c
View File

@@ -18,15 +18,16 @@
#include <string.h>
#include "di.h"
#include "../soc/t210.h"
#include "../utils/util.h"
#include "../soc/i2c.h"
#include "../soc/pmc.h"
#include "../gfx/gfx.h"
#include "../power/max77620.h"
#include "../power/max7762x.h"
#include "../soc/gpio.h"
#include "../soc/pinmux.h"
#include "../soc/clock.h"
#include "../soc/gpio.h"
#include "../soc/i2c.h"
#include "../soc/pinmux.h"
#include "../soc/pmc.h"
#include "../soc/t210.h"
#include "../utils/util.h"
#include "di.inl"
@@ -46,54 +47,61 @@ void display_init()
max77620_regulator_set_volt_and_flags(REGULATOR_LDO0, 1200000, MAX77620_POWER_MODE_NORMAL); // Configure to 1.2V.
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO7, MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH | MAX77620_CNFG_GPIO_DRV_PUSHPULL);
// Enable MIPI CAL, DSI, DISP1, HOST1X, UART_FST_MIPI_CAL, DSIA LP clocks.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x1010000;
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = 0x1010000;
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = 0x18000000;
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = 0x18000000;
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = 0x20000;
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIP_CAL) = 0xA;
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = 0x80000;
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 0xA;
// Enable Display Interface specific clocks.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x1010000; // Clear reset DSI, MIPI_CAL.
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = 0x1010000; // Set enable clock DSI, MIPI_CAL.
// DPD idle.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = 0x18000000; // Clear reset DISP1, HOST1X.
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = 0x18000000; // Set enable clock DISP1, HOST1X.
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = 0x20000; // Set enable clock UART_FST_MIPI_CAL.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL) = 10; // Set PLLP_OUT3 and div 6 (17MHz).
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = 0x80000; // Set enable clock DSIA_LP.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 10; // Set PLLP_OUT and div 6 (68MHz).
// Disable deap power down.
PMC(APBDEV_PMC_IO_DPD_REQ) = 0x40000000;
PMC(APBDEV_PMC_IO_DPD2_REQ) = 0x40000000;
// Config pins.
// Config LCD and Backlight pins.
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE;
gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO); // Backlight +-5V.
gpio_output_enable(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_OUTPUT_ENABLE); // Backlight +-5V.
// Set Backlight +-5V pins mode and direction
gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_OUTPUT_ENABLE);
// Enable Backlight power.
gpio_write(GPIO_PORT_I, GPIO_PIN_0, GPIO_HIGH); // Backlight +5V enable.
usleep(10000);
gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_HIGH); // Backlight -5V enable.
usleep(10000);
gpio_config(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_MODE_GPIO); // Backlight PWM, Enable, Reset.
// Configure Backlight pins (PWM, EN, RST).
gpio_config(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_OUTPUT_ENABLE);
gpio_write(GPIO_PORT_V, GPIO_PIN_1, GPIO_HIGH); // Backlight Enable enable.
gpio_write(GPIO_PORT_V, GPIO_PIN_1, GPIO_HIGH); // Enable Backlight EN.
// Config display interface and display.
// Power up supply regulator for display interface.
MIPI_CAL(MIPI_CAL_MIPI_BIAS_PAD_CFG2) = 0;
// Set DISP1 clock source and parrent clock.
exec_cfg((u32 *)CLOCK_BASE, _display_config_1, 4);
// Setup display communication interfaces.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_2, 94);
exec_cfg((u32 *)DSI_BASE, _display_config_3, 61);
usleep(10000);
gpio_write(GPIO_PORT_V, GPIO_PIN_2, GPIO_HIGH); // Backlight Reset enable.
// Enable Backlight Reset.
gpio_write(GPIO_PORT_V, GPIO_PIN_2, GPIO_HIGH);
usleep(60000);
// Setups DSI packet configuration and request display id.
DSI(_DSIREG(DSI_BTA_TIMING)) = 0x50204;
DSI(_DSIREG(DSI_WR_DATA)) = 0x337; // MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE
DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
@@ -122,19 +130,22 @@ void display_init()
usleep(20000);
// Configure PLLD for DISP1.
exec_cfg((u32 *)CLOCK_BASE, _display_config_6, 3);
// Finalize DSI configuration.
exec_cfg((u32 *)DSI_BASE, _display_config_5, 21);
DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = 4;
exec_cfg((u32 *)DSI_BASE, _display_config_7, 10);
usleep(10000);
// Calibrate display communication pads.
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_8, 6);
exec_cfg((u32 *)DSI_BASE, _display_config_9, 4);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_10, 16);
usleep(10000);
// Enable video display controller.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_11, 113);
}
@@ -142,11 +153,10 @@ void display_backlight_pwm_init()
{
clock_enable_pwm();
PWM(PWM_CONTROLLER_PWM_CSR_0) = (1 << 31); // Enable PWM
PWM(PWM_CONTROLLER_PWM_CSR_0) = PWM_CSR_EN; // Enable PWM and set it to 25KHz PFM.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) >> 2) << 2 | 1; // PWM clock source.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & 0xFFFFFFFC) | 1; // PWM clock source.
gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight power mode.
}
void display_backlight(bool enable)
@@ -167,7 +177,7 @@ void display_backlight_brightness(u32 brightness, u32 step_delay)
{
for (u32 i = old_value; i < brightness + 1; i++)
{
PWM(PWM_CONTROLLER_PWM_CSR_0) = (1 << 31) | (i << 16); // Enable PWM
PWM(PWM_CONTROLLER_PWM_CSR_0) = PWM_CSR_EN | (i << 16); // Enable PWM and set it to 25KHz PFM.
usleep(step_delay);
}
}
@@ -175,7 +185,7 @@ void display_backlight_brightness(u32 brightness, u32 step_delay)
{
for (u32 i = old_value; i > brightness; i--)
{
PWM(PWM_CONTROLLER_PWM_CSR_0) = (1 << 31) | (i << 16); // Enable PWM
PWM(PWM_CONTROLLER_PWM_CSR_0) = PWM_CSR_EN | (i << 16); // Enable PWM and set it to 25KHz PFM.
usleep(step_delay);
}
}
@@ -191,13 +201,14 @@ void display_end()
DSI(_DSIREG(DSI_WR_DATA)) = 0x2805; // MIPI_DCS_SET_DISPLAY_OFF
DISPLAY_A(_DIREG(DC_CMD_STATE_ACCESS)) = READ_MUX | WRITE_MUX;
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0;
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0; // Disable host cmd packet.
// De-initialize video controller.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_12, 17);
exec_cfg((u32 *)DSI_BASE, _display_config_13, 16);
usleep(10000);
// De-initialize display panel.
if (_display_ver == 0x10)
exec_cfg((u32 *)DSI_BASE, _display_config_14, 22);
@@ -206,31 +217,31 @@ void display_end()
usleep(50000);
// Disable display and backlight pins.
gpio_write(GPIO_PORT_V, GPIO_PIN_2, GPIO_LOW); //Backlight Reset disable.
usleep(10000);
gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_LOW); //Backlight -5V disable.
usleep(10000);
gpio_write(GPIO_PORT_I, GPIO_PIN_0, GPIO_LOW); //Backlight +5V disable.
usleep(10000);
// Disable clocks.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_SET) = 0x1010000;
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_CLR) = 0x1010000;
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = 0x18000000;
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = 0x18000000;
// Disable Display Interface specific clocks.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_SET) = 0x1010000; // Set reset clock DSI, MIPI_CAL.
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_CLR) = 0x1010000; // Clear enable clock DSI, MIPI_CAL.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = 0x18000000; // Set reset DISP1, HOST1X.
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = 0x18000000; // Clear enable DISP1, HOST1X.
// Power down pads.
DSI(_DSIREG(DSI_PAD_CONTROL_0)) = DSI_PAD_CONTROL_VS1_PULLDN_CLK | DSI_PAD_CONTROL_VS1_PULLDN(0xF) | DSI_PAD_CONTROL_VS1_PDIO_CLK | DSI_PAD_CONTROL_VS1_PDIO(0xF);
DSI(_DSIREG(DSI_POWER_CONTROL)) = 0;
// Switch to automatic function mode.
gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight PWM.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_TRISTATE) | PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) >> 2) << 2 | 1;
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & 0xFFFFFFFC)| 1;
}
void display_color_screen(u32 color)
@@ -243,7 +254,6 @@ void display_color_screen(u32 color)
DISPLAY_A(_DIREG(DC_WIN_CD_WIN_OPTIONS)) = 0;
DISPLAY_A(_DIREG(DC_DISP_BLEND_BACKGROUND_COLOR)) = color;
DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = (DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) & 0xFFFFFFFE) | GENERAL_ACT_REQ;
usleep(35000);
display_backlight(true);
@@ -252,11 +262,11 @@ void display_color_screen(u32 color)
u32 *display_init_framebuffer()
{
// Sanitize framebuffer area.
memset((u32 *)0xC0000000, 0, 0x3C0000);
// This configures the framebuffer @ 0xC0000000 with a resolution of 1280x720 (line stride 768).
memset((u32 *)FB_ADDRESS, 0, 0x3C0000);
// This configures the framebuffer @ IPL_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer, 32);
usleep(35000);
return (u32 *)0xC0000000;
return (u32 *)FB_ADDRESS;
}

6
source/gfx/di.h
View File

@@ -20,6 +20,8 @@
#include "../utils/types.h"
#define FB_ADDRESS 0xC0000000
/*! Display registers. */
#define _DIREG(reg) ((reg) * 4)
@@ -233,7 +235,7 @@
#define UV_LINE_STRIDE(x) (((x) & 0xffff) << 16)
#define DC_WIN_DV_CONTROL 0x70E
// The following registers are A/B/C shadows of the 0xBC0/0xDC0/0xFC0 registers (see DISPLAY_WINDOW_HEADER).
/*! The following registers are A/B/C shadows of the 0xBC0/0xDC0/0xFC0 registers (see DISPLAY_WINDOW_HEADER). */
#define DC_WINBUF_START_ADDR 0x800
#define DC_WINBUF_ADDR_H_OFFSET 0x806
#define DC_WINBUF_ADDR_V_OFFSET 0x808
@@ -333,7 +335,7 @@
#define DSI_PAD_CONTROL_VS1_PDIO_CLK (1 << 8)
#define DSI_PAD_CONTROL_VS1_PDIO(x) (((x) & 0xf) << 0)
#define DSI_PAD_CONTROL_CD 0x4c
#define DSI_PAD_CONTROL_CD 0x4C
#define DSI_VIDEO_MODE_CONTROL 0x4E
#define DSI_PAD_CONTROL_1 0x4F

10
source/gfx/di.inl
View File

@@ -122,13 +122,13 @@ static const cfg_op_t _display_config_2[94] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_COMMAND, 0},
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_STOP},
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE | WIN_B_UPDATE | WIN_C_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ | WIN_B_ACT_REQ | WIN_C_ACT_REQ}
};
//DSI Init config.
static const cfg_op_t _display_config_3[61] = {
static const cfg_op_t _display_config_3[61] = {
{DSI_WR_DATA, 0},
{DSI_INT_ENABLE, 0},
{DSI_INT_STATUS, 0},
@@ -405,7 +405,7 @@ static const cfg_op_t _display_config_11[113] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_COMMAND, 0},
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_STOP},
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE | WIN_B_UPDATE | WIN_C_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ | WIN_B_ACT_REQ | WIN_C_ACT_REQ},
{DC_CMD_STATE_ACCESS, 0},
@@ -455,7 +455,7 @@ static const cfg_op_t _display_config_12[17] = {
{DC_CMD_STATE_ACCESS, 0},
{DC_CMD_INT_ENABLE, 0},
{DC_CMD_CONT_SYNCPT_VSYNC, 0},
{DC_CMD_DISPLAY_COMMAND, 0},
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_STOP},
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
@@ -548,7 +548,7 @@ static const cfg_op_t cfg_display_framebuffer[32] = {
{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, //768*2x768*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
{DC_WIN_BUFFER_CONTROL, 0},
{DC_WINBUF_SURFACE_KIND, 0}, //Regular surface.
{DC_WINBUF_START_ADDR, 0xC0000000}, //Framebuffer address.
{DC_WINBUF_START_ADDR, FB_ADDRESS}, //Framebuffer address.
{DC_WINBUF_ADDR_H_OFFSET, 0},
{DC_WINBUF_ADDR_V_OFFSET, 0},
{DC_WIN_WIN_OPTIONS, 0},

31
source/gfx/gfx.c
View File

@@ -19,7 +19,6 @@
#include <stdarg.h>
#include <string.h>
#include "gfx.h"
//#include "../utils/types.h"
static const u8 _gfx_font[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Char 032 ( )
@@ -129,12 +128,12 @@ void gfx_init_ctxt(u32 *fb, u32 width, u32 height, u32 stride)
void gfx_clear_grey(u8 color)
{
memset(gfx_ctxt.fb, color, 0x3C0000);
memset(gfx_ctxt.fb, color, gfx_ctxt.width * gfx_ctxt.height * 4);
}
void gfx_clear_color(u32 color)
{
for (u32 i = 0; i < gfx_ctxt.height * gfx_ctxt.stride; i++)
for (u32 i = 0; i < gfx_ctxt.width * gfx_ctxt.height; i++)
gfx_ctxt.fb[i] = color;
}
@@ -153,8 +152,7 @@ void gfx_con_init()
gfx_con.savedy = 0;
gfx_con.fgcol = 0xFFCCCCCC;
gfx_con.fillbg = 1;
//gfx_con.bgcol = 0xFF1B1B1B;
gfx_con.bgcol = 0xFF009600;
gfx_con.bgcol = 0xFF1B1B1B;
gfx_con.mute = 0;
}
@@ -217,7 +215,7 @@ void gfx_putc(char c)
}
}
gfx_con.x += 16;
if (gfx_con.x >= gfx_ctxt.width - 8) {
if (gfx_con.x >= gfx_ctxt.width - 16) {
gfx_con.x = 0;
gfx_con.y += 16;
}
@@ -229,9 +227,6 @@ void gfx_putc(char c)
if (gfx_con.y > gfx_ctxt.height - 16)
gfx_con.y = 0;
}
else if (c == '\r'){
gfx_con.x = 0;
}
break;
case 8:
default:
@@ -268,7 +263,6 @@ void gfx_putc(char c)
}
break;
}
}
void gfx_puts(const char *s)
@@ -371,8 +365,6 @@ void gfx_printf(const char *fmt, ...)
_gfx_putn(va_arg(ap, u32), 10, fill, fcnt);
break;
case 'p':
gfx_con.bgcol = va_arg(ap, u32);
break;
case 'P':
case 'x':
case 'X':
@@ -495,14 +487,6 @@ void gfx_line(int x0, int y0, int x1, int y1, u32 color)
}
}
void gfx_box(int x0, int y0, int x1, int y1, u32 color){
int i = y0;
while(y1 >= i){
gfx_line(x0, i, x1, i, color);
i++;
}
}
void gfx_set_rect_grey(const u8 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y)
{
u32 pos = 0;
@@ -516,6 +500,13 @@ void gfx_set_rect_grey(const u8 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos
}
}
void gfx_box(int x0, int y0, int x1, int y1, u32 color){
int i = y0;
while(y1 >= i){
gfx_line(x0, i, x1, i, color);
i++;
}
}
void gfx_set_rect_rgb(const u8 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y)
{

2
source/gfx/gfx.h
View File

@@ -41,13 +41,13 @@ void gfx_hexdump(u32 base, const u8 *buf, u32 len);
void gfx_set_pixel(u32 x, u32 y, u32 color);
void gfx_line(int x0, int y0, int x1, int y1, u32 color);
void gfx_box(int x0, int y0, int x1, int y1, u32 color);
void gfx_put_small_sep();
void gfx_put_big_sep();
void gfx_set_rect_grey(const u8 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y);
void gfx_set_rect_rgb(const u8 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y);
void gfx_set_rect_argb(const u32 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y);
void gfx_render_bmp_argb(const u32 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y);
void gfx_box(int x0, int y0, int x1, int y1, u32 color);
// Global gfx console and context.
gfx_ctxt_t gfx_ctxt;

225
source/gfx/tui.c Normal file
View File

@@ -0,0 +1,225 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "di.h"
#include "tui.h"
#include "../utils/btn.h"
#include "../config/config.h"
#include "../power/max17050.h"
#include "../utils/util.h"
#ifdef MENU_LOGO_ENABLE
extern u8 *Kc_MENU_LOGO;
#define X_MENU_LOGO 119
#define Y_MENU_LOGO 57
#define X_POS_MENU_LOGO 577
#define Y_POS_MENU_LOGO 1179
#endif //MENU_LOGO_ENABLE
extern hekate_config h_cfg;
void tui_sbar(bool force_update)
{
u32 cx, cy;
u32 timePassed = get_tmr_s() - h_cfg.sbar_time_keeping;
if (!force_update)
if (timePassed < 5)
return;
u8 prevFontSize = gfx_con.fntsz;
gfx_con.fntsz = 16;
h_cfg.sbar_time_keeping = get_tmr_s();
u32 battPercent = 0;
int battVoltCurr = 0;
gfx_con_getpos(&cx, &cy);
gfx_con_setpos(0, 1260);
max17050_get_property(MAX17050_RepSOC, (int *)&battPercent);
max17050_get_property(MAX17050_VCELL, &battVoltCurr);
gfx_clear_partial_grey(0x30, 1256, 24);
gfx_printf("%K%k Battery: %d.%d%% (%d mV) - Charge:", 0xFF303030, 0xFF888888,
(battPercent >> 8) & 0xFF, (battPercent & 0xFF) / 26, battVoltCurr);
max17050_get_property(MAX17050_Current, &battVoltCurr);
if (battVoltCurr >= 0)
gfx_printf(" %k+%d mA%k%K\n",
0xFF008800, battVoltCurr / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
else
gfx_printf(" %k-%d mA%k%K\n",
0xFF880000, (~battVoltCurr) / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
gfx_con.fntsz = prevFontSize;
gfx_con_setpos(cx, cy);
}
void tui_pbar(int x, int y, u32 val, u32 fgcol, u32 bgcol)
{
u32 cx, cy;
if (val > 200)
val = 200;
gfx_con_getpos(&cx, &cy);
gfx_con_setpos(x, y);
gfx_printf("%k[%3d%%]%k", fgcol, val, 0xFFCCCCCC);
x += 7 * gfx_con.fntsz;
for (int i = 0; i < (gfx_con.fntsz >> 3) * 6; i++)
{
gfx_line(x, y + i + 1, x + 3 * val, y + i + 1, fgcol);
gfx_line(x + 3 * val, y + i + 1, x + 3 * 100, y + i + 1, bgcol);
}
gfx_con_setpos(cx, cy);
// Update status bar.
tui_sbar(false);
}
void *tui_do_menu(menu_t *menu)
{
int idx = 0, prev_idx = 0, cnt = 0x7FFFFFFF;
gfx_clear_partial_grey(0x1B, 0, 1256);
tui_sbar(true);
#ifdef MENU_LOGO_ENABLE
gfx_set_rect_rgb(Kc_MENU_LOGO,
X_MENU_LOGO, Y_MENU_LOGO, X_POS_MENU_LOGO, Y_POS_MENU_LOGO);
#endif //MENU_LOGO_ENABLE
while (true)
{
gfx_con_setcol(0xFFCCCCCC, 1, 0xFF1B1B1B);
gfx_con_setpos(menu->x, menu->y);
gfx_printf("[%kLo%kck%kpi%kck%k_R%kCM%k v%d.%d.%d%k]\n\n",
colors[0], colors[1], colors[2], colors[3], colors[4], colors[5], 0xFFFF00FF, LP_VER_MJ, LP_VER_MN, LP_VER_BF, 0xFFCCCCCC);
// Skip caption or seperator lines selection.
while (menu->ents[idx].type == MENT_CAPTION ||
menu->ents[idx].type == MENT_CHGLINE)
{
if (prev_idx <= idx || (!idx && prev_idx == cnt - 1))
{
idx++;
if (idx > (cnt - 1))
{
idx = 0;
prev_idx = 0;
}
}
else
{
idx--;
if (idx < 0)
{
idx = cnt - 1;
prev_idx = cnt;
}
}
}
prev_idx = idx;
// Draw the menu.
for (cnt = 0; menu->ents[cnt].type != MENT_END; cnt++)
{
if (cnt == idx)
gfx_con_setcol(0xFF1B1B1B, 1, 0xFFCCCCCC);
else
gfx_con_setcol(0xFFCCCCCC, 1, 0xFF1B1B1B);
if (menu->ents[cnt].type != MENT_CHGLINE && menu->ents[cnt].type != MENT_MENU) {
if (cnt == idx)
gfx_printf(" %s", menu->ents[cnt].caption);
else
gfx_printf("%k %s", menu->ents[cnt].color, menu->ents[cnt].caption);
}
if(menu->ents[cnt].type == MENT_MENU)
gfx_printf("%k...", 0xFF0099EE);
gfx_printf(" \n");
}
gfx_con_setcol(0xFFCCCCCC, 1, 0xFF1B1B1B);
gfx_putc('\n');
// Print help and battery status.
gfx_con_setpos(0, 1127);
if (h_cfg.emummc_force_disable)
gfx_printf("%kNo emuMMC config found.\n", 0xFF800000);
gfx_con_setpos(0, 1191);
gfx_printf("%k VOL: Move up/down\n PWR: Select option%k", 0xFF555555, 0xFFCCCCCC);
display_backlight_brightness(h_cfg.backlight, 1000);
// Wait for user command.
u32 btn = btn_wait();
if (btn & BTN_VOL_DOWN && idx < (cnt - 1))
idx++;
else if (btn & BTN_VOL_DOWN && idx == (cnt - 1))
{
idx = 0;
prev_idx = -1;
}
if (btn & BTN_VOL_UP && idx > 0)
idx--;
else if (btn & BTN_VOL_UP && idx == 0)
{
idx = cnt - 1;
prev_idx = cnt;
}
if (btn & BTN_POWER)
{
ment_t *ent = &menu->ents[idx];
switch (ent->type)
{
case MENT_HANDLER:
ent->handler(ent->data);
break;
case MENT_MENU:
return tui_do_menu(ent->menu);
break;
case MENT_DATA:
return ent->data;
break;
case MENT_BACK:
return NULL;
break;
case MENT_HDLR_RE:
ent->handler(ent);
if (!ent->data)
return NULL;
break;
default:
break;
}
gfx_con.fntsz = 16;
gfx_clear_partial_grey(0x1B, 0, 1256);
#ifdef MENU_LOGO_ENABLE
gfx_set_rect_rgb(Kc_MENU_LOGO,
X_MENU_LOGO, Y_MENU_LOGO, X_POS_MENU_LOGO, Y_POS_MENU_LOGO);
#endif //MENU_LOGO_ENABLE
}
tui_sbar(false);
}
return NULL;
}

66
source/gfx/tui.h Normal file
View File

@@ -0,0 +1,66 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (C) 2018 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _TUI_H_
#define _TUI_H_
#include "../utils/types.h"
#include "gfx.h"
#define MENT_END 0
#define MENT_HANDLER 1
#define MENT_MENU 2
#define MENT_DATA 3
#define MENT_BACK 4
#define MENT_CAPTION 5
#define MENT_CHGLINE 6
#define MENT_HDLR_RE 7
typedef struct _ment_t
{
u32 type;
const char *caption;
u32 color;
void *data;
union
{
void(*handler)(void *);
struct _menu_t *menu;
};
} ment_t;
typedef struct _menu_t
{
ment_t *ents;
const char *caption;
u32 x;
u32 y;
} menu_t;
#define MDEF_END() {MENT_END}
#define MDEF_HANDLER(caption, _handler, color) { MENT_HANDLER, caption, color, NULL, { .handler = _handler } }
#define MDEF_HANDLER_EX(caption, data, _handler, color) { MENT_HANDLER, caption, color, data, { .handler = _handler } }
#define MDEF_MENU(caption, _menu) { MENT_MENU, caption, 0, NULL, { .menu = _menu } }
#define MDEF_BACK() { MENT_BACK, "Back" }
#define MDEF_CAPTION(caption, color) { MENT_CAPTION, caption, color }
#define MDEF_CHGLINE() {MENT_CHGLINE}
void tui_sbar(bool force_update);
void tui_pbar(int x, int y, u32 val, u32 fgcol, u32 bgcol);
void *tui_do_menu(menu_t *menu);
#endif